Dual-Scale Integration Design of Sn-ZnO Catalyst toward Efficient and Stable CO2 Electroreduction

Constructing a Localized Buffer Interlayer to Elevate High-Rate CO2-to-C2+ Electrosynthesis

Catalytic surface and interface engineering for the electrosynthesis of multicarbon chemicals from CO2 are widely investigated, while the selective regulation of mass transport for reactant CO2 and intermediate CO remains rarely explored, which is a critical challenge limiting the C2+ production rate. Here, we strategically construct a buffer interlayer with soluble ionic liquid (IL) additives between the aqueous electrolyte and the catalytic surface, which not only regulates the microenvironment of CO and CO2 at different reaction stages but also stabilizes catalytic sites. The CO residence time is extended in the buffer interlayer ascribed to the attractive interactions via dipole-dipole interactions and hydrogen bonding. CO2 and its transport are enhanced by the buffer reactions in the aqueous interlayer within the flow-through compact cell. Meanwhile, the utilization of ILs stabilizes active sites (Cu2O-derived Cu) by facilitating the regeneration of Cu2O through the applied potentials. Consequently, C2+ products are synthesized at a high rate with a partial current density of 1.30 A/cm2 for over 200 h. This concept is further scaled to a 100 cm2 flow cell, exhibiting a carbon loss below 6%. Such a systematic investigation establishes a general construction strategy for the buffer interlayer and catalytic sites in electrolysis.

COF-Assisted Construction of Steric Mass-Charge Channels to Boost Activity for High-Performance Fuel Cells

The two-dimensional lamellar materials disperse platinum sites and minimize noble-metal usage for fuel cells, while mass transport resistance at the stacked layers spurs device failure with a significant performance decline in membrane electrode assembly (MEA). Herein, we implant porous and rigid sulfonated covalent organic frameworks (COF) into the graphene-based catalytic layer for the construction of steric mass-charge channels, which highly facilitates the activity of oxygen reduction reactions in both the rotating disk electrode (RDE) measurements and MEA device tests. Specifically, the normalized mass activity is remarkably boosted by 3.7 times to 1.56 A mgpt -1 after additions of suitable COF modifications in the RDE tests. Especially, an excellent maximum power density of 1.015 W cm-2 is realized on the MEA in H2/Air condition, representing a 22 % improvement through such constructions of steric mass-charge channels. Meanwhile, the open-circuit voltage of fuel cells demonstrates only 0.8 % reductions after 10,000 cycles of stability tests. We further extended such methodology of constructing mass-charge channels to granular PtCo and commercial Pt/C catalysts, which demonstrates a significant impetus for stimulating the catalytic activity in fuel cells.

High-Performance Bi-Based Catalysts for CO₂ Reduction: In Situ Formation of Bi/Bi₂O₂CO₃ and Enhanced Formate Production

The unavoidable self-reduction of Bismuth (Bi)-based catalysts to zero-valence Bi often results in detrimental adsorption of OCHO*, leading to unsatisfactory selectivity of HCOOH in the electroreduction of carbon dioxide (CO2). A novel Bi-tannin (Bi-TA) complex is developed, which undergoes in situ reconstruction into a Bi/Bi₂O₂CO₃ phase during CO2 reduction. This reconstructed catalyst exhibits high activity and selectivity, achieving a Faradaic Efficiency (FE) for formate production exceeding 90%, peaking at 96%. Operando spectroscopic and theoretical analyses reveal that the Biδ+ active site in Bi/Bi₂O₂CO₃ significantly enhances the formation of the OCHO* intermediate, crucial for formate production. The study offers a promising approach to overcoming the limitations of Bi-based catalysts in CO2 reduction to formate.

Improved performances toward electrochemical carbon dioxide and oxygen reductions by iron-doped stannum nanoparticles

The CO2 reduction reaction (CO2RR) and oxygen reduction reaction (ORR) show great promise for expanding the use of renewable energy sources and fostering carbon neutrality. Sn-based catalysts show CO2RR activity; however, they have been rarely reported in the ORR. Herein, we prepared a nitrogen-carbon structure loaded with Fe-doped Sn nanoparticles (Fe-Sn/NC), which has good ORR and CO2RR activity. The results reveal that the Fe-Sn/NC catalysts deliver a high FECO of 99.0% at a low overpotential of -0.47 V in an H-type cell for over 100 h. Notably, a peak power density of 1.36 mW cm-2 is achieved in the Zn-CO2 battery with the Fe-Sn/NC cathode at discharge current densities varying from 2.0 to 4.0 mA cm-2, and the FECO remains above 99.0%. Due to efficient oxygen reduction reaction (ORR) performance and Zn-air battery (ZAB) characteristics, the ZAB-driven CO2RR has strong catalytic stability. This work proves that Fe-Sn/NC enhances the performance of the CO2RR and ORR, and the study of Zn-based batteries provides a new research direction for energy conversion.

Controllable Regulation of CO2 Adsorption Behavior via Precise Charge Donation Modulation for Highly Selective CO2 Electroreduction to Formic Acid

The synthesis of value-added products via CO2 electroreduction (CO2ER) is of great significance, but the development of efficient and versatile strategies for the controllable selectivity tuning is extremely challenging. Herein, the tuning of CO2ER selectivity through the modulation of CO2 adsorption behavior is proposed. Using the constructed zeolitic MOF (SNNU-339), CO2 adsorption behavior is controllably changed from *CO2 to CO2* via the precise ligand-to-metal charge donation (LTMCD) regulation. It is confirmed that the high electronegativity of the coordinate ligand directly restricts the LTMCD, reduces the charge density on the metal sites, lowers the Gibbs free energy for CO2* adsorption, and leads to the transformation of CO2 adsorption mode from *CO2 to CO2*. Owing to the modulated CO2 adsorption behavior and regulated kinetics, SNNU-339 exhibits superior HCOOH selectivity (≈330% promotion, 85.6% Faradaic efficiency) and high CO2ER activity. The wide applicability of the proposed approach sheds light on the efficient CO2ER. This study provides a competitive strategy for rational catalyst design and underscores the significance of adsorption behavior tuning in electrocatalysis.

Cu-In Dual Sites with Sulfur Defects toward Superior Ethanol Electrosynthesis from CO2 Electrolysis

The electrosynthesis of multi-carbon chemicals from excess carbon dioxide (CO2) is an area of great interest for research and commercial applications. However, improving both the yield of CO2-to-ethanol conversion and the stability of the catalyst at the same time is proving to be a challenging issue. Here it is proposed to stabilize active Cu(I) and In dual sites with sulfur defects through an electro-driven intercalation strategy, which leads to the delocalization of electron density that enhances orbital hybridizations between the Cu-C and In-H bonds. Hence, the energy barrier for the rate-limiting *CHO formation step is reduced toward the key *OCHCHO* formation during ethanol production, which is also facilitated by the combined Cu site enabling C-C coupling and In site with a higher oxygen affinity based on both thermodynamic and kinetic calculations. Accordingly, such dual-site catalyst achieves a high partial current density toward ethanol of 409 ± 15 mA cm⁻2 for over 120 h. Furthermore, a scaled-up flow cell is assembled with an industrial-relevant current of 5.7 A for over 36 h, in which the carbon loss is less than 2.5% and single-pass carbon efficiency is ≈19%.

Strong effect-correlated electrochemical CO2 reduction

Electrochemical CO2 reduction (ECR) holds great potential to alleviate the greenhouse effect and our dependence on fossil fuels by integrating renewable energy for the electrosynthesis of high-value fuels from CO2. However, the high thermodynamic energy barrier, sluggish reaction kinetics, inadequate CO2 conversion rate, poor selectivity for the target product, and rapid electrocatalyst degradation severely limit its further industrial-scale application. Although numerous strategies have been proposed to enhance ECR performances from various perspectives, scattered studies fail to comprehensively elucidate the underlying effect-performance relationships toward ECR. Thus, this review presents a comparative summary and a deep discussion with respect to the effects strongly-correlated with ECR, including intrinsic effects of materials caused by various sizes, shapes, compositions, defects, interfaces, and ligands; structure-induced effects derived from diverse confinements, strains, and fields; electrolyte effects introduced by different solutes, solvents, cations, and anions; and environment effects induced by distinct ionomers, pressures, temperatures, gas impurities, and flow rates, with an emphasis on elaborating how these effects shape ECR electrocatalytic activities and selectivity and the underlying mechanisms. In addition, the challenges and prospects behind different effects resulting from various factors are suggested to inspire more attention towards high-throughput theoretical calculations and in situ/operando techniques to unlock the essence of enhanced ECR performance and realize its ultimate application.

Synergistic Effect of Grain Boundaries and Oxygen Vacancies on Enhanced Selectivity for Electrocatalytic CO2 Reduction

Dual-engineering involved of grain boundaries (GBs) and oxygen vacancies (VO) efficiently engineers the material's catalytic performance by simultaneously introducing favorable electronic and chemical properties. Herein, a novel SnO2 nanoplate is reported with simultaneous oxygen vacancies and abundant grain boundaries (V,G-SnOx/C) for promoting the highly selective conversion of CO2 to value-added formic acid. Attributing to the synergistic effect of employed dual-engineering, the V,G-SnOx/C displays highly catalytic selectivity with a maximum Faradaic efficiency (FE) of 87% for HCOOH production at -1.2 V versus RHE and FEs > 95% for all C1 products (CO and HCOOH) within all applied potential range, outperforming current state-of-the-art electrodes and the amorphous SnOx/C. Theoretical calculations combined with advanced characterizations revealed that GB induces the formation of electron-enriched Sn site, which strengthens the adsorption of *HCOO intermediate. While GBs and VO synergistically lower the reaction energy barrier, thus dramatically enhancing the intrinsic activity and selectivity toward HCOOH.

Recent Progress on Copper-Based Bimetallic Heterojunction Catalysts for CO2 Electrocatalysis: Unlocking the Mystery of Product Selectivity

Copper-based bimetallic heterojunction catalysts facilitate the deep electrochemical reduction of CO2 (eCO2RR) to produce high-value-added organic compounds, which hold significant promise. Understanding the influence of copper interactions with other metals on the adsorption strength of various intermediates is crucial as it directly impacts the reaction selectivity. In this review, an overview of the formation mechanism of various catalytic products in eCO2RR is provided and highlight the uniqueness of copper-based catalysts. By considering the different metals' adsorption tendencies toward various reaction intermediates, metals are classified, including copper, into four categories. The significance and advantages of constructing bimetallic heterojunction catalysts are then discussed and delve into the research findings and current development status of different types of copper-based bimetallic heterojunction catalysts. Finally, insights are offered into the design strategies for future high-performance electrocatalysts, aiming to contribute to the development of eCO2RR to multi-carbon fuels with high selectivity.

Constructing Highly Efficient ZnO Nanocatalysts with Exposed Extraordinary (110) Facet for CO2 Electroreduction

Electrochemical reduction of CO2 to highly valuable products is a promising way to reduce CO2 emissions. The shape and facets of metal nanocatalysts are the key parameters in determining the catalytic performance. However, the exposed crystal facets of ZnO with different morphologies and which facets achieve a high performance for CO2 reduction are still controversial. Here, we systematically investigate the effect of the facet-dependent reactivity of reduction of CO2 to CO on ZnO (nanowire, nanosheet, and flower-like). The ZnO nanosheet with exposed (110) facet exhibited prominent catalytic performance with a Faradaic efficiency of CO up to 84% and a current density of -10 mA cm-2 at -1.2 V versus RHE, far outperforming the ZnO nanowire (101) and ZnO nanoflower (103). Based on detailed characterizations and kinetic analysis, the ZnO nanosheet (110) with porous architecture increased the exposure of active sites. Further studies revealed that the high CO selectivity originated from the enhancement of CO2 adsorption and activation on the ZnO (110) facet, which promoted the conversion of CO2 toward CO. This study provides a new way to tailor the activity and selectivity of metal catalysts by engineering exposed specific facets.

Longevous Cycling of Rechargeable Zn-Air Battery Enabled by "Raisin-Bread" Cobalt Oxynitride/Porous Carbon Hybrid Electrocatalysts

Developing commercially viable electrocatalyst lies at the research hotspot of rechargeable Zn-air batteries, but it is still challenging to meet the requirements of energy efficiency and durability in realistic applications. Strategic material design is critical to addressing its drawbacks in terms of sluggish kinetics of oxygen reactions and limited battery lifespan. Herein, a "raisin-bread" architecture is designed for a hybrid catalyst constituting cobalt nitride as the core nanoparticle with thin oxidized coverings, which is further deposited within porous carbon aerogel. Based on synchrotron-based characterizations, this hybrid provides oxygen vacancies and Co-Nx -C sites as the active sites, resulting from a strong coupling between CoOx Ny nanoparticles and 3D conductive carbon scaffolds. Compared to the oxide reference, it performs enhanced stability in harsh electrocatalytic environments, highlighting the benefits of the oxynitride. Furthermore, the 3D conductive scaffolds improve charge/mass transportation and boost durability of these active sites. Density functional theory calculations reveal that the introduced N species into hybrid can synergistically tune the d-band center of cobalt and improve its bifunctional activity. As a result, the obtained air cathode exhibits bifunctional overpotential of 0.65 V and a battery lifetime exceeding 1350 h, which sets a new record for rechargeable Zn-air battery reported so far.

Revealing Co-N4 @Co-NP Bridge-Enabled Fast Charge Transfer and Active Intracellular Methanogenesis in Bio-Electrochemical CO2 -Conversion with Methanosarcina Barkeri

To significantly advance the bio-electrochemical CO2 -conversion rate and unfold the correlation between the abiotic electrode and the attached microorganisms, an atomic-nanoparticle bridge of Co-N4 @Co-NP crafted in metal-organic frameworks-derived nanosheets is integrated with a model methanogen of Methanosarcina barkeri (M. barkeri). The direct bonding of N in Co-N4 and Fe in member protein of Cytochrome b (Cytb) activates a fast direct electron transfer path while the Co nanoparticles further strengthen this bonding via decreasing the energy gap between the p-band center of N and the d-band center of Fe. This multiorbital tuning operation of Co nanoparticles also enhances the coenzyme F420-mediated electron transfer by enabling the electron flow direct to the hydrogenation sites. Particularly, the increased surface electric field of the Co-N4 @Co-NP bridge-based nanosheet electrode facilitates the interfacial Na+ accumulation to expedite ATPase transport for powering intracellular CO2 conversion. Remarkably, the self-assembled M.barkeri-Co-N4 @Co-NP biohybrid achieves a high methane production rate of 3860 mmol m-2 day-1 , which greatly outperforms other reported biohybrid systems. This work demonstrates a comprehensive scrutinization of biotic-abiotic energy transfer, which may serve as a guiding principle for efficient bio-electrochemical system design.

Bridging Trans-Scale Electrode Engineering for Mass CO2 Electrolysis

Electrochemical CO2 upgrade offers an artificial route for carbon recycling and neutralization, while its widespread implementation relies heavily on the simultaneous enhancement of mass transfer and reaction kinetics to achieve industrial conversion rates. Nevertheless, such a multiscale challenge calls for trans-scale electrode engineering. Herein, three scales are highlighted to disclose the key factors of CO2 electrolysis, including triple-phase boundaries, reaction microenvironment, and catalytic surface coordination. Furthermore, the advanced types of electrolyzers with various electrode design strategies are surveyed and compared to guide the system architectures for continuous conversion. We further offer an outlook on challenges and opportunities for the grand-scale application of CO2 electrolysis. Hence, this comprehensive Perspective bridges the gaps between electrode research and CO2 electrolysis practices. It contributes to facilitating the mixed reaction and mass transfer process, ultimately enabling the on-site recycling of CO2 emissions from industrial plants and achieving net negative emissions.

Tin/Tin Oxide Nanostructures: Formation, Application, and Atomic and Electronic Structure Peculiarities

For a very long period, tin was considered one of the most important metals for humans due to its easy access in nature and abundance of sources. In the past, tin was mainly used to make various utensils and weapons. Today, nanostructured tin and especially its oxide materials have been found to possess many characteristic physical and chemical properties that allow their use as functional materials in various fields such as energy storage, photocatalytic process, gas sensors, and solar cells. This review discusses current methods for the synthesis of Sn/SnO2 composite materials in form of powder or thin film, as well as the application of the most advanced characterization tools based on large-scale synchrotron radiation facilities to study their chemical composition and electronic features. In addition, the applications of Sn/SnO2 composites in various fields are presented in detail.

Acidic CO2 Electrolysis Addressing the "Alkalinity Issue" and Achieving High CO2 Utilization

Electrochemical CO2 reduction reaction (CO2 RR) provides a promising approach for sustainable chemical fuel production of carbon neutrality. Neutral and alkaline electrolytes are predominantly employed in the current electrolysis system, but with striking drawbacks of (bi)carbonate (CO3 2- /HCO3 - ) formation and crossover due to the rapid and thermodynamically favourable reaction between hydroxide (OH- ) with CO2 , resulting in low carbon utilization efficiency and short-lived catalysis. Very recently, CO2 RR in acidic media can effectively address the (bi)carbonate issue; however, the competing hydrogen evolution reaction (HER) is more kinetically favourable in acidic electrolytes, which dramatically reduces CO2 conversion efficiency. Thus, it is a big challenge to effectively suppress HER and accelerate acidic CO2 RR. In this review, we begin by summarizing the recent progress of acidic CO2 electrolysis, discussing the key factors limiting the application of acidic electrolytes. We then systematically discuss addressing strategies for acidic CO2 electrolysis, including electrolyte microenvironment modulation, alkali cations adjusting, surface/interface functionalization, nanoconfinement structural design, and novel electrolyzer exploitation. Finally, the new challenges and perspectives of acidic CO2 electrolysis are suggested. We believe this timely review can arouse researchers' attention to CO2 crossover, inspire new insights to solve the "alkalinity problem" and enable CO2 RR as a more sustainable technology.

Revealing the Kinetic Balance between Proton-Feeding and Hydrogenation in CO2 Electroreduction

Electrocatalytic reduction of CO₂ to high-value-added chemicals provides a feasible path for global carbon balance. Herein, the fabrication of Ni_{NP x} @Ni_{SA y} -NG (x,y = 1, 2, 3; NG = nitrogen-doped graphite) is reported, in which Ni single atom sites (Ni_SA ) and Ni nanoparticles (Ni_NP ) coexist. These Ni_{NP x} @Ni_{SA y} -NG presented a volcano-like trend for maximum CO Faradaic efficiency (FE_CO ) with the highest point at Ni_NP2 @Ni_SA2 -NG in CO₂ RR. Ni_NP2 @Ni_SA2 -NG exhibited ≈98% of maximum FE_CO and a large current density of -264 mA cm^-2 at -0.98 V (vs. RHE) in the flow cell. In situ experiment and density functional theory (DFT) calculations confirmed that the proper content of Ni_SA and Ni_NP balanced kinetic between proton-feeding and CO₂ hydrogenation. The Ni_NP in Ni_NP2 @Ni_SA2 -NG promoted the formation of H* and reduced the energy barrier of *CO₂ hydrogenation to *COOH, and CO desorption can be efficiently facilitated by Ni_SA sites, thereby resulting in enhanced CO₂ RR performance.

Selective CO2 Electroreduction to Formate on Polypyrrole-Modified Oxygen Vacancy-Rich Bi2 O3 Nanosheet Precatalysts by Local Microenvironment Modulation

Challenges remain in the development of highly efficient catalysts for selective electrochemical transformation of carbon dioxide (CO₂ ) to high-valued hydrocarbons. In this study, oxygen vacancy-rich Bi₂ O₃ nanosheets coated with polypyrrole (Bi₂ O₃ @PPy NSs) are designed and synthesized, as precatalysts for selective electrocatalytic CO₂ reduction to formate. Systematic material characterization demonstrated that Bi₂ O₃ @PPy precatalyst can evolve intoBi₂ O₂ CO₃ @PPy nanosheets with rich oxygen vacancies (Bi₂ O₂ CO₃ @PPy NSs) via electrolyte-mediated conversion and function as the real active catalyst for CO₂ reduction reaction electrocatalysis. Coating catalyst with a PPy shell can modulate the interfacial microenvironment of active sites, which work in coordination with rich oxygen vacancies in Bi₂ O₂ CO₃ and efficiently mediate directional selective CO₂ reduction toward formate formation. With the fine-tuning of interfacial microenvironment, the optimized Bi₂ O₃ @PPy-2 NSs derived Bi₂ O₂ CO₃ @PPy-2 NSs exhibit a maximum Faradaic efficiency of 95.8% at -0.8 V (versus. reversible hydrogen electrode) for formate production. This work might shed some light on designing advanced catalysts toward selective electrocatalytic CO₂ reduction through local microenvironment engineering.

A gradient Sn4+@Sn2+ core@shell structure induced by a strong metal oxide–support interaction for enhanced CO2 electroreduction

A gradient Sn4+@Sn2+ core@shell structure induced by a strong tin oxide–g-C3N4 support interaction enhanced the adsorption and stabilization of CO2˙−, and hence the CO2RR performances.