Self-Adapting Wettability of ReS2 under a Constant Stimulus

Atomic engineering of two-dimensional materials via liquid metals

Two-dimensional (2D) materials, known for their distinctive electronic, mechanical, and thermal properties, have attracted considerable attention. The precise atomic-scale synthesis of 2D materials opens up new frontiers in nanotechnology, presenting novel opportunities for material design and property control but remains challenging due to the high expense of single-crystal solid metal catalysts. Liquid metals, with their fluidity, ductility, dynamic surface, and isotropy, have significantly enhanced the catalytic processes crucial for synthesizing 2D materials, including decomposition, diffusion, and nucleation, thus presenting an unprecedented precise control over material structures and properties. Besides, the emergence of liquid alloy makes the creation of diverse heterostructures possible, offering a new dimension for atomic engineering. Significant achievements have been made in this field encompassing defect-free preparation, large-area self-aligned array, phase engineering, heterostructures, etc. This review systematically summarizes these contributions from the aspects of fundamental synthesis methods, liquid catalyst selection, resulting 2D materials, and atomic engineering. Moreover, the review sheds light on the outlook and challenges in this evolving field, providing a valuable resource for deeply understanding this field. The emergence of liquid metals has undoubtedly revolutionized the traditional nanotechnology for preparing 2D materials on solid metal catalysts, offering flexible possibilities for the advancement of next-generation electronics.

Defective ReS2 Triggers High Intrinsic Piezoelectricity for Piezo-Photocatalytic Efficient Sterilization

Rhenium disulfide (ReS2) is a promising piezoelectric catalyst due to its excellent electron transfer ability and abundant unsaturated sites. The 1T' phase structure leads to the evolution of ReS2 into a centrosymmetric spatial structure, which restricts its application in piezoelectric catalysis. Herein, we propose a controllable defect engineering strategy to trigger the piezoelectric response of ReS2. The introduction of vacancy defects disrupts the initial centrosymmetric structure, which breaks the piezoelectric polarization bond and generates piezoelectric properties. By using transmission electron microscopy, we characterized it at the atomic scale and determined that vacancy defects contribute to an excellent piezoelectric property through first-principles calculations. Notably, the piezoelectric coefficient of the catalyst with 40 s-etching (ReS2@C-40) is 23.07 pm/V, an order of magnitude greater than other transition metal dichalcogenides. It demonstrated the feasibility of optimizing piezoelectric properties by increasing the conformational asymmetry. Based on its remarkable piezoelectric activity, ReS2@C-40 exhibits highly efficient piezo-photocatalytic synergistic sterilization performance with 99.99% eradication of Escherichia coli and 96.67% of Staphylococcus aureus within 30 min. This pioneering research on the coupling effect of ReS2 in piezoelectric catalysis and photocatalysis provides ideas for the development of piezo-photocatalysts and efficient water purification technologies.

Porous Electrospun Films with Reversible Photoresponsive Microenvironmental Humidity Regulation: A Controllable Hydrogen-Bonding Synergistic Effect Exhibited by Acrylic Acid Segments

Suitable relative humidity is essential for the preservation of cultural relics, food storage, and so on. A special material that can regulate the relative humidity in the microenvironment is particularly important. In this work, several innovative electrospun films with reversible photoresponsive wettability and the ability to regulate microenvironmental relative humidity were prepared. The spiropyran unit of the synthesized copolymer played the most important role in humidity regulation due to its reversible transition between a nonpolar ring-closed state and a polar ring-opened state induced by alternating ultraviolet/visible illumination. More interestingly, the introduction of acrylic acid segments exhibited a controllable hydrogen bond synergistic effect for increasing the range of humidity regulation. The color change and the reversible change ranges of wettability and microenvironmental relative humidity under ultraviolet/visible irradiation are all closely related to the number of acrylic acid segments. Cassie theory, density functional theory (DFT), and interaction region indicator (IRI) analysis were used to characterize this phenomenon. Electrospinning is a promising method to achieve large-scale production that can put such material into practical applications.

Robust Superhydrophobic Surfaces via the Sand-In Method

Superhydrophobic surfaces have gained sustained attention because of their extensive applications in the fields of self-cleaning, anti-icing, and drag reduction systems. Water droplets must have large apparent contact angle (CA) (>150°) and small CA hysteresis (<10°) on these surfaces. However, previous research usually involves complex fabrication strategies to modify the surface wettability. It is also challenging to maintain the temporal and mechanical stability of the delicate surface textures. Here, we develop a one-step solvent-free sand-in method to fabricate robust superhydrophobic surfaces directly atop various substrates with an apparent CA up to ∼163.8° and hysteresis less than 5°. The water repellency can withstand 100 Scotch tape peeling tests and remain stable after being stored under ambient humid conditions in Houston, Texas, for 18 months or being heated at 130 °C in air for 24 h. The superhydrophobic surfaces have excellent anti-icing ability, including a ∼2.6× longer water freezing time and ∼40% smaller ice adhesion strength with the temperature as low as -35 °C. Since the surface layers are fabricated by sanding the substrates with the powder additives, the surface damage can be repaired by a direct re-sanding treatment with the same powder additives. Further sand-in condition screenings broaden surface wettability from hydrophilic to superhydrophobic. The sand-in method induces the surface modification and the formation of the tribofilm. Surface and materials characterizations reveal that both microstructures and nanoscale asperities of the tribofilms contribute to the robust superhydrophobic features of sanded surfaces.

2D Re-Based Transition Metal Chalcogenides: Progress, Challenges, and Opportunities

The rise of 2D transition-metal dichalcogenides (TMDs) materials has enormous implications for the scientific community and beyond. Among TMDs, ReX2 (X = S, Se) has attracted significant interest regarding its unusual 1T' structure and extraordinary properties in various fields during the past 7 years. For instance, ReX2 possesses large bandgaps (ReSe2: 1.3 eV, ReS2: 1.6 eV), distinctive interlayer decoupling, and strong anisotropic properties, which endow more degree of freedom for constructing novel optoelectronic, logic circuit, and sensor devices. Moreover, facile ion intercalation, abundant active sites, together with stable 1T' structure enable them great perspective to fabricate high-performance catalysts and advanced energy storage devices. In this review, the structural features, fundamental physicochemical properties, as well as all existing applications of Re-based TMDs materials are comprehensively introduced. Especially, the emerging synthesis strategies are critically analyzed and pay particular attention is paid to its growth mechanism with probing the assembly process of domain architectures. Finally, current challenges and future opportunities regarding the controlled preparation methods, property, and application exploration of Re-based TMDs are discussed.

The mechanism of the modulation of electronic anisotropy in two-dimensional ReS2

Although the anisotropy and strategies for the modulation of the anisotropy in ReS2 have been widely reported, a comprehensive study on the inherent electronic anisotropy of ReS2 is still absent to date; therefore, the mechanism of anisotropy evolution is ambiguous as well. In this study, we have conducted a systematic investigation on the evolution of electronic anisotropy in bilayer ReS2, under the modulation of charge doping levels and temperature. It is found that the adjustability of electronic anisotropy is largely attributed to the angle-dependent scattering from defects or vacancies at a low doping level. At a high doping level, in contrast, the inherent electronic anisotropy can be recovered by filling the traps to attenuate the influence of scattering. This work renders insights into the exploration of electronic anisotropy in 2D materials.