Construction of Infrared-Light-Responsive Photoinduced Carriers Driver for Enhanced Photocatalytic Hydrogen Evolution

Molecularly Tunable Heterostructured Co-Polymers Containing Electron-Deficient and -Rich Moieties for Visible-Light and Sacrificial-Agent-Free H2O2 Photosynthesis

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C-H arylation and Knoevenagel polymerization reactions for visible-light and sacrificial-agent-free H2O2 synthesis. The subsequent copolymerization of the electron-deficient benzodithiophene-4,8-dione (BTD) and the electron-rich biphenyl (B) and p-phenylenediacetonitrile (CN) not only expands the π-conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB-CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g-1 h-1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs-TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one-electron pathway and the mutual conversion between C=O and C-OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts.

Novel photocatalytic carbon dots: efficiently inhibiting amyloid aggregation and quickly disaggregating amyloid aggregates

Amyloid aggregation is implicated in the pathogenesis of various neurodegenerative disorders, such as Alzheimer's disease (AD) and Parkinson's disease (PD). It is critical to develop high-performance drugs to combat amyloid-related diseases. Most identified nanomaterials exhibit limited biocompatibility and therapeutic efficacy. In this work, we used a solvent-free carbonization process to prepare new photo-responsive carbon nanodots (CNDs). The surface of the CNDs is densely packed with chemical groups. CNDs with large, conjugated domains can interact with proteins through π-π stacking and hydrophobic interactions. Furthermore, CNDs possess the ability to generate singlet oxygen species (1O2) and can be used to oxidize amyloid. The hydrophobic interaction and photo-oxidation can both influence amyloid aggregation and disaggregation. Thioflavin T (ThT) fluorescence analysis and circular dichroism (CD) spectroscopy indicate that CNDs can block the transition of amyloid from an α-helix structure to a β-sheet structure. CNDs demonstrate efficacy in alleviating cytotoxicity induced by Aβ42 and exhibit promising blood-brain barrier (BBB) permeability. CNDs have small size, low biotoxicity, good fluorescence and photocatalytic properties, and provide new ideas for the diagnosis and treatment of amyloid-related diseases.

Tuning Surface Electronics State of P-Doped In2.77S4/In(OH)3 toward Efficient Photoelectrochemical Water Oxidation

Indium sulfide with a two-dimensional layered structure offers a platform for catalyzing water oxidation by a photoelectrochemical process. However, the limited hole holders hinder the weak intrinsic catalytic activity. Here, the nonmetallic phosphorus atom is coordinated to In2.77S4/In(OH)3 through a bridge-bonded sulfur atom. By substituting the S position by the P dopant, the work function (surface potential) is regulated from 445 to 210 mV, and the lower surface potential is shown to be beneficial for holding the photogenerated holes. In2.77S4/In(OH)3/P introduces a built-in electric field under the difference of Fermi energy, and the direction is from the bulk to the surface. This band structure results in upward band bending at the interface of In2.77S4/In(OH)3 and P-doped sites, which is identified by density functional theory calculations (∼0.8 eV work function difference). In2.77S4/In(OH)3/P stands out with the highest oxidation efficiency (ηoxi = 70%) and charge separation efficiency (ηsep = 69%). Importantly, it delivers a remarkable water oxidation photocurrent density of 2.51 mA cm-2 under one sun of illumination.

Facile synthesis of Zn0.5Cd0.5S nanosheets with tunable S vacancies for highly efficient photocatalytic hydrogen evolution

In order to effectively improve the separation efficiency of photogenerated charge carriers and thus the photocatalytic activity, in this work, porous Zn0.5Cd0.5S nanosheets with a controlled amount of S vacancies were prepared by a multistep chemical transformation strategy using the inorganic-organic hybrid ZnS-ethylenediamine (denoted as ZnS(en)0.5) as a hard template. The amount of S vacancies and the morphology of the Zn0.5Cd0.5S nanostructures were tailored by adjusting the hydrolysis time. Furthermore, we report the observation of S vacancies in porous Zn0.5Cd0.5S nanosheets at the atomic level using spherical aberration-corrected (Cs-aberrated) transmission electron microscopy (Cs-corrected-TEM). The results revealed that Zn0.5Cd0.5S nanosheets with S vacancies absorb more visible light and generate more electron-hole carriers due to their porous nanosheet structure. At the same time, sulfur vacancies are introduced into the Zn0.5Cd0.5S nanosheets to capture the electrons generated by the light and further extend the lifetime of the carriers. As expected, the photocatalytic activity of Zn0.5Cd0.5S nanosheets prepared by 4 h hydrolysis is 20.5 times higher than that of Zn0.5Cd0.5S(en)x intermediates. Moreover, Zn0.5Cd0.5S-4h showed excellent cycling stability. This work provides a new strategy for the optimization of Zn0.5Cd0.5S photocatalysts to improve photocatalytic hydrogen evolution.

Spin Polarization: A New Frontier in Efficient Photocatalysis for Environmental Purification and Energy Conversion

As a promising strategy to improve photocatalytic efficiency, spin polarization has attracted enormous attention in recent years, which could be involved in various steps of photoreaction. The Pauli repulsion principle and the spin selection rule dictate that the behavior of two electrons in a spatial eigenstate is based on their spin states, and this fact opens up a new avenue for manipulating photocatalytic efficiency. In this review, recent advances in modulating the photocatalytic activity with spin polarization are systematically summarized. Fundamental insights into the influence of spin-polarization effects on photon absorption, carrier separation, and migration, and the behaviors of reaction-related substances from the photon uptake to reactant desorption are highlighted and discussed in detail, and various photocatalytic applications for environmental purification and energy conversion are presented. This review is expected to deliver a timely overview of the recent developments in spin-polarization-modulated photocatalysis for environmental purification and energy conversion in terms of their practical applications.

Manipulation of interfacial charge dynamics for metal-organic frameworks toward advanced photocatalytic applications

Compared to other known materials, metal-organic frameworks (MOFs) have the highest surface area and the lowest densities; as a result, MOFs are advantageous in numerous technological applications, especially in the area of photocatalysis. Photocatalysis shows tantalizing potential to fulfill global energy demands, reduce greenhouse effects, and resolve environmental contamination problems. To exploit highly active photocatalysts, it is important to determine the fate of photoexcited charge carriers and identify the most decisive charge transfer pathway. Methods to modulate charge dynamics and manipulate carrier behaviors may pave a new avenue for the intelligent design of MOF-based photocatalysts for widespread applications. By summarizing the recent developments in the modulation of interfacial charge dynamics for MOF-based photocatalysts, this minireview can deliver inspiring insights to help researchers harness the merits of MOFs and create versatile photocatalytic systems.

Significant hydrogen generation via photo-mechanical coupling in flexible methylammonium lead iodide nanowires

The flexoelectric effect, which refers to the mechanical-electric coupling between strain gradient and charge polarization, should be considered for use in charge production for catalytically driving chemical reactions. We have previously revealed that halide perovskites can generate orders of higher magnitude flexoelectricity under the illumination of light than in the dark. In this study, we report the catalytic hydrogen production by photo-mechanical coupling involving the photoflexoelectric effect of flexible methylammonium lead iodide (MAPbI3) nanowires (NWs) in hydrogen iodide solution. Upon concurrent light illumination and mechanical vibration, large strain gradients were introduced in flexible MAPbI3 NWs, which subsequently induced significant hydrogen generation (at a rate of 756.5 μmol g-1 h-1, surpassing those values from either photo- or piezocatalysis of MAPbI3 nanoparticles). This photo-mechanical coupling strategy of mechanocatalysis, which enables the simultaneous utilization of multiple energy sources, provides a potentially new mechanism in mechanochemistry for highly efficient hydrogen production.

Photothermally driven decoupling of gas evolution at the solid-liquid interface for boosted photocatalytic hydrogen production

The slow mass transfer, especially the gas evolution process at the solid-liquid interface in photocatalytic water splitting, restricts the overall efficiency of the hydrogen evolution reaction. Here, we report a novel gas-solid photocatalytic reaction system by decoupling hydrogen generation from a traditional solid-liquid interface. The success relies on annealing commercial melamine sponge (AMS) for effective photothermal conversion that leads to rapid water evaporation. The vapor flows towards the photocatalyst covering the surface of the AMS and is split by the catalyst therein. This liquid-gas/gas-solid coupling system avoids the formation of photocatalytic bubbles at the solid-liquid interface, leading to significantly improved mass transfer and conversion. Utilizing CdS nanorods anchored by highly dispersed nickel atoms/clusters as a model photocatalyst, the highest hydrogen evolution rate from water splitting reaches 686.39 μmol h-1, which is 5.31 times that of the traditional solid-liquid-gas triphase system. The solar-to-hydrogen (STH) efficiency can be up to 2.06%. This study provides a new idea for the design and construction of efficient practical photocatalytic systems.

Infrared light induced sustainable enhancement of photocatalytic efficiency by thermoelectric effect

Hindering the recombination of photoinduced electron-hole pairs is of significance for enhancing photocatalytic performance. Applying a voltage to separate carriers offers an option to realize it. Thermoelectric materials own the ability to continuously sustain a voltage when a temperature difference exists between its two sides. However, maintaining the thermoelectric effect without wasting additional energy remains a challenge. Herein, a C3N4/Polyaniline/Poly(vinylidene fluoride) cilia array was fabricated to reach efficient photocatalysis through thermoelectric effect and photothermal effect. The cilia array structure offers more than 40% of light absorbance compared to the film. Hence, the infrared light in sunlight, which was usually omitted in photocatalysis, was transformed into heat. Through the unique design which draws upon the huge difference in thermal conductivity of air and water, a temperature gap was formed between the top and bottom sides of the cilia array by half-submerging it in water. Therefore, the photocatalytic efficiency was improved by 84.4%. This work achieves an energy-saving method to enhance photocatalytic performance by activating thermoelectric effect through infrared light, shedding light on the application of multi-modes enhanced photocatalysis.

Fabrication of Co3O4@ZnIn2S4 for photocatalytic hydrogen evolution: Insights into the synergistic mechanism of photothermal effect and heterojunction

Integration of photothermal materials and photocatalysts can effectively improve photocatalytic hydrogen production. However, the synergistic mechanism of photothermal effect and heterojunction still need to be deeply investigated. Herein, Co3O4@ZnIn2S4 (ZIS) core-shell heterojunction was constructed as a photothermal/ photocatalytic integrated system for photocatalytic hydrogen production. The photothermal effect induced by Co3O4 boosts the surface reaction kinetic of hydrogen evolution with an apparent activation energy decrease from 42.0 kJ⋅mol-1 to 33.5 kJ⋅mol-1. The photothermal effect also increases the charge concentrations of Co3O4@ZIS, which ameliorates the conductivity of Co3O4@ZIS and thus benefits to charge transfer. In addition, a p-n junction forms between Co3O4 and ZIS and provides a built-in electric field to enhance charge separate and prolong charge life time. Benefiting from the synergy of photothermal effect and heterojunction, the photocatalytic performance of Co3O4@ZIS is significantly improved with a highest hydrogen evolution rate of 4515 μmol⋅g-1⋅h-1, which is about 3.5 times higher than that of pure ZIS. This work offers a full perspective to understand the photothermal/photocatalytic integrated conception for solar hydrogen production.

Non-Lignin Constructing the Gas-Solid Interface for Enhancing the Photothermal Catalytic Water Vapor Splitting

The progress of solar-driven water-splitting technology has been impeded by the limited light response capability of semiconductor materials. Despite attempts to leverage nearly 50% of infrared radiation for photothermal synergy and catalytic reaction enhancement, heat loss during liquid phase reactions results in low energy conversion efficiency. Here, the photothermally driven catalytic water-splitting system, which designs K-SrTiO3 -loaded TiN silica wool at the water-air interface. Photocatalytic tests and density functional theory calculations demonstrate that the thermal effect transforms liquid water into water vapor, thereby reducing the reaction free energy of catalysts and improving the transmission rate of catalytic products. Hence, the hydrogen evolution rate reaches 275.46 mmol m-2  h-1 , and the solar-to-hydrogen (STH) efficiency is 1.81% under 1 sun irradiation in this gas-solid system, which is more than twice that of liquid water splitting. This novel photothermal catalytic pathway, which involves a coupled reaction of water evaporation and water splitting, is anticipated to broaden the utilization range of the solar spectrum and significantly enhance the conversion efficiency of STH.

Nanocomposites of Cu2O with plasmonic metals (Au, Ag): design, synthesis, and photocatalytic applications

Metal-semiconductor nanocomposites have been utilized in a multitude of applications in a wide array of fields, prompting substantial interest from different scientific sectors. Of particular interest are semiconductors paired with plasmonic metals due to the unique optical properties that arise from the individual interactions of these materials with light and the intercomponent movement of charge carriers in their heterostructure. This review focuses on the pairing of Cu2O semiconductor with strongly plasmonic metals, particularly Au and Ag. The design and synthesis of Au-Cu2O and Ag-Cu2O nanostructures, along with ternary nanostructures composed of the three components, are described, with in-depth discussion on the synthesis techniques and tunable parameters. The effects of compositing on the optical and electronic properties of the nanocomposites in the context of photocatalysis are discussed as well. Concluding remarks and potential areas for exploration are presented in the last section.

In Situ Fabrication of a 2D/2D MXene/CN Heterojunction for Photothermally Assisted Photocatalytic Sterilization under Visible Light Irradiation

Constructing an efficient visible light-responsive antibacterial material for water treatment remains a principal goal yet is a huge challenge. Herein, a 2D/2D heterojunction composite with robust interfacial contact, named MXene/CN (MCN), was controllably fabricated by using a urea molecule intercalated into MXene following an in situ calcination method, which can realize the rapid separation and migration of photogenerated carriers under visible light irradiation and significantly improve the carrier concentration of the MXene surface, thus generating more reactive oxygen species. The generation of heat induced by MXene could also increase photogenic electron activity to facilitate the photocatalytic reaction using in situ time-resolved photoluminescence characterization. The visible light-activated germicide exhibits a sterilization efficacy against Escherichia coli of 99.70%, higher than those of pure CN (60.21%) and MXene (31.75%), due to the effect of photothermally assisted photocatalytic treatment. This work is an attempt to construct a visible light-driven antimicrobial material using Schottky junctions achieving photothermally assisted photocatalytic disinfection.

Photoelectron "Bridge" in Van Der Waals Heterojunction for Enhanced Photocatalytic CO2 Conversion Under Visible Light

Constructing Van der Waals heterojunction is a crucial strategy to achieve excellent photocatalytic activity. However, in most Van der Waals heterojunctions synthesized by ex situ assembly, electron transfer encounters huge hindrances at the interface between the two components due to the large spacing and potential barrier. Herein, a phosphate-bridged Van der Waals heterojunction of cobalt phthalocyanine (CoPc)/tungsten disulfide (WS2 ) bridged by phosphate (xCoPc-nPO4 - -WS2 ) is designed and prepared by the traditional wet chemistry method. By introducing a small phosphate molecule into the interface of CoPc and WS2 , creates an electron "bridge", resulting in a compact combination and eliminating the space barrier. Therefore, the phosphate (PO4 - ) bridge can serve as an efficient electron transfer channel in heterojunction and can efficiently transmit photoelectrons from WS2 to CoPc under excited states. These excited photoelectrons are captured by the catalytic central Co2+ in CoPc and subsequently convert CO2 molecules into CO and CH4 products, achieving 17-fold enhancement on the 3CoPc-0.6PO4 - -WS2 sample compared to that of pure WS2 . Introducing a small molecule "bridge" to create an electron transfer channel provides a new perspective in designing efficient photocatalysts for photocatalytic CO2 reduction into valuable products.

Electric double layer-mediated polarization field for optimizing photogenerated carrier dynamics and thermodynamics

Photocatalytic hydrogen evolution efficiency is limited due to unfavorable carrier dynamics and thermodynamic performance. Here, we propose to introduce electronegative molecules to build an electric double layer (EDL) to generate a polarization field instead of the traditional built-in electric field to improve carrier dynamics, and optimize the thermodynamics by regulating the chemical coordination of surface atoms. Based on theoretical simulation, we designed CuNi@EDL and applied it as the cocatalyst of semiconductor photocatalysts, finally achieved a hydrogen evolution rate of 249.6 mmol h^-1 g^-1 and remained stable after storing under environmental conditions for more than 300 days. The high H₂ yield is mainly due to the perfect work function, Fermi level and Gibbs free energy of hydrogen adsorption, improved light absorption ability, enhanced electron transfer dynamics, decreased HER overpotential and effective carrier transfer channel arose by EDL. Here, our work opens up new perspectives for the design and optimization of photosystems.

Integrated Coupling Utilization of the Solar Full Spectrum for Promoting Water Splitting Activity over a CIZS Semiconductor

Most of the existing photocatalysts can only use ultraviolet light and part of visible light, so broadening the spectrum response range and realizing the full spectrum coverage are key measures to improve the solar-to-hydrogen (STH) efficiency of photocatalytic water splitting. A spatially separated photothermal coupled photocatalytic (PTC) reaction system was designed using carbonized melamine foam (C-MF) as a substrate to absorb visible and infrared light and Cu_0.04In_0.25ZnS_y@Ru (CIZS@Ru) as a photocatalyst to absorb UV-visible light (UV-vis). By comparing the three modes of bottom, liquid level, and self-floating, it is found that the surface temperature of the system has a significant effect on the hydrogen evolution activity. The monochromatic light and activation energy experiments verify that the enhancement of photocatalytic activity comes from the strengthened photothermal effect of the substrate. Combined with theoretical calculations, it is further confirmed that the introduction of photothermal materials provides additional kinetic energy for carrier transmission and promotes directional carrier transmission efficiency. Based on the photoenergy-thermal integrated catalytic strategy, the hydrogen production rate reaches 603 mmol h^-1 m^-2. The structural design of photocatalysis has potential application in the field of photoenergy-fuel conversion.

Fabrication of CdLa2S4@La(OH)3@Co3S4 Z-scheme heterojunctions with dense La, S-dual defects for robust photothermal assisted photocatalytic performance

Optimize the separation and transport mechanism of photogenerated carriers in heterojunction composites, and make full use of the active sites of each material are key factors to enhance photocatalytic activity. Herein, we successfully synthesize defective CdLa₂S₄@La(OH)₃@Co₃S₄ (CLS@LOH@CS) Z-scheme heterojunction photocatalysts through a facile solvothermal method, which show broad-spectrum absorption and excellent photocatalytic activity. La(OH)₃ nanosheets not only greatly increase the specific surface area of photocatalyst, but also can be coupled with CdLa₂S₄ (CLS) and form Z-scheme heterojunction by converting irradiation light. In addition, Co₃S₄ with photothermal properties is obtained by in-situ sulfurization method, which can release heat to improve the mobility of photogenerated carriers, and also be used as a cocatalyst for hydrogen production. Most importantly, the formation of Co₃S₄ leads to a large number of sulfur vacancy defects in CLS, and thus improving the separation efficiency of photogenerated electrons and holes, and increasing the catalytic active sites. Consequently, the maximum hydrogen production rate of CLS@LOH@CS heterojunctions can reach 26.4 mmol g^-1h^-1, which is 293 times than pristine CLS (0.09 mmol g^-1h^-1). This work will provide a new horizon for synthesizing high efficiency heterojunction photocatalysts through switching the separation and transport modes of photogenerated carrier.

Low-Energy Photons Dual Harvest for Photocatalytic Hydrogen Evolution: Bimodal Surface Plasma Resonance Related Synergism of Upconversion and Pyroelectricity

Utilization of low-energy photons for efficient photocatalysis remains a challenging pursuit. Herein, a strategy is reported to boost the photocatalytic performance, by promoting low-energy photons dual harvest through bimodal surface plasmon resonance (SPR)-enhanced synergistically upconversion and pyroelectricity. It is achieved by introducing triplet-triplet annihilation upconversion (TTA-UC) materials and plasmonic material (Au nanorods, AuNRs) into composite fibers composed of pyroelectric substrate (poly(vinylidene fluoride)) and photocatalyst Cd_0.5 Zn_0.5 S. Interestingly, the dual combination of TTA-UC and AuNRs SPR in the presence of polyvinylidene fluoride substrate with pyroelectric property promotes the photocatalytic hydrogen evolution performance by 2.88 folds with the highest average apparent quantum yield of 7.0% under the low-energy light (λ > 475 nm), which far outweighs the role of separate application of TTA-UC (34%) and AuNRs SPR (76%). The presence of pyroelectricity plays an important role in the built-in electric field as well as the accordingly photogenerated carrier behavior in the composite photocatalytic materials, and the pyroelectricity can be affected by AuNRs with different morphologies, which is proved by the Kelvin probe force microscopy and photocurrent data. This work provides a new avenue for fully utilizing low-energy photons in the solar spectrum for improving photocatalytic performance.

Enhancement of Charge Separation and NIR Light Harvesting through Construction of 2D-2D Bi4 O5 I2 /BiOBr:Yb3+ , Er3+ Z-Scheme Heterojunctions for Improved Full-Spectrum Photocatalytic Performance

Developing full-spectrum photocatalysts with simultaneous broadband light absorption, excellent charge separation, and high redox capabilities is becoming increasingly significant. Herein, inspired by the similarities in crystalline structures and compositions, a unique 2D-2D Bi₄ O₅ I₂ /BiOBr:Yb³⁺ ,Er³⁺ (BI-BYE) Z-scheme heterojunction with upconversion (UC) functionality is successfully designed and fabricated. The co-doped Yb³⁺ and Er³⁺ harvest near-infrared (NIR) light and then convert it into visible light via the UC function, expanding the optical response range of the photocatalytic system. The intimate 2D-2D interface contact provides more charge migration channels and enhances the Förster resonant energy transfer of BI-BYE, leading to significantly improved NIR light utilization efficiency. Density functional theory (DFT) calculations and experimental results confirm that the Z-scheme heterojunction is formed and that this heterojunction endows the BI-BYE heterostructure with high charge separation and strong redox capability. Benefit from these synergies, the optimized 75BI-25BYE heterostructure exhibits the highest photocatalytic performance for Bisphenol A (BPA) degradation under full-spectrum and NIR light irradiation, outperforming BYE by 6.0 and 5.3 times, respectively. This work paves an effective approach for designing highly efficient full-spectrum responsive Z-scheme heterojunction photocatalysts with UC function.

Photothermal-enabled single-atom catalysts for high-efficiency hydrogen peroxide photosynthesis from natural seawater

Hydrogen peroxide (H₂O₂) is a powerful industrial oxidant and potential carbon-neutral liquid energy carrier. Sunlight-driven synthesis of H₂O₂ from the most earth-abundant O₂ and seawater is highly desirable. However, the solar-to-chemical efficiency of H₂O₂ synthesis in particulate photocatalysis systems is low. Here, we present a cooperative sunlight-driven photothermal-photocatalytic system based on cobalt single-atom supported on sulfur doped graphitic carbon nitride/reduced graphene oxide heterostructure (Co-CN@G) to boost H₂O₂ photosynthesis from natural seawater. By virtue of the photothermal effect and synergy between Co single atoms and the heterostructure, Co-CN@G enables a solar-to-chemical efficiency of more than 0.7% under simulated sunlight irradiation. Theoretical calculations verify that the single atoms combined with heterostructure significantly promote the charge separation, facilitate O₂ absorption and reduce the energy barriers for O₂ reduction and water oxidation, eventually boosting H₂O₂ photoproduction. The single-atom photothermal-photocatalytic materials may provide possibility of large-scale H₂O₂ production from inexhaustible seawater in a sustainable way.

Copper-doped perylene diimide supramolecules combined with TiO2 for efficient photoactivity

Designing organic-inorganic hybrid semiconductors is an effective strategy for improving the performance of the photocatalyst under visible light irradiation. In this experiment, we firstly introduced Cu into perylenediimide supramolecules (PDIsm) to prepare the novel Cu-dopped PDIsm (CuPDIsm) with one-dimensional structure and then incorporated CuPDIsm with TiO₂ to improve the photocatalytic performance. The introduction of Cu in PDIsm increases both the visible light adsorption and specific surface areas. Cu²⁺ coordination link between adjacent perylenediimide (PDI) moleculars and H-type π-π stacking of the aromatic core greatly accelerate the electron transfer in CuPDIsm system. Moreover, the photo-induced electrons generated by CuPDIsm migrate to TiO₂ nanoparticles through hydrogen bond and electronic coupling at the TiO₂/CuPDIsm heterojunction, which further accelerates the electron transfer and the separation efficiency of the charge carriers. So, the TiO₂/CuPDIsm composites exhibit excellent photodegradation activity under visible light irradiation, reaching the maximum values of 89.87 and 97.26% toward tetracycline and methylene blue, respectively. This study provides new prospects for the development of metal-dopping organic systems and the construction of inorganic-organic heterojunctions, which can effectively enhance the electron transfer and improve the photocatalytic performance.

Recent Advances in Efficient Photocatalysis via Modulation of Electric and Magnetic Fields and Reactive Phase Control

The past several years has witnessed significant progress in enhancing photocatalytic performance via robust electric and magnetic fields' modulation to promote the separation and transfer of photoexcited carriers, and phase control at reactive interface to lower photocatalytic reaction energy barrier and facilitate mass transfer. These three research directions have received soaring attention in photocatalytic field. Herein, recent advances in photocatalysis modulated by electric field (i.e., piezoelectric, pyroelectric, and triboelectric fields, as well as their coupling) with specific examples and mechanisms discussion are first examined. Subsequently, the strategy via magnetic field manipulation for enhancing photocatalytic performance is scrutinized, including the spin polarization, Lorentz force, and magnetoresistance effect. Afterward, materials with tailored structure and composition design enabled by reactive phase control and their applications in photocatalytic hydrogen evolution and carbon dioxide reduction are reviewed. Finally, the challenges and potential opportunities to further boost photocatalytic efficiency are presented, aiming at providing crucial theoretical and experimental guidance for those working in photocatalysis, ferroelectrics, triboelectrics, piezo-/pyro-/tribo-phototronics, and electromagnetics, among other related areas.

Influences of Partial Destruction of Ti-MOFs on Photo(electro)catalytic H2 Evolution by Dominating Role of Charge Carrier Trapping over Surface Area

The design of water-stable photo and electrocatalysts of metal-organic frameworks (MOFs) for its promising catalytic applications at long-term irradiations or persisted current loads is extremely necessary but still remains as challenging. A limited number of reports on Ti-MOF-based catalysts for water splitting are only available to explain and understand the correlation between the nature of materials and MOFs array. Herein, spherical Ti-MOFs and corresponding partially annealed hollow core-shell Ti-MOFs (Ti-MOF/D) are designed and the correlation with their photo(electro)catalytic water splitting performance is evaluated. The switchable valence state of Ti for the Ti-MOF as a function of molecular bonding is the possible reason behind the observed photocatalytic hydrogen generation and light-harvesting ability of the system. Besides, the defect state, solid core-shell mesoporous structure, and active sites of Ti-MOF help to trap the charge carriers and the reduction of the recombination process. This phenomenon is absent for hollow core-shells Ti-MOF/D spheres due to the rigid TiO₂ outer surface although there is a contradiction in surface area with Ti-MOF. Considering the diversity of Ti-MOF and Ti-MOF/D, further novel research can be designed using this way to manipulate their properties as per the requirements.

The enhanced photocatalytic and photothermal effects of Ti3C2 Mxene quantum dot/macroscopic porous graphitic carbon nitride heterojunction for Hydrogen Production

A new heterostructure between Ti₃C₂ MXene quantum dot and 3D macroscopic porous graphitic carbon nitride (PGCN) was successfully obtained by integrating Ti₃C₂ quantum dots onto porous graphitized carbon nitride (Ti₃C₂QDs/PGCN) using in situ electrostatic self-assembly techniques. The photocatalytic H₂ evolution rate of optimized 5.5 wt% Ti₃C₂ QD/PGCN composites is nearly 15.24 and 3.53 times higher than pristine CN, and PGCN, respectively. Ti₃C₂ quantum dots can significantly enhance the hydrogen production activity of PGCN. In addition, their good photothermal conversion ability accelerates the overall reaction process and enhances the light absorption and carrier density. Furthermore, to elucidate the photocatalytic mechanism, a series of tests involving electron spin resonance (ESR) and density functional theory (DFT) calculations were performed. The results confirmed that the Schottky barrier between PGCN and Ti₃C₂ QD can effectively promote spatial charge separation and significantly improve the photocatalytic performance. This work provides a new approach for the construction of photocatalytic systems and the application of MXene QD.

More Accurate Method for Evaluating the Activity of Photocatalytic Hydrogen Evolution and Its Reaction Kinetics Equation

Photocatalytic water splitting to hydrogen is a sustainable energy conversion method. However, there is a lack of sufficiently accurate measurement methods for an apparent quantum yield (AQY) and a relative hydrogen production rate (r_H2) at the moment. Thus, a more scientific and reliable evaluation method is highly required to allow the quantitative comparison of photocatalytic activity. Herein, a simplified kinetic model of photocatalytic hydrogen evolution was established, the corresponding photocatalytic kinetic equation was deduced, and a more accurate calculation method is proposed for the AQY and the maximum hydrogen production rate v_H2,max. At the same time, new physical quantities, absorption coefficient k_L and specific activity SA, were proposed to sensitively characterize the catalytic activity. The scientificity and practicality of the proposed model and the physical quantities were systematically verified from the theoretical and experimental levels.

Bioinspired Strategy for Efficient TiO2/Au/CdS Photocatalysts Based On Mesocrystal Superstructures in Biominerals and Charge-Transfer Pathway in Natural Photosynthesis

Natural photosynthesis involves an efficient charge-transfer pathway through exquisitely arranged photosystems and electron transport intermediates, which separate photogenerated carriers to realize high quantum efficiency. It inspires a rational design construction of artificial photosynthesis systems and the architectures of semiconductors are essential to achieve optimal performance. Of note, biomineralization processes could form various mesocrystals with well-ordered superstructures for unique optical applications. Inspired by both natural photosynthesis and biomineralization, we construct a ternary superstructure-based mesocrystal TiO₂ (meso-TiO₂)/Au/CdS artificial photosynthesis system by a green photo-assisted method. The well-ordered superstructure of meso-TiO₂ and efficient charge-transfer pathway among the three components are crucial for retarding charge recombination. As a result, the meso-TiO₂/Au/CdS photocatalyst displays enhanced visible light-driven photocatalytic hydrogen evolution (4.60 mmol h^-1 g^-1), which is 3.2 times higher than that of commercial TiO₂ (P25)/Au/CdS with disordered TiO₂ nanocrystal aggregates (1.41 mmol h^-1 g^-1). This work provides a promising bioinspired design strategy for photocatalysts with an improved solar conversion efficiency.

Pyro-photocatalytic Coupled Effect in Ferroelectric Bi0.5Na0.5TiO3 Nanoparticles for Enhanced Dye Degradation

Advanced oxidation processes (AOPs), achieved through the continuous attack of reactive oxygen species (ROS), are considered the most efficient way to mineralize organic pollutants. Among them, photocatalysis is the most environmentally friendly strategy for pollution mitigation but is hampered by low conversion efficiency. By exploiting the coupling effect without changing the properties of the semiconductor, the application of pyroelectric fields can significantly improve the catalytic performance. The degradation rate of rhodamine B by Bi_0.5Na_0.5TiO₃ (BNT) nanoparticles under temperature fluctuations and visible light irradiation was up to 98%. The performance was enhanced by 216.54% and 31.48% compared to the pyroelectric catalysis and photocatalysis alone, respectively. The improved performance is due to the introduced pyroelectric potential with the imposition of temperature fluctuations, which can make the domains enhance the polarization of ferroelectrics, thus promoting the charge separation. This method can significantly advance the coupled pyro-photocatalytic reaction of ferroelectric semiconductors and also can enable the synergistic utilization of multiple energy sources such as solar and thermal energy, which is a promising strategy for environmental remediation.

Biosafe Bi2O2Se ultrathin nanosheet for water disinfection via solar-induced photothermal synergistic effect

Solar-induced sterilization via photothermal synergy has attracted enormous attention due to its zero-energy consumption and the elimination of hazardous chemical disinfectant. Herein, we successfully synthesized a super biosafety Bi₂O₂Se with crossed nanosheet structure (Bi₂O₂Se-CN) for the sterilization of Escherichia coli (E. coli) via solar-induced photothermal synergistic effect. In comparison to bulk Bi₂O₂Se, the lower light reflection and more efficient photogenerated charge carrier separation under visible-infrared light irradiation resulted in the excellent sterilization effect of Bi₂O₂Se-CN, with a sterilization efficiency of 99.9% under the synergistic effect of light and heat. The crossed ultrathin nanosheet structure and suitable band gap width of Bi₂O₂Se-CN are fundamental reasons for its enhanced light absorption and charge carrier separation efficiency. Mechanistic studies showed that Bi₂O₂Se-CN can completely inactivate bacteria via generating a large amount of reactive oxygen species (•O₂^-, •OH, and ¹O₂) to attack the cell membrane, which further resulted in the reduced activity of intracellular enzymes and the leakage of intracellular contents. The biosafety property of Bi₂O₂Se-CN was confirmed by in vivo toxicological evaluation on the mice model. This work provided new ideas for the design of more efficient, energy-saving, biocompatible and environmental friendly solar water purification projects.

Enhanced piezotronics by single-crystalline ferroelectrics for uniformly strengthening the piezo-photocatalysis of electrospun BaTiO3@TiO2 nanofibers

Turning the built-in electric field by modulating the morphology and microstructure of ferroelectric materials is considered a viable approach to enhancing the piezo-photocatalytic activity of the ferroelectric/oxide semiconductor heterojunctions. Here, hydrothermally synthesized single-crystalline BaTiO₃ nanoparticles are employed to construct BaTiO₃@TiO₂ hybrid nanofibers by sol-gel assisted electrospinning of TiO₂ nanofibers and annealing. Because of the obvious enhancement of the synergetic piezo-photocatalytic effect under both ultrasonic and ultraviolet (UV) light irradiation, the piezo-photocatalytic degradation rate constant (k) of BaTiO₃@TiO₂ hybrid nanofibers on methyl orange (MO) reaches 14.84 × 10^-2 min^-1, which is approximately seven fold that for piezocatalysis and six fold that for photocatalysis. Moreover, BaTiO₃@TiO₂ core-shell nanoparticles are also synthesized for comparison purposes to assess the influence of microstructure on the piezo-photocatalysis by a wet-chemical coating of TiO₂ on BaTiO₃ nanoparticles. Such a high piezo-photocatalytic activity is attributed to the enhancement of the piezotronic effect by the single-crystalline ferroelectric nanoparticles and the nanoconfinement effect caused by the one-dimensional boundary of nanofibers with high specific surface areas. The mechanically induced uniform local built-in electric fields originated from the single-crystalline ferroelectric nanoparticles can enhance the separation of photogenerated electron and hole pairs and promote the formation of free hydroxyl radicals, resulting in a strong piezotronic effect boosted photochemical degradation of organic dye. This work introduces the single-crystalline ferroelectrics to construct ferroelectric/oxide semiconductor heterojunctions, and the enhanced local piezotronic effect uniformly strengthens the photochemical reactivity, which offers a new option to design high-efficiency piezo-photocatalysts for pollutant treatment.

Recent Advancements in Photocatalysis Coupling by External Physical Fields

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance, such as artificial photosynthesis, water splitting, pollutants degradation, etc. Despite decades of research, the performance of photocatalysis still falls far short of the requirement of 5% solar energy conversion efficiency. Combining photocatalysis with the other physical fields has been proven to be an efficient way around this barrier which can improve the performance of photocatalysis remarkably. This review will focus on the recent advances in photocatalysis coupling by external physical fields, including Thermal-coupled photocatalysis (TCP), Mechanical-coupled photocatalysis (MCP), and Electromagnetism-coupled photocatalysis (ECP). In this paper, coupling mechanisms, materials, and applications of external physical fields are reviewed. Specifically, the promotive effect on photocatalytic activity by the external fields is highlighted. This review will provide a detailed and specific reference for photocatalysis coupling by external physical fields in a deep-going way.

PtS quantum dots/Nb2O5 nanosheets with accelerated charge transfer for boosting photocatalytic H2 production

The rapid recombination rate of charges limits the improvement of photocatalytic hydrogen evolution performance related to semiconductor photocatalysts. An effective strategy to accelerate charge separation and transfer is the design and construction of new high-efficiency cocatalysts on photocatalysts. Herein, a system of PtS quantum dots/Nb₂O₅ nanosheets (PtS/Nb₂O₅) was constructed via the in situ vapor phase (ISVP) synthesis process. The conclusions from ultrafast femtosecond-resolved TA spectroscopy indicated that the lifetime of the photogenerated charges of PtS/Nb₂O₅ (6073.75 ps) was shortened markedly in contrast to that of Nb₂O₅ (6634.05 ps), manifesting the facilitated separation and transfer of photogenerated charges caused by the quantum-dot-structured PtS cocatalyst. The enhanced charge separation and transfer capacity contributes to an excellent H₂ production rate of 182.5 μmol h^-1 for PtS/Nb₂O₅, which is up to 3.4 and 12.2 times that of Pt/Nb₂O₅ and Nb₂O₅, respectively. This work brings up new avenues for constructing unique and effective photocatalysts via the cocatalyst design.

Solar Energy Catalysis

When it comes to using solar energy to promote catalytic reactions, photocatalysis technology is the first choice. However, sunlight can not only be directly converted into chemical energy through a photocatalytic process, it can also be converted through different energy-transfer pathways. Using sunlight as the energy source, photocatalytic reactions can proceed independently, and can also be coupled with other catalytic technologies to enhance the overall catalytic efficiency. Therefore, sunlight-driven catalytic reactions are diverse, and need to be given a specific definition. We propose a timely perspective for catalytic reactions driven by sunlight and give them a specific definition, namely "solar energy catalysis". The concept of different types of solar energy catalysis, such as photocatalysis, photothermal catalysis, solar cell powered electrocatalysis, and pyroelectric catalysis, are highlighted. Finally, their limitations and future research directions are discussed.

A Flexible and Weavable Lignocellulose-Based Photocatalyst Supported by Natural Three-Dimensional Porous Juncus effusus for Highly Efficient Degradation of Environmental Contaminants

Lignocellulosic biomass is a potential biotemplate for disposing the burden of the uncontrollable accumulation of environmental contaminants disrupting the hydrophytic ecosystems. Herein, an efficient solar-driven catalyst was prepared using a natural three-dimensional (3D) porous lignocellulose-based Juncus effusus (JE) fiber for wastewater treatment. Owing to the exquisite 3D microstructure and abundant hydroxyl groups, the two-dimensional lamellar graphitic carbon nitride/graphene oxide (g-C₃N₄/GO) nanocomposites were successfully synthesized and decorated on the carboxymethylated JE fiber via the electrostatic self-assembly method. The as-prepared g-C₃N₄/GO-JE (CNG-JE) photocatalyst exhibits excellent light absorption efficiency and a superior ability to accelerate photogenerated electron migration. The outstanding adsorption performance toward pollutants also contributes to the photodegradation property of CNG-JE, showing highly efficient degradation of C.I. Reactive Red 120 (99.8%), C.I. Acid Yellow 11 (99.8%), methylene blue (99.4%), Cr(VI) (98.8%), and tetracycline (87.2%). Most importantly, the lignocellulose-based CNG-JE fibers could be fabricated into a photocatalyst textile due to their flexible and weavable properties. In actual application, the CNG-JE textile can be reused for at least five cycles under the sun, demonstrating that the flexible CNG-JE textile is practical and recyclable. This study may provide a platform for constructing efficient, flexible, and weavable biomass-based porous materials for cost-effective and sustainable catalytic applications.

Accelerating Nickel-Based Molecular Construction via DFT Guidance for Advanced Photocatalytic Hydrogen Production

Understanding the nickel-based molecular catalyst structure and functional relationship is crucial for catalytic hydrogen production in aqueous solutions. Density functional theory (DFT) provides mature theoretical knowledge for efficient catalyst design, significantly reducing catalyst synthesis time and energy consumption. In the present work, three molecular catalysts, Ni(qbz)(pys)₂ (qbz = 2-quinoline benzimidazole) (NQP 1), Ni(qbo)(pys)₂ (qbo = 2-quinoline benzothiazole) (NQP 2), and Ni(pbz)(pys)₂ (pbz = 4-chloro-2,2-pyridylbenzimidazole) (NQP 3) (pys = 2-mercaptopyridine), were designed and synthesized and exhibit a high performance for H₂ generation in aqueous solution with a lamp (λ ≥ 400 nm) under visible light irradiation. Under the optimal conditions, a H₂ evolution rate as high as 1190 μmol h^-1 can be obtained over 25 mg of NQP 1 with the best catalytic performance. DFT has been adopted in this study to unveil the relationship between the ligand qbz and catalyst NQP 1─an efficient step in the design of catalysts with an excellent catalytic performance. We show that, in addition to the presence of the triphenyl ring increasing the overall electron density, rapid electron transfer (ET) from excited fluorescein (Fl) to NQP 1 significantly improves the chance of photogenerated electrons transferring to the active site, ultimately increasing the catalytic activity for H₂ production. This work on understanding the correlation between structures and properties of complexes provides a new idea for manufacturing high-performance photocatalysts.

Insight into the effect of OH modification on the piezo-photocatalytic hydrogen production activity of SrTiO3

Surface modification by hydrophilic functional group have a tremendous influence on the catalytic activity of photocatalyst, however, there are few reports on improving piezoelectric catalytic performance through surface functionalization. Herein, OH-modified SrTiO₃ was successfully obtained via a novel low-temperature solid-state precursor method and employed as a catalyst for photocatalytic, piezocatalytic and piezo-photocatalytic hydrogen production. Thanks to the super hydrophilic that is facilitating the contact of catalyst and water molecular and the more oxygen vacancies that can promote electron-hole separation, the photocatalytic, piezocatalytic and piezo-photocatalytic hydrogen generation of OH-modified SrTiO₃ (OH-STO) is about two times higher than pristine SrTiO₃ (STO). It is worth mentioning that the optimal piezo-photocatalytic hydrogen evolution rate of OH-STO (701.2 µmol h^-1 g^-1) is 5.3 times higher than the photocatalytic hydrogen evolution process of STO. This study presents a low-energy approach to the rational design of functional group modification nanomaterials that possess excellent piezo-photocatalytic performance.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Harvesting the infrared part of solar light to promote charge transfer in Bi2S3/WO3 photoanode for enhanced photoelectrochemical water splitting

Infrared light absorbed by semiconductors hardly contributes to the solar energy conversion due to its low photon energy. Herein, photothermal effect activated by infrared part of solar light is introduced to promote the photoelectrochemical (PEC) water splitting of photoanodes. Narrow band-gap semiconductor Bi₂S₃ is deposited on the surface of WO₃ nanosheets, exhibiting a broad-spectral response. In addition to the enhanced density of photo-generated electrons, significant temperature elevation is observed for the Bi₂S₃/WO₃ composite photoanode under the illumination of infrared part of solar light because of the photothermal conversion property of Bi₂S₃. The moderately enhanced temperature accelerates charge carrier migration and finally increases the efficiency of solar energy conversion. With the assistance of photothermal effect, a remarkable photocurrent density of 4.05 mA cm^-2 at 1.23 V vs. reversible reference electrode (V_RHE) is achieved by Bi₂S₃/WO₃ composite photoanode, over 880% higher than that of the pristine WO₃. The introduction of photothermal effect activated by infrared light provides general and robust strategy to promote the PEC performance of photoanodes.

Construction of an Interfacial Photocatalytic Mode Based on Carbonized Mushrooms to Enhance Infrared Light-Assisted Photocatalytic Water Splitting Performance

To find a more efficient way to generate photocatalytic hydrogen, we developed the interfacial photocatalytic mode, in which the photocatalytic reaction can be transferred to a high-energy interfacial area. The new interfacial mode in this work is assembled with the help of carbonized mushrooms, which is an ideal water transporter as well as an excellent photothermal converter. The higher temperature from efficient light-to-heat conversion performance and thermal localization promote the efficiency of hydrogen evolution, and some effects peculiar to the interfacial mode can make the departure of hydrogen from the active sites of the photocatalyst smoother. As a result, the active sites can be exposed in a timely manner to allow the progress of the next cycle of the photocatalytic reaction to be smoother. The efficiency of interfacial photocatalytic hydrogen production can reach >10 times that of the corresponding sample in the traditional bulk water mode. This work has allowed further exploration of the construction of the interfacial photocatalytic mode, provided a reliable experimental basis for the development of the interfacial mode, and illuminated a new path for the development of photocatalytic water splitting.

Silver nanoparticles embedded 2D g-C3N4nanosheets toward excellent photocatalytic hydrogen evolution under visible light

Photocatalytic water splitting is considered to be a feasible method to replace traditional energy. However, most of the catalysts have unsatisfactory performance. In this work, we used a hydrothermal process to grow Ag nanoparticlesin situon g-C₃N₄nanosheets, and then a high performance catalyst (Ag-g-C₃N₄) under visible light was obtained. The Ag nanoparticles obtained by this process are amorphous and exhibit excellent catalytic activity. At the same time, the local plasmon resonance effect of Ag can effectively enhance the absorption intensity of visible light by the catalyst. The hydrogen production rate promote to 1035μmol g^-1h^-1after loaded 0.6 wt% of Ag under the visible light, which was 313 times higher than that of pure g-C₃N₄(3.3μmol g^-1h^-1). This hydrogen production rate is higher than most previously reported catalysts which loaded with Ag or Pt. The excellent activity of Ag-g-C₃N₄is benefited from the Ag nanoparticles and special interaction in each other. Through various analysis and characterization methods, it is shown that the synergy between Ag and g-C₃N₄can effectively promote the separation of carriers and the transfer of electrons. Our work proves that Ag-g-C₃N₄is a promising catalyst to make full use of solar energy.

Enhanced Photocatalytic Activity of ZnO–CdS Composite Nanostructures towards the Degradation of Rhodamine B under Solar Light

A simple chemical precipitation route was utilized for the synthesis of ZnO nanoparticles (NPs), CdS NPs and ZnO–CdS nanocomposites (NCs). The synthesized nanostructures were examined for the crystal structure, morphology, optical properties and photodegradation activity of rhodamine B (RhB) dye. The ZnO–CdS NCs showed a mixed phase of hexagonal wurtzite structure for both ZnO NPs and CdS NPs. Pure ZnO NPs and CdS NPs possessed bandgaps of 3.2617 and 2.5261 eV, respectively. On the other hand, the composite nanostructures displayed a more narrow bandgap of 2.9796 eV than pure ZnO NPs. When compared to bare ZnO NPs, the PL intensity of near-band-edge emission at 381 nm was practically suppressed, suggesting a lower rate of photogenerated electron–hole (e−/h+) pairs recombination, resulting in enhanced photocatalytic activity. Under solar light, the composite nanostructures displayed a photodegradation efficiency of 98.16% towards of RhB dye. After four trials, the structural stability of ZnO–CdS NCs was verified.

CdS/MnS p-n heterojunction with directional carriers diffusion path for efficient photocatalytic H2 production

Photocatalytic reactions usually involve the reduction of photogenerated electrons and the oxidation of photogenerated holes. The migration process of photongenerated holes is slower than photogenerated electronics, and the oxidation potential...

UV-Vis-NIR full-range-responsive carbon-rich carbon nitride nanotubes for enhanced photocatalytic performance

The light absorption range of “Red” carbon-rich g-C3N4 nanotubes (R-CN) is extended to the near-infrared region, and R-CN shows excellent performance in the degradation of pollutant bisphenol A (BPA) and in photocatalytic hydrogen evolution.

Photocatalytic H2O Overall Splitting into H2 Bubbles by Single Atomic Sulfur Vacancy CdS with Spin Polarization Electric Field

Low efficient transfer of photogenerated charge carriers to redox sites along with high surface reaction barrier is a bottleneck problem of photocatalytic H₂O overall splitting. Here, in the absence of cocatalysts, H₂O overall splitting has been achieved by single-atomic S vacancy hexagonal CdS with a spin polarization electric field (PEF). Theoretical and experimental results confirm that single-atomic S vacancy-induced spin PEF with opposite direction to the Coulomb field accelerates charge carrier transport dynamics from the bulk phase to surface-redox sites. By systematically tuning the spin PEF intensity with single-atomic S vacancy content, common pristine CdS is converted to a photocatalyst that can efficiently complete H₂O overall splitting by releasing a great number of H₂ bubbles under natural solar light. This work solves the bottleneck of solar energy conversion in essence by single atom vacancy engineering, which will promote significant photocatalytic performance enhancement for commercialization.

ZnFe2O4@WO3-X /Polypyrrole: An Efficient Ternary Photocatalytic System for Energy and Environmental Application

Environmental protection and the necessity of green energy have become fundamental concerns for humankind. However, rapid recombination of photoexcitons in semiconductors often gets in the path of photocatalytic reactions and annoyingly suppresses the photocatalytic activity. In this study, a polypyrrole (PPY)-supported step-scheme (S-scheme) ZnFe₂O₄@WO_3-X (PZFW15) ternary composite was fabricated by a multistep process: hydrothermal and calcination processes, followed by polymerization. During the formation of the heterojunction, the oxygen vacancy (OV) on WO_3-X promotes effective separation and increases the redox power of the photogenerated excitons via the built-in internal electric field of S-scheme pathways between ZnF and WO_3-X. The successful construction of the S-scheme heterojunction was substantiated through X-ray photoelectron spectroscopy, experimental calculations, radical trapping experiment, and liquid electron spin resonance (ESR) characterization, whereas the existence of OVs was well confirmed by EPR and Raman analyses. Meanwhile, the PPY served as a supporter, and the polaron and bipolaron species of PPY acted as electron and hole acceptors, respectively, which further enhances the charge-carrier transmission and separation in the ternary PZFW15 photocatalyst. The designed ternary nanohybrid (PZFW15) displays outstanding gemifloxacin detoxification (95%, 60 min) and hydrogen generation (657 μmol h^-1), i.e., 1.5 and 2.2 times higher than the normal S-scheme ZFW15 heterostructure and pure ZnFe₂O₄ (ZnF), respectively, with an apparent conversion efficiency of 4.92%. The ESR and trapping experiments indicate that the generated ^•OH and ^•O₂ ^- radicals from the PZFW15 photocatalyst are responsible for gemifloxacin degradation. This unique PPY-supported S-scheme heterojunction is also beneficial for the enhanced electron-transfer rate and provides abundant active sites for photocatalytic reactions.

Electrostatic self-assembly to form unique LiNbO3/ZnS core-shell structure for photocatalytic nitrate reduction enhancement

Photocatalytic NO₃^- reduction in water has been regarded as a promising route due to its high efficiency and green feature. Several limiting factors, such as lack of catalytic sites, insufficient light collection, and spatial charge separation capacity photocatalytic denitrification, still need to be overcome for the practical applications. Herein, an innovative LiNbO₃/ZnS heterojunction with a unilateral opening core-shell structure was constructed. ZnS was tightly anchored on the surface of LiNbO₃ by modified electrostatic self-assembly method. High nitrate removal rate (98.84%) and N₂ selectivity (98.92%) were achieved with a molar ratio of LiNbO₃ and ZnS of 1:5 (1:5L-ZS) using formic acid as a hole scavenge. The LiNbO₃/ZnS degradation kinetics of NO₃^- was corresponding to the first-order kinetics equation. The nitrate removal rate and N₂ selectivity remained stable after three cycles in such photocatalytic NO₃^- reduction. The outstanding photocatalyst performance can be ascribed to the improved surface active sites, the well-matched band structure, and the unique core-shell structure. It provides an effective strategy for controllable fabrication of core-shell photocatalyst with strong light-harvesting ability and charge separation efficiency to enhance the removal rate of nitrate in water.

Bodipy-Containing Porous Microcapsules for Flow Heterogeneous Photocatalysis

Photocatalysis is a facile strategy for complex chemical transformations. Heterogeneous photocatalysis, especially in the flow system, has attracted much attention as it avoids the separation of catalysts. Herein, a kind of a Bodipy-containing porous microcapsule heterogeneous photocatalyst was rationally constructed with modulation on a multiscale. The diiodo-Bodipy with methacrylate (MA-2IBDP) was synthesized as a polymerizable photosensitizer. After immobilization in a polymer matrix, the intersystem crossing rate constant of MA-2IBDP increased to 2.7 × 10¹⁰ s^-1 and its triplet excited-state lifetime prolonged to ∼1 ms. Porous structures in microcapsules were created to facilitate mass transfer. A flat plate flow reactor was constructed to fix the catalytic microcapsules and improve light utilization. With the combination of all the above benefits, the reaction rate constant (0.896 s^-1) is 10 times faster than that of MA-2IBDP in a homogeneous system for juglone synthesis. The continuous production can last for 30 h without yield decrease. The photocatalyst can also be used in aza-Henry reaction, Alder-Ene reaction, and oxidation of thiols to disulfides with conversion rates above 95%. This study provides a means for the construction of heterogeneous catalysts and the flow reaction system.