Rational Design of PDI-Based Linear Conjugated Polymers for Highly Effective and Long-Term Photocatalytic Oxygen Evolution

"Self-Catalysis" Acceleration of Carrier Transport in One-Dimensional Covalent Organic Frameworks with Mortise-Tenon Stacking

Covalent Organic Frameworks (COFs) are promising in the field of photonic energy conversion. However, most efforts have been concentrated on the design of ligand geometric structures and chemical bonding relationships, while understanding the impact of stacking methods on photonic energy conversion remains a significant challenge. In this work, four COFs (1D-COF, 1D-MeCOF, 1D-tBuCOF and 2D-COF) with the same main-chain structure but different stacking methods are designed and synthesized, using photocatalytic hydrogen evolution as a model reaction. Mortise-tenon stacked 1D-MeCOF exhibits far superior photocatalytic hydrogen evolution performance to other stacking methods, and it maintains high efficiency and stability in natural seawater systems. Extensive characterization demonstrates that such a unique mortise-tenon stacking structure of 1D-MeCOF inhibits interchain slippage, enhances π-stacking, and maximizing light absorption capabilities. Furthermore, unidirectional carrier transport characteristics of one-dimensional structure can generate a strong photo-induced self-built electric field, which acts as "self-catalysis" to accelerate carrier transport. This work provides an effective design strategy and mechanistic insights on the stacking engineering of photonic energy conversion materials.

Harmonizing proton sponge and proton reservoir in conjugated microporous polymers for enhanced photocatalytic hydrogen peroxide production

Photocatalytic technology is highly sought-after for H2O2 production; however, the low selectivity between the oxygen reduction reaction (ORR) and water oxidation reaction (WOR) pathways is the primary factor limiting photocatalytic performance. Herein, a strategy that simulates a proton sponge by integrating aliphatic tertiary amines into conjugated microporous polymers (CMPs) to synthesize PPDI-N is reported. This method uses a carboxylic acid contaminant (2,4-dichlorophenoxyacetic acid, 2,4-D) as the proton reservoir to synergistically expedite the photosynthesis of H2O2 via a selective one-step 2e- ORR. Importantly, with the aid of 2,4-D (acting as both a proton supplier and hole scavenger), the H2O2 production rate of PPDI-N is 4.4-fold higher than that in pure water, reaching 8.15 mmol g-1 within 4 h irradiation time, which is 58.2 times greater at the same pH value. By mimicking a photo Fenton-like process with the assistance of Fe2+, PPDI-N exhibits an unprecedented removal efficiency (>99%) for 300 ppm of 2,4-D within 60 min. As revealed by Kelvin probe force microscopy and electric surface potential calculations, an enhanced built-in electric field was established in PPDI-N. This work provides valuable guidance for advancing CMP photocatalysts and establishes an ideal scenario for enabling simultaneous photocatalytic mineralization of organic contaminants and H2O2 production.

Ground-state charge transfer in single-molecule junctions covalent organic frameworks for boosting photocatalytic hydrogen evolution

Ground-state charge transfer plays a vital role in improving the photocatalytic performance of D-A type covalent organic frameworks. However, limited studies have explored the modulation of photocatalytic performance in COFs-based photocatalysts through ground-state charge transfer. Here we show the formation of extremely intense ground-state charge transfer via a unique covalent bonding approach. We transform three-dimensional stacked COF-based S-scheme heterojunctions (FOOCOF-PDIU) into co-planar single-molecule junctions (FOOCOF-PDI). This co-planar single-molecule junction structure exhibits strong ground-state charge transfer compared to the traditional randomly stacked heterojunctions and individual COFs. Ground-state charge transfer induces charge redistribution and dipole moment formation, which enhances the built-in electric field intensity in single-molecule junctions. This enhanced built-in electric field promotes exciton dissociation and charge separation, resulting in improved photocatalytic efficiency. Therefore, a stable molecule-decorated COF with broad light absorption has been successfully obtained, whose hydrogen evolution rate can reach 265 mmol g-1 h-1. This work opens an avenue for exploiting photocatalytic mechanisms in COFs based on ground-state charge transfer effects.

Influence of π-π interactions on organic photocatalytic materials and their performance

Currently, organic photocatalyst-based photocatalysis has garnered significant attention as an environmentally friendly and sustainable reaction system due to the preferable structural flexibility and adjustable optoelectronic features of organic photocatalysts. In addition, π-π interactions, as one of the common non-bonded interactions, play an important role in the structure and property adjustments of organic photocatalysts due to their unique advantages in modulating the electronic structure, facilitating charge migration, and influencing interfacial reactions. However, studies summarizing the relationship between the π-π interactions of organic photocatalysts and their photocatalytic performance are still rare. Therefore, in this review, we introduced the types of π-π interactions, characterization techniques, and different types of organic photocatalytic materials. Then, the influence of π-π interactions on photocatalysis and the modification strategies of π-π interactions were summarized. Finally, we discussed their influence on photocatalytic performance in different photocatalytic systems and analyzed the challenges and prospects associated with harnessing π-π interactions in photocatalysis. The review provides a clear map for understanding π-π interaction formation mechanism and its application in organic photocatalysts, offering useful guidance for researchers in this field.

Covalent Organic Frameworks with Tunable Bridge Positions for Photocatalytic CO2 Reduction to Propylene Under Visible Light Illumination

The use of sunlight to convert CO2 into multi-carbon fuels, particularly propylene, is considered a sustainable carbon cycle pathway, but propylene requires a multi-electron-coupled proton reaction process that has not been reported. Herein, two covalent organic frameworks (DA-COF and DP-COF) are prepared by varying the bridging positions of anthraquinone conjugated units. The experimental results show that the neighbouring bridge in DA-COF forms a unique cleavage structure like an enzyme catalyst, which can provide an efficient microenvironment for the reduction reaction to trap protons. At the same time, the neighbor bridging in DA-COF can form an electron donor-electron acceptor structure to accelerate the photogenerated carrier migration. As a result, DA-COF exhibits excellent visible light propylene production with a yield of 270.54 µmol g-1 and no C₃H₆ product is detected by the DP-COF during the reduction process. This study presents a novel avenue for the production of high value-added multi-carbon products using photocatalysis.

MIL-125-PDI/ZnIn2S4 Inorganic-Organic S-Scheme Heterojunction With Hierarchical Hollow Nanodisc Structure for Efficient Hydrogen Evolution from Antibiotic Wastewater Remediation

Efficient photocatalytic production of H2 from wastewater is expected to address environmental pollution and energy crises effectively. However, the rapid recombination of photoinduced carriers results in low photoconversion efficiency. At present, inorganic-organic S-scheme heterojunction have become a prominent and promising technology. In this study, an organic ligand modified MIL-125-PDI/ZnIn2S4 (ZIS) inorganic-organic S-scheme heterojunction catalyst is designed. ZIS nanosheets are grown on the disc-shaped MIL-125-PDI surface to form a distinctive hollow nanodiscs with hierarchical structure, giving the material an abundance of surface active sites, an optimized electronic structure, and a spatially separated redox surface. Consequently, the optimal 100MIL-125-PDI250/ZIS exhibited high photocatalytic HER of 508.99 µmol g-1 h-1 in Tetracycline hydrochloride (TC-HCl) solution. Meanwhile, the catalyst achieved complete TC-HCl removal and mineralization rate of 66.62% in 4 h. Experimental and theoretical calculations corroborate that the staggered band alignment and work function difference between MIL-125-PDI and ZIS induce the formation of a built-in electric field, thus regulating the charge transfer routes and consequently enhancing charge separation efficiency. The possible photocatalytic mechanism is analyzed using liquid chromatography-mass spectrometry (LC-MS), and the toxicities of the degradation products are also evaluated. This work presents a green dual-function strategy for H2 production and antibiotic wastewater recycling.

Construction of Covalent Triazine Frameworks with Electronic Donor-Acceptor System for Efficient Photocatalytic C-H Hydroxylation of Imidazole[1,2-α]Pyridine Derivatives

Covalent triazine frameworks (CTFs) are promising heterogeneous photocatalyst candidates owing to their excellent stability, conjugacy, and tunability. In this study, a series of CTFs decorated with different substituents (H, MeO, and F) were synthesised and utilised as photocatalysts for C-H activation reactions. The corresponding optoelectronic properties could be precisely regulated by the electronic effects of different substituents in the nanopore channels of the CTFs; these CTFs were effective photocatalysts for C-H activation in organic synthesis due to their unique structures and optoelectronic properties. Methoxy-substituted CTF (MeO-CTF) exhibited extraordinary catalytic performance and reusability in C-H functionalization by constructing an electronic donor-acceptor system, achieving the highest yield in the photocatalytic C3-H hydroxylation of 2-phenylimidazole[1,2-α]pyridine. This strategy provides a new scaffold for the rational design of CTFs as efficient photocatalysts for organic synthesis.

Influence of Configurational Isomerism of Pyridine π Bridge in Donor-π Bridge-Acceptor Type Covalent Triazine Frameworks on The Photocatalytic Performance

Covalent triazine frameworks (CTFs) involving a donor-π bridge-acceptor (D-π-A) structure are considered one of the most promising photocatalytic materials, in which the π bridge is known to play an important role in influencing the photocatalytic performance. So far, much effort has been directed at the designing of the different π bridge structure to facilitate the photo-induced charge separation. However, the orientation of the π bridge units (configurational isomerism) has not been considered. In this paper, a pair of pyridine-bridged D-π-A type CTFs, named TFA-P1-CTF and TFA-P2-CTF, were designed to investigate how the orientation of the π bridge would influence their performance in the photocatalytic oxidation of olefins into carbonyl compounds. Interestingly, due to the superior charge separation capability, TFA-P2-CTF was found to be able to catalyze the reaction more efficiently than TFA-P1-CTF. Our study eventually provided a guide for the design of D-π-A type CTFs as high-performance photocatalytic materials via tuning the configurational isomerism of the π bridge unit for use in chemical transformations.

Local weak hydrogen bonds induced dipole-dipole interactions in polymer for enhancing photocatalytic oxidation

Functionalizing organic polymers is an effective strategy for enhancing their photocatalytic performance. However, this approach is currently limited by specific motifs, complex preparation methods, and an unclear electron transfer mechanism. Here, we present a meticulously designed structure of perylene diimide connected with poly (barbituric acid trimer) through self-assembled hydrogen bonding. In particular, the local chemical environment of the two components is adjusted by hydrogen bond-induced dipole-dipole interactions, leading to the emergence of a significant inherent electric field. Additionally, the formation of hydrogen bonds provides electronic pathways that facilitate charge transfer from perylene to adjacent units. Moreover, the distinctive electronic structure enhances polarity transfer and improves activation and adsorption capabilities for reactive molecules. Ultimately, B-PDI exhibits outstanding oxidation rates for benzylamine to N-benzylidene-benzylamine (10.03 mmol g-1h-1) and selectivity (>99.99 %). Our work offers a widely popular approach for enhancing the photocatalytic activity of organic semiconductor materials by constructing hydrogen bonds in heterogeneous molecules.

Organic Photovoltaic Materials for Solar Fuel Applications: A Perfect Match?

This work discusses the use of donor and acceptor materials from organic photovoltaics in solar fuel applications. These two routes to solar energy conversion have many shared materials design parameters, and in recent years there has been increasing overlap of the molecules and polymers used in each. Here, we examine whether this is a good approach, where knowledge can be translated, and where further consideration to molecular design is required.

Schottky Junction and D-A1 -A2 System Dual Regulation of Covalent Triazine Frameworks for Highly Efficient CO2 Photoreduction

Covalent triazine frameworks (CTFs) are emerging as a promising molecular platform for photocatalysis. Nevertheless, the construction of highly effective charge transfer pathways in CTFs for oriented delivery of photoexcited electrons to enhance photocatalytic performance remains highly challenging. Herein, a molecular engineering strategy is presented to achieve highly efficient charge separation and transport in both the lateral and vertical directions for solar-to-formate conversion. Specifically, a large π-delocalized and π-stacked Schottky junction (Ru-Th-CTF/RGO) that synergistically knits a rebuilt extended π-delocalized network of the D-A1 -A2 system (multiple donor or acceptor units, Ru-Th-CTF) with reduced graphene oxide (RGO) is developed. It is verified that the single-site Ru units in Ru-Th-CTF/RGO act as effective secondary electron acceptors in the lateral direction for multistage charge separation/transport. Simultaneously, the π-stacked and covalently bonded graphene is regarded as a hole extraction layer, accelerating the separation/transport of the photogenerated charges in the vertical direction over the Ru-Th-CTF/RGO Schottky junction with full use of photogenerated electrons for the reduction reaction. Thus, the obtained photocatalyst has an excellent CO2 -to-formate conversion rate (≈11050 µmol g-1 h-1 ) and selectivity (≈99%), producing a state-of-the-art catalyst for the heterogeneous conversion of CO2 to formate without an extra photosensitizer.

Rational Design of Conjugated Acetylenic Polymers Enables a Two-Electron Water Oxidation Pathway for Enhanced Photosynthetic Hydrogen Peroxide Generation

Herein, the design of conjugated acetylenic polymers (CAPs) featuring diverse spatial arrangements and intramolecular spacers of diacetylene moieties (─C≡C─C≡C─) for photocatalytic hydrogen peroxide (H2 O2 ) production from water and O2 , without the need for sacrificial agents, is presented. It is shown that the linear configuration of diacetylene moieties within conjugated acetylenic polymers (CAPs) induces a pronounced polarization of electron distribution, which imparts enhanced charge-carrier mobility when compared to CAPs' networks featuring cross-linked arrangements. Moreover, optimizing the intramolecular spacer between diacetylene moieties within the linear structure leads to the exceptional modulation of the band structures, specifically resulting in a downshifted valence band (VB) and rendering the two-electron water oxidation pathway thermodynamically feasible for H2 O2 production. Consequently, the optimized CAPs with a linear configuration (LCAP-2), featuring spatially separated reduction centers (benzene rings) and oxidation centers (diacetylene moieties), exhibit a remarkable H2 O2 yield rate of 920.1 µmol g-1 h-1 , superior than that of the linear LCAP-1 (593.2 µmol g-1 h-1 ) and the cross-linked CCAP (433.4 µmol g-1 h-1 ). The apparent quantum efficiency (AQE) and solar-to-chemical energy conversion (SCC) efficiency of LCAP-2 are calculated to be 9.1% (λ = 420 nm) and 0.59%, respectively, surpassing the performance of most previously reported conjugated polymers.

Exploring the Electronic, Optical, and Charge Transfer Properties of A-D-A-Type IDTV-ThIC-Based Molecules To Enhance Photovoltaic Performance of Organic Solar Cells

Improving the charge mobility and optoelectronic properties of indacenodithiophene-based small molecule acceptors is a key challenge to improving overall efficiency. In this current research, seven newly designed molecules (DT1-DT7) comprising the indacenodithiophene-based core are presented to tune energy levels, enhance charge mobility, and improve the photovoltaic performance of IDTV-ThIC molecules via density functional theory. All the molecules were designed by end-capped modification by substituting terminal acceptors of IDTV-ThIC with strong electron-withdrawing moieties. Among all the examined structures, DT1 has proved itself a superior molecule in multiple aspects, including higher λmax in chloroform (787 nm) and gaseous phase (727 nm), narrow band gap (2.16 eV), higher electron affinity (3.31 eV), least excitation energy (1.57 eV), and improved charge mobility due to low reorganization energy and higher excited state lifetime (2.37 ns) when compared to the reference (IDTV-ThIC) and other molecules. DT5 also showed remarkable improvement in different parameters, such as the lowest exciton binding energy (0.41 eV), leading to easier charge moveability. The improved open-circuit voltage of DT4 and DT5 makes them proficient molecules exhibiting the charge transfer phenomenon. The enlightened outcomes of these molecules can pave a new route to develop efficient organic solar cell devices using these molecules, especially DT1, DT4, and DT5.

Realizing Photocatalytic Overall Water Splitting by Modulating the Thickness-Induced Reaction Energy Barrier of Fluorenone-Based Covalent Organic Frameworks

Direct photocatalytic hydrogen and oxygen evolution from water splitting is an attractive approach for producing chemical fuels. In this work, a novel fluorenone-based covalent organic framework (COF-SCAU-2) is successfully exfoliated into ultrathin three-layer nanosheets (UCOF-SCAU-2) for photocatalytic overall water splitting (OWS) under visible light. The ultrathin structures of UCOF-SCAU-2 greatly enhance carrier separation, utilization efficiency, and the exposure of active surface sites. Surprisingly, UCOF-SCAU-2 exhibits efficient photocatalytic OWS performance, with hydrogen and oxygen evolution rates reaching 0.046 and 0.021 mmol h-1 g-1 , respectively, under visible-light irradiation, whereas bulk COF-SCAU-2 shows no activity for photocatalytic OWS. Charge-carrier kinetic analysis and DFT calculations confirm that reducing the thickness of the COF nanosheets increases the number of accessible active sites, reduces the distance for charge migration, prolongs the lifetimes of photogenerated carriers, and decreases the Gibbs free energy of the rate-limiting step compared to nonexfoliated COFs. This work offers new insights into the effect of the layer thickness of COFs on photocatalytic OWS.