Biomimetic Locomotion of Electrically Powered "Janus" Soft Robots Using a Liquid Crystal Polymer

Biomimetic Soft Actuator with Deformation and Motion Driven by Near-Infrared Light

Restricted by the inherent low sensitivity of materials and complex integration technology, it is difficult for existing soft actuators (s-actuators) to simultaneously possess the advantages of flexibility, fast response, and simple manufacturing, which greatly limits their practical applications. Herein, a stretchable (ε = 200%) nanocomposite film capable of deformation and motion driven by near infrared light (NIR) was developed using multi-walled carbon nanotubes (MWCNTs) as the light absorption-photothermal conversion nanonetwork, and liquid crystal polymer (LCP) as an elastic matrix featured reversible phase transition. Furthermore, s-actuators with various deformation and motion modes have been realized employing MWCNT/LCP nanocomposite film. Based on the mechanism that photothermal-effect-regulated liquid crystal-isotropic phase transition in LCP can induce macroscopic deformation of nanocomposites, MWCNT/LCP s-actuators have completed a series of complex deformation and motion tasks such as opening the knot, "V"-shape reversible deformation (30 s per cycle), the "spring" rotating and unfolding, imitating a "caterpillar" walking in a straight line (the average speed is 13 s/mm), etc. This work provides an effective strategy for the intelligent development of s-actuators.

From Coils to Crawls: A Snake-Inspired Soft Robot for Multimodal Locomotion and Grasping

Currently, numerous biomimetic robots inspired by natural biological systems have been developed. However, creating soft robots with versatile locomotion modes remains a significant challenge. Snakes, as invertebrate reptiles, exhibit diverse and powerful locomotion abilities, including prey constriction, sidewinding, accordion locomotion, and winding climbing, making them a focus of robotics research. In this study, we present a snake-inspired soft robot with an initial coiling structure, fabricated using MXene-cellulose nanofiber ink printed on pre-expanded polyethylene film through direct ink writing technology. The controllable fabrication of initial coiling structure soft robot (ICSBot) has been achieved through theoretical calculations and finite element analysis to predict and analyze the initial structure of ICSBot, and programmable ICSBot has been designed and fabricated. This robot functions as a coiling gripper capable of grasping objects with complex shapes under near infrared light stimulation. Additionally, it demonstrates multi-modal crawling locomotion in various environments, including confined spaces, unstructured terrains, and both inside and outside tubes. These results offer a novel strategy for designing and fabricating coiling-structured soft robots and highlight their potential applications in smart and multifunctional robotics.

Controlling Self-Oscillation of a Single-Layer Liquid Crystal Elastomer at the Air-Water Interface via Light Programming for Water Strider-Inspired Aquatic Robots

Biomimicking aquatic organisms offers many opportunities for designing intelligent robots that can freely move on water. However, most works were focused on multilayered materials or assembled structures and faced limitations in stability, versatility, and motion navigation. Here, we develop an assembly-free water-strider-like aquatic robot using a single layer of light-programmable liquid-crystal elastomer (LCE) that could be used to create asymmetric structures. The LCE strider mimics both the shape and functions of natural water striders; it is designed with four legs, with the fore and hind legs being programmed respectively via light. Consequently, the LCE strider shows self-oscillation and self-propulsion behaviors on low-grade thermal water with a temperature gradient at the air-water interface, owing to unbalanced changes in the contact areas and tensions between the legs and water. Furthermore, the trajectories of the LCE strider are manipulated by NIR light after selectively depositing polydopamine with photothermal conversion. In this way, path navigation is realized, that is, moving straight and on-demand turning, similar to the movement of natural water striders. This study should inspire the development of soft intelligent robots using shape-morphing materials.

Kirigami-Inspired Light-Responsive Conical Spiral Actuators with Large Contraction Ratio Using Liquid Crystal Elastomer Fiber

Liquid crystal elastomers (LCEs) are among the key smart materials driving soft robotics and LCE fibers have garnered significant attention for their rapid response characteristics. A convenient and fast method for programming orientations of liquid crystal molecules is a focal issue in LCE applications. Inspired by the Kirigami technique, here, we propose a novel method for fabricating LCE fibers based on customizable cutting paths and secondary photo-cross-linking. While most existing LCE actuators exhibit contraction ratios of around 30 to 40%, our conical spiral actuator, fabricated from LCE-carbon nanotube (CNT) fiber using the proposed method, demonstrates a significantly higher contraction ratio, reaching up to 80%. The contraction ratio can be controlled by adjusting the cutting path parameters and we elucidate the mechanism linking liquid crystal orientation to the distribution of contraction ratio. Additionally, the conical spiral deformation of the actuator can be manipulated with light radiation, enabling versatile functionalities such as catching, twisting, and gripping. We hope that the novel LCE fiber fabrication method presented provides new insights for programming and preparing LCE fibers, offering a valuable reference for the application of smart soft materials.

Thermal Gradient-Driven Heterogeneous Actuation of Liquid Crystal Elastomers for a Crawling Robot

Emerging soft robots based on liquid crystal elastomers (LCEs) exhibit remarkable capabilities for large reversible shape morphing, enabling them to adapt to complex environments and perform diverse tasks such as locomotion and camouflage. Despite extensive studies, current methods for locally controlled actuation of LCE-based soft robots often involve intricate structural design, complex programming of LCEs, incorporation of multiple materials, or complex actuation methods. Here, we present a simple and efficient approach to achieve multiple deformation modes within a simply programmed LCE structure by harnessing Joule heating-induced thermal gradients across the LCE volume. Oxidized liquid metal (LM) thin films, which exhibit increased resistance, enhanced viscosity, high thermal conductivity, and large deformability, are employed for Joule heating in this study. Using an LCE strip programmed via uniaxial stretching as an example, we perform systematic studies on the effect of essential parameters, including the actuation voltage, LCE dimensions, and the LM-to-LCE thickness ratio, on the deformation behaviors of LCEs induced by three-dimensional thermal gradients across the LCE volume. In addition, concurrently actuating two adjacent surfaces of the LCE strip yields previously inaccessible coupled bending behaviors. Finally, we demonstrate a crawling robot constructed from LM-coated LCE strips with adjustable bending capabilities, which enable multimode locomotion, including forward movement and turns, enhancing biomimetic functionality akin to leg movements observed in living organisms like reptiles. The reported strategy, which is both straightforward and versatile, promises scalability and holds potential for various applications in multifunctional intelligent systems including soft robotics and biomedical devices.

Humidity-Sensing and Moisture-Steering Liquid Crystal Elastomer Actuator

A liquid crystal elastomer (LCE) actuator capable of colorimetric humidity sensing is realized. The designed LCE features acid protonated amino azobenzene side groups in its structure, which endow the actuator with the hygroscopicity and act as the humidity reporter via color changes. Given that the protonated and deprotonated chromophore absorb visible light at different wavelengths, when the protonated LCE is under higher humidity, it absorbs more water that deprotonates azobenzene and leads to a change in color. This humidity-dependent color change is fast, because surface protonation of the actuator is enough. The initial color and the sensitivity to humidity variation are determined by the extent of acid protonation, and the reversible color changes are distinguishable by the naked eye over a wide humidity range. The humidity sensing of LCE actuator in motion is demonstrated using thermally driven rolling rod actuators. Moreover, through spatial-selective exposure of the rolling rod actuator to water mist, the moisture can act as a stimulus to change or reverse the rolling direction and reduce the rolling speed. The achieved nature-inspired colorimetric humidity sensing capability represents an intelligent function for LCE actuators and may widen their application scope.

Maximizing light-to-heat conversion of Ti3C2Tx MXene metamaterials with wrinkled surfaces for artificial actuators

MXene, a promising photothermal nanomaterial, faces challenges due to densely stacked nanosheets with high refractive index (RI). To maximize photothermal performance, MXene metamaterials (m-MXenes) are developed with a superlattice with alternating MXene and organic layers, reducing RI and inducing multiple light reflections. This approach increases light absorption, inducing 90% photothermal conversion efficiency. The m-MXene is coated onto liquid crystal elastomer (LCE) fibers, as actuating platforms via a dip-coating (m-MXene/aLCE fiber), exhibiting excellent light-driven actuating owing to the synergetic effect of the patterned m-MXene laysers by structural deformation. The m-MXene/aLCE fibers lift ~6,900 times their weight and exhibit a work density 6 times higher than that of human skeletal muscle. It is applied to artificial muscles, grippers, and a bistable structure (a shooting device, and switchable gripper). Our study offers an effective strategy to enhance light absorption in 2D nanomaterials and contributes to advancements in photothermal technologies in various fields.

Ultra-Strong Janus Covalent Organic Framework Membrane with Smart Response to Organic Vapor

Vapor-driven smart Janus materials have made significant advancements in intelligent monitoring, control, and interaction, etc. Nevertheless, the development of ultrafast response single-layer Janus membrane, along with a deep exploration of the smart response mechanisms, remains a long-term endeavor. Here, the successful synthesis of a high-crystallinity single-layer Covalent organic framework (COF) Janus membrane is reported by morphology control. This kind of membrane displays superior mechanical properties and specific surface area, along with excellent responsiveness to CH2Cl2 vapor. The analysis of the underlying mechanisms reveals that the vapor-induced breathing effect of the COF and the stress mismatch of the Janus structure play a crucial role in its smart deformation performance. It is believed that this COF Janus membrane holds promise for complex tasks in various fields.

Hot Fingers: Individually Addressable Graphene-Heater Actuated Liquid Crystal Grippers

Liquid crystal-based actuators are receiving increased attention for their applications in wearables and biomedical or surgical devices, with selective actuation of individual parts/fingers still being in its infancy. This work presents the design and realization of two gripper devices with four individually addressable liquid-crystal network (LCN) actuators thermally driven via printed graphene-based heating elements. The resistive heat causes the all-organic actuator to bend due to anisotropic volume expansions of the splay-aligned sample. A heat transfer model that includes all relevant interfaces is presented and verified via thermal imaging, which provides good estimates of dimensions, power production, and resistance required to reach the desired temperature for actuation while maintaining safe electrical potentials. The LCN films displace up to 11 mm with a bending force of 1.10 mN upon application of 0-15 V potentials. The robustness of the LCN finger is confirmed by repetitive on/off switching for 500 cycles. Actuators are assembled into two prototypes able to grip and lift objects of small weights (70-100 mg) and perform complex actions by individually controlling one of the device's fingers to grip an additional object. Selective actuation of parts in soft robotic devices will enable more complex motions and actions to be performed.

Responsive Liquid Crystal Network Microstructures with Customized Shapes and Predetermined Morphing for Adaptive Soft Micro-Optics

Stimuli-responsive materials have garnered substantial interest in recent years, particularly liquid crystal networks (LCNs) with sophisticatedly designed structures and morphing capabilities. Extensive efforts have been devoted to LCN structural designs spanning from two-dimensional (2D) to three-dimensional (3D) configurations and their intricate morphing behaviors through designed alignment. However, achieving microscale structures and large-area preparation necessitates the development of novel techniques capable of facilely fabricating LCN microstructures with precise control over both overall shape and alignment, enabling a 3D-to-3D shape change. Herein, a simple and cost-effective in-cell soft lithography (ICSL) technique is proposed to create LCN microstructures with customized shapes and predesigned morphing. The ICSL technique involves two sequential steps: fabricating the desired microstructure as the template by using the photopolymerization-induced phase separation (PIPS) method and reproducing the LCN microstructures through templating. Meanwhile, surface anchoring is employed to design and achieve molecular alignment, accommodating different deformation modes. With the proposed ICSL technique, cylindrical and spherical microlens arrays (CMLAs and SMLAs) have been successfully fabricated with stimulus-driven polarization-dependent focusing effects. This technique offers distinct advantages including high customizability, large-area production, and cost-effectiveness, which pave a new avenue for extensive applications in different fields, exemplified by adaptive soft micro-optics and photonics.

A Multimodal Self-Propelling Tensegrity Structure

Tensegrity structure is composed of tensile cables and compressive rods, offering high stiffness-to-mass ratio, deploy ability, and excellent energy damping capability. The active and dynamic tensegrity designs demonstrate great potential for soft robots. In previous designs, the movement has relied on carefully controlled input power or manually controlled light irradiation, limiting their potential applications. Here, a hybrid tensegrity structure (HTS) is constructed by integrating thermally responsive cables, nonresponsive cables, and stiff rods. The HTS can self-propel continuously on a hot surface due to its unique geometry. The HTS allows for the easy achievement of multimodal self-propelled locomotive modes, which has been challenging for previously demonstrated self-propelling structures. Additionally, using Velcro tapes to adhere the rods and cables together, a modulable and reassemblable HTS is created. The HTS introduced in this study presents a new strategy and offers a large design space for constructing self-propelling and modulable robots.

Multimodal Autonomous Locomotion of Liquid Crystal Elastomer Soft Robot

Self-oscillation phenomena observed in nature serve as extraordinary inspiration for designing synthetic autonomous moving systems. Converting self-oscillation into designable self-sustained locomotion can lead to a new generation of soft robots that require minimal/no external control. However, such locomotion is typically constrained to a single mode dictated by the constant surrounding environment. In this study, a liquid crystal elastomer (LCE) robot capable of achieving self-sustained multimodal locomotion, with the specific motion mode being controlled via substrate adhesion or remote light stimulation is presented. Specifically, the LCE is mechanically trained to undergo repeated snapping actions to ensure its self-sustained rolling motion in a constant gradient thermal field atop a hotplate. By further fine-tuning the substrate adhesion, the LCE robot exhibits reversible transitions between rolling and jumping modes. In addition, the rolling motion can be manipulated in real time through light stimulation to perform other diverse motions including turning, decelerating, stopping, backing up, and steering around complex obstacles. The principle of introducing an on-demand gate control offers a new venue for designing future autonomous soft robots.

Photochemically responsive polymer films enable tunable gliding flights

Miniaturized passive fliers based on smart materials face challenges in precise control of shape-morphing for aerodynamics and contactless modulation of diverse gliding modes. Here, we present the optical control of gliding performances in azobenzene-crosslinked liquid crystal networks films through photochemical actuation, enabling reversible and bistable shape-morphing. First, an actuator film is integrated with additive constructs to form a rotating glider, inspired by the natural maple samara, surpassing natural counterparts in reversibly optical tuning of terminal velocity, rotational rate, and circling position. We demonstrate optical modulation dispersion of landing points for the photo-responsive microfliers indoors and outdoors. Secondly, we show the scalability of polymer film geometry for miniature gliders with similar light tunability. Thirdly, we extend the material platform to other three gliding modes: Javan cucumber seed-like glider, parachute and artificial dandelion seed. The findings pave the way for distributed microflier with contactless flight dynamics control.

Programming Motion into Materials Using Electricity-Driven Liquid Crystal Elastomer Actuators

As thermally driven smart materials capable of large reversible deformations, liquid crystal elastomers (LCEs) have great potential for applications in bionic soft robots, artificial muscles, controllable actuators, and flexible sensors due to their ability to program controllable motion into materials. In this article, we introduce conductive LCE actuators using a liquid metal electrothermal layer and a polyethylene terephthalate substrate. Our LCE actuators can be stimulated at low currents from 2 to 4 A and produce a maximum work density of 9.4 k J ∕ m 3 . We illustrate the potential applications of this system by designing a palm-activated artificial muscle gripper, which can be used to grasp soft objects ranging from 5 to 55 mm in size, and even ring-shaped workpieces with precise external or internal support. Furthermore, inspired by the movement of fruit fly larvae, we designed a new soft robot capable of bioinspired crawling and turning by inducing anisotropic friction with an asymmetric design. Finally, we illustrate advanced motional control by designing an autonomously rotating wheel based on the asymmetric contraction of its spokes. To assist in the production of autonomously moving robots, we provide a thorough characterization of its motion dynamics.

Adaptive nanotube networks enabling omnidirectionally deformable electro-driven liquid crystal elastomers towards artificial muscles

Artificial muscles that can convert electrical energy into mechanical energy promise broad scientific and technological applications. However, existing electro-driven artificial muscles have been plagued with problems that hinder their practical applications: large electro-mechanical attenuation during deformation, high-driving voltages, small actuation strain, and low power density. Here, we design and create novel electro-thermal-driven artificial muscles rationally composited by hierarchically structured carbon nanotube (HS-CNT) networks and liquid crystal elastomers (LCEs), which possess adaptive sandwiched nanotube networks with angulated-scissor-like microstructures, thus effectively addressing above problems. These HS-CNT/LCE artificial muscles demonstrate not only large strain (>40%), but also remarkable conductive robustness (R/R0 < 1.03 under actuation), excellent Joule heating efficiency (≈ 233 °C at 4 V), and high load-bearing capacity (R/R0 < 1.15 at 4000 times its weight loaded). In addition, our artificial muscles exhibit real-muscle-like morphing intelligence that enables preventing mechanical damage in response to excessively heavyweight loading. These high-performance artificial muscles uniquely combining omnidirectional stretchability, robust electrothermal actuation, low driving voltage, and powerful mechanical output would exert significant technological impacts on engineering applications such as soft robotics and wearable flexible electronics.

Rotini-like MXene@LCE Actuator with Diverse and Programmable Actuation Based on Dual-mode Synergy

Liquid crystalline elastomer (LCE) exhibits muscle-like actuation upon order-disturbed stimulus, offering ample room for designing soft robotic systems. Multimodal LCE is demonstrated to unleash the potential to perform multitasks. However, each actuation mode is typically isolated. In contrast, coordination between different actuation modes based on an MXene-doped LCE is realized, whose actuation can be triggered either by directly heating/cooling or using near-infrared light due to the photo-thermal effect of MXene. As such, the two activation modes (heat and light) not only can work individually to offer stable actuation under different conditions but also can collaborate synergistically to generate more intelligent motions, such as achieving the brake and turn of an autonomous rolling. The principle therefore can diversify the design principles for multifunctional soft actuators and robotics.

Bioinspired Soft Electrostatic Accordion-Fold Actuators

Increasing interests have been directed toward the exploitation of origami techniques in developing biomimetic soft robots. There is a need for effective design solutions to exploit the properties of origami structure with simplified assembly and improved robotic mobility. In this study, inspired by human long-standing jumps, we present a soft electrostatically driven legged accordion fold actuator made by turning a flat paper into hollow polyhedron structure with a spring like rear and capable of electrostatic pad-assisted steering and carrying loads. Without the need for integration of external actuators, the actuator is composed of the electrostatic origami actuator itself supported by a single-fold leg with fast response, easy fabrication process, and low cost. Initiated by periodic deformation around the folding hinges caused by alternating current voltage and ground reaction forces, the actuators exhibit a unique jump-slide movement outperforming other existing soft electrostatic actuators/robots in terms of relative speed. We examined the effect of different geometric and external factors on the relative speed and highlighted the significance of body scale and short-edge panels as the elastic elements, as well as operating at resonance frequency in producing effective performances. Theoretical locomotion models and finite element analysis were carried out to interpret the working principle and validate experimental results.

Dynamic Shape Change of Liquid Crystal Polymer Based on An Order-Order Phase Transition

Liquid crystal actuators conventionally undergo shape changes across an order-disorder phase transition between liquid crystal (LC) and isotropic phases. In this study, we introduce an innovative Liquid Crystal Polymer (LCP) actuator harnessing an order-order LC phase transition mechanism. The LCP film is easily stretchable within the LC phase, facilitated by the π-π stacking of phenyl groups serving as robust physical crosslinking points, and thereby transforms to a stable monodomain structure. The resultant monodomain LCP actuator shows a distinctive reversible dynamic shape change, exhibiting extension followed by contraction along the LC director on cooling. The extension is propelled by the reversible smectic C to smectic A phase transition, and the contraction is attributed to the re-entry to the smectic C phase from smectic A phase. Thermal annealing temperature determines this peculiar dynamic shape change, which occurs during both heating and cooling processes. This pivotal attribute finds manifestation in gripper and flower-shaped actuators, adeptly executing grabbing and releasing as well as blooming and closure motions within a single thermal stimulation. In essence, our study introduces an innovative approach to the realm of LCP actuators, ushering in a new avenue for the design and fabrication of versatile and dynamically responsive LCP actuators.

Battery-free, wireless, and electricity-driven soft swimmer for water quality and virus monitoring

Miniaturized mobile electronic system is an effective candidate for in situ exploration of confined spaces. However, realizing such system still faces challenges in powering issue, untethered mobility, wireless data acquisition, sensing versatility, and integration in small scales. Here, we report a battery-free, wireless, and miniaturized soft electromagnetic swimmer (SES) electronic system that achieves multiple monitoring capability in confined water environments. Through radio frequency powering, the battery-free SES system demonstrates untethered motions in confined spaces with considerable moving speed under resonance. This system adopts soft electronic technologies to integrate thin multifunctional bio/chemical sensors and wireless data acquisition module, and performs real-time water quality and virus contamination detection with demonstrated promising limits of detection and high sensitivity. All sensing data are transmitted synchronously and displayed on a smartphone graphical user interface via near-field communication. Overall, this wireless smart system demonstrates broad potential for confined space exploration, ranging from pathogen detection to pollution investigation.

Impact of Molecular-level Structural Disruption on Relaxation Dynamics of Polymers with End-on and Side-on Liquid Crystal Moieties

In side-chain liquid crystal polymers (SCLCPs), short side chains are attached on a flexible polymer backbone, and each side chain can have a liquid crystal (LC) group attached at the final bead in either an end-on or a side-on configuration. SCLCPs with random sequences of end-on and side-on LC moieties exhibit nonmonotonic thermal behavior as a function of composition, with some mixed sequences having a lower isotropic to LC phase transition than either purely end-on or side-on configurations. The origin of this nonmonotonic thermal trend lies in the disruption of molecular-level positional ordering and alignment due to the different preferred types of ordering of the different LC attachment types. We compare coarse-grained molecular dynamics (MD) simulations and experiments on SCLCP systems with only one type of LC moiety and demonstrate qualitative agreement in the observed mesophases of end-on and side-on SCLCP systems. Specifically, end-on SCLCPs display a smectic B-like mesophase, with layers of polymer between LC layers, while side-on SCLCPs exhibit a quasi-hexagonal columnar structure of polymer and a nematic surrounding the LC mesophase. Detailed analysis of SCLCP systems with various compositions of these types of LC attachments via MD reveals structural disruption in systems with intermediate compositions. Simulation snapshots and anisotropy ratio measurements show how random SCLCP systems deviate from the expected behavior of prolate or oblate systems in terms of their conformation. This molecular disruption in random SCLCP systems, particularly with a high composition of side-on LC moieties, also significantly impacts the relaxation dynamics. Modifying the composition of the LC type of attachment (molecular structure) is a possible route to tuning both the phase behavior and mechanical response of these systems.

Variable stiffness soft robotic gripper: design, development, and prospects

The advent of variable stiffness soft robotic grippers furnishes a conduit for exploration and manipulation within uncharted, non-structured environments. The paper provides a comprehensive review of the necessary technologies for the configuration design of soft robotic grippers with variable stiffness, serving as a reference for innovative gripper design. The design of variable stiffness soft robotic grippers typically encompasses the design of soft robotic grippers and variable stiffness modules. To adapt to unfamiliar environments and grasp unknown objects, a categorization and discussion have been undertaken based on the contact and motion manifestations between the gripper and the things across various dimensions: points contact, lines contact, surfaces contact, and full-bodies contact, elucidating the advantages and characteristics of each gripping type. Furthermore, when designing soft robotic grippers, we must consider the effectiveness of object grasping methods but also the applicability of the actuation in the target environment. The actuation is the propelling force behind the gripping motion, holding utmost significance in shaping the structure of the gripper. Given the challenge of matching the actuation of robotic grippers with the target scenario, we reviewed the actuation of soft robotic grippers. We analyzed the strengths and limitations of various soft actuation, providing insights into the actuation design for soft robotic grippers. As a crucial technique for variable stiffness soft robotic grippers, variable stiffness technology can effectively address issues such as poor load-bearing capacity and instability caused by the softness of materials. Through a retrospective analysis of variable stiffness theory, we comprehensively introduce the development of variable stiffness theory in soft robotic grippers and showcase the application of variable stiffness grasping technology through specific case studies. Finally, we discuss the future prospects of variable stiffness grasping robots from several perspectives of applications and technologies.

Tough and Photo-Plastic Liquid Crystal Elastomer with a 2-Fold Dynamic Linker for Artificial Muscles

Liquid crystal elastomers (LCEs) have been optimized by combining cross-linkers and dynamic bonds to achieve a reversible actuation behavior comparable to living skeletal muscles. In this study, one unique type of segment with 2-fold dynamic properties was introduced into LCEs, which offered not only dynamic diselenide covalent bonds for thermo-/photoplasticity but also H-bond arrays for dynamic cross-linking and mechanical robustness. Besides self-healing, self-welding, and recyclability, the LCEs were reprogrammable with elevated temperature or intensive visible light irradiation. The resultant LCEs gave an actuation blocking stress of 1.96 MPa and an elastic modulus of 14.4 MPa at 80 °C. The actuation work capacity reached 135.2 kJ m-3. When incorporating the Joule electrode or photothermal materials, the LCEs could be programmed as the electricity-driven and photothermal artificial muscles and thereby promised the application both as a biomimetic artificial hand and as an energy collector from sunlight. Thus, the 2-fold dynamic LCEs offered the pathway of enabling the reversible actuation behavior comparable to living skeletal muscles and promising applications in sustainable actuators, artificial muscles, and soft robots.

Four-Dimensional Micro/Nanorobots via Laser Photochemical Synthesis towards the Molecular Scale

Miniaturized four-dimensional (4D) micro/nanorobots denote a forerunning technique associated with interdisciplinary applications, such as in embeddable labs-on-chip, metamaterials, tissue engineering, cell manipulation, and tiny robotics. With emerging smart interactive materials, static micro/nanoscale architectures have upgraded to the fourth dimension, evincing time-dependent shape/property mutation. Molecular-level 4D robotics promises complex sensing, self-adaption, transformation, and responsiveness to stimuli for highly valued functionalities. To precisely control 4D behaviors, current-laser-induced photochemical additive manufacturing, such as digital light projection, stereolithography, and two-photon polymerization, is pursuing high-freeform shape-reconfigurable capacities and high-resolution spatiotemporal programming strategies, which challenge multi-field sciences while offering new opportunities. Herein, this review summarizes the recent development of micro/nano 4D laser photochemical manufacturing, incorporating active materials and shape-programming strategies to provide an envisioning of these miniaturized 4D micro/nanorobots. A comparison with other chemical/physical fabricated micro/nanorobots further explains the advantages and potential usage of laser-synthesized micro/nanorobots.

Liquid Crystalline Elastomer for Separate or Collective Sensing and Actuation Functions

A porous liquid crystalline elastomer actuator filled with an ionic liquid (PLCE-IL) is shown to exhibit the functions of two classes of materials: electrically responsive, deformable materials for sensing and soft active materials for stimuli-triggered actuation. On one hand, upon the order-disorder phase transition of aligned mesogens, PLCE-IL behaves like a typical actuator capable of reversible shape change and can be used to assemble light-fuelled soft robot. On the other hand, at temperatures below the phase transition, PLCE-IL is an elastomer that can sustain and sense large deformations of various modes as well as environmental condition changes by reporting the corresponding electrical resistance variation. The two distinguished functions can also be used collectively with PLCE-IL integrated in one device. This intelligent feature is demonstrated with an artificial arm. When the arm is manually powered to fold and unfold, the PLCE-IL strip serves as a deformation sensor; while when the manual power is not available, the role of the PLCE-IL strip is switched to an actuator that enables light-driven folding and unfolding of the arm. This study shows that electrically responsive LCEs are a potential materials platform that offers possibilities for merging deformable electronic and actuation applications.

Bio-Mimic, Fast-Moving, and Flippable Soft Piezoelectric Robots

Cheetahs achieve high-speed movement and unique athletic gaits through the contraction and expansion of their limbs during the gallop. However, few soft robots can mimic their gaits and achieve the same speed of movement. Inspired by the motion gait of cheetahs, here the resonance of double spiral structure for amplified motion performance and environmental adaptability in a soft-bodied hopping micro-robot is exploited. The 0.058 g, 10 mm long tethered soft robot is capable of achieving a maximum motion speed of 42.8 body lengths per second (BL/s) and a maximum average turning speed of 482° s-1 . In addition, this robot can maintain high speed movement even after flipping. The soft robot's ability to move over complex terrain, climb hills, and carry heavy loads as well as temperature sensors is demonstrated. This research opens a new structural design for soft robots: a double spiral configuration that efficiently translates the deformation of soft actuators into swift motion of the robot with high environmental adaptability.

Enabling liquid crystal elastomers with tunable actuation temperature

Liquid crystalline elastomers are regarded as a kind of desirable soft actuator material for soft robotics and other high-tech areas. The isotropization temperature (T_i) plays an important role as it determines the actuation temperature and other properties, which in turn has a great effect on their applications. In the past, the common physical methods (e.g. annealing) to tune T_i is not applicable to tune the actuation temperature. The new T_i obtained by annealing immediately goes back to the old one once it is heated to a temperature above T_i, while actuation needs a temperature higher than T_i. For a fully cross-linked LCE material, once it is synthesized, the actuation temperature is fixed. Accordingly, the actuation temperature can not be tuned unless the chemical structure is changed, which usually needs to start from the very beginning of the molecular design and material synthesis. Here, we found that different T_i achieved by annealing can be preserved by reversible reactions of dynamic covalent bonds in covalently adaptable LC networks including LC vitrimers. Thus, a variety of soft actuators with different actuation temperatures can be obtained from the same fully cross-linked LCE material. As the tuning of T_i is also reversible, the same actuator can be adjusted for applications with different actuation temperature requirements. Such tuning will also expand the application of LCEs.

Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics

Liquid crystal elastomers (LCEs) have grown in popularity in recent years as a stimuli-responsive material for soft actuators and shape reconfigurable structures. To make these material systems electrically responsive, they must be integrated with soft conductive materials that match the compliance and deformability of the LCE. This study introduces a design and manufacturing methodology for combining direct ink write (DIW) 3D printing of soft, stretchable conductive inks with DIW-based "4D printing" of LCE to create fully integrated, electrically responsive, shape programmable matter. The conductive ink is composed of a soft thermoplastic elastomer, a liquid metal alloy (eutectic gallium indium, EGaIn), and silver flakes, exhibiting both high stretchability and conductivity (order of 10⁵ S m^-1). Empirical tuning of the LCE printing parameters gives rise to a smooth surface (<10 μm) for patterning the conductive ink with controlled trace dimensions. This multimaterial printing method is used to create shape reconfigurable LCE devices with on-demand circuit patterning that could otherwise not be easily fabricated through traditional means, such as an LCE bending actuator able to blink a Morse code signal and an LCE crawler with an on/off photoresistor controller. In contrast to existing fabrication methodologies, the inclusion of the conductive ink allows for stable power delivery to surface mount devices and Joule heating traces in a highly dynamic LCE system. This digital fabrication approach can be leveraged to push LCE actuators closer to becoming functional devices, such as shape programmable antennas and actuators with integrated sensing.

Reversible Perspiring Artificial "Fingertips"

Fingertip perspiration is a vital process within human predation, to which the species owes its survival and its biological success. In this paper, the unique human ability of extensive perspiration and controlled friction in self-assembled cholesteric liquid crystals is recreated, mimicking the natural processes that occur in the dermis and epidermis of human skin. This is achieved by inducing porosity in responsive, liquid-bearing material through the controlled-polymerization phase-separation process. The unique topography of human fingerprints is further emulated in the materials by balancing the parallel chirality-induced force and the perpendicular substrate-anchoring force during synthesis. As a result, artificial fingertips are capable of secreting and re-absorbing liquid upon light illumination. By demonstrating the function of the soft material in a tribological aspect, it exhibits a controllable anti-sliding property comparable to human fingertips and subsequently attains a higher degree of biomimicry. This biomimetic fingertip is envisioned being applied in a multitude of fields, ranging from biomedical instruments to interactive, human-like soft robotic devices.

Bio-Inspired Soft-Rigid Hybrid Smart Artificial Muscle Based on Liquid Crystal Elastomer and Helical Metal Wire

Artificial muscles are of significant value in robotic applications. Rigid artificial muscles possess a strong load-bearing capacity, while their deformation is small; soft artificial muscles can be shifted to a large degree; however, their load-bearing capacity is weak. Furthermore, artificial muscles are generally controlled in an open loop due to a lack of deformation-related feedback. Human arms include muscles, bones, and nerves, which ingeniously coordinate the actuation, load-bearing, and sensory systems. Inspired by this, a soft-rigid hybrid smart artificial muscle (SRH-SAM) based on liquid crystal elastomer (LCE) and helical metal wire is proposed. The thermotropic responsiveness of the LCE is adopted for large reversible deformation, and the helical metal wire is used to fulfill high bearing capacity and electric heating function requirements. During actuation, the helical metal wire's resistance changes with the LCE's electrothermal deformation, thereby achieving deformation-sensing characteristics. Based on the proposed SRH-SAM, a reconfigurable blazed grating plane and the effective switch between attachment and detachment in bionic dry adhesion are accomplished. The SRH-SAM opens a new avenue for designing smart artificial muscles and can promote the development of artificial muscle-based devices.

Caterpillar-inspired soft crawling robot with distributed programmable thermal actuation

Many inspirations for soft robotics are from the natural world, such as octopuses, snakes, and caterpillars. Here, we report a caterpillar-inspired, energy-efficient crawling robot with multiple crawling modes, enabled by joule heating of a patterned soft heater consisting of silver nanowire networks in a liquid crystal elastomer (LCE)-based thermal bimorph actuator. With patterned and distributed heaters and programmable heating, different temperature and hence curvature distribution along the body of the robot are achieved, enabling bidirectional locomotion as a result of the friction competition between the front and rear end with the ground. The thermal bimorph behavior is studied to predict and optimize the local curvature of the robot under thermal stimuli. The bidirectional actuation modes with the crawling speeds are investigated. The capability of passing through obstacles with limited spacing are demonstrated. The strategy of distributed and programmable heating and actuation with thermal responsive materials offers unprecedented capabilities for smart and multifunctional soft robots.

Three-dimensional liquid crystal polymer actuators assembled by athermal photo-welding

Photodeformable liquid crystal polymers (LCPs) exhibit shape changes of different modes like bending, twisting, and oscillation, which depend on the orientation of liquid crystals. However, it is challenging to create a three-dimensional (3D) actuator with distinct actuation modes due to the difficulty of local orientation in a complex bulk architecture. Here we propose a strategy based on athermal photo-welding to integrate different orientations into a single flexible actuator by the photofluidization of azobenzene-containing linear LCPs. Stretch-induced uniaxial films are cut in different directions and subsequently welded via local photofluidization, during which the LCP transitions from a high-modulus glassy state to a rubbery state upon photoisomerization of azobenzene at room temperature. As a consequence, a cucumber vine-like structure with the opposite handedness and a lifting gripper are constructed by such a cut-and-weld process, demonstrating diverse deformation modes of winding, unwinding, and curling. This strategy provides an athermal process for the fabrication of seamless 3D flexible actuators without structural defects, which have potential applications in micromechanical systems, soft robotics, and artificial muscles.

Energy-shaping control of a muscular octopus arm moving in three dimensions

Flexible octopus arms exhibit an exceptional ability to coordinate large numbers of degrees of freedom and perform complex manipulation tasks. As a consequence, these systems continue to attract the attention of biologists and roboticists alike. In this article, we develop a three-dimensional model of a soft octopus arm, equipped with biomechanically realistic muscle actuation. Internal forces and couples exerted by all major muscle groups are considered. An energy-shaping control method is described to coordinate muscle activity so as to grasp and reach in three-dimensional space. Key contributions of this article are as follows: (i) modelling of major muscle groups to elicit three-dimensional movements; (ii) a mathematical formulation for muscle activations based on a stored energy function; and (iii) a computationally efficient procedure to design task-specific equilibrium configurations, obtained by solving an optimization problem in the Special Euclidean group SE ( 3 ) . Muscle controls are then iteratively computed based on the co-state variable arising from the solution of the optimization problem. The approach is numerically demonstrated in the physically accurate software environment Elastica . Results of numerical experiments mimicking observed octopus behaviours are reported.

A wireless "Janus" soft gripper with multiple tactile sensors

Biomimetic properties allow soft robots to complexly interact with the environment. As the bridge between the robot and the operating object, the gripping hand is an important organ for its connection with the outside world, which requires the ability to provide feedback from the grasped object, similar to the human sensory and nervous system. In this work, to cope with the difficulty of integrating complex sensing and communication systems into flexible soft grippers, we propose a GO/PI composite bilayer film-based gripper with two types of tactile sensors and a LC passive wireless transmission module to obtain the grip information and transmit it to the processor. The bilayer film structure demonstrates good photothermal driving performance. Pressure and material sensors are located at the tips of the gripper's fingers to acquire tactile information which is wirelessly transmitted to the processor for analysis via the LC circuit. The grasping and feedback of the gripper are presented through an intelligent display system, realizing the wireless interconnection between the robot terminal and processing system, exhibiting broad application potential.

Liquid Metal-Elastomer Composites with Dual-Energy Transmission Mode for Multifunctional Miniature Untethered Magnetic Robots

Miniature untethered robots attract growing interest as they have become more functional and applicable to disruptive biomedical applications recently. Particularly, the soft ones among them exhibit unique merits of compliance, versatility, and agility. With scarce onboard space, these devices mostly harvest energy from environment or physical fields, such as magnetic and acoustic fields and patterned lights. In most cases, one device only utilizes one energy transmission mode (ETM) in powering its activities to achieve programmed tasks, such as locomotion and object manipulation. But real-world tasks demand multifunctional devices that require more energy in various forms. This work reports a liquid metal-elastomer composite with dual-ETM using one magnetic field for miniature untethered multifunctional robots. The first ETM uses the low-frequency (<100 Hz) field component to induce shape-morphing, while the second ETM employs energy transmitted via radio-frequency (20 kHz-300 GHz) induction to power onboard electronics and generate excess heat, enabling new capabilities. These new functions do not disturb the shape-morphing actuated using the first ETM. The reported material enables the integration of electric and thermal functionalities into soft miniature robots, offering a wealth of inspirations for multifunctional miniature robots that leverage developments in electronics to exhibit usefulness beyond self-locomotion.

Reversible Wrinkling Surfaces for Enhanced Grip on Wet/Dry Conditions

Friction is important in material design for robotic systems that need to perform tasks regardless of environmental changes. Generally, robotic systems lose their friction in wet environments and fail to accomplish their tasks. Despite the significance of maintaining friction in dry and wet environments, it is still challenging. Here, we report a smart switching surface, which helps to complete missions in both wet and dry environments. Inspired by the reversible wrinkling mechanism of a human finger, the surface reversibly generates and removes wrinkles to adapt to both environments using volume-changing characteristics of the Nafion film. The switchable surfaces with manipulated wrinkle morphologies via patterns of diverse densities, sizes, and shapes induce a relationship between the wrinkle morphologies and friction: wrinkles on denser and smaller hexagonal patterns generate six times more friction than non-switching flat surfaces in wet environments and a similar amount of friction to the flat surfaces in dry environments. In addition, the wrinkle morphologies according to the patterns are predicted through numerical simulation, which is in good agreement with experimental results. This work presents potential applications in robotic systems that are required to perform in and out of water and paves the way for further understanding of wrinkling dynamics, manipulation, and evolutionary function in skin.

Recent advances in biomimetic soft robotics: fabrication approaches, driven strategies and applications

Compared to traditional rigid-bodied robots, soft robots are constructed using physically flexible/elastic bodies and electronics to mimic nature and enable novel applications in industry, healthcare, aviation, military, etc. Recently, the fabrication of robots on soft matter with great flexibility and compliance has enabled smooth and sophisticated 'multi-degree-of-freedom' 3D actuation to seamlessly interact with humans, other organisms and non-idealized environments in a highly complex and controllable manner. Herein, we summarize the fabrication approaches, driving strategies, novel applications, and future trends of soft robots. Firstly, we introduce the different fabrication approaches to prepare soft robots and compare and systematically discuss their advantages and disadvantages. Then, we present the actuator-based and material-based driving strategies of soft robotics and their characteristics. The representative applications of soft robotics in artificial intelligence, medicine, sensors, and engineering are summarized. Also, some remaining challenges and future perspectives in soft robotics are provided. This work highlights the recent advances of soft robotics in terms of functional material selection, structure design, control strategies and biomimicry, providing useful insights into the development of next-generation functional soft robotics.

A Fast-Responding Electro-Activated Shape Memory Polymer Composite with Embedded 3D Interconnected Graphene Foam

Shape memory polymers (SMPs) have gained increasing attention as intelligent morphing materials. However, due to the inherent electrical insulation and poor thermal conductivity of polymers, deformation and temperature control of SMPs usually require external heating devices, bringing about design inconveniences and fragility of interfaces. Herein, we report a shape memory composite that integrates reliable temperature and shape control functions into the interior. The composite is comprised of resin-based SMP and three-dimensional interconnected graphene foam (3DGF), exhibiting a high recovery rate and thermal/electrical conductivity. With only 0.26 wt% of graphene foam, the composite can improve electrical conductivity by 15 orders of magnitude, thermal conductivity by 180%, tensile strength by 64.8%, and shape recovery speed by 154%. Using a very simple Joule heating scheme, decimeter-sized samples of the composite deformed to their preset shapes in less than 10 s.

Ink-Deposited Transparent Electrochromic Structural Colored Foils

Despite progress in the field of electrochromic devices, developing structural color-tunable photonic systems having both high transparency and flexibility remains challenging. Here, an ink-deposited transparent electrochromic structural colored foil displaying reflective colors, tuned by an integrated heater, is prepared in a single-substrate method. Efficient and homogeneous heating is induced by a gravure printed silver nanowire-based substrate, delivering an electrothermal response upon applying an electrical potential. On top of this flexible, transparent heater, a cholesteric liquid crystal ink is bar-coated and subsequently photopolymerized, yielding a structural colored film that exhibits temperature-responsive color changes. The transparent electrochromic foils appear colorless at room temperature but demonstrate structural color tuning with high optical quality when modifying the electrical potential. Both optical and electrothermal performances were preserved when deforming the foils. Applying the conductive and structural colored inks via the easy processable, continuous methods of gravure printing and bar-coating highlights the potential for scaling up to large-scale stimuli-responsive, transparent optical foils. These transparent structural colored foils can be potentially used for a wide range of photonic devices including smart windows, displays, and sensors and can be directly installed on top of curved, flexible surfaces.

Photothermal Thin Films with Highly Efficient NIR Conversion for Miniaturized Liquid-Crystal Elastomer Actuators

This work presents the development of highly efficient photothermal thin films (PTFs) and the demonstration of their application on miniaturized polymer-based soft actuators. The proposed PTF, which comprises acrylic-based black paint and EGaIn liquid metal (LM) microdroplets, serves as an excellent absorber for efficiently converting near-infrared (NIR) irradiation into heat for actuating liquid-crystal elastomer (LCE) actuators. The introduction of LM microdroplets into the PTFs effectively increases the overall thermal efficiency of PTFs. Miniaturized soft crawlers monolithically integrated with the NIR-driven LCE actuators are also implemented for demonstrating the application of the proposed PTF. The crawler’s locomotion, which is inspired by the rectilinear movement of snakes, is generated with the proposed PTF for inducing the LC-to-isotropic phase transition of the LCEs. The experimental results show that introducing LM microdroplets into the PTF can effectively reduce the thermal time constants of LCE actuators by 70%. Under periodic on/off NIR illumination cycles, the locomotion of crawlers with different dimensions is also demonstrated. The measurement results indicate that the proposed PTF is not only essential for enabling photothermal LCE actuation but also quite efficient and durable for repeated operation.

Electrically driven liquid crystal network actuators

Soft actuators based on liquid crystal networks (LCNs) have aroused great scientific interest for use as stimuli-controlled shape-changing and moving components for robotic devices due to their fast, large, programmable and solvent-free actuation responses. Recently, various LCN actuators have been implemented in soft robotics using stimulus sources such as heat, light, humidity and chemical reactions. Among them, electrically driven LCN actuators allow easy modulation and programming of the input electrical signals (amplitude, phase, and frequency) as well as stimulation throughout the volume, rendering them promising actuators for practical applications. Herein, the progress of electrically driven LCN actuators regarding their construction, actuation mechanisms, actuation performance, actuation programmability and the design strategies for intelligent systems is elucidated. We also discuss new robotic functions and advanced actuation control. Finally, an outlook is provided, highlighting the research challenges faced with this type of actuator.

A High-Fidelity Preparation Method for Liquid Crystal Elastomer Actuators

Three-dimensional (3D) structural actuators based on monodomain liquid crystal elastomers (mLCEs) show a wide range of potential applications. A direct ink writing technique has been developed to print LCE structures. It is still a challenge to print high-precision 3D-mLCE actuators. Here, a method of wet 3D printing combined with freeze-drying is proposed. The coagulation bath is designed to restrain the nascent fiber disturbance of the capillary wave and weight by adjusting the ink viscosity and printing speed to control the LC molecular order, enabling uniform (B = 1.02) fibers with a high degree of orientational alignment (S = 0.45) of the mesogens. Furthermore, dynamic disulfide bond formation was used as the cross-linking point, which can allow the LCE network structure to be continuously cured to ensure adjacent layers are effectively bonded and, in combination with freeze-drying, produce the 3D-mLCE actuators of fidelity architecture (98.37 vol %) by printing. The actuators have excellent actuating strain (45.12%), and the dynamic disulfide bond makes them programmable. Finally, a printed bionic starfish and a printed bionic hand can easily grab regular and irregular objects. This work provides a feasible scheme for fabricating complex 3D-mLCEs with reversible changes in shape.

DNA Hydrogels in the Perspective of Mechanical Properties

Tailoring the mechanical properties has always been a key to the field of hydrogels in terms of different applications. Particularly, deoxyribonucleic acid (DNA) hydrogels offer an unambiguous way to precisely tune the mechanical properties, largely on account of their programmable sequences, abundant responding toolbox, and various ligation approaches. In this review, DNA hydrogels from the perspective of mechanical properties, from synthetic standpoint to different applications are introduced. The relationship between the structure and their mechanical properties in DNA hydrogels and the methods of regulating the mechanical properties of DNA hydrogels are specifically summarized. Furthermore, several recent applications of DNA hydrogels in relation to their mechanical properties are discussed. Benefiting from the tunability and flexibility, rational design of mechanical properties in DNA hydrogels provided unheralded interest from fundamental science to extensive applications. This article is protected by copyright. All rights reserved.

A Scientometric Review of Soft Robotics: Intellectual Structures and Emerging Trends Analysis (2010–2021)

Within the last decade, soft robotics has attracted an increasing attention from both academia and industry. Although multiple literature reviews of the whole soft robotics field have been conducted, there still appears to be a lack of systematic investigation of the intellectual structure and evolution of this field considering the increasing amount of publications. This paper conducts a scientometric review of the progressively synthesized network derived from 10,504 bibliographic records using a topic search on soft robotics from 2010 to 2021 based on the Web of Science (WoS) core database. The results are presented from both the general data analysis of included papers (e.g., relevant journals, citation, h-index, year, institution, country, disciplines) and the specific data analysis corresponding to main disciplines and topics, and more importantly, emerging trends. CiteSpace, a data visualization software, which can construct the co-citation network maps and provide citation bursts, is used to explore the intellectual structures and emerging trends of the soft robotics field. In addition, this paper offers a demonstration of an effective analytical method for evaluating enormous publication citation and co-citation data. Findings of this review can be used as a reference for future research in soft robotics and relevant topics.

Soft robotic origami crawler

Biomimetic soft robotic crawlers have attracted extensive attention in various engineering fields, owing to their adaptivity to different terrains. Earthworm-like crawlers realize locomotion through in-plane contraction, while inchworm-like crawlers exhibit out-of-plane bending-based motions. Although in-plane contraction crawlers demonstrate effective motion in confined spaces, miniaturization is challenging because of limited actuation methods and complex structures. Here, we report a magnetically actuated small-scale origami crawler with in-plane contraction. The contraction mechanism is achieved through a four-unit Kresling origami assembly consisting of two Kresling dipoles with two-level symmetry. Magnetic actuation is used to provide appropriate torque distribution, enabling a small-scale and untethered robot with both crawling and steering capabilities. The crawler can overcome large resistances from severely confined spaces by its anisotropic and magnetically tunable structural stiffness. The multifunctionality of the crawler is explored by using the internal cavity of the crawler for drug storage and release. The magnetic origami crawler can potentially serve as a minimally invasive device for biomedical applications.

Programming Soft Shape-Morphing Systems by Harnessing Strain Mismatch and Snap-Through Bistability: A Review

Multi-modal and controllable shape-morphing constitutes the cornerstone of the functionalization of soft actuators/robots. Involving heterogeneity through material layout is a widely used strategy to generate internal mismatches in active morphing structures. Once triggered by external stimuli, the entire structure undergoes cooperative deformation by minimizing the potential energy. However, the intrinsic limitation of soft materials emerges when it comes to applications such as soft actuators or load-bearing structures that require fast response and large output force. Many researchers have explored the use of the structural principle of snap-through bistability as the morphing mechanisms. Bistable or multi-stable mechanical systems possess more than one local energy minimum and are capable of resting in any of these equilibrium states without external forces. The snap-through motion could overcome energy barriers to switch among these stable or metastable states with dramatically distinct geometries. Attributed to the energy storage and release mechanism, such snap-through transition is quite highly efficient, accompanied by fast response speed, large displacement magnitude, high manipulation strength, and moderate driving force. For example, the shape-morphing timescale of conventional hydrogel systems is usually tens of minutes, while the activation time of hydrogel actuators using the elastic snapping instability strategy can be reduced to below 1 s. By rationally embedding stimuli-responsive inclusions to offer the required trigger energy, various controllable snap-through actuations could be achieved. This review summarizes the current shape-morphing programming strategies based on mismatch strain induced by material heterogeneity, with emphasis on how to leverage snap-through bistability to broaden the applications of the shape-morphing structures in soft robotics and mechanical metamaterials.

Design, Regulation, and Applications of Soft Actuators Based on Liquid-Crystalline Polymers and Their Composites

Soft actuators designed from stimuli-responsive polymers often possess a certain amount of bionic functionality because of their versatile deformation. Liquid-crystalline polymers (LCPs) and their composites are among the most fascinating materials for soft actuators due to their great advantages of flexible structure design and easy regulation. In this Spotlight on Applications, we mainly focus on our group's latest research progress in soft actuators based on LCPs and their composites. Some representative research findings from other groups are also included for a better understanding of this research field. Above all, the essential principles for the responsive behavior and reconfigurable performance of the soft actuators are discussed, from the perspective of material morphology and structure design. Further on, we analyze recent work on how to precisely regulate the responsive modes and quantify the operating parameters of soft actuators. Finally, some application examples are given to demonstrate well-designed soft actuators with different functions under varied working environments, which is expected to provide inspiration for future research in developing more intelligent and multifunctional integrated soft actuators.

Electrically Controlled Aquatic Soft Actuators with Desynchronized Actuation and Light-Mediated Reciprocal Locomotion

Soft-bodied aquatic invertebrates can overcome hydrodynamic resistance and display diverse locomotion modes in response to environmental cues. Exploring the dynamics of locomotion from bioinspired aquatic actuators will broaden the perspective of underwater manipulation of artificial systems in fluidic environments. Here, we report a multilayer soft actuator design based on a light-driven hydrogel and a laser-induced graphene (LIG) actuator, minimizing the effect of the time delay by a monolithic hydrogel-based system while maintaining shape-morphing functionality. Moreover, different time scales in the response of actuator materials enable a real-time desynchronization of energy inputs, holding great potential for applications requiring desynchronized stimulation. This hybrid design principle is ultimately demonstrated with a high-performance aquatic soft actuator possessing an underwater walking speed of 0.81 body length per minute at a relatively low power consumption of 3 W. When integrated with an optical sensor, the soft actuator can sense the variation in light intensity and achieve mediated reciprocal motion. Our proposed locomotion mechanism could inspire other multilayer soft actuators to achieve underwater functionalities at the same spatiotemporal scale. The underwater actuation platform could be used to study locomotion kinematics and control mechanisms that mimic the motion of soft-bodied aquatic organisms.

A Shift from Efficiency to Adaptability: Recent Progress in Biomimetic Interactive Soft Robotics in Wet Environments

Research field of soft robotics develops exponentially since it opens up many imaginations, such as human-interactive robot, wearable robots, and transformable robots in unpredictable environments. Wet environments such as sea and in vivo represent dynamic and unstructured environments that adaptive soft robots can reach their potentials. Recent progresses in soft hybridized robotics performing tasks underwater herald a diversity of interactive soft robotics in wet environments. Here, the development of soft robots in wet environments is reviewed. The authors recapitulate biomimetic inspirations, recent advances in soft matter materials, representative fabrication techniques, system integration, and exemplary functions for underwater soft robots. The authors consider the key challenges the field faces in engineering material, software, and hardware that can bring highly intelligent soft robots into real world.