Injection-on-Skin Granular Adhesive for Interactive Human-Machine Interface

Biphase Ionic Hydrogels with Ultrasoftness and High Conductivity for Bio-Ionotronics

Achieving stable bioelectronic interfaces is hindered by inherent mechanical-electrochemical mismatches, limiting long-term device functionality in dynamic tissues. Current hydrogel-based bio-ionotronic devices face a fundamental trade-off: soft hydrogels lack sufficient ionic carriers, while ionic hydrogels compromise softness due to high cross-linking density. Here, we developed a biphasic ionic hydrogel (BIH) by integrating microgel-rich ionic reservoirs (microgel phase) into a continuous hydrogel matrix (CH phase) via hydrogen bonds. The microgel phase and CH phase of BIH work synergistically, reducing cross-linking density while maintaining the ion monomer content of the hydrogel. This synergistic structure decouples ionic storage from mechanical compliance, enabling ultrasoftness (2 kPa) and high ionic conductivity (8.55 S m-1), surpassing conventional ionic hydrogels. By tuning the microgel content, we increased the polymer network's characteristic length, facilitating ion diffusion while maintaining structural integrity and reducing interfacial impedance. Demonstrations in real-time electromyography and mechanical motion sensing validated its potential for soft bioelectronics.

Boosting hydrogel conductivity via water-dispersible conducting polymers for injectable bioelectronics

Bioelectronic devices hold transformative potential for healthcare diagnostics and therapeutics. Yet, traditional electronic implants often require invasive surgeries and  are mechanically incompatible with biological tissues. Injectable hydrogel bioelectronics offer a minimally invasive alternative that interfaces with soft tissue seamlessly. A major challenge is the low conductivity of bioelectronic systems, stemming from poor dispersibility of conductive additives in hydrogel mixtures. We address this issue by engineering doping conditions with hydrophilic biomacromolecules, enhancing the dispersibility of conductive polymers in aqueous systems. This approach achieves a 5-fold increase in dispersibility and a 20-fold boost in conductivity compared to conventional methods. The resulting conductive polymers are molecularly and in vivo degradable, making them suitable for transient bioelectronics applications. These additives are compatible with various hydrogel systems, such as alginate, forming ionically cross-linkable conductive inks for 3D-printed wearable electronics toward high-performance physiological monitoring. Furthermore, integrating conductive fillers with gelatin-based bioadhesive hydrogels substantially enhances conductivity for injectable sealants, achieving 250% greater sensitivity in pH sensing for chronic wound monitoring. Our findings indicate that hydrophilic dopants effectively tailor conducting polymers for hydrogel fillers, enhancing their biodegradability and expanding applications in transient implantable biomonitoring.

Reusable Liquid Metal-Based Hierarchical Hydrogels with Multifunctional Sensing Capability for Electrophysiology Electrode Substitution

Electrophysiological electrode patches are often used to collect surface electrophysiological signals to monitor and evaluate human health. However, commercial Ag/AgCl gels are very susceptible to electrode-skin interface interference during rehabilitation exercises and cannot achieve a stable collection of electrophysiological signals. In order to solve this challenge, this paper designed a liquid metal-based hierarchical hydrogel, which has a series of great performances, including adhesion to various substrates, efficient self-healing ability, excellent stretchability, and conductivity. Due to the hydrogel's unique rheological and adhesive properties, a conformal electrode/skin interface was generated, thus enabling stable electrophysiological signal acquisition during exercise. In addition, the strain sensor assembled based on the conductive hydrogel can sensitively monitor human limb movements in real time and can even be used for remote intelligent gesture recognition. Therefore, this work provides scientific guidance for developing a next generation of intelligent hydrogels with personal health surveillance, rehabilitation training monitoring, and wearable human-machine interaction.

Nature-inspired surface modification strategies for implantable devices

Medical and implantable devices are essential instruments in contemporary healthcare, improving patient quality of life and meeting diverse clinical requirements. However, ongoing problems such as bacterial colonization, biofilm development, foreign body responses, and insufficient device-tissue adhesion hinder the long-term effectiveness and stability of these devices. Traditional methods to alleviate these issues frequently prove inadequate, necessitating the investigation of nature-inspired alternatives. Biomimetic surfaces, inspired by the chemical and physical principles found in biological systems, present potential opportunities to address these challenges. Recent breakthroughs in manufacturing techniques, including lithography, vapor deposition, self-assembly, and three-dimensional printing, now permit precise control of surface properties at the micro- and nanoscale. Biomimetic coatings can diminish inflammation, prevent bacterial adherence, and enhance stable tissue integration by replicating the antifouling, antibacterial, and adhesive properties observed in creatures such as geckos, mussels, and biological membranes. This review emphasizes the cutting-edge advancements in biomimetic surfaces for medical and implantable devices, outlining their design methodologies, functional results, and prospective clinical applications. Biomimetic coatings, by integrating biological inspiration with advanced surface engineering, have the potential to revolutionize implantable medical devices, providing safer, more lasting, and more effective interfaces for prolonged patient benefit.

Multifunctional Hydrogel Electronics for Synergistic Therapy and Visual Monitoring in Wound Healing

To overcome the limitations of precise monitoring and inefficient wound exudate management in wound healing, an advanced multifunctional hydrogel electronics (MHE) platform based on MXene@MOF/Fe3O4@C photonic crystal hydrogel is developed. This platform combines optical/electrical sensing, synergistic therapy, and real-time visual monitoring into a single, efficient system, offering a comprehensive solution for wound healing. Under photothermal stimulation, the hydrogel releases metal ions that generate hydroxyl radicals, effectively eliminating antibiotic-resistant bacteria. Beyond its antibacterial efficacy, this system offers unprecedented real-time monitoring through temperature-responsive visualization, while structural color changes upon wound exudate absorption provide a clear indication for dressing replacement. By integrating these functionalities, MHE platform allows for precise control of the therapeutic process, significantly improving wound healing and treatment monitoring. The platform's optical/electrical sensing capabilities further broaden its potential applications across other biomedical fields. This breakthrough technology provides clinicians with a powerful tool to optimize therapeutic outcomes, marking a major advancement in wound care and biomedical applications.

Robust skin-integrated conductive biogel for high-fidelity detection under mechanical stress

Soft conductive gels are essential for epidermal electronics but often face challenges when interfacing with uneven surfaces or areas with extensive hair, especially under mechanical stress. In this study, we employed the concept of liquid-to-solid transformation to enhance integration at biointerfaces and designed an in-situ biogel capable of rapidly transitioning between liquid and solid states within 3 min via a temperature switch. The biogel features a semi-interpenetrating polymer network design and dual conduction pathways, resulting in high tensile strength (~1-3 MPa), a skin-compatible modulus (~0.3-1.1 MPa), strong skin adhesive strength (~1 MPa), and superior signal-to-noise ratio (SNR, ~30-40 dB). The biogel demonstrates significant performance in mechanically demanding environments, showing potential for accurately capturing outdoor exercise data, monitoring muscle recovery from sports-induced fatigue, and in vivo monitoring of cardiac physiological signals. The liquid-to-solid transformation concept, coupled with the design strategy for highly integrated and stable soft conductive materials, provides a basis for advancing conductive interface designs for high-fidelity signal acquisition.

Nerve-Mimetic Adhesive Hydrogel Electroceuticals: Tailoring In Situ Physically Entangled Domains in Singular Polymers

Implantable electrochemicals stand out as promising candidates for resolving peripheral nerve injuries. However, challenges persist in designing bioelectronic materials that mimic tissue due to modulus matching, conformal adhesion, and immune responses. Herein, we present a nerve-mimicking design rationale for biocompatible hydrogel-based electroceuticals with a tissue-like modulus, robust and conformal tissue adhesion, exceptional mechanical toughness, and efficient stress dissipation. Inspired by the hierarchical structure of the peripheral nerve, the hydrogel substrate features a structurally gradient bilayer transitioning from a dense to a loose polymeric network, utilizing alginate functionalized with either photo-cross-linkable methacrylate or tissue-adhesive phenylborate. Due to the varying water affinity of the tethering groups, a physically entangled interfacial domain is in situ formed during dehydration of the pre-gel film, resulting in enhanced mechanical toughness and strong adhesion. The hydrogel electroceuticals, when integrated with conducting polymeric electrodes, locally stimulate nerve tissue, improving tissue regeneration in a crushed nerve injury model.

Myelin Sheath-Inspired Hydrogel Electrode for Artificial Skin and Physiological Monitoring

Significant advancements in hydrogel-based epidermal electrodes have been made in recent years. However, inherent limitations, such as adaptability, adhesion, and conductivity, have presented challenges, thereby limiting the sensitivity, signal-to-noise ratio (SNR), and stability of the physiological-electrode interface. In this study, we propose the concept of myelin sheath-inspired hydrogel epidermal electronics by incorporating numerous interpenetrating core-sheath-structured conductive nanofibers within a physically cross-linked polyelectrolyte network. Poly(3,4-ethylenedioxythiophene)-coated sulfonated cellulose nanofibers (PEDOT:SCNFs) are synthesized through a simple solvent-catalyzed sulfonation process, followed by oxidative self-polymerization and ionic liquid (IL) shielding steps, achieving a low electrochemical impedance of 42 Ω. The physical associations within the composite hydrogel network include complexation, electrostatic forces, hydrogen bonding, π-π stacking, hydrophobic interaction, and weak entanglements. These properties confer the hydrogel with high stretchability (770%), superconformability, self-adhesion (28 kPa on pigskin), and self-healing capabilities. By simulating the saltatory propagation effect of the nodes of Ranvier in the nervous system, the biomimetic hydrogel establishes high-fidelity epidermal electronic interfaces, offering benefits such as low interfacial contact impedance, significantly increased SNR (30 dB), as well as large-scale sensor array integration. The advanced biomimetic hydrogel holds tremendous potential for applications in electronic skin (e-skin), human-machine interfaces (HMIs), and healthcare assessment devices.

Granular Hydrogels Improve Myogenic Invasion and Repair after Volumetric Muscle Loss

Skeletal muscle injuries including volumetric muscle loss (VML) lead to excessive tissue scarring and permanent functional disability. Despite its high prevalence, there is currently no effective treatment for VML. Bioengineering interventions such as biomaterials that fill the VML defect to support cell and tissue growth are a promising therapeutic strategy. However, traditional biomaterials developed for this purpose lack the pore features needed to support cell infiltration. The present study investigates for the first time, the impact of granular hydrogels on muscle repair - hypothesizing that their flowability will permit conformable filling of the defect site and their inherent porosity will support the invasion of native myogenic cells, leading to effective muscle repair. Small and large microparticle fragments are prepared from photocurable hyaluronic acid polymer via extrusion fragmentation and facile size sorting. In assembled granular hydrogels, particle size and degree of packing significantly influence pore features, rheological behavior, and injectability. Using a mouse model of VML, it is demonstrated that, in contrast to bulk hydrogels, granular hydrogels support early-stage (satellite cell invasion) and late-stage (myofiber regeneration) muscle repair processes. Together, these results highlight the promising potential of injectable and porous granular hydrogels in supporting endogenous repair after severe muscle injury.

Transforming Commercial Polymers into Tough yet Switchable Adhesives by Trident Photoswitch Molecule Doping: Break Adhesion-Switchability Paradox

Here, a trident molecule doping strategy is introduced to overcome both cohesion-adhesion trade-off and adhesion-switchability conflict, transforming commercial polymers into tough yet photo-switchable adhesives. The strategy involves initial rational design of new trident photoswitch molecules namely TAzo-3 featuring azobenzene and hydroxy-terminated alkyl chains involved rigid-soft tri-branch structure, and subsequent doping into commercial polycaprolactone (PCL) via simple blending. Unique design enables TAzo-3 as a versatile dopant, not only regulating the internal and external supramolecular interaction to balance cohesion and interface adhesion for tough bonding, but also affording marked photothermal effect to facilitate rapid adhesive melting for great photo-switchability. Thus, the optimal TAzo-3-doped PCL (TAzo-3@P) displays markedly-improved bonding performance on diverse substrates compared to linear azobenzene-doped PCL and pure PCL. Impressively, TAzo-3@P on polymethyl methacrylate (PMMA) attains large room-temperature adhesion strength of 6.7 MPa - surpassing most reported adhesives and many commercial adhesives on PMMA, along with easy photo-induced detachment with remarkable switch ratio of 2.09 × 105. Besides, TAzo-3@P can also act as "permanent" adhesives for only adhesion, demonstrating excellent multi-reusability, anti-freezing and waterproof ability. Mechanism studies unveil that the switchable adhesion is closely linked with the dopant molecule structure while rigid-soft coupled trident structures and hydroxy-terminated alkyl chains are key factors.

Thermally Conductive and UV-EMI Shielding Electronic Textiles for Unrestricted and Multifaceted Health Monitoring

Skin-attachable electronics have garnered considerable research attention in health monitoring and artificial intelligence domains, whereas susceptibility to electromagnetic interference (EMI), heat accumulation issues, and ultraviolet (UV)-induced aging problems pose significant constraints on their potential applications. Here, an ultra-elastic, highly breathable, and thermal-comfortable epidermal sensor with exceptional UV-EMI shielding performance and remarkable thermal conductivity is developed for high-fidelity monitoring of multiple human electrophysiological signals. Via filling the elastomeric microfibers with thermally conductive boron nitride nanoparticles and bridging the insulating fiber interfaces by plating Ag nanoparticles (NPs), an interwoven thermal conducting fiber network (0.72 W m-1 K-1) is constructed benefiting from the seamless thermal interfaces, facilitating unimpeded heat dissipation for comfort skin wearing. More excitingly, the elastomeric fiber substrates simultaneously achieve outstanding UV protection (UPF = 143.1) and EMI shielding (SET > 65, X-band) capabilities owing to the high electrical conductivity and surface plasmon resonance of Ag NPs. Furthermore, an electronic textile prepared by printing liquid metal on the UV-EMI shielding and thermally conductive nonwoven textile is finally utilized as an advanced epidermal sensor, which succeeds in monitoring different electrophysiological signals under vigorous electromagnetic interference. This research paves the way for developing protective and environmentally adaptive epidermal electronics for next-generation health regulation.