The Key Role of Molecular Packing in Luminescence Property: From Adjacent Molecules to Molecular Aggregates

Unprecedented stacking-dependent piezoluminescence enhancement in atomically precise superatomic gold nanoclusters

Deciphering the structure-property relationship between cluster stacking and high-efficiency luminescence of metal nanoclusters is crucial for designing and synthesizing high-performance light-emitting materials and devices. Here, we successfully synthesized two polymorphic gold nanoclusters (Au8-C and Au8-P) and investigated their stacking-dependent piezoluminescence based on hydrostatic pressure. Under compression, Au8-C exhibits notable piezoluminescence enhancement. However, Au8-P presents monotonic piezoluminescence quenching. High-pressure structural characterizations confirm the existence of stacking-dependent anisotropic compression in Au8-C and Au8-P. Under high pressure, the columnar-stacked Au8-C shrinks faster along the a axis, increasing the aspect ratio (AR) of the fusiform Au8 core. However, the layered Au8-P is compressed faster along the c axis, reducing the AR and leading to a flatter Au8 core. High-pressure femtosecond transient absorption, time-resolved photoluminescence, and Raman spectra collaboratively confirm that differentiated anisotropic compression notably suppresses nonradiative loss caused by low-frequency vibrations of the Au8 core, which is responsible for the piezoluminescence enhancement in Au8-C.

Boosting The Solid-State Luminescence of Phenazine Derivatives by Enhancing Intermolecular Hydrogen Bonds and π-π Interactions in Cocrystals

Six monosubstituted phenazine derivatives were designed and synthesized for constructing cocrystals to investigate their structure-property relationship. It was found that 2-substituted phenazines could form cocrystals with 2,6-dimethylphenylboronic acid (DBA). These cocrystals exhibited red-shifted and enhanced luminescence relative to their individual components, especially 2NP-DBA whose luminescence efficiency was nearly 100 times higher than that of 2NP. By analyzing the single-crystal structures of the cocrystals and their components, enhanced hydrogen bonds and π-π interactions between molecules were detected in cocrystals, which suppressed the nonradiative transition pathways. Consequently, all three cocrystals demonstrated enhanced luminescence with strong continuous π-π interactions, which differed from the previously reported luminescence enhancement resulting from the destruction of π-π interactions. An in-depth investigation of these cocrystals can not only provide a better understanding of the structure-property relationship of organic luminescent materials, but also help develop organic luminescent materials with intense solid-state luminescence and strong π-π interactions. In addition, the optical response of these cocrystals to acidic vapors has been successfully applied in anti-counterfeiting.

Leveraging Multivalent Assembly towards High-Temperature Liquid-Phase Phosphorescence

High-temperature phosphorescence (HTP) materials have attracted considerable attention owing to their expanded application prospects, whereas they still suffer from severe deactivation in polar media, limiting their reliability and utility. Here, we present an efficient multivalent assembly strategy to achieve high-temperature liquid-phase phosphorescence (HTLP). The supramolecular assembly of multivalent modules leads to extremely robust hydrogen-bonding networks, which firmly immobilize the organic phosphors and protect triplet excitons from annihilation in high-temperature polar media, resulting in excellent HTLP emission. Moreover, the photophysical properties of HTLP are significantly enhanced by boosting multivalent interactions using multitopic phosphors, demonstrating a visible afterglow of 5 s in boiling water, more than 2 s in dimethylsulfoxide at 460 K (187 °C), and a long lifetime of 70.3 ms in N-methylpyrrolidone at 476 K (203 °C). Based on their fluidity and robust HTLP emission, in situ microcracks detection of high-temperature operating instruments and spatial-time-temperature-resolved anticounterfeiting are demonstrated.

Effective Detection of Cu(II) Ions Based on Carbon Dots@Exfoliated Layered Double Hydroxides Composites Fluorescence Probe

A series of carbon dots@exfoliated layered double hydroxides (CDs@LDH) composites were hydrothermally fabricated by Mg/Al LDH and formamide. The results of FTIR, UV-vis, and XPS spectra in company with HRTEM images showed that crystalline nano CDs formed on the single layer of LDH by Mg-C bond. With the increase of solvothermal reaction time from 2 to 6 h, the band gap and the binding energy of aminic and graphitic N species of CDs@LDH composites decreased, whereas the crystallinity increased. The fluorescence peaks of CDs@LDH composites could be deconvoluted into short-wavelength (416 nm) and large-wavelength (443 nm) components by Gaussian function, and the fluorescence intensities of both components enhanced with the extension of the solvothermal reaction time. The simultaneous enhancements of fluorescence lifetime and quantum yield resulted from the relatively high electron density in graphitic nitrogen of CDs@LDH, whereas the reduction of nonradiative rate was due to the high crystallinity in the carbon core of CDs@LDH. A strong exciton-lattice interaction also has been validated based on the excitation and emission spectra of CDs@LDH, so the fluorescence emission of CDs@LDH composite was heavily related to its crystalline carbon core and nitrogen-containing groups. CDs@LDH with high nitrogen-containing exhibited a superior detection property for Cu2+ ion sensing with the linear range of 26.90 ~ 192.20 μM and a limit of detection of 0.1957 μM. The photo-induced electron transfer (PET) process dominated the fluorescence quenching of CDs@LDH by Cu2+ ion since the fluorescence lifetime decreased with the increase of Cu2+ ion concentration.

Accurately adjusted phenothiazine conformations: reversible conformation transformation at room temperature and self-recoverable stimuli-responsive phosphorescence

Conformational flexibility is essential to the stimuli-responsive property of organic materials, but achieving the reversible molecular transformation is still challenging in functional materials for the high energy barriers and restriction by intermolecular interactions. Herein, through the incorporation of various steric hindrances into phenothiazine derivatives with different positions and quantities to tune the molecular conformations by adjustable repulsive forces, the folded angles gradually changed from 180° to 90° in 17 compounds. When the angle located at 112° with moderated steric effect, dynamic and reversible transformation of conformations under mechanical force has been achieved for the low energy barriers and mutually regulated molecular motions, resulting in both self-recoverable and stimuli-responsive phosphorescence properties for the first time. It opened up a new way to realize the self-recovery property of organic materials, which can facilitate the multi-functional property of smart materials with the opened avenue for other fields with inspiration.

Multi-Dimensional Color Tunable Long Persistent Luminescence in Metal Halide-Based CPs Through Precise Manipulation of Electronic and Steric Effects

Regulating strategies for long persistent luminescence (LPL) are always in high demand. Herein, a series of coordination polymers (CPs) (SUST-Z1-Z4) are fabricated using 1,10-phenanthroline derivatives involving different substituents (─H, ─CH3, ─Cl, and ─Br) as ligands, respectively. Crystallographic data demonstrate that these CPs adopt alternating arrangements of cadmium halide chains and π-conjugated ligands. Cadmium halide chains not only bring about heavy atom effects but also introduce abundant intermolecular interactions, including halogen bonding and π-π stacking, favoring the generation of stable triplet excitons. Additionally, distinct substituents featured different electron-withdrawing abilities give rise to various spatial resistances between Phen planes, thereby resulting in diverse molecular packing modes and electronic structures. Thus, their aggregated state phosphorescence lifetimes range from 6.84 ms (SUST-Z4) to 91.10 ms (SUST-Z2), and the colors are modulated from orange to red at room temperature. SUST-Z2 presents the longest-lasting RTP and the most obvious red LPL, which is derived from the weakest electron-withdrawing capability of ─CH3 in ligands. Moreover, owing to the co-existence of single molecule and aggregated triplet excitons, these CPs also realize dynamic color-tunable LPL from green/orange to yellow/red depending on the excitation wavelength, temperature, and time-evolution. Based on quite different LPL of these CPs, multiple anti-counterfeiting methods are proposed.

Achieving Controllable Thermochromic Fluorescence via Synergistic Intramolecular Charge Transfer and Molecular Packing

Thermochromic fluorescent materials (TFMs) have attracted significant attention due to their unique fluorescent colorimetric response to temperature. However, existing TFMs still suffer from weak stimulus responsiveness, broad temperature response ranges, uncontrollable emission color changes, and low quantum yields. In this study, we address these issues by designing and synthesizing three diketone-boron complexes with distinct emission wavelengths (NWPU-(2-4)). Utilizing a molecular engineering strategy to manipulate intramolecular charge transfer transitions and molecular packing modes, our synthesized complexes exhibit efficient fluorescence emission in both solution and solid states. Moreover, their emission wavelengths are highly sensitive to environmental polarity. By incorporating these compounds into thermosensitive matrices of long-chain alkanes, we produced TFMs with varied fluorescence emission peak variation ranges. Notably, the TFM based on NWPU-4, owing to its strong charge transfer transitions and dense J-aggregate packing configuration, not only exhibits intense fluorescence emission spanning the deep red to near-infrared spectrum but also displays a remarkable 90 nm broad range of thermochromic properties. Ultimately, it was successfully applied to programmable, thermally controlled, multi-level information encryption.

Organic Materials with Ultrabright Phosphorescence at Room Temperature under Physiological Conditions for Bioimaging

In contrast to the high efficiency of room temperature phosphorescence in crystal states, the generally utilized nanoparticles of organic materials in bioimaging demonstrated sharply decreased performance by orders of magnitude under physiological conditions, badly limiting the realization of their unique advantages. This case, especially for organic red/near-infrared (NIR) phosphorescence materials, is not only the challenge present in reality but more importantly, for the theoretical problem of deeply understanding and avoiding the quenching effect by oxygen and water toward excited triplet states. Herein, thanks to the intelligent molecular design by the introduction of abundant hydrophobic chains and highly-branched structures, bright and persistent red/NIR phosphorescence under physiological conditions has been realized, which demonstrated the shielding effect towards oxygen, and the strengthened intermolecular interactions to suppress the non-radiative transitions. Accordingly, the record phosphorescence intensity of nanoparticles in bioimage, up to 8.21±0.36×108 p s-1 cm-2 sr-1, was achieved, to realize the clear phosphorescence imaging of liver and tumors in living mice, even lymph nodes in rabbit models with high SBRs. This work afforded an efficient way to achieve the bright red/NIR phosphorescence nanoparticles, guiding their further applications in biology and medicine.

Engineering Supramolecular [c2]Daisy Chains for Structural Hierarchy-Dependent Emission and Photoreactivity

Organic photofunctional materials exhibit properties that are highly dependent on their structural hierarchy. The variability in intermolecular interactions and molecular packing in both monomeric and aggregated states complicates the controllability and predictability of their photophysical and photochemical properties. To address this challenge, we developed three luminescent supramolecular [c2]daisy chains as simplified models. The rigid and mutually embedded linkers between the host and guests facilitate the formation of [c2]daisy chains with balanced stability and dynamics. Additionally, the close and tunable π-π interactions between the luminescent units provide a structural basis for fluorescence modulation and topochemical photoreactions. We performed two sets of comparisons to assess luminescence and photoreactivity: one comparison involves molecules with and without crown ethers, and the other contrasting their behavior under UV excitation in solution (diluted and concentrated) versus in the aggregated and crystalline states. Specifically, in the crystalline state, [c2]daisy chains effectively stabilize molecular packing, leading to highly efficient dimer-dependent emission. This unique structure remains in both solution (c > 1 mM) and aggregated states, which can direct the reaction pathway toward rapid and efficient intermolecular photocycloaddition upon UV irradiation. However, in highly diluted solution (10 μM), [c2]daisy chains dissociate into monomers, which further undergo intramolecular photocyclization. This study provides new insights into employing supramolecular strategies for controllable molecular aggregation and the fine-tuning of photoreaction pathways and kinetics.

Visible-light-excited organic room temperature phosphorescence

Purely organic room temperature phosphorescence (RTP) materials have evoked considerable attention owing to their fantastic optical properties and broad application prospects. However, most of the reported organic RTP materials can be only excited by UV light, leading to accelerated photoaging of organic phosphors and severe lesions of organisms under excitation. In contrast to UV light, visible light (380-780 nm) has much lower phototoxicity, deeper penetrability and easier accessibility, which make visible-light-excited RTP materials more favorable for practical uses, especially for life-related applications. Although it remains greatly challenging to construct visible-light-excited RTP materials, impressive progress has been made with the rapid development of this field. Herein, we systematically outline the significant progress achieved in visible-light-excited RTP materials, including the design and construction strategies, unique properties, underlying mechanisms and their vital applications. In the final section, we highlight the current challenges and research perspectives for suggesting future studies of visible-light-excited RTP materials.

Merocyanines: Electronic Structure and Spectroscopy in Solutions, Solid State, and Gas Phase

Merocyanines, owing to their readily tunable electronic structure, are arguably the most versatile functional dyes, with ample opportunities for tailored design via variations of both the donor/acceptor (D/A) end groups and π-conjugated polymethine chain. A plethora of spectral properties, such as strong solvatochromism, high polarizability and hyperpolarizabilities, and sensitizing capacity, motivates extensive studies for their applications in light-converting materials for optoelectronics, nonlinear optics, optical storage, fluorescent probes, etc. Evidently, an understanding of the intrinsic structure-property relationships is a prerequisite for the successful design of functional dyes. For merocyanines, these regularities have been explored for over 70 years, but only in the past three decades have these studies expanded beyond the theory of their color and solvatochromism toward their electronic structure in the ground and excited states. This Review outlines the fundamental principles, essential for comprehension of the variable nature of merocyanines, with the main emphasis on understanding the impact of internal (chemical structure) and external (intermolecular interactions) factors on the electronic symmetry of the D-π-A chromophore. The research on the structure and properties of merocyanines in different media is reviewed in the context of interplay of the three virtual states: nonpolar polyene, ideal polymethine, and zwitterionic polyene.

Fluoranthene imide dimers with strong isomeric effects on the charge transport properties

To date, the development of high-performance n-type organic semiconductors has remained challenging due to the scarcity of highly electron-deficient π-conjugated structural units and the difficulty of controlling intermolecular packing in the thin-film state. In addition, there have been few reports on the use of dimer design to tune the optoelectronic properties of materials. Herein, we report new cyano-substituted fluoranthene imide-based dimers (F16 and F17) for small-molecule n-type organic semiconductors. It is noteworthy that substituents at different positions lead to different film morphologies and very distinct thermal aggregation behaviors due to different dihedral angles. The self-assembly behavior of F17 improves thermal stability. Therefore, F17, which has a closer cyano groups structure, exhibits better field-effect transistor performance, with a maximum mobility of 6.6 × 10-4 cm2 V-1 s-1, while F16 does not exhibit any transistor performance.

Achieving Ultrasound-Excited Emission with Organic Mechanoluminescent Materials

Unlike traditional photoluminescence (PL), mechanoluminescence (ML) achieved under mechanical excitation demonstrates unique characteristics such as high penetrability, spatial resolution, and signal-to-background ratio (SBR) for bioimaging applications. However, bioimaging with organic mechanoluminescent materials remains challenging because of the shallow penetration depth of ML with short emission wavelengths and the absence of a suitable mechanical force to generate ML in vivo. To resolve these issues, the present paper reports the achievement of ultrasound (US)-excited fluorescence and phosphorescence from purely organic luminogens for the first time with emission wavelengths extending to the red/NIR region, with the penetrability of the US-excited emission being considerably higher than that of PL. Consequently, US-excited subcutaneous phosphorescence imaging can be achieved using a mechanoluminescent-luminogen-based capsule device with a quantified intensity of 9.15 ± 1.32 × 104 p s-1 cm-2 sr-1 and an SBR of 24. Moreover, the US-excited emission can be adequately tuned using the packing modes of the conjugated skeletons, dipole orientation of mechanoluminescent luminogens, and strength and direction of intermolecular interactions. Overall, this study innovatively expands the kind of excitation sources and the emission wavelengths of organic mechanoluminescent materials, paving the way for practical biological applications based on US-excited emission.

Advances in hybridized nanoarchitectures for improved oro-dental health

On a global note, oral health plays a critical role in improving the overall human health. In this vein, dental-related issues with dentin exposure often facilitate the risk of developing various oral-related diseases in gums and teeth. Several oral-based ailments include gums-associated (gingivitis or periodontitis), tooth-based (dental caries, root infection, enamel erosion, and edentulous or total tooth loss), as well as miscellaneous diseases in the buccal or oral cavity (bad breath, mouth sores, and oral cancer). Although established conventional treatment modalities have been available to improve oral health, these therapeutic options suffer from several limitations, such as fail to eradicate bacterial biofilms, deprived regeneration of dental pulp cells, and poor remineralization of teeth, resulting in dental emergencies. To this end, the advent of nanotechnology has resulted in the development of various innovative nanoarchitectured composites from diverse sources. This review presents a comprehensive overview of different nanoarchitectured composites for improving overall oral health. Initially, we emphasize various oral-related diseases, providing detailed pathological circumstances and their effects on human health along with deficiencies of the conventional therapeutic modalities. Further, the importance of various nanostructured components is emphasized, highlighting their predominant actions in solving crucial dental issues, such as anti-bacterial, remineralization, and tissue regeneration abilities. In addition to an emphasis on the synthesis of different nanostructures, various nano-therapeutic solutions from diverse sources are discussed, including natural (plant, animal, and marine)-based components and other synthetic (organic- and inorganic-) architectures, as well as their composites for improving oral health. Finally, we summarize the article with an interesting outlook on overcoming the challenges of translating these innovative platforms to clinics.

Platinum complexes with aggregation-induced emission

Transition metal-containing materials with aggregation-induced emission (AIE) have brought new opportunities for the development of biological probes, optoelectronic materials, stimuli-responsive materials, sensors, and detectors. Coordination compounds containing the platinum metal have emerged as a promising option for constructing effective AIE platinum complexes. In this review, we classified AIE platinum complexes based on the number of ligands. We focused on the development and performance of AIE platinum complexes with different numbers of ligands and discussed the impact of platinum ion coordination and ligand structure variation on the optoelectronic properties. Furthermore, this review analyzes and summarizes the influence of molecular geometries, stacking models, and aggregation environments on the optoelectronic performance of these complexes. We provided a comprehensive overview of the AIE mechanisms exhibited by various AIE platinum complexes. Based on the unique properties of AIE platinum complexes with different numbers of ligands, we systematically summarized their applications in electronics, biological fields, etc. Finally, we illustrated the challenges and opportunities for future research on AIE platinum complexes, aiming at giving a comprehensive summary and outlook on the latest developments of functional AIE platinum complexes and also encouraging more researchers to contribute to this promising field.

Thermally Activated Delayed Fluorescent Binuclear Copper(I) Alkynyl Complexes with Cuprophilic Interactions

Copper(I)-based thermally activated delayed fluorescence (TADF) emitters have been conceived to be promising candidates for display and lighting applications because of their multifarious structures and strong photoluminescence. Herein a string of binuclear Cu(I) complexes bearing pronounced cuprophilic interactions have been designed and synthesized. [Cu2(dppb)2(μ2-η1-C≡C-Ph)2] (1 a) and [Cu2(dppb)2(μ2-η1-C≡C-PPXZ)2] (1 b) display photoluminescence quantum yields of up to 67 % in doped films and solid states via TADF and exhibit reversible bicolor luminescence switching upon mechanical stimuli. Computational studies manifest that the metal-to-ligand charge transfer predominant transitions ensure a small energy splitting (ΔEST) between the lowest singlet (S1) and triplet (T1) excited states and cuprophilic interactions promote the spin-orbit coupling (SOC), favoring the reverse intersystem crossing (RISC) process. This study provides a new strategy for the construction of stimuli-responsive metal-based TADF materials.

Phenothiazine Derivatives as Small-Molecule Organic Cathodes with Adjustable Dropout Voltage and Cycle Performance

Compared with conventional inorganic materials, organic electrodes are competitive candidates for secondary battery cathodes due to their resourcefulness, environmental friendliness, and cost-effectiveness. Much effort is devoted at the level of chemical structure, while ignoring the impact of molecular aggregation on battery behavior. Herein, this work designs a series of organic molecules with two electrochemically active phenothiazine groups linked by different lengths of alkyl chain to regulate molecular symmetry and crystallinity. The results emphasize the equally important role of molecular aggregation and chemical structure for battery performance. Among them, 2PTZ-C7H14|Li cell exhibits the most impressive cycle and rate performance. At the high rate of 50 C, it can still deliver a capacity of 63.4 mA h g-1 and 74.5% capacity retention after 10 000 cycles. Besides, the dropout voltage of 2PTZ-C9H18|Li cell is only 52 mV, which is among the lowest reported for lithium-organic batteries to the best of the author's knowledge.

Controllable π-π coupling of intramolecular dimer models in aggregated states

π-π coupling as a common interaction plays a key role in emissions, transport and mechanical properties of organic materials. However, the precise control of π-π coupling is still challenging owing to the possible interference from other intermolecular interactions in the aggregated state, usually resulting in uncontrollable emission properties. Herein, with the rational construction of intramolecular dimer models and crystal engineering, π-π coupling can be subtly modulated by conformation variation with balanced π-π and π-solvent interactions and visualized by green-to-blue emission switching. Moreover, it can rapidly respond to temperature, pressure and mechanical force, affording a facile way to modulate π-π coupling in situ. This work contributes to a deeper understanding of the internal mechanism of molecular motions in aggregated states.