Increasing the Reactivity of Amides towards Organometallic Reagents: An Overview

A General Direct Aldehyde C-H Alkylation via TBADT-Nickel Synergistic Catalysis

Herein, we present a nickel/tetrabutylammonium decatungstate (TBADT)-catalyzed protocol for general C-H alkylation of aldehydes, enabling the efficient synthesis of aliphatic ketones through ligand-controlled cross-coupling. This mild and cost-effective methodology demonstrates broad substrate compatibility with various commercially available aldehydes and both activated and unactivated alkyl bromides, delivering target products in high yields. Notably, the practical utility of this catalytic system has been highlighted through a concise two-step synthesis of the commercially valuable musk odorant Aurelione from readily available starting materials.

Total Synthesis of Isodaphlongamine H by Iridium-Catalyzed Reductive [3 + 2] Cycloaddition of N-Hydroxylactam

The total synthesis of isodaphlongamine H based on a lactam strategy, which enables quick access to complex cyclic amines, is described. The strategy begins with alkylation of a chiral lactam and subsequent N-oxidation via an imino ether to afford the N-hydroxylactam. For the key transformation to functionalize the amide carbonyl, an iridium-catalyzed reductive [3 + 2] cycloaddition of the N-hydroxylactam provides a tricyclic isoxazolidine in a one-pot process. After the coupling reaction with an allylic silane fragment, the total synthesis is accomplished through intramolecular Hosomi-Sakurai allylation to construct a pentacyclic core. The deoxygenated pentacyclic intermediate shows higher cytotoxicity against HeLa and U937 cell lines than isodaphlongamine H, and might become a lead compound for further biological study.

Catalytic Reductive Amination and Tandem Amination-Alkylation of Esters Enabled by a Cationic Iridium Complex

Reported herein is a convenient and efficient method for one-pot, catalytic reductive amination, as well as the first multi-component tandem reductive amination-functionalization of bench-stable and readily available common carboxylic esters. This method is based on the cationic [Ir(COD)2]BArF-catalyzed chemoselective hydrosilylation of esters, followed by one-pot acid-mediated amination and nucleophilic addition. The reaction was conducted under mild conditions at a very low catalyst loading (0.1 mol % of Ir), which could be further reduced to 0.001 mol %, as demonstrated by a reaction at a 15 g scale. The method is highly versatile, allowing the use of esters with or without α-protons for the N-mono-alkylation of primary and secondary amines to produce diverse secondary and tertiary amines, as well as α-branched/functionalized amines. The method is highly chemoselective and tolerates a variety of functional groups such as bromo, trifluoromethyl, ester, and cyano groups. The value of the method was demonstrated by the one-step catalytic synthesis of two bio-relevant N-mono-methyl α-amino esters and the antiparkinsonian agent piribedil, as well as by the use of two shorter chain triglycerides as alkylating feedstock.

Highly Stereoselective Synthesis of α-Oxoketene N,X-Acetals (X = O, S, or N) under Mild Conditions

A straightforward synthesis of α-oxoketene N,X-acetals (X = O, S, or N) from β-oxoamides has been described. The oxyphosphonium intermediates are quickly generated in situ from β-oxoamides in the presence of Hendrickson reagent and triflic anhydride (Tf2O) in a chemoselective manner and undergo a chemoselective nucleophilic substitution with phenols, thiophenols, or aromatic amines to deliver the desired products with high stereoselectivity. The one-pot synthetic protocol features readily available starting materials, mild conditions, simple execution, and a wide range of synthetic potentials of the products.

A General Access to Aryl-Alkyl Ketones via Nickel-Catalyzed Carbonylative Reductive Cross-Coupling Reactions

Transition-metal-catalyzed carbonylation reactions have emerged as a versatile and powerful strategy for the production of diverse value-added carbonyl-containing compounds. Nevertheless, the carbonylative synthesis of alkyl ketones, particularly those incorporating secondary or tertiary alkyl fragments, remains underexplored and poses significant challenges. Herein, we present a nickel-catalyzed carbonylative reductive cross-coupling reaction to synthesize a wide range of aryl-alkyl ketones from readily available alkyl halides, aryl iodides, and Mo(CO)6. This protocol exhibits excellent compatibility with primary, secondary, and tertiary alkyl electrophiles as well as aryl electrophiles bearing electron-withdrawing or electron-donating groups, offering a general access to aryl-alkyl ketones under mild conditions. Mechanistic studies reveal that Mo(CO)6 not only serves as a safe and effective CO surrogate, but also plays a crucial role in facilitating the nickel carbonyl species, which is critical for promoting the selective synthesis of aryl-alkyl ketones.

Divergent alkynylative difunctionalization of amide bonds through C-O deoxygenation versus C-N deamination

The transformation and utilization of amides are significant in organic synthesis and drug discovery. Here we demonstrate a divergent alkynylative difunctionalization of amides in a single transformation. In this reaction, amides react with an organometallic nucleophile to form a tetrahedral intermediate. By altering the N-substitution or the acyl group, the tetrahedral intermediate species selectively undergoes C-O or C-N cleavage with a concomitant capture by an alkynyl nucleophile generated in situ. This process enables the selective introduction of two different functional groups into the amide molecular architecture, producing valuable propargyl amine and propargyl alcohol products. The selectivity between deoxygenation and deamination process has been further elucidated by DFT calculations. Overall, this reaction successfully transforms the traditional mode of nucleophilic acyl addition to amides to a divergent C-O/C-N cleavage. The particularly wide substrate scope, including late-stage modification of bioactive molecules, demonstrates its potential broad applications in organic synthesis.

Reaction of Donor-Acceptor α-Diazo Esters and N,N-Dimethylformamide/γ-Lactams To Generate α-Amino-α-aroylethanoates

Herein, we present a metal-free, concise, and efficient protocol for the intermolecular reaction of amides (lactams) with donor-acceptor α-diazo esters to afford the functionalized α-amino-α-aroylethanoates. N-Methyl-2-pyrrolidone (NMP) and N,N-dimethylformamide (DMF) are employed as both reagents and solvents, allowing for the incorporation of all units into the products. The reaction is processed by the ester group migration and compatible with a broad range of substrates up to 50 examples.

Merging SOMO activation with transition metal catalysis: Deoxygenative functionalization of amides to β-aryl amines

Singly occupied molecular orbital (SOMO) activation of in situ generated enamines has achieved great success in (asymmetric) α-functionalization of carbonyl compounds. However, examples on the use of this activation mode in the transformations of other functional groups are rare, and the combination of SOMO activation with transition metal catalysis is still less explored. In the area of deoxygenative functionalization of amides, intermediates such as iminium ions and enamines were often generated in situ to result in the formation of α-functionalized amines. In contrast, the direct deoxygenation of amides to β-functionalized amines is highly appealing yet remains scarcely investigated. Here, a deoxygenative arylation of amides with aryl halides was developed via multicatalysis of iridium/photoredox/nickel/iridium, affording β-aryl amines in high efficiency. The key to the success of this reaction is the SOMO activation of enamine in synergy with a Ni-catalyzed arylation, which is in conjunction with two compatible Ir-catalyzed reduction processes.

Nontargeted Analysis of Reactive Nitrogenous Compounds in Suwannee River Standard Reference Materials and Authentic River Water Samples

Concerns over toxic nitrogenous disinfection byproducts (N-DBPs) necessitate identifying their precursors in source water. Natural organic amino compounds are known precursors to N-DBPs. Three Suwannee River (SR) standard reference materials (SRMs), humic acids (HA), fulvic acids (FA), and natural organic matter (NOM), are commonly used to study DBP formation, but the chemical makeup of amino compounds in SRSRMs remains largely unknown. To address this, we combined stable hydrogen/deuterium isotope labeling, HDPairFinder bioinformatics, and nontargeted high-performance liquid chromatography-high-resolution mass spectrometry (HPLC-HRMS) to characterize these compounds in SRSRMs. This method classifies reactive amines, provides accurate masses and MS/MS spectra, and quantifies intensities. We identified 2707 high-quality features with primary and/or secondary amines in SRSRMs and 75% of them having an m/z < 300. Across all three SRSRMs, 327 amino features were detected, while 856, 794, and 200 unique features were found in SRNOM, SRHA, and SRFA, respectively. In North Saskatchewan River (NSR) samples, a total of 6449 amino features were detected, 818 of them matched those in SRSRMs, and 87% of them were different between the two rivers. Using chemical standards, we confirmed 10 compounds and tentatively identified 5 more. This study highlights similarities and differences in reactive N-precursors in SRSRMs and local river water, enhancing the understanding of geo-differences in reactive N-precursors in different source waters.

The synthesis of alk-2-ynl Weinreb amides via Pd/Cu-catalysed oxidative carbonylation of terminal alkynes

Synthesis of alk-2-ynl-Weinreb amides via Pd-catalyzed oxidative carbonylation of terminal alkynes and N,O-dimethylhydroxylamine hydrochloride at room temperature under low CO/O2 pressure is reported for the first time. This protocol offers tolerance of various functional groups under mild reaction conditions. The protocol incorporates aromatic- and aliphatic-substituted alkynes through a one-step oxidative carbonylative route toward desired alkynyl Weinreb amides, which are of considerable importance as valuable synthetic building blocks.

Stereodivergent synthesis of 2-oxo-oligopyrrolidines by an iterative coupling strategy

Natural linear polyamines play diverse roles in physiological processes by interacting with receptors at the cellular level. Herein, we describe the stereodivergent synthesis of oligopyrrolidines, which are conformationally constrained polyamines. We synthesized dimeric and trimeric 2-oxo-oligopyrrolidines using an iterative coupling strategy. The key to our success is an iridium-catalyzed trans/cis-selective nucleophilic addition and subsequent threo/erythro-stereoselective reduction. The synthesized pyrrolidines show varying cytotoxicities against a human cancer cell line depending on the number of rings and their stereochemistry.

Iridium-Catalyzed Reductive (3+2) Annulation of Lactams Enabling the Rapid Total Synthesis of (±)-Eburnamonine

A reductive (3+2) annulation of lactams through iridium-catalyzed hydrosilylation and photoredox coupling with α-bromoacetic acid was developed. The iridium-catalyzed hydrosilylation of the lactam carbonyl group and subsequent elimination provide a transient cyclic enamine, which undergoes iridium-catalyzed photoredox coupling with α-bromoacetic acid in a one-pot process. The developed conditions show high functional-group tolerance and provide cyclic N,O-acetals containing a quaternary carbon center. The resulting N,O-acetals undergo a variety of acid-mediated nucleophilic addition reactions via iminium ions to give substituted cyclic amines. The developed sequence including reductive (3+2) annulation and acid-mediated nucleophilic addition was successfully applied to the four-step total synthesis of (±)-eburnamonine.

Catalytic enantioselective reductive alkynylation of amides enables one-pot syntheses of pyrrolidine, piperidine and indolizidine alkaloids

The primary objective in synthetic organic chemistry is to develop highly efficient, selective, and versatile synthetic methodologies, which are essential for discovering new drug candidates and agrochemicals. In this study, we present a unified strategy for a one-pot, catalytic enantioselective synthesis of α-alkyl and α,α'-dialkyl pyrrolidine, piperidine, and indolizidine alkaloids using readily available amides and alkynes. This synthesis is enabled by the identification and development of an Ir/Cu/N-PINAP catalyzed highly enantioselective and chemoselective reductive alkynylation of α-unbranched aliphatic amides, which serves as the key reaction. This reaction is combined with Pd-catalyzed tandem reactions in a one-pot approach, enabling the collective, catalytic enantioselective total syntheses of eight alkaloids and an anticancer antipode with 90-98% ee. The methodology's enantio-divergence is exemplified by the one-step access to either enantiomer of alkaloid bgugaine.

Base-mediated homologative rearrangement of nitrogen-oxygen bonds of N-methyl-N-oxyamides

Due to the well known reactivity of C(O)-N functionalities towards canonical C1-homologating agents (e.g. carbenoids, diazomethane, ylides), resulting in the extrusion of the N-centered fragment en route to carbonyl compounds, formal C1-insertions within N-O bonds still remain obscure. Herein, we document the homologative transformation of N-methyl-N-oxyamides - with high tolerance for diverse O-substituents - into N-acyl-N,O-acetals. Under controlled basic conditions, the N-methyl group of the same starting materials acts as a competent precursor of the methylene synthon required for the homologation. The logic is levered on the formation of an electrophilic iminium ion (via N-O heterolysis) susceptible to nucleophilic attack by the alkoxide previously expulsed. The procedure documents genuine chemocontrol and flexibility, as judged by the diversity of substituents placed on both amide and nitrogen linchpins. The mechanistic rationale was validated through experiments conducted on D-labeled materials which unambiguously attributed the origin of the methylene fragment to the N-methyl group of the starting compounds.

Electrochemically enabled decyanative C(sp3)-H oxygenation of N-cyanomethylamines to formamides

Selective oxygenation of C(sp³)-H bonds adjacent to nitrogen atoms is a highly attractive strategy for synthesizing various formamide derivatives while preserving the substrate skeletons. Herein, an environmentally benign electrochemically enabled decyanative C(sp³)-H oxygenation of N-cyanomethylamines using H₂O as a carbonyl oxygen atom source is described, leading to the synthesis of a large class of formamides in good to excellent yields with a broad substrate scope under metal- and oxidant-free conditions. This electrochemical technology highlights the facile incorporation of N-formyl into some important bioactive molecules.

Mild Divergent Semireductive Transformations of Secondary and Tertiary Amides via Zirconocene Hydride Catalysis

The mild catalytic partial reduction of amides to imines has proven to be a challenging synthetic transformation, with many transition metals directly reducing these substrates to amines. Herein, we report a mild, catalytic method for the semireduction of both secondary and tertiary amides via zirconocene hydride catalysis. Utilizing just 5 mol % of Cp2ZrCl2, the reductive deoxygenation of secondary amides is demonstrated to furnish a diverse array of imines in up to 94% yield with excellent chemoselectivity and without the need for glovebox handling. Moreover, a novel reductive transamination of tertiary amides is also achievable when the catalytic protocol is carried out in the presence of a primary amine at room temperature, providing access to an expanded assortment of imines in up to 98% yield. Through slight procedural tuning, the single-flask conversion of amides to imines, aldehydes, amines or enamines is feasible, including multicomponent syntheses.

Synthesis of isolable β-chloroenamines from N-alkoxylactams with organometallic reagents

An efficient approach to access isolable β-chloroenamines via nucleophilic addition/dehydration of α-chloro N-alkoxylactam with organolithium and Grignard reagents is reported. This approach is amenable to the synthesis of β-chloroenamines by incorporating various C(sp) and C(sp²) units, such as alkyne, aryl, and heteroaryl moieties. The sequential reaction has a broad substrate scope and can be carried out for a scalable synthesis of β-chloroenamines. Control experiments suggested that both chloro and alkoxy groups act as inductive electron-withdrawing substituents to improve the stability of the enamines.

α-Aminocarbene-Mediated Si-H Insertion: Deoxygenative Silylation of Aromatic Amides with Silanes

While metal carbene-mediated Si-H insertion reactions have become a powerful strategy to build new C-Si bonds, the utilization of α-aminocarbene intermediates generated from readily available precursors in the Si-H insertion reaction remains a longstanding challenge. Herein, we develop a practical and general strategy to synthesize α-aminosilanes through a deoxygenative cross-coupling of amides and silanes mediated by Sm/SmI₂. Given the simplicity and versatility, this methodology represents a fascinating example for the effective utilization of inert amides as α-aminocarbene precursors in organic synthesis.

Multicatalysis protocol enables direct and versatile enantioselective reductive transformations of secondary amides

The catalytic asymmetric geminal bis-nucleophilic addition to nonreactive functional groups is a type of highly desirable yet challenging transformation in organic chemistry. Here, we report the first catalytic asymmetric reductive/deoxygenative alkynylation of secondary amides. The method is based on a multicatalysis strategy that merges iridium/copper relay catalysis with organocatalysis. A further combination with the palladium-catalyzed alkyne hydrogenation allows the one-pot enantioselective reductive alkylation of secondary amides. This versatile protocol allows the efficient synthesis of four types of α-branched chiral amines, which are prevalent structural motifs of active pharmaceutical ingredients. The protocol also features excellent enantioselectivity, chemoselectivity, and functional group tolerance to be compatible with more reactive functional groups such as ketone and aldehyde. The synthetic utility of the method was further demonstrated by the late-stage functionalization of two drug derivatives and the concise, first catalytic asymmetric approach to the κ-opioid antagonist aticaprant.

N-Hydroxyethyl acrylamide as a functional eROP initiator for the preparation of nanoparticles under "greener" reaction conditions

N-Hydroxyethyl acrylamide was used as a functional initiator for the enzymatic ring-opening polymerisation of ε-caprolactone and δ-valerolactone. N-Hydroxyethyl acrylamide was found not to undergo self-reaction in the presence of Lipase B from Candida antarctica under the reaction conditions employed. By contrast, this is a major problem for 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate which both show significant transesterification issues leading to unwanted branching and cross-linking. Surprisingly, N-hydroxyethyl acrylamide did not react fully during enzymatic ring-opening polymerisation. Computational docking studies helped us understand that the initiated polymer chains have a higher affinity for the enzyme active site than the initiator alone, leading to polymer propagation proceeding at a faster rate than polymer initiation leading to incomplete initiator consumption. Hydroxyl end group fidelity was confirmed by organocatalytic chain extension with lactide. N-Hydroxyethyl acrylamide initiated polycaprolactones were free-radical copolymerised with PEGMA to produce a small set of amphiphilic copolymers. The amphiphilic polymers were shown to self-assemble into nanoparticles, and to display low cytotoxicity in 2D in vitro experiments. To increase the green credentials of the synthetic strategies, all reactions were carried out in 2-methyl tetrahydrofuran, a solvent derived from renewable resources and an alternative for the more traditionally used fossil-based solvents tetrahydrofuran, dichloromethane, and toluene.

Ir-Catalyzed Chemoselective Reductive Condensation Reactions of Tertiary Amides with Active Methylene Compounds

The catalytic reductive condensation reactions of tertiary amides with active methylene compounds leading to multifunctionalized non-N-containing products is described. The reactions proceed through sequential iridium-catalyzed hydrosilylation of the amides followed by acid-mediated condensation with the active methylene compounds. This scalable method is broad in scope and shows remarkable chemoselectivity for the amide group in the presence of several sensitive or even more reactive functionalities such as ester, cyano, nitro, silyl dienol ether, and ketone.

Difluoroalkylation of Tertiary Amides and Lactams by an Iridium-Catalyzed Reductive Reformatsky Reaction

An iridium-catalyzed, reductive alkylation of abundant tertiary lactams and amides using 1-2 mol % of Vaska's complex (IrCl(CO)(PPh3)2), tetramethyldisiloxane (TMDS), and difluoro-Reformatsky reagents (BrZnCF2R) for the general synthesis of medicinally relevant α-difluoroalkylated tertiary amines is described. A broad scope (46 examples), including N-aryl- and N-heteroaryl-substituted lactams, demonstrated an excellent functional group tolerance. Furthermore, late-stage drug functionalizations, a gram-scale synthesis, and common downstream transformations proved the potential synthetic relevance of this new methodology.

D. dos Santos AC, Kohlhepp SV, Mendoza A. Direct Addition of Grignard Reagents to Aliphatic Carboxylic Acids Enabled by Bulky turbo-Organomagnesium Anilides

The synthesis of ketones through addition of organometallic reagents to aliphatic carboxylic acids is a straightforward strategy that is limited to organolithium reagents. More desirable Grignard reagents can be activated and controlled with a bulky aniline-derived turbo-Hauser base. This operationally simple procedure allows the straightforward preparation of a variety of aliphatic and perfluoroalkyl ketones alike from functionalized alkyl, aryl and heteroaryl Grignard reagents.

Fe(iii)-catalysed selective C–N bond cleavage of N-phenylamides by an electrochemical method

An Fe(iii)-catalysed transformation of secondary N-phenyl substituted amides to primary amides by an electrochemical method is developed. Regioselective aryl C–H oxygenation occurs during the reaction, promoting selective C(phenyl)-N bond cleavage to form primary amides in yields of up to 92%.

An Fe(iii)-catalysed transformation of secondary N-phenyl substituted amides to primary amides by an electrochemical method is developed.

Tandem Catalysis Enabled Highly Chemoselective Deoxygenative Alkynylation and Alkylation of Tertiary Amides: A Versatile Entry to Functionalized α-Substituted Amines

We report here the highly chemoseive catalytic reductive alkynylation and reductive alkylation of tertiary amides to give propargylamines and α-branched amines, respectively. The method features a tandem iridium (Vaska’s complex)-catalyzed...

Iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides for synthesis of α-tertiary amines

A protocol for the synthesis of α-tertiary amines was developed by iterative addition of carbon nucleophiles to N,N-dialkyl carboxamides. Nucleophilic 1,2-addition of organolithium reagents to carboxamides forms anionic tetrahedral carbinolamine (hemiaminal) intermediates, which are subsequently treated with bromotrimethylsilane (Me₃SiBr) followed by organomagnesium (Grignard) reagents, organolithium reagents or tetrabutylammonium cyanide, affording α-tertiary amines. Employment of (trimethylsilyl)methylmagnesium bromide as the 2^nd nucleophile allowed for aza-Peterson olefination of the resulting α-tertiary (trimethylsilyl)methylamines with acidic work-up, resulting in the formation of 1,1-diarylethylenes.

Tf2O/TTBP (2,4,6-Tri-tert-butylpyrimidine): An Alternative Amide Activation System for the Direct Transformations of Both Tertiary and Secondary Amides

Ten types of Tf₂O/TTBP-mediated amide transformation reactions were investigated. The results showed that compared with pyridine derivatives 2,6-di-tert-butyl-4-methylpyridine (DTBMP) and 2-fluoropyridine (2-F-Pyr.), TTBP can serve as an alternative amide activation system for the direct transformation of both secondary and tertiary amides. For most surveyed examples, higher or comparable yields were generally obtained. In addition, Tf₂O/TTBP combination was used to promote the condensation reactions of 2-(tert-butyldimethylsilyloxy)furan (TBSOF) with both tertiary and secondary amides, the one-pot reductive Bischler-Napieralski-type reaction of tertiary lactams, and Movassaghi and Hill's modern version of the Bischler-Napieralski reaction. The value of the Tf₂O/TTBP-based methodology was further demonstrated by the concise and high-yielding syntheses of several natural products.

Selective Electrochemical Oxidation of Functionalized Pyrrolidines

A method for the selective electrochemical aminoxyl-mediated Shono-type oxidation of pyrrolidines to pyrrolidinones is described. These transformations show the high selectivity and functional group compatibility. This chemistry also demonstrates the use of an operationally simple ElectraSyn 2.0 and cost-effective stainless-steel electrode for the electrochemical oxidation of functionalized pyrrolidines.

Asymmetric Deoxygenative Alkynylation of Tertiary Amides Enabled by Iridium/Copper Bimetallic Relay Catalysis

A variety of inert tertiary amides have been successfully transformed into synthetically important chiral propargylamines in high yields with good to excellent enantioselectivities via a relayed sequence of Ir catalyzed partial reduction and Cu/GARPHOS catalyzed asymmetric alkynylation with terminal alkynes. The reaction was readily extended to some drug molecules and the transformations of representative products have been demonstrated, thus attesting the practical utilities and the robust nature of the protocol.

Direct alkylation of N,N-dialkyl benzamides with methyl sulfides under transition metal-free conditions

Amides are a fundamental and widespread functional group, and are usually considered as poor electrophiles owing to resonance stabilization of the amide bond. Various approaches have been developed to address challenges in amide transformations. Nonetheless, most methods use activated amides, organometallic reagents or transition metal catalysts. Here, we report the direct alkylation of N,N-dialkyl benzamides with methyl sulfides promoted by the readily available base LDA (lithium diisopropylamide). This approach successfully achieves an efficient and selective synthesis of α-sulfenylated ketones without using transition-metal catalysts or organometallic reagents. Preliminary mechanism studies reveal that the deprotonative aroylation of methyl sulfides is promoted by the directed ortho-lithiation of the tertiary benzamide with LDA.

Continuous Flow Acylation of (Hetero)aryllithiums with Polyfunctional N,N-Dimethylamides and Tetramethylurea in Toluene

The continuous flow reaction of various aryl or heteroaryl bromides in toluene in the presence of THF (1.0 equiv) with sec -BuLi (1.1 equiv) provided at 25 °C within 40 sec the corresponding aryllithiums which were acylated with various functionalized N,N-dimethylamides including easily enolizable amides at -20 °C within 27 sec, producing highly functionalized ketones in 48-90% yield (36 examples). This method was well suited for the preparation of α-chiral ketones such as naproxene and ibuprofen derived ketones with 99% ee . A one-pot stepwise bis-addition of two different lithium organometallics to 1,1,3,3-tetramethyurea (TMU) provided unsymmetrical ketones in 69-79% yield (9 examples).

Merging Electron Transfer with 1,2-Metalate Rearrangement: Deoxygenative Arylation of Aromatic Amides with Arylboronic Esters

Amides are essentially inert carboxyl derivatives in many types of chemical transformations. In particular, deoxygenative C-C bond formation of amides to synthetically important amines is a long-standing challenge for synthetic chemists due to the inertness of the resonance-stabilized amide C=O bond. Herein, it is disclosed that by merging electron-transfer-induced activation with 1,2-metalate rearrangement, a wide range of aromatic amides react smoothly with arylboron reagents, affording a series of biologically relevant diarylmethylamines as deoxygenative C-C bond cross-coupling products. With its simplicity and versatility, this reaction shows great promise in the synthesis of amines from amides, which may open up new avenues in retrosynthetic planning and find widespread use in academia and industry.

Reductive Functionalization of Amides in Synthesis and for Modification of Bioactive Compounds

In this review, applications of the amide reductive functionalization methodology for the synthesis and modification of bioactive compounds are covered. A brief summary of the different protocols is presented in the introduction, followed by the synthetic application of these in late-stage functionalization, leading to known pharmaceuticals or to their derivatives, including bioisosteres, with potential higher activity as the main axis of the article. The synthetic approach to natural products based on amide reduction is also discussed; however, this is given in a condensed form focusing on recent or as yet unexplored applications due to a number of recently published excellent reviews covering this topic. The aim of this review is to illustrate the potential of reductive functionalization of amides as an elegant and useful tool in the synthesis of bioactive compounds and inspire further work in this field.

Synthesis of biaryl ketones by arylation of Weinreb amides with functionalized Grignard reagents under thermodynamic control vs. kinetic control of N,N-Boc2-amides

A highly efficient method for chemoselective synthesis of biaryl ketones by arylation of Weinreb amides (N-methoxy-N-methylamides) with functionalized Grignard reagents is reported. This protocol offers rapid entry to functionalized biaryl ketones after Mg/halide exchange with i-PrMgCl·LiCl under operationally-simple and practical reaction conditions. The scope of the method is highlighted in >40 examples, including bioactive compounds and pharmaceutical derivatives. Collectively, this transition-metal-free approach offers a major advantage over the recently established cross-coupling of amides by oxidative addition of N-C(O) bonds. Considering the utility of amide acylation reactions in modern synthesis, we expect that this method will be of broad interest.