Two-dimensional protein crystals for solar energy conversion

Controlled electron transfer by molecular wires embedded in ultrathin insulating membranes for driving redox catalysis

Organic bilayers or amorphous silica films of a few nanometer thickness featuring embedded molecular wires offer opportunities for chemically separating while at the same time electronically connecting photo- or electrocatalytic components. Such ultrathin membranes enable the integration of components for which direct coupling is not sufficiently efficient or stable. Photoelectrocatalytic systems for the generation or utilization of renewable energy are among the most prominent ones for which ultrathin separation layers open up new approaches for component integration for improving efficiency. Recent advances in the assembly and spectroscopic, microscopic, and photoelectrochemical characterization have enabled the systematic optimization of the structure, energetics, and density of embedded molecular wires for maximum charge transfer efficiency. The progress enables interfacial designs for the nanoscale integration of the incompatible oxidation and reduction catalysis environments of artificial photosystems and of microbial (or biomolecular)-abiotic systems for renewable energy.

Observation of anomalous carotenoid and blind chlorophyll activations in photosystem I under synthetic membrane confinements

The role of natural thylakoid membrane confinements in architecting the robust structural and electrochemical properties of PSI is not fully understood. Most PSI studies till date extract the proteins from their natural confinements that can lead to non-native conformations. Recently our group had successfully reconstituted PSI in synthetic lipid membranes using detergent-mediated liposome solubilizations. In this study, we investigate the alterations in chlorophylls and carotenoids interactions and reorganization in PSI based on spectral property changes induced by its confinement in anionic DPhPG and zwitterionic DPhPC phospholipid membranes. To this end, we employ a combination of absorption, fluorescence, and circular dichroism (CD) spectroscopic measurements. Our results indicate unique activation and alteration of photoresponses from the PSI carotenoid (Car) bands in PSI-DPhPG proteoliposomes that can tune the Excitation Energy Transfer (EET), otherwise absent in PSI at non-native environments. Specifically, we observe broadband light harvesting via enhanced absorption in the otherwise non-absorptive green region (500-580 nm) of the Chlorophylls (Chl) along with ~64% increase in the full-width half maximum of the Qy band (650-720 nm). The CD results indicate enhanced Chl-Chl and Chl-Car interactions along with conformational changes in protein secondary structures. Such distinct changes in the Car and Chl bands are not observed in PSI confined in DPhPC. The fundamental insights into membrane microenvironments tailoring PSI subunits reorganization and interactions provide novel strategies for tuning photoexcitation processes and rational designing of biotic-abiotic interfaces in PSI-based photoelectrochemical energy conversion systems.

"Invisible" Detergents Enable a Reliable Determination of Solution Structures of Native Photosystems by Small-Angle Neutron Scattering

Photosystems I (PSI) and II (PSII) are pigment-protein complexes capable of performing the light-induced charge separation necessary to convert solar energy into a biochemically storable form, an essential step in photosynthesis. Small-angle neutron scattering (SANS) is unique in providing structural information on PSI and PSII in solution under nearly physiological conditions without the need for crystallization or temperature decrease. We show that the reliability of the solution structure critically depends on proper contrast matching of the detergent belt surrounding the protein. Especially, specifically deuterated ("invisible") detergents are shown to be properly matched out in SANS experiments by a direct, quantitative comparison with conventional matching strategies. In contrast, protonated detergents necessarily exhibit incomplete matching so that related SANS results systematically overestimate the size of the membrane protein under study. While the solution structures obtained are close to corresponding high-resolution structures, we show that temperature and solution state lead to individual structural differences compared with high-resolution structures. We attribute these differences to the presence of a manifold of conformational substates accessible by protein dynamics under physiological conditions.

Noncovalent Self-Assembly of Protein Crystals with Tunable Structures

Engineering noncovalent interactions for assembling nonspherical proteins into supramolecular architectures with tunable morphologies and dynamics is challenging due to the structural heterogeneity and complexity of protein surfaces. Herein, we employed an anisotropic building block l-rhamnulose-1-phosphate aldolase (RhuA) to control supramolecular polymorphism in highly ordered protein assemblies by introducing histidine residues. Histidine-based π-π stacking interactions enabled thermodynamically controlled self-organization of RhuA to form three-dimensional (3D) nanoribbons and crystals. Self-assembly of different 3D crystal phases was kinetically modulated by the strong metal ion-histidine chelation, and double-helical protein superstructures were formed by engineering increased histidine interactions at the RhuA binding surface. Their structural properties and dynamics were determined via fluorescence microscopy, transmission electron microscopy, atomic force microscopy, and small-angle X-ray scattering. This work is aimed at expanding the toolbox for the programming of tunable, highly ordered, protein superstructures and increasing the understanding of the mechanisms of protein interfacial interactions.

Closing the Gap for Electronic Short-Circuiting: Photosystem I Mixed Monolayers Enable Improved Anisotropic Electron Flow in Biophotovoltaic Devices

Well-defined assemblies of photosynthetic protein complexes are required for an optimal performance of semi-artificial energy conversion devices, capable of providing unidirectional electron flow when light-harvesting proteins are interfaced with electrode surfaces. We present mixed photosystem I (PSI) monolayers constituted of native cyanobacterial PSI trimers in combination with isolated PSI monomers from the same organism. The resulting compact arrangement ensures a high density of photoactive protein complexes per unit area, providing the basis to effectively minimize short-circuiting processes that typically limit the performance of PSI-based bioelectrodes. The PSI film is further interfaced with redox polymers for optimal electron transfer, enabling highly efficient light-induced photocurrent generation. Coupling of the photocathode with a [NiFeSe]-hydrogenase confirms the possibility to realize light-induced H2 evolution.

Encapsulation of Photosystem I in Organic Microparticles Increases Its Photochemical Activity and Stability for Ex Vivo Photocatalysis

Photosystem I (PSI) is a pigment binding multisubunit protein complex involved in the light phase of photosynthesis, catalyzing a light-dependent electron transfer reaction from plastocyanin to ferredoxin. PSI is characterized by a photochemical efficiency close to one, suggesting its possible application in light-dependent redox reaction in an extracellular context. The stability of PSI complexes isolated from plant cells is however limited if not embedded in a protective environment. Here we show an innovative solution for exploiting the photochemical properties of PSI, by encapsulation of isolated PSI complexes in PLGA (poly lactic-co-glycolic acid) organic microparticles. These encapsulated PSI complexes were able to catalyze light-dependent redox reactions with electron acceptors and donors outside the PLGA microparticles. Moreover, PSI complexes encapsulated in PLGA microparticles were characterized by a higher photochemical activity and stability compared with PSI complexes in detergent solution, suggesting their possible application for ex vivo photocatalysis.

Conjugated Polymers for Assessing and Controlling Biological Functions

The field of organic bioelectronics is advancing rapidly in the development of materials and devices to precisely monitor and control biological signals. Electronics and biology can interact on multiple levels: organs, complex tissues, cells, cell membranes, proteins, and even small molecules. Compared to traditional electronic materials such as metals and inorganic semiconductors, conjugated polymers (CPs) have several key advantages for biological interactions: tunable physiochemical properties, adjustable form factors, and mixed conductivity (ionic and electronic). Herein, the use of CPs in five biologically oriented research topics, electrophysiology, tissue engineering, drug release, biosensing, and molecular bioelectronics, is discussed. In electrophysiology, implantable devices with CP coating or CP-only electrodes are showing improvements in signal performance and tissue interfaces. CP-based scaffolds supply highly favorable static or even dynamic interfaces for tissue engineering. CPs also enable delivery of drugs through a variety of mechanisms and form factors. For biosensing, CPs offer new possibilities to incorporate biological sensing elements in a conducting matrix. Molecular bioelectronics is today used to incorporate (opto)electronic functions in living tissue. Under each topic, the limits of the utility of CPs are discussed and, overall, the major challenges toward implementation of CPs and their devices to real-world applications are highlighted.

Extended Operational Lifetime of a Photosystem-Based Bioelectrode

The development of bioelectrochemical assemblies for sustainable energy transformation constitutes an increasingly important field of research. Significant progress has been made in the development of semiartificial devices for conversion of light into electrical energy by integration of photosynthetic biomolecules on electrodes. However, sufficient long-term stability of such biophotoelectrodes has been compromised by reactive species generated under aerobic operation. Therefore, meeting the requirements of practical applications still remains unsolved. We present the operation of a photosystem I-based photocathode using an electron acceptor that enables photocurrent generation under anaerobic conditions as the basis for a biodevice with substantially improved stability. A continuous operation lifetime considerably superior to previous reports and at higher light intensities is paving the way toward the potential application of semiartificial energy conversion devices.

Disulfide-mediated reversible two-dimensional self-assembly of protein nanocages

Disulfide-mediated 2D protein self-assembly was achieved by single point mutation of hot spots at the C₄ interface of ferritin.

Plasmon-Enhanced Photocurrent from Photosystem I Assembled on Ag Nanopyramids

Plasmonic metal nanostructures have been known to tune optoelectronic properties of fluorophores. Here, we report the first-ever experimental observation of plasmon-induced photocurrent enhancements from Photosystem I (PSI) immobilized on Fischer patterns of silver nanopyramids (Ag-NP). To this end, the plasmonic peaks of Ag-NP were tuned to match the PSI absorption peaks at ∼450 and ∼680 nm wavelengths. Specifically, the plasmon-enhanced photocurrents indicate enhancement factors of ∼6.5 and ∼5.8 as compared to PSI assembly on planar Ag substrates for nominal excitation wavelengths of 660 and 470 nm, respectively. The comparable enhancement factors from both 470 and 660 nm excitations, in spite of a significantly weaker plasmon absorption peak at ∼450 nm for the Ag-NP structures, can be rationalized by previously reported excessive plasmon-induced fluorescence emission losses from PSI in the red region as compared to the blue region of the excitation wavelengths.

Self-Assembly of Protein Crystals with Different Crystal Structures Using Tobacco Mosaic Virus Coat Protein as a Building Block

In this work, a typical cylinder-shaped tobacco mosaic virus coat protein (TMVCP) is employed as an anisotropic building block to assemble into triclinic and hexagonal close-packed (HCP) protein crystals by introducing cysteine residues at the 1 and 3 sites and four histidine residues at the C-terminal, respectively. The engineered functional groups of cysteine and histidine in the TMVCP and the self-assembly conditions determine the thermodynamics and kinetics in the self-assembly process for forming different crystal structures. The results show that the TMVCPs are thermodynamically driven to form triclinic crystals due to the formation of disulfide bonds between neighboring TMVCPs. On the other hand, the self-assembly of HCP crystals is kinetically directed by the strong metal-histidine chelation. This work not only greatly expands TMVCP for fabricating promising nanomaterials but also represents an approach to adjusting the protein crystal structures by tuning the thermodynamics and kinetics during crystallization.

Photoelectrochemical Complexes of Fucoxanthin-Chlorophyll Protein for Bio-Photovoltaic Conversion with a High Open-Circuit Photovoltage

Open-circuit photovoltage (V_oc ) is among the critical parameters for achieving an efficient light-to-charge conversion in existing solar photovoltaic devices. Natural photosynthesis exploits light-harvesting chlorophyll (Chl) protein complexes to transfer sunlight energy efficiently. We describe the exploitation of photosynthetic fucoxanthin-chlorophyll protein (FCP) complexes for realizing photoelectrochemical cells with a high V_oc . An antenna-dependent photocurrent response and a V_oc up to 0.72 V are observed and demonstrated in the bio-photovoltaic devices fabricated with photosynthetic FCP complexes and TiO₂ nanostructures. Such high V_oc is determined by fucoxanthin in FCP complexes, and is rarely found in photoelectrochemical cells with other natural light-harvesting antenna. We think that the FCP-based bio-photovoltaic conversion will provide an opportunity to fabricate environmental benign photoelectrochemical cells with high V_oc , and also help improve the understanding of the essential physics behind the light-to-charge conversion in photosynthetic complexes.

Solution structure of monomeric and trimeric photosystem I of Thermosynechococcus elongatus investigated by small-angle X-ray scattering

The structure of monomeric and trimeric photosystem I (PS I) of Thermosynechococcus elongatus BP1 (T. elongatus) was investigated by small-angle X-ray scattering (SAXS). The scattering data reveal that the protein-detergent complexes possess radii of gyration of 58 and 78 Å in the cases of monomeric and trimeric PS I, respectively. The results also show that the samples are monodisperse, virtually free of aggregation, and contain empty detergent micelles. The shape of the protein-detergent complexes can be well approximated by elliptical cylinders with a height of 78 Å. Monomeric PS I in buffer solution exhibits minor and major radii of the elliptical cylinder of about 50 and 85 Å, respectively. In the case of trimeric PS I, both radii are equal to about 110 Å. The latter model can be shown to accommodate three elliptical cylinders equal to those describing monomeric PS I. A structure reconstitution also reveals that the protein-detergent complexes are larger than their respective crystal structures. The reconstituted structures are larger by about 20 Å mainly in the region of the hydrophobic surfaces of the monomeric and trimeric PS I complexes. This seeming contradiction can be resolved by the addition of a detergent belt constituted by a monolayer of dodecyl-β-D-maltoside molecules. Assuming a closest possible packing, a number of roughly 1024 and 1472 detergent molecules can be determined for monomeric and trimeric PS I, respectively. Taking the monolayer of detergent molecules into account, the solution structure can be almost perfectly modeled by the crystal structures of monomeric and trimeric PS I.

Tuning the photoexcitation response of cyanobacterial Photosystem I via reconstitution into Proteoliposomes

The role of natural thylakoid membrane housing of Photosystem I (PSI), the transmembrane photosynthetic protein, in its robust photoactivated charge separation with near unity quantum efficiency is not fundamentally understood. To this end, incorporation of suitable protein scaffolds for PSI incorporation is of great scientific and device manufacturing interest. Areas of interest include solid state bioelectronics, and photoelectrochemical devices that require bio-abio interfaces that do not compromise the photoactivity and photostability of PSI. Therefore, the surfactant-induced membrane solubilization of a negatively charged phospholipid (DPhPG) with the motivation of creating biomimetic reconstructs of PSI reconstitution in DPhPG liposomes is studied. Specifically, a simple yet elegant method for incorporation of PSI trimeric complexes into DPhPG bilayer membranes that mimic the natural thylakoid membrane housing of PSI is introduced. The efficacy of this method is demonstrated via absorption and fluorescence spectroscopy measurements as well as direct visualization using atomic force microscopy. This study provides direct evidence that PSI confinements in synthetic lipid scaffolds can be used for tuning the photoexcitation characteristics of PSI. Hence, it paves the way for development of fundamental understanding of microenvironment alterations on photochemical response of light activated membrane proteins.

Influence of molecular structure on the antimicrobial function of phenylenevinylene conjugated oligoelectrolytes

Structure/property relationships were obtained to understand the antimicrobial function of conjugated oligoelectrolytes toward Gram-negative and Gram-positive bacteria.

Conjugated oligoelectrolytes (COEs) with phenylenevinylene (PV) repeat units are known to spontaneously intercalate into cell membranes. Twelve COEs, including seven structures reported here for the first time, were investigated for the relationship between their membrane disrupting properties and structural modifications, including the length of the PV backbone and the presence of either a tetraalkylammonium or a pyridinium ionic pendant group. Optical characteristics and interactions with cell membranes were determined using UV-Vis absorption and photoluminescence spectroscopies, and confocal microscopy. Toxicity tests on representative Gram-positive (Enterococcus faecalis) and Gram-negative (Escherichia coli) bacteria reveal generally greater toxicity to E. faecalis than to E. coli and indicate that shorter molecules have superior antimicrobial activity. Increased antimicrobial potency was observed in three-ring COEs appended with pyridinium ionic groups but not with COEs with four or five PV repeat units. Studies with mutants having cell envelope modifications indicate a possible charge based interaction with pyridinium-appended compounds. Fluorine substitutions on COE backbones result in structures that are less toxic to E. coli, while the addition of benzothiadiazole to COE backbones has no effect on increasing antimicrobial function. A weakly membrane-intercalating COE with only two PV repeat units allowed us to determine the synthetic limitations as a result of competition between solubility in aqueous media and association with cell membranes. We describe, for the first time, the most membrane disrupting structure achievable within two homologous series of COEs and that around a critical three-ring backbone length, structural modifications have the most effect on antimicrobial activity.

Self-assembly of coherently dynamic, auxetic, two-dimensional protein crystals

Two-dimensional (2D) crystalline materials possess unique structural, mechanical and electronic properties that make them highly attractive in many applications. Although there have been advances in preparing 2D materials that consist of one or a few atomic or molecular layers, bottom-up assembly of 2D crystalline materials remains a challenge and an active area of development. More challenging is the design of dynamic 2D lattices that can undergo large-scale motions without loss of crystallinity. Dynamic behaviour in porous three-dimensional (3D) crystalline solids has been exploited for stimuli-responsive functions and adaptive behaviour. As in such 3D materials, integrating flexibility and adaptiveness into crystalline 2D lattices would greatly broaden the functional scope of 2D materials. Here we report the self-assembly of unsupported, 2D protein lattices with precise spatial arrangements and patterns using a readily accessible design strategy. Three single- or double-point mutants of the C4-symmetric protein RhuA were designed to assemble via different modes of intermolecular interactions (single-disulfide, double-disulfide and metal-coordination) into crystalline 2D arrays. Owing to the flexibility of the single-disulfide interactions, the lattices of one of the variants ((C98)RhuA) are essentially defect-free and undergo substantial, but fully correlated, changes in molecular arrangement, yielding coherently dynamic 2D molecular lattices. (C98)RhuA lattices display a Poisson's ratio of -1-the lowest thermodynamically possible value for an isotropic material-making them auxetic.

Membrane permeabilization by conjugated oligoelectrolytes accelerates whole-cell catalysis

Conjugated oligoelectrolytes (COE) increase outer membrane permeability inEscherichia coli,improve transport of small molecules through the cell envelope and thus accelerate whole-cell catalysis.

Membrane-intercalating conjugated oligoelectrolytes: impact on bioelectrochemical systems

Conjugated oligoelectrolytes (COEs), molecules that are defined by a π-delocalized backbone and terminal ionic pendant groups, have been previously demonstrated to effectively reduce charge-injection/extraction barriers at metal/organic interfaces in thin-film organic-electronic devices. Recent studies demonstrate a spontaneous affinity of certain COEs to intercalate into, and align within, lipid bilayers in an ordered orientation, thereby allowing modification of membrane properties and the functions of microbes in bioelectrochemical and photosynthetic systems. Several reports have provided evidence of enhanced current generation and bioproduction. Mechanistic approaches suggest that COEs influence microbial extracellular electron transport to abiotic electrode surfaces via more than one proposed pathway, including direct electron transfer and meditated electron transfer. Molecular dynamics simulations as a function of molecular structure suggest that insertion of cationic COEs results in membrane thinning as the lipid phosphate head groups are drawn toward the center of the bilayer. Since variations in molecular structures, especially the length of the conjugated backbone, distribution of ionic groups, and hydrophobic substitutions, show an effect on their antimicrobial properties, preferential cell localization, and microbial selection, it is promising to further design novel membrane-intercalating molecules based on COEs for practical applications, including energy generation, environmental remediation, and antimicrobial treatment.