Enhancing the Performance of 2D Tin-Based Pure Red Perovskite Light-Emitting Diodes through the Synergistic Effect of Natural Antioxidants and Cyclic Molecular Additives

Tin (Sn)-based perovskites are being investigated in many optoelectronic applications given their similar valence electron configuration to that of lead-based perovskites and the potential environmental hazards of lead-based perovskites. However, the formation of high-quality Sn-based perovskite films faces several challenges, mainly due to the easy oxidation of Sn2+ to Sn4+ and the fast crystallization rate. Here, to develop an environmentally friendly process for Sn-based perovskite fabrication, a series of natural antioxidants are studied as additives and ascorbic acid (VitC) is found to have a superior ability to inhibit the oxidation problem. A common cyclic molecule, 18-Crown-6, is further added as a second additive, which synergizes with VitC to significantly reduce the nonradiative recombination pathways in the PEA2 SnI4 film. This synergistic effect greatly improves the performance of 2D red Sn-based PeLED, with a maximum external quantum efficiency of 1.87% (≈9 times that of the pristine device), a purer color, and better bias stability. This work demonstrates the potential of the dual-additive approach in enhancing the performance of 2D Sn-based PeLEDs, while the use of these environmentally friendly additives contributes to their future sustainability.

Investigating the Mobility-Compressibility Properties of Conjugated Polymers by the Contact Film Transfer Method with Prestrain

Up to now, researches on the mobility-stretchability of semiconducting polymers are extensively investigated, but little attention was  paid to their morphology and field-effect transistor characteristics under compressive strains, which is equally crucial in wearable electronic applications. In this work, a contact film transfer method is applied to evaluate the mobility-compressibility properties of conjugated polymers. A series of isoindigo-bithiophene conjugated polymers with symmetric carbosilane side chains (P(SiSi)), siloxane-terminated alkyl side chains (P(SiOSiO)), and combined asymmetric side chains (P(SiOSi)) are investigated. Accordingly, a compressed elastomer slab is used to transfer and compress the polymer films by releasing prestrain, and the morphology and mobility evolutions of these polymers are tracked. It is found that P(SiOSi) outperforms the other symmetric polymers including P(Si─Si) and P(SiO─SiO), having the ability to dissipate strain with its shortened lamellar spacing and orthogonal chain alignment. Notably, the mechanical durability of P(SiOSi) is also enhanced after consecutive compress-release cycles. In addition, the contact film transfer technique is demonstrated to be applicable to investigate the compressibility of different semiconducting polymers. These results demonstrate a comprehensive approach to understand the mobility-compressibility properties of semiconducting polymers under tensile and compressive strains.

Efficient Solar-Driven Water Splitting Enabled by Perovskite Photovoltaics and a Halogen-Modulated Metal-Organic Framework Electrocatalyst

Solar-driven water splitting powered by photovoltaics enables efficient storage of solar energy in the form of hydrogen fuel. In this work, we demonstrate efficient solar-to-hydrogen conversion using perovskite (PVK) tandem photovoltaics and a halogen-modulated metal-organic framework (MOF) electrocatalyst. By substituting tetrafluoroterephthalate (TFBDC) for terephthalic (BDC) ligands in a nickel-based MOF, we achieve a 152 mV improvement in oxygen evolution reaction (OER) overpotential at 10 mA·cm2. Through X-ray photoelectron spectroscopy (XPS), X-ray adsorption structure (XAS) analysis, theoretical simulation, and electrochemical results, we demonstrated that the introduction of fluorine atoms enhanced the intrinsic activity of Ni sites as well as the transfer property and accessibility of the MOF. Using this electrocatalyst in a bias-free photovoltaic electrochemical (PV-EC) system with a PVK/organic tandem solar cell, we achieve 6.75% solar-to-hydrogen efficiency (ηSTH). We also paired the electrocatalyst with a PVK photovoltaic module to drive water splitting at 206.7 mA with ηSTH of 10.17%.

Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Metal-organic framework (MOF) solids with their variable functionalities are relevant for energy conversion technologies. However, the development of electroactive and stable MOFs for electrocatalysis still faces challenges. Here, a molecularly engineered MOF system featuring a 2D coordination network based on mercaptan-metal links (e.g., nickel, as for Ni(DMBD)-MOF) is designed. The crystal structure is solved from microcrystals by a continuous-rotation electron diffraction (cRED) technique. Computational results indicate a metallic electronic structure of Ni(DMBD)-MOF due to the Ni-S coordination, highlighting the effective design of the thiol ligand for enhancing electroconductivity. Additionally, both experimental and theoretical studies indicate that (DMBD)-MOF offers advantages in the electrocatalytic oxygen evolution reaction (OER) over non-thiol (e.g., 1,4-benzene dicarboxylic acid) analog (BDC)-MOF, because it poses fewer energy barriers during the rate-limiting *O intermediate formation step. Iron-substituted NiFe(DMBD)-MOF achieves a current density of 100 mA cm^-2 at a small overpotential of 280 mV, indicating a new MOF platform for efficient OER catalysis.

Performance Enhancement of Lead-Free 2D Tin Halide Perovskite Transistors by Surface Passivation and Its Impact on Non-Volatile Photomemory Characteristics

Two-dimensional (2D) tin (Sn)-based perovskites have recently received increasing research attention for perovskite transistor application. Although some progress is made, Sn-based perovskites have long suffered from easy oxidation from Sn²⁺ to Sn⁴⁺ , leading to undesirable p-doping and instability. In this study, it is demonstrated that surface passivation by phenethylammonium iodide (PEAI) and 4-fluorophenethylammonium iodide (FPEAI) effectively passivates surface defects in 2D phenethylammonium tin iodide (PEA₂ SnI₄ ) films, increases the grain size by surface recrystallization, and p-dopes the PEA₂ SnI₄ film to form a better energy-level alignment with the electrodes and promote charge transport properties. As a result, the passivated devices exhibit better ambient and gate bias stability, improved photo-response, and higher mobility, for example, 2.96 cm² V^-1 s^-1 for the FPEAI-passivated films-four times higher than the control film (0.76 cm² V^-1 s^-1 ). In addition, these perovskite transistors display non-volatile photomemory characteristics and are used as perovskite-transistor-based memories. Although the reduction of surface defects in perovskite films results in reduced charge retention time due to lower trap density, these passivated devices with better photoresponse and air stability show promise for future photomemory applications.

N-Type Doping of Naphthalenediimide-Based Random Donor-Acceptor Copolymers to Enhance Transistor Performance and Structural Crystallinity

An integrated strategy of molecular design and conjugated polymer doping is proposed to improve the electronic characteristics for organic field effect transistor (OFET) applications. Here, a series of soluble naphthalene diimide (NDI)-based random donor-acceptor copolymers with selenophene π-conjugated linkers and four acceptors with different electron-withdrawing strengths (named as rNDI-N/S/NN/SS) are synthesized, characterized, and used for OFETs. N-type doping of NDI-based random copolymers using (12a,18a)-5,6,12,12a,13,18,18a,19-octahydro-5,6-dimethyl-13,18[1',2']-benzenobisbenzimidazo[1,2-b:2',1'-d]benzo[i][2.5]benzodiazocine potassium triflate adduct (DMBI-BDZC) is successfully demonstrated. The undoped rNDI-N, rNDI-NN, and rNDI-SS samples exhibit ambipolar charge transport, while rNDI-S presents only a unipolar n-type characteristic. Doping with DMBI-BDZC significantly modulates the performance of rNDI-N/S OFETs, with a 3- to 6-fold increase in electron mobility (μ_e) for 1 wt % doped device due to simultaneous trap mitigation, lower contact resistance (R_C), and activation energy (E_A), and enhanced crystallinity and edge-on orientation for charge transport. However, the doping of intrinsic pro-quinoidal rNDI-NN/SS films exhibits unchanged or even reduced device performance. These findings allow us to manipulate the energy levels by developing conjugated copolymers based on various acceptors and quinoids and to optimize the dopant-polymer semiconductor interactions and their impacts on the film morphology and molecular orientation for enhanced charge transport.

The Stability of Hybrid Perovskites with UiO-66 Metal-Organic Framework Additives with Heat, Light, and Humidity

This study is devoted to investigating the stability of metal-organic framework (MOF)-hybrid perovskites consisting of CH₃NH₃PbI₃ (MAPbI₃) and UiO-66 without a functional group and UiO-66 with different COOH, NH₂,and F functional groups under external influences including heat, light, and humidity. By conducting crystallinity, optical, and X-ray photoelectron spectra (XPS) measurements after long-term aging, all of the prepared MAPbI3@UiO-66 nanocomposites (with pristine UiO-66 or UiO-66 with additional functional groups) were stable to light soaking and a relative humidity (RH) of 50%. Moreover, the UiO-66 and UiO-66-(F)₄ hybrid perovskite films possessed a higher heat tolerance than the other two UiO-66 with the additional functional groups of NH₂ and COOH. Tthe MAPbI3@UiO-66-(F)₄ delivered the highest stability and improved optical properties after aging. This study provides a deeper understanding of the impact of the structure of hybrid MOFs on the stability of the composite films.

Regulating the phase distribution of quasi-2D perovskites using a three-dimensional cyclic molecule toward improved light-emitting performance

In this study, a molecule with a three-dimensional (3D) cyclic structure, a cryptand, is demonstrated as an effective additive for the quasi-two-dimensional (quasi-2D) PEA₂Cs_n-1Pb_nBr_3n+1 (n = 3, herein) to improve its light-emitting performance. The cryptand can effectively regulate the phase distribution of the quasi-2D perovskite through its intense interaction with PbBr₂, benefitting from its cage-like structure that can better capture the Pb²⁺ ions. Due to the inhibited growth of the low-n phases, a much-concentrated phase distribution is achieved for the cryptand-containing films. Moreover, its constituent O/N atoms can passivate the uncoordinated Pb²⁺ ions to improve the film quality. Such a synergistic effect thereby facilitates the charge/energy transfer among the multiple phases and reduces the non-radiative recombination. As a result, the quasi-2D perovskite light-emitting diode (PeLED) with the optimized cryptand doping ratio is shown to deliver the highest luminance (L_max) of 15 532 cd m^-2 with a highest external quantum efficiency (EQE) of 4.02%. Compared to the pristine device, L_max is enhanced by ∼5 times and EQE is enhanced by ∼10 times.

Freestanding 2D NiFe Metal-Organic Framework Nanosheets: Facilitating Proton Transfer via Organic Ligands for Efficient Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is crucial to electrochemical hydrogen production. However, designing and fabricating efficient electrocatalysts still remains challenging. By confinedly coordinating organic ligands with metal species in layered double hydroxides (LDHs), an innovative LDHs-assisted approach is developed to facilely synthesize freestanding bimetallic 2D metal-organic framework nanosheets (2D MOF NSs), preserving the metallic components and activities in OER. Furthermore, the research has demonstrated that the incorporation of carboxyl organic ligands coordinated with metal atoms as proton transfer mediators endow 2D MOF NSs with efficient proton transfer during the electrochemical OH_ads  → O_ads transition. These freestanding NiFe-2D MOF NSs require a small overpotential of 260 mV for a current density of 10 mA cm^-2 . When this strategy is applied to LDH nanosheets grown on nickel foam, the overpotential can be reduced to 221 mV. This outstanding OER activity supports the capability of multimetallic organic frameworks for the rational design of water oxidation electrocatalysts. This strategy provides a universal path to the synthesis of 2D MOF NSs that can be used as electrocatalysts directly.

Improving Thermal and Photostability of Polymer Solar Cells by Robust Interface Engineering

As the power conversion efficiency (PCE) of organic photovoltaics (OPVs) approaches 19%, increasing research attention is being paid to enhancing the device's long-term stability. In this study, a robust interface engineering of graphene oxide nanosheets (GNS) is expounded on improving the thermal and photostability of non-fullerene bulk-heterojunction (NFA BHJ) OPVs to a practical level. Three distinct GNSs (GNS, N-doped GNS (N-GNS), and N,S-doped GNS (NS-GNS)) synthesized through a pyrolysis method are applied as the ZnO modifier in inverted OPVs. The results reveal that the GNS modification introduces passivation and dipole effects to enable better energy-level alignment and to facilitate charge transfer across the ZnO/BHJ interface. Besides, it optimizes the BHJ morphology of the photoactive layer, and the N,S doping of GNS further enhances the interaction with the photoactive components to enable a more idea BHJ morphology. Consequently, the NS-GNS device delivers enhanced performance from 14.5% (control device) to 16.5%. Moreover, the thermally/chemically stable GNS is shown to stabilize the morphology of the ZnO electron transport layer (ETL) and to endow the BHJ morphology of the photoactive layer grown atop with a more stable thermodynamic property. This largely reduces the microstructure changes and the associated charge recombination in the BHJ layer under constant thermal/light stresses. Finally, the NS-GNS device is demonstrated to exhibit an impressive T₈₀ lifetime (time at which PCE of the device decays to 80% of the initial PCE) of 2712 h under a constant thermal condition at 65 °C in a glovebox and an outstanding photostability with a T₈₀ lifetime of 2000 h under constant AM1.5G 1-sun illumination in an N₂ -controlled environment.

Impact of the segment ratio on a donor-acceptor all-conjugated block copolymer in single-component organic solar cells

The development of single-component organic solar cells (SCOSCs) using only one photoactive component with a chemically bonded D/A structure has attracted increasing research attention in recent years. At represent, most relevant studies focus on comparing the performance difference between a donor-acceptor (D-A) conjugated block copolymer (CBC) and the commensurate blending systems based on the same donor and acceptor segments, and still there are no reports on the impact of the segment ratio for a certain D-A CBC on the resultant photovoltaic performance. In this study, we synthesized a D-A all-conjugated polymers based on an n-type PNDI2T block and a p-type PBDB-T donor block but with three different segment ratios (P1-P3) and demonstrate the significance of the D/A segment ratio on photovoltaic performance. Our results reveal that the n-type PNDI2T block plays a more critical role in the inter/intra-chain charge transfer. P1 with a higher content of PNDI2T delivers superior exciton dissociation and charge transfer behavior than P2 and P3, benefitting from its more balanced hole/electron mobility. In addition, a higher packing regularity associated with a more dominant face-on orientation is also observed for P1. As a result, SCOSC based on P1 exhibits the highest PCE among the synthesized CBCs. It also possesses a minimal energy loss due to the better suppressed non-radiative recombination loss. This work provides the first discussion of the impact of the segment ratio for a D-A all-conjugated block copolymer and signifies the critical role of the n-type segment in designing high-performance single-component CBCs.

Enhancing the Performance of Quasi-2D Perovskite Light-Emitting Diodes Using Natural Cyclic Molecules with Distinct Phase Regulation Behaviors

In this study, two natural small molecules, α-cyclodextrin (α-CD) and β-cyclodextrin (β-CD), are used as additives to improve the performance of quasi-2D PEA₂Cs_n-1Pb_nBr_3n+1 (n = 3, herein) PeLEDs. Both of them are shown to efficiently passivate the quasi-2D perovskite films to afford improved film quality and morphology, but they exhibit distinct phase regulation behaviors possibly due to their different pore sizes. It reveals that α-CD effectively suppresses the formation of the low-n phases (n ≤ 2), while β-CD better regulates the phase with a medium-n value (n = 3). Because of effectively suppressing the formation of low-n phases, the CD-assisted quasi-2D perovskite films possess facilitated exciton energy transfer and reduced nonradiative recombination. Consequently, the optimized α-CD-derived PeLED shows the highest luminance (L_max) of 37,825 cd/m² with an external quantum efficiency (EQE) of 3.81%, while the β-CD-derived PeLED delivers a lower L_max of 24,793 cd/m² with an EQE of 3.09%. Compared to the pristine device, L_max is enhanced by 6.3 and 3.8 times for α-CD- and β-CD-based PeLEDs, respectively, and EQE is enhanced by ∼4.8 times for both devices; besides, both CD-assisted devices also exhibit improved color purity and a lower bias dependency of electroluminescent intensity.

Inorganic-Cation Pseudohalide 2D Cs2 Pb(SCN)2 Br2 Perovskite Single Crystal

Most of the reported 2D Ruddlesden-Popper (RP) lead halide perovskites with the general formula of A_{n +1} B_n X_{3 n +1} (n = 1, 2, …) comprise layered perovskites separated by A-site-substituted organic spacers. To date, only a small number of X-site-substituted RP perovskites have been reported. Herein, the first inorganic-cation pseudohalide 2D phase perovskite single crystal, Cs₂ Pb(SCN)₂ Br₂ , is reported. It is synthesized by the antisolvent vapor-assisted crystallization (AVC) method at room temperature. It exhibits a standard single-layer (n = 1) Ruddlesden-Popper structure described in space group of Pmmn (#59) and has a small separation (d = 1.69 Å) between the perovskite layers. The SCN^- anions are found to bend the 2D Pb(SCN)₂ Br₂ framework slightly into a kite-shaped octahedron, limiting the formation of a quasi-2D perovskite structure (n > 1). This 2D single crystal exhibits a reversible first-order phase transformation to 3D CsPbBr₃ (Pm3m #221) at 450 K. It has a low exciton binding energy of 160 meV-one of the lowest for 2D perovskites (n = 1). A Cs₂ Pb(SCN)₂ Br₂ -single-crystal photodetector is demonstrated with respectable responsivity of 8.46 mA W^-1 and detectivity of ≈1.2 × 10¹⁰ Jones at a low bias voltage of 0.5 V.

An asymmetric 2,3-fluoranthene imide building block for regioregular semiconductors with aggregation-induced emission properties

For organic semiconductors, the development of electron-deficient building blocks has lagged far behind that of the electron-rich ones. Moreover, it remains a significant challenge to design organic molecules with efficient charge transport and strong solid-state emission simultaneously. Herein, we describe a facile synthetic route toward a new π-acceptor imide building block, namely 2,3-fluoranthene imide, based on which four regioregular small molecules (F1–F4) are synthesized by tuning the imide orientations and the central linkage bridges. All molecules exhibit attractive aggregation-induced emission (AIE) characteristics with strong far-red emission in the powder state, and F3 shows the highest photoluminescence quantum yield of 5.9%. F1 and F3 with a thiophene bridge present an obvious p-type characteristic, while for F3 with an outward imide orientation, the maximum hole mobility from a solution-processed field-effect transistor (FET) device reaches 0.026 cm² V⁻¹ s⁻¹, being ∼10⁴ times higher than the value of F1 with an inward imide orientation. By using a fluorinated thiophene bridge, the resulting F2 and F4 can be turned into n-type semiconductors, showing an electron mobility of ∼1.43 × 10⁻⁴ and ∼3.34 × 10⁻⁵ cm² V⁻¹ s⁻¹, respectively. Our work not only demonstrates that asymmetric 2,3-fluoranthene imide is a promising building block for constructing organic materials with high carrier mobility and strong solid-state emission, but also highlights the importance of regioregular structures in the materials' properties.

A new electron-deficient 2,3-fluoranthene imide unit was easily synthesized through a one-pot reaction for constructing small molecule regioregular semiconductors with good carrier transport ability and strong solid-state emission.

Surface engineered CoP/Co3O4 heterojunction for high-performance bi-functional water splitting electro-catalysis

In the electrochemical water splitting process, integrating hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in the same electrolyte with the same catalyst is highly beneficial for increasing the energy efficiency and reducing the fabrication cost. However, most OER catalysts are unstable in the acidic solution, while HER shows poor kinetics in the alkaline solution, which hinders the scale-up application of electro-catalytic water splitting. In this work, a CoP/Co₃O₄ heterostructure is firstly fabricated and then O and P defects are introduced via surface engineering (s-CoP/Co₃O₄). The as-prepared material was employed as the catalyst towards electrochemical water splitting in an alkaline environment. In alkaline HER, a current density of -10 mA cm^-2 can be achieved at an overpotential of 106 mV vs. RHE. In the OER process, the overpotential of s-CoP/Co₃O₄ electrode is only 211 mV vs. RHE at 10 mA cm^-2 in 1 M KOH, and the corresponding Tafel slope is only 58.4 mV dec^-1 so that the s-CoP/Co₃O₄ electrode could be used as the bifunctional catalyst for alkaline water splitting. This work provides a simple and low-cost approach to fabricate a Co-based heterojunction electrode with unsaturated metal sites to improve the electro-catalytic activities towards water splitting.

Designs from single junctions, heterojunctions to multijunctions for high-performance perovskite solar cells

Hybrid metal-halide perovskite solar cells (PVSCs) have drawn unprecedented attention during the last decade due to their superior photovoltaic performance, facile and low-cost fabrication, and potential for roll-to-roll mass production and application for portable devices. Through collective composition, interface, and process engineering, a comprehensive understanding of the structure-property relationship and carrier dynamics of perovskites has been established to help achieve a very high certified power conversion efficiency (PCE) of 25.5%. Apart from material properties, the modified heterojunction design and device configuration evolution also play crucial roles in enhancing the efficiency. The adoption and/or modification of heterojunction structures have been demonstrated to effectively suppress the carrier recombination and potential losses in PVSCs. Moreover, the employment of multijunction structures has been shown to reduce thermalization losses, achieving a high PCE of 29.52% in perovskite/silicon tandem solar cells. Therefore, understanding the evolution of the device configuration of PVSCs from single junction, heterojunction to multijunction designs is helpful for the researchers in this field to further boost the PCE beyond 30%. Herein, we summarize the evolution and progress of the single junction, heterojunction and multijunction designs for high-performance PVSCs. A comprehensive review of the fundamentals and working principles of these designs is presented. We first introduce the basic working principles of single junction PVSCs and the intrinsic properties (such as crystallinity and defects) in perovskite films. Afterwards, the progress of diverse heterojunction designs and perovskite-based multijunction solar cells is synopsized and reviewed. Meanwhile, the challenges and strategies to further enhance the performance are also summarized. At the end, the perspectives on the future development of perovskite-based solar cells are provided. We hope this review can provide the readers with a quick catchup on this emerging solution-processable photovoltaic technology, which is currently at the transition stage towards commercialization.

Materials Design and Optimization for Next-Generation Solar Cell and Light-Emitting Technologies

We review some of the most potent directions in the design of materials for next-generation solar cell and light-emitting technologies that go beyond traditional solid-state inorganic semiconductor-based devices, from both the experimental and computational standpoints. We focus on selected recent conceptual advances in tackling issues which are expected to significantly impact applied literature in the coming years. Specifically, we consider solution processability, design of dopant-free charge transport materials, two-dimensional conjugated polymeric semiconductors, and colloidal quantum dot assemblies in the fields of experimental synthesis, characterization, and device fabrication. Key modeling issues that we consider are calculations of optical properties and of effects of aggregation, including recent advances in methods beyond linear-response time-dependent density functional theory and recent insights into the effects of correlation when going beyond the single-particle ansatz as well as in the context of modeling of thermally activated fluorescence.

Comprehensive Non-volatile Photo-programming Transistor Memory via a Dual-Functional Perovskite-Based Floating Gate

Photonic transistor memory has received increasing attention as next-generation optoelectronic devices for light fidelity (Li-Fi) application due to the attractive advantages of ultra-speed, high security, and low power consumption. However, most transistor-type photonic memories developed to date still rely on electrical bias for operation, imposing certain limits on data transmission efficiency and energy consumption. In this study, the dual manipulation of "photo-writing" and "photo-erasing" of a novel photonic transistor memory is successfully realized by cleverly utilizing the complementary light absorption between the photoactive material, n-type BPE-PTCDI, in the active channel and the hybrid floating gate, CH₃NH₃PbBr₃/poly(2-vinylpyridine). The fabricated device not only can be operated under the full spectrum but also shows stable switching cycles of photo-writing (PW)-reading (R)-photo-erasing (PE)-reading (R) (PW-R-PE-R) with a high memory ratio of ∼10⁴, and the memory characteristics possess a stable long-term retention of >10⁴ s. Notably, photo-erasing only requires 1 s light illumination. Due to the fully optical functionality, the rigid gate electrode is removed and a novel two-terminal flexible photonic memory is fabricated. The device not only exhibits stable electrical performance after 1000 bending cycles but also manifests a multilevel functional behavior, demonstrating a promising potential for the future development of photoactive electronic devices.

Low-Cost Hole-Transporting Materials Based on Carbohelicene for High-Performance Perovskite Solar Cells

Two hole-transporting materials (HTMs) based on carbohelicene cores, CH1 and CH2, are developed and used in fabricating efficient and stable perovskite solar cells (PSCs). Owing to the rigid conformation of the helicene core, both compounds possess unique CH-π interactions in the crystalline packing pattern and good phase stability, which are distinct from the π-π intermolecular interactions of conventional planar and spiro-type molecules. PSCs based on CH1 and CH2 as HTMs deliver excellent device efficiencies of 19.36 and 18.71%, respectively, outperforming the control device fabricated with spiro-OMeTAD (18.45%). Furthermore, both PSCs exhibit better ambient stability, with 90% of initial performance retained after aging with a 50-60% relative humidity at 25 °C for 500 h. Due to the low production cost of both compounds, these newly designed carbohelicene-type HTMs have the potential for the future commercialization of PSCs.

A Simple Dithieno[3,2-b:2',3'-d]pyrrol-Rhodanine Molecular Third Component Enables Over 16.7% Efficiency and Stable Organic Solar Cells

Organic solar cells (OSCs) can achieve greatly improved power conversion efficiency (PCE) by incorporating suitable additives in active layers. Their structure design often faces the challenge of operation generality for more binary blends. Herein, a simple dithieno[3,2-b:2',3'-d]pyrrole-rhodanine molecule (DR8) featuring high compatibility with polymer donor PM6 is developed as a cost-effective third component. By employing classic ITIC-like ITC6-4Cl and Y6 as model nonfullerene acceptors (NFAs) in PM6-based binary blends, DR8 added PM6:ITC6-4Cl blends exhibit significantly promoted energy transfer and exciton dissociation. The PM6:ITC6-4Cl:DR8 (1:1:0.1, weight ratio) OSCs contribute an exciting PCE of 14.94% in comparison to host binary devices (13.52%), while PM6:Y6:DR8 (1:1.2:0.1) blends enable 16.73% PCE with all simultaneously improved photovoltaic parameters. To the best of the knowledge, this performance is among the best for ternary OSCs with simple small molecular third components in the literature. More importantly, DR8-added ternary OSCs exhibit much improved device stability against thermal aging and light soaking over binary ones. This work provides new insight on the design of efficient third components for OSCs.

Intrinsically stretchable naphthalenediimide–bithiophene conjugated statistical terpolymers using branched conjugation break spacers for field–effect transistors

A series of naphthalene−diimide based conjugated polymers was synthesized through statistical terpolymerization with branched conjugation break spacers to enhance their mobility−stretchability properties in field-effect transistors.

Backbone Engineering of Diketopyrrolopyrrole-Based Conjugated Polymers through Random Terpolymerization for Improved Mobility-Stretchability Property

Conjugated polymers synthesized through random terpolymerization have recently attracted great research interest due to the synergetic effect on the polymer's crystallinity and semiconducting properties. Several studies have demonstrated the efficacy of random terpolymerization in fine-tuning the aggregation behavior and optoelectronic property of conjugated polymers to yield enhanced device performance. However, as an influential approach of backbone engineering, its efficacy in modulating the mobility-stretchability property of high-performance conjugated polymers has not been fuller explored to date. Herein, a series of random terpolymers based on the diketopyrrolopyrrole-bithiophene (DPP-2T) backbone incorporating different amounts of isoindigo (IID) unit are synthesized, and their structure-mobility-stretchability correlation is thoroughly investigated. Our results reveal that random terpolymers containing a low IID content (DPP95 and DPP90) show enhanced interchain packing and solid-state aggregation to result in improved charge-transporting performance (can reach 4 order higher) compared to the parent polymer DPP100. In addition, owing to the enriched amorphous feature, DPP95 and DPP90 deliver an improved orthogonal mobility (μ_h) of >0.01 cm² V^-1 s^-1 under a 100% strain, higher than the value (∼0.002 cm² V^-1 s^-1) of DPP100. Moreover, DPP95 even yields 20% enhanced orthogonal μ_h retention after 800 stretching-releasing cycles with 60% strain. As concluded from a series of analyses, the improved mobility-stretchability property exerted by random terpolymerization arises from the enriched amorphous feature and enhanced aggregation behavior imposed by the geometry mismatch between different acceptors (DPP and IID). This study demonstrates that backbone engineering through rational random terpolymerization not only enhances the mobility-stretchability of a conjugated polymer but also realizes a better mechanical endurance, providing a new perspective for the design of high-performance stretchable conjugated polymers.

Two-Dimensional Cs2Pb(SCN)2Br2-Based Photomemory Devices Showing a Photoinduced Recovery Behavior and an Unusual Fully Optically Driven Memory Behavior

The rapid development of Internet of Things and big data has made the conventional storage devices face the need of reforming. Rather than using electrical pulses to store data in one of two states, photomemory exploiting optical stimulation to store light information emerges as a revolutionary candidate for the optoelectronic community. However, fully optically driven photomemory with fast data transmission speed and outstanding energy saving capability suffers from less exploration. Herein, a transistor-type photomemory using a 2D Cs₂Pb(SCN)₂Br₂/polymer hybrid floating gate is explored and three host polymers, polystyrene, poly(4-vinylphenol), and poly(vinylpyrrolidone) (PVP), are investigated to understand the relationship between polymer matrix selection and memory performance. All devices show a photoinduced recovery memory behavior but with two distinctly different photomemory behaviors. In addition to the demonstration of a regular nonvolatile photomemory showing a high on/off ratio of >10⁶ over 10⁴ s, an unusual fully optically driven memory behavior is intriguingly accomplished in the Cs₂Pb(SCN)₂Br₂/PVP photomemory. Using white light as the driver of programming and a blue laser as the main performer of erasing, this device can be switched between two distinguishable states and possesses acceptable data discriminability, as evidenced by its fully optically driven writing (programing)-reading-erasing-reading switching function that shows an on/off current ratio of 10³. This study not only presents the first 2D perovskite-based photomemory but also shows a novel fully optically driven memory that has been rarely reported in the literature.

Solution-Processable Anion-doped Conjugated Polymer for Nonvolatile Organic Transistor Memory with Synaptic Behaviors

Brain-inspired synaptic transistors have been considered as a promising device for next-generation electronics. To mimic the behavior of a biological synapse, both data processing and nonvolatile memory capability are simultaneously required for a single electronic device. In this work, a simple approach to realize a synaptic transistor with improved memory characteristics is demonstrated by doping an ionic additive, tetrabutylammonium perchlorate (TBAP), into an active polymer semiconductor without using any extra charge storage layer. TBAP doping is first revealed to improve the memory window of a derived transistor memory device from 19 to 32 V (∼68% enhancement) with an on/off current ratio over 10³ at V_G = -10 V. Through morphological analysis and theoretical calculations, it is revealed that the association of anion with polymers enhances the charge retention capability of the polymer and facilitates the interchain interactions to result in improved memory characteristics. More critically, the doped device is shown to successfully mimic the synaptic behaviors, such as paired-pulse facilitation (PPF), excitatory and inhibitory postsynaptic currents, and spike-rate dependent plasticity. Notably, the TBAP-doped device is shown to deliver a PPF index of up to 204% in contrast to the negligible value of an undoped device. This study describes a novel approach to prepare a synaptic transistor by doping conjugated polymers, which can promote the future development of artificial neuromorphic systems.

Study on Intrinsic Stretchability of Diketopyrrolopyrrole-Based π-Conjugated Copolymers with Poly(acryl amide) Side Chains for Organic Field-Effect Transistors

The development of a π-conjugated polymer with hydrogen-bonding moieties has aroused great attention because of the improved molecular stacking and the hydrogen-bonding network. In this study, PDPPTVT (diketopyrrolopyrrole-thiophenevinylenethiophene) and PDPPSe (diketopyrrolopyrrole-selenophene) alkylated with a carbosilane (SiC8) side chain and poly(acryl amide) (PAM)-incorporated alkyl side chain were prepared, and their structure-performance and structure-stretchability correlation were evaluated. By incorporating the DPPTVT backbone and 0, 5, 10, or 20% PAM-incorporated alkyl side chain, the μ_h value could reach 2.0, 0.97, 0.74, and 0.42 cm² V^-1 s^-1, respectively (P1 to P4). The polymer with the PDPPSe backbone and 5% PAM-incorporated alkyl side-chain (P5) exhibited the maximum μ_h value of 0.96 cm² V^-1 s^-1. By extending the PAM moiety from the backbone with alkyl spacers, the solid-state packing and edge-on orientation can be properly maintained. Surprisingly, the PAM-incorporated alkyl side-chain can provide a hydrogen-bonding network serving as sacrificial bonding to mechanical deformation. Therefore, the relevant changes in the crystallographic parameters including the crystalline size and the in-plane π-π stacking distance with a 100% external strain were less than 4 and 0.8%, respectively, from P1 to P3. Therefore, P3 achieved an excellent stretchability while maintaining its molecular orientation and charge-transporting performance. Even with 100% external strain, P3 still provided an orthogonal μ_h over 0.1 cm² V^-1 s^-1. Moreover, by substituting the TVT moiety with the Se moiety, the ductility of the backbone can be further increased when the elastic modulus decreases from 0.80 to 0.36 GPa for P2 to P5. The achieved high μ_h retention is over 20% after 500 stretching-releasing cycles with a 60% external strain perpendicular to the channel direction for the polymer composed of PDPPSe and 5% PAM content. The results manifest that our newly designed DPP with the PAM-incorporated alkyl side chain provides a promising approach to promote the intrinsic stretchability of the π-conjugated polymers.

Over 15% Efficiency in Ternary Organic Solar Cells by Enhanced Charge Transport and Reduced Energy Loss

In this study, an efficient ternary bulk-heterojunction (BHJ) organic solar cell (OSC) is demonstrated by incorporating two acceptors, PC₆₁BM and ITC6-4F, with a polymer donor (PM6). This reveals that the addition of PC₆₁BM not only enhances the electron mobility of the derived BHJ blend but also facilitates exciton dissociation, resulting in a more balanced charge transport alongside with reduced trap-assisted charge recombination. Consequently, as compared to the pristine PM6/ITC6-4F device, the optimal ternary OSC is revealed to deliver an improved power conversion efficiency (PCE) of 15.11% with a boosted J_SC, V_OC, and fill factor (FF) simultaneously. The resultant V_OC and FF are among the highest values recorded in the literature for the ternary OSCs with a PCE exceeding 15%. This result thus suggests that besides improving the charge transport characteristics in devices, incorporating a fullerene derivative as part of the acceptor can also improve the resultant V_OC, which can reduce the energy loss to realize efficient organic photovoltaics.

Improving the Performance and Stability of Perovskite Light-Emitting Diodes by a Polymeric Nanothick Interlayer-Assisted Grain Control Process

CsPbBr₃ is a promising light-emitting material due to its wet solution processability, high photoluminescence quantum yield (PLQY), narrow color spectrum, and cost-effectiveness. Despite such advantages, the morphological defects, unsatisfactory carrier injection, and stability issues retard its widespread applications in light-emitting devices (LEDs). In this work, we demonstrated a facile and cost-effective method to improve the morphology, efficiency, and stability of the CsPbBr₃ emissive layer using a dual polymeric encapsulation governed by an interface-assisted grain control process (IAGCP). An eco-friendly low-cost hydrophilic polymer poly(vinylpyrrolidone) (PVP) was blended into the CsPbBr₃ precursor solution, which endows the prepared film with a better surface coverage with a smoothened surface. Furthermore, it is revealed that inserting a thin PVP nanothick interlayer at the poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS)/emissive layer interface further promotes the film quality and the performance of the derived LED. It is mainly attributed to three major consequences: (i) reduced grain size of the emissive layer, which facilitates charge recombination, (ii) reduced current leakage due to the enhanced electron-blocking effect, and (iii) improved color purity and air stability owing to better defect passivation. As a result, the optimized composite emissive film can retain the luminescence properties even on exposure to ambient conditions for 80 days and ∼62% of its initial PL intensity can be preserved after 30 days of storage without any encapsulation.

Facile Fabrication of Stretchable Touch-Responsive Perovskite Light-Emitting Diodes Using Robust Stretchable Composite Electrodes

Perovskite light-emitting diode (PeLED) has been vigorously developed in recent years. As it has demonstrated good performance on the rigid substrates, the next important direction of PeLED is its integration with stretchable components to realize stretchable, responsive device. Here, we describe a facile fabrication of stretchable perovskite light-emissive touch-responsive devices (PeLETDs) by utilizing highly transparent and conductive polyurethane/silver nanowires (PU/AgNWs) as the electrode. Meanwhile, a stretchable tricomposite perovskite emissive layer was developed by blending a small amount of poly(ethylene oxide) (PEO) and poly(vinylpyrrolidone) (PVP) with CsPbBr₃. Additionally, a thin PVP layer was introduced at the bottom of the emissive layer. On one hand, it can further improve the morphology of the emissive layer; on the other hand, it can serve as an electron-injection barrier to reduce the high nonradiative recombination at the corresponding interface. Further, to fulfill the responsive function of the fabricated PeLEDs, a poly(ethylene terephthalate) (PET) spacer with a 100 μm thickness was inserted between the top electrode and the emissive layer. A stretchable PeLETD is finally demonstrated to possess a low turn-on voltage of 2 V with a brightness of 380.5 cd m^-2 at 7.5 V and can sustain 30% uniaxial strain with a small luminance variation of 24%. More interestingly, our stretchable PeLETD exhibited high stability, which could be well touch responsivity, where the luminance is on/off switched for 300 cycles by repeatedly applying pressure.

Development of Block Copolymers with Poly(3-hexylthiophene) Segments as Compatibilizers in Non-Fullerene Organic Solar Cells

Poly(3-hexylthiophene) (P3HT)-segment-based block copolymers have been reported to deliver an effective compatibilizer function in the P3HT:PC₆₁BM bulk-heterojunction (BHJ) system to simultaneously improve performance and stability. However, as limited by the deficient optophysic properties of the P3HT:PC₆₁BM system, the resultant power conversion efficiency (PCE) of compatibilizer-mediated devices is low despite the optimized chemical structures of the P3HT-segment-based block copolymers. To better shed light on such a compatibilizer effect, the compatibilizer function of the P3HT-segment-based block copolymers is herein investigated in the emerging non-fullerene acceptor (NFA)-based BHJ systems. A P3HT analogue, poly[(4,4'-bis(2-butyloctoxycarbonyl-[2,2'-bithiophene]-5,5-diyl)-alt-(2,2'-bithiophene-5,5'-diyl))] (PDCBT), is used as the polymer donor since it shares the same backbone as P3HT to afford good compatibility with the P3HT-segment-based block copolymers and it has been proven to deliver a higher PCE than P3HT in the NFA BHJ systems. The P3HT-segment-based block copolymers (P1-P4) are manifested to offer similar compatibilizer functions for the PDCBT-based NFA BHJ systems, and the importance of their structural design is also revealed. As a result, addition of P4 delivers the largest enhancement in PCE: from 5.30 to 7.11% for the PDCBT:ITIC blend and from 6.21 to 8.04% for the PDCBT:IT-M blend. Moreover, it can also enhance the device's thermal stability, which can maintain 77% of the initial PCE after annealing at 85 °C for 120 h (for the PDCBT:ITIC blend), outperforming the pristine binary device (66% preservation). More importantly, the entire compatibilizer-mediated device exhibits an improved V_oc. Such reduced potential loss can be attributed to the improved interfacial compatibility between the photoactive components, the most important function of a compatibilizer.

XPS evidence of degradation mechanism in CH3NH3PbI3 hybrid perovskite

In this study, we investigate the photo-/thermal degradation mechanism of hybrid perovskites by using x-ray photoelectron (XPS) valence band (VB) spectra coupling with density functional theory (DFT) calculations. Herein, CH₃NH₃PbI₃ is respectively subjected to irradiation with visible light and annealing at an exposure of 0-1000 h. It is found from XPS survey spectra that, in both cases (irradiation and annealing), a decrease in the I:Pb ratio is observed with aging time, which unambiguously indicates the formation of PbI₂ as the product of photo/thermal degradation. The comparison of the XPS VB spectra of irradiated and annealed perovskites with the DFT calculations of CH₃NH₃PbI₃ and PbI₂ compounds have showed a systematic decrease in the contribution of I-5p states, which allows us to determine the respective threshold for degradation, which is 500 h for light irradiation and 200 h for annealing. This discrepancy might be due to the fact that the relaxation of thermal excitations of the system is carried out only by the phonons (which are non-radiative physical processes) while the radiative processes occurred during the photoexcitation will elastically or inelastically divert part of the external energy from the system to reduce its impact on perovskite degradation.

Exploitation of Thermoresponsive Switching Organic Field-Effect Transistors

In this work, a novel thermoresponsive switching transistor is developed through the rational design of active materials based on the typical field-effect transistor (FET) device configuration, where the active material is composed of a blend of a thermal expansion polymer and a polymeric semiconductor. Herein, polyethylene (PE) is employed as the thermal expansion polymer because of its high volume expansion coefficient near its melting point (90-130 °C), which similarly corresponds to the overheating point that would cause damage or cause fire in the devices. It is revealed that owing to the thermistor property of PE, the FET characteristics of the derived device will be largely decreased at high temperatures (100-120 °C). It is because the high volume expansion of PE at such high temperature (near its T m) effectively increases the distance of the crystalline domains of poly(3-hexylthiophene-2,5-diyl) to result in a great inhibition of current. Besides, the performance of this device will recover back to its original value after cooling from 120 to 30 °C owing to the volume contraction of PE. The reversible FET characteristics with temperature manifest the good thermal sensitivity of the PE-based device. Our results demonstrate a facile and promising approach for the development of next-generation overheating shutdown switches for electrical circuits.

Enhanced Near-Infrared Photoresponse of Inverted Perovskite Solar Cells Through Rational Design of Bulk-Heterojunction Electron-Transporting Layers

How to extend the photoresponse of perovskite solar cells (PVSCs) to the region of near-infrared (NIR)/infrared light has become an appealing research subject in this field since it can better harness the solar irradiation. Herein, the typical fullerene electron-transporting layer (ETL) of an inverted PVSC is systematically engineered to enhance device's NIR photoresponse. A low bandgap nonfullerene acceptor (NFA) is incorporated into the fullerene ETL aiming to intercept the NIR light passing through the device. However, despite forming type II charge transfer with fullerene, the blended NFA cannot enhance the device's NIR photoresponse, as limited by the poor dissociation of photoexciton induced by NIR light. Fortunately, it can be addressed by adding a p-type polymer. The ternary bulk-heterojunction (BHJ) ETL is demonstrated to effectively enhance the device's NIR photoresponse due to the better cascade-energy-level alignment and increased hole mobility. By further optimizing the morphology of such a BHJ ETL, the derived PVSC is finally demonstrated to possess a 40% external quantum efficiency at 800 nm with photoresponse extended to the NIR region (to 950 nm), contributing ≈9% of the overall photocurrent. This study unveils an effective and simple approach for enhancing the NIR photoresponse of inverted PVSCs.

A 0D/3D Heterostructured All-Inorganic Halide Perovskite Solar Cell with High Performance and Enhanced Phase Stability

Although organic-inorganic hybrid perovskite solar cells (PVSCs) have achieved dramatic improvement in device efficiency, their long-term stability remains a major concern prior to commercialization. To address this issue, extensive research efforts are dedicated to exploiting all-inorganic PVSCs by using cesium (Cs)-based perovskite materials, such as α-CsPbI₃ . However, the black-phase CsPbI₃ (cubic α-CsPbI₃ and orthorhombic γ-CsPbI₃ phases) is not stable at room temperature, and it tends to convert to the nonperovskite δ-CsPbI₃ phase. Here, a simple yet effective approach is described to prepare stable black-phase CsPbI₃ by forming a heterostructure comprising 0D Cs₄ PbI₆ and γ-CsPbI₃ through tuning the stoichiometry of the precursors between CsI and PbI. Such heterostructure is manifested to enable the realization of a stable all-inorganic PVSC with a high power conversion efficiency of 16.39%. This work provides a new perspective for developing high-performance and stable all-inorganic PVSCs.

Asymmetric Side-Chain Engineering of Isoindigo-Based Polymers for Improved Stretchability and Applications in Field-Effect Transistors

Thus far, there is still no study systematically investigating the influence of asymmetric side-chain design on a polymer's stretchability and its associated stretchable device applications. Herein, three kinds of asymmetric side chains consisting of carbosilane side chain (Si-C8), siloxane-terminated side chain (SiO-C8), and decyltetradecane side chain (DT) are engineered in isoindigo-bithiophene (PII2T, P1-P3) and isoindigo-difluorobithiophene (PII2TF, P4-P6) conjugated polymers, and their structure-stretchability correlation is explored in field-effect transistor characterization. It is revealed that owing to the geometric difference between the side chains, different asymmetric side-chain combinations impose distinct influences on the molecular stacking and orientation of the derived polymers. Surprisingly, the combination of asymmetric side chains and backbone fluorination is shown to deliver the best stretchability and mechanical durability of the derived polymer. Consequently, P6 consisting of asymmetric Si-C8/DT side chains and fluorinated backbone possesses the best mobility preservation of 81% at 100% strain with the stretching force perpendicular to the charge-transporting direction. Moreover, it presents 90% mobility retention after 400 stretching-releasing cycles with 60% strain, greatly exceeding the value (36%) of the non-fluorinated counterpart (P3). Our results suggest that the rational design of asymmetric side chains and backbone fluorination provides an efficient way to enhance the intrinsic stretchability of conjugated polymers.

Photon-Induced Reshaping in Perovskite Material Yields of Nanocrystals with Accurate Control of Size and Morphology

Benefiting from morphology-/size-tunable optical features, nanocrystals have been considered promising candidates for display or lighting applications. To achieve selective characteristic emission, precise control in size and morphology is thus a prerequisite. Herein, we report that the nanosecond-pulsed laser irradiation induces CsPbBr₃ reshaping, yielding precise control of size and morphology. Under 532 and 355 nm laser irradiation, polydisperse CsPbBr₃ nanocrystals or raw micron powders can be reshaped into uniform sizes of 12 and 6 nm, respectively. Moreover, by tuning ligand composition, the morphology of reshaped nanocrystals can be manipulated, such as nanocubes, nanorods, or nanosheets. Results reveal that the reshaping process relies on striving for a delicate balance between energy deposition and heat dissipation under irradiation. A low dissipation rate leads to temperature rising and lattice breaking, which turn out to be the driving forces for reshaping. This feasible method provides a reliable, and scalable route toward preparation of perovskite functional nanocrystals.

Stretchable and Ambient Stable Perovskite/Polymer Luminous Hybrid Nanofibers of Multicolor Fiber Mats and Their White LED Applications

We report the fabrication and optical/mechanical properties of perovskite/thermoplastic polyurethane (TPU)-based multicolor luminescent core-shell nanofibers and their large-scale fiber mats. One-step coaxial perovskite/TPU nanofibers had a high photoluminescence quantum yield value exceeding 23.3%, surpassing that of its uniaxial counterpart, due to the homogeneous distribution of perovskite nanoparticles (NPs) by the confinement of the TPU shell. The fabricated core-shell nanofibers exhibited a high mechanical endurance owing to the well elastic properties of TPU and maintained the luminescence intensity even under a 100% stretched state after 1000 stretching-relaxing cycles. By taking advantage of the hydrophobic nature of TPU, the ambient and moisture stability of the fabricated fibers were enhanced up to 1 month. Besides, large-area stretchable nanofibers with a dimension of 15 cm × 30 cm exhibiting various visible-light emission peaks were fabricated by changing the composition of perovskite NPs. Moreover, a large-scale luminescent and stretchable fiber mat was successfully fabricated by electrospinning. Furthermore, the white-light emission from the fabricated fibers and mats was achieved by incorporating orange-light-emitting poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] into the TPU shell and coupling the turquoise blue-light-emitting perovskite NPs in the core site. Finally, the integrity of the perovskite-based TPU fibers was realized by fabricating a light-emitting diode (LED) device containing the orange-light-emitting fibers embedded in the polyfluorene emissive layer. This work demonstrated an effective way to prepare stable and stretchable luminous nanofibers and the integration of such nanofibers into LED devices, which could facilitate the future development of wearable electronic devices.

Stable, color-tunable 2D SCN-based perovskites: revealing the critical influence of an asymmetric pseudo-halide on constituent ions

Two-dimensional (2D) layered perovskites (An+1BnX3n+1, n = 1, 2, …) have recently attracted significant research interest because of their enhanced ambient stability compared to their conventional 3D counterparts. In addition to the common A-site cation engineering, using an asymmetric pseudo-halide anion, SCN-, in the anion X-site has been recently proven to be another effective approach to constitute 2D perovskites. Among these, 2D (MA)2Pb(SCN)2I2 was the most widely investigated and was considered to be a promising material owing to its good optoelectronic properties; however, its poor stability has aroused concerns in recent researches. In this study, systematical composition engineering of A2Pb(SCN)2X2 (A = FA+, MA+, Cs+ and X = Br-, I-) was conducted. Our results revealed that the linear SCN- anion dictates critical restrictions on the constituent ions of its derived 2D framework (PbX4(SCN)2), which has not yet been extensively discussed. We demonstrated that using a smaller Cs+ cation can afford a more favorable 2D structure compared with the MA+ cation. Cs2Pb(SCN)2I2 was revealed to possess improved stability and photo-response compared to (MA)2Pb(SCN)2I2. Interestingly, Cs2Pb(SCN)2I2 and (MA)2Pb(SCN)2I2 appear to possess distinct electronic band structures. This is indicated by their discrepant photoluminescence spectra, in which the former exhibits a rather intense singlet emission at room temperature in contrast with the latter, which shows a dominant emission associated with triplet or defective states. Furthermore, using a smaller Cs+ cation enables facile replacement of a smaller halide anion. A series of mixed-halide 2D Cs2Pb(SCN)2(I1-xBrx)2 (x = 0, 1/3, 1/2, 2/3, 1) with varying vivid colors was explored by both calculation and experimental efforts to corroborate the enhanced stability when the x value increases. The results revealed in this study might represent a novel discovery of an inherent trait of the 2D SCN-based perovskites and also suggest that the all-inorganic 2D Cs2Pb(SCN)2X2 perovskite system is a promising class of materials with good stability and color-tunability that deserves further exploration.

Alcohol-Soluble Cross-Linked Poly( nBA) n- b-Poly(NVTri) m Block Copolymer and Its Applications in Organic Photovoltaic Cells for Improved Stability

In this study, a series of alcohol-soluble cross-linked block copolymers (BCPs) consisting of poly( n-butyl acrylate) (poly( nBA)) and poly( N-vinyl-1,2,4-triazole) (poly(NVTri)) blocks with different individual functions and lengths are designed and developed. These presynthesized cross-linked BCPs (PBA _n-Tri _m) were, for the first time, revealed to exhibit many advantages in serving as the electron-extraction layer (EEL) for organic photovoltaics (OPVs). The cross-linked BCPs possessed intense ionic functionality, showing well capability to form effective interfacial dipoles at the indium tin oxide interface to facilitate the charge extraction at the corresponding interface. Furthermore, it also consisted a core-shell structure, wherein the polar poly(NVTri) core was well protected by the poly( nBA) shell to endow improved robustness against solvent erosion and thermal/photo inputs. Consequently, the PBA₇₀-Tri₃₀ device yielded a decent power conversion efficiency of 8.03% with a V_oc of 0.83 V, much exceeding the performance of the control device without using any EEL. Moreover, this device showed superior thermal stability/photostability. More than 80% of its initial performance was retained after being heated at 60 °C for 1000 h or exposed under continuous illumination (1 sun) for 1000 h, greatly surpassing the lifetime of the control device and the reference device using a common poly[(9,9-bis(3'-( N, N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) EEL. The results revealed the merit of using cross-linked BCPs in improving the long-term stability of OPVs.

Influence of polymeric electrets on the performance of derived hybrid perovskite-based photo-memory devices

Organic-inorganic hybrid perovskite has become one of the most important photoactive materials owing to its intense light-harvesting property as well as its facile solution processability. Besides its photovoltaic applications, a novel photo-programmed transistor memory was recently developed based on the device architecture of a floating-gate transistor memory using a polymer/perovskite blend as the gate dielectric with the non-volatile memory characteristics of decent light response, applicable On/Off current ratio, and long retention time. In this study, we further clarify the influence of polymer matrix selection on the photo-response and memory properties of derived hybrid perovskite-based photo-memory devices. Four different host polymers, polystyrene (PS), poly(4-vinylphenol) (PVPh), poly(methyl methacrylate) (PMMA), and poly(methacrylic acid) (PMAA), were systematically investigated for comparison herein. This revealed that dissimilar chemical interactions existed between the host polymers and perovskite, resulting in the distinct memory behavior of the derived photo-memory devices, attributable to the different morphologies of the hybrid dielectric layers and the different sizes of the distributed perovskite nanoparticles (NPs). The photo-response behavior and the resultant On/Off current ratio increased as the size of the embedded perovskite NPs decreased, due to the enhanced photo-induced charge transfer across the dielectric/pentacene interface, benefiting from the better confinement effect of perovskite NPs in the polymer matrix. These results demonstrate the influence of perovskite NP aggregation at the dielectric/pentacene interface on the resultant memory behavior of the newly developed photo-memory device.

Realization of Intrinsically Stretchable Organic Solar Cells Enabled by Charge-Extraction Layer and Photoactive Material Engineering

The rapid development of wearable electronic devices has prompted a strong demand to develop stretchable organic solar cells (OSCs) to serve as the advanced powering systems. However, to realize an intrinsically stretchable OSC is challenging because it requires all the constituent layers to possess certain elastic properties. It thus necessitates a combined engineering of charge-transporting layers and photoactive materials. Herein, we first describe a stretchable electron-extraction layer using a blend of poly[(9,9-bis(3'-( N, N-dimethylamino)propyl)-2,7-fluorene)- alt-2,7-(9,9-dioctylfluorene)] (PFN) and nitrile butadiene rubber (NBR, Nipol 1072). This hybrid PFN/NBR layer exhibits a much lower Derjaguin-Muller-Toporov modulus (0.45 GPa) than the value (1.25 GPa) of the pristine PFN and could withstand a high strain (60% strain) without showing any cracks. Moreover, besides enriching the stretchability of PFN, the terminal carboxyl groups of NBR can ionize PFN to promote its solution-processability in polar solvents and to ensure the interfacial dipole formation at the corresponding interface in the device, as evidenced by the Fourier transform infrared and ultraviolet photoelectron spectroscopy analyses. By further coupling the replacement of [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) with nonfullerene acceptors owing to better mechanical stretchability in the photoactive layer, OSCs with improved intrinsically stretchability and performance were demonstrated. An all-polymer OSC can exhibit a power conversion efficiency of 2.82% after 10% stretching, surpassing the PCBM-based device that can only withstand 5% strain.

Bio-Based Transparent Conductive Film Consisting of Polyethylene Furanoate and Silver Nanowires for Flexible Optoelectronic Devices

Exploiting biomass has raised great interest as an alternative to the fossil resources for environmental protection. In this respect, polyethylene furanoate (PEF), one of the bio-based polyesters, thus reveals a great potential to replace the commonly used polyethylene terephthalate (PET) on account of its better mechanical, gas barrier, and thermal properties. Herein, a bio-based, flexible, conductive film is successfully developed by coupling a PEF plastic substrate with silver nanowires (Ag NWs). Besides the appealing advantage of renewable biomass, PEF also exhibits a good transparency around 90% in the visible wavelength range, and its constituent polar furan moiety is revealed to enable an intense interaction with Ag NWs to largely enhance the adhesion of Ag NWs grown above, as exemplified by the superior bending and peeling durability than the currently prevailing PET substrate. Finally, the efficiency of conductive PEF/Ag NWs film in fabricating efficient flexible organic thin-film transistor and organic photovoltaic (OPV) is demonstrated. The OPV device achieves a power conversion efficiency of 6.7%, which is superior to the device based on ITO/PEN device, manifesting the promising merit of the bio-based PEF for flexible electronic applications.