High-Entropy Engineering of Cubic SiP with Metallic Conductivity for Fast and Durable Li-Ion Batteries

A cost-effective, scalable ball milling process is employed to synthesize the InGeSiP3 compound with a cubic ZnS structure, aiming to address the sluggish reaction kinetics of Si-based anodes for Lithium-ion batteries. Experimental measurements and first-principles calculations confirm that the synthesized InGeSiP3 exhibits significantly higher electronic conductivity, larger Li-ion diffusivity, and greater tolerance to volume change than its parent phases InGe (or Si)P2 or In (or Ge, or Si)P. These improvements stem from its elevated configurational entropy. Multiple characterizations validate that InGeSiP3 undergoes a reversible Li-storage mechanism that involves intercalation, followed by conversion and alloy reactions, resulting in a reversible capacity of 1733 mA h g-1 with an initial Coulombic efficiency of 90%. Moreover, the InGeSiP3-based electrodes exhibit exceptional cycling stability, retaining an 1121 mA h g-1 capacity with a retention rate of ≈87% after 1500 cycles at 2000 mA g-1 and remarkable high-rate capability, achieving 882 mA h g-1 at 10 000 mA g-1. Inspired by the distinctive characteristic of high entropy, the synthesis is extended to high entropy GaCu (or Zn)InGeSiP5, CuZnInGeSiP5, GaCuZnInGeSiP6, InGeSiP2S (or Se), and InGeSiPSSe. This endeavor overcomes the immiscibility of different metals and non-metals, paving the way for the electrochemical energy storage application of high-entropy silicon-phosphides.

Spatial Effect on the Performance of Carboxylate Anode Materials in Na-Ion Batteries

Developing low-voltage carboxylate anode materials is critical for achieving low-cost, high-performance, and sustainable Na-ion batteries (NIBs). However, the structure design rationale and structure-performance correlation for organic carboxylates in NIBs remains elusive. Herein, the spatial effect on the performance of carboxylate anode materials is studied by introducing heteroatoms in the conjugation structure and manipulating the positions of carboxylate groups in the aromatic rings. Planar and twisted organic carboxylates are designed and synthesized to gain insight into the impact of geometric structures to the electrochemical performance of carboxylate anodes in NIBs. Among the carboxylates, disodium 2,2'-bipyridine-5,5'-dicarboxylate (2255-Na) with a planar structure outperforms the others in terms of highest specific capacity (210 mAh g-1), longest cycle life (2000 cycles), and best rate capability (up to 5 A g-1). The cyclic stability and redox mechanism of 2255-Na in NIBs are exploited by various characterization techniques. Moreover, high-temperature (up to 100 °C) and all-organic batteries based on a 2255-Na anode, a polyaniline (PANI) cathode, and an ether-based electrolyte are achieved and exhibited exceptional electrochemical performance. Therefore, this work demonstrates that designing organic carboxylates with extended planar conjugation structures is an effective strategy to achieve high-performance and sustainable NIBs.

Ordered Vacancies as Sodium Ion Micropumps in Cu-Deficient Copper Indium Diselenide to Enhance Sodium Storage

Unordered vacancies engineered in host anode materials cannot well maintain the uniform Na+ adsorbed and possibly render the local structural stress intense, resulting in electrode peeling and battery failure. Here, the indium is first introduced into Cu2Se to achieve the formation of CuInSe2. Next, an ion extraction strategy is employed to fabricate Cu0.54In1.15Se2 enriched with ordered vacancies by spontaneous formation of defect pairs. Such ordered defects, compared with unordered ones, can serve as myriad sodium ion micropumps evenly distributing in crystalline host to homogenize the adsorbed Na+ and the generated volumetric stress during the electrochemistry. Furthermore, Cu0.54In1.15Se2 is indeed proved by the calculations to exhibit smaller volumetric variation than the counterpart with unordered vacancies. Thanks to the distinct ordered vacancy structure, the material exhibits a highly reversible capacity of 428 mAh g-1 at 1 C and a high-rate stability of 311.7 mAh g-1 at 10 C after 5000 cycles when employed as an anode material for Sodium-ion batteries (SIBs). This work presents the promotive effect of ordered vacancies on the electrochemistry of SIBs and demonstrates the superiority to unordered vacancies, which is expected to extend it to other metal-ion batteries, not limited to SIBs to achieve high capacity and cycling stability.

Tailored Yolk-Shell Design to Silicon Microparticles via Scalable and Template-Free Synthesis for Superior Lithium Storage

Micrometer-sized Si particles are beneficial to practical lithium-ion batteries in regard to low cost and high volumetric energy density in comparison with nanostructured Si anodes. However, both the issues of electrical contact loss and overgrowth of solid electrolyte interface for microscale Si induced by colossal volume change still remain to be addressed. Herein, a scalable and template-free method is introduced to fabricate yolk-shell structured Si anode from commercially available Si microparticles. The void is created via a one-step alkali etching process with the remaining silicon core as the yolk, and a double-walled shell is formed from simultaneous in situ growth of the conformal native oxide layer and subsequent carbon coating. In this configuration, the well-defined void spaces allow the Si core to expand without compromising structural integrity, while the double-walled shell acts as a static capsule to confine silicon fragments despite likely particle fracture. Therefore, electrical connectivity is maintained on both the particle and electrode level during deep galvanostatic cycling, and the solid-electrolyte interface is stabilized on the shell surface. Owing to the benefits of tailored design, excellent cycling stability (capacity retention of 95% after 100 cycles) and high coulombic efficiency (99.5%) are realized in a practical full-cell demonstration.

Revealing the Charge Storage Mechanism in Porous Carbon to Achieve Efficient K Ion Storage

Constructing a porous structure is considered an appealing strategy to improve the electrochemical properties of carbon anodes for potassium-ion batteries (PIBs). Nevertheless, the correlation between electrochemical K-storage performance and pore structure has not been well elucidated, which hinders the development of high-performance carbon anodes. Herein, various porous carbons are synthesized with porosity structures ranging from micropores to micro/mesopores and mesopores, and systematic investigations are conducted to establish a relationship between pore characteristics and K-storage performance. It is found that micropores fail to afford accessible active sites for K ion storage, whereas mesopores can provide abundant surface adsorption sites, and the enlarged interlayer spacing facilitates the intercalation process, thus resulting in significantly improved K-storage performances. Consequently, PCa electrode with a prominent mesoporous structure achieves the highest reversible capacity of 421.7 mAh g-1 and an excellent rate capability of 191.8 mAh g-1 at 5 C. Furthermore, the assembled potassium-ion hybrid capacitor realizes an impressive energy density of 151.7 Wh kg-1 at a power density of 398 W kg-1. The proposed work not only deepens the understanding of potassium storage in carbon materials with distinctive porosities but also paves a path toward developing high-performance anodes for PIBs with customized energy storage capabilities.

Constructing Dynamic Anode/Electrolyte Interfaces Coupled with Regulated Solvation Structures for Long-Term and Highly Reversible Zinc Metal Anodes

Aqueous zinc ion batteries (AZIBs) show a great potential for next-generation energy storage due to their high safety and high energy density. However, the severe side reactions of zinc negative electrode largely hinder the further application of AZIBs. Herein, trace tris(hydroxymethyl)aminomethane (Tris) additive with rich lone-pair-electrons and zincophilic sites is firstly introduced to achieve long-term and highly reversible Zn plating/stripping. Specifically, Tris not only regulates the solvation structure of Zn2+, but is also adsorbed vertically on the Zn anode surface with a changed coordination intensity during the plating/stripping process of Zn to generate an in situ dynamic adsorption layer for the first time. The dynamic adsorption layer could successively attract the solvated Zn2+ and then promote the de-solvation of the solvated Zn2+ owing to the orientation polarization with regularly-changed applied electric field, the volume rejection effect, and strong intermolecular force towards H2O of the vertically-adsorbed Tris. Therefore, an improved Zn2+-transport kinetics as well as the inhibition of side reactions of Zn anode are successfully realized. Accordingly, the Zn||Zn symmetric cell provides an ultra-long cycle life of 2600 h. Furthermore, the Zn||MnO2 full cell with Tris could demonstrate a high capacity and structural stability for practical applications.

Controlled Synthesis of SnO2 Nanostructures as Alloy Anode via Restricted Potential Toward Building High-Performance Dual-Ion Batteries with Graphite Cathode

Dual-ion batteries (DIBs) are considered one of the promising energy storage devices in which graphite serves as a bi-functional electrode, i.e., anode and cathode in the aprotic organic solvents. Unlike conventional lithium-ion batteries (LIBs), DIBs reversibly store the cations and anions in the anode and cathodes during redox reactions, respectively. The electrolyte is a source for both cations and anions, so the choice of electrolyte plays a vital role. In the present work, the synthesis of SnO2 nanostructures is reported as a possible alternative for graphite anode, and the Li-storage performance is optimized in half-cell (Li/SnO2 ) assembly with varying amounts of conductive additive (acetylene black) and limited working potential (1 V vs Li). Finally, a DIB using recovered graphite (RG) fabricated from spent LIB as a cathode and SnO2 nanostructures as an anode under balanced loading conditions. Prior to the fabrication, both electrodes are pre-cycled to eliminate irreversibility. An in-situ impedance study has been employed to validate the passivation layer formation during the charge-discharge process. The high-performance SnO2 /RG-based DIB delivered a maximum discharge capacity of 380 mAh g-1 . The electrochemical performance of DIB has been assessed by varying temperature conditions to evaluate their suitability in different climatic conditions.

Synthesis of Iron Sulfide Nanocrystals Encapsulated in Highly Porous Carbon-Coated CNT Microsphere as Anode Materials for Sodium-Ion Batteries

Highly porous carbon materials with a rationally designed pore structure can be utilized as reservoirs for metal or nonmetal components. The use of small-sized metal or metal compound nanoparticles, completely encapsulated by carbon materials, has attracted significant attention as an effective approach to enhancing sodium ion storage properties. These materials have the ability to mitigate structural collapse caused by volume expansion during the charging process, enable short ion transport length, and prevent polysulfide elution. In this study, a concept of highly porous carbon-coated carbon nanotube (CNT) porous microspheres, which serve as excellent reservoir materials is suggested and a porous microsphere is developed by encapsulating iron sulfide nanocrystals within the highly porous carbon-coated CNTs using a sulfidation process. Furthermore, various sulfidation processes to determine the optimal method for achieving complete encapsulation are investigated by comparing the morphologies of diverse iron sulfide-carbon composites. The fully encapsulated structure, combined with the porous carbon, provides ample space to accommodate the significant volume changes during cycling. As a result, the porous iron sulfide-carbon-CNT composite microspheres exhibited outstanding cycling stability (293 mA h g-1 over 600 cycles at 1 A g-1 ) and remarkable rate capability (100 mA h g-1 at 5 A g-1 ).

10 μm-Level TiNb2 O7 Secondary Particles for Fast-Charging Lithium-Ion Batteries

TiNb2 O7 with Wadsley-Roth phase delivers double theoretical specific capacity and similar working potential in comparison to spinel Li4 Ti5 O12 , the commercial high-rate anode material, and thus can enable much higher energy density of lithium-ion batteries. However, the inter-particle resistance within the high-mass-loading TiNb2 O7 electrode would impede the capacity release for practical application, especially under fast-charging conditions. Herein, 10-20 μm-size carbon-coated TiNb2 O7 secondary particle (SP-TiNb2 O7 ) consisting of initial micro-scale TiNb2 O7 particles (MP-TiNb2 O7 ) was fabricated. The high crystallinity of active material could enable fast-charge diffusion and electrochemical reaction rate within particles, and the small number of stacking layers of SP-TiNb2 O7 could reduce the large inter-particle resistance that regular particle electrode often possess and achieve high compaction density of electrodes with high mass loading. The investigation on materials structure and electrochemical reaction kinetics verified the advances of the as-fabricated SP-TiNb2 O7 in achieving superior electrochemical performance. The SP-TiNb2 O7 exhibited high reversible capacity of 292.7 mAh g-1 in the potential range of 1-3 V (Li+ /Li) at 0.1 C, delivering high-capacity release of 94.3 %, and high capacity retention of 86 % at 0.5 C for 250 cycles in half cell configuration. Particularly, the advances of such an anode were verified in practical 5 Ah-level laminated full pouch cell. The as-assembled LiFePO4 ||TiNb2 O7 full cell exhibited a high capacity of 5.08 Ah at high charging rate of 6 C (77.9 % of that at 0.2 C of 6.52 Ah), as well as an ultralow capacity decay rate of 0.0352 % for 250 cycles at 1 C, suggesting the great potential for practical fast-charging lithium-ion batteries.

Fine-Tuning Intrinsic and Doped Hydrogenated Amorphous Silicon Thin-Film Anodes Deposited by PECVD to Enhance Capacity and Stability in Lithium-Ion Batteries

Silicon is a promising alternative to graphite as an anode material in lithium-ion batteries, thanks to its high theoretical lithium storage capacity. Despite these high expectations, silicon anodes still face significant challenges, such as premature battery failure caused by huge volume changes during charge-discharge processes. To solve this drawback, using amorphous silicon as a thin film offers several advantages: its amorphous nature allows for better stress mitigation and it can be directly grown on current collectors for material savings and improved Li-ion diffusion. Furthermore, its conductivity is easily increased through doping during its growth. In this work, we focused on a comprehensive study of the influence of both electrical and structural properties of intrinsic and doped hydrogenated amorphous silicon (aSi:H) thin-film anodes on the specific capacity and stability of lithium-ion batteries. This study allows us to establish that hydrogen distribution in the aSi:H material plays a pivotal role in enhancing battery capacity and longevity, possibly masking the significance of the conductivity in the case of doped electrodes. Our findings show that we were able to achieve high initial specific capacities (3070 mAhg-1 at the 10th cycle), which can be retained at values higher than those of graphite for a significant number of cycles (>120 cycles), depending on the structural properties of the aSi:H films. To our knowledge, this is the first comprehensive study of the influence of these properties of thin films with different doping levels and hydrogen distributions on their optimization and use as anodes in lithium-ion batteries.

Polymeric Binder Design for Sustainable Lithium-Ion Battery Chemistry

The design of binders plays a pivotal role in achieving enduring high power in lithium-ion batteries (LIBs) and extending their overall lifespan. This review underscores the indispensable characteristics that a binder must possess when utilized in LIBs, considering factors such as electrochemical, thermal, and dispersion stability, compatibility with electrolytes, solubility in solvents, mechanical properties, and conductivity. In the case of anode materials, binders with robust mechanical properties and elasticity are imperative to uphold electrode integrity, particularly in materials subjected to substantial volume changes. For cathode materials, the selection of a binder hinges on the crystal structure of the cathode material. Other vital considerations in binder design encompass cost effectiveness, adhesion, processability, and environmental friendliness. Incorporating low-cost, eco-friendly, and biodegradable polymers can significantly contribute to sustainable battery development. This review serves as an invaluable resource for comprehending the prerequisites of binder design in high-performance LIBs and offers insights into binder selection for diverse electrode materials. The findings and principles articulated in this review can be extrapolated to other advanced battery systems, charting a course for developing next-generation batteries characterized by enhanced performance and sustainability.

Rational Design of Hollow Structural Materials for Sodium-Ion Battery Anodes

The development of sodium-ion battery (SIB) anodes is still hindered by their rapid capacity decay and poor rate capabilities. Although there have been some new materials that can be used to fabricate stable anodes, SIBs are still far from wide applications. Strategies like nanostructure construction and material modification have been used to prepare more robust SIB anodes. Among all the design strategies, the hollow structure design is a promising method in the development of advanced anode materials. In the past decade, research efforts have been devoted to modifying the synthetic route, the type of templates, and the interior structure of hollow structures with high capacity and stability. A brief introduction is made to the main material systems and classifications of hollow structural materials first. Then different morphologies of hollow structural materials for SIB anodes from the latest reports are discussed, including nanoboxes, nanospheres, yolk shells, nanotubes, and other more complex shapes. The most used templates for the synthesis of hollow structrual materials are covered and the perspectives are highlighted at the end. This review offers a comprehensive discussion of the synthesis of hollow structural materials for SIB anodes, which could be potentially of use to research areas involving hollow materials design for batteries.

Smart Dual-Exsolved Self-Assembled Anode Enables Efficient and Robust Methane-Fueled Solid Oxide Fuel Cells

Perovskite oxides have emerged as alternative anode materials for hydrocarbon-fueled solid oxide fuel cells (SOFCs). Nevertheless, the sluggish kinetics for hydrocarbon conversion hinder their commercial applications. Herein, a novel dual-exsolved self-assembled anode for CH4 -fueled SOFCs is developed. The designed Ru@Ru-Sr2 Fe1.5 Mo0.5 O6-δ (SFM)/Ru-Gd0.1 Ce0.9 O2-δ (GDC) anode exhibits a unique hierarchical structure of nano-heterointerfaces exsolved on submicron skeletons. As a result, the Ru@Ru-SFM/Ru-GDC anode-based single cell achieves high peak power densities of 1.03 and 0.63 W cm-2 at 800 °C under humidified H2 and CH4 , surpassing most reported perovskite-based anodes. Moreover, this anode demonstrates negligible degradation over 200 h in humidified CH4 , indicating high resistance to carbon deposition. Density functional theory calculations reveal that the created metal-oxide heterointerfaces of Ru@Ru-SFM and Ru@Ru-GDC have higher intrinsic activities for CH4 conversion compared to pristine SFM. These findings highlight a viable design of the dual-exsolved self-assembled anode for efficient and robust hydrocarbon-fueled SOFCs.

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode

Prussian blue analogs (PBAs) show great promise as anode materials for potassium-ion batteries (PIBs) due to their high specific capacity. However, PBAs still suffer from the drawbacks of low electronic conductivity and poor structural stability, leading to inadequate rate and cyclic performance. To address these limitations, CoFe PBA nanocubes wrapped with N/S doped carbon network (CoFe PBA@NSC) as anode for PIBs is designed by using thermal-induced in situ conversion strategy. As expected, the structural advantages of nanosized PBA cubes, such as abundant interfaces and large surface area, enable the CoFe PBA@NSC electrode to demonstrate superior rate properties (557 and 131 mAh g-1 at 0.05 and 10 A g-1 ) and low capacity degradation (0.093% per cycle over 1000 cycles at 0.5 A g-1 ). Furthermore, several ex situ characterizations revealed the K-ion storage mechanism. Fe+ and Co0 are generated during potassicization, followed by a completely reversible chemical state of iron while some cobalt monomers remained during depotassication. Additionally, the as-built potassium-ion hybrid capacitor based on CoFe PBA@NSC anode exhibits a high energy density of 118 Wh kg-1 . This work presents an alternative but promising synthesis route for Prussian blue analogs, which is significant for the advancement of PIBs and other related energy storage devices.

Zinc-Bismuth Binary Alloy Enabling High-Performance Aqueous Zinc Ion Batteries

Reconfiguration of zinc anodes efficiently mitigates dendrite formation and undesirable side reactions, thus favoring the long-term cycling performance of aqueous zinc ion batteries (AZIBs). This study synthesizes a Zn@Bi alloy anode (Zn@Bi) using the fusion method, and find that the anode surfaces synthesized using this method have an extremely high percentage of Zn(002) crystalline surfaces. Experimental results indicate that the addition of bismuth inhibits the hydrogen evolution reaction and corrosion of zinc anodes. The finite-element simulation results indicate that Zn@Bi can effectively achieve a uniform anodic electric field, thereby regulating the homogeneous depositions of zinc ions and reducing the production of Zn dendrite. Theoretical calculations reveal that the incorporation of Bi favors the anode structure stabilization and higher adsorption energy of Zn@Bi corresponds to better Zn deposition kinetics. The Zn@Bi//Zn@Bi symmetric cell demonstrates an extended cycle life of 1000 h. Furthermore, when pairing Zn@Bi with an α-MnO2 cathode to construct a Zn@Bi//MnO2 cell, a specific capacity of 119.3 mAh g-1 is maintained even after 1700 cycles at 1.2 A g-1 . This study sheds light on the development of dendrite-free anodes for advanced AZIBs.

Design and Construction of Carbon-Coated Fe3 O4 /Cr2 O3 Heterostructures Nanoparticles as High-Performance Anodes for Lithium Storage

Transition metal oxides, highly motivated anodes for lithium-ion batteries due to high theoretical capacity, typically afflict by inferior conductivity and significant volume variation. Architecting heterogeneous structures with distinctive interfacial features can effectively regulate the electronic structure to favor electrochemical properties. Herein, an engineered carbon-coated nanosized Fe3 O4 /Cr2 O3 heterostructure with multiple interfaces is synthesized by a facile sol-gel method and subsequent heat treatment. Such ingenious components and structural design deliver rapid Li+ migration and facilitate charge transfer at the heterogeneous interface. Simultaneously, the strong coupling synergistic interactions between Fe3 O4 , Cr2 O3 , and carbon layers establish multiple interface structures and built-in electric fields, which accelerate ion/electron transport and effectively eliminate volume expansion. As a result, the multi-interface heterostructure, as a lithium-ion battery anode, exhibits superior cycling stability maintaining a reversible capacity of 651.2 mAh g-1 for 600 cycles at 2 C. The density functionaltheory calculations not only unravel the electronic structure of the modulation but also illustrate favorable lithium-ion adsorption kinetics. This multi-interface heterostructure strategy offers a pathway for the development of advanced alkali metal-ion batteries.

Regulating the PO4 and TiO6 Polyhedral Building Blocks in TiP2O7 Boosts the Potassium Ion Diffusion Kinetics

Achieving fast and durable potassiation/depotassiation of anode materials for potassium ion batteries (PIB) still remains an elusive yet fascinating goal. Herein, we challenge the conventional wisdom in synthesizing the TiP2O7 superstructure and report a nanocarbon coating on TiP2O7 (TiP2O7/C) using layered MXene as a Ti source to realize an effective tuning in the TiO6 and PO4 building blocks for boosting the K+ diffusion kinetics in PIB. Experimental investigations coupled with systematic theoretical simulations indicate that the interface interaction between TiP2O7 and coated nanocarbon could induce internal adjustment in individual Ti-O bonding and relieve the local distortions of TiO6 octahedra, which endows the TiP2O7/C with favorable regulation in a K+ hopping manner and significantly reduces the K+ diffusion barrier via the diffusion propagation along PO4 blocks with dominant coordination between O/P and K+. Consequently, the TiP2O7/C anode could retain 230 mA h g-1 even after 2200 long-term cycles with an ultralow degradation rate of 0.005%.

Mass Loading-Independent Lithium Storage of Transitional Metal Compounds Achieved by Multi-Dimensional Synergistic Nanoarchitecture

Nanostructured transitional metal compounds (TMCs) have demonstrated extraordinary promise for high-efficient and rapid lithium storage. However, good performance is usually limited to electrodes with low mass loading (≤1.0 mg cm-2 ) and is difficult to realize at higher mass loading due to increased electrons/ions transport limitations in the thicker electrode. Herein, the multi-dimensional synergistic nanoarchitecture design of graphene-wrapped MnO@carbon microcapsules (capsule-like MnO@C-G) is reported, which demonstrates impressive mass loading-independent lithium storage properties. Highly porous MnO nanoclusters assembled by 0D nanocrystals facilitate sufficient electrolyte infiltration and shorten the solid-state ions transport path. 1D carbon shell, 2D graphene, and 3D continuous network with tight interconnection accelerate electrons transport inside the thick electrode. The capsule-like MnO@C-G delivers ultrahigh gravimetric capacity retention of 91.0% as the mass loading increases 4.3 times, while the areal capacities increase linearly with the mass loading at various current densities. Specifically, the capsule-like MnO@C electrode delivers a remarkable areal capacity of 2.0 mAh cm-2 at a mass loading of 3.0 mg cm-2 . Moreover, the capsule-like MnO@C also demonstrates excellent performance in full battery applications. This study demonstrates the effectiveness of multi-dimensional synergistic nanoarchitecture in achieving mass loading-independent performance, which can be extended to other TMCs for electrochemical energy storage.

Advancements and Prospects of Graphite Anode for Potassium-Ion Batteries

Potassium-ion batteries (KIBs) have recently attracted considerable attention owing to their resource abundance, low cost and environmental friendliness. Graphite as a mature commercial anode material for lithium-ion batteries, has been proved as a promising anode candidate for KIBs by reversible forming potassium-graphite intercalation compounds. However, large volume expansion and sluggish K+ kinetics caused by the incompatibility between large radius of K+ and the small interlayer spacing of graphite, result in the poor cycle stability and rate performances, hindering its practical application. Extensive research efforts have focused on improving the potassium storage performance of graphite anodes. This review provides an overview of recent advances in addressing these challenges and optimizing the electrochemical performance of graphite anodes for KIBs. Various strategies to improve the electrochemical performance of graphite and graphitic carbon anodes, such as microcrystalline regulation, heteroatom doping, morphological adjustment, and coating modification, are discussed, while the critical issues and challenges associated with graphite anodes and the prospects for their advancement in KIBs are highlighted. The review offers valuable guidelines for rational structural design and promotes the commercial development of high-performance graphite anode materials for KIBs.

Synthesis of Free-Standing Tin Phosphide/Phosphate Carbon Composite Nanofibers as Anodes for Lithium-Ion Batteries with Improved Low-Temperature Performance

Free-standing tin phosphide/phosphate carbon composite nanofiber mats of unique nanostructure have been successfully synthesized by electrospinning and partially reducing the phosphate-containing precursors. An unusual effect of the Sn:P molar ratio in the precursor solution on the structure and physical-electrochemical properties of the material is observed. Physical characterizations, including X-Ray diffraction (XRD), Raman spectroscopy, X-Ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), confirm the formation of tin phosphide/phosphate nanoparticles of P-rich inner Snx P layer and Sn-rich outer layer uniformly distributed within carbon nanofiber matrix when the Sn:P=1:1. The prepared material is tested as an anode material for lithium-ion batteries and it retains 1141 mAh g-1 charge capacity after 300 cycles at a current density of 250 mA g-1 with almost 100% Coulombic efficiency at room temperature. Furthermore, it demonstrates six times higher capacity (846 mAh g-1 ) at 0 °C compared to a commercial graphite anode and stable cyclability at -20 °C and 50 mA g-1 . Post-mortem ex situ XRD and SEM analyses confirm the structural stability of the designed material and the formation of a uniform stable solid electrolyte interphase layer even after 100 cycles at 50 mA g- 1 .

Charge Storage Mechanism in Electrospun Spinel-Structured High-Entropy (Mn0.2 Fe0.2 Co0.2 Ni0.2 Zn0.2 )3 O4 Oxide Nanofibers as Anode Material for Li-Ion Batteries

High-entropy oxides (HEOs) have emerged as promising anode materials for next-generation lithium-ion batteries (LIBs). Among them, spinel HEOs with vacant lattice sites allowing for lithium insertion and diffusion seem particularly attractive. In this work, electrospun oxygen-deficient (Mn,Fe,Co,Ni,Zn) HEO nanofibers are produced under environmentally friendly calcination conditions and evaluated as anode active material in LIBs. A thorough investigation of the material properties and Li+ storage mechanism is carried out by several analytical techniques, including ex situ synchrotron X-ray absorption spectroscopy. The lithiation process is elucidated in terms of lithium insertion, cation migration, and metal-forming conversion reaction. The process is not fully reversible and the reduction of cations to the metallic form is not complete. In particular, iron, cobalt, and nickel, initially present mainly as Fe3+ , Co3+ /Co2+ , and Ni2+ , undergo reduction to Fe0 , Co0 , and Ni0 to different extent (Fe < Co < Ni). Manganese undergoes partial reduction to Mn3+ /Mn2+ and, upon re-oxidation, does not revert to the pristine oxidation state (+4). Zn2+ cations do not electrochemically participate in the conversion reaction, but migrating from tetrahedral to octahedral positions, they facilitate Li-ion transport within lattice channels opened by their migration. Partially reversible crystal phase transitions are observed.

High-Performance Sodium-Ion Batteries Enabled by 3D Nanoflowers Comprised of Ternary Sn-Based Dichalcogenides Embedded in Nitrogen and Sulfur Dual-Doped Carbon

To make sodium-ion batteries a realistic option for everyday energy storage, a practicable method is to enhance the kinetics of Na+ reactions through the development of structurally stable electrode materials. This study utilizes ternary Sn-based dichalcogenide (SnS1.5 Se0.5 ) in the design of electrode material to tackle several issues that adversely hinder the performance and longevity of sodium-ion batteries. First, the incorporation of Se into the SnS structure enhances its electrical conductivity and stability. Second, the ternary composition restricts the formation of intermediates during the desodiation/sodiation process, resulting in better electrode reaction reversibility. Finally, SnS1.5 Se0.5 lowers the diffusion barrier of Na, thereby facilitating rapid and efficient ion transport within the electrode material. Moreover, nitrogen and sulfur dual-doped carbon (NS-C) is used to enhance surface chemistry and ionic/electrical conductivity of SnS1.5 Se0.5 , leading to a pseudocapacitive storage effect that presents a promising potential for high-performance energy storage devices. The study has successfully developed a SnS1.5 Se0.5 /NS-C anode, exhibiting remarkable rate capability and cycle stability, retaining a capacity of 647 mAh g-1 even after 10 000 cycles at 5 A g-1 in half-cell tests. In full-cell tests, Na3 V2 (PO4 )3 //SnS1.5 Se0.5 /NS-C delivers a high energy density of 176.6 Wh kg-1 . In addition, the Na+ storage mechanism of SnS1.5 Se0.5 /NS-C is explored through ex situ tests and DFT calculations. The findings suggest that the ternary Sn-based dichalcogenides can considerably enhance the performance of the anode, enabling efficient large-scale storage of sodium. These findings hold great promise for the advancement of high-performance energy storage devices for practical applications.

2D-Layer-Structure Bi to Quasi-1D-Structure NiBi3 : Structural Dimensionality Reduction to Superior Sodium and Potassium Ion Storage

Layer-structured bismuth (Bi) is an attractive anode for Na-ion and K-ion batteries due to its large volumetric capacity and suitable redox potentials. However, the cycling stability and rate capability of the Bi anode are restricted by the large volume expansion and sluggish Na/K-storage kinetics. Herein, a structural dimensionality reduction strategy is proposed and developed by converting 2D-layer-structured Bi into a quasi-1D structured NiBi3 with enhanced reaction kinetics and reversibility to realize high-rate and stable cycling performance for Na/K-ion storage. As a proof of concept, the quasi-1D intermetallic NiBi3 with low formation energy, metallic conductivity, and 3D Na/K-ion diffusion pathways delivers outstanding capacity retention of 94.1% (332 mAh g-1 ) after 15 000 cycles for Na-ion storage, and high initial coulombic efficiency of 93.4% with improved capacity retention for K-ion storage. Moreover, investigations on the highly reversible Na/K-storage reaction mechanisms and cycling-driven morphology reconstruction further reveal the origins of the high reversibility and the accommodation to volume expansion. The finding of this work provides a new strategy for high-performance anode design by structural dimensionality manipulation and cycling-driven morphology reconstruction.

Nanowires Framework Supported Porous Lotus-Carbon Anode Boosts Lithium-Ion and Sodium-Ion Batteries

The novel design of carbon materials with stable nanoarchitecture and optimized electrical properties featuring simultaneous intercalation of lithium ions (Li+ ) and sodium ions (Na+ ) is of great significance for the superb lithium- sodium storage capacities. Biomass-derived carbon materials with affluent porosity have been widely studied as anodes for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). However, it remains unexplored to further enhance the stability and utilization of the porous carbon skeleton during cycles. Here, a lotus stems derived porous carbon (LPC) with graphene quantum dots (GQDs) and intrinsic carbon nanowires framework (CNF) is successfully fabricated by a self-template method. The LPC anodes show remarkable Li+ and Na+ storage performance with ultrahigh capacity (738 mA h g-1 for LIBs and 460 mA h g-1 for SIBs at 0.2 C after 300 cycles, 1C≈372 mA h g-1 ) and excellent long-term stability. Structural analysis indicates that the CNFs-supported porous structure and internal GQDs with excellent electrical conductivity contribute significantly to the dominant capacitive storage mechanism in LPC. This work provides new perspectives for developing advanced carbon-based materials for multifunctional batteries with improved stability and utilization of porous carbon frameworks during cycles.

Shotgun Metagenomics Reveals Impacts of Copper and Water Heater Anodes on Pathogens and Microbiomes in Hot Water Plumbing Systems

Hot water building plumbing systems are vulnerable to the proliferation of opportunistic pathogens (OPs), including Legionella pneumophila and Mycobacterium avium. Implementation of copper as a disinfectant could help reduce OPs, but a mechanistic understanding of the effects on the microbial community under real-world plumbing conditions is lacking. Here, we carried out a controlled pilot-scale study of hot water systems and applied shotgun metagenomic sequencing to examine the effects of copper dose (0-2 mg/L), orthophosphate corrosion control agent, and water heater anode materials (aluminum vs magnesium vs powered anode) on the bulk water and biofilm microbiome composition. Metagenomic analysis revealed that, even though a copper dose of 1.2 mg/L was required to reduce Legionella and Mycobacterium numbers, lower doses (e.g., ≤0.6 mg/L) measurably impacted the broader microbial community, indicating that the OP strains colonizing these systems were highly copper tolerant. Orthophosphate addition reduced bioavailability of copper, both to OPs and to the broader microbiome. Functional gene analysis indicated that both membrane damage and interruption of nucleic acid replication are likely at play in copper inactivation mechanisms. This study identifies key factors (e.g., orthophosphate, copper resistance, and anode materials) that can confound the efficacy of copper for controlling OPs in hot water plumbing.

Recent Advances and Challenges in Ti-Based Oxide Anodes for Superior Potassium Storage

Developing high-performance anodes is one of the most effective ways to improve the energy storage performances of potassium-ion batteries (PIBs). Among them, Ti-based oxides, including TiO2, K2Ti6O13, K2Ti4O9, K2Ti8O17, Li4Ti5O12, etc., as the intrinsic structural advantages, are of great interest for applications in PIBs. Despite numerous merits of Ti-based oxide anodes, such as fantastic chemical and thermal stability, a rich reserve of raw materials, non-toxic and environmentally friendly properties, etc., their poor electrical conductivity limits the energy storage applications in PIBs, which is the key challenge for these anodes. Although various modification projects are effectively used to improve their energy storage performances, there are still some related issues and problems that need to be addressed and solved. This review provides a comprehensive summary on the latest research progress of Ti-based oxide anodes for the application in PIBs. Besides the major impactful work and various performance improvement strategies, such as structural regulation, carbon modification, element doping, etc., some promising research directions, including effects of electrolytes and binders, MXene-derived TiO2-based anodes and application as a modifier, are outlined in this review. In addition, noteworthy research perspectives and future development challenges for Ti-based oxide anodes in PIBs are also proposed.

Superlithiation Performance of Pyridinium Polymerized Ionic Liquids with Fast Li+ Diffusion Kinetics as Anode Materials for Lithium-Ion Battery

Polymerized ionic liquids (PILs) with super ion diffusion kinetics have aroused considerable attention in rechargeable batteries, which are very promising to solve the problem of the slow ion diffusion kinetics in organic electrode materials. Theoretically, PILs incorporated redox groups are very suitable as anode materials to realize "superlithiation" performance, achieving high lithium storage capacity. In this study, redox pyridinium-based PILs (PILs-Py-400) have been synthesized through trimerization reactions by pyridinium ionic liquids with cyano groups under an appropriate temperature (400 °C). The positively charged skeleton, extended conjugated system, abundant micropores, and amorphous structure for PILs-Py-400 can boost the utilization efficiency of redox sites. A high capacity of 1643 mAh g-1 at 0.1 A g-1 (96.7% of the theoretical capacity) has been obtained, indicating intriguing 13 Li+ redox reactions in per repeating unit of one pyridinium ring, one triazine ring, and one methylene. Moreover, PILs-Py-400 exhibit excellent cycling stability with a capacity of around 1100 mAh g-1 at 1.0 A g-1 after 500 cycles, and the capacity retention is 92.2%.

Manipulating Molecular Structure to Trigger Ultrafast and Long-Life Potassium Storage of Fe0.4 Ni0.6 S Solid Solution

Currently, the main obstacle to the widespread utilization of metal chalcogenides (MSx ) as anode for potassium-ion batteries (PIBs) is their poor rate capability and inferior cycling stability as a result of the undesirable electrical conductivity and severe pulverization of the nanostructure during large K-ions intercalation-extraction processes. Herein, an ultrafast and long-life potassium storage of metal chalcogenide is rationally demonstrated by employing Fe0.4 Ni0.6 S solid-solution (FNS/C) through molecular structure engineering. Benefiting from improved electroactivity and intense interactions within the unique solid solution phase, the electrical conductivity and structure durability of Fe0.4 Ni0.6 S are vastly improved. As anticipated, the FNS/C electrode delivers superior rate properties (538.7 and 210.5 mAh g-1 at 0.1 and 10 A g-1 , respectively) and long-term cycle stability (180.8 mAh g-1 at 5 A g-1 after 2000 cycles with a capacity decay of 0.011% per cycle). Moreover, the potassium storage mechanisms of Fe0.4 Ni0.6 S solid solution are comprehensively revealed by several in situ characterizations and theoretical calculations. This innovative molecular structure engineering strategy opens avenues to achieve high-quality metal chalcogenides for future advanced PIBs.

Liquid Template Assisted Activation for "Egg Puff"-Like Hard Carbon toward High Sodium Storage Performance

The slow solid diffusion dynamics of sodium ions and the side-reaction of sodium metal plating at low potential in the hard carbon anode of sodium ion batteries (SIBs) pose significant challenges to the safety manipulation of high-rate batteries. Herein, a simple yet powerful fabricating method is reported on for "egg puff"-like hard carbon with few N doping using rosin as a precursor via liquid salt template-assisted and potassium hydroxide dual activation. The as-synthesized hard carbon delivers promising electrochemical properties in the ether-based electrolyte especially at high rates, based on the absorption mechanism of fast charge transfer. The optimized hard carbon exhibits a high specific capacity of 367 mAh g-1 at 0.05 A g-1 and 92.9% initial coulombic efficiency (ICE), 183 mAh g-1 at 10 A g-1 , and ultra-long cycle stability of reversible discharge capacity of 151 mAh g-1 after 12,000 cycles at 5 A g-1 with the average coulombic efficiency of ≈99% and the decay of 0.0026% per cycle. These studies will undoubtedly provide an effective and practical strategy for advanced hard carbon anode of SIBs based on adsorption mechanism.

Ultrastable Graphite-Potassium Anode through Binder Chemistry

Graphite with abundant reserves has attracted enormous research interest as an anode of potassium-ion batteries (PIBs) owing to its high plateau capacity of 279 mAh g-1 at ≈0.2 V in conventional carbonate electrolytes. Unfortunately, it suffers from fast capacity decay during K+ storage. Herein, an ultrastable graphite-potassium anode is developed through binder chemistry. Polyvinyl alcohol (PVA) is utilized as a water-soluble binder to generate a uniform and robust KF-rich SEI film on the graphite surface, which can not only inhibit the electrolyte decomposition, but also withstand large volume expansion during K+ -insertion. Compared to the PVDF as binder, PVA-based graphite anode can operate for over 2000 cycles (running time of 406 days at C/3) with 97% capacity retention in KPF6 -based electrolytes. The initial Coulombic efficiency (ICE) of graphite anode is as high as 81.6% using PVA as the binder, higher than that of PVDF (40.1%). Benefiting from the strong adhesion ability of PVA, a graphite||fluorophosphate K-ion full battery is further built through 3D printing, which achieves a record-high areal energy of 8.9 mWh cm-2 at a total mass loading of 38 mg cm-2 . These results demonstrate the important role of binder in developing high-performance PIBs.

Short-Range Graphitic Nanodomains in Hypocrystalline Carbon Nanotubes Realize Fast Potassium Ion Migration and Multidirection Stress Release

Defect-rich carbon materials are considered as one of the most promising anodes for potassium-ion batteries due to their enormous adsorption sites of K+ , while the realization of both rate capability and cycling stability is still greatly limited by unstable electrochemical kinetics and inevitable structure degradation. Herein, an Fe3+ -induced hydrothermal-pyrolysis strategy is reported to construct well-tailored hybrid carbon nanotubes network architecture (PP-CNT), in which the short-range graphitic nanodomains are in-situ localized in the pea pod shape hypocrystalline carbon. The N,O codoped hypocrystalline carbon region contributes to abundant defect sites for potassium ion storage, ensuring high reversible capacity. Meanwhile, the short-range graphitic nanodomains with expanded interlayer spacing facilitate stable K+ migration and fast electron transfer. Furthermore, the finite element analysis confirms the volume expansion caused by K+ intercalation can be availably buffered due to the multidirection stress release effect of the unique porous pea pod shape, endowing carbon nanotubes with superior structural integrity. Consequently, the PP-CNT anode exhibits superior potassium-storage performance, including high reversible capacity, exceptional rate capability, and ultralong cycling stability. This work opens a new avenue for the fabrication of advanced carbon materials for achieving durable and fast potassium storage.

2D Layered Materials for Fast-Charging Lithium-Ion Battery Anodes

The development of electric vehicles has received worldwide attention in the background of reducing carbon emissions, wherein lithium-ion batteries (LIBs) become the primary energy supply systems. However, commercial graphite-based anodes in LIBs currently confront significant difficulty in enduring ultrahigh power input due to the slow Li+ transport rate and the low intercalation potential. This will, in turn, cause dramatic capacity decay and lithium plating. The 2D layered materials (2DLMs) recently emerge as new fast-charging anodes and hold huge promise for resolving the problems owing to the synergistic effect of a lower Li+ diffusion barrier, a proper Li+ intercalation potential, and a higher theoretical specific capacity with using them. In this review, the background and fundamentals of fast-charging for LIBs are first introduced. Then the research progress recently made for 2DLMs used for fast-charging anodes are elaborated and discussed. Some emerging research directions in this field with a short outlook on future studies are further discussed.

Structure and Interface Engineering of Ultrahigh-Rate 3D Bismuth Anodes for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have attracted tremendous attention as promising low-cost energy storage devices in future grid-scale energy management applications. Bismuth is a promising anode for SIBs due to its high theoretical capacity (386 mAh g-1 ). Nevertheless, the huge volume variation of Bi anode during (de)sodiation processes can cause the pulverization of Bi particulates and rupture of solid electrolyte interphase (SEI), resulting in quick capacity decay. It is demonstrated that rigid carbon framework and robust SEI are two essentials for stable Bi anodes. A lignin-derived carbonlayer wrapped tightly around the bismuth nanospheres provides a stable conductive pathway, while the delicate selection of linear and cyclic ether-based electrolytes enable robust and stable SEI films. These two merits enable the long-term cycling process of the LC-Bi anode. The LC-Bi composite delivers outstanding sodium-ion storage performance with an ultra-long cycle life of 10 000 cycles at a high current density of 5 A g-1 and an excellent rate capability of 94% capacity retention at an ultrahigh current density of 100 A g-1 . Herein, the underlying origins of performance improvement of Bi anode are elucidated, which provides a rational design strategy for Bi anodes in practical SIBs.

The Review of Hybridization of Transition Metal-Based Chalcogenides for Lithium-Ion Battery Anodes

Transition metal chalcogenides as potential anodes for lithium-ion batteries have been widely investigated. For practical application, the drawbacks of low conductivity and volume expansion should be further overcome. Besides the two conventional methods of nanostructure design and the doping of carbon-based materials, the component hybridization of transition metal-based chalcogenides can effectively enhance the electrochemical performance owing to the synergetic effect. Hybridization could promote the advantages of each chalcogenide and suppress the disadvantages of each chalcogenide to some extent. In this review, we focus on the four different types of component hybridization and the excellent electrochemical performance that originated from hybridization. The exciting problems of hybridization and the possibility of studying structural hybridization were also discussed. The binary and ternary transition metal-based chalcogenides are more promising to be used as future anodes of lithium-ion batteries for their excellent electrochemical performance originating from the synergetic effect.

Double-Walled NiTeSe-NiSe2 Nanotubes Anode for Stable and High-Rate Sodium-Ion Batteries

Electrodes made of composites with heterogeneous structure hold great potential for boosting ionic and charge transfer and accelerating electrochemical reaction kinetics. Herein, hierarchical and porous double-walled NiTeSe-NiSe₂ nanotubes are synthesized by a hydrothermal process assisted in situ selenization. Impressively, the nanotubes have abundant pores and multiple active sites, which shorten the ion diffusion length, decrease Na⁺ diffusion barriers, and increase the capacitance contribution ratio of the material at a high rate. Consequently, the anode shows a satisfactory initial capacity (582.5 mA h g^-1 at 0.5 A g^-1 ), a high-rate capability, and long cycling stability (1400 cycles, 398.6 mAh g^-1 at 10 A g^-1 , 90.5% capacity retention). Moreover, the sodiation process of NiTeSe-NiSe₂ double-walled nanotubes and underlying mechanism of the enhanced performance are revealed by in situ and ex situ transmission electron microscopy and theoretical calculations.

Spinodal Decomposition Method for Structuring Germanium-Carbon Li-Ion Battery Anodes

To increase the energy density of lithium-ion batteries (LIBs), high-capacity anodes which alloy with Li ions at a low voltage against Li/Li⁺ have been actively pursued. So far, Si has been studied the most extensively because of its high specific capacity and cost efficiency; however, Ge is an interesting alternative. While the theoretical specific capacity of Ge (1600 mAh g^-1) is only half that of Si, its density is more than twice as high (Ge, 5.3 g cm^-3; Si, 2.33 g cm^-3), and therefore the charge stored per volume is better than that of Si. In addition, Ge has a 400 times higher ionic diffusivity and 4 orders of magnitude higher electronic conductivity compared to Si. However, similarly to Si, Ge needs to be structured in order to manage stresses induced during lithiation and many reports have achieved sufficient areal loadings to be commercially viable. In this work, spinodal decomposition is used to make secondary particles of about 2 μm in diameter that consist of a mixture of ∼30 nm Ge nanoparticles embedded in a carbon matrix. The secondary structure of these germanium-carbon particles allows for specific capacities of over 1100 mAh g^-1 and a capacity retention of 91.8% after 100 cycles. Finally, high packing densities of ∼1.67 g cm^-3 are achieved in blended electrodes by creating a bimodal size distribution with natural graphite.

Asymmetric Swelling Behaviors of High-Energy-Density Lithium-Ion Batteries with a SiOx /Graphite Composite Anode

The battery swelling originated from the electrode swelling is a big obstacle for the practical application of high-energy-density lithium-ion batteries (HED-LIBs). Herein, the HED-LIBs are constructed by SiO_x /graphite composite anode and LiNi_0.8 Co_0.1 Mn_0.1 O₂ (NCM811) cathode and their swelling behaviors are investigated at the cell, electrode, and particle scales. there are three expansion stages during the charging while one expansion followed by two contraction stages during the discharging process. The expansion ratio is in direct proportion to the ratio of SiO_x content and about 10 times larger than that of the cathode. A 100 nm thick double-layer solid electrolyte interface, comprises LiF, Li₂ O, and Li₂ CO₃ , forms on the surface of the SiO_x particles, and evolves into a 300 nm thick triple-layer after cycling. The performance degradation of HED-LIBs is associated with the expansion of anodes, increase in resistance, and consumption of Li in the anodes during cycling. This study is expected to guide the future selection and design of HED-LIBs and battery packs.

Universal Renaissance Strategy of Metal Fluoride in Secondary Ion Batteries Enabled by Liquid Metal Gallium

All-solid-state alkali ion batteries represent a future trend in battery technology, as well as provide an opportunity for low-cost metal fluoride electrode materials, if certain intrinsic problems can be resolved. In this work, a liquid metal activation strategy is proposed in which liquid Ga elements are generated in situ and doped into the LiF crystal structure by introducing a small amount of GaF₃ . Benefiting from these two Ga states of existence, in which the liquid metal Ga can continuously maintain conformable ion/electron-transport networks, while doped Ga in the LiF crystal structure catalyzes LiF splitting, the lithium-ion storage capacity of MnF₂ significantly increases by 87%. A similar effect can be obtained in FeF₃ , where the sodium-ion storage capacity is enhanced by 33%. This universal strategy with few restrictions can be used to realize a complete renaissance of metal fluorides, as well as offer an opportunity for the new application of liquid metals in the field of energy storage.

Surface Stretching Enables Highly Disordered Graphitic Domains for Ultrahigh Rate Sodium Storage

Hard carbons (HCs) with high sloping capacity are considered as the leading candidate anode for sodium-ion batteries (SIBs); nevertheless, achieving basically complete slope-dominated behavior with high rate capability is still a big challenge. Herein, the synthesis of mesoporous carbon nanospheres with highly disordered graphitic domains and MoC nanodots modification via a surface stretching strategy is reported. The MoO_x surface coordination layer inhibits the graphitization process at high temperature, thus creating short and wide graphite domains. Meanwhile, the in situ formed MoC nanodots can greatly promote the conductivity of highly disordered carbon. Consequently, MoC@MCNs exhibit an outstanding rate capacity (125 mAh g^-1 at 50 A g^-1 ). The "adsorption-filling" mechanism combined with excellent kinetics is also studied based on the short-range graphitic domains to reveal the enhanced slope-dominated capacity. The insight in this work encourages the design of HC anodes with dominated slope capacity toward high-performance SIBs.

In Situ Mesopore Formation in SiOx Nanoparticles by Chemically Reinforced Heterointerface and Use of Chemical Prelithiation for Highly Reversible Lithium-Ion Battery Anode

SiO_x is a promising next-generation anode material for lithium-ion batteries. However, its commercial adoption faces challenges such as low electrical conductivity, large volume expansion during cycling, and low initial Coulombic efficiency. Herein, to overcome these limitations, an eco-friendly in situ methodology for synthesizing carbon-containing mesoporous SiO_x nanoparticles wrapped in another carbon layers is developed. The chemical reactions of vinyl-terminated silanes are designed to be confined inside the cationic surfactant-derived emulsion droplets. The polyvinylpyrrolidone-based chemical functionalization of organically modified SiO₂ nanoparticles leads to excellent dispersion stability and allows for intact hybridization with graphene oxide sheets. The formation of a chemically reinforced heterointerface enables the spontaneous generation of mesopores inside the thermally reduced SiO_x nanoparticles. The resulting mesoporous SiO_x -based nanocomposite anodes exhibit superior cycling stability (≈100% after 500 cycles at 0.5 A g^-1 ) and rate capability (554 mAh g^-1 at 2 A g^-1 ), elucidating characteristic synergetic effects in mesoporous SiO_x -based nanocomposite anodes. The practical commercialization potential with a significant enhancement in initial Coulombic efficiency through a chemical prelithiation reaction is also presented. The full cell employing the prelithiated anode demonstrated more than 2 times higher Coulombic efficiency and discharge capacity compared to the full cell with a pristine anode.

Terminal Group-Oriented Self-Assembly to Controllably Synthesize a Layer-by-Layer SnSe2 and MXene Heterostructure for Ultrastable Lithium Storage

Heterostructured materials integrate the advantages of adjustable electronic structure, fast electron/ions transfer kinetics, and robust architectures, which have attracted considerable interest in the fields of rechargeable batteries, photo/electrocatalysis, and supercapacitors. However, the construction of heterostructures still faces some severe problems, such as inferior random packing of components and serious agglomeration. Herein, a terminal group-oriented self-assembly strategy to controllably synthesize a homogeneous layer-by-layer SnSe₂ and MXene heterostructure (LBL-SnSe₂ @MXene) is designed. Benefitting from the abundant polar terminal groups on the MXene surface, Sn²⁺ is induced into the interlayer of MXene with large interlayer spacing, which is selenized in situ to obtain LBL-SnSe₂ @MXene. In the heterostructure, SnSe₂ layers and MXene layers are uniformly intercalated in each other, superior to other heterostructures formed by random stacking. As an anode for lithium-ion batteries, the LBL-SnSe₂ @MXene is revealed to possess strong lithium adsorption ability, the small activation energy for lithium diffusion, and excellent structure stability, thus achieving outstanding electrochemical performance, especially with high specific capacities (1311 and 839 mAh g^-1 for initial discharge and charge respectively) and ultralong cycling stability (410 mAh g^-1 at 5C even after 16 000 cycles). This work conveys an inspiration for the controllable design and construction of homogeneous layered heterostructures.

On the Road to the Frontiers of Lithium-Ion Batteries: A Review and Outlook of Graphene Anodes

Graphene has long been recognized as a potential anode for next-generation lithium-ion batteries (LIBs). The past decade has witnessed the rapid advancement of graphene anodes, and considerable breakthroughs are achieved so far. In this review, the aim is to provide a research roadmap of graphene anodes toward practical LIBs. The Li storage mechanism of graphene is started with and then the approaches to improve its electrochemical performance are comprehensively summarized. First, morphologically engineered graphene anodes with porous, spheric, ribboned, defective and holey structures display improved capacity and rate performance owing to their highly accessible surface area, interconnected diffusion channels, and sufficient active sites. Surface-modified graphene anodes with less aggregation, fast electrons/ions transportation, and optimal solid electrolyte interphase are discussed, demonstrating the close connection between the surface structure and electrochemical activity of graphene. Second, graphene derivatives anodes prepared by heteroatom doping and covalent functionalization are outlined, which show great advantages in boosting the Li storage performances because of the additionally introduced defect/active sites for further Li accommodation. Furthermore, binder-free and free-standing graphene electrodes are presented, exhibiting great prospects for high-energy-density and flexible LIBs. Finally, the remaining challenges and future opportunities of practically available graphene anodes for advanced LIBs are highlighted.

A Safer High-Energy Lithium-Ion Capacitor Using Fast-Charging and Stable ω-Li3 V2 O5 Anode

Lithium-ion capacitors (LICs) are flourishing toward high energy density and high safety, which depend significantly on the performance of the intercalation-type anodes used in LICs. However, commercially available graphite and Li₄ Ti₅ O₁₂ anodes in LICs suffer from inferior electrochemical performance and safety risks due to limited rate capability, energy density, thermal decomposition, and gassing issues. Here a safer high-energy LIC based on a fast-charging ω-Li₃ V₂ O₅ (ω-LVO) anode with a stable bulk/interface structure is reported. The electrochemical performance, thermal safety, and gassing behavior of the ω-LVO-based LIC device are investigated, followed by the exploration of the stability of the ω-LVO anode. The ω-LVO anode exhibits fast lithium-ion transport kinetics at room/elevated temperatures. Paired with an active carbon (AC) cathode, the AC||ω-LVO LIC with high energy density and long-term endurability is achieved. The accelerating rate calorimetry, in situ gas assessment, and ultrasonic scanning imaging technologies further verify the high safety of the as-fabricated LIC device. Theoretical and experimental results unveil that the high safety originates from the high structure/interface stability of the ω-LVO anode. This work provides important insights into electrochemical/thermochemical behaviors of ω-LVO-based anodes within LICs and offers new opportunities to develop safer high-energy LIC devices.

Cross-Linked Sodium Alginate as A Multifunctional Binder to Achieve High-Rate and Long-Cycle Stability for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) hold great promise owing to the naturally abundant sodium resource and high safety. The research focus of SIBs is usually directed toward electrode materials, while the binder as an important component is rarely investigated. Herein, a cross-linked sodium alginate (SA)/graphene oxide (GO) binder is judiciously designed to serve as a robust artificial interphase on the surface of both anode and cathode of SIBs. Benefiting from the cross-linking continuous network structure as well as the highly hydrophilic nature, the SA-GO binder possesses a large tensile strength of 197.7 Mpa and a high ionic conductivity of 0.136 mS cm^-1 , superior to pure SA (93.8 Mpa, 0.025 mS cm^-1 ). Moreover, the structural design of SA-GO binder exhibits a strong binding ability to guarantee structural integrity during cycling. To demonstrate its effectiveness, polyanion-type phosphates (e.g., Na₃ (VO)₂ (PO₄ )₂ F) and chalcogenides (e.g., MoS₂ , VS₂ ) are adopted as cathode and anode materials of SIBs, respectively. As compared to traditional binders (e.g., PVDF, SA), electrodes with the SA-GO binder exhibits significantly increased rate capability and cycling stability, such as Na₃ (VO)₂ (PO₄ )₂ F (40 C fast-charge, 84% capacity retention after 1000 cycles). This work highlights the role of novel aqueous-based binders in developing next-generation sodium-storage devices.

Noncrystalline Carbon Anodes for Advanced Sodium-Ion Storage

Developing an anode with excellent rate performance, long-cycle stability, high coulombic efficiency, and high specific capacity is one of the key research directions of sodium-ion batteries. Among all the anode materials, noncrystalline carbon (NCC) has great possibilities according to its supreme performance and low cost, but with the complexity and variability of the structure. With the in-depth study of the sodium storage behaviors of NCC in recent years, three modes of interlayer intercalation, clustering into micropores, and adsorption are reported and summarized. Although the storage mechanism has gradually become more evident, the complex behavior of the ions at different voltage regions, especially in the low-voltage (plateau) region, still remains controversial. It is essential to understand further the relationship between ions and NCC structure during energy storage processes. Based on the summary of previous works, this article has reviewed the storage mechanism of sodium ions in NCC and evaluated the structure-behavior relationship between sodium-ion storage and the carbon structure.

Chloride-Free Electrolytes for High-Voltage Magnesium Metal Batteries: Challenges, Strategies, and Perspectives

The demand for high-energy-density and safe energy storage devices has spurred increasing interest in high-voltage rechargeable magnesium batteries (RMB). As electrolytes are the bridge connecting the cathode and anode materials, the development of high-voltage electrolytes is the key factor in realizing high-voltage RMBs. This concept presents an overview of three chloride-free electrolyte systems with wide electrochemical windows, together with the degradation mechanisms and modification strategies at the anode/electrolyte interphase. Finally, future directions in stabilizing Mg anodes and realizing high-voltage RMBs are highlighted.

Robust Biomass-Derived Carbon Frameworks as High-Performance Anodes in Potassium-Ion Batteries

Potassium-ion batteries (PIBs) have become one of the promising candidates for electrochemical energy storage that can provide low-cost and high-performance advantages. The poor cyclability and rate capability of PIBs are due to the intensive structural change of electrode materials during battery operation. Carbon-based materials as anodes have been successfully commercialized in lithium- and sodium-ion batteries but is still struggling in potassium-ion battery field. This work conducts structural engineering strategy to induce anionic defects within the carbon structures to boost the kinetics of PIBs anodes. The carbon framework provides a strong and stable structure to accommodate the volume variation of materials during cycling, and the further phosphorus doping modification is shown to enhance the rate capability. This is found due to the change of the pore size distribution, electronic structures, and hence charge storage mechanism. The optimized electrode in this work shows a high capacity of 175 mAh g^-1 at a current density of 0.2 A g^-1 and the enhancement of rate performance as the PIB anode (60% capacity retention with the current density increase of 50 times). This work, therefore provides a rational design for guiding future research on carbon-based anodes for PIBs.

A BF3 -Doped MXene Dual-Layer Interphase for a Reliable Lithium-Metal Anode

A dual-layer interphase that consists of an in-situ-formed lithium carboxylate organic layer and a thin BF₃ -doped monolayer Ti₃ C₂ MXene on Li metal is reported. The honeycomb-structured organic layer increases the wetting of electrolyte, leading to a thin solid electrolyte interface (SEI). While the BF₃ -doped monolayer MXene provides abundant active sites for lithium homogeneous nucleation and growth, resulting in about 50% reduced thickness of inorganic-rich components among the SEI layer. A low overpotential of less than 30 mV over 1000 h cycling in symmetric cells is received. The functional BF₃  groups, along with the excellent electronic conductivity and smooth surface of the MXene, greatly reduce the lithium plating/stripping energy barrier, enabling a dendrite-free lithium-metal anode. The battery with this dual-layer coated lithium metal as the anode displays greatly improved electrochemical performance. A high capacity-retention of 175.4 mAh g^-1 at 1.0 C is achieved after 350 cycles. In a pouch cell with a capacity of 475 mAh, the battery still exhibits a high discharge capacity of 165.6 mAh g^-1 with a capacity retention of 90.2% after 200 cycles. In contrast to the fast capacity decay of pure Li metal, the battery using NCA as the cathode also displays excellent capacity retention in both coin and pouch cells. The dual-layer modified surface provides an effective approach in stabilizing the Li-metal anode.

Insights into Electrolytic Pre-Lithiation: A Thorough Analysis Using Silicon Thin Film Anodes

Pre-lithiation via electrolysis, herein defined as electrolytic pre-lithiation, using cost-efficient electrolytes based on lithium chloride (LiCl), is successfully demonstrated as a proof-of-concept for enabling lithium-ion battery full-cells with high silicon content negative electrodes. An electrolyte for pre-lithiation based on γ-butyrolactone and LiCl is optimized using boron-containing additives (lithium bis(oxalato)borate, lithium difluoro(oxalate)borate) and CO₂ with respect to the formation of a protective solid electrolyte interphase (SEI) on silicon thin films as model electrodes. Reversible lithiation in Si||Li metal cells is demonstrated with Coulombic efficiencies (C_Eff ) of 95-96% for optimized electrolytes comparable to 1 m LiPF₆ /EC:EMC 3:7. Formation of an effective SEI is shown by cyclic voltammetry and X-ray photoelectron spectroscopy (XPS). electrolytic pre-lithiation experiments show that notable amounts of the gaseous product Cl₂ dissolve in the electrolyte leading to a self-discharge Cl₂ /Cl^- shuttle mechanism between the electrodes lowering pre-lithiation efficiency and causing current collector corrosion. However, no significant degradation of the Si active material and the SEI due to contact with elemental chlorine is found by SEM, impedance, and XPS. In NCM111||Si full-cells, the capacity retention in the 100th cycle can be significantly increased from 54% to 78% by electrolytic pre-lithiation, compared to reference cells without pre-lithiation of Si.

Highly Stable Sb/C Anode for K+ and Na+ Energy Storage Enabled by Pulsed Laser Ablation and Polydopamine Coating

Potassium- and sodium-ion batteries (PIBs and SIBs) have great potential as the next-generation energy application owing to the natural abundance of K and Na. Antimony (Sb) is a suitable alloying-type anode for PIBs and SIBs due to its high theoretical capacity and proper operation voltage; yet, the severe volume variation remains a challenge. Herein, a preparation of N-doped carbon-wrapped Sb nanoparticles (L-Sb/NC) using pulsed laser ablation and polydopamine coating techniques, is reported. As the anode for PIB and SIB, the L-Sb/NC delivers superior rate capabilities and excellent cycle stabilities (442.2 and 390.5 mA h g^-1 after 250 cycles with the capacity decay of 0.037% and 0.038% per cycle) at the current densities of 0.5 and 1.0 A g^-1 , respectively. Operando X-ray diffraction reveals the facilitated and stable potassiation and sodiation mechanisms of L-Sb/NC enabled by its optimal core-shell structure. Furthermore, the SIB full cell fabricated with L-Sb/NC and Na₃ V₂ (PO₄ )₂ F₃ shows outstanding electrochemical performances, demonstrating its practical energy storage application.