Controllable and Diversiform Topological Morphologies of Self-Assembling Supra-Amphiphiles with Aggregation-Induced Emission Characteristics for Mimicking Light-Harvesting Antenna

Photo-controlled order-to-order host-guest self-assembly transfer for an afterglow effect with water resistance

Due to the general incompleteness of photochemical reactions, the photostationary structure in traditional photo-controlled host-guest self-assembly transfer is usually disordered or irregular. This fact readily affects the photoregulation or improvement of related material properties. Herein, a photoexcitation-induced aggregation molecule, hydroxyl hexa(thioaryl)benzene (HB), was grafted into β-cyclodextrin to form a host-guest system. Upon irradiation, the excited state conformational change of HB can drive an order-to-order phase transition of the system, enabling the transfer of the initial linear nanostructure to a photostationary worm-like nanostructure with orderliness and crystallinity capability. Along with the photoexcitation-controlled phase transition, an afterglow effect was obtained from the films prepared by doping the host-guest system into poly(vinyl alcohol). The afterglow effect had a superior water resistance, which successfully overcame the general sensitivity of doped materials with the afterglow effect to water vapor. These results are expected to provide new insights for pushing forward chemical self-assembly from the light perspective, towards materials with superior and stable properties under light treatment.

Three-step cascaded artificial light-harvesting systems with tunable efficiency based on metallacycles

It is still challenging to develop multi-step cascaded artificial light-harvesting systems (ALHSs) with tunable efficiency. Here, we designed novel cascaded ALHSs with AIE-active metallacycles as the light-harvesting antenna, Eosin Y (ESY) and sulforhodamine 101 (SR101) as conveyors, near-infrared emissive chlorin-e6 (Ce6) as the final acceptor. The close contact and fair spectral overlap between donor and acceptor molecules at each level ensured the efficient sequential three-step energy transfer. The excited energy was sequentially and efficiently funneled to Ce6 along the cascaded line MTPEPt1 → ESY → SR101 → Ce6. Additionally, a unique strategy for regulating the efficiency of ALHS was illustrated by adjusting hydrophilic and hydrophobic interactions.

Noncovalent Polymerization-Activated Ultrastrong Near-Infrared Room-Temperature Phosphorescence Energy Transfer Assembly in Aqueous Solution

Noncovalent macrocycle-confined supramolecular purely organic room-temperature phosphorescence (RTP) is a current research hotspot. Herein, a high-efficiency noncovalent polymerization-activated near-infrared (NIR)-emissive RTP-harvesting system in aqueous solution based on the stepwise confinement of cucurbit[7]uril (CB[7]) and β-cyclodextrin-grafted hyaluronic acid (HACD), is reported. Compared with the dodecyl-chain-bridged 6-bromoisoquinoline derivative (G), the dumbbell-shaped assembly G⊂CB[7] presents an appeared complexation-induced RTP signal at 540 nm via the first confinement of CB[7]. Subsequently, benefitting from the stepwise confinement encapsulation of the β-cyclodextrin cavity, the subsequent noncovalent polymerization of the binary G⊂CB[7] assembly enabled by HACD can contribute to the further-enhanced RTP emission intensity approximately eight times in addition to an increased lifetime from 59.0 µs to 0.581 ms. Moreover, upon doping a small amount of two types of organic dyes, Nile blue or tetrakis(4-sulfophenyl)porphyrin as an acceptor into the supramolecular confinement assembly G⊂CB[7] @ HACD, efficient RTP energy transfer occurs accompanied by a long-lived NIR-emitting performance (680 and 710 nm) with a high donor/acceptor ratio. Intriguingly, the prepared RTP-harvesting system is successfully applied for targeted NIR imaging of living tumor cells by utilizing the targeting ability of hyaluronic acid, which provides a new strategy to create advanced water-soluble NIR phosphorescent materials.

Bioinspired Supramolecular Nanotoroids with Aggregation-Induced Emission Characteristics

Supramolecular toroids have attracted continuous attention because of their fascinating topological structure and important role in biological systems. However, it still remains a great challenge to construct supramolecular functional toroids and clarify the formation mechanism. Herein, we develop a strategy to prepare supramolecular helical fluorescent nanotoroids by cooperative self-assembly of an amino acid and a dendritic amphiphile (AIE-den-1) with aggregation-induced emission characteristics. Mechanistic investigation on the basis of fluorescence and circular dichroism analyses suggests that the toroid formation can be driven by the interactions of AIE-den-1 with amino acid and goes through a topological morphology transformation from nanofibers to left-handed nanotoroids by means of a twist-fused-loop process.

Folic Acid-Modified Cyclodextrin Multivalent Supramolecular Assembly for Photodynamic Therapy

The construction of supramolecular multivalent assemblies with unique photoluminescence behaviors and biological functions has become a research hot spot recently in the biomaterial field. Herein, we report an adaptive supramolecular assembly via a multivalent co-assembly strategy prepared in two stages by using an adamantane-connected pyrenyl pyridinium derivative (APA2), sulfonated aluminum phthalocyanine (PcS), and folic acid-modified β-cyclodextrin (FA-CD) for efficient dual-organelle targeted photodynamic cancer cell ablation. Benefiting from π-π and electrostatic interactions, APA2 and PcS could first assemble into non-fluorescent irregular nanoaggregates because of the heterodimer aggregation-induced quenching and then secondarily assemble with FA-CD to afford targeted spherical nanoparticles (NPs) with an average diameter of around 50 nm, which could be specifically taken up by HeLa cancer cells through endocytosis in comparison with 293T normal cells. Intriguingly, such multivalent NPs could adaptively disaggregate in an intracellular physiological environment of cancer cells and further respectively and selectively accumulate in mitochondria and lysosomes, which not only displayed near-infrared two-organelle localization in situ but also aroused efficient singlet oxygen generation under light irradiation to effectively eliminate cancer cells up to 99%. This supramolecular multivalent assembly with an adaptive feature in a specific cancer cell environment provides a feasible strategy for precise organelle-targeted imaging and an efficiently synergetic photodynamic effect in situ for cancer cell ablation.

Artificial light-harvesting systems based on macrocycle-assisted supramolecular assembly in aqueous media

Light-harvesting, which involves the conversion of sunlight into chemical energy by natural systems such as plants, bacteria, is one of the most universal routine activities in nature. Thus far, various artificial light-harvesting systems (LHSs) have been fabricated toward solar energy utilization through mimicking natural photosynthesis in simplified and altered ways. Macrocycles are supramolecular hosts with unique cavities, in which specific guest molecules can be recognized based on non-covalent interactions. They have been widely employed in constructing LHSs due to their ability to form supramolecular assembly and dynamic molecular activity. In this review, we mainly focus on some representative examples reported by our group and other groups. Specifically, the fabrication of LHSs and their related discussions, such as a high donor/acceptor ratio, driving force for the formation of supramolecular assemblies and energy transfer mechanisms using different water-soluble macrocycles such as cyclodextrins (CD), pillararenes (PA), calixarenes (CA), cucurbiturils (CB), and other macrocycles will be included. In addition, how the resulting supramolecular self-assembled LHSs could be potentially utilized for photocatalysis, sensing, and imaging is also explained in detail. Challenges and developing trends for photochemical solar energy conversion will also be presented.

An overview from simple host-guest systems to progressively complex supramolecular assemblies

Supramolecular chemistry involving macrocyclic hosts is a highly interdisciplinary and fast-growing research field in chemistry, biochemistry, and materials science. Host-guest based supramolecular assemblies, as constructed through non-covalent interactions, are highly dynamic in nature, and can be tuned easily using their responses to various external stimuli, providing a convenient approach to achieve excellent functional materials. Macrocyclic hosts, particularly cyclodextrins, cucurbit[n]urils, and calix[n]arenes, which have unique features like possessing hydrophobic cavities of different sizes, along with hydrophilic external surfaces, which are also amenable towards easy derivatizations, are versatile cavitands or host molecules to encapsulate diverse guest molecules to form stable host-guest complexes with many unique structures and properties. Interestingly, host-guest complexes possessing amphiphilic properties can easily lead to the formation of various advanced supramolecular assemblies, like pseudorotaxanes, rotaxanes, polyrotaxanes, supramolecular polymers, micelles, vesicles, supramolecular nanostructures, and so on. Moreover, these supramolecular assemblies, with varied morphologies and responsiveness towards external stimuli, have immense potential for applications in nanotechnology, materials science, biosensors, drug delivery, analytical chemistry and biomedical sciences. In this perspective, we present a stimulating overview, discussing simple host-guest systems to complex supramolecular assemblies in a systematic manner, aiming to encourage future researchers in this fascinating area of supramolecular chemistry to develop advanced supramolecular materials with superior functionalities, for their deployment in diverse applied areas.

Aggregation-Induced Emission Luminogens with Photoresponsive Behaviors for Biomedical Applications

Fluorescent biomedical materials can visualize subcellular structures and therapy processes in vivo. The aggregation-induced emission (AIE) phenomenon helps suppress the quenching effect in the aggregated state suffered by conventional fluorescent materials, thereby contributing to design strategies for fluorescent biomedical materials. Photoresponsive biomedical materials have attracted attention because of the inherent advantages of light; i.e., remote control, high spatial and temporal resolution, and environmentally friendly characteristics, and their combination with AIE facilitates development of fluorescent molecules with efficient photochemical reactions upon light irradiation. In this review, organic compounds with AIE features for biomedical applications and design strategies for photoresponsive AIE luminogens (AIEgens) are first summarized briefly. Applications are then reviewed, with the employment of photoresponsive and AIE-active molecules for photoactivation imaging, super-resolution imaging, light-induced drug delivery, photodynamic therapy with photochromic behavior, and bacterial targeting and killing being discussed at length. Finally, the future outlook for AIEgens is considered with the aim of stimulating innovative work for further development of this field.

The construction of an artificial light-harvesting system with two-step sequential energy transfer based on supramolecular polymers

An artificial light-harvesting system with two-step sequential energy transfer was constructed in aqueous media based on cyano-substituted p-phenylenevinylene derivative (PPTA) and bis-(p-sulfonatocalix[4]arenes) (BSC4) supramolecular polymers formed through host-guest interactions, in which two different fluorescent dyes, eosin Y (EY) and sulforhodamine (SR101), were employed as energy acceptors. The obtained artificial light-harvesting system can achieve an efficient two-step energy transfer process from PPTA-BSC4 to EY and then to SR101 with high energy-transfer efficiencies of up to 36.6% and 40.8%, respectively. More importantly, the harvested energy from the PPTA-BSC4 + EY + SR101 system can be used to promote the dehalogenation of α-bromoacetophenone with a yield of 89% in aqueous solution.

Quantitative Förster Resonance Energy Transfer: Efficient Light Harvesting for Sequential Photo-Thermo-Electric Conversion

Light is essential to all life on the earth. Thus, highly efficient light-harvesting systems with the sequential energy transfer process are significant for using solar energy in photosynthesis. For developing an efficient light-harvesting system, a liquid aggregation-induced emission (AIE) dye TPE-EA is obtained, as a donor and solvent, which can light up the aggregation caused quenching (ACQ) Nile Red (NiR, acceptor) to construct a quantitative Förster resonance energy transfer (FRET) system in NiR⊂TPE-EA. Impressively, this FRET pair shows an impressive photothermal effect, producing a peak temperature of 119 °C while excited by UV light, with 37.8% of conversion efficiency. NiR⊂TPE-EA is quite different from most other photothermal materials, which require excitation with long wavelength light (>520 nm). Therefore, NiR⊂TPE-EA firstly converts the solar into thermal energy and then into electric energy to achieve sequential photo-thermo-electric conversion. Such sequential conversion, suitable for being excited by sunlight, is anticipated to unlock new and smart approaches for capturing solar energy.

Synthesis of a Thermal-Responsive Dual-Modal Supramolecular Probe for Magnetic Resonance Imaging and Fluorescence Imaging

Dual-modal imaging can integrate the advantages of different imaging technologies, which could improve the accuracy and efficiency of clinical diagnosis. Herein, a novel amphiphilic thermal-responsive copolymer obtained from three types of monomers, N-isopropyl acrylamide, 2-(acetoacetoxy) ethyl methacrylate, and propargyl methacrylate, by RAFT copolymerization, is reported. It can be grafted with β-cyclodextrin and aggregation-induced emission (AIE) luminogens tetraphenylethylene by click chemistry and Biginelli reaction. The multifunctional supramolecular polymer (P4) can be constructed by host-guest inclusion between the copolymer and the Gd-based contrast agent (CA) modified by adamantane [Ad-(DOTA-Gd)]. And it can form vesicles with a bilayer structure in aqueous which will enhance the AIE and magnetic resonance imaging effects. As fluorescent thermometer, P4 can enter HeLa cells for intracellular fluorescence imaging (FI) and is sensitive to temperature with detection limit value of 1.5 °C. As magnetic resonance CA, P4 exhibits higher relaxation compared to Magnevist, which can prolong the circulation time in vivo. In addition, Gd³⁺ in the polymer can be quickly released from the body by disassembly that reduced the biological toxicity. This work introduces new synthetic ideas for dual-modal probe, which has great potential for clinical diagnostic applications in bioimaging.

Artificial Light-Harvesting Systems Based on AIEgen-branched Rotaxane Dendrimers for Efficient Photocatalysis

Aiming at the construction of novel platform for efficient light harvesting, the precise synthesis of a new family of AIEgen-branched rotaxane dendrimers was successful realized from an AIEgen-functionalized [2]rotaxane through a controllable divergent approach. In the resultant AIE macromolecules, up to twenty-one AIEgens located at the tails of each branches, thus making them the first successful example of AIEgen-branched dendrimers. Attributed to the solvent-induced switching feature of the rotaxane branches, the integrated rotaxane dendrimers displayed interesting dynamic feature upon the aggregation-induced emission (AIE) process. Moreover, novel artificial light-harvesting systems were further constructed based on these AIEgen-branched rotaxane dendrimers, which revealed impressive generation-dependent photocatalytic performances for both photooxidation reaction and aerobic cross-dehydrogenative coupling (CDC) reaction.

Polypseudorotaxanes Derived from Tetraphenylethylene: Preparation and Tandem-Activated Aggregation-Induced Emission

Tuning the fluorescence of aggregation-induced emission (AIE)-based materials in a reversible way is essential and a requisite for their applications. The multiple host-guest interactions of polypseudorotaxanes (PPRs) could alter the aggregation state of hydrophobic AIE-based polymeric materials and consequently switch the fluorescence. Herein, tetraphenylethylene (TPE) as a typical AIE molecule has been incorporated into the main chains of the guest polyurethane via a step condensation between poly(ethylene glycol) (PEG)-based dicarbonate and TPE-diamine along with the cleavable disulfide bonds. γ-Cyclodextrins (γ-CDs) can selectively recognize the TPE units at the polyurethane chains to afford a PPR. Hydrophilic PEG segments and γ-CD molecules in the PPR could promote the disaggregation of TPE units, suppressing the fluorescence emission of TPE. To restore the aggregated state and fluorescence of TPE units, tris(2-carboxyethyl)phosphine (TCEP) and α-amylase are sequentially introduced to cleave the disulfide bonds and cut α-1,4 glycosidic bonds of γ-CD, reactivating the AIE behavior of PPR tandemly and accomplishing the reversible cycle of tuning the fluorescence of TPE. The present study provides a tandem way to switch the AIE behavior of polymeric materials reversibly.

Modulation of Aggregation-Induced Emission by Excitation Energy Transfer: Design and Application

Excitation energy transfer (EET) as a fundamental photophysical process is well-explored for developing functional materials with tunable photophysical properties. Compared to traditional fluorophores, aggregation-induced emission luminogens (AIEgens) exhibit unique advantages for building EET systems, especially serving as energy donors, due to their outstanding photophysical properties such as bright fluorescence in aggregation state, broad absorption and emission spectra, large Stokes shift, and high photobleaching resistance. In addition, the photophysical properties of AIEgens can be modulated by energy transfer for improved luminescence performance. Therefore, a variety of EET systems based on AIEgens have been constructed and their applications in different areas have been explored. In this review, we summarize recent progress in the design strategy of AIE-based energy transfer systems for light-harvesting, fluorescent probes and theranostic systems, with an emphasis on design strategies to achieve desirable properties. The limitations, challenges and future opportunities of AIE-EET systems are briefly outlined. Design strategies and applications (light-harvesting, fluorescent probe and theranostics) of AIEgen-based excitation energy systems are discussed in this review.