Frustrated Lewis pairs on pentacoordinated Al3+-enriched Al2O3 promote heterolytic hydrogen activation and hydrogenation

As an emerging class of metal-free catalysts, frustrated Lewis pairs (FLPs) catalysts have been greatly constructed and applied in many fields. Homogeneous FLPs have witnessed significant development, while limited heterogeneous FLPs catalysts are available. Herein, we report that heterogeneous FLPs on pentacoordinated Al3+-enriched Al2O3 readily promote the heterolytic activation of H2 and thus hydrogenation catalysis. The defect-rich Al2O3 was prepared by simple calcination of a carboxylate-containing Al precursor. Combinatorial studies confirmed the presence of rich FLPs on the surface of the defective Al2O3. In contrast to conventional alumina (γ-Al2O3), the FLP-containing Al2O3 can activate H2 in the absence of any transition metal species. More importantly, H2 was activated by surface FLPs in a heterolytic pathway, leading to the hydrogenation of styrene in a stepwise process. This work paves the way for the exploration of more underlying heterogeneous FLPs catalysts and further understanding of accurate active sites and catalytic mechanisms of heterogeneous FLPs at the molecular level.

Prediction of Stable Surfaces of Metal Oxides through the Unsaturated Coordination Index

This study proposes the unsaturated coordination index, σ, as a potential descriptor of the stability of metal-oxide surfaces cleaved from bulk. The value of σ, the number of missing bonds per unit area, can be obtained very quickly using only crystallographic data, namely, the bulk geometry. The surface energies of various binary oxides, with and without atom relaxation, were calculated. Their correlations with σ had good coefficients of determination (R2) values, particularly in high-symmetry crystals. The proposed descriptor is very useful for an initial evaluation of stable metal-oxide surfaces without conducting any surface model calculations.

Enhancing polyol/sugar cascade oxidation to formic acid with defect rich MnO2 catalysts

Oxidation of renewable polyol/sugar into formic acid using molecular O₂ over heterogeneous catalysts is still challenging due to the insufficient activation of both O₂ and organic substrates on coordination-saturated metal oxides. In this study, we develop a defective MnO₂ catalyst through a coordination number reduction strategy to enhance the aerobic oxidation of various polyols/sugars to formic acid. Compared to common MnO₂, the tri-coordinated Mn in the defective MnO₂ catalyst displays the electronic reconstruction of surface oxygen charge state and rich surface oxygen vacancies. These oxygen vacancies create more Mn^δ+ Lewis acid site together with nearby oxygen as Lewis base sites. This combined structure behaves much like Frustrated Lewis pairs, serving to facilitate the activation of O₂, as well as C-C and C-H bonds. As a result, the defective MnO₂ catalyst shows high catalytic activity (turnover frequency: 113.5 h^-1) and formic acid yield (>80%) comparable to noble metal catalysts for glycerol oxidation. The catalytic system is further extended to the oxidation of other polyols/sugars to formic acid with excellent catalytic performance.

Assessing the Effect of Dopants on the C-H Activation Activity of γ-Al2 O3 using First-Principles Calculations

In recent years, the high availability of methane in the shale gas reserves has raised significant interest in its conversion to high-value chemicals but this process is still not commercially viable. Metal oxides, due to their surface heterogeneity and the presence of Lewis acidic and basic site pairs are known to facilitate the activation of C-H bonds of methane. In this work, we investigate the C-H bond activation of methane on pristine and doped γ-Al₂ O₃ clusters using density functional theory (DFT) calculations. Our results demonstrate that the polar pathway is energetically preferred over the radical pathway on these systems. We found that the metal dopants (boron and gallium) not only alter the catalytic activity of dopant sites but this effect is more pronounced on some of the adjacent sites (non-local). Among the selected dopants, gallium greatly improves the catalytic activity on most of the site pairs (including most active and least active) of pristine γ-Al₂ O₃ . Additionally, we identified a correlation between H₂ binding energies and the C-H activation free energies on Ga-doped γ-Al₂ O₃ .

Frustrated Lewis Pair in Zeolite Cages for Alkane Activations

The frustrated Lewis pair (FLP) concept in homogeneous catalysis was extended to heterogeneous catalysis via the supramolecular system of FLP between deprotonated zeolite framework oxygens and confined carbocations in methanol-to-olefin (MTO) reactions. In this FLP, the polymethylbenzenium (PMB⁺ ) functioned as the Lewis acid to accept an electron pair, and the deprotonated framework oxygen site acted as the Lewis base to donate an electron pair. This FLP theoretically demonstrated the ability to undergo H₂ heterolysis and alkanes dehydrogenation, and this was further confirmed by gas chromatography-mass spectrometer (GC-MS) catalytic experiments inside FLP-containing chabazite zeolites. All these findings not only bring new recognition to the carbocation chemistry in zeolite cages but also put forward a new reaction pathway as one part of MTO reactions.

The Effect of Pristine and Hydroxylated Oxide Surfaces on the Guaiacol HDO Process: A DFT Study

The acid‐base character of oxide supports is crucial for catalytic reactions. In this work, the acid‐base properties of five oxide surfaces common in heterogeneous catalysis were investigated and related to their interaction with monolignol compounds derived from lignin. We have used density functional theory simulations also to understand the role of the surfaces’ hydroxylation state. The results show that moderate hydroxyl coverage on the amphoteric γ‐Al₂O₃ (110) slightly strengthens the oxy‐compounds’ adsorption due to an increase in Lewis acidity. Similarly, low hydroxyl coverage on the reducible TiO₂ (101) enlarges its adsorption capacity by up to 42 % compared with its clean surface. The higher affinity is attributed to the more favourable interaction between the surface‐OH groups and the aromatic rings. Overall, the results indicate that hydroxyl coverage enhances the amphoteric and reducible adsorption capacity towards aromatic species.

Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ-Alumina*

γ-alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large-scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ-alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid-state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O)₅ Al(VI)-OH sites on the (100) segments of massively restructured (110) facets on typical rhombus-platelet γ-alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ-alumina samples) responsible for its unique catalytic activity. Such (O)₅ Al(VI)-OH sites are also present on the macroscopically defined (100) facets of γ-alumina with elongated/rod-like geometry. The mechanism by which these sites lose -OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta-coordinate Al⁺³ O₅ sites is clarified. These coordinatively unsaturated penta-coordinate Al sites produce well-defined thermally stable Al-carbonyl complexes. Our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ-alumina and their role as catalytically active sites.

An Eco-Friendly Fluidizable FexOy/CaO-γ-Al2O3 Catalyst for Tar Cracking during Biomass Gasification

The present study deals with the development, characterization, and performance evaluation of an eco-friendly catalyst, using 2-methoxy-4-methylphenol (2M4MP) as a surrogate tar. The 2M4MP was selected due to its chemical functionalities and the fact that it is a good model compound to represent the tar formed during biomass low temperature gasification. The eco-friendly catalyst was prepared using the typical Fe and Ca minerals which are present in ash. These ash components were added to a fluidizable γ-Al2O3 support using a multistep incipient impregnation, yielding Fe oxides as an active phase and CaO as the promoter. The prepared catalyst displayed a 120 m2/g BET specific surface area, with few γ-Al2O3 bulk phase changes, as observed with XRD. TPD-NH3 and pyridine FTIR allowed us to show the significant influence of CaO reduced support acidity. A TPR analysis provided evidence of catalyst stability during consecutive reduction–oxidation cycles. Furthermore, catalyst evaluation vis-à-vis catalytic steam 2M4MP gasification was performed using the fluidized CREC riser simulator. The obtained results confirm the high performance of the developed catalyst, with 2M4MP conversion being close to 100% and with selectivities of up to 98.6% for C1-C2 carbon-containing species, at 500 °C, with a 7.5 s reaction time and 1.5 g steam/g 2M4MP. These high tar conversions are promising efficiency indicators for alumina catalysts doped with Fe and Ca. In addition, the used catalyst particles could be blended with biochar to provide an integrated solid supplement that could return valuable mineral supplements to the soil.

Probing Interactions of γ-Alumina with Water via Multinuclear Solid-State NMR Spectroscopy

Interaction of γ-alumina with water are important in controlling its structure and catalytic properties. We apply solid-state multinuclear NMR spectroscopy to investigate this interaction by monitoring ¹H and ¹⁷O spectra in real-time. Surface-selective detection is made possible by adsorbing ¹⁷O-enriched water on γ-alumina nanorods. Structural evolution on the surface was selectively probed by ¹H/¹⁷O double resonance NMR and ²⁷Al NMR at ultrahigh 35.2 T magnetic field. Formation of hydroxyl species on the surface of nanorods is rapid upon the exposure of water, which involves low coordinated aluminum ions with doubly bridging and isolated hydroxyl species being generated first. Fast exchange occurs between oxygen atoms in the water molecules and bare surface sites, indicating high reactivity of these oxygen species. These results provide new insights into the structure and dynamics on the surface of γ-alumina and the methods applied here can be extended to study the interaction of other oxides with water.

Cooperativity between Al Sites Promotes Hydrogen Transfer and Carbon-Carbon Bond Formation upon Dimethyl Ether Activation on Alumina

The methanol-to-olefin (MTO) process allows the conversion of methanol/dimethyl ether into olefins on acidic zeolites via the so-called hydrocarbon pool mechanism. However, the site and mechanism of formation of the first carbon-carbon bond are still a matter of debate. Here, we show that the Lewis acidic Al sites on the 110 facet of γ-Al2O3 can readily activate dimethyl ether to yield CH4, alkenes, and surface formate species according to spectroscopic studies combined with a computational approach. The carbon-carbon forming step as well as the formation of methane and surface formate involves a transient oxonium ion intermediate, generated by a hydrogen transfer between surface methoxy species and coordinated methanol on adjacent Al sites. These results indicate that extra framework Al centers in acidic zeolites, which are associated with alumina, can play a key role in the formation of the first carbon-carbon bond, the initiation step of the industrial MTO process.

Aminosilanes grafted to basic alumina as CO2 adsorbents--role of grafting conditions on CO2 adsorption properties

Solid oxide-supported amine sorbents for CO2 capture are amongst the most rapidly developing classes of sorbent materials for CO2 capture. Herein, basic γ supports are used as hosts for amine sites through the grafting of 3-aminopropyltrimethoxysilane to the alumina surface under a variety of conditions, yielding the expected surface-grafted alkylamine groups, as demonstrated by FTIR spectroscopy and (29)Si and (13)C cross-polarization magic-angle spinning (CPMAS NMR) spectroscopy. Grafting amine sites on the surface in the presence of water leads to a high density of amine sites on the surface whereas simultaneously creating a unique type of aluminum species on the surface, as demonstrated by both 1D and 2D (27)Al MAS NMR spectroscopy. The thus prepared sorbents result in higher CO2 adsorption capacities and amine efficiencies compared to sorbents prepared in the absence of water or similar amine loading sorbents prepared using silica supports. In situ FTIR spectra of the sorbents exposed to CO2 at various pressures show no distinct difference in the nature of the adsorbed CO2 species on alumina- versus silica-supported amines, whereas water adsorption isotherms show that the improved performance of the amine-grafted alumina support is not a consequence of retained water on the more hydrophobic aminoalumina materials. The findings demonstrate that amine-grafted, basic alumina materials can be tuned to be more efficient than the corresponding silica-supported materials at comparable amine loadings, further demonstrating that the properties of amine sites can be tuned by controlling or adjusting the support surface properties.