Heterojunction Engineering Enhanced Self-Polarization of PVDF/CsPbBr3 /Ti3 C2 Tx Composite Fiber for Ultra-High Voltage Piezoelectric Nanogenerator

High Performance KNN-Based Macro Fiber Composites for Human Motion Monitoring Applications

Piezoelectric materials are increasingly used in portable smart electronics and Internet of Things sensors. Among them, piezoelectric macro fiber composites (MFCs) have attracted much attention due to their architectural simplicity, scalability, and high-power density. However, most MFCs currently use toxic lead-based piezoelectric materials, hindering their applications for bio-friendly intelligent electronics. Here, a lightweight, thin, and high-performance lead-free MFC for human motion monitoring is developed using multilevel structure engineered (K,Na)NbO3-based ceramics as eco-friendly piezoelectric matrix based on delicate simulation analysis. The variation of the effective electric field and piezo-potential inside the KNN-based MFC during polarization and under different stress distributions is analyzed by using the finite element analysis method. The electrical output signals of the KNN-based MFC are tested under different deformation modes, achieving high output voltage (≈25 V), as well as high output current (≈25 µA) and instantaneous output power density of 80.42 µW cm-2. When the MFC is attached to the human body, it can sensitively convert even tiny body motion into a noticeable electrical response, with remarkable motion monitoring capabilities. This research provides a fundamental methodology for the development of lead-free MFCs, as well as an alternative material for next-generation smart sensing devices.

Recent Progress in the Auxiliary Phase Enhanced Flexible Piezocomposites

Piezocomposites with both flexibility and electromechanical conversion characteristics have been widely applied in various fields, including sensors, energy harvesting, catalysis, and biomedical treatment. In the composition of piezocomposites or their preparation process, a category of materials is commonly employed that do not possess piezoelectric properties themselves but play a crucial role in performance enhancement. In this review, the concept of auxiliary phase is first proposed to define these materials, aiming to provide a new perspective for designing high‐performance piezocomposites. Three different categories of modulation forms of auxiliary phase in piezocomposites are systematically summarized, including the modification of piezo‐matrix, the modification of piezo‐fillers, and the construction of special structures. Each category emphasizes the role of the auxiliary phase and systematically discusses the latest advancements and the physical mechanisms of the auxiliary phase enhanced flexible piezocomposites. Finally, a summary and future outlook of piezocomposites based on the auxiliary phase are provided.

Confinement synthesis of few-layer MXene-cobalt@N-doped carbon and its application for electrochemical sensing

Herein, the few-layer Ti3C2Tx nanosheets loaded zeolitic imidazolate framework-67 nanoplates (Ti3C2Tx-ZIF-67) with a unique structure has been synthesized by surfactant control method, and then is employed as the core of precursor. A thin layer of polydopamine as the shell of precursor covered Ti3C2Tx-ZIF-67 forms a micro-nano reactor, leading to the confinement carbonization process. Consequently, a novel sensing material that few-layer Ti3C2Tx nanosheets loaded Co nanoparticles coated N-doped carbon (Ti3C2Tx-Co@NC) is obtained for the non-enzymatic determination of glucose. Owing to the impressive structure, the established glucose sensor based on Ti3C2Tx-Co@NC/glassy carbon electrode exhibits 0.5-100.0 μM of linear detection range and 66.8 nM of detection limit, which tends to detect low concentration of glucose. The synergistic few-layer Ti3C2Tx nanosheets, Co nanoparticles and NC are considered through a series of control experiments. First, few-layer Ti3C2Tx nanosheets provide a good transport channel for electron transfer, resulting in the lower steric hindrance. Second, Co nanoparticles provide active centers for the electrochemical detection. Third, N-doped carbon with conductivity and hydrophilia plays the role of stabilizing material structure to prevent the fragmentation of Ti3C2Tx and the agglomeration of Co nanoparticles. Such work proposes a confined strategy to develop MXene-ZIF-67-derived nanocomposite with high-performance structure.

Recent advances in MXene-based composites for piezoelectric sensors

Piezoelectric sensors are crucial in medical, industrial, and consumer electronics applications, yet their performance and sensitivity often fall short due to the limitations in current piezoelectric materials. To address these deficiencies, significant research has been directed towards developing composite materials that enhance piezoelectric properties by integrating piezoelectric materials with various fillers. MXenes, a novel class of 2D transition metal carbides/nitrides, exhibit remarkable properties such as high electrical conductivity, mechanical strength, and chemical stability. These characteristics, along with a high surface area and hydrophilicity, make MXenes an ideal additive for preparing piezoelectric composites with improved properties. Despite existing reviews on MXenes in sensor applications, only a few have systematically explored their role in piezoelectric sensors. This review provides a comprehensive analysis of MXene-based piezoelectric sensors, examining the impact of different composites on piezoelectric properties, synthesis methods, structural designs, and application areas. While promising, challenges such as scalability, reproducibility, and environmental stability must be addressed to fully realize the potential of MXene-based composites. This comprehensive analysis highlights the advancements, opportunities for further development, and the transformative potential of MXenes in the next generation of high-performance, multifunctional piezoelectric sensors.

Exceptional Stability against Water, UV Light, and Heat for CsPbBr3@Pb-MOF Composites

All-inorganic lead halide perovskite nanocrystals (NCs) have been widely applied in optoelectronic devices owing to their excellent photoluminescence (PL) properties. However, poor stability upon exposure to water, UV light or heat strongly limits their practical application. Herein, CsPbBr3@Pb-MOF composites with exceptional stability against water, UV light, and heat are synthesized by ultrasonic processing the precursors of lead-based MOF (Pb-MOF), oleylammonium bromide (OAmBr) and cesium oleate (Cs-OA) solutions at room temperature. Pb-MOF can not only provide the lead source for the in situ growth of CsPbBr3 NCs, but also the protective layer of perovskites NCs. The formed CsPbBr3@Pb-MOF composites show a considerable PL quantum yield (PLQY) of 67.8%, and can maintain 90% of the initial PL intensity when immersed in water for 2 months. In addition, the outstanding PL stability against UV light and heat is demonstrated with CsPbBr3 NCs synthesized by the conventional method as a comparison. Finally, a green (light-emitting diode) LED is fabricated using green-emitting CsPbBr3@Pb-MOF composites and exhibits excellent stability without packaging when immersed in water for 30 days. This study provides a practical approach to improve the stability in aqueous phase, which may pave the way for future applications for various optoelectronic devices.

Construction of Dual Electric Field Synergistic and Magnetic Recyclable SnFe2O4/ZnO Photocatalyst

The recombination of photoinduced carriers hampers the photocatalysis process. Construction of the heterojunction and built-in piezoelectric field boosts the separation of electrons and holes. Herein, a novel magnetic recyclable SnFe2O4(SFO)/ZnO composite with enhanced photocatalytic performance based on the dual electric field synergism was proposed for the first time. This composite apparently alleviates the carrier recombination in SFO and extends the absorption spectrum of ZnO to the full spectrum. Consequently, 20%SFO/ZnO exhibits an excellent efficiency, which is 2.45 times that of ZnO and 4.61 times that of SFO, respectively. The differences in size and morphology between the SFO nanoparticles and the ZnO nanorods provide more contact areas, thus enlarging the deformation and enhancing the piezoelectric effect. The heterojunction and the piezoelectric field work together to modulate the transferring of carriers and elevate the photocatalytic activity. This design offers a plausible avenue for preparing efficient recyclable photocatalysts for application.

Probing Nanoscale Charge Transport Mechanisms in Quasi-2D Halide Perovskites for Photovoltaic Applications

Quasi-2D layered halide perovskites (quasi-2DLPs) have emerged as promising materials for photovoltaic (PV) applications owing to their advantageous bandgap for absorbing visible light and the improved stability they enable. Their charge transport mechanism is heavily influenced by the grain orientation of their crystals as well as their nanostructures, such as grain boundaries (GBs) and edge states─the formation of which is inevitable in polycrystalline quasi-2DLP thin films. Despite their importance, the impact of these features on charge transport remains unexplored. In this study, we conduct a detailed investigation on polycrystalline quasi-2DLP thin films and devices, carefully analyzing how grain orientation and nanostructures influence charge transport. Employing nondestructive atomic force microscopy (AFM) topography, along with transient absorption spectroscopy (TAS) and grazing-incidence wide-angle X-ray scattering (GIWAXS), we obtained significant insights regarding the phase purity, crystallographic information, and morphologies of these films. Moreover, our systematic investigation using AFM-based techniques, including Kelvin probe force microscopy (KPFM) and conductive AFM (c-AFM), elucidates the roles played by GBs and edge states in shaping charge transport behavior. In particular, the local band structure along the GBs and edge states within both vertical and parallel grains was found to selectively repel electrons and holes, thus facilitating charge carrier separation. These findings provide perspectives for the development of high-performance quasi-2DLP PV devices and highlight potential approaches that can leverage the intrinsic properties of quasi-2DLPs to advance the performance of perovskite solar cells.

From Lab to Life: Self-Powered Sweat Sensors and Their Future in Personal Health Monitoring

The rapid development of wearable sweat sensors has demonstrated their potential for continuous, non-invasive disease diagnosis and health monitoring. Emerging energy harvesters capable of converting various environmental energy sources-biomechanical, thermal, biochemical, and solar-into electrical energy are revolutionizing power solutions for wearable devices. Based on self-powered technology, the integration of the energy harvesters with wearable sweat sensors can drive the device for biosensing, signal processing, and data transmission. As a result, self-powered sweat sensors are able to operate continuously without external power or charging, greatly facilitating the development of wearable electronics and personalized healthcare. This review focuses on the recent advances in self-powered sweat sensors for personalized healthcare, covering sweat sensors, energy harvesters, energy management, and applications. The review begins with the foundations of wearable sweat sensors, providing an overview of their detection methods, materials, and wearable devices. Then, the working mechanism, structure, and a characteristic of different types of energy harvesters are discussed. The features and challenges of different energy harvesters in energy supply and energy management of sweat sensors are emphasized. The review concludes with a look at the future prospects of self-powered sweat sensors, outlining the trajectory of the field and its potential to flourish.

Enhanced Flexible Piezoelectric Nanogenerators Using Ethanol-Exfoliated g-C3N4/PVDF Composites via 3D Printing for Self-Powered Applications

This study presents the development of flexible piezoelectric nanogenerators (PENGs) utilizing graphitic carbon nitride (g-C3N4) nanoflakes (CNNFs) and polyvinylidene fluoride (PVDF) composites fabricated via the direct ink writing (DIW) 3D printing method. A novel approach of synthesizing CNNFs using the ethanol exfoliation method was demonstrated, which significantly reduces preparation time and cost compared to traditional acid exfoliation. The CNNFs are incorporated into PVDFs at varying weight percentages (5, 7.5, 10, and 15 wt.%) to optimize the β-phase content and piezoelectric properties. Characterization techniques including XRD, FTIR, and FESEM confirm the successful synthesis and alignment of nanoflakes inside the PVDF matrix. The film with 7.5% CNNF achieves the highest performance, exhibiting a peak output voltage of approximately 6.5 V under a 45 N force. This study also explores the effects of UV light exposure. Under a UV light, the film exhibits an output voltage of 8 V, indicating the device's durability and potential for practical applications. The fabricated device showed significant voltage outputs during various human motions, confirming its suitability for wearable self-powered IoT applications. This work highlights the efficacy of the ethanol exfoliation method and the DIW printing technique in enhancing the performance of flexible PENGs.

Ultrahigh sensitive and rapid-response self-powered flexible pressure sensor based on sandwiched piezoelectric composites

Flexible sensors and actuators are the basis for realizing the Internet of Everything. This study identifies specific interfacial polarization and filler dispersion challenges in flexible sensors. A novel sandwich-structured flexible sensor with polydimethylsiloxane (PDMS)-filled Nb2CTx as the interlayer and poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)]-filled barium titanate (BTO) as the upper and lower layers was designed and fabricated. The thickness of the interlayer was optimized to be 6.2 μm, resulting in an ultrahigh sensitivity of 16.05 V/N and ultrashort response time of 626 μs. The interlayer achieved an oriented arrangement of the dipoles in the upper and lower piezoelectric films through interfacial polarization, enhancing the piezoelectric output and sensitivity. The proposed mechanism was confirmed by the dielectric properties, local piezoelectric response, cross-sectional potential simulation, and interfacial electrical calculations. Additionally, the sensor effectively distinguishes various body movements, facial micro-expressions, and throat vibrations during vocalization, and can be applied to ultrahigh-sensitive self-powered flexible piezoelectric pressure sensors.

Emerging Trends of Nanofibrous Piezoelectric and Triboelectric Applications: Mechanisms, Electroactive Materials, and Designed Architectures

Over the past few decades, significant progress in piezo-/triboelectric nanogenerators (PTEGs) has led to the development of cutting-edge wearable technologies. Nanofibers with good designability, controllable morphologies, large specific areas, and unique physicochemical properties provide a promising platform for PTEGs for various advanced applications. However, the further development of nanofiber-based PTEGs is limited by technical difficulties, ranging from materials design to device integration. Herein, the current developments in PTEGs based on electrospun nanofibers are systematically reviewed. This review begins with the mechanisms of PTEGs and the advantages of nanofibers and nanodevices, including high breathability, waterproofness, scalability, and thermal-moisture comfort. In terms of materials and structural design, novel electroactive nanofibers and structure assemblies based on 1D micro/nanostructures, 2D bionic structures, and 3D multilayered structures are discussed. Subsequently, nanofibrous PTEGs in applications such as energy harvesters, personalized medicine, personal protective equipment, and human-machine interactions are summarized. Nanofiber-based PTEGs still face many challenges such as energy efficiency, material durability, device stability, and device integration. Finally, the research gap between research and practical applications of PTEGs is discussed, and emerging trends are proposed, providing some ideas for the development of intelligent wearables.

CsPbI3-PVDF Composite-Based Multimode Hybrid Piezo-Triboelectric Nanogenerator: Self-Powered Moisture Monitoring System

For several decades, the development of potential flexible electronics, such as electronic skin, wearable technology, environmental monitoring systems, and the internet of Things network, has been emphasized. In this context, piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs) are highly regarded due to their simple design, high output performance, and cost-effectiveness. On a smaller scale, self-powered sensor research and development based on piezo-triboelectric hybrid nanogenerators have lately become more popular. When a material in the TENG is a piezoelectric material, these two distinct effects can be coupled. Herein, we developed a multimode hybrid piezo-triboelectric nanogenerator using the CsPbI3-PVDF composite. The addition of CsPbI3 to PVDF significantly enhances its electroactive phase and dielectric property, thereby enhancing its surface charge density. 5 wt % CsPbI3 incorporation in poly(vinylidene difluoride) (PVDF) results in a high electroactive phase (FEA) value of >90%. Moreover, CsPbI3-PVDF composite-based PENGs were fabricated in three modes, viz., nanogenerators in contact-separation mode (TECS), single electrode mode (TESE), and sliding mode (TES), and the output performance of all the devices was investigated. The fabricated TECS, TESE, and TES reveal peak output powers of 3.08, 1.29, and 0.15 mW at an external load of 5.6 MΩ. Through analysis of the contact angle measurement and experimental quantification, the hydrophilicity of the composite film has been identified. The hydrophobicity and moisture absorption capacity of CsPbI3-PVDF film make it an attractive option for self-powered humidity monitoring. The TENGs effectively powered several low-powered electronic devices with just a few human finger taps. This study offers a high-performance PTENG device that is reliant on ambient humidity, which is a helpful step toward creating a self-powered sensor.

3D-Printed piezoelectric nanogenerator with aligned graphitic carbon nitrate nanosheets for enhancing piezoelectric performance

Carbon-based materials are attracting increasing attention in the field of electronic devices because of their nontoxicity, availability, low cost, and easy synthesis. In this study, we fabricated a printed piezoelectric nanogenerator (PENG) based on a Polyvinylidene fluoride (PVDF) and graphitic carbon nitrate (g-C3N4) composite. Piezoelectric films with different weight percentages (0, 5, 7.5, 10, and 15 wt%) of g-C3N4 nanosheets (CNNSs) were fabricated. The PVDF/CNNS with 7.5% CNNS exhibited higher performance. We observed that the printing process aligned all CNNS along the x-axis, which improved stress management and eventually improved the performance of the fabricated device. The fabricated device exhibited better performance without pooling and generated a peak-to-peak voltage of 6.65 V with a current of 0.195 µA, corresponding to a power density of 4.86 µW/cm2. The device generated a voltage of up to 18.8 V with footsteps.

Improved Energy Harvesting Ability of Single-Layer Binary Fiber Nanocomposite Membrane for Multifunctional Wearable Hybrid Piezoelectric and Triboelectric Nanogenerator and Self-Powered Sensors

While wearable self-powered electronic devices have shown promising improvements, substantial challenges persist in enhancing their electrical output and structural performance. In this work, a working mechanism involving simultaneous piezoelectric and triboelectric conversion within a monolayer-structured membrane is proposed. Single-layer binary fiber nanocomposite membranes (SBFNMs) (PVDF/CNTX@PAN/CNTX, DPCPCX) with two distinct interpenetrating nanocomposite fibers were created through co-electrospinning, incorporating multiwalled carbon nanotubes (CNTs) into polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN), respectively. The resulting membrane demonstrated an exceptional synergistic effect of piezoelectricity and triboelectricity along with a high machine-to-electric conversion capability. The addition of CNTs increased the PVDF β-phase and the PAN planar zigzag conformation. As a result, the DPCPC0.5-SBFNMs-based piezoelectric nanogenerator exhibited excellent electrical output (187 V, 8.0 μA, and 1.52 W m-2), maintaining an exceptionally high level of output voltage compared with other piezoelectric nanogenerators. It successfully illuminated 50 commercial light-emitting diodes simultaneously. The output voltage of DPCPC0.5-SBFNMs was 5.1 and 4.6 times higher than that of PAN or PVDF single-fiber membranes, respectively. Furthermore, the peak voltage of DPCPC0.5-SBFNMs exceeded that of co-electrospinning PVDF/CNT1.0@PAN (DPCP1.0) and PVDF@PAN/CNT1.0 (DPPC1.0) by 20 and 10 V, respectively. The piezoelectric sensor made of DPCPC0.5-SBFNMs accurately sensed human movement, ranging from tiny to large, and demonstrated utility as an alarm in medical treatment, fire fighting, and monitoring. Endogenous triboelectricity is proposed in SBFNM piezoelectric materials, enhancing electromechanical conversion and electrical output capacity, thereby promising a wide application potential in self-powered wearable electronic devices.

Giant Piezoelectric Output and Stability Enhancement in Piezopolymer Composites with Liquid Metal Nanofillers

Integrating nanomaterials into the polymer matrix is an effective strategy to optimize the performance of polymer-based piezoelectric devices. Nevertheless, the trade-off between the output enhancement and stability maintenance of piezoelectric composites usually leads to an unsatisfied overall performance for the high-strength operation of devices. Here, by setting liquid metal (LM) nanodroplets as the nanofillers in a poly(vinylidene difluoride) (PVDF) matrix, the as-formed liquid-solid/conductive-dielectric interfaces significantly promote the piezoelectric output and the reliability of this piezoelectric composite. A giant performance improvement featured is obtained with, nearly 1000% boosting on the output voltage (as high as 212 V), 270% increment on the piezoelectric coefficient (d33 ∼51.1 pC N-1 ) and long-term reliability on both structure and output (over 36 000 cycles). The design of a novel heterogenous interface with both mechanical matching and electric coupling can be the new orientation for developing high performance piezoelectric composite-based devices.

Heterojunction Engineering Enhanced Self-Polarization of PVDF/CsPbBr3 /Ti3 C2 Tx Composite Fiber for Ultra-High Voltage Piezoelectric Nanogenerator

Piezoelectric nanogenerator (PENG) for practical application is constrained by low output and difficult polarization. In this work, a kind of flexible PENG with high output and self-polarization is fabricated by constructing CsPbBr3 -Ti3 C2 Tx heterojunctions in PVDF fiber. The polarized charges rapidly migrate to the electrodes from the Ti3 C2 Tx nanosheets by forming heterojunctions, achieving the maximum utilization of polarized charges and leading to enhanced piezoelectric output macroscopically. Optimally, PVDF/4wt%CsPbBr3 /0.6wt%Ti3 C2 Tx -PENG exhibits an excellent voltage output of 160 V under self-polarization conditions, which is higher than other self-polarized PENG previously. Further, the working principle and self-polarization mechanism are uncovered by calculating the interfacial charge and electric field using first-principles calculation. In addition, PVDF/4wt%CsPbBr3 /0.6wt%Ti3 C2 Tx -PENG exhibits better water and thermal stability attributed to the protection of PVDF. It is also evaluated in practice by harvesting the energy from human palm taps and successfully lighting up 150 LEDs and an electronic watch. This work presents a new idea of design for high-performance self-polarization PENG.