Impact of Backbone Substitution on Organocatalytic Activity of Sterically Encumbered NHC in Benzoin Condensation

In this study, we provide a theoretical explanation for the experimentally observed decrease in the organocatalytic activity of N-aryl imidazolylidenes methylated at the C4/5-H positions in the benzoin condensation of aromatic aldehydes. A comparative quantum chemical study of energy profiles for the NHC-mediated benzoin condensation of furfural has revealed a high energy barrier to the formation of the IPrMe-based furanic Breslow intermediate that can be attributed to the negative steric interactions between the imidazole backbone methyl groups and N-aryl substituents.

Dye stability of black cherry plum anthocyanins in the interaction with co-pigments and sucrose sweetener

In this research, the co-pigmentation reactions between black cherry plum (Prunus cerasifera Ehrh. cv. Pissardii Nigra) anthocyanins and caffeic, gallic, 4-hydroxybenzoic, malic, and tannic acids with different concentrations (0, 120, 240, 480, and 960 mg L-1) at various temperatures (20, 40, 60, 80, and 100°C) were investigated at pH 3.5. The strongest immediate co-pigmentations resulted at 960 mg L-1, being significantly highest using tannic acid at all temperatures. In addition, the anthocyanin stability and the brown polymeric color formation were investigated in the presence of different concentrations of sucrose sweetener (0, 30, and 60%) and different pHs (2 and 3) in the range of 0-60 h. Also, the amount of furfural was measured in the presence of 0% and 30% sucrose concentrations at pH 2 after 20 h at 90°C by HPLC (high-performance liquid chromatography), and the most polymeric color formation was observed in the concentration of 60% sucrose at pH 2 after 60 h.

Conditions and Mechanism of Formation of the Maillard Reaction Pigment, Furpenthiazinate, in a Model System and in Some Acid Hydrolyzates of Foods and its Biological Properties

Furpenthiazinate is a yellow pigment formed by the Maillard reaction between cysteine and furfural under strongly acidic conditions. Here, we describe the conditions and mechanism of pigment formation in a model system and in an acid hydrolyzate of food and analyze its biological properties. A reaction solution containing 32 mM cysteine and 128 mM furfural or 64 mM cysteine and 256 mM furfural in the presence of 2-6 M hydrochloric acid that was heated to 110 °C for 1-2 h yielded approximately 3 mM furpenthiazinate. Nuclear magnetic resonance analysis of furpenthiazinate prepared using 1-13C or 5-13C d-ribose suggests that it was formed through the condensation of cysteine and two C5 chains derived from pentose with the dehydration and elimination of formic acid. Furpenthiazinate was detected in mieki, a seasoning, and some acid hydrolyzates of food, and it did not show antibacterial or mutagenic activity.

Mechanism of Dihydromyricetin-Induced Reduction of Furfural Derived from the Amadori Compound: Formation of Adducts between Dihydromyricetin and Furfural or Its Precursors

Dihydromyricetin (DMY) was employed to reduce the yield of furfural derived from the Amadori rearrangement product of l-threonine and d-xylose (Thr-ARP) by trapping Thr-ARP, 3-deoxyxyosone (3-DX), and furfural to form adducts. The effect of different concentrations of DMY at different pH values and temperatures on the reduction of furfural production was studied, and the results showed that DMY could significantly reduce furfural production at higher pH (pH 5-7) and lower temperature (110 °C). Through the surface electrostatic potential analysis by Gaussian, a significant enhancement of the C6 nucleophilic ability at higher pH (pH ≥ 5) was observed on DMY with hydrogen-dissociated phenol hydroxyl. The nucleophilic ability of DMY led to its trapping of Thr-ARP, 3-DX, and furfural with the generation of the adducts DMY-Thr-ARP, DMY-3-DX, and DMY-furfural. The formation of the DMY-Thr-ARP adduct slowed the degradation of Thr-ARP, caused the decrease of the 3-DX yield, and thereby inhibited the conversion of 3-DX to furfural. Therefore, DMY-Thr-ARP was purified, and the structure was identified by nuclear magnetic resonance (NMR). The results confirmed that C6 or C8 of DMY and carbonyl carbon in Thr-ARP underwent a nucleophilic addition reaction to form the DMY-Thr-ARP adduct. In combination with the analysis results of Gaussian, most of the DMY-Thr-ARP adducts were calculated to be C6-DMY-Thr-ARP. Furthermore, the formation of DMY-furfural caused furfural consumption. The formation of the adducts also shunted the pathway of both Thr-ARP and 3-DX conversion to furfural, resulting in a decrease in the level of furfural production.

Catalyzed Hydrothermal Pretreatment of Oat Husks for Integrated Production of Furfural and Lignocellulosic Residue

This study presents a novel approach for biorefining oat husks into furfural, leveraging a unique pilot-scale setup. Unlike conventional furfural manufacturing processes, which often result in substantial cellulose degradation and environmental concerns associated with sulfuric acid usage, our method utilizes phosphoric acid as a catalyst to achieve high furfural yield while minimizing cellulose destruction. Drawing on our research conducted in a distinctive pilot-scale environment, we successfully developed and implemented a tailored biorefining process for oat husks. Through meticulous experimentation, we attained a remarkable furfural yield of 11.84% from oven-dried mass, accompanied by a 2.64% yield of acetic acid. Importantly, our approach significantly mitigated cellulose degradation, preserving 88.31% of the cellulose content in oat husks. Existing catalytic (H2SO4) furfural manufacturing processes often lead to substantial cellulose degradation (40-50%) in lignocellulosic leftover during the pretreatment stage. As a result of the research, it was also possible to reduce the destruction of cellulose in the lignocellulose leftover to 11.69% of the output (initial) cellulose of oat husks. This research underscores the feasibility and sustainability of utilizing oat husks as a valuable feedstock for furfural production, highlighting the potential of phosphoric acid as a catalyst in biorefining processes. By showcasing our unique pilot-scale methodology, this study contributes to advancing the field of environmentally friendly biorefining technologies.

Homogeneous Catalyzed Direct Conversion of Furfural to Gamma-Valerolactone

Herein, we report the direct conversion of biomass-derived furfural to γ-valerolactone (GVL) in a one-pot system, using the combination of Ru-MACHO-BH and a Brønsted acid (H3 PO4 ). A GVL yield of 84 % is achieved under mild reaction conditions using 1 mol% of Ru-MACHO-BH and 3.8 M H3 PO4 (aq) at 100 °C for 7 hours.

Nb-Based Catalysts for the Valorization of Furfural into Valuable Product through in One-Pot Reaction

Nb-based catalysts supported on porous silica with different textural properties have been synthesized, characterized, and tested in the one-pot reaction of furfural to obtain valuable chemicals. The catalytic results reveal that the presence of fluoride in the synthesis, which limits the growing of the porous silica, limits diffusional problems of the porous silica, obtaining higher conversion values at shorter reaction times. On the other hand, the incorporation of NbOx species in the porous silica provides Lewis acid sites and a small proportion of Brönsted acid sites, in such a way that the main products are alkyl furfuryl ethers, which can be used as fuel additives.

Understanding the Role of Base Species on Reversed Cu Catalyst in Ring Opening of Furan Compounds to 1, 2-Pentanediol

The hydrogenation of biomass-derived furan compounds provides a sustainable pathway for the production of various valuable chemicals; product selectivity among multiple reaction pathways of furan compound hydrogenation is crucially dependent on catalytic sites; however controlling reaction pathways remains challenging due to the lack of identification and understanding of active sites. In this work we reveal the role of base sites in furfural selective hydrogenation through deliberately designed and synthesized reversed catalysts, basic metal oxides and hydroxide on Cu. It is demonstrated that base species greatly enhanced the selectivity of 1, 2-pentanediol (1, 2-PeD) from furfural, presenting a nearly fourfold increase of 1, 2-PeD: methyl furan ratio over the Cu based reverse catalysts. A combination of infrared spectroscopy and DFT calculations demonstrates the strong interaction between the C-O-C bond in furan ring and the catalyst surface in preferentially parallel adsorption mode in the presence of base species on Cu, thus facilitating the activation of C-O-C bond to produce 1, 2-PeD. This work provides a strategy of designing reversed catalyst to study the effect of promoters and reveals the role of base sites in the hydrogenation of biomass-derived furan compounds to diols.

The Impact of Furfural on the Quality of Meads

Furfural is a naturally occurring compound in bee honey, classified as a fermentation inhibitor. The aim of this study was to ascertain the concentration of furfural in mead worts, prepared at room temperature (unsaturated) and heated to boiling for 10 to 70 min (saturated), with an extract of 25 to 45°Brix. Moreover, the impact of the furfural on the fermentation course of mead wort was assessed. For this purpose, fermentation tests were conducted using mead wort (30°Brix) to which furfural was added at concentrations ranging from 1 to 100 mg/L. HS-SPME-GC-TOF-MS analysis revealed that the furfural concentration in mead worts varied between 2.3 and 5.3 mg/L. In saturated worts, the concentration increased by 2.8 to 4.5 times. Acidification of mead wort prior to boiling led to further increase in furfural concentration. The greatest changes occurred in the least concentrated worts, having the lowest buffer capacity. The addition of furfural to the mead wort did not inhibit fermentation, and an increase in attenuation was observed in the samples containing 2 mg/L of furfural compared to the control. Throughout the fermentation most of the furfural was reduced to furfuryl alcohol.

Production and Downstream Integration of 5-(Chloromethyl)furfural from Lignocellulose

The importance of reducing the strong dependence of the chemical industry on fossil feedstock is no longer a debate. Above-the-ground carbon is abundant, but scalable technologies to supply alternatives to fossil-fuel-derived chemicals and/or materials at the world scale are still not available. Lignocellulosic biomass is the most available carbon source, and a first requirement for its valorization is the complete saccharification of its sugar-bearing components. HCl-based technologies can achieve this at 20 °C and ambient pressure. These principles were disclosed in the 1920s, but the inability to economically separate sugars from acids impeded its commercialization. Avantium Chemicals B.V. developed a modern version of this "Bergius" highly concentrated acid hydrolysis, in which the saccharides in HCl are transformed into furanics without any prior purification, in particular, to 5-(chloromethyl)furfural (CMF). Saccharide conversion to CMF was developed by Mascal in the early 2000s. CMF is extracted in situ using immiscible organic solvents, allowing for an easy product separation. This study not only targets to investigate the viability and optimization of this integrated process but also aims to predict the outcome of the CMF formation reaction by applying design of experiment techniques from the hydrolyzed saccharides varying a broad range of reaction parameters.

4-ATP-modified CNTs@NiO-Fe2O3-Ag SERS filter membrane for rapid in-situ detection of furfural in mineral oil

Evaluating the transformer aging state and detecting multi-aging characteristics in transformer oil with high sensitivity and fast speed has become a key challenge. This study introduces a P-N heterojunction (CNTs@NiO-α-Fe2O3) fabricated through electroless nickel plating and a one-step hydrothermal method. Additionally, silver nanoparticles (AgNPs) with adjustable particle sizes are grown on the surface using a chemical reduction method. To obtain high sensitivity and rapid SERS signal, CNTs@NiO-α-Fe2O3-Ag gel is adsorbed on a disposable needle filter (220 nm) surface, and 4-aminothiophene (4-ATP) is grafted onto the surface of SERS substrate. The minimum detection limit was 0.025 mg/L (EF = 5.22 × 104), and the response time of SERS best signal could be shortened to 3 min. Density functional theory (DFT) calculations reveal that by constructing a P-N heterostructure of NiO-Fe2O3 and assessing the adsorption energies of furfural, acetone, and methanol on the surface of the P-N heterojunction. This SERS strategy has a huge application prospect in the aging diagnosis of oil-paper insulation systems in a transformer.

Biotransamination of Furan-Based Aldehydes with Isopropylamine: Enzyme Screening and pH Influence

Furan-based amines are highly valuable compounds which can be directly obtained via reductive amination from easily accessible furfural, 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). Herein the biocatalytic amination of these carbonyl derivatives is disclosed using amine transaminases (ATAs) and isopropylamine (IPA) as amine donors. Among the different biocatalysts tested, the ones from Chromobacterium violaceum (Cv-TA), Arthrobacter citreus (ArS-TA), and variants from Arthrobacter sp. (ArRmut11-TA) and Vibrio fluvialis (Vf-mut-TA), afforded high levels of product formation (>80 %) at 100-200 mM aldehyde concentration. The transformations were studied in terms of enzyme and IPA loading. The pH influence was found as a key factor and attributed to the imine/aldehyde equilibrium that can arise from the high reactivity of the carbonyl substrates with a nucleophilic amine such as IPA.

Visible-Light-Driven Furfural Oxidation over CuOx /Nb2 O5

Maleic anhydride (MA) is an important polyester monomer that can be produced from oxidizing renewable furfural derived from biomass. However, MA generation from furfural requires harsh reaction conditions, and suffers from low efficiency and solvent corrosion. Herein, we design a Nb2 O5 photocatalyst loaded of highly dispersed CuOx (CuOx /Nb2 O5 ), which selectively catalyzes furfural oxidation to MA and the precursor (5-hydroxy-2(5H)-furanone, HF). Due to CuOx loading and forming a complex of ligand to metal charge transfer (LMCT) between the Nb2 O5 surface and adsorbed furfural, the CuOx /Nb2 O5 absorbs visible light to activate furfural though Nb2 O5 has a large band-gap energy (3.2 eV). Singlet oxygen (1 O2 ) is the key active species for C-C bond cleavage and CO generation. MA and HF is produced with a combined yield of 59 % under optimized conditions. This work provides a mild way to provide renewable maleic anhydride via oxidative C-C bond cleavage.

An Evolved Strain of the Oleaginous Yeast Rhodotorula toruloides, Multi-Tolerant to the Major Inhibitors Present in Lignocellulosic Hydrolysates, Exhibits an Altered Cell Envelope

The presence of toxic compounds in lignocellulosic hydrolysates (LCH) is among the main barriers affecting the efficiency of lignocellulose-based fermentation processes, in particular, to produce biofuels, hindering the production of intracellular lipids by oleaginous yeasts. These microbial oils are promising sustainable alternatives to vegetable oils for biodiesel production. In this study, we explored adaptive laboratory evolution (ALE), under methanol- and high glycerol concentration-induced selective pressures, to improve the robustness of a Rhodotorula toruloides strain, previously selected to produce lipids from sugar beet hydrolysates by completely using the major C (carbon) sources present. An evolved strain, multi-tolerant not only to methanol but to four major inhibitors present in LCH (acetic acid, formic acid, hydroxymethylfurfural, and furfural) was isolated and the mechanisms underlying such multi-tolerance were examined, at the cellular envelope level. Results indicate that the evolved multi-tolerant strain has a cell wall that is less susceptible to zymolyase and a decreased permeability, based on the propidium iodide fluorescent probe, in the absence or presence of those inhibitors. The improved performance of this multi-tolerant strain for lipid production from a synthetic lignocellulosic hydrolysate medium, supplemented with those inhibitors, was confirmed.

Biochar-MgO from Soursop Seeds in the Production of Biofuel Additive Intermediates

The conversion of residual biomass from fruit seeds into biochar can be achieved using MgCl2 as an activating agent and calcining at 700 °C. The resulting MgO-biochars were employed in the aldol condensation reaction between furfural and acetone. This reaction is essential as the first step in the obtention of biofuels derived from biomass. The biochars were characterized through various physicochemical techniques, revealing that the presence of MgO nanoparticles deposited on the carbon surface modifies the structural and acidic-basic properties of the carbonaceous materials with a graphitic structure. The biochar with a surface content of MgO of 0.34 % w/w enables the achievement of 100 % of selectivity towards 4-(2-furanyl)-3-buten-2-one (I) with quantitative conversions under optimized conditions. This property highlights the potential of using this type of biochar, commonly used for CO2 capture, as a versatile acidic-basic catalyst, thereby introducing a novel approach to sustainable chemistry.

Current Status and Challenges for Metal-Organic-Framework-Assisted Conversion of Biomass into Value-Added Chemicals

Owing to the abundance of availability, low cost, and environmental-friendliness, biomass waste could serve as a prospective renewable source for value-added chemicals. Nevertheless, biomass conversion into chemicals is quite challenging due to the heterogeneous nature of biomass waste. Biomass-derived chemicals are appealing sustainable solutions that can reduce the dependency on existing petroleum-based production. Metal-organic frameworks (MOFs)-based catalysts and their composite materials have attracted considerable amounts of interest in biomass conversion applications recently because of their interesting physical and chemical characteristics. Due to their tunability, the catalytic activity and selectivity of MOF-based catalyst/composite materials can be tailored by functionalizing them with a variety of functional groups to enhance biomass conversion efficiency. This review focuses on the catalytic transformation of lignocellulosic biomass into value-added chemicals by employing MOF-based catalyst/composite materials. The main focus is given to the production of the platform chemicals HMF and Furfural from the corresponding (hemi)cellulosic biomass, due to their versatility as intermediates for the production of various biobased chemicals and fuels. The effects of different experimental parameters on the conversion of biomass by MOF-based catalysts are also included. Finally, current challenges and perspectives of biomass conversion into chemicals by MOF-based catalysts are highlighted.

Influence of Hydrothermal Treatment of Brewer's Spent Grain on the Concentration and Molecular Weight Distribution of 1,3-1,4-β-D-Glucan and Arabinoxylan

Brewer's spent grain (BSG) is the most abundant residual in the brewing process. Non-starch polysaccharides such as 1,3-1,4-β-D-glucan (β-glucan) and arabinoxylan (AX) with proven beneficial effects on human health remain in this by-product in high amounts. Incorporating the valuable dietary fiber into the food industry could contribute to a healthy diet. However, a major challenge is extracting these dietary fibers (i.e., β-glucan and AX) from the solid residue. In this study, hydrothermal treatment (HT) was applied to dissolve the remaining water-insoluble carbohydrates from BSG with the aim to extract high amounts of β-glucan and AX. Particular focus was placed on the molecular weight (MW) range above 50 kDa and 20 kDa, respectively, as these are considered to have health-promoting effects. Different treatment temperatures, reaction times, and internal reactor pressures were tested to determine the best process settings to achieve high yields of β-glucan and AX and to examine the influence on their molecular weight distribution (MWD). Overall, 85.1% β-glucan and 77.3% AX were extracted corresponding to 6.3 g per kg BSG at 160 °C and 178.3 g kg-1 at 170 °C, respectively. However, less than 20% of both fiber substances were in the desirable MW range above 50 kDa and 20 kDa, respectively. When lower temperatures of 140 and 150 °C were applied, yields of only 3.0 g kg-1 β-glucan and 128.8 g kg-1 AX were obtained, whereby the proportion of desirable fiber fractions increased up to 45%. Further investigations focused on the heat-induced degradation of monosaccharides and the formation of undesirable by-products (i.e., HMF and furfural) that might pose a health risk.

Supported Gold Catalysts for Base-Free Furfural Oxidation: The State of the Art and Machine-Learning-Enabled Optimization

Supported gold nanoparticles have proven to be highly effective catalysts for the base-free oxidation of furfural, a compound derived from biomass. Their small size enables a high surface-area-to-volume ratio, providing abundant active sites for the reaction to take place. These gold nanoparticles serve as catalysts by providing surfaces for furfural molecules to adsorb onto and facilitating electron transfer between the substrate and the oxidizing agent. The role of the support in this reaction has been widely studied, and gold-support interactions have been found to be beneficial. However, the exact mechanism of furfural oxidation under base-free conditions remains an active area of research and is not yet fully understood. In this review, we delve into the essential factors that influence the selectivity of furfural oxidation. We present an optimization process that highlights the significant role of machine learning in identifying the best catalyst for this reaction. The principal objective of this study is to provide a comprehensive review of research conducted over the past five years concerning the catalytic oxidation of furfural under base-free conditions. By conducting tree decision making on experimental data from recent articles, a total of 93 gold-based catalysts are compared. The relative variable importance chart analysis reveals that the support preparation method and the pH of the solution are the most crucial factors determining the yield of furoic acid in this oxidation process.

Colorants and Antioxidants Deriving from Methylglyoxal and Heterocyclic Maillard Reaction Intermediates

The Maillard reaction is well known for producing antioxidant compounds alongside colored substances. Low-molecular-weight antioxidant intermediates such as maltol (MAL) or norfuraneol (NF) are well described, but it is still unclear which of these Maillard intermediates are the precursors of antioxidant and colored melanoidins-the so-called late stage Maillard reaction products. This study aimed to provide novel insights into the correlation between browning potential and antioxidant properties of reaction products formed during the heat treatment of prominent Maillard reaction intermediates. It was achieved by the incubation of binary reaction systems composed of methylglyoxal (MGO) or NF in combination with furfural (FF), MAL, and pyrrole-2-carbaldehyde (PA) at pH 5 and 130 °C for up to 120 min. Overall, it could be shown that the formation of colored products in the binary NF reaction systems was more efficient compared to those of MGO. This was reflected in an increased browning intensity of up to 400% and a lower conversion rate of NF compared to MGO. The colorants formed by NF and FF or PA (~0.34 kDa and 10-100 kDa) were also found to exhibit higher molecular weights compared to the analogue products formed in the MGO incubations (<0.34 kDa and 10-100 kDa). The incorporation of NF into these heterogenous products with FF and PA resulted in the preservation of the initial antioxidant properties of NF (p < 0.05), whereas no antioxidant products were formed after the incubation of MGO.

Constructing a Pd-Co Interface to Tailor a d-Band Center for Highly Efficient Hydroconversion of Furfural over Cobalt Oxide-Supported Pd Catalysts

Cobalt is an alternative catalyst for furfural hydrogenation but suffers from the strong binding of H and furan ring on the surface, resulting in low catalytic activity and chemoselectivity. Herein, by constructing a Pd-Co interface in cobalt oxide-supported Pd catalysts to tailor the d-band center of Co, the concerted effort of Pd and Co boosts the catalytic performance for the hydroconversion of furfural to cyclopentanone and cyclopentanol. The increased dispersion of Pd on acid etching Co3O4 promotes the reduction of Co3+ to Co0 by enhancing hydrogen spillover, favoring the creation of the Pd-Co interface. Both experimental and theoretical calculations demonstrate that the electron transfer from Pd to Co at the interface results in the downshift of the d-band center of Co atoms, accompanied by the destabilization of H and furan ring adsorption on the Co surface, respectively. The former improves the furfural hydrogenation with TOF on Co elevating from 0.20 to 0.62 s-1, and the latter facilitates the desorption of formed furfuryl alcohol from the Co surface for subsequently hydrogenative rearrangement of the furan ring to cyclopentanone on acid sites. The resultant Pd/Co3O4-6 catalyst delivers superior activity with a 99% furfural conversion and 85% overall selectivity toward cyclopentanone/cyclopentanol. We anticipate that such a concept of tailoring the d-band center of Co via interface engineering provides novel insight and feasible approach for the design of highly efficient catalysts for furfural hydroconversion and beyond.

Whole-Genome Sequence and Fermentation Characteristics of Enterobacter hormaechei UW0SKVC1: A Promising Candidate for Detoxification of Lignocellulosic Biomass Hydrolysates and Production of Value-Added Chemicals

Enterobacter hormaechei is part of the Enterobacter cloacae complex (ECC), which is widespread in nature. It is a facultative Gram-negative bacterium of medical and industrial importance. We assessed the metabolic and genetic repertoires of a new Enterobacter isolate. Here, we report the whole-genome sequence of a furfural- and 5-hydroxymethyl furfural (HMF)-tolerant strain of E. hormaechei (UW0SKVC1), which uses glucose, glycerol, xylose, lactose and arabinose as sole carbon sources. This strain exhibits high tolerance to furfural (IC50 = 34.2 mM; ~3.3 g/L) relative to Escherichia coli DH5α (IC50 = 26.0 mM; ~2.5 g/L). Furfural and HMF are predominantly converted to their less-toxic alcohols. E. hormaechei UW0SKVC1 produces 2,3-butanediol, acetoin, and acetol, among other compounds of industrial importance. E. hormaechei UW0SKVC1 produces as high as ~42 g/L 2,3-butanediol on 60 g/L glucose or lactose. The assembled genome consists of a 4,833,490-bp chromosome, with a GC content of 55.35%. Annotation of the assembled genome revealed 4586 coding sequences and 4516 protein-coding genes (average length 937-bp) involved in central metabolism, energy generation, biodegradation of xenobiotic compounds, production of assorted organic compounds, and drug resistance. E. hormaechei UW0SKVC1 shows considerable promise as a biocatalyst and a genetic repository of genes whose protein products may be harnessed for the efficient bioconversion of lignocellulosic biomass, abundant glycerol and lactose-replete whey permeate to value-added chemicals.

Microwave-Assisted One Pot Cascade Conversion of Furfural to γ-Valerolactone over Sc(OTf)3

γ-Valerolactone (GVL) is considered as a star biochemical which can be used as a green solvent, fuel additive and versatile organic intermediate. In this study, metal triflate (M(OTf)n ) was utilized as the catalyst for one-pot transformation of furfural (FF) to GVL in alcohol media under microwave irradiation. Alcohol plays multiple functions including solvent, hydrogen donor and alcoholysis reagent in this cascade reaction process. And process efficiency of GVL production from FF upgrading is strongly related to the effective charge density of selected catalyst and the reduction potential of selected alcohol. Complex (OTf)n -M-O(H)R, presenting both Brønsted acid and Lewis acid, is the real catalytic active species in this cascade reaction process. Among various catalysts, Sc(OTf)3 exhibited the best catalytic activity for GVL production. Various reaction parameters including the Sc(OTf)3 amount, reaction temperature and time were optimized by the response surface methodology with the central composite design (RSM-CCD). Up to 81.2 % GVL yield and 100 % FF conversion were achieved at 143.9 °C after 8.1 h in the presence of 0.16 mmol catalyst. This catalyst exhibits high reusability and can be regenerated by oxidative degradation of humins. In addition, a plausible cascade reaction network was proposed based on the distribution of product.

Nonlethal Furfural Exposure Causes Genomic Alterations and Adaptability Evolution in Saccharomyces cerevisiae

Furfural is a major inhibitor found in lignocellulosic hydrolysate, a promising feedstock for the biofermentation industry. In this study, we aimed to investigate the potential impact of this furan-derived chemical on yeast genome integrity and phenotypic evolution by using genetic screening systems and high-throughput analyses. Our results showed that the rates of aneuploidy, chromosomal rearrangements (including large deletions and duplications), and loss of heterozygosity (LOH) increased by 50-fold, 23-fold, and 4-fold, respectively, when yeast cells were cultured in medium containing a nonlethal dose of furfural (0.6 g/L). We observed significantly different ratios of genetic events between untreated and furfural-exposed cells, indicating that furfural exposure induced a unique pattern of genomic instability. Furfural exposure also increased the proportion of CG-to-TA and CG-to-AT base substitutions among point mutations, which was correlated with DNA oxidative damage. Interestingly, although monosomy of chromosomes often results in the slower growth of yeast under spontaneous conditions, we found that monosomic chromosome IX contributed to the enhanced furfural tolerance. Additionally, terminal LOH events on the right arm of chromosome IV, which led to homozygosity of the SSD1 allele, were associated with furfural resistance. This study sheds light on the mechanisms underlying the influence of furfural on yeast genome integrity and adaptability evolution. IMPORTANCE Industrial microorganisms are often exposed to multiple environmental stressors and inhibitors during their application. This study demonstrates that nonlethal concentrations of furfural in the culture medium can significantly induce genome instability in the yeast Saccharomyces cerevisiae. Notably, furfural-exposed yeast cells displayed frequent chromosome aberrations, indicating the potent teratogenicity of this inhibitor. We identified specific genomic alterations, including monosomic chromosome IX and loss of heterozygosity of the right arm of chromosome IV, that confer furfural tolerance to a diploid S. cerevisiae strain. These findings enhance our understanding of how microorganisms evolve and adapt to stressful environments and offer insights for developing strategies to improve their performance in industrial applications.

Selected Maillard Reaction Products and Their Yeast Metabolites in Commercial Wines

During beer and wine production, Maillard reaction products (MRPs) are formed, which have a particular influence on the taste and aroma of the fermented beverages. Compared to beer, less is known about individual Maillard compounds and especially corresponding yeast metabolites in wine. In this study, 36 selected wines (Amarone, Ripasso, red, and white wines) were analyzed by HPLC-UV and GC-MS concerning the amounts of 3-deoxyglucosone (3-DG), 3-deoxygalactosone (3-DGal), methylglyoxal (MGO), glyoxal (GO), 5-hydroxymethylfurfural (HMF), and furfural (FF). 3-DG was found to be the dominant compound with values from 3.3 to 35.1 mg/L. The contents of 3-DGal, MGO, GO, HMF, and FF were in a single digit range. In addition to MRPs, the yeast metabolites originating from 3-DG, namely, 3-deoxyfructose and 3-deoxy-2-ketogluconic acid, 2,5-bis(hydroxymethyl)furan and 5-formyl-2-furancarboxylic acid, both formed from HMF, and the FF metabolites furfuryl alcohol and furan-2-carboxylic acid were detected and quantitated in wines for the first time. The amounts were between 0.1 and 53.5 mg/L with especially high contents of the oxidation products. Differences between red and white wines indicate that enological parameters like grape variety, production method, and aging may have an influence on the MRP contents in wines.

Phenol-Furfural Resin/Graphite/Ag-Based Electrically Conductive Adhesive Composites from Waste Bagasse with Enhanced Thermo-Electric Properties

This study describes the preparation and evaluation of phenol-furfural resin (PFR) from bagasse and its nanocomposites for electrically conductive adhesive (ECA) application. PFR was prepared with furfural extracted from bagasse using a modified acid digestion method. Three different formulations of PFR nanocomposites with conductive nanoparticles, i.e., PFR-silver, PFR-graphite, and PFR-silver + graphite, were prepared using 20, 40, and 60 w/w% of fillers via the impregnation method. The resultant products were characterized using FT-IR, SEM, EDS, and XRD spectroscopy. Electrical conductivity was measured using a four-probe technique, while band gap was calculated via Tauc plots. The results exhibited a significant rise in electrical conductivity of insulating virgin PFR from 2.6 × 10-4 Scm-1 to 8.2 × 10-1 Scm-1 with a 40 and 20 w/w% blend of Ag and graphite in PFR. This synergism was exhibited because graphite and Ag NPs supply excellent junctions for building networks. Both tend to coalesce due to van der Waals forces and high surface energies. Therefore, conductive pathway numbers can be increased, and the contact area can be effectively enlarged. This ternary composite exhibited the lowest bandgap energy value, i.e., 3.1 eV. Thermogravimetric temperature values T0 and Tdeg were increased up to 120 °C and 484 °C, respectively, showing a significant increase in thermal stability. Therefore, the resultant nanocomposite material has good potential to be employed as an ECA in the electronic industry.

Transfer Hydrogenation of Furfural to Furfuryl Alcohol Under Microwave Irradiation Using Mixed Oxides

The reaction to obtain furan alcohols is one of the most important in the upgrading of furan derivates. An attractive route is the transfer hydrogenation of furfural using acidic-basic catalysts. In this work, mixed oxides derived from ternary hydrotalcites were employed to obtain furfuryl alcohol from furfural assisted by microwave irradiation. These materials were characterized via X-ray diffraction (XRD), N2 adsorption-desorption isotherms, Fourier-transform infrared (FTIR) and the CO2 temperature-programmed desorption (CO2 -TPD) analyses. The lamellar structure of hydrotalcite-type materials collapses during the calcination process, resulting in the loss of carbonate anions and hydroxyl groups, present in the interlayer space. This leads to the formation of mixed oxides that exhibit larger surface areas. Furthermore, these changes alter the basic nature of these materials, giving rise to the formation of strong basic sites. The reaction was studied using containing Co2+ and Ni2+ in their structure and was then optimized using distinct primary and secondary alcohols as hydrogen donor sources, as well as distinct temperatures and initial concentrations of furfural. The yields to furfuryl alcohol are strongly dependent on the type of Me2+ in layered oxides mainly due to higher basicity and to the donor employed in the reaction. The mixed oxide containing Co2+ showed complete conversion of furfural and higher yields to furfuryl alcohol (>95 %) at short times of reaction (<1 h).

A Comprehensive Review on Metal Catalysts for the Production of Cyclopentanone Derivatives from Furfural and HMF

The catalytic transformation of biomass-based furan compounds (furfural and HMF) for the synthesis of organic chemicals is one of the important ways to utilize renewable biomass resources. Among the numerous high-value products, cyclopentanone derivatives are a kind of valuable compound obtained by the hydrogenation rearrangement of furfural and HMF in the aqueous phase of metal-hydrogen catalysis. Following the vast application of cyclopentanone derivatives, this reaction has attracted wide attention since its discovery, and a large number of catalytic systems have been reported to be effective in this transformation. Among them, the design and synthesis of metal catalysts are at the core of the reaction. This review briefly introduces the application of cyclopentanone derivatives, the transformation mechanism, and the pathway of biomass-based furan compounds for the synthesis of cyclopentanone derivatives. The important progress of metal catalysts in the reaction since the first report in 2012 up to now is emphasized, the characteristics and catalytic performance of different metal catalysts are introduced, and the critical role of metal catalysts in the reaction is discussed. Finally, the future development of this transformation process was prospected.

Contribution of YPRO15C Overexpression to the Resistance of Saccharomyces cerevisiae BY4742 Strain to Furfural Inhibitor

Lignocellulosic biomass is still considered a feasible source of bioethanol production. Saccharomyces cerevisiae can adapt to detoxify lignocellulose-derived inhibitors, including furfural. Tolerance of strain performance has been measured by the extent of the lag phase for cell proliferation following the furfural inhibitor challenge. The purpose of this work was to obtain a tolerant yeast strain against furfural through overexpression of YPR015C using the in vivo homologous recombination method. The physiological observation of the overexpressing yeast strain showed that it was more resistant to furfural than its parental strain. Fluorescence microscopy revealed improved enzyme reductase activity and accumulation of oxygen reactive species due to the harmful effects of furfural inhibitor in contrast to its parental strain. Comparative transcriptomic analysis revealed 79 genes potentially involved in amino acid biosynthesis, oxidative stress, cell wall response, heat shock protein, and mitochondrial-associated protein for the YPR015C overexpressing strain associated with stress responses to furfural at the late stage of lag phase growth. Both up- and down-regulated genes involved in diversified functional categories were accountable for tolerance in yeast to survive and adapt to the furfural stress in a time course study during the lag phase growth. This study enlarges our perceptions comprehensively about the physiological and molecular mechanisms implicated in the YPR015C overexpressing strain's tolerance under furfural stress. Construction illustration of the recombinant plasmid. a) pUG6-TEF1p-YPR015C, b) integration diagram of the recombinant plasmid pUG6-TEF1p-YPR into the chromosomal DNA of Saccharomyces cerevisiae.

Assessment of the TRX2p-yEGFP Biosensor to Monitor the Redox Response of an Industrial Xylose-Fermenting Saccharomyces cerevisiae Strain during Propagation and Fermentation

The commercial production of bioethanol from lignocellulosic biomass such as wheat straw requires utilizing a microorganism that can withstand all the stressors encountered in the process while fermenting all the sugars in the biomass. Therefore, it is essential to develop tools for monitoring and controlling the cellular fitness during both cell propagation and sugar fermentation to ethanol. In the present study, on-line flow cytometry was adopted to assess the response of the biosensor TRX2p-yEGFP for redox imbalance in an industrial xylose-fermenting strain of Saccharomyces cerevisiae during cell propagation and the following fermentation of wheat-straw hydrolysate. Rapid and transient induction of the sensor was recorded upon exposure to furfural and wheat straw hydrolysate containing up to 3.8 g/L furfural. During the fermentation step, the induction rate of the sensor was also found to correlate to the initial ethanol production rate, highlighting the relevance of redox monitoring and the potential of the presented tool to assess the ethanol production rate in hydrolysates. Three different propagation strategies were also compared, and it was confirmed that pre-exposure to hydrolysate during propagation remains the most efficient method for high ethanol productivity in the following wheat-straw hydrolysate fermentations.

Rovibrational Spectroscopy of Trans and Cis Conformers of 2-Furfural from High-Resolution Fourier Transform and QCL Infrared Measurements

The ortho-isomer 2-furfural (2-FF), which is a primary atmospheric pollutant produced from biomass combustion, is also involved in oxidation processes leading to the formation of secondary organic aerosols. Its contribution to radiative forcing remains poorly understood. Thus, monitoring 2-FF directly in the atmosphere or in atmospheric simulation chambers to characterize its reactivity is merited. The present study reports an extensive jet-cooled rovibrational study of trans and cis conformers of 2-FF in the mid-IR region using two complementary setups: a continuous supersonic jet coupled to a high-resolution Fourier transform spectrometer on the IR beamline of the SOLEIL synchrotron (JET-AILES), and a pulsed jet coupled to a mid-IR tunable quantum cascade laser spectrometer (SPIRALES). Firstly, jet-cooled spectra recorded at rotational temperatures ranging between 20 and 50 K were exploited to derive reliable excited-state molecular parameters of trans- and cis-2-FF vibrational bands in the fingerprint region. The parameters were obtained from global fits of 11,376 and 3355 lines distributed over eight and three vibrational states (including the ground state), respectively, with a root mean square of 12 MHz. In a second step, the middle resolution spectrum of 2-FF recorded at 298.15 K and available in the HITRAN database was reconstructed by extrapolating the data derived from our low-temperature high-resolution analyses to determine the cross sections of each vibrational band of both 2-FF conformers in the 700-1800 cm^-1 region. Finally, we clearly demonstrated that the contribution of hot bands observed in the room temperature 2-FF spectrum, estimated between 40 and 63% of the fundamental band, must be imperatively introduced in our simulation to correctly reproduce the HITRAN vibrational cross sections of 2-FF with a deviation smaller than 10%.

C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

The C3-functionalization of furfural using homogeneous ruthenium catalysts requires the preinstallation of an ortho-directing imine group, as well as high temperatures, which did not allow scaling up, at least under batch conditions. In order to design a safer process, we set out to develop a continuous flow process specifically for the C3-alkylation of furfural (Murai reaction). The transposition of a batch process to a continuous flow process is often costly in terms of time and reagents. Therefore, we chose to proceed in two steps: the reaction conditions were first optimized using a laboratory-built pulsed-flow system to save reagents. The optimized conditions in this pulsed-flow mode were then successfully transferred to a continuous flow reactor. In addition, the versatility of this continuous flow device allowed both steps of the reaction to be carried out, namely the formation of the imine directing group and the C3-functionalization with some vinylsilanes and norbonene.

Selective aqueous-phase hydrogenation of furfural to cyclopentanol over Ni-based CNT catalysts

AbstractCyclopentanol (CPL) was an eco-friendly solvent as well as important platform chemical which could be generated from biomass-derived furfural (FFA). In this paper, A series of Ni, Cu, Mo, Co bimetallic catalysts with different metals loadings supported on Carbon nanotubes (CNT) were synthesized by an impregnation method for aqueous-phase hydrogenation of FFA to obtain CPL. Various effects of reaction parameters such as, reaction solvent, reaction temperature, reaction time, and different loading amount of Ni over bimetallic Ni-based CNT catalysts were fully investigated. Among the catalysts studied, (15 + 5) wt% NiCu/CNT catalysts showed high conversion of FFA and 88% selectivity towards CPL in water and 96% selectivity towards acetal in methanol at mild condition of 160℃, 2 MPa hydrogen and 4 h reaction time. NiCu bimetallic synergistic effect was interpreted through H₂-TPR and NH₃-TPD measurement and a possible pathway was proposed. The features of the CNT supported catalysts were investigated via XRD, XPS, TEM, H₂-TPR and NH₃-TPD. The Ni and bimetallic NiCu catalysts synthesized in this work were inexpensive and simple, which made them a promising candidate for the conversion of biomass-derived FFA to CPL.

High-Loaded Copper-Containing Sol-Gel Catalysts for Furfural Hydroconversion

In this study, the high-loaded copper-containing catalysts modified with Fe and Al were successfully applied for the hydroconversion of furfural to furfuryl alcohol (FA) or 2-methylfuran (2-MF) in a batch reactor. The synthesized catalysts were studied using a set of characterization techniques to find the correlation between their activity and physicochemical properties. Fine Cu-containing particles distributed in an amorphous SiO₂ matrix, which has a high surface area, provide the conversion of furfural to FA or 2-MF under exposure to high pressure of hydrogen. The modification of the mono-copper catalyst with Fe and Al increases its activity and selectivity in the target process. The reaction temperature strongly affects the selectivity of the formed products. At a H₂ pressure of 5.0 MPa, the highest selectivity toward FA (98%) and 2-MF (76%) was achieved in the case of 35Cu13Fe1Al-SiO₂ at the temperature of 100 °C and 250 °C, respectively.

Facile Hydrogenation of Furfural by MOF-Derived Graphitic Carbon Wrapped FeCo Bimetallic Catalysts

A catalytic system for selective transformation of furfural into biofuel is highly desirable. However, selective hydrogenation of the C═O group over the furan ring of furfural to produce ether in one step is challenging. Here, we report the preparation of a series of magnetically recoverable FeCo@GC nano-alloys (37-40 nm). Fe3O4 (3-5 nm) and MOF-71 (Co), used as the Co and C source, were mixed together in a range of Fe/Co ratios, and then encapsulated in a graphitic carbon (GC) shell to prepare such alloys. STEM-HAADF shows the darker core made of FeCo and the shell of graphitic carbon. Furfural is hydrogenated to produce >99% isopropyl furfuryl ether in isopropanol with >99% conversion at 170 ºC under 40 bars of H2, whereas n-chain alcohol, such as ethanol, produces corresponding ethyl levulinate in 93%. The synergistic effect due to the charge transfer from Fe to Co leads to higher reactivity of FeCo@GC. The catalyst, which can be separated from the reaction medium using a simple magnet without significant damage to the surface or composition, retained its reactivity and selectivity for up to four consecutive cycles.

Catalytic conversion of diformylxylose to furfural in biphasic solvent systems

Biobased furfural is a sustainable alternative to petrochemical intermediates for bulk chemicals and fuel production. However, existing methods for the conversion of xylose or lignocelluloses in mono-/bi-phasic systems to furfural involve non-selective sugar isolation or lignin condensation, limiting the valorisation of lignocelluloses. Herein, we used diformylxylose (DFX), a xylose derivative that is formed during the lignocellulosic fractionation process with formaldehyde protection, as a substitute for xylose to produce furfural in biphasic systems. Under kinetically optimized conditions, over 76 mol% of DFX could be converted to furfural in water-methyl isobutyl ketone system at a high reaction temperature with a short reaction time. Finally, isolation of xylan in eucalyptus wood as DFX with formaldehyde protection followed by converting DFX in a biphasic system gave a final furfural yield of 52 mol% (on the basis of xylan in wood), which was more than two times of that without formaldehyde. Combined with the value-added utilization of formaldehyde-protected lignin, this study would enable the full and efficient utilization of lignocellulosic biomass components and further improve the economics of the formaldehyde protection fractionation process.

The Role of Copper in the Hydrogenation of Furfural and Levulinic Acid

Currently, there is a great interest in the development of sustainable and green technologies for production of biofuels and chemicals. In this sense, much attention is being paid to lignocellulosic biomass as feedstock, as alternative to fossil-based resources, inasmuch as its fractions can be transformed into value-added chemicals. Two important platform molecules derived from lignocellulosic sugars are furfural and levulinic acid, which can be transformed into a large spectrum of chemicals, by hydrogenation, oxidation, or condensation, with applications as solvents, agrochemicals, fragrances, pharmaceuticals, among others. However, in many cases, noble metal-based catalysts, scarce and expensive, are used. Therefore, an important effort is performed to search the most abundant, readily available, and cheap transition-metal-based catalysts. Among these, copper-based catalysts have been proposed, and the present review deals with the hydrogenation of furfural and levulinic acid, with Cu-based catalysts, into several relevant chemicals: furfuryl alcohol, 2-methylfuran, and cyclopentanone from FUR, and γ-valerolactone and 2-methyltetrahydrofuran from LA. Special emphasis has been placed on catalytic processes used (gas- and liquid-phase, catalytic transfer hydrogenation), under heterogeneous catalysis. Moreover, the effect of addition of other metal to Cu-based catalysts has been considered, as well as the issue related to catalyst stability in reusing studies.

Chitin-Derived Nanocatalysts for Reductive Amination Reactions

Chitin, the second most abundant biopolymer in the planet after cellulose, represents a renewable carbon and nitrogen source. A thrilling opportunity for the valorization of chitin is focused on the preparation of biomass-derived N-doped carbonaceous materials. In this contribution, chitin-derived N-doped carbons were successfully prepared and functionalized with palladium metal nanoparticles. The physicochemical properties of these nanocomposites were investigated following a multi-technique strategy and their catalytic activity in reductive amination reactions was explored. In particular, a biomass-derived platform molecule, namely furfural, was upgraded to valuable bi-cyclic compounds under continuous flow conditions.

Occurrence of Furfural and Its Derivatives in Coffee Products in China and Estimation of Dietary Intake

This is the first report on the content of furfural and its derivatives in coffee products in China. The concentrations of furfural and its derivatives in 449 sampled, commercially available coffee products in China were analyzed through a GC-MS technique, and the associated health risks were estimated. As a result, 5-hydroxymethyl furfural (5-HMF) was identified as the predominant derivative compound, with the highest concentration of 6035.0 mg/kg and detection frequency of 98.7%. The mean dietary exposures of 5-HMF, 5-MF(5-methylfurfural), and 2-F(2-furfural) in coffee products among Chinese consumers were 55.65, 3.00, and 3.23 μg/kg bw/day, respectively. The ranges of mean dietary intake of furfural and its derivatives based on age groups were all lower than the acceptable daily intake (ADI) and the toxicological concern threshold (TTC). Risk evaluation results indicate that coffee product intake did not pose potential risks to consumers. Notably, the analysis revealed that children aged 3-6 years had the highest mean exposure due to their low body weight.

Transformation of Corn Stover into Furan Aldehydes by One-Pot Reaction with Acidic Lithium Bromide Solution

Currently, the production of furan aldehydes from raw biomass suffers from low furfural yield and high energy consumption. In this study, a recyclable and practical method was explored for the preparation of furfural from corn stover by the one-pot reaction by acidic lithium bromide solution (ALBS) without pretreatment and enzymolysis. In the ALBS reaction, the furan aldehydes were generated by the degradation of lignocellulose; however, the products were unstable and were further dehydrated to form humins. So, dehydration reaction was inhibited in this study, and the high yield of furan aldehydes was obtained, in which 2.94 g/L of furfural and 2.78 g/L of 5-hydroxymethyl furfural (5-HMF) were generated with high solid loading (10 wt%), the presence of commercial catalyst ZSM-5 and co-solvent tetrahydrofuran (THF) at 140 °C for 200 min. Via this method, almost 100% of hemicellulose was transformed to furfural, and 40.71% of cellulose was transformed to 5-HMF, which was based on the theoretical yield of HMF (8.35 g) from glucose (29.30 g) produced from cellulose. After the reaction, the catalyst ZSM-5 was the main component in the solid residue and kept a suitable performance. THF azeotrope was easily separated from the slurry by evaporation. During the removal of THF, lignin was precipitated from the liquid phase and showed lower molecular weight and abundant active groups, which was a potential feedstock for producing valuable aromatics and polymers. Thus, in a one-pot reaction, the ideal yield of furan aldehydes from raw biomass was obtained on a lab scale, and the catalyst, THF, and LiBr were easily recycled, which provided an option to realize the economical production of sustainable furan aldehydes from raw biomass.

Relationship of Thermal Treatment and Antioxidant Capacity in Cooked Foods

Most of the foods we eat undergo a cooking process before they are eaten. During such a process, the non-enzymatic browning occurs, which generates compounds such as furosine, 5-hydroxymethylfurfural (HMF) and furfural. These are considered markers of cookedness and can therefore be used as quality indicators. In this work, we study the production of these compounds in different foods (both of plant and animal origin) that are cooked with different techniques. Additionally, we investigate correlations between the production of these markers of cookedness and the antioxidant capacity produced after in vitro digestion and fermentation. We observe that, in general, cereals and vegetables are more thermally damaged. Toasting and frying produce the highest concentrations of Maillard compounds whereas boiling the lowest. Furosine content shows a significant positive correlation with in vitro digestion data in fried foods, and with fermentation in roasted foods. Furfural content shows a significant positive correlation with in vitro digestion results in roasted foods, specifically in the Folin-Ciocalteu method.

Microbial detoxification of lignocellulosic biomass hydrolysates: Biochemical and molecular aspects, challenges, exploits and future perspectives

Valorization of lignocellulosic biomass (LB) has the potential to secure sustainable energy production without impacting food insecurity, whist relieving over reliance on finite fossil fuels. Agro-derived lignocellulosic residues such as wheat straw, switchgrass, rice bran, and miscanthus have gained relevance as feedstocks for the production of biofuels and chemicals. However, the microorganisms employed in fermentative conversion of carbohydrates to fuels and chemicals are unable to efficiently utilize the sugars derived from LB due to co-production of lignocellulose-derived microbial inhibitory compounds (LDMICs) during LB pretreatment. LDMICs impact microbial growth by inhibition of specific enzymes, cause DNA and cell membrane damage, and elicit cellular redox imbalance. Over the past decade, success has been achieved with the removal of LDMICs prior to fermentation. However, LDMICs removal by chemical processes is often accompanied by sugar losses, which negatively impacts the overall production cost. Hence, in situ removal of LDMICs by fermentative organisms during the fermentation process has garnered considerable attention as the "go-to" approach for economical LDMICs detoxification and bio-chemicals production. In situ removal of LDMICs has been pursued by either engineering more robust biocatalysts or isolating novel microbial strains with the inherent capacity to mineralize or detoxify LDMICs to less toxic compounds. While some success has been made along this line, efficient detoxification and robust production of target bio-chemicals in lignocellulosic hydrolysates (LHs) under largely anaerobic fermentative conditions remains a lingering challenge. Consequently, LB remains an underutilized substrate for bio-chemicals production. In this review, the impact of microbial LH detoxification on overall target molecule production is discussed. Further, the biochemical pathways and mechanisms employed for in situ microbial detoxification of furanic LDMICs [e.g., furfural and 5-hydroxymethylfurfural (HMF)] and phenolic LDMICs (e.g., syringaldehyde, p-coumaric acid, 4-hydroxybenzaldehyde, vanillin, and ferulic acid) are discussed. More importantly, metabolic engineering strategies for the development of LDMIC-tolerant and bio-chemicals overproducing strains and processes are highlighted.

Ultrahigh Metal Content Carbon-Based Catalyst for Efficient Hydrogenation of Furfural: The Regulatory Effect of Glycerol

The development of high-content non-noble metal nanocatalysts is important for multiphase catalysis applications. However, it is a challenge to solve the agglomeration in the preparation of high-content metal catalysts. In this paper, a carbon-based catalyst (Co@CN-G-600) with 71.28 wt % cobalt metal content was prepared using a new strategy of gas-phase carbon coating assisted by glycerol. The core of this strategy is to maintain the spacing of metallic cobalt by continuous replenishment of dissociated ligands during pyrolysis over gas-phase glycerol. This approach is also applicable to other non-noble metals. When Co@CN-G-600 was further used as a catalyst for the selective hydrogenation of furfural (FF) to prepare furfuryl alcohol (FOL), the yield of FOL was >99.9% under mild conditions of 80 °C, compared to only 8.23% catalytic yield at up to 130 °C for Co@CN-600 without glycerol. The excellent catalytic performance mainly lies in the fact that the introduction of glycerol modulates the size effect, electronic effect, and acidic site intensity of the high-content Co catalyst, which promotes the activation of FF and hydrogen. Meanwhile, the optimized specific surface area and pore structure by glycerol improve the accessibility of high-density active sites and promote more efficient mass transfer. In addition, the introduction of glycerol produced a graphitic carbon layer encapsulation structure relative to Co@CN-600, which substantially improved the cycling stability of the catalyst. This study resolves the paradox of high content and high dispersion of non-noble metal catalysts in the synthesis process and provides a general pathway and example for the preparation of stable high-content metal catalysts.

Targeting Valuable Chemical Commodities: Hydrazine-mediated Diels-Alder Aromatization of Biobased Furfurals

A hydrazine-mediated approach towards renewable aromatics production via Diels-Alder aromatization of readily available, biobased furfurals was explored as alterative to the more classical approaches that rely on reactive but uneconomical reduced dienes (e. g., 2,5-dimethylfuran). To enable cycloaddition chemistry with these otherwise unreactive formyl furans, substrate activation by N,N-dimethyl hydrazone formation was investigated. The choice of the reaction partner was key to the success of the transformation, and in this respect acrylic acid showed the most promising results in the synthesis of aromatics. This strategy allowed for selectivities up to 60 % for a complex transformation consisting of Diels-Alder cycloaddition, oxabridge opening, decarboxylation, and dehydration. Exploration of the furfural scope yielded generic structure-reactivity-stability relationships. The proposed methodology enabled the redox-efficient, operationally simple, and mild synthesis of renewable (p-disubstituted) aromatics of commercial importance under remarkably mild conditions.

Solvent-Free Hydrogenation of 5-Hydroxymethylfurfural and Furfural to Furanyl Alcohols and their Self-Condensation Polymers

2,5-Bis(hydroxymethyl)furan (BHMF) as well as furfuryl alcohol (FFA) are considered as highly valuable biomass-derived alcohols resembling aromatic monomers in polymer synthesis. Herein, a series of cobaltic nitrogen-doped carbon (Co-NC) catalysts calcinated at different temperatures were synthesized and tested for the solvent-free hydrogenation of 5-hydroxymethylfurfural (HMF) to prepare BHMF. It was found that the Co-NC catalyst calcinated at 600 °C (Co-NC-600) exhibited a superior catalytic activity in the hydrogenation reaction mainly due to the doping of graphitic N, which probably facilitated the polarization of H₂ to afford H⁺ and H^- . Consequently, Co-NC-600 offered a high BHMF/FFA yield greater than 90 % with a nearly complete conversion of HMF/furfural (FF) at the optimal conditions (80 °C, 4 h, and 5 MPa H₂ ). After the hydrogenation reaction, Co-NC catalyst was facilely recycled by magnetic separation, and the obtained BHMF/FFA was then successfully transformed into hypercrosslinked polymers with an excellent CO₂ /H₂ storage capacity comparable to aromatic hydroxymethyl polymers. Therefore, this is a novel and facile two-step pathway for the conversion of biomass-derived HMF/FF towards functional polymers from both industrial and environmental perspectives.

5-Hydroxymethylfurfural and Furfural Chemistry Toward Biobased Surfactants

The use of 5-hydroxymethylfurfural (HMF), furfural, and furan as scaffolds for designing alternative surfactants is a rapidly developing research area. This Review gathers recent examples highlighting the variety of methods for grafting the necessary polar and non-polar appendages, exploiting the specific chemical reactivity of each of these platform molecules. While the furan (or tetrahydrofuran) backbone is maintained in some targeted amphiphiles, alternatives using rearranged HMF or furfural such as cyclopentanols or furanones have also been reported. This topic is an illustration of the diversification of the use of HMF and other biobased furanic platform molecules in the field of fine and specialty chemicals. The surfactants sector, which concerns some of the most largely consumed chemicals in everyday life, and still mostly produced from fossil resources, will benefit from such alternatives enabling increased renewable carbon content and structural innovation.

Aqueous-phase Selective Hydrogenation of Furfural to Furfuryl Alcohol over Ordered-mesoporous Carbon Supported Pt Catalysts Prepared by One-step Modified Soft-template Self-assembly Method

Ordered mesoporous carbon (OMC) has attracted a great deal of attention as catalyst support due to their tunable morphological and textural properties. In this study, the characteristics and catalytic properties of OMC-supported Pt catalysts prepared by one-step modified soft-template self-assembly method (Pt/OMC-one-pot) were compared to the Pt impregnated on OMC, activated carbon (AC), and non-uniform meso/macroporous carbon (MC) in the selective hydrogenation of furfural to furfuryl alcohol (FA) under mild conditions (50°C, 2 MPa H₂). Larger Pt particle size (~4 nm) was obtained on the Pt/OMC-onepot comparing to all the impregnated ones, in which the Pt particle sizes were in the range 0.5 - 2 nm. Reduction step was not necessary on the Pt/OMC-one-pot and among the catalysts studied, the Pt/OMCone-pot exhibited the highest furfural conversion and FA selectivity under aqueous conditions. The use of methanol as the solvent resulted in the formation of solvent product (2-furaldehyde dimethyl acetal) instead. The amount of Pt being deposited, location of Pt particles, and metal-support interaction strongly affected recyclability of the catalysts because some larger size Pt particles with weak metal-support interaction could be leached out during the liquid-phase reaction, rendering similar catalytic performances of the various porous carbon supported catalysts after the 3^rd cycle of run.

Methods for the Synthesis of γ-Acetopropyl Alcohol

The methods for the synthesis of γ-acetopropyl alcohol (APA) used for the production of vitamin B₁, antimalarial drugs, and polymers are analyzed. Promising APS synthesis methods are the hydrogenation–hydration of sylvane, the hydrogenation of furfural, and syntheses based on allyl acetate, sodium acetoacetic ester, and γ-butyrolactone.

Furfural Produces Dose-Dependent Attenuating Effects on Ethanol-Induced Toxicity in the Liver

Background: Alcohol-associated liver disease (ALD) increases the health burden worldwide, but effective drugs to prevent ALD are lacking. Furfural is a small molecule that can limit alcohol production in microorganisms and may have the capacity to attenuate ethanol-induced toxicity.

Methods: Human HepG2 cells were incubated with ethanol and furfural, and cell viability, NAD⁺/NADH ratio, and mitochondrial function assays were performed. RNA sequencing (RNA-seq) data were used to annotate enriched pathways, and these findings were confirmed by reverse transcription-quantitative PCR (RT–qPCR) and Western blotting. C57BL/6J mice were fed a Lieber-DeCarli liquid diet. After 4 weeks, biochemical analysis of mouse serum and histological analysis of mouse livers were performed.

Results: Different concentrations of furfural exerted different effects on mitochondria: low-dose furfural reduced reactive oxygen species (ROS) production, maintained mitochondrial transmembrane potential, and inhibited apoptosis pathway activation, while high-dose furfural led to the opposite effects. In mice, furfural mitigated transaminase increases and attenuated the lipid metabolism disorder that had been induced by ethanol.

Conclusion: Low-dose furfural reduced ethanol-induced toxicity in the liver. Consuming food or beverages containing the appropriate level of furfural when drinking alcohol may be a convenient and useful way to prevent ALD.

Improving Lipid Production of Yarrowia lipolytica by the Aldehyde Dehydrogenase-Mediated Furfural Detoxification

Yarrowia lipolytica, the non-conventional yeast capable of high lipogenesis, is a microbial chassis for producing lipid-based biofuels and chemicals from renewable resources such as lignocellulosic biomass. However, the low tolerance of Y. lipolytica against furfural, a major inhibitory furan aldehyde derived from the pretreatment processes of lignocellulosic biomass, has restricted the efficient conversion of lignocellulosic hydrolysates. In this study, the furfural tolerance of Y. lipolytica has been improved by supporting its endogenous detoxification mechanism. Specifically, the endogenous genes encoding the aldehyde dehydrogenase family proteins were overexpressed in Y. lipolytica to support the conversion of furfural to furoic acid. Among them, YALI0E15400p (FALDH2) has shown the highest conversion rate of furfural to furoic acid and resulted in two-fold increased cell growth and lipid production in the presence of 0.4 g/L of furfural. To our knowledge, this is the first report to identify the native furfural detoxification mechanism and increase furfural resistance through rational engineering in Y. lipolytica. Overall, these results will improve the potential of Y. lipolytica to produce lipids and other value-added chemicals from a carbon-neutral feedstock of lignocellulosic biomass.

Advances in the Catalytic Reductive Amination of Furfural to Furfural Amine: The Momentous Role of Active Metal Sites

One-pot synthesis of sustainable primary amines by catalytic reductive amination of bio-based carbonyl compounds with NH₃ and H₂ is emerging as a promising and robust approach. The primary amines, especially furfuryl amine (FUA) derived from furfural (FUR), with a wide range of applications from pharmaceuticals to agrochemicals, have attracted much attention due to their versatility. This Review is majorly comprised of two segments on the reductive amination of FUR to FUA, one with precious (Ru, Pd, Rh) and the other with non-precious (Co, Ni) metals on different supports and in various solvent systems in the presence of NH₃ and H₂ . The active metal sites generated on multiple supports are accentuated with experimental evidence based on CO-diffuse reflectance infrared Fourier-transform spectroscopy, H₂ temperature-programmed reduction, X-ray photoelectron spectroscopy, and calorimetry. Moreover, this Review comprehensively describes the role of acidic and basic support for the metal on the yield of FUA. Overall, this Review provides an insight into how to design and develop an efficiently robust catalyst for the selective reductive amination of a broad spectrum of carbonyl compounds to corresponding amines.