Optothermally Programmable Liquids with Spatiotemporal Precision and Functional Complexity

Universal membranization of synthetic coacervates and biomolecular condensates towards ultrastability and spontaneous emulsification

Membranization of membraneless coacervates and condensates is emerging as a promising strategy to resolve their inherent susceptibility to fusion, ripening and environmental variations. Yet current membranization agents by design are largely limited to a subclass or a specific kind of coacervate or condensate systems. Here we develop a library of condensate-amphiphilic block polymers that can efficiently form a polymeric layer on the droplet interface for a wide spectrum of synthetic coacervates and biomolecular condensates. Condensate-amphiphilic block polymers are designed with a condenophilic block firmly anchored to the condensed phase, a condenophobic block extended to the dilute phase and a self-association block to promote membrane formation. Critical to our design is the condenophilic block of phenylboronic acid and amidoamine that target the disparate chemistry of condensed droplets via multivalent affinities. The condensate-amphiphilic block polymer membranes render the droplets mechanically robust against fusion, regulate interfacial properties such as permeability and stiffness, and substantially improve droplet tolerance to challenging conditions of temperature, salinity, pH and organic solvents.

Metastable phase-separated droplet generation and long-time DNA enrichment by laser-induced Soret effect

Spatiotemporally controlled laser-induced phase separation (LIPS) offers unique research avenues and has potential for biological and biomedical applications. However, LIPS conditions often have drawbacks for practical use, which limit their applications. For instance, LIPS droplets are unstable and diminish after the laser is terminated. Here, we developed a novel LIPS method using laser-induced Soret effect with a simple setup to solve these problems. We generate liquid-liquid phase-separated (LLPS) droplets using LIPS in an aqueous two-phase system (ATPS) of dextran (DEX) and polyethylene glycol (PEG). When DEX-rich droplets were generated in the DEX/PEG mix on the phase boundary, the droplets showed unprecedently high longevity; the DEX droplets were retained over 48 h. This counterintuitive behaviour suggests that the droplet is in an unknown metastable state. By exploiting the capability of DEX-rich droplets to enrich nucleic acid polymers, we achieved stable DNA enrichment in LIPS DEX droplets with a high enrichment factor of 1400 ± 400. Further, we patterned DNA-carrying DEX-rich droplets into a designed structure to demonstrate the stability and spatiotemporal controllability of DEX-rich droplet formation. This is the first report for LIPS droplet generation in a DEX/PEG system, opening new avenues for biological and medical applications of LIPS.

Coacervate-pore complexes for selective molecular transport and dynamic reconfiguration

Despite surging interests on liquid-state coacervates and condensates, confinement within solid-state pores for selective permeation remains an unexplored area. Drawing inspiration from nuclear pore complexes (NPCs), we design and construct coacervate-pore complexes (CPCs) with regulatable permeability. We demonstrate universal CPC formation across 19 coacervate systems and 5 pore types, where capillarity drives the spontaneous imbibition of coacervate droplets into dispersed or interconnected pores. CPCs regulate through-pore transport by forming a fluidic network that modulates guest molecule permeability based on guest-coacervate affinity, mimicking NPC selectivity. While solid constructs of NPC mimicries are limited by spatial fixation of polymer chains, CPCs of a liquid nature feature dynamic healing and rapid phase transitioning for permeability recovery and regulation, respectively. Looking forward, we expect the current work to establish a basis for developing liquid-based NPC analogs using a large pool of synthetic coacervates and biomolecular condensates.

On-Chip Droplet Splitting with High Volume Ratios Using a 3D Conical Microstructure-Based Microfluidic Device

This work reports a simple microfluidic method for splitting a mother droplet into two daughter droplets with high and precise volume ratios. To achieve this, a droplet-splitting microfluidic device embedded with a three-dimensional (3D) conical microstructure is fabricated, in which the high splitting ratios of monodisperse mother droplets are achieved. The volume ratio of the split daughter droplets can reach up to 265. In addition, we examined factors that affect the splitting ratio of the daughter droplets and found that the ratio is affected by the flow rates of the two individual outlet channels, the injection length of the conical microstructure, and the diameter of the original mother droplets. Numerical simulations of these parameters were conducted to gain a clearer understanding of the splitting behavior. The proposed droplet splitting device with a conical microstructure enables on-chip sample extraction and droplet volume control, which can be a powerful tool for various droplet-based applications in microfluidic devices such as viral infectivity assays and sequencing heterogeneous populations.

Underwater Fabrication of Carbon Nanotube/Coacervate Composites

Soft conductive materials are of interest for a wide range of applications, but their syntheses have remained difficult. Herein, we present a convenient route for underwater fabrication of a composite made of carbon nanotubes (CNTs) and mussel-inspired complex coacervates. The key to success of this method is that CNTs were solubilized very effectively in protocoacervates, which are high-concentration solutions of polyelectrolytes at a pH where only one of them is charged, thereby impeding coacervate formation. Composite materials were formed by the simple injection of CNT-dispersed protocoacervate solutions into water under ambient conditions. The method is simple, fast, and ecofriendly, and composites of CNT-complex coacervate in the form of films or bulk materials were obtained. The composites demonstrated electrical conductivity and tunable mechanical properties, which depended on the concentration of polyelectrolytes and the CNT:protocoacervate ratio. Hence, the composites can be manipulated to attain diverse properties, for examples, tunable reduced modulus (15 to 32 GPa) and hardness (0.3 to 0.7 GPa) as well as an electrical conductivity of up to 4 × 103 S m-1.

Airflow Triggered Water Film Self-Sculpturing on Femtosecond Laser-Induced Heterogeneously Wetted Micro/Nanostructured Surfaces

Liquid manipulation is essential for daily life and modern industry, and it is widely used in various fields, including seawater desalination, microfluidic robots, and biomedical engineering. Nevertheless, the current research focuses on the manipulation of individual droplets. There are a few projects for water film management. Here, we proposed a facile method of wind-triggered water film self-sculpturing based on a heterogeneous wettability surface, which is achieved by the femtosecond laser direct writing technology and femtosecond laser deposition. Under the conditions of various airflow velocities and water film thicknesses, three distinct behaviors of the water film were analyzed. As a result, when the water film thickness is lower than 4.9 mm, the self-sculpture process will occur until the whole superhydrophobic surface dewetting. Four potential applications are demonstrated, including encryption, oil containers, reconfigurable patterning, and self-splitting devices. This work provides a new approach for manipulating a water film of fluid control engineering.

Light-Driven Spatiotemporal Pickering Emulsion Droplet Manipulation Enabled by Plasmonic Hybrid Microgels

The past decades have witnessed the development of various stimuli-responsive materials with tailored functionalities, enabling droplet manipulation through external force fields. Among different strategies, light exhibits excellent flexibility for contactless control of droplets, particularly in three-dimensional space. Here, we present a facile synthesis of plasmonic hybrid microgels based on the electrostatic heterocoagulation between cationic microgels and anionic Au nanoparticles. The hybrid microgels are effective stabilizers of oil-in-water Pickering emulsions. In addition, the laser irradiation on Au nanoparticles creats a "cascade effect" to thermally responsive microgels, which triggers a change in microgel wettability, resulting in microgel desorption and emulsion destabilization. More importantly, the localized heating generated by a focused laser induces the generation of a vapor bubble inside oil droplets, leading to the formation of a novel air-in-oil-in-water (A/O/W) emulsion. These A/O/W droplets are able to mimic natural microswimmers in an aqueous environment by tracking the motion of a laser spot, thus achieving on-demand droplet merging and chemical communication between isolated droplets. Such proposed systems are expected to extend the applications of microgel-stabilized Pickering emulsions for substance transport, programmed release and controlled catalytic reactions.

Optical Manipulation of Soft Matter

Optical manipulation has emerged as a pivotal tool in soft matter research, offering superior applicability, spatiotemporal precision, and manipulation capabilities compared to conventional methods. Here, an overview of the optical mechanisms governing the interaction between light and soft matter materials during manipulation is provided. The distinct characteristics exhibited by various soft matter materials, including liquid crystals, polymers, colloids, amphiphiles, thin liquid films, and biological soft materials are highlighted, and elucidate their fundamental response characteristics to optical manipulation techniques. This knowledge serves as a foundation for designing effective strategies for soft matter manipulation. Moreover, the diverse range of applications and future prospects that arise from the synergistic collaboration between optical manipulation and soft matter materials in emerging fields are explored.