Synthesis of Renewable meta ‐Xylylenediamine from Biomass‐Derived Furfural

Synthesis of Cyclopentadiene and Methylcyclopentadiene with Xylose or Extracted Hemicellulose

Cyclopentadiene (CPD) and methylcyclopentadiene (MCPD) are important intermediates that have been widely used in the production of high-energy-density rocket fuels, polymers and valuable chemicals. Currently, CPD and MCPD are produced from fossil energies at very low yields, which greatly limits their application. As a solution to this problem, we disclose an alternative two-step bio-route to access CPD and MCPD using xylose or extracted hemicellulose as the feedstock. In the first step, cyclopentanone (CPO) was directly produced by the selective hydrogenolysis of xylose or extracted hemicellulose over a commercial Ru/C catalyst in an acid-free toluene/NaCl aqueous solution biphasic system. In the second step, CPO was selectively converted to CPD by a cascade hydrodeoxygenation/dehydrogenation reaction over zinc molybdate catalysts. When methanol was introduced with CPO and hydrogen, MCPD was selectively obtained by a cascade dehydrogenation/aldol condensation/selective hydrodeoxygenation reaction over zinc molybdate catalysts.

Targeting Valuable Chemical Commodities: Hydrazine-mediated Diels-Alder Aromatization of Biobased Furfurals

A hydrazine-mediated approach towards renewable aromatics production via Diels-Alder aromatization of readily available, biobased furfurals was explored as alterative to the more classical approaches that rely on reactive but uneconomical reduced dienes (e. g., 2,5-dimethylfuran). To enable cycloaddition chemistry with these otherwise unreactive formyl furans, substrate activation by N,N-dimethyl hydrazone formation was investigated. The choice of the reaction partner was key to the success of the transformation, and in this respect acrylic acid showed the most promising results in the synthesis of aromatics. This strategy allowed for selectivities up to 60 % for a complex transformation consisting of Diels-Alder cycloaddition, oxabridge opening, decarboxylation, and dehydration. Exploration of the furfural scope yielded generic structure-reactivity-stability relationships. The proposed methodology enabled the redox-efficient, operationally simple, and mild synthesis of renewable (p-disubstituted) aromatics of commercial importance under remarkably mild conditions.

The Interplay between Kinetics and Thermodynamics in Furan Diels-Alder Chemistry for Sustainable Chemicals Production

Biomass-derived furanic platform molecules have emerged as promising building blocks for renewable chemicals and functional materials. To this aim, the Diels-Alder (DA) cycloaddition stands out as a versatile strategy to convert these renewable resources in highly atom-efficient ways. Despite nearly a century worth of examples of furan DA chemistry, clear structure-reactivity-stability relationships are still to be established. Detailed understanding of the intricate interplay between kinetics and thermodynamics in these very particular [4+2] cycloadditions is essential to push further development and truly expand the scope beyond the ubiquitous addend combinations of electron-rich furans and electron-deficient olefins. Herein, we provide pertinent examples of DA chemistry, taken from various fields, to highlight trends, establish correlations and answer open questions in the field with the aim to support future efforts in the sustainable chemicals and materials production.

Green Carbon Science: Efficient Carbon Resource Processing, Utilization, and Recycling Towards Carbon Neutrality

Green carbon science is defined as "Study and optimization of the transformation of carbon containing compounds and the relevant processes involved in the entire carbon cycle from carbon resource processing, carbon energy utilization, and carbon recycling to use carbon resources efficiently and minimize the net CO2 emission." [1] Green carbon science is related closely to carbon neutrality, and the relevant fields have developed quickly in the last decade. In this Minireview, we proposed the concept of carbon energy index, and the recent progresses in petroleum refining, production of liquid fuels, chemicals, and materials using coal, methane, CO2, biomass, and waste plastics are highlighted in combination with green carbon science, and an outlook for these important fields is provided in the final section.

Production of Copolyester Monomers from Plant-Based Acrylate and Acetaldehyde

PCTA is an important copolyester that has been widely used in our daily necessities. Currently, its monomers are industrially produced from petroleum-derived xylene. To reduce the reliance on fossil energy, we herein disclose an alternative route to access PCTA monomer (terephthalate/isophthalate=2.4/1) in 61 % overall yield using plant-based acrylate and acetaldehyde as the feedstocks. The process includes Morita-Baylis-Hillman (MBH) reaction of acetaldehyde with acrylate, subsequent one-step dehydration/Diels-Alder reaction with acrylate over H₂ SO₄ /SiO₂ catalyst, and final Pd/C-catalyzed dehydrogenation. Besides, when varying the final step to hydrogenation, another important monomer UNOXOL™ diol (1,4-trans/1,4-cis/1,3-trans/1,3-cis=5.2/2/2.5/1) can be produced in 67 % overall yield.

Recent Advances on Diels-Alder-Driven Preparation of Bio-Based Aromatics

The preparation of high value-added chemicals from renewable resources is a crucial approach towards a sustainable economy. One prominent alternative to the production of petroleum-based chemicals from fossil resources is through the sequential Diels-Alder/aromatization reactions of biomass-derived furan platforms. This Concept is focused on the recent boom in bio-based furan DA strategies for aromatization of bio-based platform chemicals, particularly that of furfurals, ranging from indirect use and activation strategies to recent examples of direct DA reaction of these electron-withdrawing biomass-derived furans.

A Combined Experimental-Theoretical Study on Diels-Alder Reaction with Bio-Based Furfural: Towards Renewable Aromatics

The synthesis of relevant renewable aromatics from bio-based furfural derivatives and cheap alkenes is carried out by using a Diels-Alder/aromatization sequence. The prediction and the control of the ortho/meta selectivity in the Diels-Alder step is an important issue to pave the way to a wide range of renewable aromatics, but it remains a challenging task. A combined experimental-theoretical approach reveals that, as a general trend, ortho and meta cycloadducts are the kinetic and thermodynamic products, respectively. The nature of substituents, both on the dienes and dienophiles, significantly impacts the feasibility of the reaction, through a modulation on the nucleo- and electrophilicity of the reagents, as well as the ortho/meta ratio. We show that the ortho/meta selectivity at the reaction equilibrium stems from a subtle interplay between charge interactions, favoring the ortho products, and steric interactions, favoring the meta isomers. This work also points towards a path to optimize the aromatization step.

Dynamic Trapping as a Selective Route to Renewable Phthalide from Biomass-Derived Furfuryl Alcohol

A novel route for the production of the versatile chemical building block phthalide from biorenewable furfuryl alcohol and acrylate esters is presented. Two challenges that limit sustainable aromatics production via Diels-Alder (DA) aromatisation-an unfavourable equilibrium position and undesired regioselectivity when using asymmetric addends-were addressed using a dynamic kinetic trapping strategy. Activated acrylates were used to speed up the forward and reverse DA reactions, allowing for one of the four DA adducts to undergo a selective intramolecular lactonisation reaction in the presence of a weak base. The adduct is removed from the equilibrium pool, pulling the system completely to the product with a fixed, desired regiochemistry. A single 1,2-regioisomeric lactone product was formed in up to 86 % yield and the acrylate activating agent liberated for reuse. The lactone was aromatised to give phthalide in almost quantitative yield in the presence of Ac2 O and a catalytic amount of strong acid, or in 79 % using only catalytic acid.

Integrating Biomass into the Organonitrogen Chemical Supply Chain: Production of Pyrrole and d-Proline from Furfural

Production of renewable, high-value N-containing chemicals from lignocellulose will expand product diversity and increase the economic competitiveness of the biorefinery. Herein, we report a single-step conversion of furfural to pyrrole in 75 % yield as a key N-containing building block, achieved via tandem decarbonylation-amination reactions over tailor-designed Pd@S-1 and H-beta zeolite catalytic system. Pyrrole was further transformed into dl-proline in two steps following carboxylation with CO₂ and hydrogenation over Rh/C catalyst. After treating with Escherichia coli, valuable d-proline was obtained in theoretically maximum yield (50 %) bearing 99 % ee. The report here establishes a route bridging commercial commodity feedstock from biomass with high-value organonitrogen chemicals through pyrrole as a hub molecule.

Making JP-10 Superfuel Affordable with a Lignocellulosic Platform Compound

The synthesis of renewable jet fuel from lignocellulosic platform compounds has drawn a lot of attention in recent years. So far, most work has concentrated on the production of conventional jet fuels. JP-10 is an advanced jet fuel currently obtained from fossil energy. Due to its excellent properties, JP-10 has been widely used in military aircraft. However, the high price and low availability limit its application in civil aviation. Here, we report a new strategy for the synthesis of bio-JP-10 fuel from furfuryl alcohol that is produced on an industrial scale from agricultural and forestry residues. Under the optimized conditions, bio-JP-10 fuel was produced with high overall carbon yields (≈65 %). A preliminary economic analysis indicates that the price of bio-JP-10 fuel can be greatly decreased from ≈7091 US$/ton (by fossil route) to less than 5600 US$/ton using our new strategy. This work makes the practical application of bio-JP-10 fuel forseeable.

When Will 5-Hydroxymethylfurfural, the "Sleeping Giant" of Sustainable Chemistry, Awaken?

Bring on the subs! Biorefining will be realized by using two different approaches: the production of new biobased molecular targets or sustainable access to traditional base and commodity chemicals. Awakening of 5-hydroxymethylfurfural (HMF) can be expected with different probabilities, depending on the approach chosen to create a sustainable future.