Hydrogen Evolution and Oxidation: Mechanistic Studies and Material Advances

Heterogeneous Ni-Boride/Phosphide Anchored Amorphous B-C Layer for Overall Water Electrocatalysis

The rational design of efficient and economical bifunctional electrocatalysts remained a challenge for overall water electrolysis. In this work, the Ni-boride/ phosphide particles anchored amorphous B-doped carbon layer with hierarchical porous characteristics in Ni foam (Ni3P/Ni3B/B-C/NF) was fabricated for overall water splitting. The Boroncarbide (B4C) power was filled and fixed in the NF interspace through the electroplating and electroless plating, and then annealed in vacuum high temperature. The amorphous B-C layer derived from the B4 C not only speeded up the electron transport, but also cooperate with Ni-boride/phosphide to enhance the electrocatalytic activity for HER and OER synergistically. Furthermore, the hierarchical porous architecture of Ni3P/Ni3B/B-C/NF increased space utilization to load more active materials. The self-supported Ni3P/Ni3B/B-C/NF electrode possessed a low overpotential of 212 and 280 mV to deliver 100 mA cm-2 for HER and OER, respectively, and high stability for 48 h. In particular, the electrolyzer constituted with the Ni3P/Ni3B/B-C/NF bifunctional electrocatalyst only required a voltage of 1.59 V at 50 mA cm-2 for water electrocatalysis under alkaline medium, and demonstrated long-term stability for 48 h. This study provides a new technical path for the development of bifunctional of transition metal borides to promote the application of hydrogen production from water splitting.

Revisiting the activity origin of the PtAu24(SR)18 nanocluster for enhanced electrocatalytic hydrogen evolution by combining first-principles simulations with the experimental in situ FTIR technique

Thiolate-protected metal nanoclusters (NCs) have been widely used in various electrocatalytic reactions, yet the dynamic evolution of metal NCs during electrocatalysis has been rarely explored and the activity origin remains largely ambiguous. Herein, using a PtAu24(SCH3)18 NC as a prototype model, we combined advanced first-principles calculations and attenuated total reflection surface-enhanced infrared spectroscopy (ATR-SEIRAS) to re-examine its active site and reaction dynamics in the hydrogen evolution reaction (HER). It has been previously assumed that the central Pt is the only catalytic center. However, differently, we observed the spontaneous desorption of thiolate ligands under moderate potential, and the dethiolated PtAu24 exhibits excellent HER activity, which is contributed not only by the central Pt atom but also by the exposed bridged Au sites. Particularly, the exposed Au exhibits high activity even comparable to Pt, and the synergistic effect between them makes dethiolated PtAu24 an extraordinary HER electrocatalyst, even surpassing the commercial Pt/C catalyst. Our predictions are further verified by electrochemical activation experiments and in situ FTIR (ATR-SEIRAS) characterization, where evident adsorption of Au-H* and Pt-H* bonds is monitored. This work detected, for the first time, the Au-S interfacial dynamics of the PtAu24 nanocluster in electrocatalytic processes, and quantitatively evaluated the essential catalytic role of the exposed Au sites that has been largely overlooked in previous studies.

Complementary Multisite Turnover Catalysis toward Superefficient Bifunctional Seawater Splitting at Ampere-Level Current Density

The utilization of seawater for hydrogen production via water splitting is increasingly recognized as a promising avenue for the future. The key dilemma for seawater electrolysis is the incompatibility of superior hydrogen- and oxygen-evolving activities at ampere-scale current densities for both cathodic and anodic catalysts, thus leading to large electric power consumption of overall seawater splitting. Here, in situ construction of Fe4N/Co3N/MoO2 heterostructure arrays anchoring on metallic nickel nitride surface with multilevel collaborative catalytic interfaces and abundant multifunctional metal sites is reported, which serves as a robust bifunctional catalyst for alkaline freshwater/seawater splitting at ampere-level current density. Operando Raman and X-ray photoelectron spectroscopic studies combined with density functional theory calculations corroborate that Mo and Co/Fe sites situated on the Fe4N/Co3N/MoO2 multilevel interfaces optimize the reaction pathway and coordination environment to enhance water adsorption/dissociation, hydrogen adsorption, and oxygen-containing intermediate adsorption, thus cooperatively expediting hydrogen/oxygen evolution reactions in base. Inspiringly, this electrocatalyst can substantially ameliorate overall freshwater/seawater splitting at 1000 mA cm-2 with low cell voltages of 1.65/1.69 V, along with superb long-term stability at 500-1500 mA cm-2 for over 200 h, outperforming nearly all the ever-reported non-noble electrocatalysts for freshwater/seawater electrolysis. This work offers a viable approach to design high-performance bifunctional catalysts for seawater splitting.

Surficial Reconstruction of Pt-Ni/NiS and Its Effect on Electrocatalytic Hydrogen Evolution in Alkaline Medium

Cyclic voltammetry pretreatment of Pt-based electrocatalysts has been proven to be a normal activation process on achieving the optimal alkaline hydrogen evolution performance. Until now, the congruent relationship between the microstructural evolution and performance improvement during this process has rarely been reported. Herein, when the in situ transmission electron microscopy and in situ Raman analyses are employed, a self-reconstruction process from crystalline NiS into amorphous nickel hydroxide hydrate [Ni(OH)2-x·H2O, where x ≈ 0.3] on the surface of platinum-nickel nanowires has first been captured, which is the critical water dissociation active site to offer a sufficient proton supply. Furthermore, such a surficial reconstruction triggers an increase in the current density from -2.3 to -38.8 mA/cm2 (at -70 mV), which is nearly 17 times. These observations point to the fact that it is essential to consider the fundamental mechanisms of hydrogen evolution on the active sites when the process is scaled up.

Towards bridging thermo/electrocatalytic CO oxidation: from nanoparticles to single atoms

Proton exchange membrane fuel cells (PEMFCs), as a feasible alternative to replace the traditional fossil fuel-based energy converter, contribute significantly to the global sustainability agenda. At the PEMFC anode, given the high exchange current density, Pt/C is deemed the catalyst-of-choice to ensure that the hydrogen oxidation reaction (HOR) occurs at a sufficiently fast pace. The high performance of Pt/C, however, can only be achieved under the premise that high purity hydrogen is used. For instance, in the presence of trace level carbon monoxide, a typical contaminant during H2 production, Pt is severely deactivated by CO surface blockage. Addressing the poisoning issue necessitates for either developing anti-poisoning electrocatalysts or using pre-purified H2 obtained via a thermo-catalysis route. In other words, the CO poisoning issue can be addressed by either thermal-catalysis from the H2 supply side or electrocatalysis at the user side, respectively. In spite of the distinction between thermo-catalysis and electro-catalysis, there are high similarities between the two routes. Essentially, a reduction in the kinetic barrier for the combination of CO to oxygen containing intermediates is required in both techniques. Therefore, bridging electrocatalysis and thermocatalysis might offer new insight into the development of cutting edge catalysts to solve the poisoning issue, which, however, stands as an underexplored frontier in catalysis science. This review provides a critical appraisal of the recent advancements in preferential CO oxidation (CO-PROX) thermocatalysts and anti-poisoning HOR electrocatalysts, aiming to bridge the gap in cognition between the two routes. First, we discuss the differences in thermal/electrocatalysis, CO oxidation mechanisms, and anti-CO poisoning strategies. Second, we comprehensively summarize the progress of supported and unsupported CO-tolerant catalysts based on the timeline of development (nanoparticles to clusters to single atoms), focusing on metal-support interactions and interface reactivity. Third, we elucidate the stability issue and theoretical understanding of CO-tolerant electrocatalysts, which are critical factors for the rational design of high-performance catalysts. Finally, we underscore the imminent challenges in bridging thermal/electrocatalytic CO oxidation, with theory, materials, and the mechanism as the three main weapons to gain a more in-depth understanding. We anticipate that this review will contribute to the cognition of both thermocatalysis and electrocatalysis.

Synergistic Modulation of Multiple Sites Boosts Anti-Poisoning Hydrogen Electrooxidation Reaction with Ultrasmall (Pt0.9Rh0.1)3V Ternary Intermetallic Nanoparticles

Promoting the hydrogen oxidation reaction (HOR) activity and poisoning tolerance of electrocatalysts is crucial for the large-scale application of hydrogen-oxygen fuel cell. However, it is severely hindered by the scaling relations among different intermediates. Herein, lattice-contracted Pt-Rh in ultrasmall ternary L12-(Pt0.9Rh0.1)3V intermetallic nanoparticles (~2.2 nm) were fabricated to promote the HOR performances through an oxides self-confined growth strategy. The prepared (Pt0.9Rh0.1)3V displayed 5.5/3.7 times promotion in HOR mass/specific activity than Pt/C in pure H2 and dramatically limited activity attenuation in 1000 ppm CO/H2 mixture. In situ Raman spectra tracked the superior anti-CO* capability as a result of compressive strained Pt, and the adsorption of oxygen-containing species was promoted due to the dual-functional effect. Further assisted by density functional theory calculations, both the adsorption of H* and CO* on (Pt0.9Rh0.1)3V were reduced compared with that of Pt due to lattice contraction, while the adsorption of OH* was enhanced by introducing oxyphilic Rh sites. This work provides an effective tactic to stimulate the electrocatalytic performances by optimizing the adsorption of different intermediates severally.

Ultrastable monolithic electrodes with single-atom platinum-oxygen sites for efficient hydrogen evolution in acidic conditions

PtNC single-atom catalysts (SACs) single-atom catalysts (SACs) are promising for acidic hydrogen evolution reaction (HER) but suffer from instability at high current densities, limiting their large-scale application. Herein, PtO bonds are constructed to securely anchor atomically dispersed Pt for single-atom (SA) catalysis, utilizing etched vertical graphene (EVG) nanosheets as monolithic supports (Pt-SAs/EVG). Compared to PtNC, the resultant PtO4 coordination demonstrates improved stability while maintaining significant catalytic activity. When applying this catalyst in the acidic HER, a high turnover frequency (34.6 s-1) is achieved at 70 mV, accompanied by exceptional durability exceeding 100 h at -100 mA cm-2. Theoretical analyses indicate that the PtO bonds confer stability to the Pt atoms, facilitating the efficient adsorption of protons and the subsequent desorption of hydrogen. The prepared Pt-SAs/EVG can also be directly employed as the cathode to afford stable operation at 0.5 A cm-2 in a proton exchange membrane electrolyzer cell. This study offers novel insights into enhancing the performance of SACs for industrial applications in electrocatalysis.

Recent Advancements in Ascribing Several Platinum Free Electrocatalysts Pertinent to Hydrogen Evolution from Water Reduction

The advancement of a sustainable and scalable catalyst for hydrogen production is crucial for the future of the hydrogen economy. Electrochemical water splitting stands out as a promising pathway for sustainable hydrogen production. However, the development of Pt-free electrocatalysts that match the energy efficiency of Pt while remaining economical poses a significant challenge. This review addresses this challenge by highlighting latest breakthroughs in Pt-free catalysts for the hydrogen evolution reaction (HER). Specifically, we delve into the catalytic performance of various transition metal phosphides, metal carbides, metal sulphides, and metal nitrides toward HER. Our discussion emphasizes strategies for enhancing catalytic performance and explores the relationship between structural composition and the performance of different electrocatalysts. Through this comprehensive review, we aim to provide insights into the ongoing efforts to overcome barriers to scalable hydrogen production and pave the way for a sustainable hydrogen economy.

P-Bridging Asymmetry Diatomic Catalysts Sites Drive Efficient Bifunctional Oxygen Electrocatalysis for Zinc-Air Batteries

Rechargeable zinc-air batteries (ZABs) rely on the development of high-performance bifunctional oxygen electrocatalysts to facilitate efficient oxygen reduction/evolution reactions (ORR/OER). Single-atom catalysts (SACs), characterized by their precisely defined active sites, have great potential for applications in ZABs. However, the design and architecture of atomic site electrocatalysts with both high activity and durability present significant challenges, owing to their spatial confinement and electronic states. In this study, a strategy is proposed to fabricate structurally uniform dual single-atom electrocatalyst (denoted as P-FeCo/NC) consisting of P-bridging Fe and Co bimetal atom (i.e., Fe-P-Co) decorated on N, P-co-doped carbon framework as an efficient and durable bifunctional electrocatalyst for ZABs. Experimental investigations and theoretical calculations reveal that the Fe-P-Co bridge-coupling structure enables a facile adsorption/desorption of oxygen intermediates and low activation barrier. The resultant P-FeCo/NC exhibits ultralow overpotential of 340 mV at 10 mA cm-2 for OER and high half-wave potential of 0.95 V for ORR. In addition, the application of P-FeCo/NC in rechargeable ZABs demonstrates enhanced performance with maximum power density of 115 mW cm-2 and long cyclic stability, which surpass Pt/C and RuO2 catalysts. This study provides valuable insights into the design and mechanism of atomically dispersed catalysts for energy conversion applications.

Ultralow-Loading Ruthenium-Iridium Fuel Cell Catalysts Dispersed on Zn-N Species-Doped Carbon

Developing low-loading platinum-group-metal (PGM) catalysts is one of the key challenges in commercializing anion-exchange-membrane-fuel-cells (AEMFCs), especially for hydrogen oxidation reaction (HOR). Here, ruthenium-iridium nanoparticles being deposited on a Zn-N species-doped carbon carrier (Ru6Ir/Zn-N-C) are synthesized and used as an anodic catalyst for AEMFCs. Ru6Ir/Zn-N-C shows extremely high mass activity (5.87 A mgPGM -1) and exchange current density (0.92 mA cm-2), which is 15.1 and 3.9 times that of commercial Pt/C, respectively. Based on the Ru6Ir/Zn-N-C AEMFCs achieve a peak power density of 1.50 W cm-2, surpassing the state-of-the-art commercial PtRu catalysts and the power ratio of the normalized loading is 14.01 W mgPGM anode -1 or 5.89 W mgPGM -1 after decreasing the anode loading (87.49 µg cm-2) or the total PGM loading (0.111 mg cm-2), satisfying the US Department of Energy's PGM loading target. Moreover, the solvent and solute isotope separation method is used for the first time to reveal the kinetic process of HOR, which shows the reaction is influenced by the adsorption of H2O and OH-. The improvement of the hydrogen bond network connectivity of the electric double layer by adjusting the interfacial H2O structure together with the optimized HBE and OHBE is proposed to be responsible for the high HOR activity of Ru6Ir/Zn-N-C.

Lattice Strain with Stabilized Oxygen Vacancies Boosts Ceria for Robust Alkaline Hydrogen Evolution Outperforming Benchmark Pt

Earth-abundant metal oxides are usually considered as stable but catalytically inert toward hydrogen evolution reaction (HER) due to their unfavorable hydrogen intermediate adsorption performance. Herein, a heavy rare earth (Y) and transition metal (Co) dual-doping induced lattice strain and oxygen vacancy stabilization strategy is proposed to boost CeO2 toward robust alkaline HER. The induced lattice compression and increased oxygen vacancy (Ov) concentration in CeO2 synergistically improve the water dissociation on Ov sites and sequential hydrogen adsorption at activated Ov-neighboring sites, leading to significantly enhanced HER kinetics. Meanwhile, Y doping offers stabilization effect on Ov by its stronger Y─O bonding over Ce─O, which endows the catalyst with excellent stability. The Y,Co-CeO2 electrocatalyst exhibits an ultra-low HER overpotential (27 mV at 10 mA cm-2) and Tafel slope (48 mV dec-1), outperforming the benchmark Pt electrocatalyst. Moreover, the anion exchange membrane water electrolyzer incorporated with Y,Co-CeO2 achieves excellent stability of 500 h under 600 mA cm-2. This synergistic lattice strain and oxygen vacancy stabilization strategy sheds new light on the rational development of efficient and stable oxide-based HER electrocatalysts.

Island-in-Sea Structured Pt3Fe Nanoparticles-in-Fe Single Atoms Loaded in Carbon Materials as Superior Electrocatalysts toward Alkaline HER and Acidic ORR

In this work, Pt3Fe nanoparticles (Pt3Fe NPs) with the ordered internal structure and Pt-rich shells surrounded by plenty of Fe single atoms (Fe SAs) as active species (Pt3Fe NP-in-Fe SA) loaded in the carbon materials are successfully fabricated, which are abbreviated as island-in-sea structured (IISS) Pt3Fe NP-in-Fe SA catalysts. Moreover, the synergistic effect of O-bridging between Pt3Fe NPs and Fe SAs, and the ordered internal structured Pt3Fe NPs with Pt-rich shells of an optimal thickness contributes to the achievement of the local acidic environments on the surfaces of Pt3Fe NPs in the alkaline hydrogen evolution reaction (HER) and the enhancement of the desorption rate of *OH intermediate in the acidic oxygen reduction reaction (ORR). In addition, the electronic interactions between Pt3Fe NPs and dispersed Fe SAs cannot only provide efficient electrons transfer, but also prevent the aggregation and dissolution of Pt3Fe NPs. Furthermore, the overpotential and the half wave potential of the as-prepared IISS Pt3Fe NP-in-Fe SA catalysts toward the alkaline HER and toward the acidic ORR are 8 mV at a current density of 10 mA cm-2 and 0.933 V, respectively, which is 29 lower and 86 mV higher than those (37 mV and 0.847 V) of commercial Pt/C catalysts.

Dual-Intermetallic Heterostructure on Hierarchical Nanoporous Metal for Highly Efficient Alkaline Hydrogen Electrocatalysis

Constructing well-defined active multisites is an effective strategy to break linear scaling relationships to develop high-efficiency catalysts toward multiple-intermediate reactions. Here, dual-intermetallic heterostructure composed of tungsten-bridged Co3W and WNi4 intermetallic compounds seamlessly integrated on hierarchical nanoporous nickel skeleton is reported as a high-performance nonprecious electrocatalyst for alkaline hydrogen evolution and oxidation reactions. By virtue of interfacial tungsten atoms configuring contiguous multisites with proper adsorptions of hydrogen and hydroxyl intermediates to accelerate water dissociation/combination and column-nanostructured nickel skeleton facilitating electron and ion/molecule transportations, nanoporous nickel-supported Co3W-WNi4 heterostructure exhibits exceptional hydrogen electrocatalysis in alkaline media, with outstanding durability and impressive catalytic activities for hydrogen oxidation reaction (geometric exchange current density of ≈6.62 mA cm-2) and hydrogen evolution reaction (current density of ≈1.45 A cm-2 at overpotential of 200 mV). Such atom-ordered intermetallic heterostructure alternative to platinum group metals shows genuine potential for hydrogen production and utilization in hydroxide-exchange-membrane water electrolyzers and fuel cells.

Highly Efficient Acidic Electrosynthesis of Hydrogen Peroxide at Industrial-Level Current Densities Promoted by Alkali Metal Cations

Acidic H2O2 synthesis through electrocatalytic 2e- oxygen reduction presents a sustainable alternative to the energy-intensive anthraquinone oxidation technology. Nevertheless, acidic H2O2 electrosynthesis suffers from low H2O2 Faradaic efficiencies primarily due to the competing reactions of 4e- oxygen reduction to H2O and hydrogen evolution in environments with high H+ concentrations. Here, we demonstrate the significant effect of alkali metal cations, acting as competing ions with H+, in promoting acidic H2O2 electrosynthesis at industrial-level currents, resulting in an effective current densities of 50-421 mA cm-2 with 84-100 % Faradaic efficiency and a production rate of 856-7842 μmol cm-2 h-1 that far exceeds the performance observed in pure acidic electrolytes or low-current electrolysis. Finite-element simulations indicate that high interfacial pH near the electrode surface formed at high currents is crucial for activating the promotional effect of K+. In situ attenuated total reflection Fourier transform infrared spectroscopy and ab initio molecular dynamics simulations reveal the central role of alkali metal cations in stabilizing the key *OOH intermediate to suppress 4e- oxygen reduction through interacting with coordinated H2O.

Ultralow Catalytic Loading for Optimised Electrocatalytic Performance of AuPt Nanoparticles to Produce Hydrogen and Ammonia

The hydrogen evolution and nitrite reduction reactions are key to producing green hydrogen and ammonia. Antenna-reactor nanoparticles hold promise to improve the performances of these transformations under visible-light excitation, by combining plasmonic and catalytic materials. However, current materials involve compromising either on the catalytic activity or the plasmonic enhancement and also lack control of reaction selectivity. Here, we demonstrate that ultralow loadings and non-uniform surface segregation of the catalytic component optimize catalytic activity and selectivity under visible-light irradiation. Taking Pt-Au as an example we find that fine-tuning the Pt content produces a 6-fold increase in the hydrogen evolution compared to commercial Pt/C as well as a 6.5-fold increase in the nitrite reduction and a 2.5-fold increase in the selectivity for producing ammonia under visible light excitation relative to dark conditions. Density functional theory suggests that the catalytic reactions are accelerated by the intimate contact between nanoscale Pt-rich and Au-rich regions at the surface, which facilitates the formation of electron-rich hot-carrier puddles associated with the Pt-based active sites. The results provide exciting opportunities to design new materials with improved photocatalytic performance for sustainable energy applications.

Hydrogen Electrode Reactions in Energy-Related Electrocatalysis Systems

Hydrogen electrode reactions, including hydrogen evolution reactions and hydrogen oxidation reactions, are fundamental and crucial within aqueous electrochemistry. Particularly in energy-related electrocatalysis processes, there is a consistent involvement of hydrogen-related electrochemical processes, underscoring the need for in-depth study. This review encompasses significant reports, delving into elementary steps and reaction mechanisms of hydrogen electrode reactions, as well as catalyst design strategies. In addition, we focus on the application of hydrogen electrode reaction mechanism in different energy-related electrocatalytic reactions, and the significance of the promotion and suppression of reaction kinetics in different reaction systems. It thoroughly elucidated the significance of these reactions and the need for a deeper understanding, offering a novel perspective for the future development of this field.

Multidimensional Electrochemistry Decodes the Operando Mechanism of Hydrogen Oxidation

Being an efficient approach to the utilization of hydrogen energy, the hydrogen oxidation reaction (HOR) is of particular significance in the current carbon-neutrality time. Yet the mechanistic picture of the HOR is still blurred, mostly because the elemental steps of this reaction are rapid and highly entangled, especially when deviating from the thermodynamic equilibrium state. Here we report a strategy for decoding the HOR mechanism under operando conditions. In addition to the wide-potential-range I-V curves obtained using gas diffusion electrodes, we have applied the AC impedance spectroscopy to provide independent and complementary kinetic information. Combining multidimensional data sources has enabled us to fit, in mathematical rigor, the core kinetic parameter set in a 5-D data space. The reaction rate of the three elemental steps (Tafel, Heyrovsky, and Volmer reactions), as a function of the overpotential, can thus be distilled individually. Such an undocumented kinetic picture unravels, in detail, how the HOR is controlled by the elemental steps on polarization. For instance, at low polarization region, the Heyrovsky reaction is relatively slow and can be ignored; but at high polarization region, the Heyrovsky reaction will surpass the Tafel reaction. Additionally, the Volmer reaction has been the fastest within overpotentials of interest. Our findings not only offer a better understanding of the HOR mechanism, but also lay the foundation for the development of improved hydrogen energy utilization systems.

Ruthenium-doped Ni(OH)2 to enhance the activity of methanol oxidation reaction and promote the efficiency of hydrogen production

The coupling of the hydrogen evolution reaction (HER) and methanol oxidation reaction (MOR) to produce clean hydrogen energy with value-added chemicals has attracted substantial attention. However, achieving high selectivity for formate production in the MOR and high faradaic efficiency for H2 evolution remain significant challenges. In light of this, this study constructs an Ru/Ni(OH)2/NF catalyst on nickel foam (NF) and evaluates its electrochemical performance in the MOR and HER under alkaline conditions. The results indicate that the synergistic effect of Ni(OH)2 and Ru can promote the catalytic activity. At an overpotential of only 42 mV, the current density for the HER reaches 10 mA cm-2. Moreover, in a KOH solution containing 1 M methanol, a potential of only 1.36 V vs. RHE is required to achieve an MOR current density of 10 mA cm-2. Using Ru/Ni(OH)2/NF as a bifunctional catalyst, employed as both the anode and cathode, an MOR-coupled HER electrolysis cell can achieve a current density of 10 mA cm-2 with a voltage of only 1.45 V. Importantly, the faradaic efficiency (FE) for the hydrogen production at the cathode and formate (HCOO-) production at the anode approaches 100%. Therefore, this study holds significant practical implications for the development of methanol electro-oxidation for formate-coupled water electrolysis hydrogen production technology.

Switch Volmer-Heyrovsky to Volmer-Tafel Pathway for Efficient Acidic Electrocatalytic Hydrogen Evolution by Correlating Pt Single Atoms with Clusters

As cost-effective catalysts, platinum (Pt) single-atom catalysts (SACs) have attracted substantial attention. However, most studies indicate that Pt SACs in acidic hydrogen evolution reaction (HER) follow the slow Volmer-Heyrovsky (VH) mechanism instead of the fast kinetic Volmer-Tafel (VT) pathway. Here, this work propose that the VH mechanism in Pt SACs can be switched to the faster VT pathway for efficient HER by correlating Pt single atoms (SAs) with Pt clusters (Cs). Our calculations reveal that the correlation between Pt SAs and Cs significantly impacts the electronic structure of exposed Pt atoms, lowering the adsorption barrier for atomic hydrogen and enabling a faster VT mechanism. To validate these findings, this work purposely synthesize three catalysts: l-Pt@MoS2, m-Pt@MoS2 and h-Pt@MoS2 with low, moderate, and high Pt-loading, having different distributions of Pt SAs and Cs. The m-Pt@MoS2 catalyst with properly correlating Pt SAs and Cs exhibits outstanding performance with an overpotential of 47 mV and Tafel slope of 32 mV dec-1. Further analysis of the Tafel values confirms that the m-Pt@MoS2 sample indeed follows the VT reaction mechanism, aligning with the theoretical findings. This study offers a deep understanding of the synergistic mechanism, paving a way for designing novel-advanced catalysts.

Atomically dispersed Iridium on Mo2C as an efficient and stable alkaline hydrogen oxidation reaction catalyst

Hydroxide exchange membrane fuel cells (HEMFCs) have the advantages of using cost-effective materials, but hindered by the sluggish anodic hydrogen oxidation reaction (HOR) kinetics. Here, we report an atomically dispersed Ir on Mo2C nanoparticles supported on carbon (IrSA-Mo2C/C) as highly active and stable HOR catalysts. The specific exchange current density of IrSA-Mo2C/C is 4.1 mA cm-2ECSA, which is 10 times that of Ir/C. Negligible decay is observed after 30,000-cycle accelerated stability test. Theoretical calculations suggest the high HOR activity is attributed to the unique Mo2C substrate, which makes the Ir sites with optimized H binding and also provides enhanced OH binding sites. By using a low loading (0.05 mgIr cm-2) of IrSA-Mo2C/C as anode, the fabricated HEMFC can deliver a high peak power density of 1.64 W cm-2. This work illustrates that atomically dispersed precious metal on carbides may be a promising strategy for high performance HEMFCs.

Atomic Molybdenum Nanomaterials for Electrocatalysis

As a sustainable energy technology, electrocatalytic energy conversion requires electrocatalysts, which greatly motivates the exploitation of high-performance electrocatalysts based on nonprecious metals. Molybdenum-based nanomaterials have demonstrated promise as electrocatalysts because of their unique physiochemical and electronic properties. Among them, atomic Mo catalysts, also called Mo-based single-atom catalysts (Mo-SACs), have the most accessible active sites and tunable microenvironments and are thrivingly explored in various electrochemical conversion reactions. A timely review of such rapidly developing topics is necessary to provide guidance for further exploration of optimized Mo-SACs toward electrochemical energy technologies. In this review, recent advances in the synthetic strategies for Mo-SACs are highlighted, focusing on the microenvironment engineering of Mo atoms. Then, the representative achievements of their applications in various electrocatalytic reactions involving the N2, H2O, and CO2 cycles are summarized by combining experimental and computational results. Finally, prospects for the future development of Mo-SACs in electrocatalysis are provided and the key challenges that require further investigation and optimization are highlighted.

Precious Metal Free Hydrogen Evolution Catalyst Design and Application

The quest to identify precious metal free hydrogen evolution reaction catalysts has received unprecedented attention in the past decade. In this Review, we focus our attention to recent developments in precious metal free hydrogen evolution reactions in acidic and alkaline electrolyte owing to their relevance to commercial and near-commercial low-temperature electrolyzers. We provide a detailed review and critical analysis of catalyst activity and stability performance measurements and metrics commonly deployed in the literature, as well as review best practices for experimental measurements (both in half-cell three-electrode configurations and in two-electrode device testing). In particular, we discuss the transition from laboratory-scale hydrogen evolution reaction (HER) catalyst measurements to those in single cells, which is a critical aspect crucial for scaling up from laboratory to industrial settings but often overlooked. Furthermore, we review the numerous catalyst design strategies deployed across the precious metal free HER literature. Subsequently, we showcase some of the most commonly investigated families of precious metal free HER catalysts; molybdenum disulfide-based, transition metal phosphides, and transition metal carbides for acidic electrolyte; nickel molybdenum and transition metal phosphides for alkaline. This includes a comprehensive analysis comparing the HER activity between several families of materials highlighting the recent stagnation with regards to enhancing the intrinsic activity of precious metal free hydrogen evolution reaction catalysts. Finally, we summarize future directions and provide recommendations for the field in this area of electrocatalysis.

Activating and Identifying the Active Site of RuS2 for Alkaline Hydrogen Oxidation Electrocatalysis

Searching for highly efficient and economical electrocatalysts for alkaline hydrogen oxidation reaction (HOR) is crucial for the development of alkaline polymer membrane fuel cells. Here, we report a valid strategy to active pyrite-type RuS2 for alkaline HOR electrocatalysis by introducing sulfur vacancies. The obtained S-vacancies modified RuS2-x exhibits outperformed HOR activity with a current density of 0.676 mA cm-2 and mass activity of 1.43 mA μg-1, which are 15-fold and 40-fold improvement than those of Ru catalyst. In situ Raman spectra demonstrate the formation of S-H bond during the HOR process, identifying the S atom of RuS2-x is the real active site for HOR catalysis. Density functional theory calculations and experimental results including in situ surface-enhanced infrared absorption spectroscopy suggest the introduction of S vacancies can rationally modify the p orbital of S atoms, leading to enhanced binding strength between the S sites and H atoms on the surface of RuS2-x, together with the promoted connectivity of hydrogen-bonding network and lowered water formation energy, contributes to the enhanced HOR performance.

Electrifying Energy and Chemical Transformations with Single-Atom Alloy Nanoparticle Catalysts

Single-atom alloys (SAAs) have attracted considerable attention as promising electrocatalysts in reactions central to energy conversion and chemical transformation. In contrast to monometallic nanocrystals and metal alloys, SAAs possess unique and intriguing physicochemical properties, positioning them as ideal model systems for studying structure-property relationships. However, the field is still in its early stages. In this Perspective, we first review and summarize rational synthesis methods and advanced characterization techniques for SAA nanoparticle catalysts. We then emphasize the extensive applications of SAAs in a range of electrocatalytic reactions, including fuel cell reactions, water splitting, and carbon dioxide and nitrate reductions. Finally, we provide insights into existing challenges and prospects associated with the controlled synthesis, characterization, and design of SAA catalysts.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Ammonia-Induced FCC Ru Nanocrystals for Efficient Alkaline Hydrogen Electrocatalysis

The urgent development of effective electrocatalysts for hydrogen evolution and hydrogen oxidation reaction (HER/HOR) is needed due to the sluggish alkaline hydrogen electrocatalysis. Here, an unusual face-centered cubic (fcc) Ru nanocrystal with favorable HER/HOR performance is offered. Guided by the lower calculated surface energy of fcc Ru than that of hcp Ru in NH3, the carbon-supported fcc Ru electrocatalyst is facilely synthesized in the NH3 reducing atmosphere. The specific HOR kinetic current density of fcc Ru can reach 23.4 mA cmPGM -2, which is around 20 and 21 times greater than that of hexagonal close-packed (hcp) Ru and Pt/C, respectively. Additionally, the HER specific activity is enhanced more than six times in fcc Ru electrocatalyst when compared to Pt/C. Experimental and theoretical analysis indicate that the phase transition from hcp Ru to fcc Ru can negatively shift the d band center, weaken the interaction between catalysts and key intermediates and therefore enhances the HER/HOR kinetics.

Unraveling and Resolving the Inconsistencies in Tafel Analysis for Hydrogen Evolution Reactions

The Tafel slope represents a critical kinetic parameter for mechanistic studies of electrochemical reactions, including the hydrogen evolution reaction (HER). Linear fitting of the polarization curve in a N2-saturated electrolyte is commonly used to determine Tafel slopes, which is, however, frequently plagued with inconsistencies. Our systematic studies reveal that the Tafel slopes derived from this approach are loading- and potential-dependent, and could substantially exceed the theoretical limits. Our analyses indicate that this discrepancy is largely attributed to the locally trapped HER-generated H2 in the catalyst layer. A non-negligible hydrogen oxidation reaction (HOR) current more prominently offsets the HER current at the smaller HER overpotential regime, resulting in an artificially smaller Tafel slope. On the other hand, at the higher overpotential where the HOR current becomes negligible, the locally trapped H2 substantially suppresses further HER current growth, leading to an artificially larger Tafel slope. The Butler-Volmer method accounts for both the HER and HOR currents in the fitting, which offers a more reliable method for pure Pt catalysts but is less applicable to transition-metal decorated Pt surfaces with distinct HER/HOR kinetics. Our studies underscore the challenges in Tafel slope analysis and the need for strict controls for reliable comparisons among different catalyst systems.

Local reaction environment in electrocatalysis

Beyond conventional electrocatalyst engineering, recent studies have unveiled the effectiveness of manipulating the local reaction environment in enhancing the performance of electrocatalytic reactions. The general principles and strategies of local environmental engineering for different electrocatalytic processes have been extensively investigated. This review provides a critical appraisal of the recent advancements in local reaction environment engineering, aiming to comprehensively assess this emerging field. It presents the interactions among surface structure, ions distribution and local electric field in relation to the local reaction environment. Useful protocols such as the interfacial reactant concentration, mass transport rate, adsorption/desorption behaviors, and binding energy are in-depth discussed toward modifying the local reaction environment. Meanwhile, electrode physical structures and reaction cell configurations are viable optimization methods in engineering local reaction environments. In combination with operando investigation techniques, we conclude that rational modifications of the local reaction environment can significantly enhance various electrocatalytic processes by optimizing the thermodynamic and kinetic properties of the reaction interface. We also outline future research directions to attain a comprehensive understanding and effective modulation of the local reaction environment.

Alleviating the competitive adsorption of hydrogen and hydroxyl intermediates on Ru by d-p orbital hybridization for hydrogen electrooxidation

Strengthening the hydroxyl binding energy (OHBE) on Ru surfaces for efficient hydrogen oxidation reaction (HOR) in alkaline electrolytes at the expense of narrowing the effective potential window (EPW) increases the risk of passivation under transient conditions for the alkaline exchange membrane fuel cell technique. Herein, an effective Ru/NiSe2 catalyst was reported which exhibits a gradually enhanced intrinsic activity and slightly enlarged EPW with the increased degree of coupling between Ru and NiSe2. This promotion could be attributed to the optimized electron distribution and d-band structures of Ru surfaces weakening the hydrogen binding energy and especially the OHBE through the strong d-p orbital hybridization between Ru and NiSe2. Unlike the conventional way of strengthened OHBE enhancing the oxidative desorption of hydrogen intermediates (Had) via the bi-functional mechanism, the weakened OHBE on this Ru/NiSe2 model catalyst alleviates the competitive adsorption between Had and the hydroxyl intermediates (OHad), thereby accelerating the HOR kinetics at low overpotentials and hindering the full poisoning of the catalytic surfaces by strongly adsorbed OHad spectators at high overpotentials. The work reveals a missed but important approach for Ru-based catalyst development for the fuel cell technique.

An All-Climate Nonaqueous Hydrogen Gas-Proton Battery

Rechargeable hydrogen gas batteries, driven by hydrogen evolution and oxidation reactions (HER/HOR), are emerging grid-scale energy storage technologies owing to their low cost and superb cycle life. However, compared with aqueous electrolytes, the HER/HOR activities in nonaqueous electrolytes have rarely been studied. Here, for the first time, we develop a nonaqueous proton electrolyte (NAPE) for a high-performance hydrogen gas-proton battery for all-climate energy storage applications. The advanced nonaqueous hydrogen gas-proton battery (NAHPB) assembled with a representative V2(PO4)3 cathode and H2 anode in a NAPE exhibits a high discharge capacity of 165 mAh g-1 at 1 C at room temperature. It also efficiently operates under all-climate conditions (from -30 to +70 °C) with an excellent electrochemical performance. Our findings offer a new direction for designing nonaqueous proton batteries in a wide temperature range.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Cobalt phosphide/nickel-cobalt phosphide heterostructured hollow nanoflowers for high-performance supercapacitor and overall water splitting

In this work, a novel CoP/NiCoP heterostructure with hollow nanoflower morphology is designed and constructed. Benefiting from the hollow nanoflower morphology and tuned electronic structure, the heterostructured CoP/NiCoP hollow nanoflowers are demonstrated as both high-performance supercapacitor electrode materials and superior bifunctional electrocatalysts in overall water splitting. The CoP/NiCoP delivers a high capacitance of 1476.6 F g-1 at 1.0 A g-1 and shows enhanced rate capability. The constructed asymmetric supercapacitor achieves a high energy density of 32.4 Wh kg-1 at 800.5 W kg-1 and high power density of 16.5 kW kg-1 at 20.0 Wh kg-1. The CoP/NiCoP hollow nanoflowers are also proven to be remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalyst which achieves the current density of 10.0 mA cm-2 under an overpotential of 110.4 mV for HER and 310.7 mV for OER with superior stability in alkaline solution. In addition, the constructed CoP/NiCoP||CoP/NiCoP cell with CoP/NiCoP as both cathode material and anode material only requires 1.63 V @ 10.0 mA cm-2 for overall water splitting. This study sheds lights on the rational design and construction of bimetallic phosphides for both supercapacitor and overall water splitting.

Coupling effect and electronic modulation for synergistically enhanced overall alkaline water splitting on bifunctional Fe-doped CoBi/CoP nanoneedle arrays

Designing bifunctional electrocatalysts with high efficiency and low cost for water splitting is urgently required for the production of green hydrogen. Herein, a bifunctional iron-doped cobalt borate/cobalt phosphide hybrid supported on nickel foam (Fe-CoBi/CoP/NF) was fabricated via hydrothermal and phosphating process. Benefit from the unique nanoneedle architecture for faster mass transfer, the existence of borate on CoBi for accelerating proton transfer, the moderate adsorption of H* species on CoP, Fe doping and the synergistic effect between CoBi and CoP, Fe-CoBi/CoP/NF hybrid exhibits a low overpotential of 137 mV and 260 mV at 100 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Moreover, Fe-CoBi/CoP/NF||Fe-CoBi/CoP/NF also presents a low cell potential of 1.65 V@100 mA cm-2 for overall alkaline water splitting and excellent durability (128 h) without decay. This work provides a new insight into the design of bifunctional electrocatalysts simultaneously through the morphological engineering and heteroatomic doping.

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Ultrafine Pt-based catalyst decorated with oxygenophilic Ni-sites accelerating alkaline H2O dissociation for efficient hydrogen evolution

Although Pt is a widely adopted commercial catalyst for the hydrogen evolution reaction (HER), its practical application is greatly limited by its prohibitive cost and high energy barrier for H2O dissociation in alkaline media. Herein, an ultrafine Pt-based catalyst decorated with oxygenophilic Ni-sites is rationally designed and successfully synthesized with Pt5(GS)10 (HGS = l-reduced glutathione) nanocluster precursor. The optimized Ni-decorated Pt catalyst (Ni-Pt-C-500) with ultrafine nanoparticles (about 1.6 nm) exhibits a low overpotential (14.0 mV) at 10 mA cm-2 and a mild Tafel slope of 20.8 mV dec-1 in the HER, which is superior to its undecorated counterpart (Pt-C-500), the commercial 20 wt% Pt/C catalyst and most of the previously reported Pt-based electrocatalysts. Experimental observations and theoretical calculations indicate that H2O could be spontaneously adsorbed to Ni-sites of the Ni-Pt-C-500 catalyst. Mechanistic studies reveal that Ni-sites promote HER by accelerating the kinetic of H2O cleavage and optimizing the electronic structure of Pt. This work paves a new avenue for designing other ultrafine hybrid electrocatalysts based on metal nanoclusters to enhance catalytic reaction kinetics.

Self-supporting, hierarchically hollow structured NiFe-PBA electrocatalyst for efficient alkaline seawater oxidation

Seawater electrolysis, taking advantage of the huge seawater resource, holds great promise for sustainable hydrogen generation. Compared to conventional water electrolysis, seawater electrolysis is more challenging because of the more complex and corrosive electrolyte and competitive side reactions, which necessitates the development of highly efficient and stable electrocatalysts. In this study, a self-supporting, highly porous NiFe-PBA (Prussian-blue-analogue) electrocatalyst with a hierarchically hollow nanostructure is introduced, which exhibits impressive catalytic performance towards the oxygen evolution in alkaline seawater electrolytes. In NiFe-PBA, the synergistic interaction between Ni and Fe improves intrinsic conductivity for efficient electron transfer, enhances chemical stability in seawater, and boosts overall electrocatalytic activity. The direct use of self-supporting NiFe-PBA as an electrocatalyst avoids the energy-intensive and tedious pyrolysis procedure during the preparation process while making use of the tailored morphological, structural, and compositional benefits of PBA-based materials. By combining the NiFe-PBA catalyst with the NiMoN cathode, the constructed two-electrode electrolyzer achieved a high current density of 500 mA cm-2 at a low cell voltage of 1.782 V for overall electrolysis of alkaline seawater, demonstrating excellent durability for 100 hours. Our findings have important implications for the hydrogen economy and sustainable development through the development of robust and efficient PBA-based electrocatalysts for seawater electrolysis.

Investigating the Structural Evolution and Catalytic Activity of c-Co/Co3Mo Electrocatalysts for Alkaline Hydrogen Evolution Reaction

Transition metal alloys have emerged as promising electrocatalysts due to their ability to modulate key parameters, such as d-band electron filling, Fermi level energy, and interatomic spacing, thereby influencing their affinity towards reaction intermediates. However, the structural stability of alloy electrocatalysts during the alkaline hydrogen evolution reaction (HER) remains a subject of debate. In this study, we systematically investigated the structural evolution and catalytic activity of the c-Co/Co3Mo electrocatalyst under alkaline HER conditions. Our findings reveal that the Co3Mo alloy and H0.9MoO3 exhibit instability during alkaline HER, leading to the breakdown of the crystal structure. As a result, the cubic phase c-Co undergoes a conversion to the hexagonal phase h-Co, which exhibits strong catalytic activity. Additionally, we identified hexagonal phase Co(OH)2 as an intermediate product of this conversion process. Furthermore, we explored the readsorption and surface coordination of the Mo element, which contribute to the enhanced catalytic activity of the c-Co/Co3Mo catalyst in alkaline HER. This work provides valuable insights into the dynamic behavior of alloy-based electrocatalysts, shedding light on their structural stability and catalytic activity during electrochemical reduction processes.

WO3 -Assisted Synergetic Effect Catalyzes Efficient and CO-Tolerant Hydrogen Oxidation for PEMFCs

Developing anode catalysts with substantially enhanced activity for hydrogen oxidation reaction (HOR) and CO tolerance performance is of great importance for the commercial applications of proton exchange membrane fuel cells (PEMFCs). Herein, an excellent CO-tolerant catalyst (Pd-WO3 /C) has been fabricated by loading Pd nanoparticles on WO3 via an immersion-reduction route. A remarkably high power density of 1.33 W cm-2 at 80 °C is obtained by using the optimized 3Pd-WO3 /C as the anode catalyst of PEMFCs, and the moderately reduced power density (73% remained) in CO/H2 mixed gas can quickly recover after removal of CO-contamination from hydrogen fuel, which is not possible by using Pt/C or Pd/C as anode catalyst. The prominent HOR activity of 3Pd-WO3 /C is attributed to the optimized interfacial electron interaction, in which the activated H* adsorbed on Pd species can be effectively transferred to WO3 species through hydrogen spillover effect and then oxidized through the H species insert/output effect during the formation of Hx WO3 in acid electrolyte. More importantly, a novel synergetic catalytic mechanism about excellent CO tolerance is proposed, in which Pd and WO3 respectively absorbs/activates CO and H2 O, thus achieving the CO electrooxidation and re-exposure of Pd active sites for CO-tolerant HOR.

PtNi/PtIn-Skin Fishbone-Like Nanowires Boost Alkaline Hydrogen Oxidation Catalysis

The development of high-performance platinum (Pt)-based electrocatalysts for the hydrogen oxidation reaction (HOR) is highly desirable for hydrogen fuel cells, but it is limited by the sluggish kinetics and severe carbon monoxide (CO) poisoning in alkaline medium. Herein, we explore a class of facet-selected Pt-nickel-indium fishbone-like nanowires (PtNiIn FNWs) featuring high-index facets (HIFs) of Pt3In skin as efficient alkaline HOR catalysts. Impressively, the optimized Pt66Ni6In28 FNWs show the highest mass and specific activities of 4.02 A mgPt-1 and 6.56 mA cm-2, 2.0/2.1 and 13.9/15.6 times larger than those of commercial PtRu/C and commercial Pt/C, respectively, along with a competitive CO-tolerance ability. Specifically, they exhibit only 6.0% current density decay after 10000 s of operation and 25.7% activity loss after 2000 s in the presence of 1000 ppm of CO. Moreover, an isotope experiment and density functional theory (DFT) calculations further prove that the unique structure and synergy among Pt, Ni, and In endow these Pt66Ni6In28 FNWs with an optimized hydrogen binding energy (HBE) and an advantageous hydroxide binding energy (OHBE), giving them excellent alkaline HOR properties. The combined construction of surface-skin and HIFs in PtNiIn FNWs will offer an available method to realize the potential applications of advanced non-PtRu-based catalysts in fuel cells and beyond.

Recent progress of molybdenum carbide based electrocatalysts for electrocatalytic hydrogen evolution reaction

Electrocatalytic hydrogen evolution reaction (HER) is one of the most promising and clean strategies to prepare hydrogen on a large scale. Nevertheless, the efficiency of HER is greatly restricted by the large overpotential at the anode, and it is necessary to develop low cost electrocatalysts with excellent performance and stability. Molybdenum carbide has shown great potential in the field of HER due to its unique electronic structure and physical and chemical properties. In this paper, the current progress of molybdenum carbide-based catalysts for HER is summarized. The influence of phase structure, nanostructure, heterostructure and heteroatoms doping on its catalytic performance is discussed in detail. Especially, the catalytic mechanisms are analyzed according to structural characterization and theoretical calculation results. Finally, the challenges and prospects for the further development of molybdenum carbide-based catalysts for HER are put forward to guide the progress of this field.

Supported Ruthenium Single-Atom and Clustered Catalysts Outperform Benchmark Pt for Alkaline Hydrogen Evolution

Guaranteeing satisfactory catalytic behavior while ensuring high metal utilization has become the problem that needs to be addressed when designing noble-metal-based catalysts for electrochemical reactions. Here, well-dispersed ruthenium (Ru) based clusters with adjacent Ru single atoms (SAs) on layered sodium cobalt oxide (Ru/NC) are demonstrated as a superb electrocatalyst for alkaline HER. The Ru/NC catalyst demonstrates an activity increase by a factor of two relative to the commercial Pt/C. Operando characterizations in conjunction with density functional theory (DFT) simulations uncover the origin of the superior activity and establish a structure-performance relationship, that is, under HER condition, the real active species are Ru SAs and metallic Ru clusters supported on the NC substrate. The excellent alkaline HER activity of the Ru/NC catalyst can be understood by a spatially decoupled water dissociation and hydrogen desorption mechanism, where the NC substrate accelerates the water dissociation rate, and the generated H intermediates would then migrate to the Ru SAs or clusters and recombine to have H2 evolution. More importantly, comparing the two forms of Ru sites, it is the Ru cluster that dominates the HER activity.

Ultrafast Electrical Pulse Synthesis of Highly Active Electrocatalysts for Beyond-Industrial-Level Hydrogen Gas Batteries

The high reliability and proven ultra-longevity make aqueous hydrogen gas (H2 ) batteries ideal for large-scale energy storage. However, the low alkaline hydrogen evolution and oxidation reaction (HER/HOR) activities of expensive platinum catalysts severely hamper their widespread applications in H2 batteries. Here, cost-effective, highly active electrocatalysts, with a model of ruthenium-nickel alloy nanoparticles in ≈3 nm anchored on carbon black (RuNi/C) as an example, are developed by an ultrafast electrical pulse approach for nickel-hydrogen gas (NiH2 ) batteries. Having a competitive low cost of about one fifth of Pt/C benckmark, this ultrafine RuNi/C catalyst displays an ultrahigh HOR mass activity of 2.34 A mg-1 at 50 mV (vs RHE) and an ultralow HER overpotential of 19.5 mV at a current density of 10 mA cm-2 . As a result, the advanced NiH2 battery can efficiently operate under all-climate conditions (from -25 to +50 °C) with excellent durability. Notably, the NiH2 cell stack achieves an energy density up to 183 Wh kg-1 and an estimated cost of ≈49 $ kWh-1 under an ultrahigh cathode Ni(OH)2 loading of 280 mg cm-2 and a low anode Ru loading of ≈62.5 µg cm-2 . The advanced beyond-industrial-level hydrogen gas batteries provide great opportunities for practical grid-scale energy storage applications.

Amorphous nickel hydroxide shell tailors local chemical environment on platinum surface for alkaline hydrogen evolution reaction

In analogy to natural enzymes, an elaborated design of catalytic systems with a specifically tailored local chemical environment could substantially improve reaction kinetics, effectively combat catalyst poisoning effect and boost catalyst lifetime under unfavourable reaction conditions. Here we report a unique design of 'Ni(OH)2-clothed Pt-tetrapods' with an amorphous Ni(OH)2 shell as a water dissociation catalyst and a proton conductive encapsulation layer to isolate the Pt core from bulk alkaline electrolyte while ensuring efficient proton supply to the active Pt sites. This design creates a favourable local chemical environment to result in acidic-like hydrogen evolution reaction kinetics with a lowest Tafel slope of 27 mV per decade and a record-high specific activity and mass activity in alkaline electrolyte. The proton conductive Ni(OH)2 shell can also effectively reject impurity ions and retard the Oswald ripening, endowing a high tolerance to solution impurities and exceptional long-term durability that is difficult to achieve in the naked Pt catalysts. The markedly improved hydrogen evolution reaction activity and durability in an alkaline medium promise an attractive catalyst material for alkaline water electrolysers and renewable chemical fuel generation.

Promoting water formation in sulphate-functionalized Ru for efficient hydrogen oxidation reaction under alkaline electrolytes

Improving the sluggish kinetics of the hydrogen oxidation reaction (HOR) under alkaline electrolytes plays a significant role in the practical application of alkaline polymer electrolyte fuel cells (APEFCs). Here we report a sulphate functionalized Ru catalyst (Ru-SO₄) that exhibits remarkable electrocatalytic performance and stability toward alkaline HOR, with a mass activity of 1182.2 mA mg_PGM^-1, which is four-times higher than that of the pristine Ru catalyst. Theoretical calculations and experimental studies including in situ electrochemical impedance spectroscopy and in situ Raman spectroscopy demonstrate that the charge redistribution on the interface of Ru through sulphate functionalization could lead to optimized adsorption energies of hydrogen and hydroxide, together with facilitated H₂ transfer through the inter Helmholtz plane and precisely tailored interfacial water molecules, contributing to a decreased energy barrier of the water formation step and enhanced HOR performance under alkaline electrolytes.

Synergistic Regulation of Pt Clusters on Porous Support by Mo and P for Robust Bifunctional Hydrogen Electrocatalysis

Developing efficient electrocatalysts toward hydrogen oxidation and evolution reactions (HER/HOR) in alkaline electrolytes is essential for realizing renewable hydrogen technologies. Herein, we demonstrate that the introduction of dual-active species such as Mo and P (Pt/Mo,P@NC) can effectively regulate the surface electronic structure of platinum (Pt) and significantly improve the HOR/HER performance. The optimized Pt/Mo,P@NC exhibits remarkable catalytic activity, achieving a normalized exchange current density of 2.89 mA cm^-2 and a mass activity of 2.3 mA μg_Pt^-1, which are approximately 2.2 and 13.5 times higher than those of the state-of-the-art Pt/C catalyst, respectively. Moreover, it performs an impressive HER performance with an overpotential of 23.4 mV at 10 mA cm^-2, which is lower than most documented alkaline electrocatalysts. Experimental results reveal that the modifying effect of Mo and P optimizes the adsorption of H and OH on Pt/Mo,P@NC, resulting in an outstanding catalytic performance. This work has significant theoretical and practical significance for developing a novel and highly efficient catalyst for bifunctional hydrogen electrocatalysis.

A Medium-entropy oxide as a promising cocatalyst to promote photocatalytic hydrogen evolution

As emerging materials, medium-entropy oxides have attracted wide attention for the huge potential in energy storage, catalytic, magnetic and thermal applications. The electronic effect or the strong synergic effect caused by the construction of medium-entropy system leads to the unique properties of catalysis. In this contribution, we reported a medium-entropy CoNiCu oxide as an efficient cocatalyst for enhanced photocatalytic hydrogen evolution reaction. The target product was synthesized by a process of laser ablation in liquids and graphene oxide was applied as a conductive substrate of it, then it was loaded on the photocatalyst g-C₃N₄. The results showed that the modified photocatalysts exhibited the reduced [Formula: see text] and enhanced abilities of photoinduced charges separation and transfer. Furthermore, a maximum hydrogen production rate was measured to be 1177.52 μmol ·g^-1·h^-1 under the visible light irradiation, which was about 291 times higher than that of pure g-C₃N₄. These findings suggest that the medium-entropy CoNiCu oxide serves as an eminent cocatalyst, which offers a possible pathway towards the broadening of the applications of medium-entropy oxides and provides the alternatives to conventional cocatalysts.

Self-Optimized Ligand Effect of Single-Atom Modifier in Ternary Pt-Based Alloy for Efficient Hydrogen Oxidation

Modifying the atomic and electronic structure of platinum-based alloy to enhance its activity and anti-CO poisoning ability is a vital issue in hydrogen oxidation reaction (HOR). However, the role of foreign modifier metal and the underlying ligand effect is not fully understood. Here, we propose that the ligand effect of single-atom Cu can dynamically modulate the d-band center of Pt-based alloy for boosting HOR performance. By in situ X-ray absorption spectroscopy, our research has identified that the potential-driven structural rearrangement into high-coordination Cu-Pt/Pd intensifies the ligand effect in Pt-Cu-Pd, leading to enhanced HOR performance. Thereby, modulating the d-band structure leads to near-optimal hydrogen/hydroxyl binding energies and reduced CO adsorption energies for promoting the HOR kinetics and the CO-tolerant capability. Accordingly, PtPdCu₁/C exhibits excellent CO tolerance even at 1,000 ppm impurity.

Electronic Modulation and Mechanistic Study of Ru-Decorated Porous Cu-Rich Cuprous Oxide for Robust Alkaline Hydrogen Oxidation and Evolution Reactions

Rational design of high-efficiency and viable electrocatalysts is essential in overcoming the bottleneck of sluggish alkaline hydrogen oxidation/evolution reaction (HOR/HER) kinetics. In this study, a metal-organic framework-derived strategy for constructing a Pt-free catalyst with Ru clusters anchored on porous Cu-Cu₂ O@C is proposed. The designed Ru/Cu-Cu₂ O@C exhibits superior HOR performance, with a mass activity of 2.7 mA  μ g R u - 1 ${{{\rm \mu }{\rm g}}_{{\rm R}{\rm u}}^{-1}}$ at 50 mV, which is about 24 times higher than that of state-of-the-art Pt/C (0.11 mA  μ g P t - 1 ${{{\rm \mu }{\rm g}}_{{\rm P}{\rm t}}^{-1}}$ ). Significantly, Ru/Cu-Cu₂ O@C also displays impressive HER performance by generating 26 mV at 10 mA cm^-2 , which exceeds the majority of documented Ru-based electrocatalysts. Systematic characterization and density functional theory (DFT) calculations reveal that efficient electron transfer between Ru and Cu species results in an attenuated hydrogen binding energy (HBE) of Ru and an enhanced hydroxy binding energy (OHBE) of Cu₂ O, together with an optimized H₂ O adsorption energy with Cu₂ O as the H₂ O*-capturing site, which jointly facilitates HOR and HER kinetics.

Atomically Dispersed Dual-Metal Sites Showing Unique Reactivity and Dynamism for Electrocatalysis

The real structure and in situ evolution of catalysts under working conditions are of paramount importance, especially for bifunctional electrocatalysis. Here, we report asymmetric structural evolution and dynamic hydrogen-bonding promotion mechanism of an atomically dispersed electrocatalyst. Pyrolysis of Co/Ni-doped MAF-4/ZIF-8 yielded nitrogen-doped porous carbons functionalized by atomically dispersed Co-Ni dual-metal sites with an unprecedented N8V4 structure, which can serve as an efficient bifunctional electrocatalyst for overall water splitting. More importantly, the electrocatalyst showed remarkable activation behavior due to the in situ oxidation of the carbon substrate to form C-OH groups. Density functional theory calculations suggested that the flexible C-OH groups can form reversible hydrogen bonds with the oxygen evolution reaction intermediates, giving a bridge between elementary reactions to break the conventional scaling relationship.