van der Waals Metal-Organic Framework as an Excitonic Material for Advanced Photonics

Exfoliation of 2D Metal-Organic Frameworks: toward Advanced Scalable Materials for Optical Sensing

Two-dimensional metal-organic frameworks (MOFs) occupy a special place among the large family of functional 2D materials. Even at a monolayer level, 2D MOFs exhibit unique sensing, separation, catalytic, electronic, and conductive properties due to the combination of porosity and organo-inorganic nature. However, lab-to-fab transfer for 2D MOF layers faces the challenge of their scalability, limited by weak interactions between the organic and inorganic building blocks. Here, comparing three top-down approaches to fabricate 2D MOF layers (sonication, freeze-thaw, and mechanical exfoliation), The technological criteria have established for creation of the layers of the thickness up to 1 nm with a record aspect ratio up to 2*10^4:1. The freezing-thaw and mechanical exfoliation are the most optimal approaches; wherein the rate and manufacturability of the mechanical exfoliation rivaling the greatest scalability of 2D MOF layers obtained by freezing-thaw (21300:1 vs 1330:1 aspect ratio), leaving the sonication approach behind (with a record 900:1 aspect ratio) have discovered. The high quality 2D MOF layers with a record aspect ratio demonstrate unique optical sensitivity to solvents of a varied polarity, which opens the way to fabricate scalable and freestanding 2D MOF-based atomically thin chemo-optical sensors by industry-oriented approach.

Laser-Assisted Design of MOF-Derivative Platforms from Nano- to Centimeter Scales for Photonic and Catalytic Applications

Laser conversion of metal-organic frameworks (MOFs) has recently emerged as a fast and low-energy consumptive approach to create scalable MOF derivatives for catalysis, energy, and optics. However, due to the virtually unlimited MOF structures and tunable laser parameters, the results of their interaction are unpredictable and poorly controlled. Here, we experimentally base a general approach to create nano- to centimeter-scale MOF derivatives with the desired nonlinear optical and catalytic properties. Five three- and two-dimensional MOFs, differing in chemical composition, topology, and thermal resistance, have been selected as precursors. Tuning the laser parameters (i.e., pulse duration from fs to ns and repetition rate from kHz to MHz), we switch between ultrafast nonthermal destruction and thermal decomposition of MOFs. We have established that regardless of the chemical composition and MOF topology, the tuning of the laser parameters allows obtaining a series of structurally different derivatives, and the transition from femtosecond to nanosecond laser regimes ensures the scaling of the derivatives from nano- to centimeter scales. Herein, the thermal resistance of MOFs affects the structure and chemical composition of the resulting derivatives. Finally, we outline the "laser parameters versus MOF structure" space, in which one can create the desired and scalable platforms with nonlinear optical properties from photoluminescence to light control and enhanced catalytic activity.

Metal-mediated tunability of MOF-based optical modulators

We report on the design of 1D MOFs based on a nopinane-annelated organic ligand and Co(II) or Ni(II), the variation of which allows tuning the optical modulation bandwidth. Structural and time-resolved analysis revealed the optical modulation mechanism, the rates and its endurance, thereby enriching the list of sustainable MOFs for tunable optical modulators.

Dimensionality Mediated Highly Repeatable and Fast Transformation of Coordination Polymer Single Crystals for All-Optical Data Processing

A family of coordination polymers (CPs) based on dynamic structural elements are of great fundamental and commercial interest addressing modern problems in controlled molecular separation, catalysis, and even data processing. Herein, the endurance and fast structural dynamics of such materials at ambient conditions are still a fundamental challenge. Here, we report on the design of a series of Cu-based CPs [Cu(bImB)Cl₂] and [Cu(bImB)₂Cl₂] with flexible ligand bImB (1,4-bis(imidazol-1-yl)butane) packed into one- and two-dimensional (1D, 2D) structures demonstrating dimensionality mediated flexibility and reversible structural transformations. Using the laser pulses as a fast source of activation energy, we initiate CP heating followed by anisotropic thermal expansion and 0.2-0.8% volume changes with the record transformation rates from 2220 to 1640 s^-1 for 1D and 2D CPs, respectively. The endurance over 10³ cycles of structural transformations, achieved for the CPs at ambient conditions, allows demonstrating optical fiber integrated all-optical data processing.

Optically Encodable and Erasable Multilevel Nonvolatile Flexible Memory Device Based on Metal-Organic Frameworks

Multilevel and flexible nonvolatile memory (NVM) is a promising candidate for data storage in next-generation devices but its high bias and low mobility of conducting channels are often its drawbacks. In this study, we demonstrate a low bias of smaller than 0.1 V and a high-mobility graphene layer as a conducting channel for flexible optoelectronic NVM based on a composite thin film of indium-based MOF-derived InCl₃ and 4,4-oxydiphthalic anhydride (odpta), Na[In₃(odpt)₂(OH)₂(H₂O)₂](H₂O)₄, and reduced graphene oxide (rGO). The optoelectronic NVM device can be encoded and erased optically by ultraviolet (UV) light and visible light, respectively. Our device also achieves memory states over 192 (6-bit storage) distinct levels, which can emerge as mass data storage. It also shows an excellent endurance of write-erase cycles under irradiation with a laser of varying wavelengths, the mechanical stability of more than 1000 bending cycles, and stable retention for longer than 10 000 s. These results open an alternative route for developing low bias and innovative optoelectronic technologies.

Picoseconds-Limited Exciton Recombination in Metal-Organic Chalcogenides Hybrid Quantum Wells

Metal-organic species can be designed to self-assemble in large-scale, atomically defined, supramolecular architectures. A particular example is hybrid quantum wells, where inorganic two-dimensional (2D) planes are separated by organic ligands. The ligands effectively form an intralayer confinement for charge carriers resulting in a 2D electronic structure, even in multilayered assemblies. Air-stable layered transition metal organic chalcogenides have recently been found to host tightly bound 2D excitons with strong optical anisotropy in a bulk matrix. Here, we investigate the excited carrier dynamics in the prototypical metal-organic chalcogenide [AgSePh]_∞, disentangling three excitonic resonances by low temperature transient absorption spectroscopy. Our analysis suggests a complex relaxation cascade comprising ultrafast screening and renormalization, interexciton relaxation, and self-trapping of excitons within a few picoseconds (ps). The ps-decay provided by the self-trapping mechanism may be leveraged to unlock the material's potential for ultrafast optoelectronic applications.

Light-Induced Color Switching of Single Metal-Organic Framework Nanocrystals

Photoinduced modulation of the optical parameters of nanomaterials underlies the operating principles of all-optical nanodevices. Here, we demonstrate the laser-induced 10% modulation of the refractive index and 16-fold modulation of the extinction coefficient of the dynamic metal-organic framework (HKUST-1) nanocrystals within the whole visible range. Using the laser-induced water sorption/desorption process inside HKUST-1, we have achieved size-dependent reversible tuning of brightness and color of its nanocrystals over the different spatial directions and color palette. The numerical analysis also confirmed the detected optical tuning through the evolution of optical spectra and directivity of the scattered light. The results of the work demonstrate the promising nature of the dynamic metal-organic frameworks for nonlinear optics and expand the library of chemically synthesized hybrid materials with light-controlled optical properties.

Interrogating Light-initiated Dynamics in Metal-Organic Frameworks with Time-resolved Spectroscopy

Time-resolved spectroscopy is an essential part of both fundamental and applied chemical research. Such techniques access light-initiated dynamics on time scales ranging from femtosecond to microsecond. Many techniques falling under this description have been applied to gain significant insight into metal-organic frameworks (MOFs), a diverse class of porous coordination polymers. MOFs are highly tunable, both compositionally and structurally, and unique challenges are encountered in applying time-resolved spectroscopy to interrogate their light-initiated properties. These properties involve various excited state mechanisms such as crystallographically defined energy transfer, charge transfer, and localization within the framework, photoconductivity, and structural dynamics. The field of time-resolved MOF spectroscopic studies is quite nascent; each original report cited in this review was published within the past decade. As such, this review is a timely and comprehensive summary of the most significant contributions in this emerging field, with focuses on the overarching spectroscopic concepts applied and on identifying key challenges and future outlooks moving forward.

Calcium-Based Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) built on calcium metal (Ca-MOFs) represent a unique subclass of MOFs featuring high stability, low toxicity, and relatively low density. Ca-MOFs show considerable potential for molecular separations, electronic, magnetic, and biomedical applications, although they are not investigated as extensively as transition metal-based MOFs. Compared to MOFs made of other groups of metals, Ca-MOFs may be particularly advantageous for certain applications such as adsorption and storage of light molecules because of their gravimetric benefit, and drug delivery due to their high biocompatibility. This review intends to provide an overview on the recent development of Ca-MOFs, including their synthesis, crystal structures, important properties, and related applications. Various synthetic methods and techniques, types of building blocks, structure and porosity features, selected physical properties, and potential uses will be discussed and summarized. Representative examples will be illustrated for each type of important applications with a focus on their structure-property relations.

A nonlinear optical cadmium(ii)-based metal–organic framework with chiral helical chains derived from an achiral bent dicarboxylate ligand

The design of a nonlinear optical (NLO) MOF material from an achiral bent dicarboxylate ligand is presented.

Photochromic Free MOF-Based Near-Infrared Optical Switch

We demonstrate herein an all-optical switch based on stimuli-responsive and photochromic-free metal-organic framework (HKUST-1). Ultrafast near-infrared laser pulses stimulate a reversible 0.4 eV blue shift of the absorption band with up to 200 s^-1 rate due to dehydration and concomitant shrinking of the structure-forming [Cu₂ C₄ O₈ ] cages of HKUST-1. Such light-induced switching enables the remote modulation of intensities of photoluminescence of single crystals of HKUST-1 as well visible radiation passing through the crystal by 2 order of magnitude. This opens up the possibility of utilyzing stimuli-responsive MOFs for all-optical data processing devices.

Fast Crystallization-Deposition of Orderly Molecule Level Heterojunction Thin Films Showing Tunable Up-Conversion and Ultrahigh Photoelectric Response

Molecular cocrystals have received much attention for tuning physicochemical properties in pharmaceutics, luminescence, organic electronics, and so on. However, the effective methods for the formation of orderly cocrystal thin films are still rather limited, which have largely restricted their photofunctional and optoelectronic applications. In this work, a fast crystallization-deposition procedure is put forward to obtain acridine (AD)-based cocrystals, which are self-assembled with three typical isophthalic acid derivatives (IPA, IPB, and TMA). The obtained donor-acceptor cocrystal complexes exhibit an adjustable energy level, wide range of photoluminescence color, and rotational angle-dependent polarized emission. The orderly and uniform cocrystal thin films further present tunable one-/two-photon up-conversion and different semiconductor properties. Particularly, AD-TMA cocrystal thin film shows a rare example of a molecule level heterojunction with the alternating arrangement of AD electronic acceptor layers and TMA electronic donor layers, and thus, provides a way for efficient mobility and separation of electron-hole pairs. A large on-off photocurrent ratio of more than 104 can be achieved for the AD-TMA thin film, which is higher than state-of-the-art molecular semiconductor systems. Therefore, this work extends the application scopes of orderly cocrystal thin film materials for future luminescent and optoelectronic micro-/nanodevices.

Polymer Matrix Incorporated with ZIF-8 for Application in Nonlinear Optics

Polymers with embedded metal–organic frameworks (MOFs) have been of interest in research for advanced applications in gas separation, catalysis and sensing due to their high porosity and chemical selectivity. In this study, we utilize specific MOFs with high thermal stability and non-centrosymmetric crystal structures (zeolitic imidazolate framework, ZIF-8) in order to give an example of MOF–polymer composite applications in nonlinear optics. The synthesized MOF-based polymethyl methacrylate (PMMA) composite (ZIF-8–PMMA) demonstrates the possibility of the visualization of near-infrared laser beams in the research lab. The resulting ZIF-8–PMMA composite is exposed to a laser under extreme conditions and exhibits enhanced operating limits, much higher than that of the widely used inorganic materials in optics. Overall, our findings support the utilization of MOFs for synthesis of functional composites for optical application.

Metal-Organic Frameworks in Modern Physics: Highlights and Perspectives

Owing to the synergistic combination of a hybrid organic-inorganic nature and a chemically active porous structure, metal-organic frameworks have emerged as a new class of crystalline materials. The current trend in the chemical industry is to utilize such crystals as flexible hosting elements for applications as diverse as gas and energy storage, filtration, catalysis, and sensing. From the physical point of view, metal-organic frameworks are considered molecular crystals with hierarchical structures providing the structure-related physical properties crucial for future applications of energy transfer, data processing and storage, high-energy physics, and light manipulation. Here, the perspectives of metal-organic frameworks as a new family of functional materials in modern physics are discussed: from porous metals and superconductors, topological insulators, and classical and quantum memory elements, to optical superstructures, materials for particle physics, and even molecular scale mechanical metamaterials. Based on complementary properties of crystallinity, softness, organic-inorganic nature, and complex hierarchy, a description of how such artificial materials have extended their impact on applied physics to become the mainstream in material science is offered.

Temperature-dependent interchromophoric interaction in a fluorescent pyrene-based metal-organic framework

Compounds exhibiting tuneable fluorescence emission upon heating or cooling are considered smart materials as their optical properties can be exquisitely controlled by adjusting the external temperature. Herein, we report such a material, which is a porous pyrene-based metal-organic framework with a chemical formula of [Mg1.5(HTBAPy)(H2O)2]·3DMF (H4TBAPy = 1,3,6,8-tetrakis(p-benzoic acid)pyrene), named SION-7. The bulk solid material of SION-7 can display either monomer or excimer fluorescence emission due to the temperature-dependent extent of interchromophoric interactions between the HTBAPy3- ligands within the framework. Consequently, the fluorescence emission colours gradually change from blue at low temperature (80 K) to yellow-green at high temperature (450 K). Interestingly, while kept in a relatively wide temperature range of 80-200 K, SION-7 displays a structured monomer-like spectrum and its colour changes reversibly from deep to light blue. Ex situ variable-temperature (100-350 K) single-crystal X-ray diffractometry studies revealed the impact of solvent content on the optical properties of SION-7, and illustrated the correlation between the position of the phenylene groups of the HTBAPy3- ligands at different temperatures and the interchromophoric interaction. Our study demonstrates a step forward towards the design of tuneable thermofluorochromic materials sought by optoelectronics.

Laser printing of optically resonant hollow crystalline carbon nanostructures from 1D and 2D metal-organic frameworks

Using a hybrid approach involving a slow diffusion method to synthesize 1D and 2D MOFs followed by their treatment with femtosecond infrared laser radiation, we generated 100-600 nm well-defined hollow spheres and hemispheres of graphite. This ultra-fast technique extends the library of shapes of crystalline MOF derivatives appropriate for all-dielectric nanophotonics.

Intrinsic measurements of exciton transport in photovoltaic cells

Organic photovoltaic cells are partiuclarly sensitive to exciton harvesting and are thus, a useful platform for the characterization of exciton diffusion. While device photocurrent spectroscopy can be used to extract the exciton diffusion length, this method is frequently limited by unknown interfacial recombination losses. We resolve this limitation and demonstrate a general, device-based photocurrent-ratio measurement to extract the intrinsic diffusion length. Since interfacial losses are not active layer specific, a ratio of the donor- and acceptor-material internal quantum efficiencies cancels this quantity. We further show that this measurement permits extraction of additional device-relevant information regarding exciton relaxation and charge separation processes. The generality of this method is demonstrated by measuring exciton transport for both luminescent and dark materials, as well as for small molecule and polymer active materials and semiconductor quantum dots. Thus, we demonstrate a broadly applicable device-based methodology to probe the intrinsic active material exciton diffusion length.

Zhang et al. develop a device-based method to probe intrinsic exciton transport in photovoltaic cells. The broad utility of this method is demonstrated by measuring exciton transport for both luminescent and dark organic semiconductors as well as semiconductor quantum dots.

Porous flower-like superstructures based on self-assembled colloidal quantum dots for sensing

Quantum dots (QDs) have been envisaged as very promising materials for the development of advanced optical sensors. Here we report a new highly porous luminescent material based on colloidal QDs for potential applications in optical sensing devices. Bulk flower-like porous structures with sizes of hundreds of microns have been produced by slow destabilization of QD solution in the presence of a non-solvent vapor. The porous highly luminescent material was formed from CdSe QDs using the approach of non-solvent destabilization. This material demonstrated a 4-fold decrease in PL signal in the presence of the ammonia vapor. The relationship between the destabilization rate of QDs in solution and the resulting morphology of structural elements has been established. The proposed model of bulk porous flower-like nanostructured material fabrication can be applied to nanoparticles of different nature combining their unique properties. This research opens up a new approach to design novel multi-component composite materials enabling potential performance improvements of various photonic devices.

Recent development in biodegradable nanovehicle delivery system-assisted immunotherapy

A schematic illustration of BNDS biodegradation and release antigen delivery for assisting immunotherapy.

Tailoring exciton and excimer emission in an exfoliated ultrathin 2D metal-organic framework

Two-dimensional (2D) metal-organic frameworks have exhibited a range of fascinating attributes, of interest to numerous fields. Here, a calcium-based metal-organic framework with a 2D layered structure has been designed. Dual emissions relating to intralayer excimers and interlayer trapped excitons are produced, showing excitation-dependent shifting tendency, characteristic of a low dimensional semiconductor nature. Furthermore, the layer stacking by weak van der Waals forces among dynamically coordinated DMF molecules enables exfoliation and morphology transformation, which can be achieved by ultrasound in different ratios of DMF/H₂O solvents, or grinding under appropriate humidity conditions, leading to nano samples including ultrathin nanosheets with single or few coordination layers. The cutting down of layer numbers engenders suppression of interlayer exciton-related emission, resulting in modulation of the overall emitting color and optical memory states. This provides a rare prototypical model with switchable dual-channel emissions based on 2D-MOFs, in which the interlayer excitation channel can be reversibly tuned on/off by top-down exfoliation and morphology transformation.

Response to Comment "On the Existence of Excitonic Signatures in the Optical Response of Metal-Organic Frameworks"

This is a response to a comment on the interpretation of the origin of the nonlinear changes of optical properties of van der Waals' metal-organic frameworks (MOFs). The concerns are addressed by clarifying potential pitfalls in density functional theory (DFT) simulations, careful analysis of prior literature, and additionally discussing the previous experimental results to emphasize the applicability of the excitonic concept in molecular crystals, such as MOFs.

On the Existence of Excitonic Signatures in the Optical Response of Metal-Organic Frameworks: Comment on "van der Waals Metal-Organic Framework as an Excitonic Material for Advanced Photonics"

In a recent experimental paper, it was claimed that pronounced excitonic signatures are observed in optical response of Zn-based metal-organic frameworks (MOFs) at room temperature. Performing ab initio modelling, it is demonstrated that an alternative interpretation based on single-electron optical transitions between narrow π-bands in the system of aromatic rings of the ligand is far more plausible. Although these results do not rule the possibility of exciton formation in MOFs out completely, they show that extreme caution should be taken in attributing the features in photoabsorption spectra alone to excitons, and additional proof, such as data on long-distance energy transfer, is necessary.