Halide Perovskites and Their Derivatives for Efficient, High-Resolution Direct Radiation Detection: Design Strategies and Applications

Green Fabrication of Sulfonium-Containing Bismuth Materials for High-Sensitivity X-Ray Detection

Organic-inorganic hybrid materials based on lead and bismuth have recently been proposed as novel X- and gamma-ray detectors for medical imaging, non-destructive testing, and security, due to their high atomic numbers and facile preparation compared to traditional materials like amorphous selenium and Cd(Zn)Te. However, challenges related to device operation, excessively high dark currents, and long-term stability have delayed commercialization. Here, two novel semiconductors incorporating stable sulfonium cations are presented, [(CH3CH2)3S]6Bi8I30 and [(CH3CH2)3S]AgBiI5, synthesized via solvent-free ball milling and fabricated into dense polycrystalline pellets using cold isostatic compression, two techniques that can easily be upscaled, for X-ray detection application. The fabricated detectors exhibit exceptional sensitivities (14 100-15 190 µC Gyair -1 cm-2) and low detection limits (90 nGyair s-1 for [(CH3CH2)3S]6Bi8I30 and 78 nGyair s-1 for [(CH3CH2)3S]AgBiI5), far surpassing current commercial detectors. Notably, they maintain performance after 9 months of ambient storage. The findings highlight [(CH3CH2)3S]6Bi8I30 and [(CH3CH2)3S]AgBiI5 as scalable, cost-effective and highly stable alternatives to traditional semiconductor materials, offering great potential as X-ray detectors in medical and security applications.

A high-performance X-ray detector based on large-size perovskite MAPbI3 single crystals grown by environmentally friendly solvents and advanced systems

In this paper, we report a novel hermetically sealed and precisely temperature-controlled growth system that grows MAPbI3 single crystals up to a size of 60 × 48 × 22 mm3. The grown crystals have lower defects and higher quality. It is expected to facilitate the commercialization of perovskite single crystals for optoelectronic applications.

Halide perovskites, a game changer for future medical imaging technology

The accurate detection of x-rays enables broad applications in various fields, including medical radiography, safety and security screening, and nondestructive inspection. Medical imaging procedures require the x-ray detection devices operating with low doses and high efficiency to reduce radiation health risks, as well as expect the flexible or wearable ones that offer more comfortable and accurate diagnosis experiences. Recently, halide perovskites have shown promising potential in high-performance, cost-effective x-ray detection owing to their attractive features, such as strong x-ray absorption, high-mobility-lifetime product, tunable bandgap, fast response, as well as low-cost raw materials, facile processing, and excellent flexibility. In this review, we comprehensively summarize the recent advances in halide perovskite x-ray detectors and imaging, focusing on their application potential in medical imaging technology. We highlight the recent demonstrations and optimizations of halide perovskite x-ray detectors and imaging and their application in medical radiography. Finally, we conclude by pointing out the challenges of perovskite x-ray detection devices for the clinical practical applications and by sharing our perspectives on the potential solutions for driving the field forward.

Aggregation-Induced Emissive Scintillators: A New Frontier for Radiation Detection and Imaging

Aggregation-induced emission (AIE) is a unique phenomenon where certain organic materials exhibit enhanced luminescence in their aggregated states, overcoming the typical quenching observed in conventional organic materials. Since its discovery in 2001, AIE has driven significant advances in fields like OLEDs and biological imaging, earning recognition in fundamental research. However, its application in high-energy radiation detection remains underexplored. Organic scintillators, though widely used, face challenges such as low light yield and poor radiation attenuation. AIE materials offer promising solutions by improving light yield, response speed, and radiation attenuation. This review summarizes the design strategies behind AIE scintillators and their very recent applications in X-ray, γ-ray, and fast neutron detection. We highlight their advantages in enhancing detection sensitivity, reducing background noise, and achieving high-resolution imaging. By addressing the current challenges, we believe AIE materials will play a pivotal role in advancing future radiation detection and imaging technologies.

Interface Energy-Level Reorganization for Efficient Perovskite γ-Ray Detectors

Metal halide perovskites are promising candidates for gamma-ray (γ-ray) spectrum detectors. However, achieving high-resolution energy spectra in single-photon pulse-height analysis mode remains challenging, due to the inevitable leakage currents degrade the recognizable fingerprint energies which is critical for resolving γ-ray spectroscopy. We demonstrate under high bias voltage, a deficient contact barrier can lead to excessive surface charge injection, thereby increasing leakage current from electrodes to perovskites. Hence, we conceive to employ surface ligand engineering on perovskite single crystals to manipulate energy levels to suppress leakage current. In particular, anchoring a strong dipole ligand onto the perovskite induced surface charge-density displacement, leading to a downward band bending and heightened the corresponding contact barrier. Consequently, the strategy minimized the detectors' leakage current by an order of magnitude, to as low as 44 nA cm-2 at -100 V. The resulting detectors show a significant improvement in energy resolution, 3.9 % for 22Na 511 keV γ-rays has been achieved at room temperature. The resulting detector further resolves each fingerprint energy for 152Eu γ-spectrum, representing one of the best γ-rays perovskite detectors reported to date. Moreover, the detectors exhibited stabilized energy resolution without any degradation under a continuous electric field (1,000 V cm-1) for over 300 minutes, representing the longest longevity reported to date.

Chiral-Polar Alternating Cation Intercalation-Type Perovskite Enables Sensitive Self-Driven X-ray Detection with an Ultralow Detection Limit

Metal halide perovskites (MHPs) have shown great potential for direct X-ray detection, but achieving high sensitivity without external bias remains challenging. Chiral-polar alternating cation intercalation (ACI)-type MHPs, with excellent optoelectronic properties and a robust chirality-induced bulk photovoltaic effect (BPVE), offer a promising platform for self-driven X-ray detection. Herein, impressive self-driven X-ray detection performance was achieved by utilizing chiral-polar 2D ACI-type perovskite single crystals of (R-PPA)PAPbBr4 (1R; R-PPA = R-1-phenylpropylamine; PA = propylamine). The chiral R-PPA cations induce the crystallization of 1R in the chiral-polar space group P21, wherein its spontaneous electric polarization further induces a strong BPVE. Consequently, 1R shows remarkable radiation photovoltaics of 0.75 V, which endows its excellent self-driven X-ray detection with a high sensitivity of 417.2 μC Gy-1 cm-2 and a low detection limit of 24.1 nGy s-1, meeting the state-of-the-art level by leveraging its intrinsic photovoltaic effect. These findings highlight the huge potential of chiral-polar ACI-type MHPs in self-driven X-ray detection applications.

Origin of anisotropic thermal transport in CsPbBr3

We reveal the specific structural and bonding features that result in anisotropic thermal transport for CsPbBr3 by directional single-crystal measurements and elucidate the bases for the low Debye temperature and speed of sound. This work enhances the research on perovskites and reveals the structural features governing the thermal properties.

Pyro-phototronic Effect Enhanced Self-Powered Photoresponse in Lead-Free Hybrid Perovskite

Pyro-phototronic effect (PPE) can significantly boost the performance of hybrid perovskite (HPs) photodetectors due to the effective modulation of photogenerated charge carrier separations, transportation, and extraction. However, there are few reports on the application of PPE in lead-free HPs. Herein, a polar lead-free HP (1,3-BMACH)BiBr5 [1,3-BMACH = 1,3-bis(aminomethyl)cyclohexane] is synthesized and realized broadband self-powered photoresponse from X-rays to near-infrared (NIR) through the PPE. Particularly, this light-induced PPE in lead-free HPs breaks the limitation of the optical band gap, making them suitable for broadband self-powered photodetection. Under 405 nm illumination, compared with a purely photovoltaic system, Iphoto+pyro is boosted by 3100%, and R and D* are both enhanced by 260% after coupled PPE. It is particularly interesting that an obvious X-ray-induced PPE phenomenon is also observed, which endows (1,3-BMACH)BiBr5 with a high sensitivity of 154 μC Gy-1 cm-2 and a low detection limit of 307 nGy s-1 under the self-powered mode. The implementation of light-induced PPE from X-rays to NIR in lead-free HPs provides a new approach for constructing environmentally friendly, broadband, and self-powered optoelectronic devices in the future.

Single Crystal Ruddlesden-Popper and Dion-Jacobson Metal Halide Perovskites for Visible Light Photodetectors: Present Status and Future Perspectives

2D metal halide perovskites (MHPs), mainly the studied Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phases, have gained enormous popularity as optoelectronic materials owing to their self-assembled multiple quantum well structures, tunable semiconducting properties, and improved structural stability compared to their bulk 3D counterparts. The performance of polycrystalline thin film devices is limited due to the formation of defects and trap states. However, as studied so far, single crystal-based devices can provide a better platform to improve device performance and investigate their fundamental properties more reliably. This Review provides the first comprehensive report on the emerging field of RP and DJ perovskite single crystals and their use in visible light photodetectors of varied device configurations. This Review structurally summarizes the 2D MHP single crystal growth methods and the parameters that control the crystal growth process. In addition, the characterization techniques used to investigate their crystal properties are discussed. The review further provides detailed insights into the working mechanisms as well as the operational performance of 2D MHP single crystal photodetector devices. In the end, to outline the present status and future directions, this Review provides a forward-looking perspective concerning the technical challenges and bottlenecks associated with the developing field of RP and DJ perovskite single crystals. Therefore, this timely review will provide a detailed overview of the fast-growing field of 2D MHP single crystal-based photodetectors as well as ignite new concepts for a wide range of applications including solar cells, photocatalysts, solar H2 production, neuromorphic bioelectronics, memory devices, etc.

Recent strategies for triplet-state emission regulation toward non-lead organic-inorganic metal halides

Organic-inorganic metal halides (OIMHs) have strengthened the development of triplet-state emission materials due to their excellent luminescence performance. Due to the inherent toxicity of lead (Pb) significantly limiting its further advancement, numerous studies have been conducted to regulate triplet-state emission of non-Pb OIMHs, and several feasible strategies have been proposed. However, most of the non-Pb OIMHs reported have a relatively short lifetime or a low luminescence efficiency, not in favor of their application. In this review, we provide a summary of recent reports on the regulation of triplet-state emissions in non-Pb OIMHs to provide benefits for the design of innovative luminescent materials. Our focus is primarily on exploring the internal and external factors that influence the triplet-state emission. Starting from the luminescence mechanism, the current strategies for regulating triplet-state emissions are summarized. Moreover, by manipulating these strategies, it becomes feasible to achieve triplet-state emissions that span a range of colors from blue to red, and even extend into the near-infrared spectrum with high luminescence efficiency, while also increasing their lifetimes. This review not only provides fresh insights into the advancement of triplet-state emissions in OIMHs but also integrates experimental and theoretical perspectives to illuminate the trajectory of future research endeavors.

Arising 2D Perovskites for Ionizing Radiation Detection

2D perovskites have greatly improved moisture stability owing to the large organic cations embedded in the inorganic octahedral structure, which also suppresses the ions migration and reduces the dark current. The suppression of ions migration by 2D perovskites effectively suppresses excessive device noise and baseline drift and shows excellent potential in the direct X-ray detection field. In addition, 2D perovskites have gradually emerged with many unique properties, such as anisotropy, tunable bandgap, high photoluminescence quantum yield, and wide range exciton binding energy, which continuously promote the development of 2D perovskites in ionizing radiation detection. This review aims to systematically summarize the advances and progress of 2D halide perovskite semiconductor and scintillator ionizing radiation detectors, including reported alpha (α) particle, beta (β) particle, neutron, X-ray, and gamma (γ) ray detection. The unique structural features of 2D perovskites and their advantages in X-ray detection are discussed. Development directions are also proposed to overcome the limitations of 2D halide perovskite radiation detectors.

Research on the Technological Progress of CZT Array Detectors

CdZnTe (CZT) is a new type of compound semiconductor that has emerged in recent years. Compared to other semiconductor materials, it possesses an ideal bandgap, high density, and high electron mobility, rendering it an excellent room-temperature composite semiconductor material for X-ray and γ-ray detectors. Due to the exceptional performance of CZT material, detectors manufactured using it exhibit high energy resolution, spatial resolution, and detection efficiency. They also have the advantage of operating at room temperature. CZT array detectors, furthermore, demonstrate outstanding spatial detection and three-dimensional imaging capabilities. Researchers worldwide have conducted extensive studies on this subject. This paper, building upon this foundation, provides a comprehensive analysis of CZT crystals and CZT array detectors and summarizes existing research to offer valuable insights for envisioning new detector methodologies.