Activating and Identifying the Active Site of RuS2 for Alkaline Hydrogen Oxidation Electrocatalysis

Searching for highly efficient and economical electrocatalysts for alkaline hydrogen oxidation reaction (HOR) is crucial for the development of alkaline polymer membrane fuel cells. Here, we report a valid strategy to active pyrite-type RuS2 for alkaline HOR electrocatalysis by introducing sulfur vacancies. The obtained S-vacancies modified RuS2-x exhibits outperformed HOR activity with a current density of 0.676 mA cm-2 and mass activity of 1.43 mA μg-1, which are 15-fold and 40-fold improvement than those of Ru catalyst. In situ Raman spectra demonstrate the formation of S-H bond during the HOR process, identifying the S atom of RuS2-x is the real active site for HOR catalysis. Density functional theory calculations and experimental results including in situ surface-enhanced infrared absorption spectroscopy suggest the introduction of S vacancies can rationally modify the p orbital of S atoms, leading to enhanced binding strength between the S sites and H atoms on the surface of RuS2-x, together with the promoted connectivity of hydrogen-bonding network and lowered water formation energy, contributes to the enhanced HOR performance.

PtPd Atomic Layer Shelled PdCu Hollow Nanoparticles on Partially Unzipped Carbon Nanotubes for Breaking the Activity-Stability Trade-Off toward the Hydrogen Oxidation Reaction in Alkaline Media

Developing highly active yet stable catalysts for the hydrogen oxidation reaction (HOR) in alkaline media remains a significant challenge. Herein, we designed a novel catalyst of atomic PtPd-layer shelled ultrasmall PdCu hollow nanoparticles (HPdCu NPs) on partially unzipped carbon nanotubes (PtPd@HPdCu/W-CNTs), which can achieve a high mass activity, 5 times that of the benchmark Pt/C, and show exceptional stability with negligible decay after 20,000 cycles of accelerated degradation test. The atomically thin PtPd shell serves as the primary active site for the HOR and a protective layer that prevents Cu leaching. Additionally, the HPdCu substrate not only tunes the adsorption properties of the PtPd layer but also prevents corrosive Pt from reaching the interface between NPs and the carbon support, thereby mitigating carbon corrosion. This work introduces a new strategy that leverages the distinct advantages of multiple components to address the challenges associated with slow kinetics and poor durability toward the HOR.

Improving Alkaline Hydrogen Oxidation through Dynamic Lattice Hydrogen Migration in Pd@Pt Core-Shell Electrocatalysts

Tracking the trajectory of hydrogen intermediates during hydrogen electro-catalysis is beneficial for designing synergetic multi-component catalysts with division of chemical labor. Herein, we demonstrate a novel dynamic lattice hydrogen (LH) migration mechanism that leads to two orders of magnitude increase in the alkaline hydrogen oxidation reaction (HOR) activity on Pd@Pt over pure Pd, even ≈31.8 times mass activity enhancement than commercial Pt. Specifically, the polarization-driven electrochemical hydrogenation process from Pd@Pt to PdHx @Pt by incorporating LH allows more surface vacancy Pt sites to increase the surface H coverage. The inverse dehydrogenation process makes PdHx as an H reservoir, providing LH migrates to the surface of Pt and participates in the HOR. Meanwhile, the formation of PdHx induces electronic effect, lowering the energy barrier of rate-determining Volmer step, thus resulting in the HOR kinetics on Pd@Pt being proportional to the LH concentration in the in situ formed PdHx @Pt. Moreover, this dynamic catalysis mechanism would open up the catalysts scope for hydrogen electro-catalysis.

Pb-Modified Ultrathin RuCu Nanoflowers for Active, Stable, and CO-resistant Alkaline Electrocatalytic Hydrogen Oxidation

CO poisoning of Pt group metal (PGM) catalysts is a chronic problem for hydrogen oxidation reaction (HOR), the anodic reaction of hydroxide exchange membrane fuel cell (HEMFC) for converting H2 to electric energy in sustainable manner. We demonstrate here an ultrathin Ru-based nanoflower modified with Pb (PbRuCu NF) as an active, stable, and CO-resistant catalyst for alkaline HOR. Mechanism studies show that the presence of Pb can weaken the adsorption of *H, strengthen *OH adsorption to facilitate CO oxidation, as a result of significantly enhanced HOR activity and improved CO tolerance. Furthermore, in situ electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggests that Pb acts as oxygen-rich site to regulate the behavior of the linear CO adsorption. The optimized Pb1.04 -Ru92 Cu8 /C displays a mass activity and specific activity of 1.10 A mgRu -1 and 5.55 mA cm-2 , which are ≈10 and ≈31 times higher than those of commercial Pt/C. This work provides a facile strategy for the design of Ru-based catalyst with high activity and strong CO-resistance for alkaline HOR, which may promote the fundamental researches on the rational design of functional catalysts.

Stabilizing Low-Valence Single Atoms by Constructing Metalloid Tungsten Carbide Supports for Efficient Hydrogen Oxidation and Evolution

Designing novel single-atom catalysts (SACs) supports to modulate the electronic structure is crucial to optimize the catalytic activity, but rather challenging. Herein, a general strategy is proposed to utilize the metalloid properties of supports to trap and stabilize single-atoms with low-valence states. A series of single-atoms supported on the surface of tungsten carbide (M-WCx , M=Ru, Ir, Pd) are rationally developed through a facile pyrolysis method. Benefiting from the metalloid properties of WCx , the single-atoms exhibit weak coordination with surface W and C atoms, resulting in the formation of low-valence active centers similar to metals. The unique metal-metal interaction effectively stabilizes the low-valence single atoms on the WCx surface and improves the electronic orbital energy level distribution of the active sites. As expected, the representative Ru-WCx exhibits superior mass activities of 7.84 and 62.52 A mgRu -1 for the hydrogen oxidation and evolution reactions (HOR/HER), respectively. In-depth mechanistic analysis demonstrates that an ideal dual-sites cooperative mechanism achieves a suitable adsorption balance of Had and OHad , resulting in an energetically favorable Volmer step. This work offers new guidance for the precise construction of highly active SACs.

Interfacial Engineering of Ni/V2 O3 Heterostructure Catalyst for Boosting Hydrogen Oxidation Reaction in Alkaline Electrolytes

Alkaline fuel cells can permit the adoption of platinum group metal-free (PGM-free) catalysts and cheap bipolar plates, thus further lowering the cost. With the exploration of PGM-free hydrogen oxidation reaction (HOR) catalysts, nickel-based compounds have been considered as the most promising HOR catalysts in alkali. Here we report an interfacial engineering through the formation of nickel-vanadium oxide (Ni/V₂ O₃ ) heterostructures to activate Ni for efficient HOR catalysis in alkali. The strong electron transfer from Ni to V₂ O₃ could modulate the electronic structure of Ni sites. The optimal Ni/V₂ O₃ catalyst exhibits a high intrinsic activity of 0.038 mA cm^-2 and outstanding stability. Experimental and theoretical studies reveal that Ni/V₂ O₃ interface as the active sites can enable to optimize the hydrogen and hydroxyl bindings, as well as protect metallic Ni from extensive oxidation, thus achieving the notable activity and durability.

The Role of Discrepant Reactive Intermediates on Ru-Ru2 P Heterostructure for pH-Universal Hydrogen Oxidation Reaction

Developing highly efficient electrocatalysts for hydrogen oxidation reaction (HOR) under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cell (AEMFC). However, the kinetics of HOR in alkaline media is complicated, resulting in orders of magnitude slower than that in acid, even for the state-of-the-art Pt/C. Here, we find that Ru-Ru₂ P/C heterostructure shows HOR performance with a non-monotonous variation in a whole pH region. Unexpectedly, an inflection point located at pH≈7 is observed, showing an anomalous behavior that HOR activity under alkaline media surpasses acidic media. Combining experimental results and theoretical calculations, we propose the roles of discrepant reactive intermediates for pH-universal HOR, while H* and H₂ O* adsorption strengths are responsible for acidic HOR, and OH* adsorption strength is essential for alkaline HOR. This work not only sheds light on fundamentally understanding the mechanism of HOR but also provides new designing principles for pH-targeted electrocatalysts.

Durable High-Temperature Proton Exchange Membrane Fuel Cells Enabled by the Working-Temperature-Matching Palladium-Hydrogen Buffer Layer

The durability degradation during stack-operating conditions seriously deteriorates the lifetime and performance of the fuel cell. To alleviate the rapid potential rise and performance degradation, an anode design is proposed to match the working temperature of high-temperature proton exchange membrane fuel cells (HT-PEMFCs) with the release temperature of hydrogen from palladium. The result is significantly enhanced hydrogen oxidation reaction (HOR) activity of Pd and superior performance of the Pd anode. Furthermore, Pd as hydrogen buffer and oxygen absorbent layer in the anode can provide additional in situ hydrogen and absorb infiltrated oxygen during local fuel starvation to maintain HOR and suppress reverse-current degradation. Compared with the traditional Pt/C anode, the Pd/C also greatly improved HT-PEMFCs durability during start-up/shut-down and current mutation. The storage/release of hydrogen provides innovative guidance for improving the durability of PEMFCs.