A Potential Checkmate to Lead: Bismuth in Organometal Halide Perovskites, Structure, Properties, and Applications

Highly stable bismuth-chloride perovskite X-ray direct detectors with an ultralow detection limit

The quest for highly sensitive and stable X-ray detectors has intensified, driven by diverse applications such as medical diagnostics and industrial inspection. Recent strides have been made in harnessing the potential of lead halide perovskites for radiation detection, thanks to their remarkable optoelectronic properties. However, the toxicity of Pb and intrinsic material instability restrict their practical applications as next-generation efficient detectors. Here, we have developed environment-friendly three-dimensional (3D) bismuth-chloride perovskites designed for highly sensitive and stable X-ray direct detection. By the introduction of monovalent Na+, one-dimensional (1D) Cs3Bi2Cl9 can be converted into high-quality 3D double perovskite Cs2NaBiCl6 characterized by excellent photophysical properties. Our investigation, combining X-ray photoelectron spectroscopy and temperature-dependent photoluminescence, reveals a modulated electronic dimension and a mitigated electron-phonon coupling effect in Cs2NaBiCl6. As such, the 3D Cs2NaBiCl6-based direct detectors achieve a high sensitivity of 354.5 μC Gy-1 cm-2 and an ultralow detection limit of 59.4 nGy s-1, with continuous on-off switching for 4500 s. Overall, our work provides a new direction for designing and developing lead-free perovskites to achieve highly sensitive X-ray detection with exceptional stability.

Tuning Optical and Electrical Transport Properties in Zero-Dimensional Bismuth-Based Halide Rb3Bi2I9 under High Pressure

Bismuth-based perovskite materials have attracted extensive attention due to their low toxicity and excellent optoelectronic properties. Herein, this investigation delves systematically into the influence of pressure on the structural stability, band gap evolution, and electrical transport properties of Rb3Bi2I9. With the pressure increase, the band gap of the specimen gradually diminishes, attaining an optimal semiconductor band gap of 1.34 eV at 12.8 GPa, accompanied by obvious piezochromism from red to black. A pressure-induced semiconductor-to-metal transition occurs at 15.8 GPa. Electrons serve as the principal charge carriers in electrical conduction, while grain boundary impedance dominates the impedance profile of the sample.

Lattice Manipulation with Di-Tertiary Ammonium Spacer in Bismuth Bromide Perovskite Directs Efficient Charge Transport and Suppressed Ion Migration for Photodetector Applications

Bismuth halide hybrid perovskites have emerged as promising alternatives to their lead halide homologs because of high chemical stability, low toxicity, and structural diversity. However, their advancements in optoelectronic field are plagued with poor charge transport, due to considerable microstrain triggered by bulky spacer. Herein, the di-tertiary ammonium spacer (N,N,N',N'-tetramethyl-1,4-butanediammonium, TMBD) is explored to direct stable 1D bismuth bromide lattice structure with relaxed microstrain. Compared to the primary pentamethylenediamine (PD)2+, the (TMBD)2+ adopting alternating alignment enables a unique H-bonds mode to distort the configuration of inorganic layers to form corner-sharing [BiBr5] near-regular chains with narrower bandgap, lower exciton binding energy, and reduced carrier-lattice interactions, thereby facilitating charge-carrier transport. Moreover, the (TMBD)2+ spacers largely suppress ion migration in perovskite lattice, as substantiated by the experimental and theoretical investigations. Consequently, (TMBD)BiBr5 single crystal photodetector delivers a 185-fold increase in current on/off ratio with respect to (PD)BiBr5 under white light irradiation, considerable responsivity (≈82.97 mA W-1), detectivity (≈8.06 ×1011 Jones) under weak light (0.02 mW cm-2) irradiation, in the top rank of the reported hybrid bismuth halide perovskites. This finding offers novel design criterion for high-performance lead-free perovskites.

Prospective Chalcohalide Perovskites: Pursuing (and Failing) the Synthesis of CsBiSCl2 Nanocrystals

Heavy pnictogen chalcohalides are often termed lead-free, perovskite-inspired materials. Despite theoretical predictions, incontrovertible experimental demonstrations of heavy pnictogen chalcohalides adopting a perovskite structure are lacking. Here we report our attempts to prepare CsBiSCl2 adopting a perovskite structure as colloidal nanocrystals. Synthesis of nanoscale materials can indeed rely on fast, nonequilibrium reactions and on large, eventually thermodynamically favorable surface energies, leading to the possibility of stabilizing kinetically trapped or metastable phases. However, we obtained no CsBiSCl2, but a mixture of nanocrystals of secondary phases, namely Cs3BiCl6 submicrometric polyhedra, Bi2S3 nanoscopic rods, and Cs3Bi2Cl9 nanoscopic dots, whose low polydispersity enabled an effective separation via size/shape selective precipitation. This work confirms that heavy pnictogen chalcohalides are hardly prone to adopting a perovskite structure. Nevertheless, chemistry at the nanoscale offers multiple possibilities for overcoming phase segregation and pursuing the synthesis of prospective mixed anion compound semiconductors.

Quantum-confined bismuth iodide perovskite nanocrystals in mesoporous matrices

Bismuth iodide perovskite nanocrystals are considered a viable alternative to the Pb halide ones due to their reduced toxicity and increased stability. However, it is still challenging to fabricate nanocrystals with a small and controlled size, and their electronic properties are not well understood. Here, we propose the growth of Bi iodide perovskite nanocrystals using different mesoporous silica with ordered pores of controlled diameter as templates. We obtain a series of confined Cs3Bi2I9 and MA3Bi2I9 perovskites with diameters of 2.3, 3.7, 7.4, and 9.2 nm, and precise size control. The complex absorption spectra of the encapsulated perovskites cannot be properly fitted using classical Tauc or Elliott formalisms. By fitting the spectra with a modified Elliott formula, the bandgap values and exciton binding energies (70-400 meV) could be extracted. The calculated bandgaps scale with the pore sizes. Using a combined experimental and theoretical approach, we demonstrate for the first time quantum confinement in 0D Bi-iodide perovskite nanocrystals.

Exploring Non-Toxic Lower Dimensional Perovskites for Next-Generation X-Ray Detectors

Owing to their extraordinary photophysical properties, organometal halide perovskites are emerging as a new material class for X-ray detection. However, the existence of toxic lead makes their commercialization questionable and should readily be replaced. Accordingly, several lead alternatives have been introduced into the framework of conventional perovskites, resulting in various new perovskite dimensionalities. Among these, Pb-free lower dimensional perovskites (LPVKs) not only show promising X-ray detecting properties due to their higher ionic migration energy, wider and tunable energy bandgap, smaller dark currents, and structural versatility but also exhibit extended environmental stability. Herein, first, the structural organization of the PVKs (including LPVKs) is summarized. In the context of X-ray detectors (XDs), the outstanding properties of the LPVKs and active layer synthesis routes are elaborated afterward. Subsequently, their applications in direct XDs are extensively discussed and the device performance, in terms of the synthesis method, device architecture, active layer size, figure of merits, and device stability are tabulated. Finally, the review is concluded with an in-depth outlook, thoroughly exploring the present challenges to LPVKs XDs, proposing innovative solutions, and future directions. This review provides valuable insights into optimizing non-toxic Pb-free perovskite XDs, paving the way for future advancements in the field.

Ferroelectric Organic-Inorganic Hybrid Ammonium Halogenobismuthate(III) for Piezoelectric Energy Harvesting

Halogenobismuthate(III) compounds are of recent interest because of their low toxicity and distinct electrical properties. The utility of these materials as ferroelectrics for piezoelectric energy harvesters is still in its early stages. Herein, we report a hybrid ammonium halogenobismuthate(III) [BPBrDMA]2·[BiBr5], crystallizing in a ferroelectrically active polar noncentrosymmetric Pna21 space group. Its noncentrosymmetric structure was confirmed by the detection of the second harmonic generation response. The ferroelectric P-E hysteresis loop measurements on the thin film sample of [BPBrDMA]2·[BiBr5] gave a saturation polarization (Ps) of 5.72 μC cm-2. The piezoresponse force microscopy analysis confirmed its ferroelectric and piezoelectric nature, showing characteristic domain structures and signature hysteresis and butterfly loops. The piezoelectric energy harvesting attributes of [BPBrDMA]2·[BiBr5] were further probed on its polylactic acid (PLA) composites. The 15 wt % [BPBrDMA]2·[BiBr5]-PLA polymer composite resulted in a high output voltage of 26.2 V and power density of 15.47 μW cm-2. The energy harvested from this device was further utilized for charging a 10 μF capacitor within 3 min.

SCAPS-1D simulated organometallic halide perovskites: A comparison of performance under Sub-Saharan temperature condition

Photovoltaic technology has been widely recognized as a means to advance green energy solutions in the sub-Saharan region. In the real-time operation of solar modules, temperature plays a crucial role, making it necessary to evaluate the thermal impact on the performance of the solar devices, especially in high-insolation environments. Hence, this paper investigates the effect of operating temperature on the performance of two types of organometallic halide perovskites (OHP) - formamidinium tin iodide (FASnI3) and methylammonium lead iodide (MAPbI3). The solar cells were evaluated under a typical Nigerian climate in two different cities before and after graphene passivation. Using a one-dimensional solar capacitance simulation software (SCAPS-1D) program, the simulation results show that graphene passivation improved the conversion efficiency of the solar cells by 0.51 % (FASnI3 device) and 3.11 % (MAPbI3 device). The presence of graphene played a vital role in resisting charge recombination and metal diffusion, which are responsible for the losses in OHP. Thermal analysis revealed that the MAPbI3 device exhibited an increased fill factor (FF) in the temperature range of 20-64 °C, increasing the power conversion efficiency (PCE). This ensured that the MAPbI3 solar cell performed better in the city and the season with harsher thermal conditions (Kaduna, dry season). Thus, MAPbI3 solar cells can thrive excellently in environments where the operating temperature is below 65 °C. Overall, this study shows that the application of OHP devices in sub-Saharan climatic conditions is empirically possible with the right material modification.

Exploration of Solution-Processed Bi/Sb Solar Cells by Automated Robotic Experiments Equipped with Microwave Conductivity

Solution-processed inorganic solar cells with less toxic and earth-abundant elements are emerging as viable alternatives to high-performance lead-halide perovskite solar cells. However, the wide range of elements and process parameters impede the rapid exploration of vast chemical spaces. Here, we developed an automated robot-embedded measurement system that performs photoabsorption spectroscopy, optical microscopy, and white-light flash time-resolved microwave conductivity (TRMC). We tested 576 films of quaternary element-blended wide-bandgap Cs-Bi-Sb-I semiconductors with various compositions, organic salt additives (MACl, FACl, MAI, and FAI, where MA and FA represent methylammonium and formamidinium, respectively), and thermal annealing temperatures. Among them, we found that the maximum power conversion efficiency (PCE) was 2.36%, which is significantly higher than the PCE of 0.68% for a reference film without an additive. Machine learning (ML) and statistical analyses revealed significant features and their relationships with TRMC transients, thereby demonstrating the advantages of combining ML and automated experiments for the high-throughput exploration of photovoltaic materials.

Lead-Free Halide Perovskites for Direct X-Ray Detectors

Lead halide perovskites have made remarkable progress in the field of radiation detection owing to the excellent and unique optoelectronic properties. However, the instability and the toxicity of lead-based perovskites have greatly hindered its practical applications. Alternatively, lead-free perovskites with high stability and environmental friendliness thus have fascinated significant research attention for direct X-ray detection. In this review, the current research progress of X-ray detectors based on lead-free halide perovskites is focused. First, the synthesis methods of lead-free perovskites including single crystals and films are discussed. In addition, the properties of these materials and the detectors, which can provide a better understanding and designing satisfactory devices are also presented. Finally, the challenge and outlook for developing high-performance lead-free perovskite X-ray detectors are also provided.

Centimeter-Sized Piezoelectric Single Crystal of Chiral Bismuth-Based Hybrid Halide with Superior Electrostrictive Coefficient

The lead-free hybrid perovskite piezoelectrics possess advantages of easy processing, light weight, and low-toxicity over inorganic ceramics. However, the lack of understanding in structure-property relationships hinders exploration of new molecular piezoelectric crystals with excellent performances. Herein, by introducing chiral α-phenylethylammonium (α-PEA⁺ ) cations into bismuth-based hybrid halides, centimeter-sized (R-α-PEA)₄ Bi₂ I₁₀ and (S-α-PEA)₄ Bi₂ I₁₀ single crystals with a superior piezoelectric voltage coefficient g₂₂ of 309 mV m N^-1 , are obtained. Structural rigidity in crystals leads to a remarkable electrostrictive coefficient Q₂₂ of 25.8 m⁴ C^-2 , nearly 20 times higher than that of poly(vinylidene fluoride) (PVDF), which is beneficial to improve piezoelectricity with the synergistic effect of chirality. Moreover, the as-grown crystals show outstanding phase stability from 173 K to ≈470 K. This work suggests a design strategy based on rigidity and chirality to exploit novel piezoelectrics among hybrid metal halides.

Recent developments in lead-free bismuth-based halide perovskite nanomaterials for heterogeneous photocatalysis under visible light

Halide perovskite materials, especially lead-based perovskites, have been widely used for optoelectronic and catalytic applications. However, the high toxicity of the lead element is a major concern that directs the research work toward lead-free halide perovskites, which could utilize bismuth as a promising candidate. Until now, the replacement of lead by bismuth in perovskites has been well studied by designing bismuth-based halide perovskite (BHP) nanomaterials with versatile physical-chemical properties, which are emerging in various application fields, especially heterogeneous photocatalysis. In this mini-review, we present a brief overview of recent progress in BHP nanomaterials for photocatalysis under visible light. The synthesis and physical-chemical properties of BHP nanomaterials have been comprehensively summarized, including zero-dimensional, two-dimensional nanostructures and hetero-architectures. Later, we introduce the photocatalytic applications of these novel BHP nanomaterials with visible-light response, improved charge separation/transport and unique catalytic sites. Due to advanced nano-morphologies, a well-designed electronic structure and an engineered surface chemical micro-environment, BHP nanomaterials demonstrate enhanced photocatalytic performance for hydrogen generation, CO₂ reduction, organic synthesis and pollutant removal. Finally, the challenges and future research directions of BHP nanomaterials for photocatalysis are discussed.

Fast Lead-Free Humidity Sensor Based on Hybrid Halide Perovskite

An environmentally friendly analog of the prominent methylammonium lead halide perovskite, methylammonium bismuth bromide (MA3Bi2Br9), was prepared and investigated in the form of powder, single crystals and nanowires. Complete characterization via synchrotron X-ray diffraction data showed that the bulk crystal does not incorporate water into the structure. At the same time, water is absorbed on the surface of the crystal, and this modification leads to the changes in the resistivity of the material, thus making MA3Bi2Br9 an excellent candidate for use as a humidity sensor. The novel sensor was prepared from powder-pressed pellets with attached carbon electrodes and was characterized by being able to detect relative humidity over the full range (0.7–96% RH) at ambient temperature. Compared to commercial and literature values, the response and recovery times are very fast (down to 1.5 s/1.5 s).

Self-trapped exciton emission in an Sn(II)-doped all-inorganic zero-dimensional zinc halide perovskite variant

The toxicity of Pb in conventional perovskites impedes the commercialization of their optoelectronic devices. Therefore, the search for comparable Pb-free perovskites is vital and needs urgent attention. Herein, for the first time, we successfully synthesize the Sn(II)-doped Pb-free zinc-based perovskite variant Cs₂ZnCl₄. The influence of doping is investigated both experimentally and theoretically. Broad bright red emission with a large Stokes shift is observed and attributed to the self-trapped exciton (STE) emission of the doped disphenoidal [SnCl₄]^2- units in the host matrix, from ³P₁ to ¹S₀. Temperature-dependent photoluminescence (PL) shows a peak split at cryogenic temperature, which is ascribed to the Jahn-Teller effect of the ³P₁ state. Theoretical study reveals that the impurity states of Sn²⁺ shrink the bandgap and localize the band edges, and distortion of [SnCl₄]^2- under excitation ultimately leads to the STE emission. This work is significant for STE emission studies and will pave a way for Pb-free perovskite variants in illumination applications.

Self-Assembled Organic Cations-Assisted Band-Edge Tailoring in Bismuth-Based Perovskites for Enhanced Visible Light Absorption and Photoconductivity

Bismuth-based zero-dimensional perovskites garner high research interest because of their advantages, such as excellent moisture stability and lower toxicity in comparison to lead-based congeners. However, the wide optical bandgap (>2 eV) and poor photoconductivity of these materials are the bottlenecks for their optoelectronic applications. Herein, we report a combined experimental and theoretical study of the structural features and optoelectronic properties of two novel and stable zero-dimensional bismuth perovskites: (biphenyl bis(methylammonium))1.5BiI6·2H2O (BPBI) and (naphthalene diimide bis(ethylammonium))1.5BiI6·2H2O (NDBI). NDBI features a remarkably narrower bandgap (1.82 eV) than BPBI (2.06 eV) because of the significant orbital contribution of self-assembled naphthalene diimide cations at the band edges of NDBI. Further, the FP-TRMC analysis revealed that the photoconductivity of NDBI is about 3.7-fold greater than that of BPBI. DFT calculations showed that the enhanced photoconductivity in NDBI arises from its type-IIa band alignment, whereas type-Ib alignment was seen in BPBI.

Recent advances toward environment-friendly photodetectors based on lead-free metal halide perovskites and perovskite derivatives

Recently, metal-halide perovskites have emerged as promising materials for photodetector (PD) applications owing to their superior optoelectronic properties, such as ambipolar charge transport characteristics, high carrier mobility, and so on. In the past few years, rapid progress in lead-based perovskite PDs has been witnessed. However, the critical environmental instability and lead-toxicity seriously hinder their further applications and commercialization. Therefore, searching for environmentally stable and lead-free halide perovskites (LFHPs) to address the above hurdles is certainly a worthwhile subject. In this review, we present a comprehensive overview of currently explored LFHPs with an emphasis on their crystal structures, optoelectronic properties, synthesis and modification methods, as well as the PD applications. LFHPs are classified into four categories according to the replacement strategies of Pb²⁺, including AB(ii)X₃, A₃B(iii)₂X₉, A₂B(i)B(iii)'X₆, and newly-emerging perovskite derivatives. Then, we give a demonstration of the preliminary achievements and limitations in environment-friendly PDs based on such LFHPs and perovskite derivatives, and also discuss their applications in biological synapses, imaging, and X-ray detection. With the perspective of their properties and current challenges, we provide an outlook for future directions in this rapidly evolving field to achieve high-quality LFHPs and perovskite derivatives for a broader range of fundamental research and practical applications.

Energy Storage and Electrocaloric Cooling Performance of Advanced Dielectrics

Dielectric capacitors are widely used in pulse power systems, electric vehicles, aerospace, and defense technology as they are crucial for electronic components. Compact, lightweight, and diversified designs of electronic components are prerequisites for dielectric capacitors. Additionally, wide temperature stability and high energy storage density are equally important for dielectric materials. Ferroelectric materials, as special (spontaneously polarized) dielectric materials, show great potential in the field of pulse power capacitors having high dielectric breakdown strength, high polarization, low-temperature dependence and high energy storage density. The first part of this review briefly introduces dielectric materials and their energy storage performance. The second part elaborates performance characteristics of various ferroelectric materials in energy storage and refrigeration based on electrocaloric effect and briefly shed light on advantages and disadvantages of various common ferroelectric materials. Especially, we summarize the polarization effects of underlying substrates (such as GaN and Si) on the performance characteristics of ferroelectric materials. Finally, the review will be concluded with an outlook, discussing current challenges in the field of dielectric materials and prospective opportunities to assess their future progress.

Lead-Free Antimony Halide Perovskite with Heterovalent Mn2+ Doping

Lead toxicity is hindering the applications of conventional lead halide perovskites (PVKs), and antimony (Sb) is a promising nontoxic Pb alternative, showing huge potential in optoelectronic devices. Herein, pure and Mn-doped Cs₃Sb₂Cl₉ crystals are synthesized in a facile route and studied both experimentally and theoretically. All the pure and Mn-doped Cs₃Sb₂Cl₉ crystals show good crystallinity and similar crystal structures, exhibiting visible photoluminescence (PL) characteristics with emission peaks at 422 and 613 nm, respectively. Combined density functional theory (DFT) calculations and experimental analyses reveal that the structure of the host PVK compound Cs₃Sb₂Cl₉ is not influenced by the formation of [MnCl₆]^4- octahedra and that Mn 3d orbitals generate impurity states in the forbidden energy gap of Cs₃Sb₂Cl₉. Therefore, energy transfer from Cs₃Sb₂Cl₉ to Mn 3d states is observed, resulting in the d-d transition and bright red luminescence. Mn-doped Sb-based PVK can be utilized as a new platform for optoelectronic applications.