Dual elemental doping activated signaling pathway of angiogenesis and defective heterojunction engineering for effective therapy of MRSA-infected wounds

Multi-drug resistant bacterial infections pose a significant threat to human health. Thus, the development of effective bactericidal strategies is a pressing concern. In this study, a ternary heterostructure (Zn-CN/P-GO/BiS) comprised of Zn-doped graphite phase carbon nitride (g-C3N4), phosphorous-doped graphene oxide (GO) and bismuth sulphide (Bi2S3) is constructed for efficiently treating methicillin-resistant Staphylococcus aureus (MRSA)-infected wound. Zn doping-induced defect sites in g-C3N4 results in a reduced band gap (ΔE) and a smaller energy gap (ΔEST) between the singlet state S1 and triplet state T1, which favours two-photon excitation and accelerates electron transfer. Furthermore, the formation of an internal electric field at the ternary heterogeneous interface optimizes the charge transfer pathway, inhibits the recombination of electron-hole pairs, improves the photodynamic effect of g-C3N4, and enhances its catalytic performance. Therefore, the Zn-CN/P-GO/BiS significantly augments the production of reactive oxygen species and heat under 808 nm NIR (0.67 W cm-2) irradiation, leading to the elimination of 99.60% ± 0.07% MRSA within 20 min. Additionally, the release of essential trace elements (Zn and P) promotes wound healing by activating hypoxia-inducible factor-1 (HIF-1) and peroxisome proliferator-activated receptors (PPAR) signaling pathways. This work provides unique insight into the rapid antibacterial applications of trace element doping and two-photon excitation.

Co single atom coupled oxygen vacancy on W18O49 nanowires surface to construct asymmetric active site enhanced peroxymonosulfate activation

Enhancing the activation of peroxymonosulfate (PMS) is essential for generating more reactive oxygen species in advanced oxidation process (AOPs). Nevertheless, improving PMS adsorption and expediting interfacial electron transfer to enhance reaction kinetics pose significant challenges. Herein, we construct confined W18O49 nanowires with asymmetric active centers containing Co-Vo-W (Vo: oxygen vacancy). The design incorporates surface-rich Vo and single-atom Co, and the resulting material is employed for PMS activation in water purification. By coupling unsaturated coordinated electrons in Vo with low-valence Co single atoms to construct an the "electron fountainhead", the adsorption and activation of PMS are enhanced. This results in the generation of more active free radicals (SO4•-, •OH, •O2-) and non-free radicals (1O2) for the decomposition of micropollutants. Thereinto, the degradation rate of bisphenol A (BPA) by Co-W18O49 is 32.6 times faster that of W18O49 monomer, which is also much higher than those of other transition-metal-doped W18O49 composites. This work is expected to help to elucidate the rational design and efficient PMS activation of catalysts with asymmetric active centers.

Ultrasound-driven radical chain reaction and immunoregulation of piezoelectric-based hybrid coating for treating implant infection

The poor efficiency of US-responsive coatings on implants restricts their practical application. Immunotherapy that stimulates immune cells to enhance their antibacterial activity is expected to synergize with sonodynamic therapy for treating implant infection effectively and safely. Herein, US-responsive hybrid coatings composed of the oxygen-deficient BaTiO3 nanorod arrays and l-arginine (BaTiO3-x/LA) are designed and prepared on titanium implants for sonocatalytic therapy-cooperated immunotherapy to treat Methicillin-resistant Staphylococcus aureus (MRSA) infection. BaTiO3-x/LA can generate more oxidizing reactive oxygen species (ROS, hydroxyl radical (·OH)) and reactive nitrogen species (RNS, peroxynitrite anion (ONOO-)). The construction of nanorod arrays and oxygen defects balances the piezoelectric properties and sonocatalytic capability during US treatment. The generated piezoelectric electric field provides a sufficient driving force to separate electrons and holes, and the oxygen defects attenuate the electron-hole recombination efficiency, consequently increasing the yield of ROS during the US treatment. Moreover, nitric oxide (NO) released by l-arginine reacts with the superoxide radical (·O2-) to produce ONOO-. Since, this radical chain reaction improves the oxidizing ability between bacteria and radicals, the cell membrane (argB, secA2) and DNA (dnaBGXN) are destroyed. The bacterial self-repair mechanism indirectly accelerates bacterial death based on the transcriptome analysis. In addition to participating in the radical chain reaction, NO positively affects macrophage M1 polarization to yield potent phagocytosis to MRSA. As a result, without introducing an extra sonosensitizer, BaTiO3-x/LA exhibits excellent antibacterial activity against MRSA after the US treatment for 15 min. Furthermore, BaTiO3-x/LA facilitates macrophage M2 polarization after implantation and improves osteogenic differentiation. The combined effects of sonodynamic therapy and immunoregulation lead to an effective and safe treatment method for implant-associated infections.

Multilevel Information Encryption Based on Thermochromic Perovskite Microcapsules via Orthogonal Photic and Thermal Stimuli Responses

Increasing modal variations of stimulus-responsive materials ensure the high capacity and confidentiality of information storage and encryption systems that are crucial to information security. Herein, thermochromic perovskite microcapsules (TPMs) with dual-variable and quadruple-modal reversible properties are designed and prepared on the original oil-in-fluorine (O/F) emulsion system. The TPMs respond to the orthogonal variations of external UV and thermal stimuli in four reversible switchable modes and exhibit excellent thermal, air, and water stability due to the protection of perovskites by the core-shell structure. Benefiting from the high-density information storage TPMs, multiple information encryptions and decryptions are demonstrated. Moreover, a set of devices are assembled for a multilevel information encryption system. By taking advantage of TPMs as a "private key" for decryption, the signal can be identified as the corresponding binary ASCII code and converted to the real message. The results demonstrate a breakthrough in high-density information storage materials as well as a multilevel information encryption system based on switchable quadruple-modal TPMs.

First-principles study of multifunctional Mn2B3 materials with high hardness and ferromagnetism

Transition metal boride TM2B3 is widely studied in the field of physics and materials science. However, Mn2B3 has not been found in Mn-B systems so far. Mn2B3 undergoes phase transitions from Cmcm (0-28 GPa) to C2/m (28-80 GPa) and finally to C2/c (80-200 GPa) under pressure. Among these stable phases, Cmcm- and C2/m-Mn2B3s comprise six-membered boron rings and C2/c-Mn2B3 has wavy boron chains. They all have good mechanical properties and can become potential multifunctional materials. The strong B-B covalent bonding is mainly responsible for the structural stability and hardness. Comparison of the hardness of the five TM2B3s with different bonding strengths of TM-B and B-B bonds reveals a nonlinear change in the hardness. According to the Stoner model, these structures possess ferromagnetism, and the corresponding magnetic moments are almost the same as those of GGA and GGA + U (U = 3.9 eV, J = 1 eV).

Data-Driven Controlled Synthesis of Oriented Quasi-Spherical CsPbBr3 Perovskite Materials

Controlled synthesis of lead-halide perovskite crystals is challenging yet attractive because of the pivotal role played by the crystal structure and growth conditions in regulating their properties. This study introduces data-driven strategies for the controlled synthesis of oriented quasi-spherical CsPbBr3, alongside an investigation into the synthesis mechanism. High-throughput rapid characterization of absorption spectra and color under ultraviolet illumination was conducted using 23 possible ligands for the synthesis of CsPbBr3 crystals. The links between the absorption spectra slope (difference in the absorbance at 400 nm and 450 nm divided by a wavelength interval of 50 nm) and crystal size were determined through statistical analysis of more than 100 related publications. Big data analysis and machine learning were employed to investigate a total of 688 absorption spectra and 652 color values, revealing correlations between synthesis parameters and properties. Ex situ characterization confirmed successful synthesis of oriented quasi-spherical CsPbBr3 perovskites using polyvinylpyrrolidone and Acacia. Density functional theory calculations highlighted strong adsorption of Acacia on the (110) facet of CsPbBr3. Optical properties of the oriented quasi-spherical perovskites prepared with these data-driven strategies were significantly improved. This study demonstrates that data-driven controlled synthesis facilitates morphology-controlled perovskites with excellent optical properties.

Self-Assembled Multilayered Coatings with Multiple Cyclic Self-Healing Capability, Bacteria Killing, Osteogenesis, and Angiogenesis Properties on Magnesium Alloys

Self-healing coatings improve the durability of magnesium (Mg) implants, but rapid corrosion still poses a challenge in the healing stage. Moreover, Mg-based materials with acceptable bacteria killing, osteogenic and angiogenic properties are challenging in biomedical applications. Herein, the self-healing polymeric coatings are fabricated on Mg alloys using the spin-assisted layer-by-layer (SLbL) assembly of hyaluronic acid (HA) and branched polyethyleneimine (bPEI) followed by chemical crosslinking treatment. The self-healing coatings show excellent adhesion strength and structure stability. The corrosion resistance is improved due to the physical barrier of polymer coatings, which also promotes the formation of hydroxyapatite (HAp) during degradation for further protection of Mg substrate. Owing to the dynamic reversible hydrogen bonds existing between HA and bPEI, the crosslinked multilayered coatings possess fast, substantial, and cyclic self-healing capabilities leading to restoration of the original structure and functions. In vitro investigations reveal that the self-healing coatings have multiple functionalities pertaining to bacteria killing, cytocompatibility, osteogenesis, as well as angiogenesis. In addition, the self-healing coatings stimulate alkaline phosphatase activity (ALP), extracellular matrix (ECM) mineralization, and the expression of osteogenesis-related genes of mBMSCs and HUVECs. This study reveals a feasible strategy to design and prepare versatile self-healing coatings on Mg implants for biomedical applications.

Interdisciplinary-Inspired Smart Antibacterial Materials and Their Biomedical Applications

The discovery of antibiotics has saved millions of lives, but the emergence of antibiotic-resistant bacteria has become another problem in modern medicine. To avoid or reduce the overuse of antibiotics in antibacterial treatments, stimuli-responsive materials, pathogen-targeting nanoparticles, immunogenic nano-toxoids, and biomimetic materials are being developed to make sterilization better and smarter than conventional therapies. The common goal of smart antibacterial materials (SAMs) is to increase the antibiotic efficacy or function via an antibacterial mechanism different from that of antibiotics in order to increase the antibacterial and biological properties while reducing the risk of drug resistance. The research and development of SAMs are increasingly interdisciplinary because new designs require the knowledge of different fields and input/collaboration from scientists in different fields. A good understanding of energy conversion in materials, physiological characteristics in cells and bacteria, and bactericidal structures and components in nature are expected to promote the development of SAMs. In this review, the importance of multidisciplinary insights for SAMs is emphasized, and the latest advances in SAMs are categorized and discussed according to the pertinent disciplines including materials science, physiology, and biomimicry.

Ca-doping interfacial engineering and glycolysis enable rapid charge separation for efficient phototherapy of MRSA-infected wounds

Methicillin-resistant Staphylococcus aureus (MRSA) is the primary pathogenic agent responsible for epidermal wound infection and suppuration, seriously threatening the life and health of human beings. To address this fundamental challenge, we propose a heterojunction nanocomposite (Ca-CN/MnS) comprised of Ca-doped g-C3N4 and MnS for the therapy of MRSA-accompanied wounds. The Ca doping leads to a reduction in both the bandgap and the singlet state S1-triplet state T2 energy gap (ΔEST). The Ca doping also facilitates the two-photon excitation, thus remarkably promoting the separation and transfer of 808 nm near-infrared (NIR) light-triggered electron-hole pairs together with the built-in electric field. Thereby, the production of reactive oxygen species and heat are substantially augmented nearby the nanocomposite under 808 NIR light irradiation. Consequently, an impressive photocatalytic MRSA bactericidal efficiency of 99.98% ± 0.02% is achieved following exposure to NIR light for 20 min. The introduction of biologically functional elements (Ca and Mn) can up-regulate proteins such as pyruvate kinase (PKM), L-lactate dehydrogenase (LDHA), and calcium/calmodulin-dependent protein kinase (CAMKII), trigger the glycolysis and calcium signaling pathway, promote cell proliferation, cellular metabolism, and angiogenesis, thereby expediting the wound-healing process. This heterojunction nanocomposite, with its precise charge-transfer pathway, represents a highly effective bactericidal and bioactive system for treating multidrug-resistant bacterial infections and accelerating tissue repair. STATEMENT OF SIGNIFICANCE: Due to the bacterial resistance, developing an antibiotic-free and highly effective bactericidal strategy to treat bacteria-infected wounds is critical. We have designed a heterojunction consisting of calcium doped g-C3N4 and MnS (Ca-CN/MnS) that can rapidly kill methicillin-resistant Staphylococcus aureus (MRSA) without damaging normal tissue through a synergistic effect of two-photon stimulated photothermal and photodynamic therapy. In addition, the release of trace amounts of biofunctional elements Mn and Ca triggers glycolysis and calcium signaling pathways that promote cellular metabolism and cell proliferation, contributing to tissue repair and wound healing.

Fabrication of Single-Crystal Violet Phosphorus Flakes For Ultrasensitive Photodetection

Violet phosphorus (VP) has attracted a lot of attention for its unique physicochemical properties and emerging potential in photoelectronic applications. Although VP has a van der Waals (vdW) structure similar to that of other 2D semiconductors, direct synthesis of VP on a substrate is still challenging. Moreover, optoelectronic devices composed of transfer-free VP flakes have not been demonstrated. Herein, a bismuth-assisted vapor phase transport technique is designed to grow uniform single-crystal VP flakes on the SiO2 /Si substrate directly. The size of the crystalline VP flakes is an order of magnitude larger than that of previous liquid-exfoliated samples. The photodetector fabricated with the VP flakes shows a high responsivity of 12.5 A W-1 and response/recovery time of 3.82/3.03 ms upon exposure to 532 nm light. Furthermore, the photodetector shows a small dark current (<1 pA) that is beneficial to high-sensitivity photodetection. As a result, the detectivity is 1.38 × 1013 Jones that is comparable with that of the vdW p-n heterojunction detector. The results reveal the great potential of VP in optoelectronic devices as well as the CVT technique for the growth of single-crystal semiconductor thin films.

Cotton Fibers with a Lactic Acid-Like Surface for Re-establishment of Protective Lactobacillus Microbiota by Selectively Inhibiting Vaginal Pathogens

Failure to reconstruct the Lactobacillus microbiota is the major reason for the recurrence of vaginal infection. However, most empiric therapies focus on the efficacy of pathogen elimination but do not sufficiently consider the viability of Lactobacillus. Herein, cotton fibers with a lactic acid-like surface (LC) are fabricated by NaIO4 oxidation and L-isoserine grafting. The lactic acid analog chain ends and imine structure of LC can penetrate cell walls to cause protein cleavage in Escherichia coli and Candida albicans and inhibit vaginal pathogens. Meanwhile, the viability of Lactobacillus acidophilus is unaffected by the LC treatment, thus revealing a selective way to suppress pathogens as well as provide a positive route to re-establish protective microbiota in the vaginal tract. Moreover, LC has excellent properties such as good biosafety, antiadhesion, water absorption, and weight retention. The strategy proposed here not only is practical, but also provides insights into the treatment of vaginal infections.

Using machine learning to enlarge the measurement range and promote the compactness of the optical fiber torsion sensor based on the Sagnac interferometer

The support vector regression (SVR) algorithm is presented to demodulate the torsion angle of an optical fiber torsion sensor based on the Sagnac interferometer with the panda fiber. Experimental results demonstrate that with the aid of SVR algorithm, the information in the transmission spectrum of the sensor can be used fully to realize the regression prediction of the directional torsion angle. The full torsion angle ranges from -360° to 360° can be predicted with a mean absolute error (MAE) of 2.24° and determination coefficient (R2) of 0.9996. The impact of the angle sampling interval and wavelength resolution of the spectrometer on the prediction accuracy of the directional torsion angle and the suitability of the SVR algorithm for compact optical fiber sensor and other optical fiber torsion sensors based on the Sagnac interferometer are discussed. Moreover, the multi-objective SVR algorithm is used to eliminate the interference of strain during torsion angle measurement. The SVR algorithm can efficiently enlarge the measurement range of the torsion angle and break through the challenge of demodulating sensing signal for compact fiber torsion sensor. Compared to the prediction accuracy of common machine learning algorithms of artificial neural network (ANN) algorithm, random forest (RF) algorithm, and K-nearest neighbor (KNN) algorithm, the SVR algorithm has the advantages of higher measurement accuracy and shorter testing time.

BiTiS3 bio-transducer with explosive on-demand generation of NO gas for synergetic cancer therapy

Combined photothermal therapy and nitric oxide (NO)-mediated gas therapy has shown great potential as a cancer treatment. However, the on-demand release of NO at a high concentration presents a challenge owing to the lack of an ideal bio-transducer with a high loading capacity of NO donors and sufficient energy to induce NO release. Here, we present a new 2D BiTiS3 nanosheet that is synthesized, loaded with the NO donor (BNN6), and conjugated with PEG-iRGD to produce a multifunctional bio-transducer (BNN6-BiTiS3-iRGD) for the on-demand production of NO. The BiTiS3 nanosheets not only have a high loading capacity of NO donors (750%), but also exhibit a high photothermal conversion efficiency (59.5%) after irradiation by a 1064-nm laser at 0.5 W/cm2. As a result of the above advantages, the temporal-controllable generation of NO within a large dynamic range (from 0 to 344 μM) is achieved by adjusting power densities, which is among the highest efficiency values reported for NO generators so far. Moreover, the targeted accumulation of BNN6-BiTiS3-iRGD at tumor sites leads to spatial-controllable NO release. In vitro and in vivo assessments demonstrate synergistic NO gas therapy with mild photothermal therapy based on BNN6-BiTiS3-iRGD. Our work provides insights into the design and application of other 2D nanomaterial-based therapeutic platforms.

Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries

Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.

Percolating Network of Anionic Vacancies in Prussian Blue: Origin of Superior Ammonium-Ion Storage Performance

Emerging aqueous ammonium-ion batteries (AIBs) are considered inexpensive, highly safe, ecofriendly, and sustainable energy storage systems. Although some high-performance electrode materials have been reported for AIBs, a comprehensive understanding of the origin of the high ammonium-ion storage performance is still lacking. Herein, the percolating network of anionic vacancies is determined to be the origin of the superior ammonium-ion storage properties of the Prussian blue analogues based on ab initio molecular dynamics simulation and electrochemical kinetic analyses. Fe[Fe(CN)6] with a percolating anionic vacancy network delivers an outstanding rate of 64.7 mAh g-1 at 2000 mA g-1 in addition to a capacity retention of 94.5% after 10 000 cycles. The low-strain intercalation ammonium-ion storage mechanism of highly deficient Fe Prussian blue with Fe as the redox center is revealed by in situ X-ray diffraction and ex situ X-ray absorption fine structure analysis. The results provide insights into the mechanism of ammonium-ion storage in Prussian blue analogues and guidance in the development of aqueous AIBs.

Potassium-Rich Iron Hexacyanoferrate/Carbon Cloth Electrode for Flexible and Wearable Potassium-Ion Batteries

The fast development of flexible and wearable electronics increases the demand for flexible secondary batteries, and the emerging high-performance K-ion batteries (KIBs) have shown immense promise for the flexible electronics due to the abundant and cost-effective potassium resources. However, the implementation of flexible cathodes for KIBs is hampered by the critical issues of low capacity, rapid capacity decay with cycles, and limited initial Coulombic efficiency. To address these pressing issues, a freestanding K-rich iron hexacyanoferrate/carbon cloth (KFeHCF/CC) electrode is designed and fabricated by cathodic deposition. This innovative binder-free and self-supporting KFeHCF/CC electrode not only provides continuous conductive channels for electrons, but also accelerates the diffusion of potassium ions through the active electrode-electrolyte interface. Moreover, the nanosized potassium iron hexacyanoferrate particles limit particle fracture and pulverization to preserve the structure and stability during cycling. As a result, the K-rich KFeHCF/CC electrode shows a reversible discharging capacity of 110.1 mAh g-1 at 50 mA g-1 after 100 cycles in conjunction with capacity retention of 92.3% after 1000 cycles at 500 mA g-1 . To demonstrate the commercial feasibility, a flexible tubular KIB is assembled with the K-rich KFeHCF/CC electrode, and excellent flexibility, capacity, and stability are observed.

Diffusion-driven fabrication of calcium and phosphorous-doped zinc oxide heterostructures on titanium to achieve dual functions of osteogenesis and preventing bacterial infections

Conventional Ti-based implants are vulnerable to postsurgical infection and improving the antibacterial efficiency without compromising the osteogenic ability is one of the key issues in bone implant design. Although zinc oxide (ZnO) nanorods grown on Ti substrates hydrothermally can improve the antibacterial properties, but cannot meet the stringent requirements of bone implants, as rapid degradation of ZnO and uncontrolled leaching of Zn2+ are detrimental to peri-implant cells and tissues. To solve these problems, a lattice-damage-free method is adopted to modify the ZnO nanorods with thin calcium phosphate (CaP) shells. The Ca and P ions from the CaP shells diffuse thermally into the ZnO lattice to prevent the ZnO nanorods from rapid degradation and ensure the sustained release of Zn2+ ions as well. Furthermore, the designed heterostructural nanorods not only induce the osteogenic performances of MC3T3-E1 cells but also exhibit excellent antibacterial ability against S. aureus and E. coli bacteria via physical penetration. In vivo studies also reveal that hybrid Ti-ZnO@CaP5 can not only eradicates bacteria in contact, but also provides sufficient biocompatibility without causing excessive inflammation response. Our study provides insights into the design of multifunctional biomaterials for bone implants. STATEMENT OF SIGNIFICANCE: • A lattice-damage-free method is adopted to modify the ZnO nanorods with thin calcium phosphate (CaP) shells. • The dynamic process of Ca and P diffusion into the ZnO lattice is analyzed by experimental verification and theoretical calculation. • The degradation rate of ZnO nanorods is significantly decreased after CaP deposition. • The ZnO nanorods after CaP deposition can not only sterilize bacteria in contact via physical penetration, but also provide sufficient biocompatibility and osteogenic capability without causing excessive inflammation response..

High FOM PCF-SPR refractive index sensor based on MgF2-Au double-layer films

A simple twin-core D-shape photonic crystal fiber sensor based on surface plasmon resonance (SPR) is designed for the measurement of refractive indices (RI). The twin-core D-shape structure enhances the SPR effect, and the M g F 2-Au dual-layer film narrows the linewidth in the loss spectrum, consequently improving both the sensitivity and figure of merit (FOM). The properties of the sensor are analyzed by the finite element method. In the RI range of 1.32-1.42, the maximum wavelength sensitivity, FOM, and resolution are 62,000 nm/RIU, 1281R I U -1, and 1.61×10-6, respectively.

Semimetallic Bismuthene with Edge-Rich Dangling Bonds: Broad-Spectrum-Driven and Edge-Confined Electron Enhancement Boosting CO2 Hydrogenation Reduction

Broad-spectrum-driven high-performance artificial photosynthesis is quite challenging. Herein, atomically ultrathin bismuthene with semimetallic properties is designed and demonstrated for broad-spectrum (ultraviolet-visible-near infrared light) (UV-vis-NIR)-driven photocatalytic CO2 hydrogenation. The trap states in the bandgap produced by edge dangling bonds prolong the lifetime of the photogenerated electrons from 90 ps in bulk Bi to 1650 ps in bismuthine, and excited-state electrons are enriched at the edge of bismuthine. The edge dangling bonds of bismuthene as the active sites for adsorption/activation of CO2 increase the hybridization ability of the Bi 6p orbital and O 2p orbital to significantly reduce the catalytic reaction energy barrier and promote the formation of C─H bonds until the generation of CH4 . Under λ ≥ 400 nm and λ ≥ 550 nm irradiation, the utilization ratios of photogenerated electron reduction CO2 hydrogenation to CO and CH4 for bismuthene are 58.24 and 300.50 times higher than those of bulk Bi, respectively. Moreover, bismuthene can extend the CO2 hydrogenation reaction to the near-infrared region (λ ≥ 700 nm). This pioneering work employs the single semimetal element as an artificial photosynthetic catalyst to produce a broad spectral response.

Unleashing the Potential of MXene-Based Flexible Materials for High-Performance Energy Storage Devices

Since the initial discovery of Ti3 C2 a decade ago, there has been a significant surge of interest in 2D MXenes and MXene-based composites. This can be attributed to the remarkable intrinsic properties exhibited by MXenes, including metallic conductivity, abundant functional groups, unique layered microstructure, and the ability to control interlayer spacing. These properties contribute to the exceptional electrical and mechanical performance of MXenes, rendering them highly suitable for implementation as candidate materials in flexible and wearable energy storage devices. Recently, a substantial number of novel research has been dedicated to exploring MXene-based flexible materials with diverse functionalities and specifically designed structures, aiming to enhance the efficiency of energy storage systems. In this review, a comprehensive overview of the synthesis and fabrication strategies employed in the development of these diverse MXene-based materials is provided. Furthermore, an in-depth analysis of the energy storage applications exhibited by these innovative flexible materials, encompassing supercapacitors, Li-ion batteries, Li-S batteries, and other potential avenues, is conducted. In addition to presenting the current state of the field, the challenges encountered in the implementation of MXene-based flexible materials are also highlighted and insights are provided into future research directions and prospects.

Cobalt-Nickel Layered Double Hydroxides on Electrospun MXene for Superior Asymmetric Supercapacitor Electrodes

Flexible electrodes for energy storage and conversion require a micro-nanomorphology and stable structure. Herein, MXene fibers (MX-CNF) are fabricated by electrospinning, and Co-MOF nanoarrays are prepared on the fibers to form Co-MOF@MX-CNF. Hydrolysis and etching of Co-MOF@MX-CNF in the Ni2+ solution produce cobalt-nickel layered double hydroxide (CoNi-LDH). The CoNi-LDH nanoarrays on the MX-CNF substrate have a large specific surface area and abundant electrochemical active sites, thus ensuring effective exposure of the CoNi-LDH active materials to the electrolyte and efficient pseudocapacitive energy storage and fast reversible redox kinetics for enhanced charging-discharging characteristics. The CoNi-LDH@MX-CNF electrode exhibits a discharge capacity of 996 F g-1 at a current density of 1 A g-1 as well as 78.62% capacitance retention after 3,000 cycles at 10 A g-1. The asymmetric supercapacitor (ASC) comprising the CoNi-LDH@MX-CNF positive electrode and negative activated carbon electrode shows an energy density of 48.4 Wh kg-1 at a power density of 499 W kg-1 and a capacity retention of 78.9% after 3,000 cycles at a current density of 10 A g-1. Density-functional theory calculations reveal the charge density difference and partial density of states of CoNi-LDH@MX-CNF confirming the large potential of the CoNi-LDH@MX-CNF electrode in energy storage applications.

Synthesis of germanium/germanium phosphide in-plane heterostructure with efficient photothermal and enhanced photodynamic effects in the second near-infrared biowindow

Inspired by the bifunctional phototherapy agents (PTAs), constructing compact PTAs with efficient photothermal therapy (PTT) and photodynamic therapy (PDT) effects in the near-infrared (NIR-II) biowindow is crucial for high therapeutic efficacy. Herein, none-layered germanium (Ge) is transformed to layered Ge/germanium phosphide (Ge/GeP) structure, and a novel two-dimensional sheet-like compact S-scheme Ge/GeP in-plane heterostructure with a large extinction coefficient of 15.66 L/g cm-1 at 1,064 nm is designed and demonstrated. In addition to the outstanding photothermal effects, biocompatibility and degradability, type I and type II PDT effects are activated by a single laser. Furthermore, enhanced reactive oxygen species generation under longer wavelength NIR laser irradiation is achieved, and production of singlet oxygen and superoxide radical upon 1,064 nm laser irradiation is more than double that under 660 nm laser irradiation. The S-scheme charge transfer mechanism between Ge and GeP, is demonstrated by photo-irradiated Kelvin probe force microscopy and electron spin resonance analysis. Thus, the obtained S-scheme Ge/GeP in-plane heterostructure shows synergistic therapeutic effects of PTT/PDT both in vitro and in vivo in the NIR-II biowindow and the novel nanoplatform with excellent properties has large clinical potential.

Selective oxidation of p-phenylenediamine for blood glucose detection enabled by Se-vacancy-rich TiSe2-x@Au nanozyme

Nanozymes with enzyme-like characteristics have drawn wide interest but the catalytic activity and substrate selectivity of nanozymes still need improvement. Herein, Se-vacancy-rich TiSe2-x@Au nanocomposites are designed and demonstrated as nanozymes. The TiSe2-x@Au nanocomposites show excellent peroxidase-like activity and the chromogenic substrate p-phenylenediamine (PPD) can be selectively oxidized to compounds that exhibit an absorption peak at 413 nm that differs from that of self-oxidation or generally oxidized species, suggesting high catalytic activity and strong substrate selectivity. Theoretical calculations reveal that the PPD adsorption geometry at Se vacancies with an adsorption energy of -3.00 eV shows a unique spatial configuration and charge distribution, thereby inhibiting the free reaction and promoting both the activity and selectivity in PPD oxidation. The TiSe2-x@Au colorimetric system exhibits a wide linear range of 0.015 mM-0.6 mM and a low detection limit of 0.0037 mM in the detection of glucose. The blood glucose detection performance for human serum samples is comparable to that of a commercial glucose meter in the hospital (relative standard deviation < 6%). Our findings demonstrate a new strategy for rapid and accurate detection of blood glucose and our results provide insights into the future design of nanozymes.

Stacking Engineering of Heterojunctions in Half-Metallic Carbon Nitride for Efficient CO2 Photoreduction

Enhancing charge separation in semiconductor photocatalysts is a major challenge for efficient artificial photosynthesis. Herein, a compact heterojunction is designed by embedding half-metallic C(CN)3 (hm-CN) hydrothermally in BiOBr (BOB) as the backbone. The interface between hm-CN and BOB is seamless and formed by covalent bonding to facilitate the transmission of photoinduced electrons from BOB to hm-CN. The transient photocurrents and electrochemical impedance spectra reveal that the modified composite catalyst exhibits a larger electron transfer rate. The photocatalytic activity of hm-CN/BOB increases significantly as indicated by a CO yield that is about four times higher than that of individual components. Density-functional theory calculations verify that the heterojunction improves electron transport and decreases the reaction energy barrier, thus promoting the overall photocatalytic CO2 conversion efficiency. The half-metal nitride coupled semiconductor heterojunctions might have large potential in artificial photosynthesis and related applications.

Ti3C2Tx MXene-embedded MnO2-based hydrophilic electrospun carbon nanofibers as a freestanding electrode for supercapacitors

Herein, MnO2 nanoflowers are electrodeposited on a self-supported and electroconductive electrode in which 2D Ti3C2Tx nanosheets are encased in carbon nanofibers (MnO2@Ti3C2Tx/CNFs). This improves the conductivity and hydrophilicity of the MnO2 composite electrode. The asymmetric supercapacitor shows a high energy density of 46.4 W h kg-1 and a power density of 4 kW kg-1.

Selectively Confined Black Phosphorus Nanowires in Carbon Nanotubes

Nanoconfinement of low-dimensional materials opens up a new territory for tailoring material hybridization to produce novel geometric structures for applications in electronics, catalysis, and photonics. Despite the progress made in the encapsulation of 2D materials, exploration of their definite crystal structures into lower-dimensional nanomaterials is still largely unexplored. Herein, one-dimensional black phosphorus (BP) nanowires with an aspect ratio of over 100 produced by confining BP into the CNT (conf-BP@CNT) are reported. Notably, the unique structure and dimensions of BP were determined by confinement within the CNT and were accurately characterized by crystallography. During the spatially confined growth, the defects and capillarity effect of the CNT promote nucleation and growth of BP within the CNT. conf-BP@CNT shows surface charge localization of conf-BP and protection rendered by the CNT shell, giving rise to more efficient and stable photocatalytic rhodamine B (RhB) degradation than the bare exfoliated BP nanosheets. These results demonstrate the effectiveness of nanoconfinement in producing nanomaterials with controllable dimensions, precise spatial arrangement, and unique structures.

Interfacial Engineering Enables Perovskite Heteroepitaxial Growth on Black Phosphorus for Flexible X-ray Detectors

2D materials with atomic-scale thickness and mechanical robustness are required for flexible devices. The superior optoelectronic properties and high-Z atoms in metal halide perovskites render them desirable for X-ray detection, but the intrinsic brittleness is an obstacle hampering the applications in flexible detectors. Herein, an interfacial engineering strategy is demonstrated for the epitaxial growth of methylammonium lead bromide (MAPbBr3 ) on black phosphorus (BP) for flexible X-ray detectors. The mechanically robust, high-quality heterostructure consisting of a Pb transition layer is synthesized for the two-way bridging of BP and MAPbBr3 . Excellent optoelectronic properties such as a high X-ray sensitivity of 1,609 ± 122 µC Gy-1  cm-2 (80 times higher than that of the commercial amorphous Se), a fast response time of 40 ± 5 ms, as well as a low detection limit of 3 µGys-1 (about a fifteenth of the medical chest X-ray dose rate) are achieved from the simple and planar direct X-ray detector fabricated on an organic filter membrane. More importantly, these flat and simple devices are bendable and mechanically durable by exhibiting only 10% photocurrent degradation after 200 bending cycles. The novel heterostructure has great potential in large-area, flexible, and sensitive X-ray detection applications.

Bio-orthogonal engineered peptide: A multi-functional strategy for the gene therapy of osteoporotic bone loss

Osteoporosis is a degenerative disease affecting millions of elderly people globally and increases the risk of bone fractures due to the reduced bone density. Drugs are normally prescribed to treat osteoporosis, especially after surgical treatment of osteoporotic fractures. However, many anti-osteoporotic drugs produce deleterious side effects. The recent development of gene therapy utilizing oligonucleotides (ONs) has spurred the development of new therapies for osteoporosis. Nevertheless, most ONs lack the capability of cell penetration and lysosome escape and hence, intracellular delivery of ON remains a challenge. Herein, a novel strategy is demonstrated to efficiently deliver ON to cells by combining ON with the cell-penetrating peptide (CPP) via the bio-orthogonal click reaction. Several dopamine (DOPA) groups are also introduced into the fabricated peptide to scavenge intracellular reactive oxygen species (ROS). Owing to favorable properties such as good cytocompatibility, cell penetration, lysosome escape, ROS scavenging, and osteoclastogenesis suppression, the hybrid CPP-DOPA-ON peptide improves the osteoporotic conditions significantly in vivo even when bone implants are involved. This strategy has great potential in the treatment of osteoporosis and potentially broadens the scope of gene therapy.

Multi-wavelength unidirectional forward scattering properties of the arrow-shaped gallium phosphide nanoantenna

An arrow-shaped gallium phosphide nanoantenna exhibits both near-field electric field enhancement and far-field unidirectional scattering, and the interference conditions involve electric and magnetic quadrupoles as well as toroidal dipoles. By using long-wavelength approximation and exact multipole decomposition, the interference conditions required for far-field unidirectional transverse light scattering and backward near-zero scattering at multiple wavelengths are determined. The near-field properties are excellent, as exemplified by large Purcell factors of 4.5×109 for electric dipole source excitation, 464.68 for magnetic dipole source excitation, and 700 V/m for the field enhancement factor. The degree of enhancement of unidirectional scattering is affected by structural parameters such as the angle and thickness of the nanoantenna. The arrow-shaped nanoantenna is an efficient platform to enhance the electric field and achieve high directionality of light scattering. Moreover, the nanostructure enables flexible manipulation of light waves and materials, giving rise to superior near-field and far-field performances, which are of great importance pertaining to the practicability and application potential of optical antennas in applications such as spectroscopy, sensing, displays, and optoelectronic devices.

Controllability of the Conductive Filament in Porous SiOx Memristors by Humidity-Mediated Silver Ion Migration

Oxide-based memristors composed of Ag/porous SiOx/Si stacks are fabricated using different etching time durations between 0 and 90 s, and the memristive properties are analyzed in the relative humidity (RH) range of 30-60%. The combination of humidity and porous structure provides binding sites to control silver filament formation with a confined nanoscale channel. The memristive properties of devices show high on/off ratios up to 108 and a dispersion coefficient of 0.1% of the high resistance state (CHRS) when the RH increases to 60%. Humidity-mediated silver ion migration in the porous SiOx memristors is investigated, and the mechanism leading to the synergistic effects between the porous structure and environmental humidity is elucidated. The artificial neural network constructed theoretically shows that the recognition rate increases from 60.9 to 85.29% in the RH range of 30-60%. The results and theoretical understanding provide insights into the design and optimization of oxide-based memristors in neuromorphic computing applications.

pH/NIR-responsive and self-healing coatings with bacteria killing, osteogenesis, and angiogenesis performances on magnesium alloy

Although biodegradable polymer coatings can impede corrosion of magnesium (Mg)-based orthopedic implants, they are prone to excessive degradation and accidental scratching in practice. Bone implant-related infection and limited osteointegration are other factors that adversely impact clinical application of Mg-based biomedical implants. Herein, a self-healing polymeric coating is constructed on the Mg alloy together with incorporation of a stimuli-responsive drug delivery nanoplatform by a spin-spray layer-by-layer (SSLbL) assembly technique. The nanocontainers are based on simvastatin (SIM)-encapsulated hollow mesoporous silica nanoparticles (S@HMSs) modified with polydopamine (PDA) and polycaprolactone diacrylate (PCL-DA) bilayer. Owing to the dynamic reversible reactions, the hybrid coating shows a fast, stable, and cyclical water-enabled self-healing capacity. The antibacterial assay indicates good bacteria-killing properties under near infrared (NIR) irradiation due to synergistic effects of hyperthermia, reactive oxygens species (ROS), and SIM leaching. In vitro results demonstrate that NIR laser irradiation promotes the cytocompatibility, osteogenesis, and angiogenesis. The coating facilitates alkaline phosphatase activity and expedites extracellular matrix mineralization as well as expression of osteogenesis-related genes. This study reveals a useful strategy to develop multifunctional coatings on bioabsorbable Mg alloys for orthopedic implants.

Machine-learning-assisted omnidirectional bending sensor based on a cascaded asymmetric dual-core PCF sensor

An omnidirectional bending sensor comprising cascaded asymmetric dual-core photonic crystal fibers (ADCPCFs) is designed and demonstrated experimentally. Upon cascading and splicing two ADCPCFs at a lateral rotation angle, the transmission spectrum of the sensor becomes highly dependent on the bending direction. Machine learning (ML) is employed to predict the curvature and bending orientation of the bending sensor for the first time, to the best of our knowledge. The experimental results demonstrate that the ADCPCF sensor used in combination with machine learning can predict the curvature and omnidirectional bending orientation within 360° without requiring any post-processing fabrication steps. The prediction accuracy is 99.85% with a mean absolute error (MAE) of 2.7° for bending direction measurement and 98.08% with an MAE of 0.03 m-1 for the curvature measurement. This promising strategy utilizes the global features (full spectra) in combination with machine learning to overcome the dependence of the sensor on high-quality transmission spectra, the wavelength range, and a special wavelength dip in the conventional dip tracking method. This excellent omnidirectional bending sensor has large potential for structural health monitoring, robotic arms, medical instruments, and wearable devices.

Ultra-broadband 3-dB coupler based on dual-hollow-core polymer fiber covering E + S + C + L + U band

An ultra-broadband 3-dB coupler based on a polymer dual-hollow-core anti-resonant fiber (DHC-ARF) is designed to work in the E + S + C + L + U communication band. By incorporating two elliptical-like cores and modulating the air gap between the two cores, the wavelength and polarization dependence of the DHC-ARF-based coupler is reduced effectively. The feasibility of using a 1.46 cm long DHC-ARF as the ultra-broadband coupler for the operating bandwidth of 400 nm in the range between 1.33 µm and 1.73 µm is demonstrated theoretically. The coupling ratio of each polarized mode stabilizes at 50 ± 2% and the coupling ratio difference between the two polarized modes changes within ±0.6%. This DHC-ARF coupler which is made of a polymer can be fabricated by high-resolution 3D printing. Compared to a silica-based DHC-ARF coupler, the polymer-based DHC-ARF coupler is easier to manufacture and the total loss of the latter is only 0.041 ± 0.006 dB in the operating bandwidth. The polymer hollow-core fiber coupler boasting an ultra-broadband, short component length, and low loss is very promising in next-generation, high-speed, and large-capacity hollow-core fiber communication systems.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Effects of different cladding materials on orbital angular momentum modes propagating in photonic crystal fibers

With the development of orbital angular momentum (OAM) photonic crystal fibers (PCFs) for more efficient communication, fiber claddings are important to the performance. In this paper, the influence of S i O 2 and four new optical materials, which are amethyst, SSK2, SF11, and LaSF09, as cladding materials, on the OAM mode characteristics is studied based on a common PCF for OAM transmission. In addition, the effective index difference, dispersion, confinement loss, and other properties of OAM modes transmitted in the five materials are derived by the finite element method. After in-depth analysis, universal rules can be obtained as guidelines for optimization of PCF in the future for improving the efficiency of optical fiber communication. Through chart analysis, it can be concluded that when materials of high effective refractive indices are used as cladding materials for PCF, the dispersion, nonlinear coefficient, confinement loss, mode purity, and other properties are significantly improved. Lower dispersion and confinement loss are more conducive to long-distance communication transmission. The decrease in nonlinear coefficient represents a better effect in suppressing nonlinear effects, and the increase in numerical aperture and mode purity respectively improves the transmission efficiency and stability of OAM communication. These conclusions provide universal rules for high-quality communication in the future.

3D-printed high-birefringence THz hollow-core anti-resonant fiber with an elliptical core

A high-birefringence and low-loss terahertz (THz) hollow-core anti-resonant fiber (THz HC-ARF) is designed and analyzed numerically by the finite element method (FEM). The THz HC-ARF is composed of an elliptical tube as the core for high birefringence guidance and a pair of symmetrical slabs arranged vertically as the cladding to attain low loss. Numerical analysis indicates that the birefringence reaches 10-2 in the transmission window between 0.21 and 0.35 THz. The highest birefringence is 4.61 × 10-2 at 0.21 THz with a loss of 0.15 cm-1. To verify the theoretical results, the THz HC-ARF is produced by three-dimensional (3D) printing, and the transmission characteristics are determined by THz time-domain spectroscopy (THz-TDS). High birefringence in the range of 2.17 × 10-2 to 3.72 × 10-2 and low loss in the range of 0.12 to 0.18 cm-1 are demonstrated experimentally in the 0.2 to 0.27 THz transmission window. The highest birefringence is 3.72 × 10-2 at 0.22 THz and the corresponding loss is 0.18 cm-1. The THz HC-ARF shows the highest birefringence besides relatively low loss compared to similar THz HC-ARFs reported recently.

Design of optical anapole modes of all-dielectric nanoantennas for SERS applications

To obtain large electric field enhancement while mitigating material losses, an all-dielectric nanoantenna composed of a heptamer and nanocubes is designed and analyzed. A numerical simulation by the finite element method reveals that the nanoantenna achieves the optical electric anapole modes, thereby significantly enhancing the coupling between different dielectrics to further improve the near-field enhancement and spontaneous radiation. Field enhancement factors |E/E 0|2 of 3,563 and 5,395 (AM1 and AM2) and a Purcell factor of 3,872 are observed in the wavelength range between 350 and 800 nm. This nanoantenna has promising potential in applications involving surface-enhanced Raman scattering and nonlinearities due to its low cost and excellent compatibility.

Correction: Construction of perfluorohexane/IR780@liposome coating on Ti for rapid bacteria killing under permeable near infrared light

Correction for 'Construction of perfluorohexane/IR780@liposome coating on Ti for rapid bacteria killing under permeable near infrared light' by Xiuhua Wang et al., Biomater. Sci., 2018, 6, 2460-2471, https://doi.org/10.1039/C8BM00602D.

Surface plasmon resonance sensor composed of a D-type photonic crystal fiber with a three-layer coating

A surface plasmon resonance sensor composed of photonic crystal fibers (PCF-SPR) with an A u-T i O 2-A u triple layer is designed for refractive index (RI) sensing and analyzed theoretically by the finite element method. The sensor exhibits enhanced resonance coupling between the core mode and surface plasmon polariton (SPP) mode as well as better sensitivity than the structure with a single gold coating. Furthermore, the A u-T i O 2-A u tri-layer structure narrows the linewidth of the loss spectrum and improves the figure of merit (FOM). In the analyte RI range of 1.30-1.42, the maximum wavelength sensitivity is 20,300 nm/RIU, resolution is 4.93×10-6, amplitude sensitivity is 6427R I U -1, and FOM is 559R I U -1. The results provide insights into the design of high-performance PCF-SPR sensors.

Double-ring-disk hybrid nanostructures with slits for electric field enhancement

Although noble metal nanoantennas have distinctive optical properties and local electric field enhancement, considerable non-radiative ohmic losses occur at the optical frequencies, consequently creating significant absorption and unwanted heating. Combining the plasmon mode of metal nanoantennas with the anapole mode of high refractive index dielectric materials offers a promising alternative to increase the electric field strength with minimal loss. Herein, a silicon disk with slots and two Au rings with a coupling mechanism are described. To elucidate the field enhancement mechanism, the near-field enhancement features and near-field electric field distributions are explored by a numerical simulation and multipole decomposition analysis. By opening the slit to generate high-intensity hot spots inside the disk, the electric field can be enhanced significantly, and nearby molecules can directly contact these hot spots. The resulting large field enhancement suggests significant applications to strong photon-exciton coupling and nonlinear photonics.

Conductive MOF on ZIF-Derived Carbon Fibers as Superior Anode in Sodium-Ion Battery

Superior specific capacity, high-rate capability, and long-term cycling stability are essential to anode materials in sodium-ion batteries, and conductive metal-organic frameworks (cMOF) with good electronic and ionic conductivity may satisfy these requirements. Herein, conductive neodymium cMOF (Nd-cMOF) produced in situ on the zeolitic imidazolate framework (ZIF)-derived carbon fiber (ZIF-CFs) platform is used to synthesize the Nd-cMOF/ZIF-CFs hierarchical structure. Four types of ZIFs with different pore diameters are prepared by electrospinning. In this novel structure, ZIF-CFs provide the electroconductivity, flexible porous structure, and mechanical stability, while Nd-cMOF provides the interfacial kinetic activity, electroconductivity, ample space, and volume buffer, consequently giving rise to robust structural integrity and excellent conductivity. The sodium-ion battery composed of the Nd-cMOF/ZIF-10-CFs anode has outstanding stability and electrochemical properties, such as a specific capacity of 480.5 mAh g^-1 at 0.05 A g^-1 as well as capacity retention of 84% after 500 cycles.

Cross-Link-Dependent Ionogel-Based Triboelectric Nanogenerators with Slippery and Antireflective Properties

Given the ability to convert various ambient unused mechanical energies into useful electricity, triboelectric nanogenerators (TENGs) are gaining interest since their inception. Recently, ionogel-based TENGs (I-TENGs) have attracted increasing attention because of their excellent thermal stability and adjustable ionic conductivity. However, previous studies on ionogels mainly pursued the device performance or applications under harsh conditions, whereas few have investigated the structure-property relationships of components to performance. The results indicate that the ionogel formulation-composed of a crosslinking monomer with an ionic liquid-affects the conductivity of the ionogel by modulating the cross-link density. In addition, the ratio of cross-linker to ionic liquid is important to ensure the formation of efficient charge channels, yet increasing ionic liquid content delivers diminishing returns. The ionogels are then used in I-TENGs to harvest water droplet energy and the performance is correlated to the ionogels structure-property relationships. Improvement of the energy harvesting is further explored by the introduction of surface polymer brushes on I-TENGs via a facile and universal method, which enhances droplet sliding by means of ideal surface contact angle hysteresis and improves its anti-reflective properties by employing the I-TENG as a surface covering for solar cells.

Flexible All-Inorganic Perovskite Photodetector with a Combined Soft-Hard Layer Produced by Ligand Cross-Linking

Although perovskite nanocrystals have attracted considerable interests as emerging semiconductors in optoelectronic devices, design and fabrication of a deformable structure with high stability and flexibility while meeting the charge transport requirements remain a huge challenge. Herein, a combined soft-hard strategy is demonstrated to fabricate intrinsically flexible all-inorganic perovskite layers for photodetection via ligand cross-linking. Perfluorodecyltrichlorosilane (FDTS) is employed as the capping ligand and passivating agent bound to the CsPbBr₃ surface via Pb-F and Br-F interactions. The SiCl head groups of FDTS are hydrolyzed to produce SiOH groups which subsequently condense to form the SiOSi network. The CsPbBr₃ @FDTS nanocrystals (NCs) are monodispersed cubes with an average particle size of 13.03 nm and exhibit excellent optical stability. Furthermore, the residual hydroxyl groups on the surface of the CsPbBr₃ @FDTS render the NCs tightly packed and cross-linked to each other to form a dense and elastic CsPbBr₃ @FDTS film with soft and hard components. The photodetector based on the flexible CsPbBr₃ @FDTS film exhibits outstanding mechanical flexibility and robust stability after 5000 bending cycles.

Blood-Glucose-Depleting Hydrogel Dressing as an Activatable Photothermal/Chemodynamic Antibacterial Agent for Healing Diabetic Wounds

Poorly healing and nonhealing diabetic wounds are challenging to treat as the rapid growth of bacteria due to the high local glucose content can lead to persistent inflammation and poor angiogenesis. Herein, a smart hydrogel dressing composed of 3,3',5,5'-tetramethylbenzidine/ferrous ion/Pluronic F-127/glucose oxidase (TMB/Fe²⁺/PF127/GOx) is designed and demonstrated to consume blood glucose while accelerating wound healing by generating antibacterial agents in situ. The loaded GOx degrades blood glucose to provide hydrogen peroxide (H₂O₂) and gluconic acid to support the Fe²⁺-based Fenton reaction, and the generated hydroxyl radical (·OH) facilitates the oxidation of TMB. The color change from colorless to green caused by the oxidation of TMB in the blood glucose range between 1 and 10 mM can be monitored visually. Simultaneously, this process induced chemodynamic therapy (CDT) by the specific generation of hydroxyl radical (·OH) for killing bacteria. Moreover, the oxidized TMB shows strong absorption in the near infrared (NIR) region so that NIR light can be converted into heat efficiently for photothermal therapy (PTT). As a result, nearly 100% of Staphylococcus aureus and Escherichia coli are killed by synergistic PTT/CDT, and the infected skin wounds undergo complete repair along with downregulation of interleukin-6 (IL-6) and upregulation of the vascular endothelial growth factor (VEGF) and matrix metallopeptidase-2 (MMP-2). Different from traditional wound dressings that can give rise to secondary injury, the excellent thermosensitive properties arising from the sol/gel phase transition render the hydrogel dressing materials injectable, self-reparable, and removable on demand. The multifunctional hydrogel with hypoglycemic, chemodynamic, photothermal, antibacterial, and on-demand thermosensitive properties has immense potential in the treatment of diabetic wounds.

Correction: Tuning the arrangement of lamellar nanostructures: achieving the dual function of physically killing bacteria and promoting osteogenesis

Correction for 'Tuning the arrangement of lamellar nanostructures: achieving the dual function of physically killing bacteria and promoting osteogenesis' by Shi Mo et al., Mater. Horiz., 2023, 10, 881-888, https://doi.org/10.1039/d2mh01147f.

Quantifiable Relationship Between Antibacterial Efficacy and Electro-Mechanical Intervention on Nanowire Arrays

Physical disruption is an important antibacterial means as it is lethal to bacteria without spurring antimicrobial resistance. However, it is very challenging to establish a quantifiable relationship between antibacterial efficacy and physical interactions such as mechanical and electrical forces. Herein, titanium nitride (TN) nanowires with adjustable orientations and capacitances are prepared to exert gradient electro-mechanical forces on bacteria. While vertical nanowires show the strongest mechanical force resulting in an antibacterial efficiency of 0.62 log reduction (vs 0.22 for tiled and 0.36 for inclined nanowires, respectively), the addition of electrical charges maximizes the electro-mechanical interactions and elevates the antibacterial efficacy to more than 3 log reduction. Biophysical and biochemical analyses indicate that electrostatic attraction by electrical charge narrows the interface. The electro-mechanical intervention more easily stiffens and rips the bacteria membrane, disturbing the electron balance and generating intracellular oxidative stress. The antibacterial ability is maintained in vivo and bacteria-challenged rats are protected from serious infection. The physical bacteria-killing process demonstrated here can be controlled by adjusting the electro-mechanical interactions. Overall, these results revealed important principles for rationally designing high-performance antibacterial interfaces for clinical applications.

Dose-Dependent Effects in Plasma Oncotherapy: Critical In Vivo Immune Responses Missed by In Vitro Studies

Cold atmospheric plasma (CAP) generates abundant reactive oxygen and nitrogen species (ROS and RNS, respectively) which can induce apoptosis, necrosis, and other biological responses in tumor cells. However, the frequently observed different biological responses to in vitro and in vivo CAP treatments remain poorly understood. Here, we reveal and explain plasma-generated ROS/RNS doses and immune system-related responses in a focused case study of the interactions of CAP with colon cancer cells in vitro and with the corresponding tumor in vivo. Plasma controls the biological activities of MC38 murine colon cancer cells and the involved tumor-infiltrating lymphocytes (TILs). In vitro CAP treatment causes necrosis and apoptosis in MC38 cells, which is dependent on the generated doses of intracellular and extracellular ROS/RNS. However, in vivo CAP treatment for 14 days decreases the proportion and number of tumor-infiltrating CD8+T cells while increasing PD-L1 and PD-1 expression in the tumors and the TILs, which promotes tumor growth in the studied C57BL/6 mice. Furthermore, the ROS/RNS levels in the tumor interstitial fluid of the CAP-treated mice are significantly lower than those in the MC38 cell culture supernatant. The results indicate that low doses of ROS/RNS derived from in vivo CAP treatment may activate the PD-1/PD-L1 signaling pathway in the tumor microenvironment and lead to the undesired tumor immune escape. Collectively, these results suggest the crucial role of the effect of doses of plasma-generated ROS and RNS, which are generally different in in vitro and in vivo treatments, and also suggest that appropriate dose adjustments are required upon translation to real-world plasma oncotherapy.

Mixed Ion/Electron Conductive Li3N-Mo Interphase Enabling Stable and Ultrahigh-Rate Lithium Metal Anodes

Lithium (Li) metal is a promising anode for high-energy-density batteries; however, its practical viability is hampered by the unstable metal Li-electrolyte interface and Li dendrite growth. Herein, a mixed ion/electron conductive Li₃N-Mo protective interphase with high mechanical stability is designed and demonstrated to stabilize the Li-electrolyte interface for a dendrite-free and ultrahigh-current-density metallic Li anode. The Li₃N-Mo interphase is simultaneously formed and homogeneously distributed on the Li metal surface by the surface reaction between molten Li and MoN nanosheets powder. The highly ion-conductive Li₃N and abundant Li₃N/Mo grain boundaries facilitate fast Li-ion diffusion, while the electrochemically inert metal Mo cluster in the mosaic structure of Li₃N-Mo inhibits the long-range crystallinity and regulates the Li-ion flux, further promoting the rate capability of the Li anode. The Li₃N-Mo/Li electrode has a stable Li-electrolyte interface as manifested by a low Li overpotential of 12 mV and outstanding plating/stripping cyclability for over 3200 h at 1 mA cm^-2. Moreover, the Li₃N-Mo/Li anode inhibits Li dendrite formation and exhibits a long cycling life of 840 h even at 30 mA cm^-2. The full cell assembled with LiFePO₄ cathode exhibits stable cycling performance with 87.9% capacity retention for 200 cycles at 1C (1C = 170 mA g^-1) as well as high rate capability of 83.7 mAh g^-1 at 3C. The concept of constructing a mixed ion/electron conductive interphase to stabilize the Li-electrolyte interface for high-rate and dendrite-free Li metal anodes offers a viable strategy to develop high-performance Li-metal batteries.