Performance Enhancement of Silicone Rubber Using Superhydrophobic Silica Aerogel with Robust Nanonetwork Structure and Outstanding Interfacial Effect

The application of high-performance rubber nanocomposites has attracted wide attention, but its development is limited by the imbalance of interface and network effects caused by fillers. Herein, an ultrastrong polymer nanocomposite is successfully designed by introducing a superhydrophobic and mesoporous silica aerogel (HSA) as the filler to poly(methyl vinyl phenyl) siloxane (PVMQ), which increased the PVMQ elongation at break (∼690.1%) by ∼9.3 times and the strength at break (∼6.6 MPa) by ∼24.3 times. Furthermore, HSA/PVMQ with a high dynamic storage modulus (G'0) of ∼12.2 MPa and high Payne effect (ΔG') of ∼9.4 MPa is simultaneously achieved, which is equivalent to 2-3 times that of commercial fumed silica reinforced PVMQ. The superior performance is attributed to the filler-rubber interfacial interaction and the robust filler-rubber entanglement network which is observed by scanning electron microscopy. When the HSA-PVMQ entanglement network is subjected to external stress, both the HSA and bound-PVMQ chains are synergistically involved in resisting structural evolution, resulting in the maximized energy dissipation and deformation resistance through the desorption of the polymer chain and the slip/interpenetrating of the exchange hydrogen bond pairs. Hence, highly aggregated nanoporous silica aerogels may soon be widely used in the application of reinforced silicone rubber or other polymers shortly.

Interfacial Metal-Support Interaction and Catalytic Performance of Perovskite LaCrO3-Supported Ru Catalyst

Interfacial metal-support interaction (MSI) significantly affects the dispersion of active metals on the surface of the catalyst support and impacts catalyst performance. Understanding MSI is crucial for developing highly active and stable catalysts with a low metal loading, particularly for noble metal catalysts. In this work, we synthesized LaRuxCr1-xO3 catalysts with low Ru loading (x = 0.005, 0.01, and 0.02) using the sol-gel self-combustion method. We found that all of the Ru atoms immediately above or below the metal-support interface are closely bonded to the perovskite LaCrO3 surface lattice through Ru-O bonds, enhancing the MSI via interfacial reaction and charge transfer mechanisms. We identified a variety of Ru species, including small 3D Ru nanoparticles, 2D dispersed Ru surface atoms, and even 0D Ru single atoms. These highly dispersed Ru species exhibit high activity and stability under dry reforming of methane (DRM) conditions. The LaRu0.01Cr0.99O3 catalyst with very low Ru loading (0.42 wt %) was stable over a 50 h DRM test and the carbon deposition was negligible. The CH4 and CO2 conversions at 750 °C reached 83 and 86%, respectively, approaching the theoretical thermodynamic equilibrium values.

Suppressing Dielectric Loss in MXene/Polymer Nanocomposites through Interfacial Interactions

Although numerous polymer-based composites exhibit excellent dielectric permittivity, their dielectric performance in various applications is severely hampered by high dielectric loss induced by interfacial space charging and a leakage current. Herein, we demonstrate that embedding molten salt etched MXene into a poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE))/poly(methyl methacrylate) (PMMA) hybrid matrix induces strong interfacial interactions, forming a close-packed inner polymer layer and leading to significantly suppressed dielectric loss and markedly increased dielectric permittivity over a broad frequency range. The intensive molecular interaction caused by the dense electronegative functional terminations (-O and -Cl) in MXene results in restricted polymer chain movement and dense molecular arrangement, which reduce the transportation of the mobile charge carriers. Consequently, compared to the neat polymer, the dielectric constant of the composite with 2.8 wt % MXene filler increases from ∼52 to ∼180 and the dielectric loss remains at the same value (∼0.06) at 1 kHz. We demonstrate that the dielectric loss suppression is largely due to the formation of close-packed interfaces between the MXene and the polymer matrix.

Use of Interfacial Interactions and Complexation of Carbon Dots to Construct Ultra-Robust and Efficient Photothermal Film From Micro-Carbonized Polysaccharides

Solar energy conversion technologies, particularly solar-driven photothermal conversion, are both clean and manageable. Although much progress has been made in designing solar-driven photothermal materials, significant challenges remain, not least the photobleaching of organic dyes. To tackle these issues, micro-carbonized polysaccharide chains, with carbon dots (CDs) suspended from the chains, are conceived, just like grapes or tomatoes hanging from a vine. Carbonization of sodium carboxymethyl cellulose (CMC) produces just such a structure (termed CMC-g-CDs), which is used to produce an ultra-stable, robust, and efficient solar-thermal film by interfacial interactions within the CMC-g-CDs. The introduction of the CDs into the matrix of the photothermal material effectively avoided the problem of photobleaching. Manipulating the interfacial interactions (such as electrostatic interactions, van der Waals interactions, π-π stacking, and hydrogen bonding) between the CDs and the polymer chains markedly enhances the mechanical properties of the photothermal film. The CMC-g-CDs are complexed with Fe3+ to eliminate leakage of the photothermal reagent from the matrix and to solve the problem of poor water resistance. The resulting film (CMC-g-CDs-Fe) has excellent prospects for practical application as a photothermal film.

Ni─Co─O─S Derived Catalysts on Hierarchical N-doped Carbon Supports with Strong Interfacial Interactions for Improved Hybrid Water Splitting Performance

Simultaneously improving electrochemical activity and stability is a long-term goal for water splitting. Herein, hierarchical N-doped carbon nanotubes on carbon nanowires derived from PPy are grown on carbon cloth, serving as a support for NiCo oxides/sulfides. The hierarchical electrodes annealed in N2 or H2/N2 display improved intrinsic activity and stability for hydrogen evolution reaction (HER) and glucose oxidation reaction. Compared with Pt/C||Ir/C in alkaline media, the glucose electrolysis assembled with electrodes exhibits a cell voltage of 1.38 V at 10 mA cm-2, durability for >12 h at 50 mA cm-2, and resistance to glucose/gluconic acid poisoning. In addition, electrocatalysts can also be applied in ethanol oxidation reactions. Systematic characterizations reveal the strong interactions between NiCo and N-doped carbon support-induced partial charge transfer at the interface and regulate the local electronic structure of active sites. Density functional theory calculations demonstrate that the synergistic effect between N-doped carbon supports, metallic NiCo, and NiCo oxides/sulfides optimize the adsorption energy of H2O and the H* free energy for HER. The energy barrier of the dehydrogenation of glucose effectively decreased. This work will attract attention to the role of metal-support interactions in enhancing the intrinsic activity and stability of electrocatalysts.

Giant Third-Order Nonlinear Hall Effect in Misfit Layer Compound (SnS)1.17(NbS2)3

The nonlinear Hall effect (NLHE) holds immense significance in recognizing the band geometry and its potential applications in current rectification. Recent discoveries have expanded the study from second-order to third-order nonlinear Hall effect (THE), which is governed by an intrinsic band geometric quantity called the Berry Connection Polarizability tensor. Here we demonstrate a giant THE in a misfit layer compound, (SnS)1.17(NbS2)3. While the THE is prohibited in individual NbS2 and SnS due to the constraints imposed by the crystal symmetry and their band structures, a remarkable THE emerges when a superlattice is formed by introducing a monolayer of SnS. The angular-dependent THE and its scaling relationship indicate that the phenomenon could be correlated to the band geometry modulation, concurrently with the symmetry breaking. The resulting strength of THE is orders of magnitude higher compared to recent studies. Our work illuminates the modulation of structural and electronic geometries for novel quantum phenomena through interface engineering.

Crucial role of interfacial interaction in 2D polar SiGe/GeC heterostructures

The planar charge transfer is a distinctive characteristic of the two-dimensional (2D) polar materials. When such 2D polar materials are involved in vertical heterostructures (VHs), in addition to the van der Waals (vdW) interlayer interaction, the interfacial interaction triggered by the in-plane charge transfer will play a crucial role. To deeply understand such mechanism, we conducted a comprehensive theoretical study focusing on the structural stability and electronic properties of 2D polar VHs built by commensurate SiGe/GeC bilayers with four species ordering patterns (classified as a C-group with patterns I and II and a Ge-group with patterns III and IV, respectively). It was found that the commensurate SiGe/GeC VHs are mainly stabilized by interfacial interactions (including the electrostatic interlayer bonding, the vdW force, as well as thesp2/sp3orbital hybridization), with the Ge-group being the most energetically favorable than the C-group. A net charge redistribution occurs between adjacent layers, which is significant (∼0.23-0.25 e cell-1) in patterns II and IV, but slightly small (∼0.05-0.09 e cell-1) in patterns I and III, respectively, forming spontaneousp-nheterojunctions. Such interlayer charge transfer could also lead to a polarization in the interfacial region, with the electron depletion (accumulation) close to the GeC layer and the electron accumulation (depletion) close to the SiGe layer in the C-group (the Ge-group). This type of interface dipoles could induce a built-in electric field and help to promote photogenerated electrons (holes) migration. Furthermore, a semi-metal nature with a tiny direct band gap at the SiGe layer and a semiconducting nature at the GeC layer indicate that the commensurate SiG/GeC VHs possess a type-I band alignment of heterojunction and have a wide spectrum of light absorption capabilities, indicating its promising applications for enhancing light-matter interaction and interfacial engineering.

Investigation of Interface Characteristics and Physisorption Mechanism in Quantum Dots/TiO2 Composite for Efficient and Sustainable Photoinduced Interfacial Electron Transfer

Owing to their superior stability compared to those of conventional molecular dyes, as well as their high UV-visible absorption capacity, which can be tuned to cover the majority of the solar spectrum through size adjustment, quantum dot (QD)/TiO2 composites are being actively investigated as photosensitizing components for diverse solar energy conversion systems. However, the conversion efficiencies and durabilities of QD/TiO2-based solar cells and photocatalytic systems are still inferior to those of conventional systems that employ organic/inorganic components as photosensitizers. This is because of the poor adsorption of QDs onto the TiO2 surface, resulting in insufficient interfacial interactions between the two. The mechanism underlying QD adsorption on the TiO2 surface and its relationship to the photosensitization process remain unclear. In this study, we established that the surface characteristics of the TiO2 semiconductor and the QDs (i.e., surface defects of the metal oxide and the surface structure of the QD core) directly affect the QD adsorption capacity by TiO2 and the interfacial interactions between the QDs and TiO2, which relates to the photosensitization process from the photoexcited QDs to TiO2 (QD* → TiO2). The interfacial interaction between the QDs and TiO2 is maximized when the shape/thickness-modulated triangular QDs are composited with defect-rich anatase TiO2. Comprehensive investigations through photodynamic analyses and surface evaluation using X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and photocatalysis experiments collectively validate that tuning the surface properties of QDs and modulating the TiO2 defect concentration can synergistically amplify the interfacial interaction between the QDs and TiO2. This augmentation markedly improved the efficiency of photoinduced electron transfer from the photoexcited QDs to TiO2, resulting in significantly increased photocatalytic activity of the QD/TiO2 composite. This study provides the first in-depth characterization of the physical adhesion of QDs dispersed on a heterogeneous metal-oxide surface. Furthermore, the prepared QD/TiO2 composite exhibits exceptional adsorption stability, resisting QD detachment from the TiO2 surface over a wide pH range (pH = 2-12) in aqueous media as well as in nonaqueous solvents during two months of immersion. These findings can aid the development of practical QD-sensitized solar energy conversion systems that require the long-term stability of the photosensitizing unit.

Advanced Thermoelectric Textiles for Power Generation: Principles, Design, and Manufacturing

Self-powered wearable thermoelectric (TE) devices significantly reduce the inconvenience caused to users, especially in daily use of portable devices and monitoring personal health. The textile-based TE devices (TETs) exhibit the excellent flexibility, deformability, and light weight, which fulfill demands of long-term wearing for the human body. In comparison to traditional TE devices with their longstanding research history, TETs are still in an initial stage of growth. In recent years, TETs to provide electricity for low-power wearable electronics have attracted increasing attention. This review summarizes the recent progress of TETs from the points of selecting TE materials, scalable fabrication methods of TE fibers/yarns and TETs, structure design of TETs and reported high-performance TETs. The key points to develop TETs with outstanding TE properties and mechanical performance and better than available optimization strategies are discussed. Furthermore, remaining challenges and perspectives of TETs are also proposed to suggest practical applications for heat harvesting from human body.

Aggregation Dynamics Characteristics of Seven Different Aβ Oligomeric Isoforms-Dependence on the Interfacial Interaction

The aggregation of β-amyloid (Aβ) peptides has been confirmed to be associated with the onset of Alzheimer's disease (AD). Among the three phases of Aβ aggregation, the lag phase has been considered to be the best time for early Aβ pathological deposition clinical intervention and prevention for potential patients with normal cognition. Aβ peptide exists in various lengths in vivo, and Aβ oligomer in the early lag phase is neurotoxic but polymorphous and metastable, depending on Aβ length (isoform), molecular weight, and specific phase, and therefore hardly characterized experimentally. To cope with the problem, molecular dynamics simulation was used to investigate the aggregation process of five monomers for each of the seven common Aβ isoforms during the lag phase. Results showed that Aβ(1-40) and Aβ(1-38) monomers aggregated faster than their truncated analogues Aβ(4-40) and Aβ(4-38), respectively. However, the aggregation rate of Aβ(1-42) was slower than that of its truncated analogues Aβ(4-42) rather than that of Aβpe(3-42). More importantly, Aβ(1-38) is first predicted as more likely to form stable hexamer than the remaining five Aβ isoforms, as Aβ(1-42) does. It is hydrophobic interaction mainly (>50%) from the interfacial β1 and β2 regions of two reactants, pentamer and monomer, aggregated by Aβ(1-38)/Aβ(1-42) rather than by other Aβ isoforms, that drives the hexamer stably as a result of the formation of the effective hydrophobic collapse. This paper provides new insights into the aggregation characteristics of Aβ with different lengths and the conditions necessary for Aβ to form oligomers with a high molecular weight in the early lag phase, revealing the dependence of Aβ hexamer formation on the specific interfacial interaction.

Interfacial Electron Engineering of PdSn-NbN/C for Highly Efficient Cleavage of the C-C Bonds in Alkaline Ethanol Electrooxidation

The splitting of the C-C bonds of ethanol remains a key issue to be addressed, despite tremendous efforts made over the past several decades. This study highlights the enhancement mechanism of inexpensive NbN-modified Pd1 Sn3 -NbN/C towards the C-C bonds cleavage for alkaline ethanol oxidation reaction (EOR). The optimal Pd1 Sn3 -NbN/C delivers a catalytic activity up to 43.5 times higher than that of commercial Pd/C and high carbonate selectivity (20.5%) toward alkaline EOR. Most impressively, the Pd1 Sn3 -NbN/C presents good durability even after 25 200 s of chronoamperometric testing. The enhanced catalytic performance is mainly due to the interfacial interaction between PdSn and NbN, demonstrated by multiple structural characterization results. In addition, in situ ATR-SEIRAS (Attenuated total reflection-surface enhanced infrared absorption spectroscopy) results suggest that NbN facilitates the C-C bonds cleavage towards the alkaline EOR, followed by the enhanced OH adsorption to promote the subsequent oxidation of C1 intermediates after doping Sn. DFT (density functional theory) calculations indicate that the activation barriers of the C-H bond cleavage in CH3 CH2 OH, CH3 CHOH, CH3 CHO, CH3 CO, CH2 CO, and the C-C bond cleavage in CH3 CO, CH2 CO, CHCO are evidently reduced and the removal of adsorbed CH3 CO and CO becomes easier on the PdSn-NbN/C catalyst surface.

Electronic Phosphide-Support Interactions in Carbon-Supported Molybdenum Phosphide Catalysts Derived from Metal-Organic Frameworks

Interfacial interaction in carbon-supported catalysts can offer geometric, electronic, and compositional effects that can be utilized to regulate catalytically active sites, while this is far from being systematically investigated in carbon-supported phosphide catalysts. Here, we proposed a novel concept of electronic phosphide-support interaction (EPSI), which was confirmed by using molybdenum phosphide (MoP) supported on nitrogen-phosphorus codoped carbon (NPC) as a model catalyst (MoP@NPC). Such a strong EPSI could not only stabilize MoP in a low-oxidation state under environmental conditions but also regulate its electronic structure, leading to reduced dissociation energy of the oxygen-containing intermediates and enhancing the catalytic activity for oxidative desulfurization. The removal of dibenzothiophene over the MoP@NPC was as high as 100% with a turnover frequency (TOF) value of 0.0027 s-1, which was 33 times higher than that of MoP without EPSI. This work will open new avenues for the development of high-performance supported phosphide catalysts.

Formation of Ohmic contacts between ferromagnetic Cr2Ge2Te6and two-dimensional metals

As a ferromagnetic semiconductor, two-dimensional (2D) Cr2Ge2Te6 holds significant implications for electronic and spintronic devices. To achieve 2D electronics, it is essential to integrate Cr2Ge2Te6 with 2D electrodes to form Schottky-barrier-free Ohmic contacts with enhanced carrier injection efficiency. Herein, by using first-principles calculations based on density-functional theory, we systematically investigate the structural, energetic, electronic and magnetic properties of 2D heterojunctions by combining Cr2Ge2Te6 with a series of 2D metals, including graphene, ZrCl, NbS2, TaS2, TaSe2, Zn3C2, Hg3C2, and Zr2N. Results show that NbS2, TaS2, TaSe2, Zn3C2, Hg3C2, and Zr2N form Ohmic contacts with Cr2Ge2Te6, in contrast to graphene and ZrCl that exhibit a finite Schottky barrier. By examining the tunneling barriers and Fermi level shift, we reveal that the heterojunctions with Zn3C2 and Hg3C2 as electrodes exhibit advantages of both high electron injection efficiency and spin injection efficiency, for which an apparent decrease of the magnetic moment of Cr atoms in Cr2Ge2Te6 can be observed. These findings not only provide physical insights into the role of interfacial interaction in regulating the physical properties of 2D heterojunctions, but also pave way for the development of high-performance spintronic nanodevices for practical implementation.

Development of Stereocomplex Polylactide Nanocomposites as an Advanced Class of Biomaterials-A Review

This review paper analyzes the development of advanced class polylactide (PLA) materials through a combination of stereocomplexation and nanocomposites approaches. The similarities in these approaches provide the opportunity to generate an advanced stereocomplex PLA nanocomposite (stereo-nano PLA) material with various beneficial properties. As a potential "green" polymer with tunable characteristics (e.g., modifiable molecular structure and organic-inorganic miscibility), stereo-nano PLA could be used for various advanced applications. The molecular structure modification of PLA homopolymers and nanoparticles in stereo-nano PLA materials enables us to encounter stereocomplexation and nanocomposites constraints. The hydrogen bonding of D- and L-lactide fragments aids in the formation of stereococomplex crystallites, while the hetero-nucleation capabilities of nanofillers result in a synergism that improves the physical, thermal, and mechanical properties of materials, including stereocomplex memory (melt stability) and nanoparticle dispersion. The special properties of selected nanoparticles also allow the production of stereo-nano PLA materials with distinctive characteristics, such as electrical conductivity, anti-inflammatory, and anti-bacterial properties. The D- and L-lactide chains in PLA copolymers provide self-assembly capabilities to form stable nanocarrier micelles for encapsulating nanoparticles. This development of advanced stereo-nano PLA with biodegradability, biocompatibility, and tunability properties shows potential for use in wider and advanced applications as a high-performance material, in engineering field, electronic, medical device, biomedical, diagnosis, and therapeutic applications.

Skinless Polyphenylene Sulfide Foam with Enhanced Thermal Insulation Properties Fabricated by Constructing Aligned Gas Barrier Layers for Surface-Constrained sc-CO2 Foaming

A solid skin layer inevitably forms on the foam surface for supercritical carbon dioxide (sc-CO₂) foaming technology, leading to deterioration of some inherent properties of polymeric foams. In this work, skinless polyphenylene sulfide (PPS) foam was fabricated with a surface-constrained sc-CO₂ foaming method by innovatively constructing aligned epoxy resin/ferromagnetic graphene oxide composites (EP/GO@Fe₃O₄) as a CO₂ barrier layer under a magnetic field. Introduction of GO@Fe₃O₄ and its ordered alignment led to an obvious decrease in the CO₂ permeability coefficient of the barrier layer, a significant increase of the CO₂ concentration in the PPS matrix, and a decrease of desorption diffusivity in the depressurization stage, suggesting that the composite layers effectively inhibited the escape of CO₂ dissolved in the matrix. Meanwhile, the strong interfacial interaction between the composite layer and the PPS matrix remarkably enhanced the heterogeneous nucleation of cells at the interface, resulting in elimination of the solid skin layer and formation of an obvious cellular structure on the foam surface. Moreover, by the alignment of GO@Fe₃O₄ in EP, the CO₂ permeability coefficient of the barrier layer became much lower, and the cell density on the foam surface further increased with decreasing cell size, which was even higher than that of the cross section of foam, attributed to stronger heterogeneous nucleation at the interface than the homogeneous nucleation in the core region of the sample. As a result, the thermal conductivity of the skinless PPS foam reached as low as 0.0365 W/m·k, decreasing by 49.5% compared with that of regular PPS foam, showing a remarkable improvement in the thermal insulation properties of PPS foam. This work provided a novel and effective method for fabricating skinless PPS foam with enhanced thermal insulation properties.

Nacre-Inspired Strong MXene/Cellulose Fiber with Superior Supercapacitive Performance via Synergizing the Interfacial Bonding and Interlayer Spacing

MXene fibers are promising candidates for weaveable and wearable energy storage devices because of their good electrical conductivity and high theoretical capacitance. Herein, we propose a nacre-inspired strategy for simultaneously improving the mechanical strength, volumetric capacitance, and rate performance of MXene-based fibers through synergizing the interfacial interaction and interlayer spacing between Ti₃C₂T_X nanosheets. The optimized hybrid fibers (M-CMC-1.0%) with 99 wt % MXene loading exhibit an improved tensile strength of ∼81 MPa and a high specific capacitance of 885.0 F cm^-3 at 1 A cm^-3 together with an outstanding rate performance of 83.6% retention at 10 A cm^-3 (740.0 F cm^-3). As a consequence, the fiber supercapacitor (FSC) based on the M-CMC-1.0% hybrid delivers an output capacitance of 199.5 F cm^-3, a power density of 1186.9 mW cm^-3, and an energy density of 17.7 mWh cm^-3, respectively, implying its promising applications as portable energy storage devices for future wearable electronics.

High-Performance MoS2/SWCNT Composite Films for a Flexible Thermoelectric Power Generator

Single-walled carbon nanotube (SWCNT)-based thermoelectric materials have been extensively studied in the field of flexible wearable devices due to their high flexibility and excellent electrical conductivity (σ). However, poor Seebeck coefficient (S) and high thermal conductivity limit their thermoelectric application. In this work, free-standing MoS₂/SWCNT composite films with improved thermoelectric performance were fabricated by doping SWCNTs with MoS₂ nanosheets. The results demonstrated that the energy filtering effect at the MoS₂/SWCNT interface increased the S of composites. In addition, the σ of composites was also improved due to the reason that S-π interaction between MoS₂ and SWCNTs made good contact between MoS₂ and SWCNTs and improved carrier transport. Finally, the obtained MoS₂/SWCNT showed a maximum power factor of 131.9 ± 4.5 μW m^-1 K^-2 at room temperature with a σ of 680 ± 6.7 S cm^-1 and an S of 44.0 ± 1.7 μV K^-1 at a MoS₂/SWCNT mass ratio of 15:100. As a demonstration, a thermoelectric device composed of three pairs of p-n junctions was prepared, which exhibited a maximum output power of 0.43 μW at a temperature gradient of 50 K. Therefore, this work offers a simple method of enhancing the thermoelectric properties of SWCNT-based materials.

CoFe-Layered Double Hydroxide Coupled with Pd Particles for Electrocatalytic Ethanol Oxidation

Electrocatalytic efficiency and stability have emerged as critical issues in the ethanol oxidation reaction (EOR) of direct ethanol fuel cells. In this paper, Pd/Co₁Fe₃-LDH/NF as an electrocatalyst for EOR was prepared by a two-step synthetic strategy. Metal-oxygen bonds formed between Pd nanoparticles and Co₁Fe₃-LDH/NF guaranteed structural stability and adequate surface-active site exposure. More importantly, the charge transfer of the formed Pd-O-Co(Fe) bridge could effectively modulate the electrical structure of hybrids, improving the facilitated absorption of OH^- radicals and oxidation of CO_ads. Benefiting from the interfacial interaction, exposed active sites, and structural stability, the observed specific activity for Pd/Co₁Fe₃-LDH/NF (17.46 mA cm^-2) was 97 and 73 times higher than those of commercial Pd/C (20%) (0.18 mA cm^-2) and Pt/C (20%) (0.24 mA cm^-2), respectively. Besides, the j_f/j_r ratio representing the resistance to catalyst poisoning was 1.92 in the Pd/Co₁Fe₃-LDH/NF catalytic system. These results provide insights into optimizing the electronic interaction between metals and the support of electrocatalysts for EOR.

Electroregulation of graphene-nanofluid interactions to coenhance water permeation and ion rejection in vertical graphene membranes

Graphene oxide (GO) membranes with nanoconfined interlayer channels theoretically enable anomalous nanofluid transport for ultrahigh filtration performance. However, it is still a significant challenge for current GO laminar membranes to achieve ultrafast water permeation and high ion rejection simultaneously, because of the contradictory effect that exists between the water-membrane hydrogen-bond interaction and the ion-membrane electrostatic interaction. Here, we report a vertically aligned reduced GO (VARGO) membrane and propose an electropolarization strategy for regulating the interfacial hydrogen-bond and electrostatic interactions to concurrently enhance water permeation and ion rejection. The membrane with an electro-assistance of 2.5 V exhibited an ultrahigh water permeance of 684.9 L m^-2 h^-1 bar^-1, which is 1-2 orders of magnitude higher than those of reported GO-based laminar membranes. Meanwhile, the rejection rate of the membrane for NaCl was as high as 88.7%, outperforming most reported graphene-based membranes (typically 10 to 50%). Molecular dynamics simulations and density-function theory calculations revealed that the electropolarized VARGO nanochannels induced the well-ordered arrangement of nanoconfined water molecules, increasing the water transport efficiency, and thereby resulting in improved water permeation. Moreover, the electropolarization effect enhanced the surface electron density of the VARGO nanochannels and reinforced the interfacial attractive interactions between the cations in water and the oxygen groups and π-electrons on the VARGO surface, strengthening the ion-partitioning and Donnan effect for the electrostatic exclusion of ions. This finding offers an electroregulation strategy for membranes to achieve both high water permeability and high ion rejection performance.

Quantitative Assessment of Interfacial Interactions Governing Ultrafiltration Membrane Fouling by the Mixture of Silica Nanoparticles (SiO2 NPs) and Natural Organic Matter (NOM): Effects of Solution Chemistry

Mixtures of silica nanoparticles (SiO₂ NPs) and natural organic matter (NOM) are ubiquitous in natural aquatic environments and pose risks to organisms. Ultrafiltration (UF) membranes can effectively remove SiO₂ NP-NOM mixtures. However, the corresponding membrane fouling mechanisms, particularly under different solution conditions, have not yet been studied. In this work, the effect of solution chemistry on polyethersulfone (PES) UF membrane fouling caused by a SiO₂ NP-NOM mixture was investigated at different pH levels, ionic strengths, and calcium concentrations. The corresponding membrane fouling mechanisms, i.e., Lifshitz-van der Waals (LW), electrostatic (EL), and acid-base (AB) interactions, were quantitatively evaluated using the extended Derjaguin-Landau-Verwey-Overbeek (xDLVO) theory. It was found that the extent of membrane fouling increased with decreasing pH, increasing ionic strength, and increasing calcium concentration. The attractive AB interaction between the clean/fouled membrane and foulant was the major fouling mechanism in both the initial adhesion and later cohesion stages, while the attractive LW and repulsive EL interactions were less important. The change of fouling potential with solution chemistry was negatively correlated with the calculated interaction energy, indicating that the UF membrane fouling behavior under different solution conditions can be effectively explained and predicted using the xDLVO theory.

A pH and Temperature Dual-Responsive Microgel-Embedded, Adhesive, and Tough Hydrogel for Drug Delivery and Wound Healing

Stimuli-responsive hydrogels have attracted much attention over the past decade for potential bioengineering applications such as wound dressing and drug delivery. In this work, a pH and temperature dual-responsive microgel-embedded hydrogel has been fabricated by incorporating poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAAm-co-AAc) based microgel particles into polyacrylamide (PAAm)/chitosan (CS) semi-interpenetrating polymer network (semi-IPN), denoted as microgel@PAM/CS. The resultant hydrogel possesses excellent mechanical properties including stretchability, compressibility, and elasticity. In addition, the microgel@PAM/CS hydrogels can tightly adhere to the surfaces of a variety of tissues such as porcine skin, kidney, intestine, liver, and heart. Moreover, it shows controlled dual-drug release profile of both bovine serum albumin (BSA) (as a model protein) and sulfamethoxazole (SMZ), an antibiotic. Excellent antimicrobial properties are obtained for SMZ-loaded microgel@PAM/CS hydrogels. Compared with traditional drug administration methods such as by mouth, injection, and inhalation, the microgel@PAM/CS hydrogels possess advantages such as higher drug loading efficiency (by more than 80%) and controllable and sustained (over 48 h) release. The microgel@PAM/CS hydrogels can significantly enhance the wound healing process. This work provides a facile approach for the fabrication of multifunctional stimuli-responsive microparticle-embedded hydrogels with semi-IPN structures, and the as-prepared microgel@PAM/CS hydrogels have great potential for applications as smart wound dressing materials in biomedical engineering.

Molecular Understanding of the Interfacial Interaction and Corrosion Resistance between Epoxy Adhesive and Metallic Oxides on Galvanized Steel

The epoxy adhesive-galvanized steel adhesive structure has been widely used in various industrial fields, but achieving high bonding strength and corrosion resistance is a challenge. This study examined the impact of surface oxides on the interfacial bonding performance of two types of galvanized steel with Zn-Al or Zn-Al-Mg coatings. Scanning electron microscopy and X-ray photoelectron spectroscopy analysis showed that the Zn-Al coating was covered by ZnO and Al₂O₃, while MgO was additionally found on the Zn-Al-Mg coating. Both coatings exhibited excellent adhesion in dry environments, but after 21 days of water soaking, the Zn-Al-Mg joint demonstrated better corrosion resistance than the Zn-Al joint. Numerical simulations revealed that metallic oxides of ZnO, Al₂O₃, and MgO had different adsorption preferences for the main components of the adhesive. The adhesion stress at the coating-adhesive interface was mainly due to hydrogen bonds and ionic interactions, and the theoretical adhesion stress of MgO adhesive system was higher than that of ZnO and Al₂O₃. The corrosion resistance of the Zn-Al-Mg adhesive interface was mainly due to the stronger corrosion resistance of the coating itself, and the lower water-related hydrogen bond content at the MgO adhesive interface. Understanding these bonding mechanisms can lead to the development of improved adhesive-galvanized steel structures with enhanced corrosion resistance.

Ionic Conduction in Polymer-Based Solid Electrolytes

Good safety, high interfacial compatibility, low cost, and facile processability make polymer-based solid electrolytes promising materials for next-generation batteries. Key issues related to polymer-based solid electrolytes, such as synthesis methods, ionic conductivity, and battery architecture, are investigated in past decades. However, mechanistic understanding of the ionic conduction is still lacking, which impedes the design and optimization of polymer-based solid electrolytes. In this review, the ionic conduction mechanisms and optimization strategies of polymer-based solid electrolytes, including solvent-free polymer electrolytes, composite polymer electrolytes, and quasi-solid/gel polymer electrolytes, are summarized and evaluated. Challenges and strategies for enhancing the ionic conductivity are elaborated, while the ion-pair dissociation, ion mobility, polymer relaxation, and interactions at polymer/filler interfaces are highlighted. This comprehensive review is especially pertinent for the targeted enhancement of the Li-ion conductivity of polymer-based solid electrolytes.

Isomerism effects in relaxation dynamics of Au24(SR)16thiolate-protected gold nanoclusters

Understanding the excited state behavior of isomeric structures of thiolate-protected gold nanoclusters is still a challenging task. In this paper, based on grand unified model and ring model for describing thiolate-protected gold nanoclusters, we have predicted four isomers of Au₂₄(SR)₁₆nanoclusters. Density functional theory calculations show that the total energy of one of the predicted isomers is 0.1 eV lower in energy than previously crystallized isomer. The nonradiative relaxation dynamics simulations of Au₂₄(SH)₁₆isomers are performed to reveal the effects of structural isomerism on relaxation process of the lowest energy states, in which that most of the low-excited states consist of core states. In addition, crystallized isomer possesses the shorter e-h recombination time, whereas the most stable isomer has the longer recombination time, which may be attributed to the synergistic effect of nonadiabatic coupling and decoherence time. Our results could provide practical guidance to predict new gold nanoclusters for future experimental synthesis, and stimulate the exploration of atomic structures of same sized gold nanoclusters for photovoltaic and optoelectronic devices.

Optical Tracking of Surfactant-Tuned Bacterial Adhesion: a Single-Cell Imaging Study

Probing the interfacial dynamics of single bacterial cells in complex environments is crucial for understanding the microbial biofilm formation process and developing antifouling materials, but it remains a challenge. Here, we studied single bacterial interfacial behaviors modulated by surfactants via a plasmonic imaging technique. We quantified the adhesion strength of single bacterial cells by plasmonic measurement of potential energy profiles and dissected the mechanism of surfactant-tuned single bacterial adhesion. The presence of surfactant tuned single bacterial adhesion by increasing the thickness of extracellular polymeric substances (EPS) and reducing the degree of EPS cross-linking. The adhesion kinetics and equilibrium state of bacteria attached to the surface confirmed the decrease in adhesion strength tuned by surfactants. The information obtained is valuable for understanding the interaction mechanism between a single bacterial cell and surface, developing new biofilm control strategies, and designing anticontamination materials. IMPORTANCE Studying the interfacial dynamic of single bacteria in complex environments is crucial for understanding the microbial biofilm formation process and developing antifouling materials. However, quantifying the interactions between microorganisms and surfaces in the presence of pollution at the single-cell level remains a great challenge. This paper presents the analysis of single bacterial interfacial behaviors modulated by surfactants and quantification of the adhesion strength via a plasmonic imaging technique. Our study provided insights into the mechanism of initial bacterial adhesion, facilitating our understanding of the adhesion process at the microscopic scale, and is of great value for controlling membrane fouling biofilm formation.

Suppressed Layered-to-Spinel Phase Transition in δ-MnO2 via van der Waals Interaction for Highly Stable Zn/MnO2 Batteries

Although birnessite-type manganese dioxide (δ-MnO₂ ) with a large interlayer spacing (≈7 Å) is a promising cathode candidate for aqueous Zn/MnO₂ batteries, the poor structural stability associated with Zn²⁺ intercalation/deintercalation limits its further practical application. Herein, δ-MnO₂ ultrathin nanosheets are coupled with reduced graphene oxide (rGO) via van der Waals (vdW) self-assembly in a vacuum freeze-drying process. It is interesting to find that the presence of vdW interaction between δ-MnO₂ and rGO can effectively suppress the layered-to-spinel phase transition in δ-MnO₂ during cycling. As a result, the coupled δ-MnO₂ /rGO hybrid cathode with a sandwich-like heterostructure exhibits remarkable cycle performance with 80.1% capacity retained after 3000 cycles at 2.0 A g^-1 . The first principle calculations demonstrate that the strong interfacial interaction between δ-MnO₂ and rGO results in improved electron transfer and strengthened layered structure for δ-MnO₂ . This work establishes a viable strategy to mitigate the adverse layered-to-spinel phase transition in layered manganese oxide in aqueous energy storage systems.

Application Progress of PALS in the Correlation of Structure and Properties for Graphene/Polymer Nanocomposites

Giving a deep insight into the microstructure, and realizing the correlation between microstructure and properties is very important to the precise construction of high-performance graphene/polymer nanocomposites (GPN). For the promising application in microstructure characterization, much attention has been focused on the effective technique of positron annihilation lifetime spectroscopy (PALS). Based on the introduction of the basic principle, this review summarized the application progress of PALS in the correlation of microstructure and properties for GPN, especially for the characterization of free volume and interfacial interaction, and the correlation of these microstructures and properties.

Modification of Polymeric Carbon Nitride with Au-CeO2 Hybrids to Improve Photocatalytic Activity for Hydrogen Evolution

The construction of a multi-component heterostructure for promoting the exciton splitting and charge separation of conjugated polymer semiconductors has attracted increasing attention in view of improving their photocatalytic activity. Here, we integrated Au nanoparticles (NPs) decorated CeO2 (Au-CeO2) with polymeric carbon nitride (PCN) via a modified thermal polymerization method. The combination of the interfacial interaction between PCN and CeO2 via N-O or C-O bonds, with the interior electronic transmission channel built by the decoration of Au NPs at the interface between CeO2 and PCN, endows CeAu-CN with excellent efficiency in the transfer and separation of photo-induced carriers, leading to the enhancement of photochemical activity. The amount-optimized CeAu-CN nanocomposites are capable of producing ca. 80 μmol· H2 per hour under visible light irradiation, which is higher than that of pristine CN, Ce-CN and physical mixed CeAu and PCN systems. In addition, the photocatalytic activity of CeAu-CN remains unchanged for four runs in 4 h. The present work not only provides a sample and feasible strategy to synthesize highly efficient organic polymer composites containing metal-assisted heterojunction photocatalysts, but also opens up a new avenue for the rational design and synthesis of potentially efficient PCN-based materials for efficient hydrogen evolution.

Turning Electrocatalytic Activity Sites for the Oxygen Evolution Reaction on Brownmillerite to Oxyhydroxide

One of the major challenges that hinder the practical application of water electrolysis lies in the design of advanced electrocatalysts toward the anodic oxygen evolution reaction (OER). In this work, a pure Co-based precatalyst of CoOOH/brownmillerite derived from the surface activation of brownmillerite by a surface acid etching method exhibits high activity and stable electrical properties toward the OER. Different from oxyhydroxide derived from in situ surface reconstruction during the electrochemical process, the growth of highly crystalline CoOOH from the brownmillerite surface enables rational control over the surface/bulk structure as well as the concentration of active sites, and this structure can be well maintained and serve as highly active sites. The catalyst shows a low overpotential of 320 mV to obtain 10 mA cm^-2 and high stability in an alkaline electrolyte for the OER, which is comparable to the majority of Co-based electrocatalysts. Moreover, the appropriate interfacial interaction of the composite catalysts greatly contributes to the hydroxide insertion to improve water oxidation ability. This work proposes an effective strategy to develop high-performance metal oxide-based materials for the OER.

Interfacial Coupling and Modulation of van der Waals Heterostructures for Nanodevices

In recent years, van der Waals heterostructures (vdWHs) of two-dimensional (2D) materials have attracted extensive research interest. By stacking various 2D materials together to form vdWHs, it is interesting to see that new and fascinating properties are formed beyond single 2D materials; thus, 2D heterostructures-based nanodevices, especially for potential optoelectronic applications, were successfully constructed in the past few decades. With the dramatically increased demand for well-controlled heterostructures for nanodevices with desired performance in recent years, various interfacial modulation methods have been carried out to regulate the interfacial coupling of such heterostructures. Here, the research progress in the study of interfacial coupling of vdWHs (investigated by Photoluminescence, Raman, and Pump-probe spectroscopies as well as other techniques), the modulation of interfacial coupling by applying various external fields (including electrical, optical, mechanical fields), as well as the related applications for future electrics and optoelectronics, have been briefly reviewed. By summarizing the recent progress, discussing the recent advances, and looking forward to future trends and existing challenges, this review is aimed at providing an overall picture of the importance of interfacial modulation in vdWHs for possible strategies to optimize the device's performance.

Effect of Interfacial Interaction on the Demolding Deformation of Injection Molded Microfluidic Chips

During the demolding process, the interfacial interaction between the polymer and the metal mold insert will lead to the deformation of the micro-structure, which will directly affect the molding quality and performance of injection molded microfluidic chips. In this study, the demolding quality of micro-channels and micro-mixing structures of polycarbonate (PC), polymethyl methacrylate (PMMA), cyclic olefin copolymer (COC), and polystyrene (PS) microfluidic chips for heavy metal detection were investigated by molding experiments. The experimental results showed that the structures of microfluidic chips could be completely replicated. However, tensile deformation and fracture defects were observed at the edges of the micro-structures after demolding. Compared to the Ni mold insert, the calculation of the relative deviation percentages showed that the width of the micro-channel became larger and the depth became smaller, while the dimensions of the micro-mixing structure changes in the opposite direction. Subsequently, a molecular dynamics (MD) simulation model of polymer/nickel (Ni) mold insert for injection molding was established. The changes of adhesion work, demolding resistance and potential energy during demolding were analyzed. The simulation results showed that the polymer structures had some deformations such as necking, molecular chain stretching and voids under the action of adhesion work and demolding resistance. The difference in the contact area with the mold insert directly brought different interfacial interactions. In addition, the potential energy change of the polymer system could be used to quantitatively characterize the demolding deformation of the structure. Overall, the MD method is able to effectively explain the internal mechanisms of interfacial interactions, leading to the demolding deformation of polymer structures from the molecular/atomic scale.

In Situ Assay of Interfacial Interaction between ZnO Nanoparticles and Live Cell Disturbed by Surfactants

The interfacial interaction between pollutants and organisms is a critical process in controlling the environmental fates of pollutants; however, in situ assay of the interaction is still a great challenge. Here, in situ determination of dissociation constants (K_d) for ZnO nanoparticles (ZnO NPs) from live algal cells disturbed by different-charged surfactants was established using microscale thermophoresis (MST). Moreover, in situ measurement of the adhesion force between the ZnO NPs probe and live single cell was performed using an atomic force microscope (AFM). Results showed that the cationic cetyltrimethylammonium chloride (CTAC) and anionic sodium dodecylbenzenesulfonate (SDBS) increased but nonionic Triton X-100 (TX-100) decreased the adhesion of ZnO NPs on cells. However, the force signature exhibited a smooth single retracted peak at short distances in the SDBS- and TX-100-treated groups, distinguished from the "see-saw" pattern peak in the CTAC-treated groups. The extended Derjaguin-Landau-Verway-Overbeek (XDLVO) calculation further confirmed that SDBS and TX-100 mainly disturbed the short-range hydration on the NP-cell interface, while CTAC reduced the long-range electrostatic repulsion. Furthermore, an excellent linear correlation between Zn bioaccumulation and two parameters (K_d and adhesion force) indicated that NP-cell interfacial interactions affected Zn bioaccumulation. Thus, in situ assay provides a quantitative basis for the pollutant-organism interfacial interaction to evaluate the environmental fate and ecological risk of pollutants.

Designing Hybrid Mesoporous Pr/Tannate-Inbuilt ZIF8-Decorated MoS2 as Novel Nanoreservoirs toward Smart pH-Triggered Anti-corrosion/Robust Thermomechanical Epoxy Nanocoatings

For the first time, organic tannic acid (TA) molecules and then inorganic praseodymium (Pr) cations as corrosion inhibitors were successfully loaded into a zeolitic imidazolate framework (ZIF8)-type porous coordination polymer (PCP) decorated on molybdenum disulfide, MoS₂, (MS)-based transition metal dichalcogenides (TMDs) to create novel hybrid mesoporous Pr/TA-ZIF8@MS nanoreservoirs. Thereafter, the hybrid nanoreservoirs were embedded into the epoxy matrix for the preparation of smart pH-triggered nanocoatings. Characterizations of the Pr/TA-ZIF8@MS nanoreservoirs via Fourier transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric (TG), Brunauer-Emmett-Teller (BET), and field emission-scanning electron microscopy (FE-SEM)/energy-dispersive X-ray spectroscopy (EDS) experiments confirmed the fabrication of mesoporous structures comprising Pr/TA interfacial interactions with ZIF8-decorated MS nanoplatelets possessing high thermal stability and compact/dense configuration features with a framework reorientation. A remarkable smart release of the inhibited cations (Pr³⁺ and Zn²⁺) in the presence of inbuilt TA at both acidic and alkaline media was achieved under inductively coupled plasma (ICP) examination. The superior pH-triggered self-healing inhibition through the smart controlled-release of Pr, tannate, Zn, and imidazole inhibited species/complexes from EP/Pr-TA-ZIF8@MS via ligand exchange was obtained from electrochemical impedance spectroscopy (EIS) assessments of the scratched coatings during 72 h of saline immersion. In addition, the long-term barrier-induced corrosion prevention (log |Z|_10 mHz = 10.49 Ω·cm² after 63 days) of the EP/Pr-TA-ZIF8@MS was actualized. Moreover, efficient increments of the coating cross-link density (56.45%), tensile strength (63.6%), and toughness value (56.5%) compared to the Neat epoxy coating revealed noticeable thermomechanical properties of the EP/Pr-TA-ZIF8@MS.

π-d Electron-Coupled PBDIT/CdS Heterostructure Enables Hole Extraction for Efficient Photocatalytic Hydrogen Production

Construction of heterostructures is one of the most promising strategies for designing photocatalysts for highly efficient solar hydrogen (H₂) production because the introduction of an electron-donating counterpart contributes to more effective photon absorption, while the heterostructures benefit spatial carrier separation. However, the hole-transfer rate is usually 2-3 orders of magnitude slower than that of the electron-transfer rate within the heterostructures, ensuing serious charge recombination. Here, we find the energy band offset-driven charge-transfer behavior in a donor-acceptor (D-A)-conjugated polymer/CdS organic/inorganic heterostructure and realize hole-transfer improvement in cooperation with a further hole removal motif of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate. The photocatalytic H₂ production activity is increased by nearly 2 orders of magnitude with the apparent quantum yield hitting ca. 80% at 450 nm without co-catalysts. Ultrafast transient absorption together with surface photovoltage characterizations consolidates the hole extraction mechanism. The intimate bond formed at the interface between the polymer and the inorganic semiconductor acts as an interpenetrating network at the nanoscale level, thus providing a charge-transfer freeway for boosting charge separation.

Self-Organization of Tissue Growth by Interfacial Mechanical Interactions in Multilayered Systems

Morphogenesis is a spatially and temporally regulated process involved in various physiological and pathological transformations. In addition to the associated biochemical factors, the physical regulation of morphogenesis has attracted increasing attention. However, the driving force of morphogenesis initiation remains elusive. Here, it is shown that during the growth of multilayered tissues, a morphogenetic process can be self-organized by the progression of compression gradient stemmed from the interfacial mechanical interactions between layers. In tissues with low fluidity, the compression gradient is progressively strengthened during growth and induces stratification by triggering symmetric-to-asymmetric cell division reorientation at the critical tissue size. In tissues with high fluidity, compression gradient is dynamic and induces cell rearrangement leading to 2D in-plane morphogenesis instead of 3D deformation. Morphogenesis can be tuned by manipulating tissue fluidity, cell adhesion forces, and mechanical properties to influence the progression of compression gradient during the development of cultured cell sheets and chicken embryos. Together, the dynamics of compression gradient arising from interfacial mechanical interaction provides a conserved mechanism underlying morphogenesis initiation and size control during tissue growth.

Interface Mechanism and Splitting Characteristics of Fiber-Reinforced Cement-Solidified Aeolian Sand

Experimental studies on reinforcing aeolian sand with cement and fiber are lacking, and the interface mechanism and splitting characteristics thus remain unclear. Herein, the interface mechanism and splitting characteristics of fiber-reinforced, cement-solidified, aeolian sand were experimentally assessed to investigate whether glass fiber exhibits better properties as a reinforcing agent than traditional fiber-free cement-solidified aeolian sand, and whether aeolian sand is applicable as a base material in geotechnical engineering. The splitting experiments involved the use of fiber-reinforced, cement-solidified aeolian sand samples that were differentiated based on the mixing schemes used to formulate them. Based on the strengthening control technology effects on the structural performance of the fiber-reinforced, cement aeolian, sand-mixed matrix material, the internal physical and chemical mechanisms of structural performance evolution were revealed and analyzed using scanning electron microscopy images. The experimental results show that the splitting strength of the sample reaches its maximum value at a combination of 6 mm glass fiber, 3‱ fiber, and 10% cement contents. In fiber-reinforced cement-solidified aeolian sand, cement hydrate forms more needle-shaped crystal products. The crystals adhere to the fiber surfaces that interweave with each other to form a porous and dense network. Although this improves the bonding force between the fiber and aeolian sand particles, the fibers are prone to fracture and slippage during the splitting process. The three-dimensional network structure formed by overlapping fibers is critical for the improvement of the splitting strength. The study's findings will serve as benchmarks to achieve additional improvements in glass fiber-reinforced cement-solidified aeolian sand.

Investigation of a Highly Sensitive Surface-Enhanced Raman Scattering Substrate Formed by a Three-Dimensional/Two-Dimensional Graphene/Germanium Heterostructure

Three-dimensional graphene (3D-graphene) is used in surface-enhanced Raman spectroscopy (SERS) because of its plasmonic nanoresonator structure and good ability to interact with light. However, a thin (3-5 nm) layer of amorphous carbon (AC) inevitably appears as a template layer between the 3D-graphene and object substrate when the 3D-graphene layer is synthesized, weakening the enhancement factor. Herein, two-dimensional graphene (2D-graphene) is employed as a template layer to directly synthesize 3D-graphene on a germanium (Ge) substrate via plasma-assisted chemical vapor deposition, bypassing the formation of an AC layer. The interaction and photoinduced charge transfer ability of the 3D-graphene/Ge heterojunction with incident light are improved. Moreover, the high density of electronic states close to the Fermi level of the heterojunction induces the adsorbed probe molecules to efficiently couple to the 3D-graphene-based SERS substrate. Our experimental results imply that the lowest concentrations of rhodamine 6G and rhodamine B that can be detected on the 3D/2D-graphene/Ge SERS substrate correspond to 10^-10 M; for methylene blue, it is 10^-8 M. The detection limits of the 3D/2D-graphene/Ge SERS substrate with respect to 3-hydroxytyramine hydrochloride and melamine (in milk) are both less than 1 ppm. This work may provide a viable and convenient alternative method for preparing 3D-graphene SERS substrates. It also constitutes a new approach to developing SERS substrates with remarkable performance levels.

Constructing Chemical Interface Layers by Using Ionic Liquid in Graphene Oxide/Rubber Composites to Achieve High-Wear Resistance in Environmental-Friendly Green Tires

The harm caused by small rubber particles generated from tire abrasion to the atmosphere is receiving a continuing concern. For developing environmental-friendly tire tread materials with high wear resistance, building the strong interface between nano-fillers and rubber matrix is the primary challenge. Herein, ionic liquid (IL, 1-allyl-3-methylimidazole chloride) was used to modify graphene oxide (GO) by π-cation interaction and hydrogen bonding between IL and GO. Furthermore, an IL-GO/natural rubber (NR) masterbatch possessing fine dispersion of GO was prepared by the emulsion compounding method, and thereafter, a further compound with solution polymerized styrene butadiene rubber (SSBR) was fabricated for the tread rubber composite. Results showed that the double bond in the IL enhanced the cross-linking reaction during the vulcanization of rubber composites occurred at high temperature, leading to an elevated interfacial interaction between the IL-modified GO and the rubber macromolecules. Compared with silicon dioxide (SiO₂)-filled NR/SSBR composites, the cross-link density, 300% modulus, and tear strength of the IL-GO/SiO₂/NR/SSBR composites were increased by 10.2, 42.6, and 20.2%, respectively. Importantly, the wear resistance of the IL-GO/SiO₂/NR/SSBR composites was improved by 17.3%, ascribing to the strong interface between IL-GO and rubber macromolecules.

Molecular Dynamics Calculation on the Adhesive Interaction Between the Polytetrafluoroethylene Transfer Film and Iron Surface

During the friction process, the polytetrafluoroethylene (PTFE) adhered on the counterpart surface was known as the PTFE transfer film, which was fundamental to the lubricating performance of the PTFE. However, the adhesive interaction between the iron surface and the adhered PTFE transfer film is still unclear. In present study, molecular dynamics simulations were used to reveal the adhesive interaction between the iron surface and PTFE transfer film. Based on the atomic trajectories obtained through the molecular dynamics, the interaction energy, concentration profile, radial distribution function, and mean square displacement were calculated to analyze the structure of the interface. The negative values of the interaction energy demonstrated the adhesive interaction between the PTFE transfer film and Fe surfaces, resulting in the accumulation of the PTFE transfer film on the Fe surface. Among the (100) (110), and (111) surfaces of α-Fe (110) surface owns the strongest adhesive interaction with the PTFE transfer film. Compared with the original PTFE molecule, the chain broken PTFE, hydroxyl substituted PTFE, and carbonyl substituted PTFE exhibited stronger adhesive interaction with Fe surface. The adhesive interaction between the PTFE transfer film and Fe surfaces was mainly originated from the Fe atoms and the F atoms of the adsorbate PTFE transfer film, which was governed by the van der Waals force. The bonding distance between the Fe atom and the F atom of the adsorbate PTFE transfer film is around 2.8 Å. Moreover, the chain broken of PTFE molecule and the rise of temperature can remarkably increase the mobility of polymer chains in the interface system.

Phase-Change Composites Composed of Silicone Rubber and Pa@SiO2@PDA Double-Shelled Microcapsules with Low Leakage Rate and Improved Mechanical Strength

A kind of silicone rubber (SR)/paraffin (Pa)@silicon dioxide (SiO₂)@polydopamine (PDA) phase-change composite was prepared in this work. The double-shelled Pa@SiO₂@PDA phase-change microcapsules were constructed by oxidative self-polymerization of dopamine (DA) in Tris-HCl buffer solution. The effect of the DA content on the properties of Pa@SiO₂@PDA microcapsules and SR/Pa@SiO₂@PDA composites was researched. Due to the protective effect of SiO₂, PDA layer, and SR matrix, the SR/Pa@SiO₂@PDA composites have good leak-proofing performance, and the leakage rate of SR/Pa@SiO₂@PDA-2 is as low as 0.45%. Phase-change enthalpies of the Pa@SiO₂@PDA microcapsules and SR/Pa@SiO₂@PDA composites are reduced slightly with increasing DA content. Meanwhile, the composites displayed improved mechanical strength. The tensile strength of SR/Pa@SiO₂@PDA-2 can be up to 0.560 MPa, which is 1.85 times higher than the tensile strength of pure SR/Pa@SiO₂ because the interface compatibility between Pa@SiO₂ microcapsules and SR is improved through hydrogen bonding between the abundant groups on the PDA surface and the matrix. Moreover, the rough surface of the PDA-modified microcapsules also enhances the interface interaction through physical "interlocking". The new kind of SR/Pa@SiO₂@PDA composite can be used for thermal management.

Effect of π-π Stacking Interfacial Interaction on the Properties of Graphene/Poly(styrene-b-isoprene-b-styrene) Composites

Interfacial interaction is one of the most important factors in the construction of high-performance graphene-based elastomer composites. In this paper, graphene/poly (styrene-b-isoprene-b-styrene) (SIS) composites were prepared with solution mixing followed by an evaporation-induced self-assembly process. Various techniques such as scanning electron microscopy, UV-vis absorption spectra, tensile testing, Shore A hardness, surface resistance, thermal conductivity, and thermogravimetric analysis were conducted to characterize the microstructure and properties of the obtained composites. The results showed that the π-π stacking interfacial interaction between phenyl groups of SIS and graphene play an important role in the properties' improvement, and the effect of interfacial interaction on the properties was revealed.

Endowing Acceptable Mechanical Properties of Segregated Conductive Polymer Composites with Enhanced Filler-Matrix Interfacial Interactions by Incorporating High Specific Surface Area Nanosized Carbon Black

Tuning the high properties of segregated conductive polymer materials (CPCs) by incorporating nanoscale carbon fillers has drawn increasing attention in the industry and academy fields, although weak interfacial interaction of matrix-filler is a daunting challenge for high-loading CPCs. Herein, we present a facile and efficient strategy for preparing the segregated conducting ultra-high molecular weight polyethylene (UHMWPE)-based composites with acceptable mechanical properties. The interfacial interactions, mechanical properties, electrical properties and electromagnetic interference (EMI) shielding effectiveness (SE) of the UHMWPE/conducting carbon black (CCB) composites were investigated. The morphological and Raman mapping results showed that UHMWPE/high specific surface area CCB (h-CCB) composites demonstrate an obviously interfacial transition layer and strongly interfacial adhesion, as compared to UHMWPE/low specific surface area CCB (l-CCB) composites. Consequently, the high-loading UHMWPE/h-CCB composite (beyond 10 wt% CCB dosage) exhibits higher strength and elongation at break than the UHMWPE/l-CCB composite. Moreover, due to the formation of a densely stacked h-CCB network under the enhanced filler-matrix interfacial interactions, UHMWPE/h-CCB composite possesses a higher EMI SE than those of UHMWPE/l-CCB composites. The electrical conductivity and EMI SE value of the UHMWPE/h-CCB composite increase sharply with the increasing content of h-CCB. The EMI SE of UHMWPE/h-CCB composite with 10 wt% h-CCB is 22.3 dB at X-band, as four times that of the UHMWPE/l-CCB composite with same l-CCB dosage (5.6 dB). This work will help to manufacture a low-cost and high-performance EMI shielding material for modern electronic systems.

Binding Force and Site-Determined Desorption and Fragmentation of Antibiotic Resistance Genes from Metallic Nanomaterials

Interfacial interactions between antibiotic resistance genes (ARGs) and metallic nanomaterials (NMs) lead to adsorption and fragmentation of ARGs, which can provide new avenues for selecting NMs to control ARGs. This study compared the adsorptive interactions of ARGs (tetM-carrying plasmids) with two metallic NMs (ca. 20 nm), i.e., titanium dioxide (nTiO₂) and zero-valent iron (nZVI). nZVI had a higher adsorption rate (0.06 min^-1) and capacity (4.29 mg/g) for ARGs than nTiO₂ (0.05 min^-1 and 2.15 mg/g, respectively). No desorption of ARGs from either NMs was observed in the adsorptive background solution, isopropanol or urea solutions, but nZVI- and nTiO₂-adsorbed ARGs were effectively desorbed in NaOH and NaH₂PO₄ solutions, respectively. Molecular dynamics simulation revealed that nTiO₂ mainly bound with ARGs through electrostatic attraction, while nZVI bound with PO₄^3- of the ARG phosphate backbones through Fe-O-P coordination. The ARGs desorbed from nTiO₂ remained intact, while the desorbed ARGs from nZVI were splintered into small fragments irrelevant to DNA base composition or sequence location. The ARG removal by nZVI remained effective in the presence of PO₄^3-, natural organic matter, or protein at environmentally relevant concentrations and in surface water samples. These findings indicate that nZVI can be a promising nanomaterial to treat ARG pollution.

Improving the Physical-Mechanical Property of Dental Composites by Grafting Methacrylate-Polyhedral Oligomeric Silsesquioxane onto a Filler Surface

Endowing dental composites with excellent interfacial bonding through filler surface modification is pivotal to improve the physical-mechanical property and prolong the life of composite fillings. In this study, methacrylate-polyhedral oligomeric silsesquioxane (MA-POSS) acts as a "molecular bridge" between the commonly used SiO₂ particles and the methacrylate-based resin matrix via a thiol-ene click reaction to construct MA-POSS/SiO₂ (p-SiO₂) hybrid particles. Synthesized p-SiO₂ exhibited the roughest surface morphology and had more polymerizable groups, in comparison with SiO₂ and silanized SiO₂. Furthermore, the p-SiO₂ particles were used as a reinforcement to fabricate bisphenol A glycerolate dimethacrylate/tri(ethyleneglycol) dimethacrylate-based dental composites, where the SiO₂- and silanized SiO₂-filled composites served as the control groups, and the filler loading was fixed at 65 wt %. Results of the mechanical properties indicated that the hybrid p-SiO₂ particles significantly improved the flexural strength, flexural modulus, compressive strength, and work of fracture of dental composites, giving improvements of 251.2, 17.89, 122.3, and 1094%, respectively, over the SiO₂-filled composites due to the strong interfacial interaction between the resin matrix and p-SiO₂. Additionally, this optimal p-SiO₂-loaded composite also presented better polymerization shrinkage, acceptable degree of conversion, curing depth, and cell viability. Grafting of MA-POSS onto a filler surface is a promising filler surface modification to improve the resin matrix/filler interfacial interaction, leading to the enhanced overall performance of composites.

Core-Shell PMIA@PVdF-HFP/Al2O3 Nanofiber Mats In Situ Coaxial Electrospun on LiFePO4 Electrode as Matrices for Gel Electrolytes

Gel electrolytes show certain advantages over conventional liquid and solid electrolytes, but their mechanical strength and surface adhesion to the electrode remain to be improved. To address the challenges, we design and fabricate herein the core-shell nanofiber mats in situ on the LiFePO₄ electrode as matrices for gel electrolytes, in which the core is poly(m-phenylene isophthalamide) (PMIA) nanofiber and the shell are composite of Al₂O₃ nanoparticles and poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP). The mechanical property of the core-shell polymeric nanofiber mats and their surface interaction with LiFePO₄ electrode are characterized complementarily using dynamic thermomechanical analysis and scanning electron microscopy. The electrochemical properties of the gel electrolytes based on the as-prepared matrices after being loaded with lithium salt solution are studied systematically on half coin cells. It is found that the ultimate strength of the core-shell PMIA@PVdF-HFP/Al₂O₃ mat can reach 6.70 MPa, 2 times higher than that of the PVdF-HFP/Al₂O₃ nanofiber mat. Meanwhile, the shell PVdF-HFP/Al₂O₃ can ensure manifest surface affinity to the LiFePO₄ electrode and enhance lithium-ion conductance. Thus, the as-assembled LiFePO₄ half coin cells using PMIA@PVdF-HFP/Al₂O₃ gel electrolyte show good electrochemical performances, especially the long cycle stability with the capacity retention of 96.6% after 600 cycles under 1C.

Noncovalent Self-Assembly of Protein Crystals with Tunable Structures

Engineering noncovalent interactions for assembling nonspherical proteins into supramolecular architectures with tunable morphologies and dynamics is challenging due to the structural heterogeneity and complexity of protein surfaces. Herein, we employed an anisotropic building block l-rhamnulose-1-phosphate aldolase (RhuA) to control supramolecular polymorphism in highly ordered protein assemblies by introducing histidine residues. Histidine-based π-π stacking interactions enabled thermodynamically controlled self-organization of RhuA to form three-dimensional (3D) nanoribbons and crystals. Self-assembly of different 3D crystal phases was kinetically modulated by the strong metal ion-histidine chelation, and double-helical protein superstructures were formed by engineering increased histidine interactions at the RhuA binding surface. Their structural properties and dynamics were determined via fluorescence microscopy, transmission electron microscopy, atomic force microscopy, and small-angle X-ray scattering. This work is aimed at expanding the toolbox for the programming of tunable, highly ordered, protein superstructures and increasing the understanding of the mechanisms of protein interfacial interactions.

Surface Reconstruction-Associated Partially Amorphized Bismuth Oxychloride for Boosted Photocatalytic Water Oxidation

The molecule water activation is believed to be one of the most critical steps that is closely related to the proceeding of photoinduced reaction, such as overall water splitting, carbon dioxide conversion, and organic contaminant degradation. As metal oxides possessing a regular structure with high crystallinity are widely accepted as promising for effective catalysis, numerous studies have been devoted to the relevant photoinduced applications. However, their irregular derivative phases with lower crystallinity, which could exhibit tempting opportunities for catalytic activities, have long been ignored. Here, the surface-amorphized bismuth oxychloride is produced by homogeneous nanoparticle distribution through a rapid precipitation strategy. Comparing with its surface-crystallized counterpart, the partially amorphized bismuth oxychloride undergoes a fast surface reconstruction process under light irradiation, forming active surfaces with rich oxygen vacancies (OVs), leading to not only distinctive OV-mediated interfacial charge-transfer mechanisms with improved carrier dynamics but also robust water-surface interface with enhanced physical and chemical interaction, thus resulting in enhanced photocatalytic water oxidation. The strategy of optimizing by tuning the interfacial interaction behavior proposed in this work could broaden horizons for establishing more efficient partially amorphized energy conversion materials.

Surface Roughness of Cu-Bearing Stainless Steel Affects Its Contact-Killing Efficiency by Mediating the Interfacial Interaction with Bacteria

Numerous studies have found that the surface topography affects the material antibacterial properties by reducing the attachment of bacteria on the surfaces without influencing the viability of the adhered cells. For Cu-bearing alloys with excellent contact-killing properties, bacterial adhesion on the surface is also accompanied by short-range interactions which regulate the toxic effects of the material surface against bacterial cells. Thus, the surface topography of Cu-bearing alloys, as an important factor dominating the exposure level of bacteria on the surfaces, should affect the subsequent contact-killing efficiency. In this work, our major focus was on the regulation mechanism of the surface features on the material-bacterial interactions. We correlated the surface properties including different surface roughnesses of Cu-bearing stainless steel (SS) with the bacterial damage pattern and attempted to clarify the role of surface roughness in mediating the contact-killing behavior of Cu-bearing SS. The results of both atomic force microscopy and scanning electron microscopy investigations showed that E. coli cells experienced the most rapid physical and mechanical damages after incubating with the diamond-polished Cu-bearing SS surface. The bacterial cells noticeably stiffened and the adhesion force significantly increased, as evidenced by force-distance curve measurements. Because of the enhanced hydrophobicity and higher surface potential of the diamond-polished surface, which strengthened the Lewis acid-base attractive forces and weakened the electrostatic barrier between the bacteria and the surface, a higher exposure surface for bacteria was generated. Furthermore, the contact-induced charge transfer, manifested by Cu ion burst release, and reactive oxygen species overexpression contribute to an efficient contact-killing process.

Surface atomic arrangement of nanomaterials affects nanotoxicity

Understanding the roles of the properties of nanomaterials in biological interactions is a key issue in their safe applications, but the surface atomic arrangement, as an important property of engineered nanomaterials (ENMs), remains largely unknown. Herein, the interfacial interactions (affinity sites and intensity) between monolayer MoS₂ and zebrafish embryos mediated by 1 T phase surface atomic arrangement (octahedral coordination) and the 2H phase surface atomic arrangement (triangular prism coordination) MoS₂ nanosheets were studied. 1 T-MoS₂ first bound to phosphate and then proteins on the chorion, while the adhesion of 2H-MoS₂ occurred in the opposite order. The binding affinity of 2H-MoS₂ with embryos was higher than that of 1 T-MoS₂, and the former material changed the protein structure from β-sheets to turns and bends and random coils. Compared to 1 T-MoS₂, 2H-MoS₂ more readily entered embryos, which was facilitated by caveolae-mediated endocytosis, and caused higher developmental toxicity. Furthermore, metabolic pathways related to amino acid and protein biosynthesis and energy metabolism were affected by the nanomaterial surface atomic arrangements. The above results provide insights into the designs, applications and risk assessments of nanomaterials by the surface atomic arrangement regulation.

Synthesis of a Series of Dual-Functional Chelated Titanate Bonding Agents and Their Application Performances in Composite Solid Propellants

Titanate-based bonding agents are a class of efficient bonding agents for improving the mechanical properties of composite solid propellants, a kind of special composite material. However, high solid contents often deteriorate the rheological properties of propellant slurry, which limits the application of bonding agents. To solve this problem, a series of long-chain alkyl chelated titanate binders, N-n-octyl-N, N-dihydroxyethyl-lactic acid-titanate (DLT-8), N-n-dodecyl-N, N-dihydroxyethyl-lactic acid-titanate (DLT-12), N-n-hexadecyl-N, N-Dihydroxyethyl-lactic acid-titanate (DLT-16), were designed and synthesized in the present work. The infrared absorption spectral changes of solid propellants caused by binder coating and adhesion degrees of the bonding agents on the oxidant surface were determined by micro-infrared microscopy (MIR) and X-ray photoelectron spectroscopy (XPS), respectively, to characterize the interaction properties of the bonding agents with oxidants, ammonium perchlorate (AP) and hexogen (RDX), in solid propellants. The further application tests suggest that the bonding agents can effectively interact with the oxidants and effectively improve the mechanical and rheological properties of the four-component hydroxyl-terminated polybutadiene (HTPB) composite solid propellants containing AP and RDX. The agent with longer bond chain length can improve the rheological properties of the propellant slurry more significantly, and the propellant of the best mechanical properties was obtained with DLT-12, consistent with the conclusion obtained in the interfacial interaction study. Our work has provided a new method for simultaneously improving the processing performance and rheological properties of propellants and offered an important guidance for the bonding agent design.