Dynamic Photocontrol of the Coffee-Ring Effect with Optically Tunable Particle Stickiness

Versatile strategy for homogeneous drying patterns of dispersed particles

After spilling coffee, a tell-tale stain is left by the drying droplet. This universal phenomenon, known as the coffee ring effect, is observed independent of the dispersed material. However, for many technological processes such as coating techniques and ink-jet printing a uniform particle deposition is required and the coffee ring effect is a major drawback. Here, we present a simple and versatile strategy to achieve homogeneous drying patterns using surface-modified particle dispersions. High-molecular weight surface-active polymers that physisorb onto the particle surfaces provide enhanced steric stabilization and prevent accumulation and pinning at the droplet edge. In addition, in the absence of free polymer in the dispersion, the surface modification strongly enhances the particle adsorption to the air/liquid interface, where they experience a thermal Marangoni backflow towards the apex of the drop, leading to uniform particle deposition after drying. The method is independent of particle shape and applicable to a variety of commercial pigment particles and different dispersion media, demonstrating the practicality of this work for everyday processes.

Patterning of Metallic Nanoparticles over Solid Surfaces from Sessile Droplets by Thermoplasmonically Controlled Liquid Flow

Optically controlled assembly of suspended particles from evaporating sessile droplets is an emerging method to realize on-demand patterning of particles over solid substrates. Most of the reported strategies rely either on additives or surface texturing to modulate particle deposition. Though dynamic control over the assembly of microparticles is possible, limited success has been achieved in nanoparticle patterning, especially in the case of metallic nanoparticles. This work demonstrates a simple light-directed patterning of gold (Au) nanoparticles based on the thermoplasmonically controlled liquid flow. Excitation at the plasmonic wavelength (532 nm) generates the required temperature gradient, resulting in the particle assembly at the irradiation zone in response to the thermocapillary flow created inside the droplet. Particle streak velocimetry experiments and analysis confirm the existence of a strong thermocapillary flow, which counteracts the naturally occurring evaporative convection flows. By modulating the illumination conditions, we could achieve patterns with various morphologies, including center deposit, off-center deposit, multi-spot deposit, and lines. We successfully applied the developed strategy for realizing closely packed hybrid particle assembly containing different particles: Au and polystyrene particles (PS). We performed optical microscopy, 3D profilometry, and SEM analysis to characterize the particle deposit. We analyzed the periodicity of Au-PS hybrid assembly using fast Fourier transform and radial distribution function analysis. PS particles formed a hexagonal close-packed arrangement at the irradiation zone, with Au NPs residing inside the voids. We believe that the presented strategy could significantly enhance the applicability of the evaporative lithography from sessile droplets for the programmable patterning of metallic nanoparticles.

The Possibility of Changing the Wettability of Material Surface by Adjusting Gravity

The contact angle, as a vital measured parameter of wettability of material surface, has long been in dispute whether it is affected by gravity. Herein, we measured the advancing and receding contact angles on extremely low contact angle hysteresis surfaces under different gravities (1-8G) and found that both of them decrease with the increase of the gravity. The underlying mechanism is revealed to be the contact angle hysteresis and the deformation of the liquid-vapor interface away from the solid surface caused by gradient distribution of the hydrostatic pressure. The real contact angle is not affected by gravity and cannot measured by an optical method. The measured apparent contact angles are angles of inclination of the liquid-vapor interface away from the solid surface. Furthermore, a new equation is proposed based on the balance of forces acting on the three-phase contact region, which quantitatively reveals the relation of the apparent contact angle with the interfacial tensions and gravity. This finding can provide new horizons for solving the debate on whether gravity affects the contact angle and may be useful for the accurate measurement of the contact angle and the development of a new contact angle measurement system.

Multi-primary-color quantum-dot down-converting films for display applications

We propose and fabricate a multi-primary-color (MPC) quantum-dot down-converting film (QDDCF). A four-primary-color QDDCF composed of red (R), yellowish green (YG), bluish green (BG), and blue (B) subpixels was fabricated via totally five rounds of photolithographic processes. A verification platform was built up using a laser projector, and the measured results show that the QD film can expand display color gamut to 118.60% of Rec. 2020 and can cover the entire Pointer's gamut. The issues of blue light absorption and film thickness are analyzed in detail. The combination of MPC technology and QDDCF is a potential strategy to realize ultra wide color gamut for emerging display technologies.

Photoswitchable Dissipative Two-Dimensional Colloidal Crystals

Control over particle interactions and organization at fluid interfaces is of great importance both for fundamental studies and practical applications. Rendering these systems stimulus-responsive is thus a desired challenge both for investigating dynamic phenomena and realizing reconfigurable materials. Here, we describe the first reversible photocontrol of two-dimensional colloidal crystallization at the air/water interface, where millimeter-sized assemblies of microparticles can be actuated through the dynamic adsorption/desorption behavior of a photosensitive surfactant added to the suspension. This allows us to dynamically switch the particle organization between a highly crystalline (under light) and a disordered (in the dark) phase with a fast response time (crystallization in ≈10 s, disassembly in ≈1 min). These results evidence a new kind of dissipative system where the crystalline state can be maintained only upon energy supply.

Micro-/Nanofluidics for Liquid-Mediated Patterning of Hybrid-Scale Material Structures

Various materials are fabricated to form specific structures/patterns at the micro-/nanoscale, which exhibit additional functions and performance. Recent liquid-mediated fabrication methods utilizing bottom-up approaches benefit from micro-/nanofluidic technologies that provide a high controllability for manipulating fluids containing various solutes, suspensions, and building blocks at the microscale and/or nanoscale. Here, the state-of-the-art micro-/nanofluidic approaches are discussed, which facilitate the liquid-mediated patterning of various hybrid-scale material structures, thereby showing many additional advantages in cost, labor, resolution, and throughput. Such systems are categorized here according to three representative forms defined by the degree of the free-fluid-fluid interface: free, semiconfined, and fully confined forms. The micro-/nanofluidic methods for each form are discussed, followed by recent examples of their applications. To close, the remaining issues and potential applications are summarized.

Highly Flexible and Ultraprecise Manipulation of Light-Levitated Femtoliter/Picoliter Droplets

Ultraprecise manipulation of the droplets at the microscale is a promising paradigm for broad implications in reagent transport and element analysis, but the existing strategies still suffer from cross-contamination or the miscellaneous auxiliaries. Inspired by the levitation, we develop a method for excellently manipulating levitated femtoliter/picoliter droplets by a single focused laser. We show that the unique light-induced vapor flow in association with the interface morphology is responsible for creation and manipulation of levitated droplets. In particular, we demonstrate that the levitated droplets formed by this light method show extraordinary motility. The highly accurate two-dimensional labyrinth movement of the levitated droplets with designed trajectories above the free surface is easily realized by scanning the light. These results demonstrate that a single focused light can function as an "optical baton" to enable us to construct a wide variety of the long-sought precise manipulation systems for bioassays, pharmacy, and chemosynthesis.

Flexible, Transparent, Thickness-Controllable SWCNT/PEDOT:PSS Hybrid Films Based on Coffee-Ring Lithography for Functional Noncontact Sensing Device

Flexible transparent conductive films (FTCFs) as the essential components of the next generation of functional circuits and devices are presently attracting more attention. Here, a new strategy has been demonstrated to fabricate thickness-controllable FTCFs through coffee ring lithography (CRL) of single-wall carbon nanotube (SWCNT)/poly(3,4-ethylenedioxythiophene)-polystyrenesulfonate (

PEDOT

PSS) hybrid ink. The influence of ink concentration and volume on the thickness and size of hybrid film has been investigated systematically. Results show that the final FTCFs present a high performance, including a homogeneous thickness of 60-65 nm, a sheet resistance of 1.8 kohm/sq, a visible/infrared-range transmittance (79%, PET = 90%), and a dynamic mechanical property (>1000 cycle, much better than ITO film), respectively, when SWCNT concentration is 0.2 mg/mL, ink volume is 0.4 μL, drying at room temperature. Moreover, the benefits of these kinds of FTCFs have been verified through a full transparent, flexible noncontact sensing panel (3 × 4 sensing pixels) and a flexible battery-free wireless sensor based on a humidity sensing mechanism, showing excellent human/machine interaction with high sensitivity, good stability, and fast response/recovery ability.