Diastereoselective Hydrogenation of Tetrasubstituted Olefins using a Heterogeneous Pt-Ni Alloy Catalyst

Stereoselective hydrogenation of tetrasubstituted olefins is an attractive method to access compounds with two contiguous stereocenters. However, homogeneous catalysts for enantio- and diastereoselective hydrogenation exhibit low reactivity toward tetrasubstituted olefins due to steric crowding between the ligand scaffold and the substrate. Monometallic heterogeneous catalysts, on the other hand, provide accessible surface active sites for hindered olefins but exhibit unpredictable and inconsistent stereoinduction. In this work, we develop a Pt-Ni bimetallic alloy catalyst that can diastereoselectively hydrogenate unactivated, sterically-bulky tetrasubstituted olefins, utilizing the more oxophilic Ni atoms to adsorb a hydroxyl directing group and direct facially-selective hydrogen addition to the olefin via the Pt atoms. Structure-activity studies on several Pt-Ni compositions underscore the importance of exposing a uniform PtNi alloy surface to achieve high diastereoselectivity and minimize side reactions. The optimized Pt-Ni/SiO2 catalyst exhibits good functional group tolerance and broad scope for tetrasubstituted olefins in a cyclopentene scaffold, generating cyclopentanol products with three contiguous stereocenters. The synthetic utility of the method is demonstrated in a four-step synthesis of (1R,2S)-(+)-cis-methyldihydrojasmonate with high yield and enantiopurity.

Crystal, electronic structure and hydrogenation properties of the Mg5.57Ni16Ge7.43 cluster phase with a new type of polyhedron

The ternary germanide Mg5.57Ni16Ge7.43 (cubic, space group Fm\overline{3}m, cF116) belongs to the structural family based on the Th6Mn23-type. The Ge1 and Ge2 atoms fully occupy the 4a (m\overline{3}m symmetry) and 24d (m.mm) sites, respectively. The Ni1 and Ni2 atoms both fully occupy two 32f sites (.3m symmetry). The Mg/Ge statistical mixture occupies the 24e site with 4m.m symmetry. The structure of the title compound contains a three-core-shell cluster. At (0,0,0), there is a Ge1 atom which is surrounded by eight Ni atoms at the vertices of a cube and consequently six Mg atoms at the vertices of an octahedron. These surrounded eight Ni and six Mg atoms form a [Ge1Ni8(Mg/Ge)6] rhombic dodecahedron with a coordination number of 14. The [GeNi8(Mg/Ge)6] rhombic dodecahedron is encapsulated within the [Ni24] rhombicuboctahedron, which is again encapsulated within an [Ni32(Mg/Ge)24] pentacontatetrahedron; thus, the three-core-shell cluster [GeNi8(Mg/Ge)6@Ni24@Ni32(Mg/Ge)24] results. The pentacontatetrahedron is a new representative of Pavlyuk's polyhedra group based on pentagonal, tetragonal and trigonal faces. The dominance of the metallic type of bonding between atoms in the Mg5.57Ni16Ge7.43 structure is confirmed by the results of the electronic structure calculations. The hydrogen sorption capacity of this intermetallic at 570 K reaches 0.70 wt% H2.

Electrokinetic Analyses Uncover the Rate-Determining Step of Biomass-Derived Monosaccharide Electroreduction on Copper

Electrochemical biomass conversion holds promise to upcycle carbon sources and produce valuable products while reducing greenhouse gas emissions. To this end, deep insight into the interfacial mechanism is essential for the rational design of an efficient electrocatalytic route, which is still an area of active research and development. Herein, we report the reduction of dihydroxyacetone (DHA)-the simplest monosaccharide derived from glycerol feedstock-to acetol, the vital chemical intermediate in industries, with faradaic efficiency of 85±5 % on a polycrystalline Cu electrode. DHA reduction follows preceding dehydration by coordination with the carbonyl and hydroxyl groups and the subsequent hydrogenation. The electrokinetic profile indicates that the rate-determining step (RDS) includes a proton-coupled electron transfer (PCET) to the dehydrated intermediate, revealed by coverage-dependent Tafel slope and isotopic labeling experiments. An approximate zero-order dependence of H+ suggests that water acts as the proton donor for the interfacial PCET process. Leveraging these insights, we formulate microkinetic models to illustrate its origin that Eley-Rideal (E-R) dominates over Langmuir-Hinshelwood (L-H) in governing Cu-mediated DHA reduction, offering rational guidance that increasing the concentration of the adsorbed reactant alone would be sufficient to promote the activity in designing practical catalysts.

Interfacial Electronic States of GeC/g-C3N4 van der Waal Heterostructure with Promising Photocatalytic Activity via Hydrogenation

The bandgap of most known two-dimensional materials can be tuned by hydrogenation, although certain 2D materials lack a sufficient wide bandgap. Currently, it would be perfect to design non-toxic, low-cost, and high-performance photocatalysts for photocatalytic water splitting via hydrogenation. We systematically examine the impact of hydrogenation on the optical and electronic characteristics of GeC/g-C3N4 vdW heterostructures (vdWHs) with four different stacking patterns using first-principles calculations. The phonon spectra, interlayer distance, binding energies and ab initio molecular dynamics calculations show the kinetic, mechanical, and thermal stability of GeC/g-C3N4 vdWH after hydrogenation at 300, 500 and 800 K and possesses anisotropic Poisson's ratio, Young's and bulk modulus, suggesting that it's a promising candidate for experimental fabrication. According to an investigation of its electronic properties, GeC/g-C3N4 vdWH has a bandgap of 1.28 eV, but hydrogenation dramatically increases it to 2.47 eV. As a result of interface-induced electronic doping, the electronic states in g-C3N4 might be significantly adjusted by coming into contact with hydrogenated GeC sheets. The vdWH exhibits a type-II semiconductor, which can enhance the spatial separation of electron-hole pairs and has a strong red-shift of absorption coefficient than those of the constituent monolayers. The high potential drop caused by the significant valence and conduction band offsets effectively separated the charge carriers. The absorption coefficient of GeCH2/g-C3N4 vdWH is highly influenced by a biaxial compressive strain more than the biaxial tensile strain. Our theoretical research implies that the hydrogenated GeCH2/g-C3N4 vdWH possesses tunable optical and electronic behaviour for use as a hole-transport material in solar energy harvesting, nanoelectronic and optoelectronic devices.

Reversible Intrapore Redox Cycling of Platinum in Platinum-Ion-Exchanged HZSM-5 Catalysts

Isolated platinum(II) ions anchored at acid sites in the pores of zeolite HZSM-5, initially introduced by aqueous ion exchange, were reduced to form platinum nanoparticles that are stably dispersed with a narrow size distribution (1.3 ± 0.4 nm in average diameter). The nanoparticles were confined in reservoirs within the porous zeolite particles, as shown by electron beam tomography and the shape-selective catalysis of alkene hydrogenation. When the nanoparticles were oxidatively fragmented in dry air at elevated temperature, platinum returned to its initial in-pore atomically dispersed state with a charge of +2, as shown previously by X-ray absorption spectroscopy. The results determine the conditions under which platinum is retained within the pores of HZSM-5 particles during redox cycles that are characteristic of the reductive conditions of catalyst operation and the oxidative conditions of catalyst regeneration.

Recent Advances in Catalytic Systems for the Reduction of Aromatic and Aliphatic Nitrile Compounds to Amines

Amines are important and valuable compounds widely used in the chemical industry to produce various products such as dyes, detergents, solvents, additives, pharmaceutical products, and anti-foam agents. A property that distinguishes primary amines from other compounds is their straightforward functionalization. Therefore, the synthesis of different amine compounds has been considered by many researchers in recent years. Usually, primary amines are produced via amination of alcohols, reductive amination, and reduction of nitro and amide compounds. Furthermore, a useful and atom-economical method for producing primary amines is reducing nitrile compounds using catalytic systems. Traditionally, nitriles are reduced using metal hydrides such as LiAlH4 or NaBH4. These methods have important restrictions in terms of selectivity and waste generation. Hence, the heterogeneous and homogeneous catalysts were investigated for the hydrogenation of nitriles to diverse amines. This review describes the performance of different catalytic systems for reducing nitrile compounds to their corresponding amines.

Pd-Decorated Cu2O-Ag Catalyst Promoting CO2 Electroreduction to C2H4 by Optimizing CO Intermediate Adsorption and Hydrogenation

Electrocatalytic CO2 reduction reaction (CO2RR) to high value-added products, such as ethylene (C2H4), offers a promising approach to achieve carbon neutrality. Although recent studies have reported that a tandem catalyst (for example, Cu-Ag systems) exhibits advantage in C2H4 production, its practical application is largely inhibited by the following: (1) a traditional tandem catalyst cannot effectively stabilize the *CO intermediate, resulting in sluggish C-C coupling, and (2) inadequate H2O activation ability hinders the hydrogenation of intermediates. To break through the above bottleneck, herein, palladium (Pd) was introduced into Cu2O-Ag, a typical conventional tandem catalyst, to construct a Cu2O-Pd-Ag ternary catalyst. Extensive experiment and density functional theory calculation prove that Pd can efficiently stabilize the *CO intermediate and promote the H2O activation, which contributes to the C-C coupling and intermediate hydrogenation, the key steps in the conversion of CO2 to C2H4. Beneficial to the efficient synergy of Cu2O, Pd, and Ag, the optimal Cu2O-Pd-Ag ternary catalyst achieves CO2RR toward C2H4 with a faradaic efficiency of 63.2% at -1.2 VRHE, which is higher than that achieved by Cu2O-Ag and most of other reported catalysts. This work is a fruitful exploration of a rare ternary catalyst, providing a new route for constructing an efficient CO2RR electrocatalyst.

Room-Temperature Chemoselective Hydrogenation of Nitroarene Over Atomic Metal-Nonmetal Catalytic Pair

Constructing atomic catalytic pair emerges as an attractive strategy to achieve better catalytic performance. Herein, an atomic Ir1─P1/NPG catalyst with asymmetric Ir─N2P1 sites that delivers superb activity and selectivity for hydrogenation of various functionalized nitrostyrene is reported. In the hydrogenation reaction of 3-nitrostyrene, Ir1─P1/NPG (NPG refers to N, P-codoped graphene) shows a turnover frequency of 1197 h-1, while the reaction cannot occur over Ir1/NG (NG refers to N-doped graphene). Compared to Ir1/NG, the charge density of the Ir site in Ir1─P1/NPG is greatly elevated, which is conducive to H2 dissociation. Moreover, as revealed by density functional theory calculations and poisoning experiments, the P site in Ir1─P1/NPG is found able to bind nitrostyrene, while the neighboring Ir site provides H to reduce the nitro group in chemoselective hydrogenation of nitrostyrene. This work offers a successful example of establishing atomic catalytic pair for driving important chemical reactions, paving the way for the development of more advanced catalysts to further improve the catalytic performance.

Utilizing Constant Energy Difference between sp-Peak and C 1s Core Level in Photoelectron Spectra for Unambiguous Identification and Quantification of Diamond Phase in Nanodiamonds

The modification of nanodiamond (ND) surfaces has significant applications in sensing devices, drug delivery, bioimaging, and tissue engineering. Precise control of the diamond phase composition and bond configurations during ND processing and surface finalization is crucial. In this study, we conducted a comparative analysis of the graphitization process in various types of hydrogenated NDs, considering differences in ND size and quality. We prepared three types of hydrogenated NDs: high-pressure high-temperature NDs (HPHT ND-H; 0-30 nm), conventional detonation nanodiamonds (DND-H; ~5 nm), and size- and nitrogen-reduced hydrogenated nanodiamonds (snr-DND-H; 2-3 nm). The samples underwent annealing in an ultra-high vacuum and sputtering by Ar cluster ion beam (ArCIB). Samples were investigated by in situ X-ray photoelectron spectroscopy (XPS), in situ ultraviolet photoelectron spectroscopy (UPS), and Raman spectroscopy (RS). Our investigation revealed that the graphitization temperature of NDs ranges from 600 °C to 700 °C and depends on the size and crystallinity of the NDs. Smaller DND particles with a high density of defects exhibit a lower graphitization temperature. We revealed a constant energy difference of 271.3 eV between the sp-peak in the valence band spectra (at around 13.7 eV) and the sp3 component in the C 1s core level spectra (at 285.0 eV). The identification of this energy difference helps in calibrating charge shifts and serves the unambiguous identification of the sp3 bond contribution in the C 1s spectra obtained from ND samples. Results were validated through reference measurements on hydrogenated single crystal C(111)-H and highly-ordered pyrolytic graphite (HOPG).

Regioselective Partial Hydrogenation and Deuteration of Tetracyclic (Hetero)aromatic Systems Using a Simple Heterogeneous Catalyst

The introduction of added '3-dimensionality' through late-stage functionalisation of extended (hetero)aromatic systems is a powerful synthetic approach. The abundance of starting materials and cross-coupling methodologies to access the precursors allows for highly diverse products. Subsequent selective partial reduction can alter the core structure in a manner of interest to medicinal chemists. Herein, we describe the precise, partial reduction of multicyclic heteroaromatic systems using a simple heterogeneous catalyst. The approach can be extended to introduce deuterium (again at late-stage). Excellent yields can be obtained using simple reaction conditions.

Implantation of Gallium into Layered WS2 Nanostructures is Facilitated by Hydrogenation

Bombarding WS2 multilayered nanoparticles and nanotubes with focused ion beams of Ga+ ions at high doses, larger than 1016 cm-2 , leads to drastic structural changes and melting of the material. At lower doses, when the damage is negligible or significantly smaller, the amount of implanted Ga is very small. A substantial increase in the amount of implanted Ga, and not appreciable structural damage, are observed in nanoparticles previously hydrogenated by a radio-frequency activated hydrogen plasma. Density functional calculations reveal that the implantation of Ga in the spaces between adjacent layers of pristine WS2 nanoparticles is difficult due to the presence of activation barriers. In contrast, in hydrogenated WS2 , the hydrogen molecules are able to intercalate in between adjacent layers of the WS2 nanoparticles, giving rise to the expansion of the interlayer distances, that in practice leads to the vanishing of the activation barrier for Ga implantation. This facilitates the implantation of Ga atoms in the irradiation experiments.

Electrocatalytic Hydrogenation Using Palladium Membrane Reactors

Hydrogenation is a crucial chemical process employed in a myriad of industries, often facilitated by metals such as Pd, Pt, and Ni as catalysts. Traditional thermocatalytic hydrogenation usually necessitates high temperature and elevated pressure, making the process energy intensive. Electrocatalytic hydrogenation offers an alternative but suffers from issues such as competing H2 evolution, electrolyte separation, and limited solvent selection. This Perspective introduces the evolution and advantages of the electrocatalytic Pd membrane reactor (ePMR) as a solution to these challenges. ePMR utilizes a Pd membrane to physically separate the electrochemical chamber from the hydrogenation chamber, permitting the use of water as the hydrogen source and eliminating the need for H2 gas. This setup allows for greater control over reaction conditions, such as solvent and electrolyte selection, while mitigating issues such as low Faradaic efficiency and complex product separation. Several representative hydrogenation reactions (e.g., hydrogenation of C=C, C≡C, C=O, C≡N, and O=O bonds) achieved via ePMR over the past 30 years were concisely discussed to highlight the unique advantages of ePMR. Promising research directions along with the advancement of ePMR for more challenging hydrogenation reactions are also proposed. Finally, we provide a prospect for future development of this distinctive hydrogenation strategy using hydrogen-permeable membrane electrodes.

One-pot Construction of Metal Nanoparticles Loaded COF Catalysts for Aqueous Hydrogenation Reactions

The catalysis performance of metal nanoparticles (NPs) will be significantly deteriorated because of their spontaneous agglomeration during practical applications. Covalent-organic frameworks (COFs) materials with functional groups and well-defined channels benefit for the dispersion and anchor of metal ions and the confined growth of metal NPs, working as an ideal platform to compose catalytic systems. In this article, we report a one-pot strategy for the preparation of metal NPs loaded COFs without the need of post-modification. During the polymerization process, the pre-added metal ions were stabilized by the rapidly formed COF oligomers and hardly disturb the construction of COFs. After reduction, metal NPs are uniformly anchored on the COF matrix. Eventually, a wide spectrum of metal NPs, including Au, Pd, Pt, AuPd, CuPd, CuPt and CuPdPt, loaded COFs are successfully prepared. The versatility and metal ions anchoring mechanism are verified with four different COF matrixes. Taking AuPd NPs as example, the resultant AuPd NPs loaded COF materials can selectively decompose ammonium formate and produce hydrogen in-situ, exhibiting over 99 % conversion of hydrodechlorination for chlorobenzenes and nitro-reduction reaction for nitroaromatic compounds under ambient temperature in aqueous solution.

Interparticle Hydrogen Spillover in Enhanced Catalytic Reactions

Interparticle hydrogen spillover is the phenomenon of H migration over different catalyst particles, which should be a physical mixture of at least two solid catalysts. In this review, we analyze examples of enhanced catalysis based on interparticle (reverse) hydrogen spillover. Simple physical mixtures of powdered catalysts containing metal catalysts of H2 dissociation/recombination and solid catalysts with active sites for substrate activation significantly enhance catalytic reactions. These reactions include aromatic hydrogenation, CO2 methanation, and the deoxydehydration of polyols, aromatization of lower paraffins, and direct coupling of benzene and alkanes. The acceleration effect and proposed reaction pathway of each example involving interparticle (reverse) hydrogen spillover are summarized. Simple reaction systems comprising physical mixtures of at least two powdery solid catalysts should enable unique catalysis in the future with the aid of interparticle (reverse) hydrogen spillover.

Hydrogenation of Alkynes and Olefins Catalyzed by Quaternary Ammonium Salts

Catalytic hydrogenation of unsaturated hydrocarbons to alkenes and alkanes using molecular hydrogen is one of the most fundamental transformations in organic synthesis. While methodologies involving transition metals as catalysts in homogeneous and heterogeneous processes have been well developed, metal-free catalytic hydrogenation offers an ideal approach for future chemistry. Herein, the common and inexpensive quaternary ammonium salts are first introduced as catalysts in the catalytic hydrogenation system for the transformations from alkynes or olefins into the corresponding olefins or alkanes. Interestingly, the hydrogenation process of alkynes can be controlled to selectively produce alkenes or alkanes under different conditions. Moreover, the possible mechanism is discussed in new insights into the catalytic behavior of quaternary ammonium salts.

On Decorating a Honeycomb AlN Monolayer with Hydrogen and Fluorine Atoms: Ab Initio and Experimental Aspects

Mono- and few-layer hexagonal AlN (h-AlN) has emerged as an alternative "beyond graphene" and "beyond h-BN" 2D material, especially in the context of its verification in ultra-high vacuum Scanning Tunneling Microscopy and Molecular-beam Epitaxy (MBE) experiments. However, graphitic-like AlN has only been recently obtained using a scalable and semiconductor-technology-related synthesis techniques, such as metal-organic chemical vapor deposition (MOCVD), which involves a hydrogen-rich environment. Motivated by these recent experimental findings, in the present work, we carried out ab initio calculations to investigate the hydrogenation of h-AlN monolayers in a variety of functionalization configurations. We also investigated the fluorination of h-AlN monolayers in different decoration configurations. We find that a remarkable span of bandgap variation in h-AlN, from metallic properties to nar-row-bandgap semiconductor, and to wide-bandgap semiconductor can be achieved by its hy-drogenation and fluorination. Exciting application prospects may also arise from the findings that H and F decoration of h-AlN can render some such configurations magnetic. We complemented this modelling picture by disclosing a viable experimental strategy for the fluorination of h-AlN.

Reductive Metallation of Dendralenes and Myrcene Using Dimagnesium(I) Compounds: A Facile Route to Unsaturated Organomagnesium Compounds

The two-electron reduction of 2,3-dimethylbuta-1,3-diene (DMB) with β-diketiminate and guanidinate substituted dimagnesium(I) compounds has given complexes in which two bidentate amido-magnesium fragments are bridged through the π-system of the DMB dianion, viz. [(LMg)2 (μ-DMB)] (L=Xyl Nacnac, [HC(MeCNXyl)2 ]- , Xyl=2,6-xylyl; or Priso=[(DipN)2 CNPri 2 ]- , Dip=2,6-diisopropylphenyl). Similar double reductions of [4]dendralene (4dend) have afforded the complexes, [(LMg)2 (μ-4dend)] (L=Ar Nacnac, Ar=Xyl or mesityl (Mes); or Priso) in which the 4dend dianion is π-coordinated to the bidentate amido-magnesium fragments. Treatment of several such complexes with THF leads to Z- to E-isomerization of the dendralene fragment, and formation of purely σ-bonded Mg-C interactions in the THF coordinated products [{(Ar Nacnac)(THF)Mg}2 (μ-4dend)] (Ar=Xyl, Mes or Dip). Reaction of myrcene (Myr) with [{(Xyl Nacnac)Mg}2 ] proceeds via reductive coupling of Myr to give a previously unknown acyclic, branched C20 tetra-olefin dianion complex [{(Xyl Nacnac)(THF)Mg}2 (μ-Myr)2 ]. Preliminary reactions of [(LMg)2 (μ-DMB)] with H2 and/or CO yielded a series of products, including novel magnesium hydride compounds, products derived from couplings of CO with the reduced DMB fragment (viz. magnesium dimethylcyclohexadienediolates), and one magnesium cyclopropanetriolate complex from the magnesium(I) induced coupling of DMB with H2 and CO.

Strain-Induced Uphill Hydrogen Distribution in Perovskite Oxide Films

Incorporating hydrogen into transition-metal oxides (TMOs) provides a facile and powerful way to manipulate the performances of TMOs, and thus numerous efforts have been invested in developing hydrogenation methods and exploring the property modulation via hydrogen doping. However, the distribution of hydrogen ions, which is a key factor in determining the physicochemical properties on a microscopic scale, has not been clearly illustrated. Here, focusing on prototypical perovskite oxide (NdNiO3 and La0.67Sr0.33MnO3) epitaxial films, we find that hydrogen distribution exhibits an anomalous "uphill" feature (against the concentration gradient) under tensile strain, namely, the proton concentration enhances upon getting farther from the hydrogen source. Distinctly, under a compressive strain state, hydrogen shows a normal distribution without uphill features. The epitaxial strain significantly influences the chemical lattice coupling and the energy profile as a function of the hydrogen doping position, thus dominating the hydrogen distribution. Furthermore, the strain-(H+) distribution relationship is maintained in different hydrogenation methods (metal-alkali treatment) which is first applied to perovskite oxides. The discovery of strain-dependent hydrogen distribution in oxides provides insights into tailoring the magnetoelectric and energy-conversion functionalities of TMOs via strain engineering.

Development of Liquid Organic Hydrogen Carriers for Hydrogen Storage and Transport

The storage and transfer of energy require a safe technology to mitigate the global environmental issues resulting from the massive application of fossil fuels. Fuel cells have used hydrogen as a clean and efficient energy source. Nevertheless, the storage and transport of hydrogen have presented longstanding problems. Recently, liquid organic hydrogen carriers (LOHCs) have emerged as a solution to these issues. The hydrogen storage technique in LOHCs is more attractive than those of conventional energy storage systems like liquefaction, compression at high pressure, and methods of adsorption and absorption. The release and acceptance of hydrogen should be reversible by LOHC molecules following favourable reaction kinetics. LOHCs comprise liquid and semi-liquid organic compounds that are hydrogenated to store hydrogen. These hydrogenated molecules are stored and transported and finally dehydrogenated to release the required hydrogen for supplying energy. Hydrogenation and dehydrogenation are conducted catalytically for multiple cycles. This review elaborates on the characteristics of different LOHC molecules, based on their efficacy as energy generators. Additionally, different catalysts used for both hydrogenation and dehydrogenation are discussed.

Potassium-Promoted Limestone for Preferential Direct Hydrogenation of Carbonates in Integrated CO2 Capture and Utilization

Integrated CO2 capture and utilization (ICCU) via the reverse water-gas shift (RWGS) reaction offers a particularly promising route for converting diluted CO2 into CO using renewable H2. Current ICCU-RWGS processes typically involve a gas-gas catalytic reaction whose efficiency is inherently limited by the Le Chatelier principle and side reactions. Here, we show a highly efficient ICCU process based on gas-solid carbonate hydrogenation using K promoted CaO (K-CaO) as a dual functional sorbent and catalyst. Importantly, this material allows ∼100% CO2 capture efficiency during carbonation and bypasses the thermodynamic limitations of conventional gas-phase catalytic processes in hydrogenation of ICCU, achieving >95% CO2-to-CO conversion with ∼100% selectivity. We showed that the excellent functionalities of the K-CaO materials arose from the formation of K2Ca(CO3)2 bicarbonates with septal K2CO3 and CaCO3 layers, which preferentially undergo a direct gas-solid phase carbonates hydrogenation leading to the formation of CO, K2CO3 CaO and H2O. This work highlights the immediate potential of K-CaO as a class of dual-functional material for highly efficient ICCU and provides a new rationale for designing functional materials that could benefit the real-life application of ICCU processes.

Noble-Metal-Free Carbon Encapsulated CoNi Alloy Catalyst for the Hydrogenation of 5-(Hydroxymethyl) Furfural to Tetrahydrofurandiol in Aqueous Media

The selective hydrogenation of 5-(hydroxymethyl)furfural (HMF) into 2,5-bis-(hydroxymethyl)tetrahydrofuran (BHMTHF) in flow reactor using water as a green solvent, has been achieved on a non-noble metal catalyst based on monodispersed CoNi alloy nanoparticles covered by a thin carbon layer. The alloyed catalyst containing CoNi (molar ratio 1 : 1) was prepared in a one-step synthesis following a hydrothermal method. Total conversion of HMF with 91 % selectivity to BHMTHF was achieved. The reaction network has been stablished, in which the carbonyl group of HMF is first reduced to alcohol giving the 2,5-bis-(hydroxymethyl)furan (BHMF) with an apparent activation energy of 25 KJ/mol, and then the double bonds of the furan ring are hydrogenated (apparent Ea=31 KJ/mol). Formation of byproducts, mainly proceed from furan ring opening and ring rearrangement processes of BHMF, promoted by water. BHMTHF resulted a compound highly stable under reaction conditions. The fixed bed flow reactor was maintained operational for 65 h without observing any loss of catalytic activity and selectivity.

Hydrogenation of Terminal Alkenes Catalyzed by Air-Stable Mn(I) Complexes Bearing an N-Heterocyclic Carbene-Based PCP Pincer Ligand

Efficient hydrogenations of terminal alkenes with molecular hydrogen catalyzed by well-defined bench stable Mn(I) complexes containing an N-heterocyclic carbene-based PCP pincer ligand are described. These reactions are environmentally benign and atom economic, implementing an inexpensive, earth abundant non-precious metal catalyst. A range of aromatic and aliphatic alkenes were efficiently converted into alkanes in good to excellent yields. The hydrogenation proceeds at 100 °C with catalyst loadings of 0.25-0.5 mol %, 2.5-5 mol % base (KOt Bu) and a hydrogen pressure of 20 bar. Mechanistic insight into the catalytic reaction is provided by means of DFT calculations.

Transition metal phosphides: synthesis nanoarchitectonics, catalytic properties, and biomass conversion applications

Developing inexpensive and efficient catalysts for biomass hydrogenation or hydrodeoxygenation (HDO) is essential for efficient energy conversion. Transition metal phosphides (TMPs), with the merits of abundant active sites, unique physicochemical properties, tunable component structures, and excellent catalytic activities, are recognized as promising biomass hydrogenation or HDO catalytic materials. Nevertheless, the biomass hydrogenation or HDO catalytic applications of TMPs are still limited by various complexities and inherent performance bottlenecks, and thus their future development and utilization remain to be systematically sorted out and further explored. This review summarizes the current popular strategies for the preparation of TMPs. Subsequently, based on the structural and electronic properties of TMPs, the catalytic activity origins of TMPs in biomass hydrogenation or HDO is elucidated. Additionally, the application of TMPs in efficient biomass hydrogenation or HDO catalysis, as well as highly targeted multiscale strategies to enhance the catalytic performance of TMPs, are comprehensively described. Finally, large-scale amplification synthesis, rational construction of TMP-based catalysts and in-depth study of the catalytic mechanism are also mentioned as challenges and future directions in this research field. Expectedly, this review can provide professional and targeted guidance for the rational design and practical application of TMPs biomass hydrogenation or HDO catalysts.

Leveraging Curvature on N-Doped Carbon Materials for Hydrogen Storage

Carbon sorbent materials have shown great promise for solid-state hydrogen (H2 ) storage. Modification of these materials with nitrogen (N) dopants has been undertaken to develop materials that can store H2 at ambient temperatures. In this work density functional theory (DFT) calculations are used to systematically probe the influence of curvature on the stability and activity of undoped and N-doped carbon materials toward H binding. Specifically, four models of carbon materials are used: graphene, [5,5] carbon nanotube, [5,5] D5d -C120, and C60 , to extract and correlate the thermodynamic properties of active sites with varying degrees of sp2 hybridization (curvature). From the calculations and analysis, it is found that graphitic N-doping is thermodynamically favored on more pyramidal sites with increased curvature. In contrast, it is found that the hydrogen binding energy is weakly affected by curvature and is dominated by electronic effects induced by N-doping. These findings highlight the importance of modulating the heteroatom doping configuration and the lattice topology when developing materials for H2 storage.

Novel Dihydrocoumarins Induced by Radiolysis as Potent Tyrosinase Inhibitors

A representative naturally occurring coumarin, 4-methylumbelliferone (5), was exposed to 50 kGy of gamma ray, resulting in four newly generated dihydrocoumarin products 1-4 induced by the gamma irradiation. The structures of these new products were elucidated by interpretation of spectroscopic data (NMR, MS, [α]D, and UV). The unusual bisdihydrocoumarin 4 exhibited improved tyrosinase inhibitory capacity toward mushroom tyrosinase with IC50 values of 19.8 ± 0.5 μM as compared to the original 4-methylumbelliferone (5). A kinetic analysis also exhibited that the potent metabolite 4 had non-competitive modes of action. Linkage of the hydroxymethyl group in the C-3 and C-4 positions on the lactone ring probably enhances the tyrosinase inhibitory effect of 4-methylumbelliferone (5). Thus, the novel coumarin analog 4 is an interesting new class of tyrosinase inhibitory candidates that requires further examination.

Synthesis of Pd/Carbon Hollow Spheres by the Microwave Discharge Method for Catalytic Debenzylation

Pd/C catalysts have been widely applied in the debenzylation process due to their excellent ability of hydrogenolysis. However, they have been suffering from the problems of agglomeration and loss of active components, which lead to decreased and unstable activity. Thus, it is still a challenge to achieve Pd/C catalysts with high activity and stability. Herein, we propose a strategy for preparing Pd/C catalysts on porous carbon hollow spheres by a microwave discharge method. Due to the high-temperature property and reducibility of microwave discharge, Pd precursors can be rapidly reduced, resulting in well-dispersed Pd nanoparticles with a small size on the carbon carrier. Besides, the matched mesopores in the carbon hollow spheres can anchor Pd nanoparticles and effectively reduce the agglomeration and loss of Pd nanoparticles during the catalytic reaction. As a result, the as-prepared Pd/mesoporous carbon hollow spheres exhibit high and stable activity in the debenzylation reaction.

Understanding the Role of Base Species on Reversed Cu Catalyst in Ring Opening of Furan Compounds to 1, 2-Pentanediol

The hydrogenation of biomass-derived furan compounds provides a sustainable pathway for the production of various valuable chemicals; product selectivity among multiple reaction pathways of furan compound hydrogenation is crucially dependent on catalytic sites; however controlling reaction pathways remains challenging due to the lack of identification and understanding of active sites. In this work we reveal the role of base sites in furfural selective hydrogenation through deliberately designed and synthesized reversed catalysts, basic metal oxides and hydroxide on Cu. It is demonstrated that base species greatly enhanced the selectivity of 1, 2-pentanediol (1, 2-PeD) from furfural, presenting a nearly fourfold increase of 1, 2-PeD: methyl furan ratio over the Cu based reverse catalysts. A combination of infrared spectroscopy and DFT calculations demonstrates the strong interaction between the C-O-C bond in furan ring and the catalyst surface in preferentially parallel adsorption mode in the presence of base species on Cu, thus facilitating the activation of C-O-C bond to produce 1, 2-PeD. This work provides a strategy of designing reversed catalyst to study the effect of promoters and reveals the role of base sites in the hydrogenation of biomass-derived furan compounds to diols.

Nickel Carbide Nanoparticle Catalyst for Selective Hydrogenation of Nitriles to Primary Amines

Despite its unique physicochemical properties, the catalytic application of nickel carbide (Ni3 C) in organic synthesis is rare. In this study, we report well-defined nanocrystalline Ni3 C (nano-Ni3 C) as a highly active catalyst for the selective hydrogenation of nitriles to primary amines. The activity of the aluminum-oxide-supported nano-Ni3 C (nano-Ni3 C/Al2 O3 ) catalyst surpasses that of Ni nanoparticles. Various aromatic and aliphatic nitriles and dinitriles were successfully converted to the corresponding primary amines under mild conditions (1 bar H2 pressure). Furthermore, the nano-Ni3 C/Al2 O3 catalyst was reusable and applicable to gram-scale experiments. Density functional theory calculations suggest the formation of polar hydrogen species on the nano-Ni3 C surface, which were attributed to the high activity of nano-Ni3 C towards nitrile hydrogenation. This study demonstrates the utility of metal carbides as a new class of catalysts for liquid-phase organic reactions.

Catalytic Conversion of Levulinic Acid into 2-Methyltetrahydrofuran: A Review

Biomass-derived furanics play a pivotal role in chemical industries, with 2-methyltetrahydrofuran (2-MTHF), a hydrogenated product of levulinic acid (LA), being particularly significant. 2-MTHF finds valuable applications in the fuel, polymer, and chemical sectors, serving as a key component in P-series biofuel and acknowledged as a renewable solvent for various chemical processes. Numerous research groups have explored catalytic systems to efficiently and selectively convert LA to 2-MTHF, using diverse metal-supported catalysts in different solvents under batch or continuous process conditions. This comprehensive review delves into the impact of metal-supported catalysts, encompassing co-metals and co-catalysts, on the synthesis of 2-MTHF from LA. The article also elucidates the influence of different reaction parameters, such as temperature, type and quantity of hydrogen source, and time. Furthermore, the review provides insights into reaction mechanisms for all documented catalytic systems.

Direct Conversion of CO2 into Alcohols Using Cu-Based Zeolite Catalysts

The direct hydrogenation of CO2 into alcohols is an attractive but challenging catalytic reaction. Herein, it was shown that Cu nanoparticles supported on MFI and BEA zeolites have high catalytic activity and selectivity for converting CO2 into ethanol and isopropanol. Furthermore, we investigated the effect of introducing mesopores via carbon templating and encapsulating the Cu nanoparticles via subsequent recrystallization. All the catalysts were characterized by N2 physisorption, XRD, SEM, TEM, NH3 TPD, XPS, and XRF, before we tested them in a high-pressure water-filled autoclave with a constant partial pressure of CO2 (1 MPa) and an increasing partial pressure of H2 (3-5 MPa). In general, the mesoporous zeolite catalysts resulted in a higher CO2 conversion and selectivity toward ethanol than their non-mesoporous equivalents, while the recrystallized catalyst with encapsulated Cu nanoparticles had a higher selectivity towards isopropanol. For example, Cu@m-S1 showed the highest isopropanol productivity among the recrystallized mesoporous zeolites, corresponding to 20.51 mmol g-1  h-1 under the given reaction conditions. These findings highlight the importance of mesopores in zeolite catalysts for CO2 hydrogenation to alcohols and point a new direction for further research and development.

Hydrogenation of silicon-nanocrystals-embedded silicon oxide passivating contacts

We investigate the effect of hydrogen passivation of dangling bonds in silicon oxide passivating contacts with embedded silicon nanocrystals (NAnocrystalline Transport path in Ultra-thin dielectrics for REinforced passivation contact, NATURE contact). We first investigated the differences in electrical properties of the samples after hydrogen gas annealing and hydrogen plasma treatment (HPT). The results show that the NATURE contact was efficiently passivated by hydrogen after HPT owing to the introduction of hydrogen radicals into the structure. Furthermore, we examined the dependence of process parameters such as HPT temperature, duration, and H2pressure, on the electrical properties and hydrogen depth profiles. As a result, HPT at 500 °C, 15 min, and 0.5 Torr resulted in a large amount of hydrogen inside the NATURE contact and the highest implied open-circuit voltage of 724 mV. Contact resistivity and surface roughness hardly increased when HPT was performed under the optimized condition, which only improved the passivation performance without deteriorating the electron transport properties of the NATURE contact.

Microwave-Driven Exsolution of Ni Nanoparticles in A-Site Deficient Perovskites

Exsolution has emerged as a promising method for generating metallic nanoparticles, whose robustness and stability outperform those of more conventional deposition methods, such as impregnation. In general, exsolution involves the migration of transition metal cations, typically perovskites, under reducing conditions, leading to the nucleation of well-anchored metallic nanoparticles on the oxide surface with particular properties. There is growing interest in exploring alternative methods for exsolution that do not rely on high-temperature reduction via hydrogen. For example, utilizing electrochemical potentials or plasma technologies has shown promising results in terms of faster exsolution, leading to better dispersion of nanoparticles under milder conditions. To avoid limitations in scaling up exhibited by electrochemical cells and plasma-generation devices, we proposed a method based on pulsed microwave (MW) radiation to drive the exsolution of metallic nanoparticles. Here, we demonstrate the H2-free MW-driven exsolution of Ni nanoparticles from lanthanum strontium titanates, characterizing the mechanism that provides control over nanoparticle size and dispersion and enhanced catalytic activity and stability for CO2 hydrogenation. The presented method will enable the production of metallic nanoparticles with a high potential for scalability, requiring short exposure times and low temperatures.

Air-Stable Ni Catalysts Prepared by Liquid-Phase Reduction Using Hydrosilanes for Reactions with Hydrogen

The liquid-phase reduction method for the preparation of metal nanoparticles (NPs) by the reduction of metal salts or metal complexes in a solvent with a reducing agent is widely used to prepare Ni NPs that exhibit high catalytic activity in various organic transformations. Intensive research has been conducted on control of the morphology and size of Ni NPs by the addition of polymers and long-chain compounds as protective agents; however, these agents typically cause a decrease in catalytic activity. Here, we report on the preparation of Ni NPs using hydrosilane (Ni-Si) as a reducing agent and a size-controlling agent. The substituents on silicon can control not only the size but also the crystal phase of the Ni NPs. The prepared Ni NPs exhibited high catalytic performance for the hydrogenation of unsaturated compounds, aromatics, and heteroaromatics to give the corresponding hydrogenated products in high yields. The unique feature of Ni catalysts prepared by the hydrosilane-assisted method is that the catalysts can be handled under air as opposed to conventional Ni catalysts such as Raney Ni. Characterization studies indicated that the surface hydroxide was reduced under the catalytic reaction conditions with H2 at around 100 °C and with the assistance of organosilicon compounds deposited on the catalyst surface. The hydrosilane-assisted method presented here could be applied to the preparation of supported Ni catalysts (Ni-Si/support). The interaction between the Ni NPs and a metal oxide support enabled the direct amination of alcohols with ammonia to afford the primary amine selectively.

Analysis of Mechanical Properties of Welded Joint Metal from TPP Steam Piping after Its Operational Degradation and Hydrogenation

In this paper, the mechanical properties of various zones of the welded joints of a heat-resistant steel 15Kh1M1F in different states (in the initial state, after an operation on the main steam piping of a thermal power plant (TPP) for 23 years) were determined, and the fracture surfaces were analyzed using scanning electron microscopy (SEM) images. The effect of hydrogen electrolytic charging on mechanical behavior and fracture mechanism was also studied. The long-term operation of welds resulted in a higher degradation degree of the weld metal compared to the base one, indicated by the deterioration of mechanical properties: decrease in hardness, strength characteristics, and reduction in area, which was accompanied by an atypical increase in elongation at fracture. All studied zones of the operated welded joints were characterized by higher hydrogen content, 2.5-3 times higher than that in the initial state. Additional hydrogen charging of the weld joint metal led to a decrease in the strength and ductility characteristics, more significantly for the operated weld compared with the non-operated one. This justified the possibility of using short-term tests of hydrogenated WM in the air to assess the degree of its damage during operation on a steam piping.

Reversible Binding of Hydrogen and Styrene Coordination on a Manganese Phosphenium Complex

The reactions of two complexes [(R NHP)Mn(CO)4 ] (R NHP=N-arylated N-heterocyclic phosphenium) with H2 at elevated pressure (≈4 bar) were studied by NMR spectroscopy. Irradiation with UV light initialized in one case (5 a, R=Dipp) the unselective formation of (R NHP-H)MnH(CO)4 ] (6 a) via cooperative addition of H2 across the Mn=P double bond. In the other case (5 b, R=Mes), addition of H2 was unobservable and the reaction proceeded via decarbonylation to a dimeric species [(R NHP)2 Mn2 (CO)7 ] (7 b) that was isolated and identified spectroscopically. Taking into account the outcome of further reaction studies under various conditions in the absence and presence of H2 , both transformations can be explained in the context of a common mechanism involving decarbonylation to 7 a,b as the first step, and the different outcome is attributable to the fact that 7 b is unreactive towards both H2 and CO while 7 a is not. DFT studies relate this divergence to deviations in the molecular constitution and stability arising from a different level of steric congestion. Preliminary studies suggest further that 5 a/H2 as well as 6 a enable the photo-induced hydrogenation of styrene to ethyl benzene, even if the mechanism and possibly catalytic nature of this process remain yet unknown.

Hydrogenation of CO2 by a Bifunctional PC(sp3 )P Iridium(III) Pincer Complex Equipped with Tertiary Amine as a Functional Group

Reversible hydrogen storage in the form of stable and mostly harmless chemical substances such as formic acid (FA) is a cornerstone of a fossil fuels-free economy. In the past, we have reported a primary amine-functionalized bifunctional iridium(III)-PC(sp3 )P pincer complex as a mild and chemoselective catalyst for the additive-free decomposition of neat formic acid. In this manuscript, we report on the successful application of a redesigned complex bearing tertiary amine functionality as a catalyst for mild hydrogenation of CO2 to formic acid. The catalyst demonstrates TON up to 6×104 and TOF up to 1.7×104  h-1 . In addition to the practical value of the catalyst, experimental and computational mechanistic studies provide the rationale for the design of improved next-generation catalysts.

Dual Pd-Acid Sites Confined in a Hierarchical Core-Shell Structure for Hydrogenation of Nitrobenzene

A core-shell structured Pd@TS-1@meso-SiO2 catalyst with confined Pd nanometals has been fabricated by one-pot synthesis, impregnation method and sol-gel method. With the promotion of acid sites and protection of mesoporous silica shell, Pd@TS-1@meso-SiO2 shows higher activity than commercial comparison and higher stability than sample without mesoporous silica shell in the hydrogenation of nitrobenzene. The schematic illustration of the synergy effect is also proposed.

Highly Enantioselective Synthesis of Pharmaceuticals at Chiral-Encoded Metal Surfaces

Enantioselective catalysis is of crucial importance in modern chemistry and pharmaceutical science. Although various concepts have been used for the development of enantioselective catalysts to obtain highly pure chiral compounds, most of them are based on homogeneous catalytic systems. Recently, we successfully developed nanostructured metal layers imprinted with chiral information, which were applied as electrocatalysts for the enantioselective synthesis of chiral model compounds. However, so far such materials have not been employed as heterogeneous catalysts for the enantioselective synthesis of real pharmaceutical products. In this contribution, we report the asymmetric synthesis of chiral pharmaceuticals (CPs) with chiral imprinted Pt-Ir surfaces as a simple hydrogenation catalyst. By fine-tuning the experimental parameters, a very high enantioselectivity (up to 95 % enantiomeric excess) with good catalyst stability can be achieved. The designed materials were also successfully used as catalytically active stationary phases for the continuous asymmetric flow synthesis of pharmaceutical compounds. This illustrates the possibility of producing real chiral pharmaceuticals at such nanostructured metal surfaces for the first time.

Phosphine-Enhanced Semi-Hydrogenation of Phenylacetylene by Cobalt Phosphide Nano-Urchins

Transition metal phosphides are promising, selective, and air-stable nanocatalysts for hydrogenation reactions. However, they often require fairly high temperatures and H2 pressures to provide quantitative conversions. This work reports the positive effect of phosphine additives on the activity of cobalt phosphide nano-urchins for the semi-hydrogenation of phenylacetylene. While the nanocatalyst's activity was low under mild conditions (7 bar of H2 , 100 °C), the addition of a catalytic amount of phosphine remarkably increased the conversion, e. g., from 13 % to 98 % in the case of Pn Bu3 . The heterogeneous nature of the catalyst was confirmed by negative supernatant activity tests. The catalyst integrity was carefully verified by post-mortem analyses (TEM, XPS, and liquid 31 P NMR). A stereo-electronic map was proposed to rationalize the activity enhancement provided over a selection of nine phosphines: the strongest effect was observed for low to moderately hindered phosphines, associated with strong electron donor abilities. A threshold in phosphine stoichiometry was revealed for the enhancement of activity to occur, which was related to the ratio of phosphine to surface cobalt atoms.

Binary Metal-Oxide Active Sites Derived from Cu-Doped MIL-88 with Enhanced Electroactivity for Nitrate Reduction

Nitrate-to-ammonia electrochemical conversion is important for decreasing water pollution and increasing the production of valuable ammonia. However, achieving high ammonium production without undesirable byproducts is difficult. Cu-doped MIL-88-derived bimetallic oxide catalysts with electrocatalytically active Fe-O-Cu bridges, which have high NO3- adsorption energy and facilitate N-intermediate hydrogenation, are developed for NH4+ production. Cu doping promotes hybridization between the O 2p of NO3- and Fe-Cu 3d, facilitating the adsorption and reduction of NO3- with a low Tafel slope (62.1 mV dec-1) and high ammonia yield (1698.8 μg·h-1·cm-2). The cathode efficiency is stable for seven cycles. Cu adjacent to Fe sites inhibits hydrogen evolution, promotes NO3- adsorption, and decreases the intermediate adsorption energy barrier. This study provides new opportunities for fabricating diverse binary metal oxides with new interfaces as efficient cathode materials for selective electroreduction.

XPS and HR TEM Elucidation of the Diversity of Titania-Supported Single-Site Ir Catalyst Performance in Spin-Selective Propene Hydrogenation

Immobilized [Ir(COD)Cl]2-Linker/TiO2 catalysts with linkers containing Py, P(Ph)2 and N(CH3)2 functional groups were prepared. The catalysts were tested via propene hydrogenation with parahydrogen in a temperature range from 40 °C to 120 °C which was monitored via NMR. The catalytic behavior of [Ir(COD)Cl]2-Linker/TiO2 is explained on the basis of quantitative and qualitative XPS data analysis performed for the catalysts before and after the reaction at 120 °C. It is shown that the temperature dependence of propene conversion and the enhancement of the NMR signal are explained via a combination of the stabilities of both the linker and immobilized [Ir(COD)Cl]2 complex. It is demonstrated that the N(CH3)2-linker is the most stable at the surface of TiO2 under used reaction conditions. As a result, only this sample shows a rise in the enhancement of the NMR signal in the 100-120 °C temperature range.

Recent Progress and Opportunity of Metal Single-Atom Catalysts for Biomass Conversion Reactions

The conversion of lignocellulosic biomass into platform chemicals and fuels by metal single atoms is a new domain in solid catalysis research. Unlike the conventional catalysis route, single-atom catalysts (SACs) proliferate maximum utilization efficiency, high catalytic activity, and good selectivity to the desired product with an ultralow loading of the active sites. More strikingly, SACs show a unique cost-effective pathway for the conversion of complex sugar molecules to value-added chemicals in high yield and selectivity, which may be hindered by conventional metal nanoparticles. Primarily, SACs having adjustable active sites could be easily modified using sophisticated synthetic techniques based on their intended reactions. This review covers current research on the use of SACs with a strong emphasis on the fundamentals of catalyst design, and their distinctive activities in each type of reaction (hydrogenation, hydrogenolysis, hydrodeoxygenation, oxidation, and dehydrogenation). Furthermore, the fundamental insights into the superior actions of SACs within the opportunity and prospects for the industrial-scale synthesis of value-added products from the lignocelluloses are covered.

Base Metal Catalyst for Indirect Hydrogenation of CO2

We herein report a novel Mn-SNS-based catalyst, which is capable of performing indirect hydrogenation of CO2 to methanol via formylation. In this domain of CO2 hydrogenation, pincer ligands have shown a clear predominance. Our catalyst is based on the SNS-type tridentate ligand, which is quite stable and cheap as compared to the pincer type ligands. The catalyst can also be recycled effectively after the formylation reaction without any significant change in efficiency. Various amines including both primary and secondary amines worked well under the protocol to provide the desired formylated product in good yields. The formed formylated amines can also be reduced further at higher pressures of hydrogen. As a whole, we have developed a protocol that involves indirect CO2 hydrogenation to methanol that proceeds via formylation of amines.

Ultrathin Atomic Layer Deposited Al2O3 Overcoat Stabilizes Al2O3-Pt/Ni-Foam Hydrogenation Catalysts

Galvanic exchange seeds the growth of Pt nanostructures on the Ni foam monolith. Subsequent atomic layer deposition of ultrathin Al2O3 followed by annealing under air affords supported Pt catalysts with ultralow loading (0.020 ppm). In addition to the expected enhancement of the stability of the Pt particles on the surface, the ∼2 nm Al2O3 overcoat appears to also play a crucial role in the overall structural integrity of the NiOx nanoplates that grow on the Ni foam surface as a result of the preparative route. The resulting material is physically robust toward repeated handling and showcases retention of catalytic activity over 10 standard catalyst recycling trials, standing in marked contrast to the uncoated samples. Catalyst activity was tested via the hydrogenation of various functionalized styrenes at low temperatures and low hydrogen pressure in ethanol as a solvent, with a TOF as high as 9.5 × 106 h-1 for unfunctionalized styrene. Notably, the catalysts show excellent tolerance toward F, Cl, and Br substituents and no hydrogenation of the aromatic ring.

Saturated Cannabinoids: Update on Synthesis Strategies and Biological Studies of These Emerging Cannabinoid Analogs

Natural and non-natural hexahydrocannabinols (HHC) were first described in 1940 by Adam and in late 2021 arose on the drug market in the United States and in some European countries. A background on the discovery, synthesis, and pharmacology studies of hydrogenated and saturated cannabinoids is described. This is harmonized with a summary and comparison of the cannabinoid receptor affinities of various classical, hybrid, and non-classical saturated cannabinoids. A discussion of structure-activity relationships with the four different pharmacophores found in the cannabinoid scaffold is added to this review. According to laboratory studies in vitro, and in several animal species in vivo, HHC is reported to have broadly similar effects to Δ9-tetrahydrocannabinol (Δ9-THC), the main psychoactive substance in cannabis, as demonstrated both in vitro and in several animal species in vivo. However, the effects of HHC treatment have not been studied in humans, and thus a biological profile has not been established.

Amine Functionalization Leads to Enhanced Performance for Nickel- and Cobalt-Ferrite-Supported Palladium Catalysts in Nitrobenzene Hydrogenation

Easy preparation, good yield and easy recovery are the key challenges in the development of industrial catalysts. To meet all these three criteria, we have prepared intelligent, magnetizable NiFe2O4- and CoFe2O4-supported palladium catalysts that can be easily and completely recovered from the reaction medium by magnetic separation. The fast and facile preparation was achieved by a solvothermal method followed by sonochemical-assisted decomposition of the palladium nanoparticles onto the surface of the magnetic nanoparticles. The metal-support interaction was enhanced by amine functionalization of the supports using monoethanolamine. The performance and stability of the non-functionalized and amine-functionalized NiFe2O4- and CoFe2O4-supported palladium catalysts were compared in the industrially important nitrobenzene hydrogenation reaction. All catalysts showed high catalytic activity during aniline synthesis; complete nitrobenzene conversion and high aniline yield (above 97 n/n%) and selectivity (above 98 n/n%) were achieved. However, during reuse tests, the activity of the non-functionalized catalysts decreased, as the palladium was leached from the surface of the support. On the other hand, in the case of their amine-functionalized counterparts, there was no decrease in activity, and a non-significant decrease in palladium content could be measured. Based on these results, it can be concluded that amine functionalization of transition metal ferrites may result in more effective catalysts due to the enhanced metal-carrier interaction between the support and the precious metal.

Continuous Ligand-Free Catalysis Using a Hybrid Polymer Network Support

Although the pharmaceutical and fine chemical industries primarily utilize batch homogeneous reactions to carry out chemical transformations, emerging platforms seek to improve existing shortcomings by designing effective heterogeneous catalysis systems in continuous flow reactors. In this work, we present a versatile network-supported palladium (Pd) catalyst using a hybrid polymer of poly(methylvinylether-alt-maleic anhydride) and branched polyethyleneimine for intensified continuous flow synthesis of complex organic compounds via heterogeneous Suzuki-Miyaura cross-coupling and nitroarene hydrogenation reactions. The hydrophilicity of the hybrid polymer network facilitates the reagent mass transfer throughout the bulk of the catalyst particles. Through rapid automated exploration of the continuous and discrete parameters, as well as substrate scope screening, we identified optimal hybrid network-supported Pd catalyst composition and process parameters for Suzuki-Miyaura cross-coupling reactions of aryl bromides with steady-state yields up to 92% with a nominal residence time of 20 min. The developed heterogeneous catalytic system exhibits high activity and mechanical stability with no detectable Pd leaching at reaction temperatures up to 95 °C. Additionally, the versatility of the hybrid network-supported Pd catalyst is demonstrated by successfully performing continuous nitroarene hydrogenation with short residence times (<5 min) at room temperature. Room temperature hydrogenation yields of >99% were achieved in under 2 min nominal residence times with no leaching and catalyst deactivation for more than 20 h continuous time on stream. This catalytic system shows its industrial utility with significantly improved reaction yields of challenging substrates and its utility of environmentally-friendly solvent mixtures, high reusability, scalable and cost-effective synthesis, and multi-reaction successes.

Continuous Flow Hydrogenation of Lignin-model Aromatic Compounds over Carbon-supported Noble Metals

An efficient continuous-flow (CF) protocol was designed for the hydrogenation of lignin-derived aromatics to the corresponding cycloalkanes derivatives. A parametric analysis of the reaction was carried out by tuning the temperature, the H2 pressure and the flow rate, and using diphenyl ether (DPE) as a model substrate, commercial Ru/C as a catalyst, and isopropanol as a solvent: at 25 °C, 50 bar H2 , and a flow rate of 0.1 mL min-1 , dicyclohexyl ether was achieved in an 86 % selectivity, at quantitative conversion. By-products from the competitive C-O bond cleavage of DPE, cyclohexanol and cyclohexane, did not exceed 14 % in total. Remarkably, prolonged experiments demonstrated an excellent stability of the catalyst whose performance was unaltered for up to 420 min of time-of-stream. A substrate scope evaluation proved that under the same conditions used for DPE, a variety of substrates including alkoxy-, allyl-, and carbonyl-functionalized phenols, biphenyl, aryl benzyl- and phenethyl ethers (10 examples) yielded the ring-hydrogenated products with selectivity up to 99 % at complete conversion.

Preparation and Testing of a Palladium-Decorated Nitrogen-Doped Carbon Foam Catalyst for the Hydrogenation of Benzophenone

Catalytic activity of a palladium catalyst with a porous carbon support was prepared and tested for benzophenone hydrogenation. The selectivity and yields toward the two possible reaction products (benzhydrol and diphenylmethane) can be directed by the applied solvent. It was found that in isopropanol, the prepared support was selective towards diphenylmethane with high conversion (99% selectivity and 99% benzophenone conversion on 323 K after 240 min). This selectivity might be explained by the presence of the incorporated structural nitrogens in the support.

Palladated Cyclodextrin Nanosponge-Alginate Dual Bead as an Efficient Catalyst for Hydrogenation of Nitroarenes in Aqueous Solution

In this study, we present a novel composite material consisting of β-cyclodextrin nanosponge and sodium alginate, used as a support for the immobilization of palladium (Pd) nanoparticles. The composite alginate-cyclodextrin nanosponge beads were prepared, taking advantage of the 3D polymeric network and β-cyclodextrin cavity of the nanosponge. These beads exhibited excellent encapsulation capabilities for hydrophobic substrates, allowing their transfer in aqueous media. The cyclodextrin nanosponge served as a stabilizer for Pd nanoparticles and facilitated phase transfer. Additionally, the sodium alginate bead contributed to the robustness of the structure and improved the recovery and recyclability of the composite material. Comparative studies with control catalysts confirmed the beneficial effect of incorporating cyclodextrin nanosponge within alginate beads, particularly for more hydrophobic substrates. Optimization of reaction conditions revealed that employing 0.03 g of catalyst per mmol of nitroarene at 45 °C resulted in the maximum yield within 90 min. Evaluation of the substrate scope demonstrated the hydrogenation capability of various substrates with different electronic properties under the developed protocol. Notably, the nitro group was selectively reduced in substrates featuring competing functionalities. Furthermore, the recyclability and stability of the composite catalyst were confirmed, making it a promising candidate for sustainable catalysis.