Large-Area Conductive MOF Ultrathin Film Controllably Integrating Dinuclear-Metal Sites and Photosensitizers to Boost Photocatalytic CO2 Reduction with H2O as an Electron Donor

Owing to the electrical conductivity and periodic porosity, conductive metal-organic framework (cMOF) ultrathin films open new perspectives to photocatalysis. The space-selective assembly of catalytic sites and photosensitizers in/on cMOF is favorable for promoting the separation of photogenerated carriers and mass transfer. However, the controllable integration of functional units into the cMOF film is rarely reported. Herein, via the synergistic effect of steric hindrance and an electrostatic-driven strategy, the dinuclear-metal molecular catalysts (DMC) and perovskite (PVK) quantum dot photosensitizers were immobilized into channels and onto the surface of cMOF ultrathin films, respectively, affording [DMC@cMOF]-PVK film photocatalysts. In this unique heterostructure, cMOF not only facilitated the charge transfer from PVK to DMC but also guaranteed mass transfer. Using H2O as an electron donor, [DMC@cMOF]-PVK realized a 133.36 μmol·g-1·h-1 CO yield in photocatalytic CO2 reduction, much higher than PVK and DMC-PVK. Owing to the excellent light transmission of films, multilayers of [DMC@cMOF]-PVK were integrated to increase the CO yield per unit area, and the 10-layer device realized a 1115.92 μmol·m-2 CO yield in 4 h, which was 8-fold higher than that of powder counterpart. This work not only lightens the development of cMOF-based composite films but also paves a novel avenue for an ultrathin film photocatalyst.

Construction of a molecularly imprinted fluorescent sensor based on an amphiphilic block copolymer-metal-organic framework for the detection of oxytetracycline in milk

A metal-organic framework (MOF) is a good carrier for molecular imprinting due to its high surface area and strong adsorption capacity, but its poor dispersibility in aqueous solution is one of the significant drawbacks, which can severely impede its effectiveness. Amphiphilic block copolymers are good hydrophilic materials and have the potential to overcome the shortcomings of MOFs. In order to improve the hydrophilicity of molecularly imprinted fluorescent materials, we have applied a combination of molecularly imprinted technology and amphiphilic block copolymers on MOFs for the first time. Amphiphilic PAVE copolymer is selected as the molecular imprinted functional monomer to improve the hydrophilicity of UiO-66-NH2. The synthesized PAVE-MOF-MIP has adequate water dispersion ability and fluorescence activity. When encountering oxytetracycline, PAVE-MOF-MIP will produce fluorescence quenching, it is used to construct a fluorescence detection platform for oxytetracycline detection. Compared with traditional MIP@MOF, PAVE-MOF-MIP has better water dispersion ability and detection accuracy. Under optimal conditions, the linear range of oxytetracycline detection is 10-100 μmol L-1, and the minimum limit of detection (LOD) is 86 nmol L-1. This paper proposes a novel approach to use amphiphilic block copolymers as molecularly imprinted monomers on MOFs, providing an innovative idea that has not been previously explored.

Recent advances on surface mounted metal-organic frameworks for energy storage and conversion applications: Trends, challenges, and opportunities

Establishing green and reliable energy resources is very important to counteract the carbon footprints and negative impact of non-renewable energy resources. Metal-organic frameworks (MOFs) are a class of porous material finding numerous applications due to their exceptional qualities, such as high surface area, low density, superior structural flexibility, and stability. Recently, increased attention has been paid to surface mounted MOFs (SURMOFs), which is nothing but thin film of MOF, as a new category in nanotechnology having unique properties compared to bulk MOFs. With the advancement of material growth and synthesis technologies, the fine tunability of film thickness, consistency, size, and geometry with a wide range of MOF complexes is possible. In this review, we recapitulate various synthesis approaches of SURMOFs including epitaxial synthesis approach, direct solvothermal method, Langmuir-Blodgett LBL deposition, Inkjet printing technique and others and then correlated the synthesis-structure-property relationship in terms of energy storage and conversion applications. Further the critical assessment and current problems of SURMOFs have been briefly discussed to explore the future opportunities in SURMOFs for energy storage and conversion applications.

Recent advances in the tuning of the organic framework materials - The selections of ligands, reaction conditions, and post-synthesis approaches

Organic framework materials, particularly metal-organic frameworks (MOFs), graphene-organic frameworks (GOFs), and covalent organic frameworks (COFs), have led to the revolution across fields including catalysts, sensors, gas capture, and biology mainly owing to their ultra-high surface area-to-volume ratio, on-demand tunable crystal structures, and unique surface properties. While the wet chemistry routes have been the predominant synthesis approach, the crystal phase, morphological parameters, and physicochemical properties of organic framework materials are largely affected by various synthesis parameters and precursors. In this work, we specifically review the influences of synthesis parameters towards crystal structures and chemical compositions of organic framework materials, including selected ligand types and lengths, reaction temperature/solvent/reactant compositions, as well as post-synthesis modification approaches. More importantly, the subsequent impacts on the general electronic, mechanical, surface chemical, and thermal properties as well as the consequent variation in performances towards catalytic, desalination, gas sensing, and gas storage applications are critically discussed. Finally, the current challenges and prospects of organic framework materials are provided.

Thin Film Growth of 3D Sr-based Metal-Organic Framework on Conductive Glass via Electrochemical Deposition

Integration of metal-organic frameworks (MOFs) as components of advanced electronic devices is at a very early phase of development and the fundamental issues related to their crystal growth on conductive substrate need to be addressed. Herein, we report on the structural characterization of a newly synthesized Sr-based MOF {[Sr(2,5-Pzdc)(H2 O)2 ] ⋅ 3 H2 O}n (1) and the uniform crystal growth of compound 1 on a conducting glass (fluorine doped tin oxide (FTO)) substrate using electrochemical deposition techniques. The Sr-based MOF 1 was synthesized by the reaction of Sr(NO3 )2 with 2,5-pyrazinedicarboxylic acid dihydrate (2,5-Pzdc) under solvothermal conditions. A single-crystal X-ray diffraction analysis revealed that 1 has a 3D structure and crystallizes in the triclinic P1 ‾ space group. In addition, the uniform crystal growth of this MOF on a conducting glass (FTO) substrate was successfully achieved using electrochemical deposition techniques. Only a handful of MOFs have been reposed to grown on conductive surfaces, which makes this study an important focal point for future research on the applications of MOF-based devices in microelectronics.

Hetero-lattice intergrown and robust MOF membranes for polyol upgrading

Metal-organic framework membranes are frequently used in gas separations, but rare in pervaporation for liquid chemical upgrading, especially for separating water from polyols, due to lack of highly compact and robust micro-architecture. Here, we report hetero-lattice intergrown membranes in which amino-MIL-101 (Cr) particles embedded into the micro-gaps of MIL-53 (Al) rod arrays after secondary growth. By means of high-resolution TEM and two-dimensional topologic simulation, the connection between these two distinct MOF lattices at molecular-level and their crystallographic geometry harmony is identified, which leads to a close-knit structure at crystal boundaries of membranes. Typically, the membrane shows a separation factor as high as 13,000 for 90/10 ethanediol/water solution in pervaporation, yields polymer-grade ethanediol, and saves ca. 32% of energy consumption vs. vacuum distillation. It has a highly robust micro-architecture, with great tolerance to high pressure, durability against ultrasonic therapy and long-term separation stability over 600 h.

Photoinduced Delamination of Metal-Organic Framework Thin Films by Spatioselective Generation of Reactive Oxygen Species

Metal-organic frameworks (MOFs) built from different building units offer functionalities going far beyond gas storage and separation. In connection with advanced applications, e.g., in optoelectronics, hierarchical MOF-on-MOF structures fabricated using sophisticated methodologies have recently become particularly attractive. Here, we demonstrate that the structural complexity of MOF-based architectures can be further increased by employing highly spatioselective photochemistry. Using a layer-by-layer, quasi-epitaxial synthesis method, we realized a photoactive MOF-on-MOF hetero-bilayer consisting of a porphyrinic bottom layer and a tetraphenylethylene (TPE)-based top layer. Illumination of the monolithic thin film with visible light in the presence of oxygen gas results in the generation of reactive oxygen species (¹O₂) in the porphyrinic bottom layer, which lead to a photocleavage of the TPE units at the internal interface. We demonstrate that this spatioselective photochemistry can be utilized to delaminate the top layers, yielding two-dimensional (2D) MOF sheets with well-defined thickness. Experiments using atomic force microscopy (AFM) demonstrate that these platelets can be transferred onto other substrates, thus opening up the possibility of fabricating planar MOF structures using photolithography.

Anisotropy in metal–organic framework thin films

Crystallite orientation dependent properties in metal–organic framework thin films.

Tunable metal–organic framework nanoarrays on carbon cloth constructed by a rational self-sacrificing template for efficient and robust oxygen evolution reactions

The morphology and electronic structure of MOF-74 nanoarrays on carbon cloth were modulated for oxygen evolution reactions with self-sacrificing templates of Co/Ni(OH)2 nanosheets.

A Metal-Organic Framework Nanosheet-Assembled Frame Film with High Permeability and Stability

The engineering of metal-organic frameworks (MOFs) into membranes and films is being investigated, to transform laboratory-synthesized MOFs into industrially viable products for a range of attractive applications. However, rational design and construction of highly permeable MOF thin films, without trade-offs in terms of structural mechanical stability, remains a significant challenge. Herein, a simple, general strategy is reported to prepare thin MOF nanosheet (NS)-assembled frame film via heteroepitaxial growth from metal hydroxide film. As the thin MOF NS-assembled film significantly enhances the permeability of mass though the film, the resultant gold nanoparticle (Au NP)@MOF film exhibits much higher catalytic efficiency than the Au NP@MOF bulk film. Meanwhile, the unique framework of the MOF NS-assembled film resists torsion and collapse, so the composite catalyst exhibits long-term stability.