Superfast Mass Transport of Na/K Via Mesochannels for Dendrite-Free Metal Batteries

Modulating the Spatio-Temporal Sequence of Lithium Plating and Stripping via a 3D Host for Solid State Batteries

Solid-state lithium metal batteries (SSLMBs) are now under intensive research for their high energy density and excellent safety. However, the Li transport limitation in Li metal anode (LMA) leads to mass/stress accumulation, dendrite initiation and void formation at the interface, which seriously hinders the development of SSLMBs. Herein, it is demonstrated through in situ electron microscopies that a mixed ionic-electronic conducting (MIEC) 3D host can promote the Li transport in LMA by increasing the diffusion pathways along the carbonaceous framework, carbon/Li interface and Li metal surface, enabling a fast and long-distance (nearly 100 µm) diffusion of Li atoms in LMA. Consequently, the spatio-temporal sequence of Li plating/stripping can be fundamentally changed. Specifically, both deposition and dissolution can occur far away from the interface, thereby mitigating the dendrite and void issues. Impressively, the resulting cells with carbonaceous hosts can achieve excellent cyclability and the highest capacity (28.8 mAh cm-2) so far. This work provides valuable insight for understanding Li transport and deposition/dissolution mechanisms in MIEC host-based LMAs, and a feasible solution for tackling the interface issues without involving stack pressure in SSLMBs.

Substitution Index-Prediction Rules for Low-Potential Plateau of Hard Carbon Anodes in Sodium-Ion Batteries

Establishing prediction rules for the low-potential plateau (LPP) of hard carbon (HC) anodes is crucial for constructing high-energy-density sodium-ion batteries (SIBs). While current studies suggest that the closed pores of HC can enhance the LPP performance, the rules for directly predicting the LPP from precursors have yet to be established. Here, prediction rules for the LPP of HC anodes in SIBs-the substitution index (Δ) of precursor are introduced. Three carbon models (disordered carbon, closed-pore-dominated carbon, and turbostratic carbon) are constructed to verify the accuracy of Δ and to explore the closed-pore formation and LPP mechanism. In detail, as the Δ increases from 0.06 to 0.22, the LPP capacity rises from 25 to 278 mAh g⁻¹, revealing a strong linear correlation between Δ of precursor and LPP capacity. In situ XRD, Raman, and ex situ SAXS, EPR further confirm that sodium storage in HC can be categorized into adsorption (>0.4 V), interlayer storage (0.4 to 0.15 V), and pore-filling (below 0.15 V). This work not only elucidates the sodium storage mechanisms, but also provides one efficient design guideline for advanced carbon anodes in SIBs.

Recent advances in potassium metal batteries: electrodes, interfaces and electrolytes

The exceptional theoretical capacity of potassium metal anodes (687 mA h g-1), along with their low electrochemical potential, makes potassium metal batteries (PMBs) highly attractive for achieving high energy density. This review first provides an overview of potassium metal anodes, including their origin, current development status, and distinctive advantages compared to other metal anodes. Then, it discusses the composition and characteristics of emerging breakthrough PMBs, such as K-S, K-O2, K-CO2 batteries, and anode-free metal batteries. Subsequently, we delve into the pivotal challenges and theoretical research pertaining to PMBs, such as potassium metal nucleation/stripping, dendritic growth in PMBs, and unstable interfaces. Furthermore, we comprehensively examine the latest strategies in electrode design (including alloy, host, and current collector design), interface engineering (such as artificial solid electrolyte interphase layers, barrier layer design, and separator modification), and electrolyte optimization concerning nucleation, cycling stability, coulombic efficiency, and the development of PMBs. Finally, we introduce key characterization techniques, including in situ liquid phase secondary ion mass spectrometry, titration gas chromatography, neutron-based characterization, and computational simulation. This review will propel advancements in electrodes, separators, and electrolytes for innovative PMBs and other similar alkali metal batteries.

Nanomaterials for Energy Storage Systems-A Review

The ever-increasing global energy demand necessitates the development of efficient, sustainable, and high-performance energy storage systems. Nanotechnology, through the manipulation of materials at the nanoscale, offers significant potential for enhancing the performance of energy storage devices due to unique properties such as increased surface area and improved conductivity. This review paper investigates the crucial role of nanotechnology in advancing energy storage technologies, with a specific focus on capacitors and batteries, including lithium-ion, sodium-sulfur, and redox flow. We explore the diverse applications of nanomaterials in batteries, encompassing electrode materials (e.g., carbon nanotubes, metal oxides), electrolytes, and separators. To address challenges like interfacial side reactions, advanced nanostructured materials are being developed. We also delve into various manufacturing methods for nanomaterials, including top-down (e.g., ball milling), bottom-up (e.g., chemical vapor deposition), and hybrid approaches, highlighting their scalability considerations. While challenges such as cost-effectiveness and environmental concerns persist, the outlook for nanotechnology in energy storage remains promising, with emerging trends including solid-state batteries and the integration of nanomaterials with artificial intelligence for optimized energy storage.

Nanofibrous Covalent Organic Frameworks as the Cathode, Separator, and Anode for Batteries with High Energy Density and Ultrafast-Charging Performance

To meet the demand for longer driving ranges and shorter charging times of power equipment in electric vehicles, engineering fast-charging batteries with exceptional capacity and extended lifespan is highly desired. In this work, we have developed a stable ultrafast-charging and high-energy-density all-nanofibrous covalent organic framework (COF) battery (ANCB) by designing a series of imine-based nanofibrous COFs for the cathode, separator, and anode by Schiff-base reactions. Hierarchical porous structures enabled by nanofibrous COFs were constructed for enhanced kinetics. Rational chemical structures have been designed for the cathode, separator, and anode materials, respectively. A nanofibrous COF (AA-COF) with bipolarization active sites and a wider layer spacing has been designed using a triphenylamine group for the cathode to achieve high voltage limits with fast mass transport. For the anode, a nanofibrous COF (TT-COF) with abundant polar groups, active sites, and homogenized Li+ flux based on imine, triazine, and benzene has been synthesized to ensure stable fast-charging performance. As for the separator, a COF-based electrospun polyacrylonitrile (PAN) composite nanofibrous separator (BB-COF/PAN) with hierarchical pores and high-temperature stability has been prepared to take up more electrolyte, promote mass transport, and enable as high-temperature operation as possible. The as-assembled ANCB delivers a high energy density of 517 Wh kg-1, a high power density of 9771 W kg-1 with only 56 s of ultrafast-charging time, and high-temperature operational potential, accompanied by a 0.56% capacity fading rate per cycle at 5 A g-1 and 100 °C. This ANCB features an ultralong lifespan and distinguished ultrafast-charging performance, making it a promising candidate for powering equipment in electric vehicles.

In-Depth Understanding of Interfacial Na+ Behaviors in Sodium Metal Anode: Migration, Desolvation, and Deposition

Interfacial Na+ behaviors of sodium (Na) anode severely threaten the stability of sodium-metal batteries (SMBs). This review systematically and in-depth discusses the current fundamental understanding of interfacial Na+ behaviors in SMBs including Na+ migration, desolvation, diffusion, nucleation, and deposition. The key influencing factors and optimization strategies of these behaviors are further summarized and discussed. More importantly, the high-energy-density anode-free sodium metal batteries (AFSMBs) are highlighted by addressing key issues in the areas of limited Na sources and irreversible Na loss. Simultaneously, recent advanced characterization techniques for deeper insights into interfacial Na+ deposition behavior and composition information of SEI film are spotlighted to provide guidance for the advancement of SMBs and AFSMBs. Finally, the prominent perspectives are presented to guide and promote the development of SMBs and AFSMBs.

Revealing the Charge Storage Mechanism in Porous Carbon to Achieve Efficient K Ion Storage

Constructing a porous structure is considered an appealing strategy to improve the electrochemical properties of carbon anodes for potassium-ion batteries (PIBs). Nevertheless, the correlation between electrochemical K-storage performance and pore structure has not been well elucidated, which hinders the development of high-performance carbon anodes. Herein, various porous carbons are synthesized with porosity structures ranging from micropores to micro/mesopores and mesopores, and systematic investigations are conducted to establish a relationship between pore characteristics and K-storage performance. It is found that micropores fail to afford accessible active sites for K ion storage, whereas mesopores can provide abundant surface adsorption sites, and the enlarged interlayer spacing facilitates the intercalation process, thus resulting in significantly improved K-storage performances. Consequently, PCa electrode with a prominent mesoporous structure achieves the highest reversible capacity of 421.7 mAh g-1 and an excellent rate capability of 191.8 mAh g-1 at 5 C. Furthermore, the assembled potassium-ion hybrid capacitor realizes an impressive energy density of 151.7 Wh kg-1 at a power density of 398 W kg-1. The proposed work not only deepens the understanding of potassium storage in carbon materials with distinctive porosities but also paves a path toward developing high-performance anodes for PIBs with customized energy storage capabilities.

A Critical Review on Room-Temperature Sodium-Sulfur Batteries: From Research Advances to Practical Perspectives

Room-temperature sodium-sulfur (RT-Na/S) batteries are promising alternatives for next-generation energy storage systems with high energy density and high power density. However, some notorious issues are hampering the practical application of RT-Na/S batteries. Besides, the working mechanism of RT-Na/S batteries under practical conditions such as high sulfur loading, lean electrolyte, and low capacity ratio between the negative and positive electrode (N/P ratio), is of essential importance for practical applications, yet the significance of these parameters has long been disregarded. Herein, it is comprehensively reviewed recent advances on Na metal anode, S cathode, electrolyte, and separator engineering for RT-Na/S batteries. The discrepancies between laboratory research and practical conditions are elaborately discussed, endeavors toward practical applications are highlighted, and suggestions for the practical values of the crucial parameters are rationally proposed. Furthermore, an empirical equation to estimate the actual energy density of RT-Na/S pouch cells under practical conditions is rationally proposed for the first time, making it possible to evaluate the gravimetric energy density of the cells under practical conditions. This review aims to reemphasize the vital importance of the crucial parameters for RT-Na/S batteries to bridge the gaps between laboratory research and practical applications.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

Cobalt/Nitrogen Co-Doped Carbon Materials Enhance the Reaction Rate of Sodium-Potassium Alloy Electrodes

Sodium-potassium (NaK) alloy electrodes are ideal for next-generation dendrite-free alkali metal electrodes due to their dendrite-free nature. However, issues such as slow diffusion kinetics due to the large K+ radius and the loss of active potassium during the reaction severely limit its application. Here a novel cobalt/nitrogen-doped carbon material is designed and it is applied to the construction of a NaK alloy electrode. The experimental and theoretical results indicate that the confining effect of the nitrogen-doped graphitic carbon layer can protect the cobalt nanoparticles from corrosion leaching, while the presence of Co─Nx bonds and cobalt nanoparticles provides more active sites for the reaction, realizing the synergistic effect of adsorption-catalytic modulation, lowering the K+ diffusion energy barrier and promoting charge transfer and ion diffusion. The application of this electrode to a symmetrical battery can achieve more than 1800 stable cycles under a current density of 0.4 mA cm-2 and a charge/discharge specific capacity of 122.64 mAh g-1 under a current of 0.5C in a full battery. This finding provides a new idea to realize a fast, stable, and efficient application of NaK alloy electrodes.