Development of highly sensitive dual-enhanced fluorescence quenching immunochromatographic test strips based on Pt nanoprobes

The fluorescence-quenching method is crucial in vitro analysis, particularly for immunochromatographic test strips (ICTs) using noble metal nanoparticles as probes. However, ICTs still fall short in meeting the requirements for the detection of traces biomarkers due to the noble metal nanoparticles can only quench fluorescence of the dyes within a confined distance. Interestingly, noble metal nanoparticles, such as Pt NPs cannot only perform fluorescence-quenching ability based on the Förster resonance energy transfer (FRET), but also show perfect oxidase-like catalytic performance on many kinds of substrates, such as 3,3',5,5' -tetramethylbenzidine (TMB). We observed that the oxTMB (the oxidation products of TMB) exhibited notable effectiveness in quenching Cy5 fluorescence by the strong inner filter effect (IFE), which obviously improved the fluorescence-quenching efficiency with extremely low background signal. Through the dual-enhanced fluorescence quenching mechanism, the fluorescence quenching constant (Kn) was 661.24-fold that of only Pt NPs on the NC membrane. To validate the feasibility of this technique, we employed two types of biomarkers, namely microRNA (miR-15a-5p) and the signature protein (PSA). The sensitivity of miR-15a-5p was 9.286 × 10-18 mol/L and 17.5-fold more than that based on Pt NPs. As for the PSA, the LOD (0.6265 pg/mL) was 15.5-fold enhancement more sensitive after catalysis. Overall, the dual-enhanced fluorescence quenching rFICTs could act as a practical detection for biomarker in real samples.

Electron deficient Bi3+δ serves as N2 absorption sites and inhibits carriers recombination to enhance N2 photo-fixation in BiOBr/TiO2 S-scheme heterojunction

Efficient carriers separation and multiple nitrogen (N2) activation sites are essential for N2 photo-fixation. Here, we found that the BiOBr/TiO2 (BBTO) displayed an attractive reversible photochromism (white → grey) due to the generation of electron deficient Bi3+δ, which was produced by the hole trapping of Bi3+ under light irradiation. Interestingly, more Bi3+δ were detected in the BBTO heterojunction than in pure BiOBr, attributing that the hole trapping was promoted by the built-in electric field in the Step scheme (S-scheme) heterojunction. In the BBTO, the electron deficient Bi3+δ enhanced carriers separation and served as the reactive active site to adsorb more N2. Consequently, the BBTO possessed an excellent N2 photo-fixation activity (191 μmol gcat-1 h-1), which was 7.7 and 18 times higher than that of pure BiOBr (24.8 μmol gcat-1 h-1) and TiO2 (10.6 μmol gcat-1 h-1), respectively. Therefore, this work provides a new perspective for enhancing N2 photo-fixation by the electron deficient photocatalysts with S-scheme heterojunction.

Application of deep learning in radiation therapy for cancer

In recent years, with the development of artificial intelligence, deep learning has been gradually applied to clinical treatment and research. It has also found its way into the applications in radiotherapy, a crucial method for cancer treatment. This study summarizes the commonly used and latest deep learning algorithms (including transformer, and diffusion models), introduces the workflow of different radiotherapy, and illustrates the application of different algorithms in different radiotherapy modules, as well as the defects and challenges of deep learning in the field of radiotherapy, so as to provide some help for the development of automatic radiotherapy for cancer.

Abdominal wall mass resections: single-center closure practices and outcomes following oncologic resections of abdominal wall fascia

PURPOSE

Radical resections for abdominal wall tumors are rare, thus yielding limited data on reconstruction of defects. We describe surgical management and long-term outcomes following radical tumor resection.

METHODS

This was a single-center retrospective review of patients between January 2010 and December 2022. Variables included operative characteristics, wound complications, hernia development, tumor recurrence, and reoperation. A multivariable analysis compared wound morbidity for suture and mesh repairs while adjusting for defect width, fascial closure, and CDC wound class.

RESULTS

120 patients were identified. Mean follow-up was 3.9 ± 3.4 years. Seventy-five (62.5%) of the masses were primary; most commonly desmoid (n = 25) and endometrioma (n = 27). Forty-five masses were metastases. Mean tumor width was 6.2 ± 3.4 cm; mean defect width was 8.1 ± 4.1 cm. Sixty-one patients (50.8%) had mesh placed, with variation in technique. Postoperative CT scans were available for 88 (73.3%) patients. Forty SSOs (33.3%), 11 SSIs (9.2%), and 18 (15%) SSOPIs occurred within 30 days. On multivariable analysis, increased defect width was associated with SSOPI (OR 1.17, p = 0.041) and CDC wound class II-III was associated with SSI (OR 8.38 and 49.1, p < 0.05) and SSOPI (OR 5.77 and 17.4, p < 0.05); mesh was not associated with these outcomes. Seven patients (5.8%) underwent 30-day reoperations and 35 (20.8%) required additional operations after 30 days. Thirteen percent developed abdominal wall (n = 8) or intra-abdominal tumor recurrence (n = 8) requiring reoperation. Twenty-seven (22.5%) patients developed hernias with a mean fascial defect width of 9.8 ± 7.2 cm.

CONCLUSION

Abdominal wall mass resections are morbid, often contaminated cases with high postoperative complication rates. Risks and benefits of mesh implantation should be tailored on an individual basis.

Measurements of All-Particle Energy Spectrum and Mean Logarithmic Mass of Cosmic Rays from 0.3 to 30 PeV with LHAASO-KM2A

We present the measurements of all-particle energy spectrum and mean logarithmic mass of cosmic rays in the energy range of 0.3-30 PeV using data collected from LHAASO-KM2A between September 2021 and December 2022, which is based on a nearly composition-independent energy reconstruction method, achieving unprecedented accuracy. Our analysis reveals the position of the knee at 3.67±0.05±0.15  PeV. Below the knee, the spectral index is found to be -2.7413±0.0004±0.0050, while above the knee, it is -3.128±0.005±0.027, with the sharpness of the transition measured with a statistical error of 2%. The mean logarithmic mass of cosmic rays is almost heavier than helium in the whole measured energy range. It decreases from 1.7 at 0.3 PeV to 1.3 at 3 PeV, representing a 24% decline following a power law with an index of -0.1200±0.0003±0.0341. This is equivalent to an increase in abundance of light components. Above the knee, the mean logarithmic mass exhibits a power law trend towards heavier components, which is reversal to the behavior observed in the all-particle energy spectrum. Additionally, the knee position and the change in power-law index are approximately the same. These findings suggest that the knee observed in the all-particle spectrum corresponds to the knee of the light component, rather than the medium-heavy components.

In Situ Self-Assembled Phytopolyphenol-Coordinated Intelligent Nanotherapeutics for Multipronged Management of Ferroptosis-Driven Alzheimer's Disease

Ferroptosis is a vital driver of pathophysiological consequences of Alzheimer's disease (AD). High-efficiency pharmacological inhibition of ferroptosis requires comprehensive coordination of diverse abnormal intracellular events, which is an urgent problem and great challenge for its application in AD treatment. Herein, a triphenylphosphonium-modified quercetin-derived smart nanomedicine (TQCN) is developed for multipronged anti-ferroptosis therapy in AD. Taking advantage of the favorable brain-targeting and mitochondria-locating properties, TQCN can efficiently chelate iron through phytopolyphenol-mediated spontaneous coordination and self-assemble into metal-phenolic nanocomplexes in situ, exerting escalating exogenous offensive effects to attenuate iron overload and its induced free radical burst. Meanwhile, the Nrf2 signaling-mediated endogenous defensive system is reconstituted to restore iron metabolism homeostasis represented by iron export and storage and enhance cytoprotective antioxidant cascades represented by lipid peroxidation detoxification. Benefiting from the multifaceted regulation of pathogenic processes triggering ferroptosis, TQCN treatment can ameliorate various neurodegenerative manifestations associated with brain iron deposition and rescue severe cognitive decline in AD mice. This work displays great promise of in situ self-assembled phytopolyphenol-coordinated intelligent nanotherapeutics as advanced candidates against ferroptosis-driven AD progression.

Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment

On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G_{target} of 1.5. This is the first laboratory demonstration of exceeding "scientific breakeven" (or G_{target}>1) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129, 075001 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.075001]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result.

Hollow Bowl NiS2 @polyaniline Conductive Linker/Graphene Conductive Network: A Triple Composite for High-Performance Supercapacitor Applications

The achievement of the outstanding theoretical capacitance of nickel sulfide (NiS2 ) is challenging due to its low conductivity, slow electrochemical kinetics, and poor structural stability. In this study, we utilize polyaniline (PANI) as a linker to anchor the NiS2 with a hollow bowl-like structure, uniformly dispersed at the surface of graphene oxide (GO)(NiS2 @15PG). The presence of PANI provides growth sites, resulting in a uniform and dense arrangement of NiS2 . This morphological modulation of NiS2 increases the contact area between the active material to electrolyte. Additionally, PANI effectively connects NiS2 with the conductive network of GO, which advances the electrical conductivity and ion diffusion properties. As a result, the Rct (charge transfer resistance) and Zw (Warburg impedance) of NiS2 @15PG decrease by 82.61 % and 66.76 % respectively. This unique structure confers NiS2 @15PG with high specific capacitance (536.13 C g-1 at 1 A g-1 ) and excellent multiplicative property of 60.93 % at 20 A g-1 . The assembled NiS2 @15PG//YP-50 supercapacitors (HSC) demonstrates an energy density (13.09 Wh kg-1 ) at a high-power density (16 kW kg-1 ). The capacity retention after 10,000 cycles at 5 A g-1 is 86.59 %, indicating its significant potential for practical applications.

MicroRNA‑203a‑3p improves bleomycin and pingyangmycin sensitivity by inactivating the PI3K/AKT pathway in hemangioma

MicroRNAs (miRs) have been found to play a fundamental role in the pathology and progression of hemangioma. Of note, miR-203a-3p prevents hemangioma progression via inactivation of the PI3K/AKT pathway. Bleomycin and pingyangmycin are drugs used in sclerotherapy, but certain hemangioma patients experience drug resistance, leading to poor clinical outcomes. The present study aimed to explore the impact of miR-203a-3p on bleomycin and pingyangmycin sensitivity in hemangioma, as well as the involvement of the PI3K/AKT pathway. miR-203a-3p or negative control mimics were transfected into human hemangioma endothelial cells, which were treated with 0-20 µM bleomycin or pingyangmycin. Subsequently, 740 Y-P, a PI3K/AKT pathway agonist, was added. Cell viability, rate of apoptosis and the expression levels of proteins involved in the PI3K/AKT pathway, including phosphorylated (p)-PI3K, PI3K, p-AKT and AKT, were detected. miR-203a-3p overexpression significantly decreased the half-maximal inhibitory concentration (IC50) values of bleomycin (5.84±0.87 vs. 14.23±2.17 µM; P<0.01) and pingyangmycin (5.13±0.55 vs. 12.04±1.86 µM; P<0.01), compared with untreated cells. In addition, under bleomycin or pingyangmycin treatment, miR-203a-3p overexpression significantly reduced the proportion of EdU positive cells (both P<0.05) and B-cell leukemia/lymphoma-2 (BCL2) protein expression levels (both P<0.05), whilst increasing cell apoptosis rate (both P<0.05) and cleaved caspase 3 protein expression levels (both P<0.05) compared with untreated controls. Furthermore, miR-203a-3p overexpression significantly inhibited the phosphorylation of PI3K and AKT (both P<0.05), an effect that was significantly diminished by 740 Y-P treatment (both P<0.01). In addition, 740 Y-P significantly increased IC50 values of bleomycin (P<0.01) and pingyangmycin (P<0.001) and also significantly increased the proportion of EdU-positive cells and BCL2 protein expression levels, while decreasing the apoptosis rate and cleaved caspase 3 protein expression levels in cells treated with bleomycin or pingyangmycin (all P<0.05). Of note, 740 Y-P weakened the effect of miR-203a-3p overexpression on the aforementioned cellular characteristics. The present study demonstrated that miR-203a-3p improved the sensitivity of cells to bleomycin and pingyangmycin treatment by inhibiting PI3K/AKT signaling in hemangioma.

Enhanced photocarrier separation in Br substitution-induced [W(VI)O6-x] units for highly efficient photocatalytic nitrate reduction under alkaline conditions

Photocatalytic nitrate (NO3-) reduction is considered a promising green and non-polluting technology to solve the nitrate pollution of groundwater and surface water. Herein, a novel Br-substituted Bi2WO6-x ultrathin nanosheets were prepared by a simple hydrothermal method in a strong acid environment containing sixteen alkyl three methyl bromide (CTAB). The catalytic system solves the problems of low carrier separation efficiency, poor performance under alkaline conditions, and a hard-to-activate N = O bond, achieving efficient NO3- removal under alkaline conditions along with high N2 selectivity. It was confirmed that Br-substituted Bi2WO6-x produced the [W(VI)O6-x] units with a strong electron-withdrawing property by changing the polarity of the O-W-O bond. As a result, the effective space charge separation caused by the change of the W valence state and the spontaneous fracture behavior of the N = O bond improved the carriers utilization efficiency and distinctly reduced the reaction energy consumption, synergistically achieving excellent performance.

Spin coating epitaxial heterodimensional tin perovskites for light-emitting diodes

Environmentally friendly tin (Sn) perovskites have received considerable attention due to their great potential for replacing their toxic lead counterparts in applications of photovoltaics and light-emitting diodes (LEDs). However, the device performance of Sn perovskites lags far behind that of lead perovskites, and the highest reported external quantum efficiencies of near-infrared Sn perovskite LEDs are below 10%. The poor performance stems mainly from the numerous defects within Sn perovskite crystallites and grain boundaries, leading to serious non-radiative recombination. Various epitaxy methods have been introduced to obtain high-quality perovskites, although their sophisticated processes limit the scalable fabrication of functional devices. Here we demonstrate that epitaxial heterodimensional Sn perovskite films can be fabricated using a spin-coating process, and efficient LEDs with an external quantum efficiency of 11.6% can be achieved based on these films. The film is composed of a two-dimensional perovskite layer and a three-dimensional perovskite layer, which is highly ordered and has a well-defined interface with minimal interfacial areas between the different dimensional perovskites. This unique nanostructure is formed through direct spin coating of the perovskite precursor solution with tryptophan and SnF2 additives onto indium tin oxide glass. We believe that our approach will provide new opportunities for further developing high-performance optoelectronic devices based on heterodimensional perovskites.

Analyzing 20 years of Resting-State fMRI Research: Trends and collaborative networks revealed

Resting-state functional magnetic resonance imaging (rs-fMRI), initially proposed by Biswal et al. in 1995, has emerged as a pivotal facet of neuroimaging research. Its ability to examine brain activity during the resting state without the need for explicit tasks or stimuli has made it an integral component of brain imaging studies. In recent years, rs-fMRI has witnessed substantial growth and found widespread application in the investigation of functional connectivity within the brain. To delineate the developmental trajectory of rs-fMRI over the past two decades, we conducted a comprehensive analysis using bibliometric tool Citespace. Our analysis encompassed publication trends, authorship networks, institutional affiliations, international collaborations, as well as emergent themes in references and keywords. Our study reveals a remarkable increase in the volume of rs-fMRI publications over the past two decades, underscoring the burgeoning interest and potential within this field. Harvard University stands out as the institution with the highest number of research papers published in the realm of RS-fMRI, while the United States holds the highest overall influence in this domain. The recent emergence of keywords such as "machine learning" and "default mode," coupled with citation surges in reference to rs-fMRI, have paved new avenues for research within this field. Our study underscores the critical importance of integrating machine learning techniques into rs-fMRI investigations, offering valuable insights into brain function and disease diagnosis. These findings hold profound significance for the field of neuroscience and may furnish insights for future research employing rs-fMRI as a diagnostic tool for a wide array of neurological disorders, thus emphasizing its pivotal role and potential as a tool for investigating brain functionality.

Multi-peak Light-emitting Diode Curing Units and Polymerization of 3D-printed Crown and Bridge Resin

PURPOSE

This study aimed to evaluate the substitutive and additive efficacy of multi-peak light-emitting diode (LED) curing units for post-curing of a three-dimensional- (3D-) printed crown and bridge resin.

METHODS

A total of 792 disc- and 180 bar-shaped specimens were printed with a crown and bridge resin (NextDent C&B MFH) and post-cured using two LED curing units (VALO Cordless and Bluephase N G4) in fast and standard modes. Conventional post-curing (LC-3D Print Box, Group PC) was compared with LED-only curing (Groups V1, V2, B1, and B2) and LED-combined curing (Groups PV1, PV2, PB1, and PB2) in terms of microhardness, flexural strength, degree of conversion (DC), and CIE L*a*b* color and translucency parameters. Cytotoxicity of the resin eluates was evaluated using the WST-1 assay. Temperature increases on the resin surface were measured with infrared thermography. Data were statistically analyzed using ANOVA and Kruskal-Wallis tests (α=0.05).

RESULTS

The microhardness and flexural strength in Groups V1, V2, B1, and DC in all LED-only groups were lower than in other groups (p<0.05). Larger color disparities existed between Group PC and all LED-only groups than between Group PC and the others (p<0.05). There was no significant difference in cytotoxicity among the groups. The temperature increase was lowest in Groups V1 and PV1 during light curing (p<0.05).

CONCLUSIONS

Post-curing by multi-peak LED curing units was not as effective as the conventional post-curing device. Additional post-curing by LED curing units did not improve the material properties.

Multifunctional nanoparticles for enhanced sonodynamic-chemodynamic immunotherapy with glutathione depletion

Aim: This study aimed to develop a sonodynamic-chemodynamic nanoparticle functioning on glutathione depletion in tumor immunotherapy. Materials & methods: The liposome-encapsulated 2,2-azobis[2-(2-imidazolin-2-yl) propane] dihydrochloride (AIPH) and copper-cysteine nanoparticles, AIPH/Cu-Cys@Lipo, were synthesized with a one-pot method. 4T1 cells were injected into female BALB/c mice for modeling. Results: AIPH/Cu-Cys@Lipo was well synthesized. It generated alkyl radicals upon ultrasound stimulation. AIPH/Cu-Cys@Lipo promoted the generation of -OH via a Fenton-like reaction. Both in vitro and in vivo experiments verified that AIPH/Cu-Cys@Lipo significantly inhibited tumor development by decreasing mitochondrial membrane potential, activating CD4+ and CD8+ T cells and promoting the expression of IL-2 and TNF-α. Conclusion: AIPH/Cu-Cys@Lipo provides high-quality strategies for safe and effective tumor immunotherapy.

Shale Matrix Petrophysical Evolution due to Spontaneous Water Imbibition

Shale matrix alteration resulting from fracturing water-rock interactions has become a major concern. It significantly affects economic production from shale gas formation. Previous studies mostly failed to investigate the thickness of the water intrusion zone and quantified its effects on shale geophysical alteration. As a result, we present a one-dimensional countercurrent water imbibition model in which capillary pressure and chemical osmosis stress are included. This model is used to predict water front movement with respect to soaking durations. Based on the simulation results and theory derivations, the matrix porosity-permeability and mechanical alteration models are set up to reveal shale geophysical variables change due to shale-water interactions. Our results show that during the water imbibition process, capillary pressure plays a more crucial role than osmosis pressure. Furthermore, both core-scaled porosity and permeability are negatively associated with water saturation, the extent of which depends on different driving forces and penetration depth. Finally, water soaking is quantitatively demonstrated to induce an increase in compressive strength and stress sensitivity but a reduction in the elastic modulus. These findings will provide efficient insights into driving mechanisms involved in the water-rock interactions. The study is useful to be incorporated into production models for predicting hydrocarbon production from shale reservoirs.

2D/2D MgO/g-C3N4 S-scheme heterogeneous tight with Mg-N bonds for efficient photo-Fenton degradation: Enhancing both oxygen vacancy and charge migration

Construction of S-scheme heterojunction is an efficient strategy to enhance photocatalytic efficiency. Besides the retained redox ability, the wide work function gap and intimate interface contact are essential for efficient degradation. Nontoxic magnesium oxide (MgO) with two dimensional (2D) structures and high work function is a potential material for S-scheme photocatalysts. Herein, MgO was used to in-situ grown on graphitic carbon nitride (g-C3N4) for constructing the strongly connected MgO/g-C3N4 S-scheme photocatalyst with tight Mg-N bonds. Meanwhile, the presence of Mg-N bonds induces the formation of oxygen vacancy in MgO, which enhances the Fenton-like degradation. Furthermore, the Mg-N bond promotes the charge migration between MgO and g-C3N4. Consisting of the enhanced Fenton-like process and photocatalysis, the MgO/g-C3N4 shows a higher photo-Fenton degradation activity (80.01%) for degradation of organic pollutants (Rhodamine B, 100 mg L-1) in water, than g-C3N4 (28.46%) and MgO (55.64%). Therefore, the interfacial chemical bonds in heterojunction photocatalysts provide an efficient strategy for further enhancing the photocatalysis of S-scheme photocatalysts.

Pseudolaric acid B triggers ferritinophagy and ferroptosis via upregulating NCOA4 in lung adenocarcinoma cells

BACKGROUND

Ferroptosis is a novel subtype of programmed cell death caused by iron-dependent lipid peroxidation and excessive reactive oxygen species (ROS) production. Small-molecule ferroptotic drugs have the probability of selectively targeting the specific features of aggressive tumor cells. In particular, pseudolaric acid B (PAB) triggered ferroptosisin breast cancer cells. The aim of this study is to explore the antitumor effect of PAB on A549 cells and provide a theoretical basis for the further development and clinical application of PAB.

METHODS

First, relevant databases were used to predict of target genes related to PAB, Then, EdU proliferation assay, colony formation and wound-healing assays were applied to calculate A549 cells proliferative abilities. Measurement of ferrous iron, lipid peroxidation, ROS, malondialdehyde (MDA) and glutathione (GSH) were utilized to explore the relevant mechanism.

RESULTS

We showed that PAB decreased the viability of lung adenocarcinoma cells in vitro, which was accompanied by abnormally elevated levels of intracellular ferrous iron and overproduction of lipid reactive oxidate species (L-ROS). In turn, deferoxamine (DFO) significantly rescued PAB-induced lipid peroxidation. PAB also improved the intracellular labile iron pool by promoting ferritin autophagy via the upregulation of the nuclear receptor coactivator 4 (NCOA4). Moreover, silencing of NCOA4 alleviated PAB-inducedferroptotic death and reduced the levels of intracellular ferrous iron.

CONCLUSIONS

In summary, PAB-triggered ferroptosis in lung adenocarcinoma cells by enhancing ferritinophagy. thus, PAB is a potential therapeutic agent for lung adenocarcinoma.

Leveraging a disulfidptosis/ferroptosis-based signature to predict the prognosis of lung adenocarcinoma

BACKGROUND

Disulfidptosis and Ferroptosis are two novel forms of cell death. Although their mechanisms differ, research has shown that there is a relationship between the two. Investigating the connection between these two forms of cell death can further deepen our understanding of the development and progression of cancer, and provide better prediction models for accurate prognosis.

METHODS

In this study, RNA sequencing (RNA-seq) data, clinical data, single nucleotide polymorphism (SNP) data, and single-cell sequencing data were obtained from public databases. We used weighted gene co-expression network analysis (WGCNA) and unsupervised clustering to identify new Disulfidptosis/Ferroptosis-Related Genes (DFRG), and constructed a LASSO COX prognosis model that was externally validated. To further explore this novel signature, pathway and function analysis was performed, and differences in gene mutation frequency between high- and low-risk groups were studied. Importantly, we also conducted research on immune checkpoint, immune cell infiltration levels and immune resistance indicators, in addition to analyzing real clinical immunotherapy data.

RESULTS

We have identified four optimal disulfidptosis/ferroptosis-related genes (ODFRGs) that are differentially expressed and associated with the prognosis of Lung Adenocarcinoma (LUAD). These genes include GMPR, MCFD2, MRPL13, and SALL2. Based on these ODFRGs, we constructed a robust prognostic model in this study, and the high-risk group showed significantly lower overall survival (OS) compared to the low-risk group. Furthermore, this model can also predict the immunotherapy outcomes of LUAD patients to some extent.

A Photo-Activated Continuous Reactive Oxygen Species Nanoamplifier for Dual-Dynamic Cascade Cancer Therapy

The special redox homeostasis of tumor cells makes reactive oxygen species (ROS)-based approaches a promising cancer therapeutic strategy. Among these approaches, photodynamic therapy is the most widely studied ROS-based treatment due to its ability to achieve targeted therapy by local light irradiation. However, achieving efficient and continuous ROS generation without prolonged laser exposure is still challenging. In this work, a photo-activated continuous ROS nanoamplifier is proposed for photodynamic-chemodynamic cascade therapy. Upon local laser irradiation, the nanoamplifier can continuously amplify cellular oxidative stress through a positive feedback loop of "light-triggered ROS generation, ROS-responsive prodrug activation, and Fenton reaction-mediated ROS cyclic regenerative amplification", avoiding tissue damage caused by excessive laser exposure. This strategy provides a potential pathway to overcome the limitations of ROS-based therapeutic approaches.

Inhibition of nitrous oxide reduction in forest soil microcosms by different forms of methanobactin

Copper plays a critical role in controlling greenhouse gas emissions as it is a key component of the particulate methane monooxygenase and nitrous oxide reductase. Some methanotrophs excrete methanobactin (MB) that has an extremely high copper affinity. As a result, MB may limit the ability of other microbes to gather copper, thereby decreasing their activity as well as impacting microbial community composition. Here, we show using forest soil microcosms that multiple forms of MB; MB from Methylosinus trichosporium OB3b (MB-OB3b) and MB from Methylocystis sp. strain SB2 (MB-SB2) increased nitrous oxide (N2 O) production as well caused significant shifts in microbial community composition. Such effects, however, were mediated by the amount of copper in the soils, with low-copper soil microcosms showing the strongest response to MB. Furthermore, MB-SB2 had a stronger effect, likely due to its higher affinity for copper. The presence of either form of MB also inhibited nitrite reduction and generally increased the presence of genes encoding for the iron-containing nitrite reductase (nirS) over the copper-dependent nitrite reductase (nirK). These data indicate the methanotrophic-mediated production of MB can significantly impact multiple steps of denitrification, as well as have broad effects on microbial community composition of forest soils.

Minimally invasive colectomies can be performed with similar outcomes to open counterparts for colorectal cancer emergencies: a propensity score matching analysis utilizing ACS-NSQIP

PURPOSE

The safety and feasibility of minimally invasive surgery (MIS) in the setting of colorectal cancer emergencies have been debated. We sought to compare postoperative outcomes of MIS with open techniques in the setting of colorectal cancer emergencies from the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database.

METHODS

We included patients undergoing colectomy for colorectal cancer emergency between 2012 and 2019 "2012-2019" from the ACS-NSQIP dataset. We compared short-term morbidity, mortality, short-term oncological outcomes, and secondary outcomes for MIS vs open colectomies using propensity score matching. We then evaluated the trends of MIS versus open colectomies using linear regression analysis.

RESULTS

We examined a total of 5544 patients (open n = 4070; MIS n = 1474) and included 1352 patients for our postoperative outcome analyses after propensity score matching 1:1 (open n = 676; MIS n = 676). Within the matched cohort, mortality was significantly higher in the open group (open 6.95% vs MIS 3.99%, OR 1.8, p = 0.023). Anastomotic leak rates were comparable between the  two groups (open 4.46% vs MIS 4.02%, OR 1.12, p = 0.787). Pulmonary complications were significantly higher after open surgery (open 10.06% vs MIS 4.73%, OR 2.25, p < 0.001). Rates of ileus were significantly higher amongst open patients (open 29.08% vs MIS 19.94%, p < 0.001). Patients stayed on average 1 day longer in the hospital after open surgery (p < 0.001). Rates of MIS for early tumors (N0 and T1/T2, n = 289) did not significantly change over 7 years (p = 0.597, rate = - 0.065%/year); however, utilization of MIS for late tumors (N1 or T3/T4, n = 4359) increased by 2.06% per year (p < 0.001).

CONCLUSIONS

This study demonstrates that MIS was associated with superior postoperative outcomes compared to open surgery without compromising oncological outcomes in patients undergoing emergency colectomy for colon cancer. Within the matched cohort, MIS was associated with lower rates of mortality, pulmonary complications, ileus, and shorter postoperative length of stay.

Rheology Engineering for Dry-Spinning Robust N-Doped MXene Sediment Fibers toward Efficient Charge Storage

MXene nanosheets are believed to be an ideal candidate for fabricating fiber supercapacitors (FSCs) due to their metallic conductivity and superior volumetric capacitance, while challenges remain in continuously collecting bare MXene fibers (MFs) via the commonly used wet-spinning technique due to the intercalation of water molecules and a weak interaction between Ti3 C2 TX nanosheets in aqueous coagulation bath that ultimately leads to a loosely packed structure. To address this issue, for the first time, a dry-spinning strategy is proposed by engineering the rheological behavior of Ti3 C2 TX sediment and extruding the highly viscose stock directly through a spinneret followed by a solvent evaperation induced solidification. The dry-spun Ti3 C2 TX fibers show an optimal conductivity of 2295 S cm-1 , a tensile strength of 64 MPa and a specific capacitance of 948 F cm-3 . Nitrogen (N) doping further improves the capacitance of MFs to 1302 F cm-3 without compromising their mechanical and electrical properties. Moreover, the FSC based on N-doped MFs exhibits a high volumetric capacitance of 293 F cm-3 , good stability over 10 000 cycles, excellent flexibility upon bending-unbending, superior energy/power densities and anti-self-discharging property. The excellent electrochemical and mechanical properties endow the dry-spun MFs great potential for future applications in wearable electronics.

High-Quality Amorphous Silicon Carbide for Hybrid Photonic Integration Deposited at a Low Temperature

Integrated photonic platforms have proliferated in recent years, each demonstrating its unique strengths and shortcomings. Given the processing incompatibilities of different platforms, a formidable challenge in the field of integrated photonics still remains for combining the strengths of different optical materials in one hybrid integrated platform. Silicon carbide is a material of great interest because of its high refractive index, strong second- and third-order nonlinearities, and broad transparency window in the visible and near-infrared range. However, integrating silicon carbide (SiC) has been difficult, and current approaches rely on transfer bonding techniques that are time-consuming, expensive, and lacking precision in layer thickness. Here, we demonstrate high-index amorphous silicon carbide (a-SiC) films deposited at 150 °C and verify the high performance of the platform by fabricating standard photonic waveguides and ring resonators. The intrinsic quality factors of single-mode ring resonators were in the range of Qint = (4.7-5.7) × 105 corresponding to optical losses between 0.78 and 1.06 dB/cm. We then demonstrate the potential of this platform for future heterogeneous integration with ultralow-loss thin SiN and LiNbO3 platforms.

Whole-genome sequencing analysis in fetal structural anomalies: novel phenotype-genotype discoveries

OBJECTIVES

The identification of structural variants and single-nucleotide variants is essential in finding molecular etiologies of monogenic genetic disorders. Whole-genome sequencing (WGS) is becoming more widespread in genetic disease diagnosis. However, data on its clinical utility remain limited in prenatal practice. We aimed to expand our understanding of implementing WGS in the genetic diagnosis of fetal structural anomalies.

METHODS

We employed trio WGS with a minimum coverage of 40× on the MGI DNBSEQ-T7 platform in a cohort of 17 fetuses presenting with aberrations detected by ultrasound, but uninformative findings of standard chromosomal microarray analysis (CMA) and exome sequencing (ES).

RESULTS

Causative genetic variants were identified in two families, with an increased diagnostic yield of 11.8% (2/17). Both were exon-level copy-number variants of small size (3.03 kb and 5.16 kb) and beyond the detection thresholds of CMA and ES. Moreover, to the best of our knowledge, we have described the first prenatal instance of the association of FGF8 with holoprosencephaly and facial deformities.

CONCLUSIONS

Our analysis demonstrates the clinical value of WGS in the diagnosis of the underlying etiology of fetuses with structural abnormalities, where routine genetic tests have failed to diagnose. Additionally, the novel variants and new fetal manifestations have expanded the mutational and phenotypic spectrums of BBS9 and FGF8. © 2023 International Society of Ultrasound in Obstetrics and Gynecology.

Measurement of Ultra-High-Energy Diffuse Gamma-Ray Emission of the Galactic Plane from 10 TeV to 1 PeV with LHAASO-KM2A

The diffuse Galactic γ-ray emission, mainly produced via interactions between cosmic rays and the interstellar medium and/or radiation field, is a very important probe of the distribution, propagation, and interaction of cosmic rays in the Milky Way. In this Letter, we report the measurements of diffuse γ rays from the Galactic plane between 10 TeV and 1 PeV energies, with the square kilometer array of the Large High Altitude Air Shower Observatory (LHAASO). Diffuse emissions from the inner (15°10  TeV). The energy spectrum in the inner Galaxy regions can be described by a power-law function with an index of -2.99±0.04, which is different from the curved spectrum as expected from hadronic interactions between locally measured cosmic rays and the line-of-sight integrated gas content. Furthermore, the measured flux is higher by a factor of ∼3 than the prediction. A similar spectrum with an index of -2.99±0.07 is found in the outer Galaxy region, and the absolute flux for 10≲E≲60  TeV is again higher than the prediction for hadronic cosmic ray interactions. The latitude distributions of the diffuse emission are consistent with the gas distribution, while the longitude distributions show clear deviation from the gas distribution. The LHAASO measurements imply that either additional emission sources exist or cosmic ray intensities have spatial variations.

Advances in the application of wearable sensors for gait analysis after total knee arthroplasty: a systematic review

BACKGROUND

Wearable sensors have become a complementary means for evaluation of body function and gait in lower limb osteoarthritis. This study aimed to review the applications of wearable sensors for gait analysis after total knee arthroplasty (TKA).

METHODS

Five databases, including Web of Science Core Collection, Embase, Cochrane, Medline, and PubMed, were searched for articles published between January 2010 and March 2023, using predetermined search terms that focused on wearable sensors, TKA, and gait analysis as broad areas of interest.

RESULTS

A total of 25 articles were identified, involving 823 TKA patients. Methodologies varied widely across the articles, with inconsistencies found in reported patient characteristics, sensor data and experimental protocols. Patient-reported outcome measures (PROMs) and gait variables showed various recovery times from 1 week postoperatively to 5 years postoperatively. Gait analysis using wearable sensors and PROMs showed differences in controlled environments, daily life, and when comparing different surgeries.

CONCLUSION

Wearable sensors offered the potential to remotely monitor the gait function post-TKA in both controlled environments and patients' daily life, and covered more aspects than PROMs. More cohort longitudinal studies are warranted to further confirm the benefits of this remote technology in clinical practice.

Proton Single-Energy Bragg-Peak FLASH Using Clinical Systems Can Achieve IMPT-Equivalent Plan Quality for Breast and Prostate Cancers

PURPOSE/OBJECTIVE(S)

Most current proton FLASH-RT studies focus on transmission proton techniques. In this study, we propose a novel method for achieving FLASH dose rate in hypofractionated proton radiotherapy using the Bragg peak of a single-energy proton beam. The dosimetric characteristics using this novel technique for proton pencil beam scanning (PBS) stereotactic body radiation therapy (SBRT) of prostate and breast cancers were first investigated based on the clinically available cyclotron beam parameters.

MATERIALS/METHODS

This novel approach uses the distal tracking technique that enables PBS Bragg-peak of the highest proton energy to adapt to the target distally. Positioning of the Bragg peak at different depths is achieved using a universal range shifter and range compensator. To investigate the feasibility of this approach, we developed an in-house treatment planning platform for intensity-modulated proton therapy (IMPT) delivery and performed dosimetric studies on prostate and breast SBRT cases previously treated with conventional proton PBS technique. FLASH plans were generated using a similar clinical beam arrangement to deliver 40 Gy (RBE) in 5 fractions. Dose metrics were compared between the clinical and FLASH plans. Dose-rate volume histograms (DRVH) were also calculated to investigate the 40 Gy/s coverage (V40 Gy/s) of organs-at-risk (OARs) for FLASH plans.

RESULTS

The distal tracking can precisely stop the Bragg peak at the target distal edge, and Bragg peak plans achieved tumor coverage and dose conformality equivalent to IMPT plans. The clinical IMPT plans yielded slightly superior target dose uniformity -CTV Dmax of FLASH plans was 10% higher for prostate and 2% higher for breast. There was no significant difference between the clinical and FLASH plans in dose metrics for major OARs, including rectum, large bowel, heart, and lung. Higher maximal doses to femoral heads (∼2 Gy) and urethra (∼6 Gy) were observed in prostate FLASH plans than in the clinical plans but were still within clinically accepted dose limits. The V40 Gy/s for OARs were >90% for prostate FLASH plans and >76.5% for breast FLASH plans.

CONCLUSION

The proposed single-energy Bragg-peak FLASH technique eliminates exit dose associated with transmission proton FLASH and can still yield comparable plan quality and OAR sparing while preserve sufficient FLASH dose rate coverage for prostate and breast proton SBRT. This study demonstrates the potential application of Bragg peaks for highly conformal FLASH-RT using clinical cyclotron systems to treat prostate and breast cancer patients, which moves towards clinical application.

Phase II Study of Hemithoracic Intensity-Modulated Pleural Radiation Therapy (IMPRINT) for Patients with Pleural Metastases from Thymic Malignancies

PURPOSE/OBJECTIVE(S)

Pleural metastases are common sites for recurrence and progression in patients with thymic malignancies. The management of pleural metastases typically involves surgical resection with or without neoadjuvant or adjuvant systemic therapy. After surgical resection of pleural metastases, the 5-year progression-free survival (PFS) rate is about 29-45%. While radiation therapy (RT) is standardly used in the management of locally-advanced thymic malignancies, the role of RT in patients with pleural metastases in unclear. Intensity-modulated pleural radiation therapy (IMPRINT) is a RT technique currently being used to treat malignant pleural mesothelioma (MPM) patients with 2 intact lungs at centers that specialize in MPM treatment. This IMPRINT technique can potentially be extrapolated to thymic patients with pleural metastases. Because the risk of toxicity is of greater concern for thymic patients given their overall relatively favorable prognosis, the rate of toxicity, particularly radiation pneumonitis, needs to be established in the thymic patient population.

MATERIALS/METHODS

This is a single-arm, single institution Phase II study of hemithoracic IMPRINT for patients with pleural metastases from thymic malignancies. The primary endpoint of this study is grade 3 or higher radiation pneumonitis within 4 months of completing RT. Secondary endpoints include any toxicity, progression-free survival, patterns of failure and overall survival. Patients must have a pathologically confirmed diagnosis of a thymic malignancy with radiologic or pathologic evidence of pleural metastases. Thymoma or thymic carcinoma are allowed. Patients may have de novo stage IVA disease or recurrent disease in the pleura. There must be no evidence of extrathoracic metastatic disease or contralateral pleural/pericardial disease. Surgical resection of the pleural nodules (ex: pleurectomy/decortication, debulking/metastasectomy) are allowed. Extrapleural pneumonectomy is not allowed. Patients are excluded if they have undergone prior thoracic radiation therapy preventing hemithoracic pleural IMRT, whereas prior thymic bed radiation and/or prior pleural SBRT are allowed. RT will be administered to the ipsilateral pleura to 50.4 Gy in 28 fractions. An optional dose-painting boost to gross disease up to 60 Gy while respecting normal tissue constraints is allowed. Patients can be treated with photon or proton therapy. Simulation, contouring and RT planning guidelines have been developed. Patients will be followed per protocol at regular intervals for at least 12 months following RT. The expected accrual is 36 patients over 4 years. Further information can be found on clinicaltrials.gov (NCT05354570).

RESULTS

To be determined.

CONCLUSION

To be determined.

Biological Effective Dose (BED) in Evaluation of Rectal Dose in Prostate Cancer Patients with Hydrogel Spacer Who Underwent an EBRT with Different Fractionation Schemes

PURPOSE/OBJECTIVE(S)

To evaluate rectal dose sparing in prostate cancer patients with hydrogel spacer who underwent an external beam radiotherapy (EBRT) with different fractionation schemes.

MATERIALS/METHODS

In a previous study, we have reported that rectal sparing was achieved in prostate cancer patients with hydrogel spacer who underwent a combination therapy of EBRT and LDR brachytherapy (Zhang H, et al. J Appl Clin Med Phys, 2022). In this study, we focused on evaluation of spacer-related rectal sparing in patients who underwent an EBRT with conventional fractionation (81 Gy in 45 fractions), hypofractionation (70 Gy in 28 fractions), or stereotactic body radiotherapy (SBRT) for 40 Gy or 42.5 Gy in 5 fractions. In 172 patients, 119 patients were applied with injection of polyethylene-glycol hydrogel and others without the injection as control. In VMAT plans, doses to rectal wall were examined and converted to BED according to AAPM TG-137 (α/β ratio = 4 Gy).

RESULTS

On average, an interspace of 1cm between prostate and rectum was achieved by spacer insertion. Rectal wall was defined as 0.4cm thickness inside the outer contour of rectum, and the volume ranged from 4.5 cm3 to 21.3cm3 for patients with spacer and from 8.2cm3 to 35.1cm3 for those with no spacer. In conventional scheme, an average rectal BED was 120.0 Gy, 116.9 Gy, 114.0 Gy, 108.6 Gy, 87.6 Gy and 55.6 Gy to the volume of 0.1, 0.5, 1, 2, 5 and 10cm3, respectively, and BEDmean was 55.3 Gy in patients with no spacer. The BED decreased to 105.1 Gy, 96.3 Gy, 86.1 Gy, 75.4 Gy, 51.7 Gy and 26.9 Gy to the volume of 0.1, 0.5, 1, 2, 5 and 10cm3, respectively (p < 0.01), and BEDmean was 46.0 Gy in patients with spacer. In hypofractionation, rectal BED was in average of 115.8 Gy, 112.3 Gy, 109.8 Gy, 103 Gy, 81.6 and 52.8 Gy to the volume of 0.1, 0.5, 1, 2, 5 and 10cm3, respectively, and BEDmean was 48.6 Gy in patients with no spacer. Patients with spacer had significantly decreases of rectal BED, an average of 103 Gy, 91.7 Gy, 84.1 Gy, 72.8 Gy, 48.8 Gy and 26.0 Gy to the volume of 0.1, 0.5, 1, 2, 5 and 10cm3, respectively (p < 0.01), BEDmean was 42.4 Gy. In SBRT, average rectal BED in patients with spacer decreased to 93.6 Gy, 78.4 Gy, 69 Gy, 57.5 Gy, 38.5 Gy and 21.5 Gy, in comparison of 124.1 Gy, 117,4 Gy, 110.9 Gy, 97.3 Gy, 59.7 Gy and 32.3 Gy to the volume of 0.1, 0.5, 1, 2, 5 and 10cm3 in those without spacer, respectively (p <0.01). BEDmean decreased to 32.0 Gy in patient with spacer, compared with 43.2 Gy in those with no spacer.

CONCLUSION

Insertion of hydrogel spacer significantly improved rectal dose sparing, about 11.1% to 50.8% in conventional scheme, 12.4% to 51.6% in hypofractionation scheme, and 24.6% to 40.9% in SBRT patients. Furthermore, relatively more dose sparing on rectum was seen on the volume from 0.1cm3 to 2cm3 in SBRT patients.

Implementation of L4 Automation for Patient-Specific Quality Assurance Using the AUTOFRAME Platform and a Robotic Mechanism

PURPOSE/OBJECTIVE(S)

The AUTOFRAME platform has been previously developed for automating clinical workflows and has achieved L3 automation for patient-specific quality assurance (PSQA). The aim of this study is to further develop the platform to achieve L4 automation, which extends AUTOFRAME to operate Varian's control console (VCC) for the linear accelerator. The goal is to automate all PSQA operations outside of the treatment room.

MATERIALS/METHODS

The automated stages, listed in Table 1, are ranging from L0 to L5. The current study focuses on L4 automation of PSQA, which uses a 6-axis robot arm to control buttons on the VCC. The robotic arm is mounted on a custom frame that is attached onto the VCC to maintain its relative position. The arm is controlled through python scripts, which is run on a raspberry pi and communicates with the AUTOFRAME platform via the PyFlow and AutoFlow subsystems. This integration allows the robotic arm to receive commands from AutoFlow and execute them through PyFlow, activating real-time button-pressing actions.

RESULTS

The integrated L4 system was tested using real PSQA verification plans, which involved a minimum of 4 actions and a maximum of 9 actions on the VCC, including a couch kick that required overriding the couch position. The results showed that the 6-axis arm was able to correctly execute the action groups and guide the robotic arm to consistently press and hold each button with sufficient force and accuracy. All buttons on the VCC, including the Motion-enable, Preparing, Readying, and Delivering buttons, were correctly pushed and held according to the PSQA steps. The system successfully delivered all beams without interruption, and all beam delivery data was collected by the detector for PSQA analysis.

CONCLUSION

The study has further developed the AUTOFRAME platform for L4 automation of PSQA procedures can be achieved. The robotic arm is capable of pushing all required buttons, eliminating all human interactions on the VCC. When combined with previous L0-L3 automations, this will move towards full automation of PSQA procedures. Future work will focus on improving the system's flexibility, stability, and extending its operations to other QA tasks.

Comparison of Early Outcomes of Stereotactic Accelerated Partial Breast Irradiation vs. Volumetric Modulated Arc Therapy-Based FAST-FORWARD Whole Breast Irradiation for Breast Cancer

PURPOSE/OBJECTIVE(S)

Despite evidence supporting APBI from 8 published prospective randomized trials enrolling over 10,000 women, the uptake of APBI in clinical practice is surprisingly low. This is being exacerbated by a new, convenient, and safe shortened WBI schedule. Here, we report the dosimetric and early outcome analyses of the first >1000 patients treated at our institution since the first adoption of stereotactic APBI and the ultra-hypofractionated WBI regimen.

MATERIALS/METHODS

From 2016 to 2022, 801 women with breast cancers in the suitable or cautionary categories according to the ASTRO APBI consensus panel guidelines, received 30 Gy in 5 fractions (92%) either using a robotic stereotactic radiation system (83%) or stereotactic volumetric-based arc therapy (VMAT, 17%). Between 2020 and 2022, 468 women, who were not candidates for APBI and not undergoing any regional irradiation received 26 Gy in 5 fractions using VMAT to the whole breast with the addition of cardiac sparing technique in left-sided breast cancer patients. Tumor bed boosts were delivered in 99% of FF-WBI patients. We evaluated dose-volume histogram parameters for target volumes and organs-at-risk and radiation-related toxicities during RT or within 6 months after the end of RT.

RESULTS

Target volume coverage was acceptable in both groups, with mean 96% of the target volumes receiving 95% of the prescribed doses and 0 cm3 within target volumes exceeding 105% of the prescribed doses. S-APBI resulted in small, but statistically significant, reductions in the radiation dose delivered to the ipsilateral breast, contralateral breast, lungs, heart, and coronary artery compared with FF-WBI. Comparing WBI to APBI, the mean contralateral breast dose, ipsilateral lung V20 Gy, mean contralateral lung dose, and mean heart dose, were reduced by 89%, 78%, 73%, and 29%, respectively. With median follow-up periods of 32 months for s-APBI and 19 months for FF-WBI, acute toxicity was assessable in all patients. The risks of any grade acute toxicity were 21% for s-APBI and 25% for FF-WBI (p = .117). Among them, grade 2 rates were 1.3% in both groups and no severe toxicity has been reported.

CONCLUSION

We found s-APBI and VMAT-based FF WBI were associated with favorable dosimetric and acute toxicity profiles. However, considering significantly less irradiated volume in the breast, lungs, and heart, APBI with advanced available technique options should be considered over any WBI-based approach for patients at low risk for local recurrence.

Final Analysis of a Phase III Controlled Randomized Study of Stereotactic Body Proton Therapy or Conventionally Fractionated Proton Therapy for Early Prostate Cancer: PCG GU002

PURPOSE/OBJECTIVE(S)

To determine if stereotactic body proton therapy (SBPT) is non-inferior to conventionally fractionated proton therapy (CFPT) in patients with early prostate cancer.

MATERIALS/METHODS

Multicenter, randomized, controlled, open-label, non-inferiority phase 3 trial that included patients with histologically confirmed low-risk prostate adenocarcinoma defined by Gleason score ≤6, PSA <10 ng/mL, and clinical stage T1-2a N0 M0 by AJCC 7th Ed. Eligible participants were randomly assigned (initially 1:1 and later 2:1 ratio) to CFPT (79.2 Gy in 44 fractions for 9 weeks) or SBPT (38 Gy in 5 fractions for 1 week). Concurrent or adjuvant androgen deprivation therapy was not allowed. The primary endpoint was freedom from failure (FFF) at 2 years, defined as the first occurrence of local, regional, or distant recurrence, biochemical failure by the Phoenix definition (increase of PSA ≥2 ng/mL over the nadir PSA), or the start of salvage therapy including ADT. Secondary endpoints included GI and GU grade ≥2 toxicity according to CTCAE v4 criteria, as well as health-related quality of life (HRQoL) metrics assessed by AUASI and EPIC scores. Non-inferiority would be declared if the 1-sided 95% confidence interval limit for the difference in 2-year FFF rate was below 4.2% between both groups by Clopper-Pearson exact method.

RESULTS

Between November 2010 and September 2020, 133 patients were enrolled and randomly assigned to CFPT (n = 45) or SBPT (n = 88). Median follow-up was 5 years (IQ 3.9-5.2), with the last patient enrolled followed for at least 2 years. The 2-year FFF was 100% for both groups, fulfilling the pre-specified criteria for non-inferiority of SBPT compared to CFPT. By KM estimates, 5-year FFF was 97.4% and 100% (P = 0.1), and the 5-year OS was 97.1% and 95.5% (P = 0.46) for patients treated with CFPT and SBPT, respectively. The cumulative incidence of any grade ≥3 toxicities at 5 years was 0% and 5.7% (P = 0.14) for patients treated with CFPT and SBPT, respectively. The frequency of GI grade ≥2 toxicity at 6 months was of 0% and 2.3% (P = 0.55), and at 2 years was of 6.7% and 3.4% (P = 0.69) for patients treated with CFPT and SBPT, respectively. The frequency of GU grade ≥2 toxicity at 6 months was of 2.2% and 5.7% (P = 0.42), and at 2 years was of 8.9% and 5.7% (P = 0.54) for patients treated with CFPT and SBPT, respectively. Changes in HRQoL scores at 2 years were similar between groups (Table).

CONCLUSION

SBPT is non-inferior to CFPT regarding FFF and associated with similar long-term toxicity rates and HRQoL metric scores.

Development of the Independent Dose Verification Method for the Ring Gantry PET/CT Linac

PURPOSE/OBJECTIVE(S)

The RefleXion Xi is a new external beam radiotherapy delivery modality combining kilovoltage fan-beam CT and on-board PET for Biology-guided Radiotherapy. Although the machine shares similar components with the Tomotherapy machine, it has unique hardware features such as stationary beam delivery system with couch increments. The goal of this study is to develop an in-house independent secondary dose calculation method for this ring gantry PET/CT Linac.

MATERIALS/METHODS

The method aggregates the beam intensities at each discrete firing gantry angle and couch moving position. The non-uniform intensity map is decomposed into a series of segments of uniform beam intensities, and then coordinates of beam segments were modified based on the relative distance from the dose calculation point to keep the calculation point in the same spot along the gantry rotation. The dose to the calculation point of each segment is determined by using measured tissue-maximum-ratio, output factors, and off-axis ratio by independent binary collimators. Two-dimensional convolution method is applied to integrate all dose contribution components in segment areas for efficient calculation. The final dose is obtained by summing all dose to the calculation point of segments for all firing gantry angle and couch position.

RESULTS

Twenty patients with different treatment sites including head and neck, prostate, and lung regions were analyzed. Comparison of the point dose calculated by the independent program to that calculated by the planning system has shown reasonable agreement within ±5%.

CONCLUSION

The independent dose verification program has been developed as an initial patient specific QA for improving patient safety. Further study will be performed to enhance the accuracy and reliability by including additional leakage and scatter models.

Auto Assistant VMAT Planning with HID Automation

PURPOSE/OBJECTIVE(S)

To develop a complete, robust, adaptable and fully customizable software interface for assisting treatment planning procedures on FDA approved commercial system. This will standardize treatment planning process and provide opening interface to other third-party clinical software packages, and introduce AI inference to optimize plan without breaking current clinical planning workflow.

MATERIALS/METHODS

Based on our clinical planning workflow, Varian Eclipse TPS were used. The general HID interface AUTOFLOW was developed with scripting language AutoIt and includes optical character reorganization (OCR) ability. The AUTOFLOW is fully customizable and adaptable for different VMAT planning process. The planning workflow and objective constraints template defined by Northwell health, CFAM are applied. AUTOFLOW operates automatically 3 standard planning interfaces (contouring, external beam planning and optimization) of Eclipse based on information in action tables. The information in the tables, such as auxiliary structures, field set up and initial optimization parameters, can be preset according to the plan template or from other 3rd party packages. Based on Northwell CFAM clinical planning protocol, the planning starts from post-contour approval. AUTOFLOW operates Eclipse to create auxiliary structures, set up planning fields then initiate plan optimization. During the optimization, the AUTOFLOW fills the constraint parameters and monitor the objective goals achievement by OCR. The updated parameters are introduced with our developing machine learning package. The whole planning process were assisted by AUTOFLOW automatically, while the planner can intercept the planning process as need.

RESULTS

The general interface, AUTOFLOW was developed and applied to automatically assist the VMAT procedure in prostate cases. For each prostate case, more than 213 human HID operations on computers were removed from the plan procedure in our CFAM planning protocol. 12 prostate cases without manual interception were tested. The interface succeeds to reducing the VMAT planning time and planner still own the planning control.

CONCLUSION

The AUTOFLOW software interface can be used to perform VMAT planning in current commercial clinical planning system. It can automatically assist planner operation and provide standard interface to 3rd party software packages. The future works will focus on building a cohesive UI, reducing the time further by improving the prediction of optimization parameters and other treatment sites.

Thermophysical properties and atomic structure of liquid Zr-Nb alloys investigated by electrostatic levitation and molecular dynamics simulation

The investigation of the thermophysical properties of liquid Zr-Nb alloys holds great significance for theoretical research and technical application in liquid physics. However, the high temperatures involved make their experimental measurement challenging. In this study, the densities of liquid Zr-xwt.% Nb (x= 1.0, 2.5, 6.0) alloys were examined by electrostatic levitation and molecular dynamics calculation. Remarkably, the alloys achieved maximum undercooling of 335 K, 311 K and 326 K, respectively. Correspondingly, the densities are 6.20, 6.22 and 6.26 g·cm-3at the liquidus temperatures (TL), respectively. The corresponding temperature coefficients are 2.61 × 10-4, 2.75 × 10-4and 2.84 × 10-4g·cm-3·K-1, respectively. Notably, the experimental density results align well with the simulated results. Moreover, the molar volume (Vm), thermal expansion coefficient (α) and diffusion coefficient (D) were derived based on the experimental data and simulations. The thermal expansion coefficients reduce linearly with decreasing temperature. The analysis of the pair distribution function, coordination number (CN) and the radial distribution function reveals the temperature-dependent evolution of the atomic structure. TheCNtotalandCNZr-Zrinitially increase and then decrease with decreasing temperature, while the change trends forCNZr-NbandCNNb-Nbvaried among the three alloys. The radial distribution function of three liquid alloys reveals that the atomic number density increases as the temperature drops. Additionally, the total diffusion coefficients decrease with the reduction of temperature and the rise of Nb content from 1.0 wt.% Nb to 6.0 wt.% Nb.

Research on the Flexural Performance of Steel Pipe Steel Slag Powder Ultra-High-Performance Concrete Components

In order to study the flexural performance of the combined structure of steel-pipe and steel slag powder ultra-high-performance concrete (UHPC), nine round steel-pipe beams filled with steel slag powder UHPC of different types were fabricated according to the orthogonal test method with the steel pipe type, coarse aggregate content, steel fiber admixture, and curing system as parameters. The broken ring morphology, deformation characteristics, deflection distribution, and flexural bearing capacity of the steel-pipe-UHPC beams were analyzed via a pure bending test and a finite element simulation. The results show that the damage morphology of the round steel-tube-UHPC beams prepared by using steel slag powder UHPC as the inner filling material was "bow damage" under the pure bending load, and the load capacity was higher. When the cross-sectional deflection reached L/30, the external load was still not reduced, and the steel-tube-steel-slag powder-UHPC beam had a better plastic deformation capacity and a later flexural bearing capacity. The type of steel tube had a significant influence on the flexural bearing capacity of the steel-tube-UHPC beam, and the larger the diameter of the steel tube section and the thicker the tube wall, the higher its flexural bearing capacity. The calculated ultimate flexural bearing capacity by the finite element software and the test results had a stable error between 5.6% and 11.2%, which indicates that the model was reasonably established. The research results can provide a reference for the application of steel pipe UHPC engineering.

mTOR-Mediated Immunometabolic Reprogramming Nanomodulators Enable Sensitive Switching of Energy Deprivation-Induced Microglial Polarization for Alzheimer's Disease Management

Metabolic reprogramming that senses brain homeostasis imbalances is necessary to drive detrimental microglial polarization, and specific targeting of this process contributes to the flexible control of pathological inflammatory responses in Alzheimer's disease (AD), displaying distinctive therapeutic benefits. Herein, glutathione-functionalized gold nanocages loaded with the immunosuppressant fingolimod hydrochloride are developed as brain-targeted and microglia-located immunometabolic reprogramming nanomodulators (GAF NPs) for AD management. By virtue of glutathione-mediated transport properties, this nanomodulator can cross the blood-brain barrier and localize to microglia in AD lesions. Through blocking Akt/mTOR/HIF-1α signaling pathways, GAF NPs not only promote the dominated metabolic shift from glycolysis to oxidative phosphorylation under immune activation but also inhibit transporter-mediated glucose overconsumption by microglia. Correlation analysis based on real-time bioenergetic assessment and 18F-labeled fluorodeoxyglucose (FDG) PET reveals that brain glucose utilization and metabolism restored by GAF NP treatment can serve as a sensitive and effective indicator for microglial M1 to M2 polarization switching, ultimately alleviating neuroinflammation and its derived neurodegeneration as well as ameliorating cognitive decline in AD mice. This work highlights a potential nanomedicine aimed at modifying mTOR-mediated immunometabolic reprogramming to halt energy deprivation-induced AD progression.

Active-feedback quantum control of an integrated low-frequency mechanical resonator

Preparing a massive mechanical resonator in a state with quantum limited motional energy provides a promising platform for studying fundamental physics with macroscopic systems and allows to realize a variety of applications, including precise sensing. While several demonstrations of such ground-state cooled systems have been achieved, in particular in sideband-resolved cavity optomechanics, for many systems overcoming the heating from the thermal bath remains a major challenge. In contrast, optomechanical systems in the sideband-unresolved limit are much easier to realize due to the relaxed requirements on their optical properties, and the possibility to use a feedback control schemes to reduce the motional energy. The achievable thermal occupation is ultimately limited by the correlation between the measurement precision and the back-action from the measurement. Here, we demonstrate measurement-based feedback cooling on a fully integrated optomechanical device fabricated using a pick-and-place method, operating in the deep sideband-unresolved limit. With the large optomechanical interaction and a low thermal decoherence rate, we achieve a minimal average phonon occupation of 0.76 when pre-cooled with liquid helium and 3.5 with liquid nitrogen. Significant sideband asymmetry for both bath temperatures verifies the quantum character of the mechanical motion. Our method and device are ideally suited for sensing applications directly operating at the quantum limit, greatly simplifying the operation of an optomechanical system in this regime.

Recent advances in metasurface design and quantum optics applications with machine learning, physics-informed neural networks, and topology optimization methods

As a two-dimensional planar material with low depth profile, a metasurface can generate non-classical phase distributions for the transmitted and reflected electromagnetic waves at its interface. Thus, it offers more flexibility to control the wave front. A traditional metasurface design process mainly adopts the forward prediction algorithm, such as Finite Difference Time Domain, combined with manual parameter optimization. However, such methods are time-consuming, and it is difficult to keep the practical meta-atom spectrum being consistent with the ideal one. In addition, since the periodic boundary condition is used in the meta-atom design process, while the aperiodic condition is used in the array simulation, the coupling between neighboring meta-atoms leads to inevitable inaccuracy. In this review, representative intelligent methods for metasurface design are introduced and discussed, including machine learning, physics-information neural network, and topology optimization method. We elaborate on the principle of each approach, analyze their advantages and limitations, and discuss their potential applications. We also summarize recent advances in enabled metasurfaces for quantum optics applications. In short, this paper highlights a promising direction for intelligent metasurface designs and applications for future quantum optics research and serves as an up-to-date reference for researchers in the metasurface and metamaterial fields.

Experimental and numerical study on gas production decline trend under ultralong-production-cycle from shale gas wells

It is of engineering interest to explore recovered shale gas composition and its effects on total gas production trend over a long-term extraction period. However, there are previous experimental studies mostly focused on short term development for small scaled cores, which is less convincing to mimic reservoir-scaled shale production process. In addition, the previous production models mostly failed to account for comprehensive gas nonlinear effects. As a result, in this paper, to illustrate the full-life-cycle production decline phenomenon for shale gas reservoir, dynamic physical simulation was performed for more than 3433 days to simulate shale gas transport out of the formations over a relatively long production period. Moreover, a five-region seepage mathematical model was then developed and was subsequently validated by the experimental results and shale well production data. Our findings show that for physical simulation, both the pressure and production declined steadily at an annual rate of less than 5%, and 67% of the total gas in the core was recovered. These test data supported earlier finding that shale gas is of low flow ability and slow pressure decline in the shale matrices. The production model indicated that free gas accounts for the majority of recovered shale gas at the initial stage. Based on a shale gas well example, free gas extraction makes up 90% of produced total gas. The adsorbed gas constitutes a primary gas source during the later stage. Adsorbed gas contributes more than 50% of the gas produced in the seventh year. The 20-year-cumulative adsorbed gas makes up 21% of the EUR for a single shale gas well. The results of this study can provide a reference for optimizing production systems and adjusting development techniques for shale gas wells throughout the combinations of mathematical modeling and experimental approaches.

Childhood-Onset Lupus Nephritis in the Childhood Arthritis and Rheumatology Research Alliance Registry: Short-Term Kidney Status and Variation in Care

OBJECTIVE

The goal was to characterize short-term kidney status and describe variation in early care utilization in a multicenter cohort of patients with childhood-onset systemic lupus erythematosus (cSLE) and nephritis.

METHODS

We analyzed previously collected prospective data from North American patients with cSLE with kidney biopsy-proven nephritis enrolled in the Childhood Arthritis and Rheumatology Research Alliance (CARRA) Registry from March 2017 through December 2019. We determined the proportion of patients with abnormal kidney status at the most recent registry visit and applied generalized linear mixed models to identify associated factors. We also calculated frequency of medication use, both during induction and ever recorded.

RESULTS

We identified 222 patients with kidney biopsy-proven nephritis, with 64% class III/IV nephritis on initial biopsy. At the most recent registry visit at median (interquartile range) of 17 (8-29) months from initial kidney biopsy, 58 of 106 patients (55%) with available data had abnormal kidney status. This finding was associated with male sex (odds ratio [OR] 3.88, 95% confidence interval [95% CI] 1.21-12.46) and age at cSLE diagnosis (OR 1.23, 95% CI 1.01-1.49). Patients with class IV nephritis were more likely than class III to receive cyclophosphamide and rituximab during induction. There was substantial variation in mycophenolate, cyclophosphamide, and rituximab ever use patterns across rheumatology centers.

CONCLUSION

In this cohort with predominately class III/IV nephritis, male sex and older age at cSLE diagnosis were associated with abnormal short-term kidney status. We also observed substantial variation in contemporary medication use for pediatric lupus nephritis between pediatric rheumatology centers. Additional studies are needed to better understand the impact of this variation on long-term kidney outcomes.

A DNA Replication Stress-Based Prognostic Model for Lung Adenocarcinoma

Tumor cells endure continuous DNA replication stress, which opens the way to cancer development. Despite previous research, the prognostic implications of DNA replication stress on lung adenocarcinoma (LUAD) have yet to be investigated. Here, we aimed to investigate the potential of DNA replication stress-related genes (DNARSs) in predicting the prognosis of individuals with LUAD. Differentially expressed genes (DEGs) originated from the TCGA-LUAD dataset, and we constructed a 10-gene LUAD prognostic model based on DNARSs-related DEGs (DRSDs) using Cox regression analysis. The receiver operating characteristic (ROC) curve demonstrated excellent predictive capability for the LUAD prognostic model, while the Kaplan-Meier survival curve indicated a poorer prognosis in a high-risk (HR) group. Combined with clinical data, the Riskscore was found to be an independent predictor of LUAD prognosis. By incorporating Riskscore and clinical data, we developed a nomogram that demonstrated a capacity to predict overall survival and exhibited clinical utility, which was validated through the calibration curve, ROC curve, and decision curve analysis curve tests, confirming its effectiveness in prognostic evaluation. Immune analysis revealed that individuals belonging to the low-risk (LR) group exhibited a greater abundance of immune cell infiltration and higher levels of immune function. We calculated the immunopheno score and TIDE scores and tested them on the IMvigor210 and GSE78220 cohorts and found that individuals categorized in the LR group exhibited a higher likelihood of deriving therapeutic benefits from immunotherapy intervention. Additionally, we predicted that patients classified in the HR group would demonstrate enhanced sensitivity to Docetaxel using anti-tumor drugs. To summarize, we successfully developed and validated a prognostic model for LUAD by incorporating DNA replication stress as a key factor.

Transcriptomic and clinical heterogeneity of metastatic disease timing within metastatic castration-sensitive prostate cancer

BACKGROUND

Metastatic castration-sensitive prostate cancer (mCSPC) is commonly classified into high- and low-volume subgroups which have demonstrated differential biology, prognosis, and response to therapy. Timing of metastasis has similarly demonstrated differences in clinical outcomes; however, less is known about any underlying biologic differences between these disease states. Herein, we aim to compare transcriptomic differences between synchronous and metachronous mCSPC and identify any differential responses to therapy.

PATIENTS AND METHODS

We performed an international multi-institutional retrospective review of men with mCSPC who completed RNA expression profiling evaluation of their primary tumor. Patients were stratified according to disease timing (synchronous versus metachronous). The primary endpoint was to identify differences in transcriptomic profiles between disease timing. The median transcriptomic scores between groups were compared with the Mann-Whitney U test. Secondary analyses included determining clinical and transcriptomic variables associated with overall survival (OS) from the time of metastasis. Survival analysis was carried out with the Kaplan-Meier method and multivariable Cox regression.

RESULTS

A total of 252 patients were included with a median follow-up of 39.6 months. Patients with synchronous disease experienced worse 5-year OS (39% versus 79%; P < 0.01) and demonstrated lower median androgen receptor (AR) activity (11.78 versus 12.64; P < 0.01) and hallmark androgen response (HAR; 3.15 versus 3.32; P < 0.01). Multivariable Cox regression identified only high-volume disease [hazard ratio (HR) = 4.97, 95% confidence interval (CI) 2.71-9.10; P < 0.01] and HAR score (HR = 0.51, 95% CI 0.28-0.88; P = 0.02) significantly associated with OS. Finally, patients with synchronous (HR = 0.47, 95% CI 0.30-0.72; P < 0.01) but not metachronous (HR = 1.37, 95% CI 0.50-3.92; P = 0.56) disease were found to have better OS with AR and non-AR combination therapy as compared with monotherapy (P value for interaction = 0.05).

CONCLUSIONS

We have demonstrated a potential biologic difference between metastatic timing of mCSPC. Specifically, for patients with low-volume disease, those with metachronous low-volume disease have a more hormone-dependent transcriptional profile and exhibit a better prognosis than synchronous low-volume disease.

Scutellaria baicalensis enhances 5-fluorouracil-based chemotherapy via inhibition of proliferative signaling pathways

Fluoropyridine-based chemotherapy remains the most widely used treatment for colorectal cancer (CRC). In this study, we investigated the mechanism by which the natural product Scutellaria baicalensis (Huang Qin; HQ) and one of its main components baicalin enhanced 5-fluorouracil (5-FU) antitumor activity against CRC. Cell proliferation assays, cell cycle analysis, reverse-phase protein array (RPPA) analysis, immunoblot analysis, and qRT-PCR were performed to investigate the mechanism(s) of action of HQ and its active components on growth of CRC cells. HQ exhibited in vitro antiproliferative activity against drug resistant human CRC cells, against human and mouse CRC cells with different genetic backgrounds and normal human colon epithelial cells. In vivo animal models were used to document the antitumor activity of HQ and baicalin. The mechanism of growth inhibitory activity of HQ is due to inhibition of proliferative signaling pathways including the CDK-RB pathway. In addition, HQ enhanced the antitumor effects of 5-FU and capecitabine in vivo. Furthermore, we identified baicalin as an active component of HQ. The combination of baicalin and 5-FU demonstrated synergistic activity against 5-FU-resistant RKO-R10 cells. The combination significantly inhibited in vivo tumor growth greater than each treatment alone. RPPA results showed that the signaling pathway alterations in CRC cells were similar following HQ and baicalin treatment. Together, these results indicate that HQ and its component baicalin enhance the effect of 5-fluorouracil-based chemotherapy via inhibition of CDK-RB pathway. These findings may provide the rational basis for developing agents that can overcome the development of cellular drug resistance. Video Abstract.

ROS Responsive Nanoparticles Encapsulated with Natural Medicine Remodel Autophagy Homeostasis in Breast Cancer

In photodynamic therapy (PDT), elevated reactive oxygen species (ROS) activate tumor cell protective autophagy, therefore attenuating the antitumor function of therapy. Hence, inhibition of protective autophagy in tumors can improve the antitumor effect of PDT. Herein, an innovative nanotraditional Chinese medicine system ((TP+A)@TkPEG NPs), which remodeled autophagy homeostasis, was fabricated. A photosensitizer aggregation inducing emission (AIE) and autophagy modulator triptolide (TP, an active ingredient of Tripterygium wilfordii Hook F) were encapsulated into ROS-responsive nanoparticles to improve antitumor effect of PDT in treatment of triple negative breast cancer. We proved that (TP+A)@TkPEG NPs effectively elevated intracellular ROS levels, activated ROS-responsive release of TP and inhibited the proliferation of 4T1 cells in vitro. More importantly, it sharply reduced autophagy related genes transcription and proteins expression in 4T1 cells, then promote cell apoptosis. In addition, this nanoherb therapeutic system effectively orientated to tumor sites, achieved efficient inhibition of tumor, and extended the survival time of 4T1-bearing mice in vivo. Further results confirmed that (TP+A)@TkPEG NPs remarkably inhibit the expression level of autophagy related initiation gene (becline-1) and elongation protein (light chain 3B) in tumor microenvironment and then block PDT induced protective autophagy. In brief, this system can remodel autophagy homeostasis and serve as an innovative approach for treatment of triple negative breast cancer.

Nacre-Inspired Strong MXene/Cellulose Fiber with Superior Supercapacitive Performance via Synergizing the Interfacial Bonding and Interlayer Spacing

MXene fibers are promising candidates for weaveable and wearable energy storage devices because of their good electrical conductivity and high theoretical capacitance. Herein, we propose a nacre-inspired strategy for simultaneously improving the mechanical strength, volumetric capacitance, and rate performance of MXene-based fibers through synergizing the interfacial interaction and interlayer spacing between Ti₃C₂T_X nanosheets. The optimized hybrid fibers (M-CMC-1.0%) with 99 wt % MXene loading exhibit an improved tensile strength of ∼81 MPa and a high specific capacitance of 885.0 F cm^-3 at 1 A cm^-3 together with an outstanding rate performance of 83.6% retention at 10 A cm^-3 (740.0 F cm^-3). As a consequence, the fiber supercapacitor (FSC) based on the M-CMC-1.0% hybrid delivers an output capacitance of 199.5 F cm^-3, a power density of 1186.9 mW cm^-3, and an energy density of 17.7 mWh cm^-3, respectively, implying its promising applications as portable energy storage devices for future wearable electronics.

A tera-electron volt afterglow from a narrow jet in an extremely bright gamma-ray burst

Some gamma-ray bursts (GRBs) have a tera-electron volt (TeV) afterglow, but the early onset of this has not been observed. We report observations with the Large High Altitude Air Shower Observatory of the bright GRB 221009A, which serendipitously occurred within the instrument field of view. More than 64,000 photons >0.2 TeV were detected within the first 3000 seconds. The TeV flux began several minutes after the GRB trigger, then rose to a peak about 10 seconds later. This was followed by a decay phase, which became more rapid ~650 seconds after the peak. We interpret the emission using a model of a relativistic jet with half-opening angle ~0.8°. This is consistent with the core of a structured jet and could explain the high isotropic energy of this GRB.

A distinct Golgi-targeting mechanism of dGM130 in Drosophila neurons

GM130 is a matrix protein that is conserved in metazoans and involved in the architecture of the Golgi apparatus. In neurons, Golgi apparatus and dendritic Golgi outposts (GOs) have different compartmental organizations, and GM130 localization is present in both, indicating that GM130 has a unique Golgi-targeting mechanism. Here, we investigated the Golgi-targeting mechanism of the GM130 homologue, dGM130, using in vivo imaging of Drosophila dendritic arborization (da) neurons. The results showed that two independent Golgi-targeting domains (GTDs) with different Golgi localization characteristics in dGM130, together determined the precise localization of dGM130 in both the soma and dendrites. GTD1, covering the first coiled-coil region, preferentially targeted to somal Golgi rather than GOs; whereas GTD2, containing the second coiled-coil region and C-terminus, dynamically targeted to Golgi in both soma and dendrites. These findings suggest that there are two distinct mechanisms by which dGM130 targets to the Golgi apparatus and GOs, underlying the structural differences between them, and further provides new insights into the formation of neuronal polarity.

Vacuum-assisted tissue embedding for whole-heart imaging

The use of combined optical imaging and tissue sectioning has potential for use in visualizing heart-wide fine structures at single-cell resolution. However, existing tissue preparation methods fail to generate ultrathin cavity-containing cardiac tissue slices with minimal deformation. This study developed an efficient vacuum-assisted tissue embedding method to prepare high-filled, agarose-embedded whole-heart tissue. Utilizing optimized vacuum parameters, we achieved 94% filled whole-heart tissue with the thinnest cut slice of 5 µm. We subsequently imaged a whole mouse heart sample using vibratome-integrated fluorescence micro-optical sectioning tomography (fMOST) with a voxel size of 0.32 µm × 0.32 µm × 1 µm. The imaging results indicated that the vacuum-assisted embedding method enabled whole-heart tissue to withstand long-term thin cutting while ensuring that slices were consistent and of high quality.

Adsorption and intracellular uptake of mercuric mercury and methylmercury by methanotrophs and methylating bacteria

The cell surface adsorption and intracellular uptake of mercuric Hg(II) and methylmercury (MeHg) are important in determining the fate and transformation of Hg in the environment. However, current information is limited about their interactions with two important groups of microorganisms, i.e., methanotrophs and Hg(II)-methylating bacteria, in aquatic systems. This study investigated the adsorption and uptake dynamics of Hg(II) and MeHg by three strains of methanotrophs, Methylomonas sp. Strain EFPC3, Methylosinus trichosporium OB3b, and Methylococcus capsulatus Bath, and two Hg(II)-methylating bacteria, Pseudodesulfovibrio mercurii ND132 and Geobacter sulfurreducens PCA. Distinctive behaviors of these microorganisms towards Hg(II) and MeHg adsorption and intracellular uptake were observed. The methanotrophs generally took up 60-80% of inorganic Hg(II) inside cells after 24 h incubation, lower than methylating bacteria (>90%). Approximately 80-95% of MeHg was rapidly taken up by all the tested methanotrophs within 24 h. In contrast, after the same time, G. sulfurreducens PCA adsorbed 70% but took up <20% of MeHg, while P. mercurii ND132 only adsorbed 20% but took up negligible amounts of MeHg. These results suggest that microbial surface adsorption and intracellular uptake of Hg(II) and MeHg depend on the specific types of microbes and appear to be related to microbial physiology that requires further detailed investigation. Despite being incapable of methylating Hg(II), methanotrophs play important roles in immobilizing both Hg(II) and MeHg, potentially influencing their bioavailability and trophic transfer. Therefore, methanotrophs are not only important sinks for methane but also for Hg(II) and MeHg and can influence the global cycling of C and Hg.