Aerogel-Based Biomaterials for Biomedical Applications: From Fabrication Methods to Disease-Targeting Applications

Pilot Study of Acute and Subchronic Oral Toxicological Biosafety Evaluation of Resorcinol-Formaldehyde Aerogel Nanomaterial in Kunming Mice

Resorcinol-formaldehyde aerogel (RFa) is a unique nanomaterial composed of polymer nanoparticles with a three-dimensional network structure. Our previous studies have demonstrated its application in the separation and purification of alkaloids, and we are exploring its application potential as the drug delivery carrier. Therefore, it is necessary to comprehensively understand the in vivo toxicity profile of RFa and evaluate its oral biosafety. In this work, we systematically evaluated the in vivo acute toxicity and subchronic oral toxicity of RFa in both male and female Kunming mice. During the 14-day acute toxicity test, the dose administered (M = 580 mg/kg) was converted from the clinical dose of adsorbed alkaloids on RFa. The mice were gavaged only once and were observed continuously for 14 days. There were no abnormalities, and pathological changes in the major organs (heart, liver, spleen, lungs, kidneys, testes, and ovaries) were detected, followed by the 12-week subchronic toxicity test at the dose of 1/4M, 1/2M, and M. All mice were administered orally once daily and regularly observed throughout the experimental period. As a result, no abnormalities were found in body weights, food intake, and organ coefficients. Tissue section revealed no pathological changes in the major organs. In addition, there were no significant differences in hematological, blood biochemical, and coagulation parameters in both male and female mice compared to control group. These results showed that RFa was well tolerated at these dosage levels and did not cause significant toxic effects in Kunming mice. This study, as part of a broad research program on the biosafety of aerogel nanomaterials, provided the biosafety assurance for the subsequent study of RFa in biomedical applications.

Antimicrobial Coatings Based on Hybrid Iron Oxide Nanoparticles

This study presents the preparation of hybrid iron oxide nanocomposites through a two-step process combining microfluidic-assisted synthesis and post-synthetic surface modification. Fe3O4 nanoparticles were synthesized and simultaneously functionalized with salicylic acid using a three-dimensional vortex-type microfluidic chip, enabling rapid and uniform particle formation. The resulting Fe3O4/SA nanostructures were further modified with either silver or copper oxide to form iron oxide nanocomposites with enhanced antimicrobial functionality. These nanocomposites were subsequently integrated into silica aerogel matrices using a dip-coating approach to improve surface dispersion, structural stability, and biocompatibility. The structural and morphological properties of the samples were investigated using XRD, FT-IR, TEM with SAED analysis, and Raman microscopy. In vitro cytotoxicity and antimicrobial assays demonstrated that Fe3O4/SA-Ag and Fe3O4/SA-CuO exhibit potent antibacterial activity and cell type-dependent biocompatibility. In vivo biodistribution studies showed no accumulation in major organs and selective clearance via the spleen, validating the systemic safety of the platform. These findings highlight the potential of the synthesized nanocomposites as biocompatible, antimicrobial coatings for advanced biomedical surfaces.

Advanced Aerogels for Water Remediation: Unraveling Their Potential in Fats, Oils, and Grease Sorption-A Comprehensive Review

The increasing contamination of water bodies by fats, oils, and grease (FOG) poses significant environmental and operational challenges, necessitating the development of advanced remediation technologies. Aerogels, with their ultra-lightweight structure, high porosity, and tunable surface chemistry, have emerged as promising sorbents for efficient FOG removal. This comprehensive review explores recent advancements in aerogel materials, highlighting novel formulations, functional modifications, and nanotechnology integrations that enhance sorption capacity and reusability. It delves into the mechanistic aspects of FOG sorption, providing insights into how surface interactions and structural properties influence performance. The sustainability of aerogels is emphasized, particularly the use of bio-based and eco-friendly materials that align with green remediation strategies. A comparative analysis with conventional sorbents underscores the advantages of aerogels in terms of efficiency, environmental impact, and cost-effectiveness. Furthermore, real-world applications, including oil spill cleanup and wastewater treatment, are discussed alongside challenges, regulatory considerations, and future research directions. By offering a holistic perspective on the potential of aerogels in water remediation, this review serves as a valuable resource for researchers and industry professionals seeking innovative and sustainable solutions for FOG management.

Advances in Bacterial Cellulose-Based Scaffolds for Tissue Engineering: Review

Bacterial cellulose (BC) has emerged as a highly versatile and promising biomaterial in tissue engineering, with potential applications across skin, bone, cartilage, and vascular regeneration. Its exceptional properties like high mechanical strength, superior biocompatibility, excellent moisture retention, and inherent ability to support cell adhesion and proliferation, make BC particularly effective for wound healing and skin regeneration. These attributes accelerate tissue repair and foster new tissue formation, highlighting its value in skin-related applications. Additionally, BC's capacity to support osteogenic differentiation, combined with its mechanical robustness, positions it as a strong candidate for bone tissue engineering, facilitating regeneration and repair. Recent advancements have emphasized the development of BC-based hybrid scaffolds to enhance tissue-specific functionalities, including vascularization and cartilage regeneration. These innovations aim to address the complex requirements of various tissue engineering applications. However, challenges remain, particularly regarding the scalability of BC production, cost-effectiveness, and the long-term stability of BC-based scaffolds. Such barriers continue to limit its broader clinical adoption. This review critically examines the synthesis methods, intrinsic properties, and recent innovations in the design of BC-based scaffolds, offering insights into their potential to revolutionize regenerative medicine. Furthermore, it addresses the key challenges and limitations that must be overcome to enable the clinical integration of BC. By addressing these limitations, BC could play a transformative role in advancing tissue engineering and regenerative therapies, bridging the gap between laboratory research and clinical application.

Enhancing Mechanical Properties of Chitosan-Silica Aerogels with Tricalcium Phosphate Nanoparticles: A Molecular Dynamics Study for Bone Tissue Engineering

Chitosan-silica aerogel nanocomposites are lightweight materials with a highly porous structure that have a wide range of applications, including drug delivery systems, tissue engineering, and insulation. These materials may be strengthened using tricalcium phosphate in chitosan-silica aerogel nanocomposites. Thus, in the present research projects, the influence of different atomic percentages of TCP (2%, 3%, and 5%) on mechanical parameters such as stress-strain, ultimate strength, and Young's modulus of chitosan-silica aerogel NCs was evaluated using molecular dynamics modeling and LAMMPS software. The findings demonstrate that the addition of tricalcium phosphate (1-3%) enhanced the ultimate strength and Young's modulus of the simulated nanocomposite from 26.968 to 43.468 GPa and from 681.145 to 1053.183 MPa, respectively. The ultimate strength and Young's modulus of the silica aerogel/chitosan nanocomposites, however, decreased to 1021.418 MPa and 42.008 GPa, respectively, with the addition more than 5% TCP.

Construction of Nanocellulose Aerogels with Environmental Drying Strategy without Organic Solvent Displacement for High-Efficiency Solar Steam Generation

Solar desalination is one of the effective means to alleviate water scarcity, in which aerogel-like evaporators have attracted extensive attention in the field of efficient desalination. However, the current preparation methods for aerogels still mainly rely on high-cost solutions, such as freeze-drying or supercritical drying. Herein, a preparation scheme for aerogels that can be realized under atmospheric pressure conditions is reported. In this paper, a foam skeleton template (FST) strategy is proposed, in which flake graphite is entangled by cellulose nanofibers (CNFs) and codispersed between the foam cell walls, and subsequently connected with the nascent Ca2+ in the inner wall to form a tough and stable three-dimensional network structure, which can effectively avoid the structural collapse caused by atmospheric drying. The cellulose/graphite aerogel (CGA) prepared using the FST strategy possesses lightweight (36 mg cm-3) and porous (porosity >97%) properties. The 3D porous structure and wetting characteristics of the CGA provided excellent energy management, rapid water transport capability, and a reduced enthalpy of evaporation, which enabled it to achieve a fast water evaporation rate of 3.8 kg m-2 h-1 with 98.4% energy efficiency. This FST strategy provides a solution for the low-cost development of aerogel and desalination.

3D Printing of Biocompatible and Antibacterial Silica-Silk-Chitosan-Based Hybrid Aerogel Scaffolds Loaded with Propolis

The aim of this study is to design a therapeutic enhanced three-dimensional (3D) silk fibroin (SF)-based scaffold containing propolis (Ps)-loaded chitosan (CH) nanocarriers. To this aim, we initially synthesized a hybrid gel-based ink by a synergistic sol-gel and self-assembly approach and then processed the resulting gels by microextrusion-based 3D printing followed by supercritical drying to obtain 3D hybrid aerogel scaffolds. Ps was utilized to enhance the final scaffold's bactericidal efficacy and cell responsiveness. For the synthesis of the scaffold, two Ps loading methods (in preprint and postprinting steps) were investigated in order to optimize the Ps drug quantities in the scaffold and maximize the antibacterial properties of scaffold. In the postprinting Ps loading step, the hybrid silica-oxidized SF (SFO)-CH hydrogel ink was 3D printed into a construct with an interconnected porous structure, and then, Ps was loaded into the printed construct. In the preprint loading method, PS was incorporated into the SF and a hydrolyzed silane solution prior to gelation. The morphological studies demonstrate that the addition of Ps encapsulated CH nanoparticles (NPs) into the hydrogel solution improved the porosity of the developed scaffolds. The rheological analysis of the designed gel ink with and without Ps loading and the release kinetics were studied. The antimicrobial results show that the Ps-loaded scaffolds in the postprinting step exhibited superior antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) strains compared to a preprinted Ps-loaded scaffold. Direct and indirect in vitro cytotoxicity tests also confirmed the designed Ps-loaded scaffold biocompatibility toward a mouse fibroblast (L929) cell line. We demonstrated that the scaffold formulated by propolis-loaded chitosan NPs can enhance the migration and proliferation of L929 fibroblast cells. The obtained results prove the promise of the designed 3D printed silica-SFO-CH-Ps scaffolds as a potent 3D scaffold to mediate tissue regeneration but also as an antibacterial highly porous matrix to support wound healing.

Three-dimensional structured PLCL/ADM bioactive aerogel for rapid repair of full-thickness skin defects

The failure to treat deep skin wounds can result in significant complications, and the limitations of current clinical treatments highlight the pressing need for the development of new deep wound healing materials. In this study, a series of three-dimensional structured PLCL/ADM composite aerogels were fabricated by electrospinning and subsequently characterized for their microstructure, compression mechanics, exudate absorption, and hemostatic properties. Additionally, the growth of HSFs and HUVECs, which are involved in wound repair, was observed in the aerogels. The composite aerogel was subsequently employed in wound repair experiments on rat full-thickness skin with the objective of observing the wound healing rate and examining histological utilizing H&E, Masson, CD31, and COL-I staining. The findings indicated that the PLCL/ADM composite aerogel with a 10% concentration exhibited uniform pore size distribution, a good three-dimensional structure, and compression properties comparable to those of human skin, which could effectively absorb exudate and exert hemostatic effect. In vivo experiment results demonstrated that the aerogel exhibited superior efficacy to conventional oil-gauze overlay therapy and ADM aerogel in promoting wound healing and could facilitate rapid, high-quality in situ repair of deep wounds, thereby offering a novel approach for skin tissue engineering and clinical wound treatment.

Biomimetic Multichannel Silk Nerve Conduits With Multicellular Spatiotemporal Distributions for Spinal Cord Injury Repair

Bioengineered nerve conduits have shown great promise for spinal cord injury (SCI) repair, while their practical values are limited by poor regenerative efficacy and lack of multi-level structural design. Here, inspired by the ingenious anatomy of natural spinal cords, a biomimetic multichannel silk nerve conduit (namely BNC@MSCs/SCs) with multicellular spatiotemporal distributions for effective SCI repair is presented. The biomimetic silk nerve conduit (BNC) with hierarchical channels and aligned pore structures is prepared via a modified directional freeze-casting strategy. Such hierarchical structures provide appropriate space for the mesenchymal stem cells (MSCs) and Schwann cells (SCs) settled in specific channels, which contributes to the generation of BNC@MSCs/SCs resembling the cellular spatiotemporal distributions of natural spinal cords. The in vitro results reveal the facilitated SC migration and MSC differentiation in such BNC@MSCs/SCs multicellular system, which further promotes the tube formation and cell migration of endothelial cells as well as M2 polarization of macrophages. Moreover, BNC@MSCs/SCs can effectively promote the tissue repair and function recovery in SCI rats by attenuating glial scar formation while promoting neuron regeneration and myelin sheath reconstruction. Thus, it is believed that the biomimetic multichannel silk nerve conduits with multicellular spatiotemporal distributions are valuable for SCI repair and other neural tissue regeneration.

Creation of Composite Aerogels Consisting of Activated Carbon and Nanocellulose Blended with Cross-Linked Biopolymers: Application as Ethylene Scavengers

This study involved producing aerogels using activated carbon (AC) and nanocellulose (NC). Two distinct structured composites, AC composite aerogel (ACCA) and NC composite aerogel (NCCA), were developed by separately mixing AC and NC with identical proportions of cross-linked biopolymers: hydroxypropyl methylcellulose (HPMC), methylcellulose (MC), and chitosan (C). These aerogels were evaluated for their capability to adsorb ethylene gas through batch experiments, while the physical and chemical characteristics were thoroughly examined to determine their feasibility of removing ethylene. The resulting ACCA and NCCA aerogels exhibited low densities of 0.094 g cm-3 and 0.077 g cm-3, respectively, coupled with high porosity ranging between 95 and 96%. During the ethylene adsorption test, NCCA exhibited superior ethylene removal rates (~14.88-16.77 mL kg-1) compared to ACCA (~13.57-14.97 mL kg-1). Specifically, NCCA achieved a removal efficiency of 83.86% compared to 74.64% for ACCA. Kinetic model fitting yielded high R2 values ranging from 0.97 to 0.98 with the Lagergren kinetic model. These findings suggest the potential of composite aerogels to be incorporated into food packaging materials for dynamic ethylene capture, independent of environmental conditions, thereby providing promising routes for further development.

Polyimide Aerogel Fiber Bundles for Extreme Thermal Management Systems in Aerospace Applications

Aerogel fibers are an emerging class of ultralightweight materials, which, compared to conventional bulk monolithic and aerogel films, provide better flexibility and extensibility. Despite the recent advancements in this field, due to their highly porous structure, their mechanical properties can be deteriorated. Inspired by the textile industry, we report the development of aerogel fiber bundles with twisted structures as a promising strategy to enhance the mechanical performance and practicality of aerogel fibers. Polyimide (PI) aerogel fibers were prepared via the sol-gel confined transition method. The fibers showed a unique nanostructured assembly with high specific surface area, excellent optical transparency, outstanding flexibility at diverse extreme conditions, self-extinguishing behavior, and superior thermal insulation performance. Using PI aerogel fibers as the backbone, aerogel fiber bundles in various configurations were designed and fabricated. A systematic study was performed to analyze the effect of design parameters on the mechanical performance of the bundles. Results revealed an optimal twist level for bundles, leading to a peak in mechanical properties across various bundle configurations. The observed improvement in mechanical properties was attributed to increased fiber-to-fiber binding strength, enhanced friction, and interlocking mechanism of fibers, underscoring the potential of the optimized twist level for enhancing the performance of aerogel fiber bundles. Overall, the development of aerogel fiber bundles holds great promise in revolutionizing the production of high-performance ultralightweight materials for thermal management applications.

HNTs Improve Flame Retardant and Thermal Insulation of the PVA/CA Composite Aerogel

Porous materials are widely used in construction, batteries, electrical appliances, and other fields. In order to meet the demand for flame-retardant and thermal insulation properties of organic porous materials, in this work, poly(vinyl alcohol)/calcium alginate/halloysite nanotube (PVA/CA/HNTs) aerogels with a hierarchical pore structure at micrometer-nanometer scales were prepared through freeze-drying using PVA as the substrate. The cross-linking reactions of PVA with H3BO3 and sodium alginate (SA) with CaCl2 constructed a double cross-linking network structure within the aerogel. And the HNTs were incorporated as reinforcing agents. The experimental results showed that the PVA/CA/HNTs aerogels had excellent flame-retardant and thermal insulation properties, and the heat release rate (HRR) and total heat release (THR) were effectively reduced compared to the PVA/CA aerogel. In addition, PVA/CA/HNTs aerogels had a high limiting oxygen index (LOI 60%) and low thermal conductivity (0.040 W/m·K). While their surface was subjected to a flame (800-1000 °C) for 25 min, the temperatures of the back surface were still lower than 80 °C. The low thermal conductivity of HNTs with hollow nanotube-like structures and the excellent flame-retardant properties of CA contributed to this phenomenon. The presence of HNTs and CA facilitated the formation of a dense carbon layer during combustion, enhancing the flame retardancy for PVA. In addition, the interpenetrating cross-linking network and the unique nanopores of HNTs collectively established a hierarchical pore structure within the gel, effectively impeding substance and heat exchange between the substrate and external environment. As the flame-retardant and thermal insulating material, PVA/CA/HNTs aerogels have a promising development prospect and potential in the fields of construction, transportation, electronics, and electrical appliances.

Tuning bio-aerogel properties. Part 3: Exploring silica-pectin composite aerogels for drug delivery

The release of the model drug theophylline from silica-pectin aerogels was investigated. The composite aerogels were prepared via impregnation of pectin alcogels with silica sol, followed by in situ silica gelation and drying with supercritical CO2. The structural and physico-chemical properties of the aerogels were tuned via the preparation conditions (type of silica sol, calcium crosslinking of pectin or not). Theophylline was loaded via impregnation and its release into simulated gastric fluid was studied during 1 h followed by release into simulated intestinal fluid. The swelling, mass loss and theophylline release behavior of the composites were analyzed and correlated with material properties. It followed that only aerogels prepared with calcium-crosslinked pectin and polyethoxydisiloxane were stable in aqueous systems, exhibiting a slow theophylline release governed by near-Fickian diffusion.

Nanoporous air filtering systems made from renewable sources: benefits and challenges

There is a crucial need for air purification systems due to increasing air contamination, while conventional air-filtering materials face challenges in eliminating gaseous and particulate pollutants. This review examines the development and characteristics of nanoporous polymeric materials developed from renewable resources, which have rapidly advanced in recent years. These materials offer more sustainable alternatives for nanoporous structures made out of conventional polymers and significantly impact the properties of porous polymers. The review explores nanoporous materials' production from renewable sources, filtering mechanisms, physicochemical makeup, and sensing capabilities. The recent advancements in this field aim to enhance production techniques, lower pressure drop, and improve adsorption efficiency. Currently, supporting approaches include using adsorbent layers and binders to immobilize nanoporous materials. Furthermore, the prospects and challenges of nanoporous materials obtained from renewable sources used for air purification are discussed.

Renewable biomass-based aerogels: from structural design to functional regulation

Global population growth and industrialization have exacerbated the nonrenewable energy crises and environmental issues, thereby stimulating an enormous demand for producing environmentally friendly materials. Typically, biomass-based aerogels (BAs), which are mainly composed of biomass materials, show great application prospects in various fields because of their exceptional properties such as biocompatibility, degradability, and renewability. To improve the performance of BAs to meet the usage requirements of different scenarios, a large number of innovative works in the past few decades have emphasized the importance of micro-structural design in regulating macroscopic functions. Inspired by the ubiquitous random or regularly arranged structures of materials in nature ranging from micro to meso and macro scales, constructing different microstructures often corresponds to completely different functions even with similar biomolecular compositions. This review focuses on the preparation process, design concepts, regulation methods, and the synergistic combination of chemical compositions and microstructures of BAs with different porous structures from the perspective of gel skeleton and pore structure. It not only comprehensively introduces the effect of various microstructures on the physical properties of BAs, but also analyzes their potential applications in the corresponding fields of thermal management, water treatment, atmospheric water harvesting, CO2 absorption, energy storage and conversion, electromagnetic interference (EMI) shielding, biological applications, etc. Finally, we provide our perspectives regarding the challenges and future opportunities of BAs. Overall, our goal is to provide researchers with a thorough understanding of the relationship between the microstructures and properties of BAs, supported by a comprehensive analysis of the available data.

Biopolymer-Based Biomimetic Aerogel for Biomedical Applications

Aerogels are lightweight and highly porous materials that have been found to have great potential in biomedical research because of some of their unique properties, such as their high surface area, tunable porosity, and biocompatibility. Researchers have been exploring ways to use aerogels to create biomimetic scaffolds inspired by natural extracellular matrices (ECMs) for various biomedical applications. Aerogel scaffolds can serve as three-dimensional (3D) templates for cell growth and tissue regeneration, promoting wound healing and tissue repair. Additionally, aerogel-based scaffolds have great potential in controlled drug delivery systems, where their high surface area and porosity enable the efficient loading and release of therapeutic agents. In this review, we discuss biopolymer-based biomimetic aerogel scaffolds for tissue engineering, drug delivery, and biosensors. Finally, we also discuss the potential directions in the development of aerogel-based biomimetic scaffolds.

Advancements in Aerogel Technology for Antimicrobial Therapy: A Review

This paper explores the latest advancements in aerogel technology for antimicrobial therapy, revealing their interesting capacity that could improve the current medical approaches for antimicrobial treatments. Aerogels are attractive matrices because they can have an antimicrobial effect on their own, but they can also provide efficient delivery of antimicrobial compounds. Their interesting properties, such as high porosity, ultra-lightweight, and large surface area, make them suitable for such applications. The fundamentals of aerogels and mechanisms of action are discussed. The paper also highlights aerogels' importance in addressing current pressing challenges related to infection management, like the limited drug delivery alternatives and growing resistance to antimicrobial agents. It also covers the potential applications of aerogels in antimicrobial therapy and their possible limitations.

Porous protein crystals: synthesis and applications

Large-pore protein crystals (LPCs) are an emerging class of biomaterials. The inherent diversity of proteins translates to a diversity of crystal lattice structures, many of which display large pores and solvent channels. These pores can, in turn, be functionalized via directed evolution and rational redesign based on the known crystal structures. LPCs possess extremely high solvent content, as well as extremely high surface area to volume ratios. Because of these characteristics, LPCs continue to be explored in diverse applications including catalysis, targeted therapeutic delivery, templating of nanostructures, structural biology. This Feature review article will describe several of the existing platforms in detail, with particular focus on LPC synthesis approaches and reported applications.

Turmeric-Derived Nanoparticles Functionalized Aerogel Regulates Multicellular Networks to Promote Diabetic Wound Healing

Regulation of excessive inflammation and impaired cell proliferation is crucial for healing diabetic wounds. Although plant-to-mammalian regulation offers effective approaches for chronic wound management, the development of a potent plant-based therapeutic presents challenges. This study aims to validate the efficacy of turmeric-derived nanoparticles (TDNPs) loaded with natural bioactive compounds. TDNPs can alleviate oxidative stress, promote fibroblast proliferation and migration, and reprogram macrophage polarization. Restoration of the fibroblast-macrophage communication network by TDNPs stimulates cellular regeneration, in turn enhancing diabetic wound healing. To address diabetic wound management, TDNPs are loaded in an ultralight-weight, high swelling ratio, breathable aerogel (AG) constructed with cellulose nanofibers and sodium alginate backbones to obtain TDNPs@AG (TAG). TAG features wound shape-customized accessibility, water-adaptable tissue adhesiveness, and capacity for sustained release of TDNPs, exhibiting outstanding performance in facilitating in vivo diabetic wound healing. This study highlights the potential of TDNPs in regenerative medicine and their applicability as a promising solution for wound healing in clinical settings.

Revolutionizing Cancer Treatment: Biopolymer-Based Aerogels as Smart Platforms for Targeted Drug Delivery

Cancer stands as a leading cause of global mortality, with chemotherapy being a pivotal treatment approach, either alone or in conjunction with other therapies. The primary goal of these therapies is to inhibit the growth of cancer cells specifically, while minimizing harm to healthy dividing cells. Conventional treatments, often causing patient discomfort due to side effects, have led researchers to explore innovative, targeted cancer cell therapies. Thus, biopolymer-based aerogels emerge as innovative platforms, showcasing unique properties that respond intelligently to diverse stimuli. This responsiveness enables precise control over the release of anticancer drugs, enhancing therapeutic outcomes. The significance of these aerogels lies in their ability to offer targeted drug delivery with increased efficacy, biocompatibility, and a high drug payload. In this comprehensive review, the author discuss the role of biopolymer-based aerogels as an emerging functionalized platforms in anticancer drug delivery. The review addresses the unique properties of biopolymer-based aerogels showing their smart behavior in responding to different stimuli including temperature, pH, magnetic and redox potential to control anticancer drug release. Finally, the review discusses the application of different biopolymer-based aerogel in delivering different anticancer drugs and also discusses the potential of these platforms in gene delivery applications.

Recent advancements in implantable neural links based on organic synaptic transistors

The progress of brain synaptic devices has witnessed an era of rapid and explosive growth. Because of their integrated storage, excellent plasticity and parallel computing, and system information processing abilities, various field effect transistors have been used to replicate the synapses of a human brain. Organic semiconductors are characterized by simplicity of processing, mechanical flexibility, low cost, biocompatibility, and flexibility, making them the most promising materials for implanted brain synaptic bioelectronics. Despite being used in numerous intelligent integrated circuits and implantable neural linkages with multiple terminals, organic synaptic transistors still face many obstacles that must be overcome to advance their development. A comprehensive review would be an excellent tool in this respect. Therefore, the latest advancements in implantable neural links based on organic synaptic transistors are outlined. First, the distinction between conventional and synaptic transistors are highlighted. Next, the existing implanted organic synaptic transistors and their applicability to the brain as a neural link are summarized. Finally, the potential research directions are discussed.

Trends on Aerogel-Based Biosensors for Medical Applications: An Overview

Aerogels are unique solid-state materials composed of interconnected 3D solid networks and a large number of air-filled pores. This structure leads to extended structural characteristics as well as physicochemical properties of the nanoscale building blocks to macroscale, and integrated typical features of aerogels, such as high porosity, large surface area, and low density, with specific properties of the various constituents. Due to their combination of excellent properties, aerogels attract much interest in various applications, ranging from medicine to construction. In recent decades, their potential was exploited in many aerogels' materials, either organic, inorganic or hybrid. Considerable research efforts in recent years have been devoted to the development of aerogel-based biosensors and encouraging accomplishments have been achieved. In this work, recent (2018-2023) and ground-breaking advances in the preparation, classification, and physicochemical properties of aerogels and their sensing applications are presented. Different types of biosensors in which aerogels play a fundamental role are being explored and are collected in this manuscript. Moreover, the current challenges and some perspectives for the development of high-performance aerogel-based biosensors are summarized.

Exploring the Versatility of Aerogels: Broad Applications in Biomedical Engineering, Astronautics, Energy Storage, Biosensing, and Current Progress

Aerogels are unique and extremely porous substances with fascinating characteristics such as ultra-low density, extraordinary surface area, and excellent thermal insulation capabilities. Due to their exceptional features, aerogels have attracted significant interest from various fields, including energy, environment, aerospace, and biomedical engineering. This review paper presents an overview of the trailblazing research on aerogels, aiming at their preparation, characterization, and applications. Various methods of aerogel synthesis, such as sol-gel, supercritical drying, are discussed. Additionally, recent progress in the characterization of aerogel structures, including their morphology, porosity, and thermal properties, are extensively reviewed. Finally, aerogel's utilizations in numerous disciplines, for instance, energy storage, thermal insulation, catalysis, environmental remedy, and biomedical applications, are summarized. This review paper provides a comprehensive understanding of aerogels and their prospective uses in diverse fields, highlighting their unique properties for future research and development.

Advancement in Biosensor Technologies of 2D MaterialIntegrated with Cellulose-Physical Properties

This review paper provides an in-depth analysis of recent advancements in integrating two-dimensional (2D) materials with cellulose to enhance biosensing technology. The incorporation of 2D materials such as graphene and transition metal dichalcogenides, along with nanocellulose, improves the sensitivity, stability, and flexibility of biosensors. Practical applications of these advanced biosensors are explored in fields like medical diagnostics and environmental monitoring. This innovative approach is driving research opportunities and expanding the possibilities for diverse applications in this rapidly evolving field.