One-Step Construction of Closed Pores Enabling High Plateau Capacity Hard Carbon Anodes for Sodium-Ion Batteries: Closed-Pore Formation and Energy Storage Mechanisms

Closed pores play a crucial role in improving the low-voltage (<0.1 V) plateau capacity of hard carbon anodes for sodium-ion batteries (SIBs). However, the lack of simple and effective closed-pore construction strategies, as well as the unclear closed-pore formation mechanism, has severely hindered the development of high plateau capacity hard carbon anodes. Herein, we present an effective closed-pore construction strategy by one-step pyrolysis of zinc gluconate (ZG) and elucidate the corresponding mechanism of closed-pore formation. The closed-pore formation mechanism during the pyrolysis of ZG mainly involves (i) the precipitation of ZnO nanoparticles and the ZnO etching on carbon under 1100 °C to generate open pores of 0.45-4 nm and (ii) the development of graphitic domains and the shrinkage of the partial open pores at 1100-1500 °C to convert the open pores to closed pores. Benefiting from the considerable closed-pore content and suitable microstructure, the optimized hard carbon achieves an ultrahigh reversible specific capacity of 481.5 mA h g-1 and an extraordinary plateau capacity of 389 mA h g-1 for use as the anode of SIBs. Additionally, some in situ and ex situ characterizations demonstrate that the high-voltage slope capacity and the low-voltage plateau capacity stem from the adsorption of Na+ at the defect sites and Na-cluster formation in closed pores, respectively.

A Feasible Dual Modification Strategy of Internal Anion Redox Chemistry and Surface Engineering on P2 Layer-Structured Cathodes in Sodium-Ion Batteries

Boosting the anion redox reaction opens up a possibility of further capacity enhancement on transition-metal-ion redox-only layer-structured cathodes for sodium-ion batteries. To mitigate the deteriorating impact on the internal and surface structure of the cathode caused by the inevitable increase in the operation voltage, probing a solution to promote the bulk-phase crystal structure stability and surface chemistry environment to further facilitate the electrochemical performance enhancement is a key issue. A dual modification strategy of establishing an anion redox hybrid activation trigger agent inside the crystal structure in combination with surface oxide coating is successfully developed. P2-type layer structure cathode materials with Zn/Li (Na-O-Zn@Na-O-Li) anion redox hybrid triggers and a ZnO coating layer possess superior capacity and cycle performance, along with outstanding structural stability, decreased Mn-ion dissolution effect, and less crystal particle cracking during the cycling process. This study represents a facile modification solution to perform structure optimization and property enhancement toward high-performance layered structure cathode materials with anion redox features in sodium-ion batteries.

High Capacity and Fast Kinetics Enabled by Metal-Doping in Prussian Blue Analogue Cathodes for Sodium-Ion Batteries

Prussian blue analogues (PBAs) have gained tremendous attention as promising low-cost electrochemically-tunable electrode materials, which can accommodate large Na+ ions with attractive specific capacity and charge-discharge kinetics. However, poor cycling stability caused by lattice strain and volume change remains to be improved. Herein, metal-doping strategy has been demonstrated in FeNiHCF, Na1.40Fe0.90Ni0.10[Fe(CN)6]0.85·1.3H2O, delivering a capacity as high as 148 mAh g‒1 at 10 mA g‒1. At an exceptionally high rate of 25.6 A g‒1, a reversible capacity of ~55 mAh g‒1 still can be obtained with a very small capacity decay rate of 0.02% per cycle for 1000 cycles, considered one of the best among all metal-doped PBAs. This exhibits the stabilizing effect of Ni doping which enhances structural stability and long-term cyclability. In situ synchrotron X-ray diffraction reveals an extremely small (~1%) change in unit cell parameters. The Ni substitution is found to increase the electronic conductivity and redox activity, especially at the low-spin (LS) Fe center due to inductive effect. This larger capacity contribution from LS Fe2+C6/Fe3+C6 redox couple is responsible for stable high-rate capability of FeNiHCF. The insight gained in this work may pave the way for the design of other high-performance electrode materials for sustainable sodium-ion batteries.

Ion Dynamics at the Intermediate Charging State of the Sodium Vanadium Fluorophosphate Cathode

Na super ionic conductor (NASICON)-type polyanionic vanadium fluorophosphate Na3V2O2(PO4)2F (NVOPF) is a promising cathode material for high-energy sodium-ion batteries. The dynamic diffusion and exchange of sodium ions in the lattice of NVOPF are crucial for its electrochemical performance. However, standard characterizations are mostly focused on the as-synthesized material without cycling, which is different from the actual battery operation conditions. In this work, we investigated the hopping processes of sodium in NVOPF at the intermediate charging state with 23Na solid-state nuclear magnetic resonance (ssNMR) and density functional theory (DFT) calculations. Our experimental characterizations revealed six distinct sodium coordination sites in the intermediate structure and determined the exchange rates among these sites at variable temperatures. The theoretical calculations showed that these dynamic processes correspond to different ion transport pathways in the crystalline lattice. Our combined experimental and theoretical study uncovered the underlying mechanisms of the ion transport in cycled NVOPF and these understandings may help the optimization of cathode materials for sodium-ion batteries.

Enhancing Kinetics in Sodium Super Ion Conductor Na3MnTi(PO4)3 through Microbe-Assisted and Structural Optimization

Sodium (Na) super ion conductor (NASICON) structure Na3MnTi(PO4)3 (NMTP) is considered a promising cathode for sodium-ion batteries due to its reversible three-electron reaction. However, the inferior electronic conductivity and sluggish reaction kinetics limit its practical applications. Herein, we successfully constructed a three-dimensional cross-linked porous architecture NMTP material (AsN@NMTP/C) by a natural microbe of Aspergillus niger (AsN), and the structure of different NMTP cathodes was optimized by adjusting different transition metal Mn/Ti ratios. Both approaches effectively altered the three-dimensional NMTP structure, not only improving electronic conductivity and controlling Na+ diffusion pathways but also enhancing the electrochemical kinetics of the material. The resultant AsN@NMTP/C-650, sintered at 650 °C, exhibits better electrochemical performance with higher reversible three-electron reactions corresponding to the voltage platforms of Ti4+/3+, Mn3+/2+, and Mn4+/3+ around 2.1, 3.6, and 4.1 V (vs Na+/Na), respectively. The capacity retention rate is up to 89.3% after 1000 cycles at a 2C rate. Moreover, a series of results confirms that the Na3.4Mn1.2Ti0.8(PO4)3 cathode has the most excellent electrochemical performance when the Mn/Ti ratio is 1.2/0.8, with a high capacity of 96.59 mAh g-1 and 97.1% capacity retention after 500 cycles.

High-Voltage Na0.76Ni0.25-x/2Mgx/2Mn0.75O2-xFx Cathode Improved by One-Step In Situ MgF2 Doping with Superior Low-Temperature Performance and Extra-Stable Air Stability

P2-NaxMnO2 has garnered significant attention due to its favorable Na+ conductivity and structural stability for large-scale energy storage fields. However, achieving a balance between high energy density and extended cycling stability remains a challenge due to the Jahn-Teller distortion of Mn3+ and anionic activity above 4.1 V. Herein, we propose a one-step in situ MgF2 strategy to synthesize a P2-Na0.76Ni0.225Mg0.025Mn0.75O1.95F0.05 cathode with improved Na-storage performance and decent water/air stability. By partially substituting cost-effective Mg for Ni and incorporating extra F for O, the optimized material demonstrates both enhanced capacity and structure stability via promoting Ni2+/Ni4+ and oxygen redox activity. It delivers a high capacity of 132.9 mA h g-1 with an elevated working potential of ≈3.48 V and maintains ≈83.0% capacity retention after 150 cycles at 100 mA g-1 within 2-4.3 V, compared to the 114.9 mA h g-1 capacity and 3.32 V discharging potential of the undoped Na0.76Ni0.25Mn0.75O2. While increasing the charging voltage to 4.5 V, 133.1 mA h g-1 capacity and 3.55 V discharging potential (vs Na/Na+) were achieved with 72.8% capacity retention after 100 cycles, far beyond that of the pristine sample (123.7 mA h g-1, 3.45 V, and 43.8%@100 cycles). Moreover, exceptional low-temperature cycling stability is achieved, with 95.0% after 150 cycles. Finally, the Na-storage mechanism of samples employing various doping strategies was investigated using in situ EIS, in situ XRD, and ex situ XPS techniques.

Unveil the origin of voltage oscillation for sodium-ion batteries operating at -40 °C

Voltage oscillation at subzero in sodium-ion batteries (SIBs) has been a common but overlooked scenario, almost yet to be understood. For example, the phenomenon seriously deteriorates the performance of Na3V2(PO4)3 (NVP) cathode in PC (propylene carbonate)/EC (ethylene carbonate)-based electrolyte at -20 °C. Here, the correlation between voltage oscillation, structural evolution, and electrolytes has been revealed based on theoretical calculations, in-/ex-situ techniques, and cross-experiments. It is found that the local phase transition of the Na3V2(PO4)3 (NVP) cathode in PC/EC-based electrolyte at -20 °C should be responsible for the oscillatory phenomenon. Furthermore, the low exchange current density originating from the high desolvation energy barrier in NVP-PC/EC system also aggravates the local phase transformation, resulting in severe voltage oscillation. By introducing the diglyme solvent with lower Na-solvent binding energy, the voltage oscillation of the NVP can be eliminated effectively at subzero. As a result, the high capacity retentions of 98.3% at -20 °C and 75.3% at -40 °C are achieved. The finding provides insight into the abnormal SIBs degradation and brings the voltage oscillation behavior of rechargeable batteries into the limelight.

Synergistic Strain Suppressing and Interface Engineering in Na4MnV(PO4)3/C for Wide-Temperature and Long-Calendar-Life Sodium-Ion Storage

A Na4MnV(PO4)3 (NMVP) cathode is regarded as a promising cathode candidate for sodium-ion batteries (SIBs). However, issues such as low electronic conductivity and partial cation dissolution contribute to high polarization and structure distortion. Herein, we engineered the local electron density and reaction kinetic properties of NMVP cathodes with varying oxygen vacancies by introducing varying amounts of Zr doping and carbon coating. The optimized sample exhibited a high-rate capacity of 71.8 mAh g-1 at 30 C (83.1% capacity retention after 1000 cycles) and excellent performance over a wide temperature range (84.1 mAh g-1 at 60 °C and 61.4 mAh g-1 at -30 °C). In situ X-ray diffraction technology confirmed a redox solid solution and a two-phase reaction mechanism, revealing minor changes in cell volume and slight strain variations after Zr doping, effectively suppressing the structural distortion. Theoretical calculations illustrated that Zr doping largely shrinks the band gap of NMVP, enriches local electron density, and slightly alters the local element distribution and bond lengths. Moreover, full-cells have shown high energy density (259.9 Wh kg-1) and outstanding cycling stability (200 cycles). The work provides fresh insights into the synergistic effect of strain suppressing and interface engineering in promoting the development of wide temperature range and long-calendar-life SIBs.

Design of Na3MnZr(PO4)3/Carbon Nanofiber Free-Standing Cathodes for Sodium-Ion Batteries with Enhanced Electrochemical Performances through Different Electrospinning Approaches

The NASICON-structured Na3MnZr(PO4)3 compound is a promising high-voltage cathode material for sodium-ion batteries (SIBs). In this study, an easy and scalable electrospinning approach was used to synthesize self-standing cathodes based on Na3MnZr(PO4)3 loaded into carbon nanofibers (CNFs). Different strategies were applied to load the active material. All the employed characterization techniques (X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and Raman spectroscopy) confirmed the successful loading. Compared to an appositely prepared tape-cast electrode, Na3MnZr(PO4)3/CNF self-standing cathodes demonstrated an enhanced specific capacity, especially at high C-rates, thanks to the porous conducive carbon nanofiber matrix. Among the strategies applied to load Na3MnZr(PO4)3 into the CNFs, the electrospinning (vertical setting) of the polymeric solution containing pre-synthesized Na3MnZr(PO4)3 powders resulted effective in obtaining the quantitative loading of the active material and a homogeneous distribution through the sheet thickness. Notably, Na3MnZr(PO4)3 aggregates connected to the CNFs, covered their surface, and were also embedded, as demonstrated by TEM and EDS. Compared to the self-standing cathodes prepared with the horizontal setting or dip-drop coating methods, the vertical binder-free electrode exhibited the highest capacity values of 78.2, 55.7, 38.8, 22.2, 16.2, 12.8, 10.3, 9.0, and 8.5 mAh/g at C-rates of 0.05C, 0.1C, 0.2C, 0.5C, 1C, 2C, 5C, 10C, and 20C, respectively, with complete capacity retention at the end of the measurements. It also exhibited a good cycling life, compared to its tape-cast counterpart: it displayed higher capacity retention at 0.2C and 1C, and, after cycling 1000 cycles at 1C, it could be further cycled at 5C, 10C, and 20C.

Achieving High-Rate and Stable Sodium-Ion Storage by Constructing Okra-Like NiS2/FeS2@Multichannel Carbon Nanofibers

Transition metal sulfides (TMSs) are considered as promising anode materials for sodium-ion batteries (SIBs) due to their high theoretical capacities. However, the relatively low electrical conductivity, large volume variation, and easy aggregation/pulverization of active materials seriously hinder their practical application. Herein, okra-like NiS2/FeS2 particles encapsulated in multichannel N-doped carbon nanofibers (NiS2/FeS2@MCNFs) are fabricated by a coprecipitation, electrospinning, and carbonization/sulfurization strategy. The combined advantages arising from the hollow multichannel structure in carbon skeleton and heterogeneous NiS2/FeS2 particles with rich interfaces can provide facile ion/electron transfer paths, ensure boosted reaction kinetics, and help maintain the structural integrity, thereby resulting in a high reversible capacity (457 mA h g-1 at 1 A g-1), excellent rate performance (350 mA h g-1 at 5 A g-1), and outstanding long-term cycling stability (93.5% retention after 1100 cycles). This work provides a facile and efficient synthetic strategy to develop TMS-based heterostructured anode materials with high-rate and stable sodium storage properties.

One-step Solid-State Synthesis of V1.13Se2/V2O3 Heterostructure as a High Pseudocapacitance Anode for Fast-Charging Sodium-Ion Batteries

Sodium-ion batteries (SIBs) offer several benefits, including cost-efficiency and fast-charging characteristics, positioning them as attractive substitutes for lithium-ion batteries in energy storage applications. However, the inferior capacity and cycling stability of electrodes in SIBs necessitate further enhancement due to sluggish reaction kinetics. In this respect, the utilization of heterostructures, which can provide an inherent electric field and abundant active sites on the surface, has emerged as a promising strategy for augmenting the cycling stability and rate features of the electrodes. This work delves into the utilization of V1.13Se2/V2O3 heterostructure materials as anodes, initially fabricated via a simplified one-step solid-state sintering technique. The high pseudocapacitance and low characteristic relaxation time constant give the V1.13Se2/V2O3 heterostructure impressive properties, such as a high capacity of 328.5 mAh g-1 even after 1500 cycles at a high current density of 2 A g-1 and rate capability of 278.9 mAh g-1 at 5 A g-1. Moreover, the assembled sodium-ion full battery delivers a capacity of 118.5 mAh g-1 after 1000 cycles at 1 A g-1. These findings provide novel insight and guidance for the rapid synthesis of heterojunction materials and the advancement of SIBs.

Capacitive-Controlled Prussian White with a Nickel Iron Hexacyanoferrate Composite Cathode for Rapid Sodium Diffusion

Prussian blue analogues receive tremendous attention owing to their spacious three-dimensional skeleton, high theoretical specific capacity, facile synthesis procedure, and high cost-effectiveness as among the most promising candidates for cathode materials in sodium-ion batteries (SIBs). Nonetheless, the practical specific capacity, especially under high current, is particularly frail due to the sluggish ion diffusion. In this study, the strategy of Ni substitution and formation of water-coordinated Fe is applied to lower the crystal field energy and elevate the active low-spin (LS) Fe content, which leads to a capacitive sodium storage mechanism, resulting in a substantial specific capacity under high current density. The delivered specific capacity of PW-325@2NiFe-55 is 95 mAh g-1 at 50 C, which is 72.5% capacity retention of the one at 0.5 C. Also, it maintains 80.2% of its initial specific capacity after 500 cycles at 5 C. Furthermore, a hypothesis of a joint diffusion-controlled and capacitive mechanism for high-spin (HS) Fe and a mere capacitive mechanism for LS Fe is put forward and verified through potentiastatic tests, operando 57Fe Mössbauer spectroscopy, and ex situ XRD, which provides a new horizon to enhance the electrochemical performance for SIBs.

Boosting Sodium Compensation Efficiency via a CNT/MnO2 Catalyst toward High-Performance Na-Ion Batteries

The formation of a solid electrolyte interphase on carbon anodes causes irreversible loss of Na+ ions, significantly compromising the energy density of Na-ion full cells. Sodium compensation additives can effectively address the irreversible sodium loss but suffer from high decomposition voltage induced by low electrochemical activity. Herein, we propose a universal electrocatalytic sodium compensation strategy by introducing a carbon nanotube (CNT)/MnO2 catalyst to realize full utilization of sodium compensation additives at a much-reduced decomposition voltage. The well-organized CNT/MnO2 composite with high catalytic activity, good electronic conductivity, and abundant reaction sites enables sodium compensation additives to decompose at significantly reduced voltages (from 4.40 to 3.90 V vs Na+/Na for sodium oxalate, 3.88 V for sodium carbonate, and even 3.80 V for sodium citrate). As a result, sodium oxalate as the optimal additive achieves a specific capacity of 394 mAh g-1, almost reaching its theoretical capacity in the first charge, increasing the energy density of the Na-ion full cell from 111 to 158 Wh kg-1 with improved cycle stability and rate capability. This work offers a valuable approach to enhance sodium compensation efficiency, promising high-performance energy storage devices in the future.

Selective Lattice Doping Enables a Low-cost, High-capacity and Long-lasting Potassium Layered Oxide Cathode for Potassium and Sodium storage

Layered transition metal oxides are highly promising host materials for K ions, owing to their high theoretical capacities and appropriate operational potentials. To address the intrinsic issues of KxMnO2 cathodes and optimize their electrochemical properties, a novel P3-type oxide doped with carefully chosen cost-effective, electrochemically active and multi-functional elements is proposed, namely K0.57Cu0.1Fe0.1Mn0.8O2. Compared to the pristine K0.56MnO2, its reversible specific is increased from 104 to 135 mAh g-1. In addition, the Cu and Fe co-doping triples the capacity under high current densities, and contributes to long-term stability over 500 cycles with a capacity retention of 68%. Such endeavor holds the potential to make potassium-ion batteries particularly competitive for application in sustainable, low-cost, and large-scale energy storage devices. In addition, the cathode is also extended for sodium storage. Facilitated by the interlayer K ions that protect the layered structure from collapsing and expand the diffusion pathway for sodium ions, the cathode shows a high reversible capacity of 144 mAh g-1, fast kinetics and a long lifespan over 1000 cycles. The findings offer a novel pathway for the development of high-performance and cost-effective sodium-ion batteries.

Microwave-Assisted Hydrothermal Synthesis of Na3V2(PO4)2F3 Nanocuboid@Reduced Graphene Oxide as an Ultrahigh-Rate and Superlong-Lifespan Cathode for Fast-Charging Sodium-Ion Batteries

Na3V2(PO4)2F3 (NVPF) has been regarded as a favorable cathode for sodium-ion batteries (SIBs) due to its high voltage and stable structure. However, the limited electronic conductivity restricts its rate performance. NVPF@reduced graphene oxide (rGO) was synthesized by a facile microwave-assisted hydrothermal approach with subsequent calcination to shorten the hydrothermal time. NVPF nanocuboids with sizes of 50-150 nm distributed on rGO can be obtained, delivering excellent electrochemical performance such as a longevity life (a high capacity retention of 85.6% after 7000 cycles at 10 C) and distinguished rate capability (116 mAh g-1 at 50 C with a short discharging/charging time of 1.2 min). The full battery with a Cu2Se anode represents a capacity of 116 mAh g-1 at 0.2 A g-1. The introduction of rGO can augment the electronic conductivity and advance the Na+ diffusion speed, boosting the cycling and rate capability. Besides, the small lattice change (3.3%) and high structural reversibility during the phase transition process between Na3V2(PO4)2F3 and NaV2(PO4)2F3 testified by in situ X-ray diffraction are also advantageous for Na storage behavior. This work furnishes a simple method to synthesize polyanionic cathodes with ultrahigh rate and ultralong lifespan for fast-charging SIBs.

Regulating the Pore Structure of Activated Carbon by Pitch for High-Performance Sodium-Ion Storage

The pore structure of carbon anodes plays a crucial role in enhancing the sodium storage capacity. Designing more confined pores in carbon anodes is accepted as an effective strategy. However, current design strategies for confined pores in carbon anodes fail to achieve both high capacity and initial Coulombic efficiency (ICE) simultaneously. Herein, we develop a strategy for utilizing the repeated impregnation and precarbonization method of liquid pitch to regulate the pore structure of the activated carbon (AC) material. Driven by capillary coalescence, the pitch is impregnated into the pores of AC, which reduces the specific surface area of the material. During the carbonization process, numerous pores with diameters less than 1 nm are formed, resulting in a high capacity and improved ICE of the carbon anode. Moreover, the ordered carbon layers derived from the liquid pitch also enhance the electrical conductivity, thereby improving the rate capability of as-obtained carbon anodes. This enables the fabricated material (XA-4T-1300) to have a high ICE of 91.1% and a capacity of 383.0 mA h g-1 at 30 mA g-1. The capacity retention is 95.5% after 300 cycles at 1 A g-1. This study proposes a practical approach to adjust the microcrystalline and pore structures to enhance the performance of sodium-ion storage in materials.

Hybrid-Mechanism Synergistic Flexible Nb2O5@WS2@C Carbon Nanofiber Anode for Superior Sodium Storage

Sodium-ion batteries (SIBs) have demonstrated remarkable development potential and commercial prospects. However, in the current state of research, the development of high-energy-density, long-cycle-life, high-rate-performance anode materials for SIBs remains a huge challenge. Free-standing flexible electrodes, owing to their ability to achieve higher energy density without the need for current collectors, binders, and conductive additives, have garnered significant attention across various fields. In this work, we designed and fabricated a free-standing three-dimensional flexible Nb2O5@WS2@C carbon nanofiber (CNF) anode based on a hybrid adsorption-intercalation-conversion mechanism of sodium storage, using electrospinning and hydrothermal synthesis processes. The hybrid structure, aided by synergistic effects, releases the advantages of all materials, demonstrating a superior rate performance (288, 248, 211, 158, 90, and 48 mA h g-1 at the current density of 0.2, 0.5, 1, 2, 5, and 10 A g-1, respectively) and good cycling stability (160 mA h g-1 after 200 cycles at 1 A g-1). This work provides certain guiding significance for future research on hybrid and flexible anodes of SIBs.

Air-Stable Prussian White Cathode Materials for Sodium-Ion Batteries Enabled by ZnO Surface Modification

Iron-based Prussian white (PW) is one of the promising cathodes for sodium-ion batteries, owing to its high capacity and low cost. However, the practical application of PW is hindered by its poor air stability. The metal-oxide coating has been proven to be an effective way to improve the air stability of electrode materials. Whereas, the target electrode materials conventionally need to be dissolved in the aqueous solution to obtain precursor composites and subsequently calcined at a high temperature during the metal-oxide coating process, which could destroy the phase structure of PW as a result of the sodium leaching into the water and thermal decomposition at the high temperature. In this work, we propose a facile method to construct a ZnO surface layer on PW by utilizing ethanol as a solvent and a mild post-treatment temperature. The ZnO coating layer effectively enhances the air stability of PW and induces the formation of the stable interface on PW. The PW-5 wt % ZnO-E (exposed in 60% humidity air after 30 days) cathode demonstrates a much higher capacity retention (94.1%) at 1 C after 200 cycles than that of PW-E (54%). This work lays a solid foundation for further application of PW.

Boosting Multielectron Reaction Stability of Sodium Vanadium Phosphate by High-Entropy Substitution

Na3V2(PO4)3 (NVP) based on the multielectron reactions between V2+ and V5+ has been considered a promising cathode for sodium-ion batteries (SIBs). However, it still suffers from unsatisfactory stability, caused by the poor reversibility of the V5+/V4+ redox couple and structure evolution. Herein, we propos a strategy that combines high-entropy substitution and electrolyte optimization to boost the reversible multielectron reactions of NVP. The high reversibility of the V5+/V4+ redox couple and crystalline structure evolution are disclosed by in situ X-ray absorption near-edge structure spectra and in situ X-ray diffraction. Meanwhile, the electrochemical reaction kinetics of high-entropy substitution NVP (HE-NVP) can be further improved in the diglyme-based electrolyte. These enable HE-NVP to deliver a superior electrochemical performance (capacity retention of 93.1% after 2000 cycles; a large reversible capacity of 120 mAh g-1 even at 5.0 A g-1). Besides, the long cycle life and high power density of the HE-NVP∥natural graphite full-cell configuration demonstrated the superiority of HE-NVP cathode in SIBs. This work highlights that the synergism of high-entropy substitution and electrolyte optimization is a powerful strategy to enhance the sodium-storage performance of polyanionic cathodes for SIBs.

Monolithic Interphase Enables Fast Kinetics for High-Performance Sodium-Ion Batteries at Subzero Temperature

In spite of the competitive performance at room temperature, the development of sodium-ion batteries (SIBs) is still hindered by sluggish electrochemical reaction kinetics and unstable electrode/electrolyte interphase under subzero environments. Herein, a low-concentration electrolyte, consisting of 0.5M NaPF6 dissolving in diethylene glycol dimethyl ether solvent, is proposed for SIBs working at low temperature. Such an electrolyte generates a thin, amorphous, and homogeneous cathode/electrolyte interphase at low temperature. The interphase is monolithic and rich in organic components, reducing the limitation of Na+ migration through inorganic crystals, thereby facilitating the interfacial Na+ dynamics at low temperature. Furthermore, it effectively blocks the unfavorable side reactions between active materials and electrolytes, improving the structural stability. Consequently, Na0.7Li0.03Mg0.03Ni0.27Mn0.6Ti0.07O2//Na and hard carbon//Na cells deliver a high capacity retention of 90.8 % after 900 cycles at 1C, a capacity over 310 mAh g-1 under -30 °C, respectively, showing long-term cycling stability and great rate capability at low temperature.

Copper Sulfide and Graphite Felt Composites as Promising Electrode Materials for Sodium-Ion Batteries

The most prominent and widely used electrical energy storage devices are lithium-ion batteries (LIBs), which in recent years have become costly and deficient. Consequently, new energy storage devices must be introduced into the current market. Sodium-ion batteries (SIBs) are starting to emerge as a promising solution because of sodium's abundance and low cost. To offer these batteries into the current market, their properties must match surpass those of LIB predecessors, necessitating the need for research in this field. In this research work, three methods of graphite felt (GF) and copper sulfide (CuxS) composite preparation using a hydrothermal approach have been explored and compared. The obtained samples exhibited different morphologies and thermal properties when different hydrothermal composite preparation methods were used. The areal charge capacitance values of these samples differed from 8.81 to 13.65 mF/cm2, and the areal discharge capacitance values differed from 10.06 to 13.65 mF/cm2. Notably, these achieved values are higher than those of the CuxS and GF single substances.

High Sodium Ion Storage by Multifunctional Covalent Organic Frameworks for Sustainable Sodium Batteries

Rechargeable sodium batteries hold great promise for circumventing the increasing demand for lithium-ion batteries (LIBs) and the limited supply of lithium. However, efficient sodium ion storage remains a great impediment in this field. In this study, we report the designed synthesis of a multifunctional two-dimensional covalent organic framework featuring hexaazatrinaphthalene cores linked by imidazole moieties and demonstrate its effective performance in sodium ion storage. Benzimidazole-linked covalent organic framework (BCOF-1) was synthesized by a condensation reaction between hexaazatrinaphthalenehexamine (HATNHA) and terephthalaldehyde (TA) and exhibited a high theoretical specific capacity of 392 mA h g-1. BCOF-1 crystallizes, forming eclipsed AA stacking and mesoporous hexagonal one-dimensional channels with high surface area (840 m2 g-1), facilitating fast ionic mobility and charge transfer and enabling high-rate capability at high current rates. BCOF-1 exhibits pseudocapacitive-like behavior with a high specific capacity of 387 mA h g-1, an energy density of 302 W h kg-1 at 0.1 C, and a power density of 682 W kg-1 at 5 C. Our results demonstrate that redox-active COFs have the desired structural and electronic merits to advance the use of organic electrodes in sodium-ion storage toward sustainable and efficient batteries.

Electron Configuration Modulation Induced Stabilized 1T-MoS2 for Enhanced Sodium Ion Storage

1T-MoS2 has become an ideal anode for sodium-ion batteries (SIBs). However, the metastable feature of 1T-MoS2 makes it difficult to directly synthesize under normal conditions. In addition, it easily transforms into 2H phase via restacking, resulting in inferior electrochemical performance. Herein, the electron configuration of Mo 4d orbitals is modulated and the stable 1T-MoS2 is constructed by nickel (Ni) introduction (1T-Ni-MoS2). The original electron configuration of Mo 4d orbitals is changed via the electron injection by Ni, which triggers the phase transition from 2H to 1T phase, thus improving the electrical conductivity and accelerating the redox kinetics of the material. Consequently, 1T-Ni-MoS2 exhibits superior rate capability (266.8 mAh g-1 at 10 A g-1) and excellent cycle life (358.7 mAh g-1 at 1 A g-1 after 350 cycles). In addition, the assembled Na3V2(PO4)3/C||1T-Ni-MoS2 full cells deliver excellent electrochemical properties and show great prospects in energy storage devices.

Novel Solid-State Electrolyte Na3La5Cl18 with High Stability and Fast Ionic Conduction

Motivated by the recent experimental synthesis of a LaCl3-based lithium superionic conductor [Yin, Y.-C. Nature 2023, 616, 77-83], we explore the potential of a LaCl3-based system for a sodium superionic conductor in this work. Using density functional theory combined with molecular dynamics simulation and a grand potential phase diagram analysis, we find that the resulting Na3La5Cl18 exhibits high energetic stability with a small energy-above-hull of 18 meV per atom, a large band gap of 5.58 eV, a wide electrochemical window of 0.41-3.76 V from the cathodic to the anodic limit, and a high Na+ conductivity of 1.3 mS/cm at 300 K. Furthermore, Na3La5Cl18 shows high chemical interface stability with the reported high-potential cathode materials such as NaCoO2, NaCrO2, Na2FePO4F, Na3V2(PO4)3, and Na3V2(PO4)2F3. These findings clearly suggest that the LaCl3-based framework can be used as a building block not only for Li-ion but also for Na-ion batteries.

Sb-Doped Biphasic P2/O3-Type Mn-Rich Layered Oxide Cathode Material for High-Performance Sodium-Ion Batteries

Mn-rich P2-type layered oxide cathode materials suffer from severe capacity loss caused by detrimental phase transition and transition metal dissolution, making their implementation difficult in large-scale sodium-ion battery applications. Herein, we introduced a high-valent Sb5+ substitution, leading to a biphasic P2/O3 cathode that suppresses the P2-O2 phase transformation in the high-voltage condition attributed to the stronger Sb-O covalency that introduces extra electrons to the O atom, reducing oxygen loss from the lattices and improving structural stability, as confirmed by first-principle calculations. Besides, the enhanced Na+ diffusion kinetics and thermodynamics in the modified sample are associated with the enlarged lattice parameters. As a result, the proposed cathode delivers a discharge capacity of 142.6 mAh g-1 at 0.1C between 1.5 and 4.3 V and excellent performance at a high mass loading of 8 mg cm3 with a specific capacity of 131 mAh g-1 at 0.2C. Furthermore, it also possesses remarkable rate capability (90.3 mAh g-1 at 5C), specifying its practicality in high-energy-density sodium-ion batteries. Hence, this work provides insights into incorporating high-valent dopants for high-performance Mn-rich cathodes.

Titania/graphene nanocomposites from scalable gas-phase synthesis for high-capacity and high-stability sodium-ion battery anodes

In sodium-ion batteries (SIBs), TiO2or sodium titanates are discussed as cost-effective anode material. The use of ultrafine TiO2particles overcomes the effect of intrinsically low electronic and ionic conductivity that otherwise limits the electrochemical performance and thus its Na-ion storage capacity. Especially, TiO2nanoparticles integrated in a highly conductive, large surface-area, and stable graphene matrix can achieve an exceptional electrochemical rate performance, durability, and increase in capacity. We report the direct and scalable gas-phase synthesis of TiO2and graphene and their subsequent self-assembly to produce TiO2/graphene nanocomposites (TiO2/Gr). Transmission electron microscopy shows that the TiO2nanoparticles are uniformly distributed on the surface of the graphene nanosheets. TiO2/Gr nanocomposites with graphene loadings of 20 and 30 wt% were tested as anode in SIBs. With the outstanding electronic conductivity enhancement and a synergistic Na-ion storage effect at the interface of TiO2nanoparticles and graphene, nanocomposites with 30 wt% graphene exhibited particularly good electrochemical performance with a reversible capacity of 281 mAh g-1at 0.1 C, compared to pristine TiO2nanoparticles (155 mAh g-1). Moreover, the composite showed excellent high-rate performance of 158 mAh g-1at 20 C and a reversible capacity of 154 mAh g-1after 500 cycles at 10 C. Cyclic voltammetry showed that the Na-ion storage is dominated by surface and TiO2/Gr interface processes rather than slow, diffusion-controlled intercalation, explaining its outstanding rate performance. The synthesis route of these high-performing nanocomposites provides a highly promising strategy for the scalable production of advanced nanomaterials for SIBs.

Tuning the Electrolyte and Interphasial Chemistry for All-Climate Sodium-ion Batteries

Sodium-ion batteries (SIBs) present a promising avenue for next-generation grid-scale energy storage. However, realizing all-climate SIBs operating across a wide temperature range remains a challenge due to the poor electrolyte conductivity and instable electrode interphases at extreme temperatures. Here, we propose a comprehensively balanced electrolyte by pairing carbonates with a low-freezing-point and low-polarity ethyl propionate solvent which enhances ion diffusion and Na+-desolvation kinetics at sub-zero temperatures. Furthermore, the electrolyte leverages a combinatorial borate- and nitrile-based additive strategy to facilitate uniform and inorganic-rich electrode interphases, ensuring excellent rate performance and cycle stability over a wide temperature range from -45 °C to 60 °C. Notably, the Na||sodium vanadyl phosphate cell delivers a remarkable capacity of 105 mAh g-1 with a high rate of 2 C at -25 °C. In addition, the cells exhibit excellent cycling stability over a wide temperature range, maintaining a high capacity retention of 84.7 % over 3,000 cycles at 60 °C and of 95.1 % at -25 °C over 500 cycles. The full cell also exhibits impressive cycling performance over a wide temperature range. This study highlights the critical role of electrolyte and interphase engineering for enabling SIBs that function optimally under diverse and extreme climatic environments.

A High-Voltage Cathode Material with Ultralong Cycle Performance for Sodium-Ion Batteries

Vanadium-based polyanionic materials are promising electrode materials for sodium-ion batteries (SIBs) due to their outstanding advantages such as high voltage, acceptable specific capacity, excellent structural reversibility, good thermal stability, etc. Polyanionic compounds, moreover, can exhibit excellent multiplicity performance as well as good cycling stability after well-designed carbon covering and bulk-phase doping and thus have attracted the attention of multiple researchers in recent years. In this paper, after the modification of carbon capping and bulk-phase nitrogen doping, compared to pristine Na3 V2 (PO4 )3 , the well optimized Na3 V(PO3 )3 N/C possesses improved electromagnetic induction strength and structural stability, therefore exhibits exceptional cycling capability of 96.11% after 500 cycles at 2 C (1 C = 80 mA g-1 ) with an elevated voltage platform of 4 V (vs Na+ /Na). Meanwhile, the designed Na3 V(PO3 )3 N/C possesses an exceptionally low volume change of ≈0.12% during cycling, demonstrating its quasi-zero strain property, ensuring an impressive capacity retention of 70.26% after 10,000 cycles at 2 C. This work provides a facial and cost-effective synthesis method to obtain stable vanadium-based phosphate materials and highlights the enhanced electrochemical properties through the strategy of carbon rapping and bulk-phase nitrogen doping.

BF4- Tailoring Solvation Chemistry of Ether-Based Electrolytes to Construct Stable Electrode/Electrolyte Interfaces for Sodium-Ion Full Batteries

The ether-based electrolytes show excellent performance on anodes in sodium-ion batteries (SIBs), but they still show poor compatibility with the cathodes. Here, ether electrolytes with NaBF4 as the main salt or additive were applied in NFM//HC full cells and showed enhanced performance than the electrolyte with NaPF6. Then, BF4- was found to have a stronger interaction with Na+, which could reduce the solvation of Na+ with the solvent, thus inducing the formation of the cathode electrolyte interface (CEI) and solid electrolyte interface (SEI) layers rich in inorganic species. Moreover, the morphology, structure, composition, and solubility of CEI and SEI were explored, concluding that NaBF4 could induce more stable CEI and SEI layers rich in B-containing species and inorganics. This work proposes using NaBF4 as the main salt or additive to improve the performance of ether electrolytes in NFM//HC full cells, which provides a strategy to improve the compatibility of ether-based electrolytes and cathodes.

P2/O3 Biphasic Cathode Material through Magnesium Substitution for Sodium-Ion Batteries

P2-type Fe-Mn-based oxides offer excellent discharge specific capacity and are as affordable as typical layered oxide cathode materials for sodium-ion batteries (SIBs). After Cu modification, though they can improve the cycling performance and air stability, the discharge specific capacity will be reduced. Considering the complementary nature of biphasic phases in electrochemistry, hybridizing P2/O3 hybrid phases can enhance both the storage performance of the battery and specific capacity. Herein, a hybrid phase composite with high capacity and good cycle performance is deliberately designed and successfully prepared by controlling the amount of Mg doping in the layered oxide. It has been found that the introduction of Mg can activate anion redox in the oxide layer, resulting in a significant increase in the specific discharge capacity of the material. Meanwhile, the dual-phase structure can produce an interlocking effect, thus effectively alleviating structure strain. The degradation of cycling performance caused by structural damage during the high-voltage charging and discharging process is clearly mitigated. The results show that the specific discharge capacity of Na0.67Cu0.2Mg0.1Fe0.2Mn0.5O2 is as high as 212.0 mAh g-1 at 0.1C rate and 186.2 mAh g-1 at 0.2C rate. After 80 cycles, the capacity can still maintain 88.1%. Moreover, the capacity and cycle performance as well as the stability can still remain stable even in the high-voltage window. Therefore, this work offers an insightful exploration for the development of composite cathode materials for SIBs.

Interfacial-Confined Isochronous Conversion to Biphasic Selenide Heterostructure with Enhanced Adsorption Behaviors for Robust High-Rate Na-Ion Storage

Sodium-ion batteries (SIBs) have gradually become one of the most promising energy storage techniques in the current era of post-lithium-ion batteries. For anodes, transitional metal selenides (TMSe) based materials are welcomed choices , owing to relatively higher specific capacities and enriched redox active sites. Nevertheless, current bottlenecks are blamed for their poor intrinsic electronic conductivities, and uncontrollable volume expansion during redox reactions. Given that, an interfacial-confined isochronous conversion strategy is proposed, to prepare orthorhombic/cubic biphasic TMSe heterostructure, namely CuSe/Cu3 VSe4 , through using MXene as the precursor, followed by Cu/Se dual anchorage. As-designed biphasic TMSe heterostructure endows unique hierarchical structure, which contains adequate insertion sites and diffusion spacing for Na ions, besides, the surficial pseudocapacitive storage behaviors can be also proceeded like 2D MXene. By further investigation on electronic structure, the theoretical calculations indicate that biphasic CuSe/Cu3 VSe4 anode exhibits well-enhanced properties, with smaller bandgap and thus greatly improves intrinsic poor conductivities. In addition, the dual redox centers can enhance the electrochemical Na ions storage abilities. As a result, the as-designed biphasic TMSe anode can deliver a reversible specific capacity of 576.8 mAh g-1 at 0.1 A g-1 , favorable Na affinity, and reduced diffusion barriers. This work discloses a synchronous solution toward demerits in conductivities and lifespan, which is inspiring for TMSe-based anode development in SIBs systems.

Regulating Anionic Redox via Mg Substitution in Mn-Rich Layered Oxide Cathodes Enabling High Electrochemical Stability for Sodium-Ion Batteries

With the limited resources and high cost of lithium-ion batteries (LIBs) and the ever-increasing market demands, sodium-ion batteries (SIBs) gain much interest due to their economical sustainability, and similar chemistry and manufacturing processes to LIBs. As cathodes play a vital role in determining the energy density of SIBs, Mn-based layered oxides are promising cathodes due to their low cost, environmental friendliness, and high theoretical capacity. However, the main challenge is structural instability upon cycling at high voltage. Herein, Mg is introduced into the P2-type Na0.62 Ni0.25 Mn0.75 O2 cathode to enhance electrochemical stability. By combining electrochemical testing and material characterizations, it is found that substituting 10 mol% Mg can effectively alleviate the P2-O2 phase transition, Jahn-Teller distortion, and irreversible oxygen redox. Moreover, structural integrity is greatly improved. These lead to enhanced electrochemical performances. With the optimized sample, a remarkable capacity retention of 92% in the half cell after 100 cycles and 95% in the full cell after 170 cycles can be achieved. Altogether, this work provides an alternative way to stabilize P2-type Mn-based layer oxide cathodes, which in turn, put forward the development of this material for the next-generation SIBs.

Novel NASICON-Type Na-V-Mn-Ni-Containing Cathodes for High-Rate and Long-Life SIBs

Partial substitution of V by other transition metals in Na3 V2 (PO4 )3 (NVP) can improve the electrochemical performance of NVP as a cathode for sodium-ion batteries (SIBs). Herein, phosphate Na-V-Mn-Ni-containing composites based on NASICON (Natrium Super Ionic Conductor)-type structure have been fabricated by sol-gel method. The synchrotron-based X-ray study, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) studies show that manganese/nickel combinations successfully substitute the vanadium in its site within certain limits. Among the received samples, composite based on Na3.83 V1.17 Mn0.58 Ni0.25 (PO4 )3 (VMN-0.5, 108.1 mAh g-1 at 0.2 C) shows the highest electrochemical ability. The cyclic voltammetry, galvanostatic intermittent titration technique, in situ XRD, ex situ XPS, and bond valence site energy calculations exhibit the kinetic properties and the sodium storage mechanism of VMN-0.5. Moreover, VMN-0.5 electrode also exhibits excellent electrochemical performance in quasi-solid-state sodium metal batteries with PVDF-HFP quasi-solid electrolyte membranes. The presented work analyzes the advantages of VMN-0.5 and the nature of the substituted metal in relation to the electrochemical properties of the NASICON-type structure, which will facilitate further commercialization of SIBs.

Flexible Self-Supporting MOF-Based Bean Pod Cube Hollow Nanofibers for Ultralong Cycling and High Rate Na Storage

Sodium-ion batteries (SIBs) have garnered significant attention due to their potential as an emerging energy storage solution. Tin sulfide (SnS) has emerged as a promising anode material for SIBs due to its impressive theoretical specific capacity of 1022 mA h g-1 and excellent electrical conductivity. However, its practical application has been hindered by issues such as large volume expansion, which adversely affects cycling stability and rate performance during the charge/discharge processes. In this study, a novel approach to address these issues by synthesizing the bean pod cube hollow metal-organic framework (MOF)-SnSx/NC@N-doped carbon nanofibers through a process involving electrospinning, PDA coating, and calcination. The Sn-MOF serves as a self-sacrificing template, facilitating the simultaneous dissociation of MOF and polymerization of dopamine, leading to the creation of hollow intermediates that retain tin components. Subsequent sulfidation results in the integration of the hollow MOF-SnSx/NC nanoparticles within 3D nitrogen-doped carbon nanofibers, forming the distinctive bean pod cube composite structure. This unique configuration effectively shortens the diffusion path and mitigates volume expansion for sodium ions, ultimately yielding an exceptional high rate performance of 130 mA h g-1 (10 A g-1) and an ultralong cycling performance of 328 mA h g-1 even after 3500 cycles (2 A g-1) as the anode for SIBs.

Optimizing Electron Spin-Polarized States of MoSe2 /Cr2 Se3 Heterojunction-Embedded Carbon Nanospheres for Superior Sodium/Potassium-Ion Battery Performances

The principal challenges faced by sodium-ion batteries (SIBs) and potassium-ion batteries (KIBs) revolve around identifying suitable host materials capable of accommodating metal ions with larger dimensions and addressing the issue of sluggish chemical kinetics. Herein, a MoSe2 /Cr2 Se3 heterojunction uniformly embedded is fabricated in nitrogen-doped hollow carbon nanospheres (MoSe2 /Cr2 Se3 @N-HCSs) as an electrode material for SIBs and KIBs. Cr2 Se3 exhibits spontaneous antiparallel alignment of magnetic moments. Mo2+ doping is employed to regulate the electron spin states of Cr2 Se3 . Moreover, the MoSe2 and Cr2 Se3 heterojunctions induce a lattice mismatch at the heterostructure interface, resulting in spin-polarized states or localized magnetic moments at the interface, potentially contributing to spin-polarized surface capacitance. MoSe2 /Cr2 Se3 @N-HCSs demonstrate a high capacity of 498 mAh g-1 at 0.1 A g-1 with good cycling stability (capacity of 405 mAh g-1 and a coulombic efficiency of 99.8% after 1000 cycles). Additionally, density functional theory (DFT) calculations simulate the accumulation of spin-polarized charges at the MoSe2 /Cr2 Se3 @N-HCSs heterojunction interface, dependent on the surface electron density of the antiferromagnetic Cr2 Se3 and the surface spin polarization near the Fermi level. After regulating the electron spin states through Mo-doping, the band gap of the material decreases. These significant findings provide novel insights into the design and synthesis of electrode materials with exceptional performance characteristics for batteries.

Low-Temperature and Fast-Charge Sodium Metal Batteries

Low-temperature operation of sodium metal batteries (SMBs) at the high rate faces challenges of unstable solid electrolyte interphase (SEI), Na dendrite growth, and sluggish Na+ transfer kinetics, causing a largely capacity curtailment. Herein, low-temperature and fast-charge SMBs are successfully constructed by synergetic design of the electrolyte and electrode. The optimized weak-solvation dual-salt electrolyte enables high Na plating/stripping reversibility and the formation of NaF-rich SEI layer to stabilize sodium metal. Moreover, an integrated copper sulfide electrode is in situ fabricated by directly chemical sulfuration of copper current collector with micro-sized sulfur particles, which significantly improves the electronic conductivity and Na+ diffusion, knocking down the kinetic barriers. Consequently, this SMB achieves the reversible capacity of 202.8 mAh g-1 at -20 °C and 1 C (1 C = 558 mA g-1 ). Even at -40 °C, a high capacity of 230.0 mAh g-1 can still be delivered at 0.2 C. This study is encouraging for further exploration of cryogenic alkali metal batteries, and enriches the electrode material for low-temperature energy storage.

Homeostatic Solid Solution Reaction in Phosphate Cathode: Breaking High-Voltage Barrier to Achieve High Energy Density and Long Life of Sodium-Ion Batteries

The stable phase transformation during electrochemical progress drives extensive research on vanadium-based polyanions in sodium-ion batteries (SIBs), especially Na3 V2 (PO4 )3 (NVP). And the electron transfer between V3+/4+ redox couple in NVP could be generally achieved, owing to the confined crystal variation during battery service. However, the more favorable V4+/5+ redox couple is still in hard-to-access situation due to the high barrier and further brings about the corresponding inefficiency in energy densities. In this work, the multilevel redox in NVP frame (MLNP) alters reaction pathway to undergo homeostatic solid solution process and breaks the high barrier of V4+/5+ at high voltage, taking by progressive transition metal (V, Fe, Ti, and Cr) redox couple. The diversified reaction paths across diffusion barriers could be realized by distinctive release/uptake of inactive Na1 site, confirmed by the calculations of density functional theory. Thereby its volume change is merely 1.73% during the multielectron-transfer process (≈2.77 electrons). MLNP cathode could achieve an impressive energy density of 440 Wh kg-1 , driving the leading development of MLNP among other NASICON structure SIBs. The integration of multiple redox couples with low strain modulates the reaction pathway effectively and will open a new avenue for fabricating high-performance cathodes in SIBs.

Non-aqueous Liquid Electrolyte Additives for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have been recognized as one of the most promising new energy storage devices for their rich sodium resources, low cost and high safety. The electrolyte, as a bridge connecting the cathode and anode electrodes, plays a vital role in determining the performance of SIBs, such as coulombic efficiency, energy density and cycle life. Therefore, the overall performance of SIBs could be significantly improved by adjusting the electrolyte composition or adding a small number of functional additives. In this review, the fundamentals of SIB electrolytes including electrode-electrolyte interface and solvation structure are introduced. Then, the mechanisms of electrolyte additive action on SIBs are discussed, with a focus on film-forming additives, flame-retardant additives and overcharge protection additives. Finally, the future research of electrolytes is prospected from the perspective of scientific concepts and practical applications.

Trace Y Doping Regulated Bulk/Interfacial Reactions of P2-Layered Oxides for Ultrahigh-Rate Sodium-Ion Batteries

P2-phase layered cathodes play a pivotal role in sodium-ion batteries due to their efficient Na+ intercalation chemistry. However, limited by crystal disintegration and interfacial instability, bulk and interfacial failure plague their electrochemical performance. To address these challenges, a structural enhancement combined with surface modification is achieved through trace Y doping. Based on a synergistic combination of experimental results and density functional theory (DFT) calculations, the introduction of partial Y ions at the Na site (2d) acts as a stabilizing pillar, mitigating the electrostatic repulsions between adjacent TMO2 slabs and thereby relieving internal structural stress. Furthermore, the presence of Y effectively optimizes the Ni 3d-O 2p hybridization, resulting in enhanced electronic conductivity and a notable rapid charging ability, with a capacity of 77.3 mA h g-1 at 40 C. Concurrently, the introduction of Y also induces the formation of perovskite nano-islands, which serve to minimize side reactions and modulate interfacial diffusion. As a result, the refined P2-Na0.65 Y0.025 [Ni0.33 Mn0.67 ]O2 cathode material exhibits an exceptionally low volume variation (≈1.99%), an impressive capacity retention of 83.3% even at -40 °C after1500 cycles at 1 C.

Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries

Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.

Synthesis of Sustainable Lignin Precursors for Hierarchical Porous Carbons and Their Efficient Performance in Energy Storage Applications

Lignin-derived porous carbons have great potential for energy storage applications. However, their traditional synthesis requires highly corrosive activating agents in order to produce porous structures. In this work, an environmentally friendly and unique method has been developed for preparing lignin-based 3D spherical porous carbons (LSPCs). Dropwise injection of a lignin solution containing PVA sacrificial templates into liquid nitrogen produces tiny spheres that are lyophilized and carbonized to produce LSPCs. Most of the synthesized samples possess excellent specific surface areas (426.6-790.5 m2/g) along with hierarchical micro- and mesoporous morphologies. When tested in supercapacitor applications, LSPC-28 demonstrates a superior specific capacitance of 102.3 F/g at 0.5 A/g, excellent rate capability with 70.3% capacitance retention at 20 A/g, and a commendable energy density of 2.1 Wh/kg at 250 W/kg. These materials (LSPC-46) also show promising performance as an anode material in sodium-ion batteries with high reversible capacity (110 mAh g-1 at 100 mA g-1), high Coulombic efficiency, and excellent cycling stability. This novel and green technique is anticipated to facilitate the scalability of lignin-based porous carbons and open a range of research opportunities for energy storage applications.

N-Containing Na2 VTi(PO4 )3 /C for Aqueous Sodium-Ion Batteries

Phosphates featuring a 3D framework offer a promising alternative to aqueous sodium-ion batteries, known for their safety, cost-effectiveness, scalability, high power density, and tolerance to mishandling. Nevertheless, they often suffer from poor reversible capacity stemming from limited redox couples. Herein, N-containing Na2 VTi(PO4 )3 is synthesized for aqueous sodium-ion storage through multi-electron redox reactions. It demonstrates a capacity of 155.2 mAh g-1 at 1 A g-1 (≈ 5.3 C) and delivers an ultrahigh specific energy of 55.9 Wh kg-1 in a symmetric aqueous sodium-ion battery. The results from in situ X-ray diffraction analysis, ex situ X-ray photoelectron spectroscopy analysis, and first-principle calculations provide insights into the local chemical environment of sodium ions, the mechanisms underlying capacity decay during cycling, and the dynamics of ion and electron transfer at various states of charge. This understanding will contribute to the advancement of electrode materials for aqueous sodium-ion batteries.

Enhancing Sodium-Ion Transport by Hollow Nanotube Structure Design of a V5S8@C Anode for Sodium-Ion Batteries

V5S8 has received extensive attention in the field of sodium-ion batteries (SIBs) due to its two-dimensional (2D) layered structure, and weak van der Waals forces between V-S accelerate the transport of sodium ions. However, the long-term cycling of V5S8 still suffers from volume expansion and low conductivity. Herein, a hollow nanotube V5S8@C (H-V5S8@C) with improved conductivity was synthesized by a solvothermal method to alleviate cracking caused by volume expansion. Benefiting from the large specific surface area of the hollow nanotube structure and uniform carbon coating, H-V5S8@C exhibits a more active site and enhanced conductivity. Meanwhile, the heterojunction formed by a few residual MoS2 and the outer layer of V5S8 stabilizes the structure and reduces the ion migration barrier with fast Na+ transport. Specifically, the H-V5S8@C anode provides an enhanced rate performance of 270.1 mAh g-1 at 15 A g-1 and high cycling stability of 291.7 mAh g-1 with a retention rate of 90.98% after 300 cycles at 5 A g-1. This work provides a feasible approach for the structural design of 2D layered materials, which can promote the practical application of fast-charging sodium-ion batteries.

Sustainable Anionic Redox by Inhibiting Li Cross-Layer Migration in Na-Based Layered Oxide Cathodes

The irrational utilization of an anionic electron often accompanies structural degradation with an irreversible cation migration process upon cycling in sodium-layered oxide cathodes. Moreover, the insufficient understanding of the anionic redox involved cation migration makes the design strategies of high energy density electrodes even less effective. Herein, a P3-Na0.67Li0.2Fe0.2Mn0.6O2 (P3-NLFM) cathode is proposed with the in-plane disordered Li distribution after an in-depth remolding of the Li ribbon-ordered P3-Na0.6Li0.2Mn0.8O2 (P3-NLM) layered oxide. The disordered Li sublattice in the transition metal slab of P3-NLFM leads to the dispersed |O2p orbitals, the lowered charge transfer gap, and the suppressed phase transition at high voltages. Then the enhanced Mn-O interaction and electronic stability are disclosed by the crystal orbital Hamilton population (COHP) analysis at high voltage in P3-NLFM. Furthermore, ab initio molecular dynamics (AIMD) simulation suggests the order/disorder of the transition metal layer is highly correlated with the stability of the Li sublattice. The cross-layer migration and loss of Li in P3-NLM are suppressed in P3-NLFM to enable the high reversibility upon cycling. As a result, the P3-NLFM delivers a high capacity of 163 mAh g-1 without oxygen release and an enhanced capacity retention of 81.9% (vs 42.9% in P3-NLM) after 200 cycles, which constitutes a promising approach for sustainable oxygen redox in rechargeable batteries.

NASICON-Type Na3V1.5Cr0.4Fe0.1(PO4)3: High-Voltage and High-Rate Cathode Materials for Sodium-Ion Batteries

Cationic alteration related to a sodium super ion conductor (NASICON)-structured Na3V2(PO4)3 (NVP) is an effective strategy for formulating high-energy and stable cathodes for sodium-ion batteries (SIBs). In this study, we altered the structure of NVP with dual cations, namely, Cr and Fe, to develop Na3V1.5Cr0.4Fe0.1(PO4)3 cathodes for SIBs with high-rate capability (∼71 mAh g-1 at 100 C) and an extreme cycle life output (∼75 mAh g-1 with 95% capacity retention for 10,000 cycles). These excellent electrochemical properties can be ascribed to the synergistic effects of Cr and Fe in the NVP structure, as verified experimentally and theoretically. Therefore, the proposed cosubstitution method can enhance the performance of SIBs by improving their structural stability, electronic conductivity, and phase-change behavior.

Na2.5 Cr0.5 Zr0.5 Cl6 : A New Halide-Based Fast Sodium-Ion Conductor

All-solid-state batteries employing solid electrolytes (SEs) have received widespread attention due to their high safety. Recently, lithium halides are intensively investigated as promising SEs while their sodium counterparts are less studied. Herein, a new sodium-ion conductor with a chemical formula of Na2.5 Cr0.5 Zr0.5 Cl6 is reported, which exhibits high room temperature ionic conductivity of 0.1 mS cm-1 with low migration energy barrier of ≈0.41 eV. Na2.5 Cr0.5 Zr0.5 Cl6 has a Fm-3m structure with 41.67 mol.% of cationic vacancies owing to the occupation of Cr (8.33 mol.%) and Zr (8.33 mol.%) ions at Na sites. Supercell calculations show that the lowest columbic energy configuration has Cr/Zr/V (where V is the vacancy) clusters in the structure. Nonetheless, the clusters have mixed effects on the sodium ion conduction pathway, based on the Bond Valence Energy Landscape calculation. A global 3D Na-ion transport percolation network can be revealed in the lowest energy supercell. Effective pathways are connected through the NaCl6 and VCl6 nodes. Besides, Raman spectroscopy and 23 Na solid-state nuclear magnetic resonance spectroscopy further prove the tunable structure of the SEs with different Cr to Zr ratios. The optimization between the concentration of Na+ and vacancies is crucial to create an improved network of Na+ diffusion channels.

Honeycomb-Structured MoSe2 /rGO Composites as High-Performance Anode Materials for Sodium-Ion Batteries

Sodium-ion batteries are a promising substitute for lithium batteries due to the abundant resources and low cost of sodium. Herein, honeycomb-shaped MoSe2 /reduced graphene oxide (rGO) composite materials are synthesized from graphene oxide (GO) and MoSe2 through a one-step solvothermal process. Experiments show that the 3D honeycomb structure provides excellent electrolyte penetration while alleviating the volume change during electrochemical cycling. An anode prepared with MoSe2 /rGO composites exhibits significantly improved sodium-ion storage properties, where a large reversible capacity of 215 mAh g-1 is obtained after 2700 cycles at the current density of 30.0 A g-1 or after 5900 cycles at 8.0 A g-1 . When such an anode is paired with Na3 V2 (PO4 )3 to form a full cell, a reversible specific capacity of 107.5 mAh g-1 can be retained after 1000 cycles at the current of 1.0 A g-1 . Transmission electron microscopy, X-ray photoelectron spectroscopy and in situ X-ray diffraction (XRD) characterization reveal the reversible storage reaction of Na ions in the MoSe2 /rGO composites. The significantly enhanced sodium storage capacity is attributed to the unique honeycomb microstructure and the use of ether-based electrolytes. This study illustrates that combining rGO with ether-based electrolytes has tremendous potential in constructing high-performance sodium-ion batteries.

Spherical Shell with CNTs Network Structuring Fe-Based Alluaudite Na2+2 δ Fe2- δ (SO4 )3 Cathode and Novel Phase Transition Mechanism for Sodium-Ion Battery

Iron-based sulfate cathodes of alluaudite Na2+2 δ Fe2- δ (SO4 )3 (NFS) in sodium-ion batteries with low cost, steady cycling performance, and high voltage are promising for grid-scale energy storage systems. However, the poor electronic conductivity and the limited understanding of the phase-evolution of precursors hinder obtaining high-rate capacity and the pure phase. Distinctive NFS@C@n%CNTs (n = 1, 2, 5, 10) sphere-shell conductive networks composite cathode materials are constructed creatively, which exhibit superior reversible capacity and rate performance. In detail, the designed NFS@C@2%CNTs cathode delivers an initial discharge capacity of 95.9 mAh g-1 at 0.05 C and up to 60 mAh g-1 at a high rate of 10 C. The full NFS@C@2%CNTs//HC cell delivers a practical operating voltage of 3.5 V and mass-energy density of 140 Wh kg-1 at 0.1 C, and it can also retain 67.37 mAh g-1 with a capacity retention rate of 96.4% after 200 cycles at 2 C. On the other hand, a novel combination reaction mechanism is first revealed for forming NFS from the mixtures of Na2 Fe(SO4 )2 ·nH2 O (n = 2, 4) and FeSO4 ·H2 O during the sintering process. The inspiring results would provide a novel perspective to synthesize high-performance alluaudite sulfate and analogs by aqueous methods.

Spin-Polarized Surface Capacitance Effects Enable Fe3 O4 Anode Superior Wide Operation-Temperature Sodium Storage

Fe3 O4 is widely investigated as an anode for ambient sodium-ion batteries (SIBs), but its electrochemical properties in the wide operation-temperature range have rarely been studied. Herein, the Fe3 O4 nanoparticles, which are well encapsulated by carbon nanolayers, are uniformly dispersed on the graphene basal plane (named Fe3 O4 /C@G) to be used as the anode for SIBs. The existence of graphene can reduce the size of Fe3 O4 /C nanoparticles from 150 to 80 nm and greatly boost charge transport capability of electrode, resulting in an obvious size decrease of superparamagnetic Fe nanoparticles generated from the conversion reaction from 5 to 2 nm. Importantly, the ultra-small superparamagnetic Fe nanoparticles (≈2 nm) can induce a strong spin-polarized surface capacitance effect at operating temperatures ranging from -40 to 60 °C, thus achieving highly efficient Na-ion transport and storage in a wide operation-temperature range. Consequently, the Fe3 O4 /C@G anode shows high capacity, excellent fast-charging capability, and cycling stability ranging from -40 to 60 °C in half/full cells. This work demonstrates the viability of Fe3 O4 as anode for wide operation-temperature SIBs and reveals that spin-polarized surface capacitance effects can promote Na-ion storage over a wide operation temperature range.

Multilevel Gradient-Ordered Silicon Anode with Unprecedented Sodium Storage

While cost-effective sodium-ion batteries (SIBs) with crystalline silicon anodes promise high theoretical capacities, they perform poorly because silicon stores sodium ineffectively (capacity <40 mAh g-1 ). To address this issue, herein an atomic-order structural-design tactic is adopted for obtaining unique multilevel gradient-ordered silicon (MGO-Si) by simple electrochemical reconstruction. In situ-formed short-range-, medium-range-, and long-range-ordered structures construct a stable MGO-Si, which contributes to favorable Na-Si interaction and fast ion diffusion channels. These characteristics afford a high reversible capacity (352.7 mAh g-1 at 50 mA g-1 ) and stable cycling performance (95.2% capacity retention after 4000 cycles), exhibiting record values among those reported for pure silicon electrodes. Sodium storage of MGO-Si involves an adsorption-intercalation mechanism, and a stepwise construction strategy of gradient-ordered structure further improves the specific capacity (339.5 mAh g-1 at 100 mA g-1 ). Reconstructed Si/C composites show a high reversible capacity of 449.5 mAh g-1 , significantly better than most carbonaceous anodes. The universality of this design principle is demonstrated for other inert or low-capacity materials (micro-Si, SiO2 , SiC, graphite, and TiO2 ), boosting their capacities by 1.5-6 times that of pristine materials, thereby providing new solutions to facilitate sodium storage capability for better-performing battery designs.