Defect‐Rich High‐Entropy Oxide Nanosheets for Efficient 5‐Hydroxymethylfurfural Electrooxidation

Controllable evolution of NiOOH/Au3+ active species for the oxidation of 5-hydroxymethylfurfural

To induce the generation of active species at the metal-carrier interface, a new synthetic strategy was successfully developed to reconstruct the Ni MOF-Au via electrochemical activation. This unique configuration not only obtained high-valence NiOOH-Au3+ species, but also stably anchored the Au nanoparticles on the surface of the catalyst. As a result, nearly 99.8% FDCA yield and 100% Faraday efficiency of FDCA were achieved at the optimal potential of 1.57 V vs. RHE. Therefore, this electrochemical reconstruction provides new insights for the development of efficient catalysts in other heterogeneous catalytic reactions.

Interfacial Micro-Environment of Electrocatalysis and Its Applications for Organic Electro-Oxidation Reaction

Conventional designing principal of electrocatalyst is focused on the electronic structure tuning, on which effectively promotes the electrocatalysis. However, as a typical kind of electrode-electrolyte interface reaction, the electrocatalysis performance is also closely dependent on the electrocatalyst interfacial micro-environment (IME), including pH, reactant concentration, electric field, surface geometry structure, hydrophilicity/hydrophobicity, etc. Recently, organic electro-oxidation reaction (OEOR), which simultaneously reduces the anodic polarization potential and produces value-added chemicals, has emerged as a competitive alternative to oxygen evolution reaction, and the role IME played in OEOR is receiving great interest. Thus, this article provides a timely review on IME and its applications toward OEOR. In this review, the IME for conventional gas-involving reactions, as a contrast, is first presented, and then the recent progresses of IME toward diverse typical OEOR are summarized; especially, some representative works are thoroughly discussed. Additionally, cutting-edge analytical methods and characterization techniques are introduced to comprehensively understand the role IME played in OEOR. In the last section, perspectives and challenges of IME regulation for OEOR are shared.

Redox-active ligands enhance oxygen evolution reaction activity: Regulating the spin state of ferric ions and accelerating electron transfer

Metal-organic frameworks (MOFs) are considered as one of the most promising catalysts for oxygen evolution reaction (OER). However, only a few have introduced redox-active ligands into MOFs and explored their role in the OER process. In this work, we synthesized FeNi DHBQ/NF using the redox-active ligand 2,5-dihydroxy-1,4-benzoquinone (DHBQ), which exhibited excellent redox activity and required only 207 and 242 mV overpotentials to achieve current densities of 10 and 100 mA cm-2. Our research confirms that (i) the doping of Fe leads to the formation of Ni → O → Fe electron transfer channels in the MOFs and stronger electron transfer, attributed to the stronger d-π conjugation between the metal center and the ligand and reduced the d-orbital crystal field splitting energy of Fe3+; (ii) the rate determination step (RDS) in the OER process of the catalyst is the formation of O*, while Fe and redox-active ligands effectively regulate the adsorption energy of oxygen-containing intermediates, reducing the energy barrier of the RDS; (iii) the redox-active ligands can act as "electron reservoirs" in the electrochemical process, making Ni more readily oxidized to Ni3+ or even Ni4+ at low potentials, which is beneficial to the subsequent OER process.

Novel nano spinel-type high-entropy oxide (HEO) catalyst for hydrogen production using ethanol steam reforming

Catalyst sintering caused by high temperature operating conditions during ethanol steam reforming (ESR) is a common issue for traditional catalysts with low Tammann temperature metals. In recent years, high entropy oxides have been popular in thermal catalysis due to their special thermodynamics and kinetics characteristics, which is expected to be a suitable approach for enhancing catalyst stability. This paper first reports the application of HEO in ESR and the characterization. The results exhibited a nano structure (CoCrFeNiAl)₃O₄ HEO with a spinel-phase and was successfully synthesized by a polyol hydrothermal precipitation-calcination method. An abundance of oxygen vacancies were formed, and were further enriched in a hydrogen atmosphere as the M-O bond opened. Interestingly, its self-reorganization featured the rendered the metals spilling out of the HEO bulk phase as active species for hydrogen production during ESR, whereas the isolated metal cation randomly dissolved into the parent metal oxide cell again after the reaction instead of agglomerating over the catalyst surface. This gave the (CoCrFeNiAl)₃O₄ a large number of dispersed active sites, as well as a high thermal stability. In addition, 81% of the hydrogen yield as well as 85% of H₂ selectivity were achieved at 600 °C. This research might offer possibilities for the development of thermal catalytic hydrogen production under high temperature conditions such as steam reforming.

Killing Two Birds with One Stone: Upgrading Organic Compounds via Electrooxidation in Electricity-Input Mode and Electricity-Output Mode

The electrochemically oxidative upgrading reaction (OUR) of organic compounds has gained enormous interest over the past few years, owing to the advantages of fast reaction kinetics, high conversion efficiency and selectivity, etc., and it exhibits great potential in becoming a key element in coupling with electricity, synthesis, energy storage and transformation. On the one hand, the kinetically more favored OUR for value-added chemical generation can potentially substitute an oxygen evolution reaction (OER) and integrate with an efficient hydrogen evolution reaction (HER) or CO₂ electroreduction reaction (CO₂RR) in an electricity-input mode. On the other hand, an OUR-based cell or battery (e.g., fuel cell or Zinc-air battery) enables the cogeneration of value-added chemicals and electricity in the electricity-output mode. For both situations, multiple benefits are to be obtained. Although the OUR of organic compounds is an old and rich discipline currently enjoying a revival, unfortunately, this fascinating strategy and its integration with the HER or CO₂RR, and/or with electricity generation, are still in the laboratory stage. In this minireview, we summarize and highlight the latest progress and milestones of the OUR for the high-value-added chemical production and cogeneration of hydrogen, CO₂ conversion in an electrolyzer and/or electricity in a primary cell. We also emphasize catalyst design, mechanism identification and system configuration. Moreover, perspectives on OUR coupling with the HER or CO₂RR in an electrolyzer in the electricity-input mode, and/or the cogeneration of electricity in a primary cell in the electricity-output mode, are offered for the future development of this fascinating technology.

A Liquid-Liquid-Solid System to Manipulate the Cascade Reaction for Highly Selective Electrosynthesis of Aldehyde

Electrocatalytic synthesis of aldehydes from alcohols exhibits unique superiorities as a promising technology, in which cascade reactions are involved. However, the cascade reactions are severely limited by the low selectivity resulting from the peroxidation of aldehydes in a traditional liquid-solid system. Herein, we report a novel liquid-liquid-solid system to regulate the selectivity of benzyl alcohol electrooxidation. The selectivity of benzaldehyde increases 200-fold from 0.4 % to 80.4 % compared with the liquid-solid system at a high current density of 136 mA cm^-2 , which is the highest one up to date. In the tri-phase system, the benzaldehyde peroxidation is suppressed efficiently, with the conversion of benzaldehyde being decreased from 87.6 % to 3.8 %. The as-produced benzaldehyde can be in situ extracted to toluene phase and separated from the electrolyte to get purified benzaldehyde. This strategy provides an efficient way to efficiently enhance the selectivity of electrocatalytic cascade reactions.

Upgrading Organic Compounds through the Coupling of Electrooxidation with Hydrogen Evolution

The electrocatalytic splitting of water is recognized to be the most sustainable and clean technology for the production of hydrogen (H₂ ). Unfortunately, the efficiency is seriously restricted by the sluggish kinetics of the oxygen evolution reaction (OER) at the anode. In contrast to the OER, the electrooxidation of organic compounds (EOO) is more thermodynamically and kinetically favorable. Thus, the coupling of the EOO and hydrogen evolution reaction (HER) has emerged as an alternative route, as it can greatly improve the catalytic efficiency for the production of H₂ . Simultaneously, value-added organic compounds can be generated on the anode through electrooxidation upgrading. In this Minireview, we highlight the latest progress and milestones in coupling the EOO with the HER. Emphasis is focused on the design of the anode catalyst, understanding the reaction mechanism, and the construction of the electrolyzer. Moreover, challenges and prospects are offered relating to the future development of this emerging technology.

Theoretical Optimization of Compositions of High-Entropy Oxides for the Oxygen Evolution Reaction

High‐entropy oxides are oxides consisting of five or more metals incorporated in a single lattice, and the large composition space suggests that properties of interest can be readily optimised. For applications within catalysis, the different local atomic environments result in a distribution of binding energies for the catalytic intermediates. Using the oxygen evolution reaction on the rutile (110) surface as example, here we outline a strategy for the theoretical optimization of the composition. Density functional theory calculations performed for a limited number of sites are used to fit a model that predicts the reaction energies for all possible local atomic environments. Two reaction pathways are considered; the conventional pathway on the coordinatively unsaturated sites and an alternative pathway involving transfer of protons to a bridging oxygen. An explicit model of the surface is constructed to describe the interdependency of the two pathways and identify the composition that maximizes catalytic activity.