Surface-Modified Piezoelectric Copolymer Poly(vinylidene fluoride-trifluoroethylene) Supporting Physiological Extracellular Matrixes to Enhance Mesenchymal Stem Cell Adhesion for Nanoscale Mechanical Stimulation

There is an unmet clinical need to provide viable bone grafts for clinical use. Autologous bone, one of the most commonly transplanted tissues, is often used but is associated with donor site morbidity. Tissue engineering strategies to differentiate an autologous cell source, such as mesenchymal stromal cells (MSCs), into a potential bone-graft material could help to fulfill clinical demand. However, osteogenesis of MSCs can typically require long culture periods that are impractical in a clinical setting and can lead to significant cost. Investigation into strategies that optimize cell production is essential. Here, we use the piezoelectric copolymer poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE), functionalized with a poly(ethyl acrylate) (PEA) coating that drives fibronectin network formation, to enhance MSC adhesion and to present growth factors in the solid phase. Dynamic electrical cues are then incorporated, via a nanovibrational bioreactor, and the MSC response to electromechanical stimulation is investigated.

New Insights into Spin Coating of Polymer Thin Films in Both Wetting and Nonwetting Regimes

Spin coating is a common method for fabricating polymer thin films on flat substrates. The well-established Meyerhofer relationship between film thickness (h) and spin rate (ω), h ∝ ω^-1/2, enables the preparation of thin films with desired thickness by adjusting the spin rate and other experimental parameters. The 1/2 exponent has been verified by previous studies involving organic thin films prepared on silicon wafers. In this study, 88% and >99% hydrolyzed poly(vinyl alcohol) (PVOH) polymers were adsorbed and spin-coated from an aqueous solution onto four different substrates. The substrates were prepared by covalently attaching poly(dimethylsiloxane) (PDMS) of different molecular weights onto silicon wafers (SiO₂). Atomic force microscopy images indicate that the PVOH films transitioned from stable on SiO₂, to metastable, and then to unstable as PDMS molecular weight was increased. Notably, none of the polymer-substrate systems studied here exhibited the thickness-spin rate profile predicted by the Meyerhofer model. Based on the experimental results, a more general adsorption-deposition model is proposed that decouples the total spin-coated thickness into two components─the adsorbed thickness (h₁) and the spin-deposited thickness (h₂). The former accounts for polymer-substrate interactions, and the latter depends on polymer concentration and spin rate. In unstable systems, the exponents were found to be ∼0 because slip takes place at the solution-substrate interface during spin and the spin-deposited thickness is 0. In metastable and stable systems, a universal relationship between spin-deposited thickness and spin rate emerged, independent of the substrate type and polymer concentration for each polymer examined. Our findings indicate the importance of film stability and polymer-substrate interactions in the application of spin coating.

The giant staphylococcal protein Embp facilitates colonization of surfaces through Velcro-like attachment to fibrillated fibronectin

Staphylococcus epidermidis causes some of the most hard-to-treat clinical infections by forming biofilms: Multicellular communities of bacteria encased in a protective matrix, supporting immune evasion and tolerance against antibiotics. Biofilms occur most commonly on medical implants, and a key event in implant colonization is the robust adherence to the surface, facilitated by interactions between bacterial surface proteins and host matrix components. S. epidermidis is equipped with a giant adhesive protein, extracellular matrix-binding protein (Embp), which facilitates bacterial interactions with surface-deposited, but not soluble fibronectin. The structural basis behind this selective binding process has remained obscure. Using a suite of single-cell and single-molecule analysis techniques, we show that S. epidermidis is capable of such distinction because Embp binds specifically to fibrillated fibronectin on surfaces, while ignoring globular fibronectin in solution. S. epidermidis adherence is critically dependent on multivalent interactions involving 50 fibronectin-binding repeats of Embp. This unusual, Velcro-like interaction proved critical for colonization of surfaces under high flow, making this newly identified attachment mechanism particularly relevant for colonization of intravascular devices, such as prosthetic heart valves or vascular grafts. Other biofilm-forming pathogens, such as Staphylococcus aureus, express homologs of Embp and likely deploy the same mechanism for surface colonization. Our results may open for a novel direction in efforts to combat devastating, biofilm-associated infections, as the development of implant materials that steer the conformation of adsorbed proteins is a much more manageable task than avoiding protein adsorption altogether.

A usually harmless bacterium called Staphylococcus epidermidis lives on human skin. Sometimes it makes its way into the bloodstream through a cut or surgical procedure, but it rarely causes blood infections. It can, however, cause severe infections when it attaches to the surface of a medical implant like a pacemaker or an artificial replacement joint. It does this by forming a colony of bacteria on the implant’s surface called a biofilm, which protects the bacteria from destruction by the immune system or antibiotics.

Understanding how Staphylococcus epidermidis implant infections start is critical to preventing them. This information may help scientists develop infection-resistant implants or new treatments for implant infections. Scientists suspect that Staphylococcus epidermidis attaches to implants by binding to a human protein called fibronectin, which coats medical implants in the human body. Another protein on the surface of the bacteria, called Embp, facilitates the connection. But why the bacteria attach to fibronectin on implants, and not fibronectin molecules in the bloodstream, is unclear.

Now, Khan, Aslan et al. show that Embp forms a Velcro-like bond with fibronectin on the surface of implants. In the experiments, Khan and Aslan et al. used powerful microscopes to create 3-dimensional images of the interactions between Embp and fibronectin. The experiments showed that Embp's attachment site is hidden on the globe-shaped form of fibronectin circulating in the blood. But when fibronectin covers an implant surface, it forms a fibrous network, and Embp can attach to it with up to 50 Velcro-like individual connections. These many weak connections form a strong bond that withstands the force of blood pumping past.

The experiments show that the fibrous coating of fibronectin on implants makes them a hotspot for Staphylococcus epidermidis infections. Finding ways to block Embp from attaching to fibronectin on implants, or altering the form fibronectin takes on implants, may help prevent these infections. Many bacteria that form biofilms have an Embp-like protein. As a result, these discoveries may also help scientists develop prevention or treatment strategies for other bacterial biofilm infections.

Characterization of plasmatic proteins adsorption on poly(styrene sodium sulfonate) functionalized silicone surfaces

Proteins adsorption occurs spontaneously on biomaterial upon insertion within the body. The resulting protein layer influences biomaterial biocompatibility through enhanced bio-integration or, on the contrary, adverse reactions. Furthermore, upon adsorption, proteins can undergo modifications of their structure and, ultimately, their physicochemical properties and activity. Hence, the understanding of protein adsorption on implanted materials appears essential, as exemplified by silicone breast prostheses that might lead to serious health issues. Surface modifications with a bioactive polymer, poly(styrene sodium sulfonate)-polyNaSS, on a hydrophobic silicone surface that composes breast implants, have been successfully performed under UV irradiation by a radical surface polymerization. This strategy enhances cell biocompatibility and antibacterial features. Although detailed insights related to the mechanism are still scarce, polyNaSS is supposed to promote changes in the conformation and/or orientation of adsorbed plasma proteins, reducing the odd for a biofilm to form. The present work addresses more in-depth structural investigations of the adsorbed state of two plasma proteins: Bovine Serum Albumin (BSA), as a model protein, and fibronectin (FN), for its role in cell adhesion. Using Atomic force microscopy (AFM), we report that polyNaSS showed no significant impact on the BSA structure conversely to the FN one. However, imaging findings with AFM clearly outlined a change in the structural organization of FN, going from a nano fibrillar assembly with an average length of 130 nm to a globular one when the surface was grafted. Thus, it is highlighted that polyNaSS interacts specifically with FN. In addition, cell spreading assay of L929 fibroblasts on FN-coated surfaces with optical microscopy indicated no significant impact of the change in FN structure upon fibroblasts adhesion, which displayed active elongated shapes. The present features are crucial for understanding the cell adhesion mechanism induced by surface modification.

Materials-driven fibronectin assembly on nanoscale topography enhances mesenchymal stem cell adhesion, protecting cells from bacterial virulence factors and preventing biofilm formation

Post-operative infection is a major complication in patients recovering from orthopaedic surgery. As such, there is a clinical need to develop biomaterials for use in regenerative surgery that can promote mesenchymal stem cell (MSC) osteospecific differentiation and that can prevent infection caused by biofilm-forming pathogens. Nanotopographical approaches to pathogen control are being identified, including in orthopaedic materials such as titanium and its alloys. These topographies use high aspect ratio nanospikes or nanowires to prevent bacterial adhesion but these features also significantly reduce MSC adhesion and activity. Here, we use a poly (ethyl acrylate) (PEA) polymer coating on titanium nanowires to spontaneously organise fibronectin (FN) and to deliver bone morphogenetic protein 2 (BMP2) to enhance MSC adhesion and osteospecific signalling. Using a novel MSC-Pseudomonas aeruginosa co-culture, we show that the coated nanotopographies protect MSCs from cytotoxic quorum sensing and signalling molecules, enhance MSC adhesion and osteoblast differentiation and reduce biofilm formation. We conclude that the PEA polymer-coated nanotopography can both support MSCs and prevent pathogens from adhering to a biomaterial surface, thus protecting from biofilm formation and bacterial infection, and supporting osteogenic repair.

Engineered Full-Length Fibronectin-Hyaluronic Acid Hydrogels for Stem Cell Engineering

Mechanical cues induce a variety of downstream effects on cells, including the regulation of stem cell behavior. Cell fate is typically characterized on biomaterial substrates where mechanical and chemical properties can be precisely tuned; however, most of these substrates do not recapitulate the biological complexity of the extracellular matrix (ECM). Here, hydrogels are engineered for mechanobiological studies using two major components of the ECM: hyaluronic acid (HA) and fibronectin (FN). Rather than typical surface chemisorption of FN to substrates, the system contains full-length FN covalently crosslinked to HA throughout the hydrogel. The control over the mechanical properties of the hydrogel independent of the concentration of FN and the ability to culture viable cells either on top or encapsulated within the hydrogels are shown. Interestingly, human mesenchymal stem cells (MSCs) experience an increase in nuclear translocation of the yes-associated protein (YAP) to the nucleus when cultured on (2D) substrates with increasing amounts of FN while maintaining constant hydrogel stiffness. However, this FN dependence on nuclear YAP translocation is not observed for MSCs encapsulated in (3D) hydrogels. This work develops complex hydrogels that recapitulate features of the ECM for the control of stem cells in both 2D and 3D environments.