Photoelectrochemical Cells with a Pyridine-Anchored Bilayer Photoanode for Water Splitting

A dye-sensitized photoanode is prepared by coassembling a Ru complex photosensitizer and a Ru water oxidation catalyst (WOC) on a TiO2 substrate, in which the WOC molecules are immobilized in a layer-by-layer fashion through metal-pyridine coordination with the aid of a bifunctional anchoring and bridging molecule containing multiple pyridine groups. Under visible-light irradiation, an anodic photocurrent of around 200 μA/cm2 has been achieved with O2 and H2 being generated at the photoanode and Pt counter electrode, respectively. The pyridine anchoring strategy provides a simple method to prepare photoelectrodes for applications in photoelectrochemical cells.

Liquid metal-embraced photoactive films for artificial photosynthesis

The practical applications of solar-driven water splitting pivot on significant advances that enable scalable production of robust photoactive films. Here, we propose a proof-of-concept for fabricating robust photoactive films by a particle-implanting technique (PiP) which embeds semiconductor photoabsorbers in the liquid metal. The strong semiconductor/metal interaction enables resulting films efficient collection of photogenerated charges and superior photoactivity. A photoanode of liquid-metal embraced BiVO4 can stably operate over 120 h and retain ~ 70% of activity when scaled from 1 to 64 cm2. Furthermore, a Z-scheme photocatalyst film of liquid-metal embraced BiVO4 and Rh-doped SrTiO3 particles can drive overall water splitting under visible light, delivering an activity 2.9 times higher than that of the control film with gold support and a 110 h stability. These results demonstrate the advantages of the PiP technique in constructing robust and efficient photoactive films for artificial photosynthesis.

Phase transitions and spectral shifts: a quantum mechanical exploration of vibrational frequency in magnesium ferrite

Spinel ferrites represent an integral subset of magnetic materials, with their inherent properties largely influenced by cation occupancy and spin interaction. In this study, we present an in-depth theoretical exploration of the phase transition landscape of pure magnesium-ferrite, deploying hybrid functionals and a local Gaussian basis set to scrutinize the relaxed lattice structure, relative energy, magnetic properties, electronic characteristics, and vibrational frequencies. Our investigation reveals that the ground state of magnesium-ferrite is an open-shell system with an inverse structure. This is characterized by the complete occupancy of octahedral sites by magnesium atoms, with Iron atoms dispersed between both tetrahedral and octahedral sites. We found a relative energy difference of 0.41 eV between the antiferromagnetic ground configuration and the ferro arrangement within the inverse structure. Furthermore, our research also delved into the impact of spin rearrangement and inversion (X = 0.0, 0.5 and 1) on Raman and infrared spectra. Notably, the lattice distortion from the cubic form, apparent in the optimized structure, resonates in the IR and Raman spectra, resulting in significant splitting. The frequencies calculated in this study align well with experimental values, suggesting that the literature's current assignments warrant reevaluation in light of this new data. The results presented herein can be instrumental in detecting the phase of Mg ferrites from experimental spectra, thereby paving the way for a more profound comprehension of their properties and possible uses.

Enhanced electrocatalytic oxygen redox reactions of iron oxide nanorod films by combining oxygen vacancy formation and cobalt doping

A synergistic effect of Co-doping and vacuum-annealing on electrochemical redox reactions of iron oxide films is demonstrated in the present work. In this research, a series of defect-rich iron oxy/hydroxide nanorod arrays: α-FeOOH, Fe2O3, and FeOx nanorod thin film catalysts were synthesized via a hydrothermal approach followed by thermal and vacuum treatments. Besides, a cobalt doping process was employed to prepare the thin film of Co-doped FeOx nanorods. The morphology, crystallinity, and electrochemical activities of Co-doped oxygen-deficient FeOx (Co-FeOx/FTO) show strong correlations with metal concentration and thermal treatments. The electrochemical measurements demonstrated that the as-deposited Co-doped FeOx NR catalyst could achieve a maximum OER current of 30 mA cm-2, which was six times greater than that recorded by as-deposited Co-doped FeOOH NR catalysts (5.7 mA cm-2) at 1.65 V vs. RHE, confirming the superior electrocatalytic OER activity at the as-deposited Co-doped FeOx NR catalyst after cobalt doping. It is believed that these results are attributed to two factors: the synergistic effect of Co doping and the defect-rich nature of FeOx nanorod catalysts that are used in sustainable energy systems.

Recent Progress in Interface Engineering of Nanostructures for Photoelectrochemical Energy Harvesting Applications

With rapid and continuous consumption of nonrenewable energy, solar energy can be utilized to meet the energy requirement and mitigate environmental issues in the future. To attain a sustainable society with an energy mix predominately dependent on solar energy, photoelectrochemical (PEC) device, in which semiconductor nanostructure-based photocatalysts play important roles, is considered to be one of the most promising candidates to realize the sufficient utilization of solar energy in a low-cost, green, and environmentally friendly manner. Interface engineering of semiconductor nanostructures has been qualified in the efficient improvement of PEC performances including three basic steps, i.e., light absorption, charge transfer/separation, and surface catalytic reaction. In this review, recently developed interface engineering of semiconductor nanostructures for direct and high-efficiency conversion of sunlight into available forms (e.g., chemical fuels and electric power) are summarized in terms of their atomic constitution and morphology, electronic structure and promising potential for PEC applications. Extensive efforts toward the development of high-performance PEC applications (e.g., PEC water splitting, PEC photodetection, PEC catalysis, PEC degradation and PEC biosensors) are also presented and appraised. Last but not least, a brief summary and personal insights on the challenges and future directions in the community of next-generation PEC devices are also provided.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Efficient Bias-Free Degradation of Sulfamethazine by TiO2 Nanoneedle Arrays Photoanode and Co3O4 Photocathode System under LED-Light Irradiation

Solving high electrical-energy input for pollutants degradation is one of the core requirements for the practical application of photoelectrocatalytic (PEC) technology. Herein, we developed a self-driven dual-photoelectrode PEC system (TiO2 NNs-Co3O4) composed of a TiO2 nanoneedle arrays (TiO2 NNs) photoanode and Co3O4 photocathode for the first time. Under light-emitting-diode (LED) illumination, the bias-free TiO2 NNs-Co3O4 PEC system exhibited excellent PEC performance, with an internal bias as high as 0.19 V, achieving near complete degradation (99.62%) of sulfamethazine (SMT) with a pseudo-first-order rate constant of 0.042 min−1. The influences of solution pH, typical inorganic anions, natural organic matter, and initial SMT concentration on the PEC performance were investigated. Moreover, the main reactive oxygen species (h+, •OH, •O2−) in the dual-photoelectrode PEC system for SMT decomposition were elaborated. The practical application feasibility for efficient water purification of this unbiased PEC system was evaluated. It was proved that the TiO2 NNs photoanode provided a negative bias while the Co3O4 photocathode provided a positive bias for the photoanode, which made this system operate without external bias. This work elucidated the cooperative mechanism of photoelectrodes, providing guidance to develop a sustainable, efficient, and energy-saving PEC system for wastewater treatment.

Photoelectrochemical Water Oxidation over Novel Semiconducting Zinc-Based Metal-Thiolate Framework

Designing an efficient catalyst for a sustainable photoelectrochemical water oxidation reaction is very challenging in the context of renewable energy research. Here, we have introduced a new semiconducting porous zinc-thiolate framework via successful stitching of an "N" donor linker with a triazine-based tristhiolate secondary building unit in the overall architecture. The introduction of both linker and tristhiolate ligand synergistically modifies the architecture by making it a rigid, crystalline, three-dimensional, thermally stable, and porous framework. Our novel zinc-thiolate framework is used as an n-type semiconductor as revealed from the solid-state UV-vis DRS spectroscopic analysis, ac and dc conductivity analysis, and Mott-Schottky plot. This n-type semiconductor-based zinc-thiolate framework is utilized in the photoelectrochemical water oxidation reaction. It displayed a very high efficiency for a visible-light-driven oxygen evolution reaction (OER) in a KOH medium using standard Ag/AgCl as the reference electrode. The superiority of this material was further revealed from the low onset potential (0.822 mV vs RHE), high photocurrent density (0.204 mA cm^-2), good stability, and high O₂ evolution rate (77 μmol g^-1 of oxygen evolution within 2 h), and a good efficiency (ABPE 0.42%, IPCE 29.6% and APCE 34.5%). Furthermore, the porosity in the overall framework seems to be a blessing to the photoelectrochemical performance due to better mass diffusion of the electrolyte. A detailed mechanism for the OER reaction was analyzed through density functional theory analysis suggesting the potential future of this Zn-thiolate framework for achieving a high efficiency in the sustainable water oxidation reaction.

Novel Two-Step Process in Cellulose Depolymerization: Hematite-Mediated Photocatalysis by Lytic Polysaccharide Monooxygenase and Fenton Reaction

To transform cellulose from biomass into fermentable sugars for biofuel production requires efficient enzymatic degradation of cellulosic feedstocks. The recently discovered family of oxidative enzymes, lytic polysaccharide monooxygenase (LPMO), has a high potential for industrial biorefinery, but its energy efficiency and scalability still have room for improvement. Hematite (α-Fe₂O₃) can act as a photocatalyst by providing electrons to LPMO-catalyzed reactions, is low cost, and is found abundantly on the Earth's surface. Here, we designed a composite enzymatic photocatalysis-Fenton reaction system based on nano-α-Fe₂O₃. The feasibility of using α-Fe₂O₃ nanoparticles as a composite catalyst to facilitate LPMO-catalyzed cellulose oxidative degradation in water was tested. Furthermore, a light-induced Fenton reaction was integrated to increase the liquefaction yield of cellulose. The innovative approach finalized the cellulose degradation process with a total liquefaction yield of 93%. Nevertheless, the complex chemical reactions and products involved in this system require further investigation.

Self-Assembled Silver Nanoparticles Decorated on Exfoliated Graphitic Carbon Nitride/Carbon Sphere Nanocomposites as a Novel Catalyst for Catalytic Reduction of Cr(VI) to Cr(III) from Wastewater and Reuse for Photocatalytic Applications

Silver nanoparticles decorated on an exfoliated graphitic carbon nitride/carbon sphere (AgNP/Eg-C₃N₄/CS) nanocomposites were synthesized by an adsorption method with a self-assembled process. These nanoparticles were characterized by different techniques like UV-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), Raman spectroscopy, scanning electron spectroscopy (SEM), transmission electron spectroscopy (TEM), electrochemical impedance spectroscopy (EIS), and ζ potential. AgNP/Eg-C₃N₄/CS nanocomposites showed a higher catalytic reduction activity for the conversion of Cr(VI) into Cr(III) with formic acid (FA) at 45 °C when compared to bulk graphitic carbon nitride (Bg-C₃N₄, Eg-C₃N₄, CS, and Eg-C₃N₄/CS). The kinetic rate constants were determined as a function of catalyst dosage, concentration of Cr(VI), pH, and temperature for the AgNP/Eg-C₃N₄/CS nanocomposite. This material showed higher reduction efficiency (98.5%, k = 0.0621 min^-1) with turnover frequency (0.0158 min^-1) for the reduction of Cr(VI) to Cr(III). It also showed great selectivity and high stability after six repeated cycles (98.5%). Further, the reusability of the Cr(III)-AgNP/Eg-C₃N₄/CS nanocomposite was also investigated for the photocatalytic degradation of methylene blue (MB) under visible light irradiation with various time intervals and it showed good degradation efficiency (α = 97.95%). From these results, the AgNP/Eg-C₃N₄/CS nanocomposite demonstrated higher catalytic activity, improved environmental friendliness, lower cost for the conversion of toxic Cr(VI) to Cr(III) in solutions, and also good reusability.

Cd-Doped Polyoxotitanium Nanoclusters with a Modifiable Organic Shell for Photoelectrochemical Water Splitting

Incorporating heterometal and chromogenic groups into the titanium oxo cluster (TOC) nanomaterials is one of the effective strategies for the development of new high-performance photoelectrically active materials. In this Article, we report the structures and photoelectrochemical (PEC) performances of a family of TOCs, including pure [Ti₁₂O₈(OEt)₁₆L₈] ({Me-Ti₁₂}) and six Cd-doped clusters formulated as [H₄Cd₂Ti₁₀O₈(OEt)₁₆(L)₈(H₂O)₂] ({Cd₂Ti₁₀}; L = salicylic acid and their derivatives). The six Cd-doped clusters are isostructural, containing the same {Cd₂Ti₁₀O₈} core, but are protected by salicylic ligands modified with different functional groups. The compositions, structures, and solution stability of these clusters have been studied in detail by single-crystal X-ray diffraction and electrospray ionization mass spectrometry measurements. The embedding of heterometallic Cd(II) and chemical modification of organic protective shells can effectively regulate the PEC water oxidation activity of those clusters, with {F-Cd₂Ti₁₀} having the highest turnover number of 518.55 and the highest turnover frequency of 172.85 h^-1. Our work highlights the potential of using TOCs that do not contain noble metals as water oxidation catalysts, and their catalytic activity can be regulated by structural modification.

Fabrication and Characterization of Co-Doped Fe2O3 Spindles for the Enhanced Photo-Fenton Catalytic Degradation of Tetracycline

Co-doped Fe2O3 spindles with different Co contents were successfully fabricated by a facile one-step hydrothermal method. The crystalline structure, morphology, optical properties, and chemical state of the as-prepared catalysts before and after photo-Fenton reaction were characterized. Co2+ incorporated into the Fe2O3 lattice was confirmed by the above characterizations. Also, the photocatalytic and photo-Fenton catalytic performances of the samples were evaluated by the degradation of tetracycline (TC) under visible light irradiation in the absence/presence of H2O2. The results demonstrated that Co-doped Fe2O3 spindles exhibited better catalytic degradation performance in comparison with single Fe2O3 spindles, and the sample of Co(5%)-Fe2O3 spindles displayed the highest activity and best stability. The improvement of photo-Fenton activity might be attributed to two reasons: On the one hand, Co-doped Fe2O3 spindles not only formed the Fe vacancies to reduce the band gap but also could build up an internal electric field, which inhibits electron/hole pair recombination and facilitates the transfer of photoexcited charge carriers. On the other hand, the intrinsic Co2+/Co3+ redox cycling can accelerate the circulation between Fe2+ and Fe3+ in Co(5%)-Fe2O3 spindles to facilitate H2O2 consumption and produce more ·OH radicals for TC degradation.

Nanoarray Structures for Artificial Photosynthesis

Conversion and storage of solar energy into fuels and chemicals by artificial photosynthesis has been considered as one of the promising methods to address the global energy crisis. However, it is still far from the practical applications on a large scale. Nanoarray structures that combine the advantages of nanosize and array alignment have demonstrated great potential to improve solar energy conversion efficiency, stability, and selectivity. This article provides a comprehensive review on the utilization of nanoarray structures in artificial photosynthesis of renewable fuels and high value-added chemicals. First, basic principles of solar energy conversion and superiorities of using nanoarray structures in this field are described. Recent research progress on nanoarray structures in both abiotic and abiotic-biotic hybrid systems is then outlined, highlighting contributions to light absorption, charge transport and transfer, and catalytic reactions (including kinetics and selectivity). Finally, conclusions and outlooks on future research directions of nanoarray structures for artificial photosynthesis are presented.

Oxygen vacancy induced peroxymonosulfate activation by Mg-doped Fe2O3 composites for advanced oxidation of organic pollutants

Oxygen vacancy engineering has emerged as an effective approach to improve the performance of catalysts for peroxymonosulfate (PMS) activation. Herein, we report a facile precipitation method followed by calcination to synthesize cost-effective and environmentally friendly magnesium-doped hematite (Mg/Fe₂O₃) composites. Multiple characterization results reveal that the incorporation of Mg can significantly increase the oxygen vacancies and specific surface area of 5%Mg/Fe₂O₃, leading to a significantly enhanced performance in degrading Rhodamine B (RhB) through PMS activation. In a typical reaction, almost complete RhB (10 mg/L) removal can be achieved by the activation of PMS (0.2 g/L) using 5%Mg/Fe₂O₃ (0.5 g/L). Moreover, the as-synthesized catalyst exhibits a broad pH working range (3.96-10.69), high stability, and recyclability. The effects of several parameters (e.g., catalyst amount, PMS dosage, solution pH and temperature, and coexisting inorganic anions) on the removal of RhB in the 5%Mg/Fe₂O₃/PMS system are investigated. A plausible PMS activation mechanism is proposed, and ¹O₂ and O₂^- are identified as the predominant reactive species in RhB degradation instead of SO₄^- and OH. This study provides new insights into the development of highly efficient iron-based catalysts and highlights their potential applications in environmental purification.

Modification of Ti-doped Hematite Photoanode with Quasi-molecular Cocatalyst: A Comparison of Improvement Mechanism Between Non-noble and Noble Metals

Loading of molecular catalyst on the surface of semiconductors is an attractive way to boost the water oxidation activity. As active sites, molecular water oxidation cocatalysts show increasing attraction and application possibility. In order to compare the advantages between molecular catalysts with non-noble and noble metals, the loading of the Fe(salen) and Ru(salen) as cocatalyst precursors on the surface of Ti-Fe₂ O₃ was investigated Quasi-Fe(salen) and Ru(salen) improved the photocurrent density by 1.5 and 1.7 times compared to that of the original Ti-Fe₂ O₃ photoanode, respectively. The quasi-Fe(salen) could improve the conductivity and reaction kinetics on the photoanode surface. By contrast, the notable advancements could be attributed to more reaction sites for quasi-Ru(salen) as cocatalysts. Thus, non-noble quasi-Fe(salen) is a promising cocatalyst to replace the noble metal salen, and further optimization can be expected with regard to the precise control of reaction sites.

Crystal Growth and Design of Disk/Filament ZnO-Decorated 1D TiO2 Composite Ceramics for Photoexcited Device Applications

Disk- and filament-like ZnO crystals were decorated on one-dimensional TiO2 nanostructures (TiO2-ZnO) through various integrated physical and chemical synthesis methods. The morphology of the ZnO crystals on TiO2 varied with the chemical synthesis method used. ZnO nanodisks decorated with TiO2 nanorods (TiO2-ZnO-C) were synthesized using the chemical bath deposition method, and ZnO filament-like crystals decorated with TiO2 nanorods (TiO2-ZnO-H) were synthesized through the hydrothermal method. Compared with the pristine TiO2 nanorods, the as-synthesized TiO2-ZnO composites exhibited enhanced photophysiochemical performance. Furthermore, because of their fast electron transportation and abundant surface active sites, the ZnO nanodisks in the TiO2-ZnO-C composite exhibited a higher photoactivity than those in the TiO2-ZnO-H composite. The morphology and crystal quality of the ZnO decoration layer were manipulated using different synthesis methods to realize disk- or filament-like ZnO-decorated TiO2 composites with various photoactive performance levels.

A High-Efficiency Hematite Photoanode with Enhanced Bonding Energy Around Fe Atoms

Hematite nanoarrays are important photoanode materials. However, they suffer from serious problems of charge transfer and surface states; in particular, the surface states hinder the increase in photocurrent. A previous strategy to suppress the surface state is the deposition of an Fe-free metal oxide overlayer. Herein, from the viewpoint of atomic bonding energy, it is found that the strength of bonding around Fe atoms in the hematite is the key to suppressing the surface states. By treating the surface of hematite with Se and NaBH₄ , the Fe₂ O₃ transforms to a double-layer nanostructure. In the outer layer, the Fe-O bonding is reinforced and the Fe-Se bonding is even stronger. Therefore, the surface states are inhibited and the increase in the photocurrent density becomes much faster. Besides, the treatment constructs a nanoscale p-n junction to promote the charge transfer. Improvements are achieved in onset potential (0.25 V shift) and in photocurrent density (5.8 times). This work pinpoints the key to suppressing the surface states and preparing a high-efficiency hematite nanoarray, and deepens our understanding of hematite photoanodes.

Solvothermal phase change induced morphology transformation in CdS/CoFe2O4@Fe2O3 hierarchical nanosphere arrays as ternary heterojunction photoanodes for solar water splitting

The design of efficient heterojunction photoanodes with appropriate band alignment and ease of charge separation has been one of the most highly focused research areas in photoelectrodes.

Visible Light-Driven Photoelectrocatalytic Water Splitting Using Z-Scheme Ag-Decorated MoS2/RGO/NiWO4 Heterostructure

Herein, we have successfully constructed a solid-state Z-scheme photosystem with enhanced light absorption capacity by combining the optoelectrical properties of AgNPs with those of the MoS2/RGO/NiWO4 (Ag-MRGON) heterostructure. The Ag-MRGON Z-scheme system demonstrates improved photo-electrochemical (PEC) water-splitting performance in terms of applied bias photon-to-current conversion efficiency (ABPE), which is 0.52%, and 17.3- and 4.3-times better than those of pristine MoS2 and MoS2/NiWO4 photoanodes, respectively. The application of AgNPs as an optical property enhancer and RGO as an electron mediator improved the photocurrent density of Ag-MRGON to 3.5 mA/cm2 and suppressed the charge recombination to attain the photostability of ∼2 h. Moreover, the photocurrent onset potential of the Ag-MRGON heterojunction (i.e., 0.61 VRHE) is cathodically shifted compared to those of NiWO4 (0.83 VRHE), MoS2 (0.80 VRHE), and MoS2/NiWO4 heterojunction (0.73 VRHE). The improved PEC water-splitting performance in terms of ABPE, photocurrent density, and onset potential is attributed to the facilitated charge transfer through the RGO mediator, the plasmonic effect of AgNPs, and the proper energy band alignments with the thermodynamic potentials of hydrogen and oxygen evolution.

Efficient Photoelectrochemical Water Splitting by Tailoring MoS2/CoTe Heterojunction in a Photoelectrochemical Cell

Solar energy conversion through photoelectrochemical water splitting (PEC) is an upcoming promising technique. MoS2/CoTe heterostructures were successfully prepared and utilized for PEC studies. MoS2 and CoTe were prepared by a hydrothermal method which were then ultrasonicated with wt. % ratios of 1:3, 1:1 and 3:1 to prepare MoS2/CoTe (1:3), MoS2/CoTe (1:1) and MoS2/CoTe (3:1) heterostructure, respectively. The pure materials and heterostructures were characterized by XRD, UV-vis-DRS, SEM, XPS, PL and Raman spectroscopy. Photoelectrochemical measurements were carried out by linear sweep voltammetry and electrochemical impedance spectroscopic measurements. A maximum photocurrent density of 2.791 mA/cm2 was observed for the MoS2/CoTe (1:1) heterojunction which is about 11 times higher than the pristine MoS2. This current density was obtained at an applied bias of 0.62 V vs. Ag/AgCl (1.23 V vs. RHE) under the light intensity of 100 mW/cm2 of AM 1.5G illumination. The enhanced photocurrent density may be attributed to the efficient electron-hole pair separation. The solar to hydrogen conversion efficiency was found to be 0.84% for 1:1 MoS2/CoTe, signifying the efficient formation of the p-n junction. This study offers a novel heterojunction photocatalyst, for PEC water splitting.

Self-supported CdSe nanowire/nanosheet photoanodes on cadmium foil via in situ hydrothermal transformation of CdSe(en)0.5 complex nanostructures

To solve energy crisis, the engineering of highly efficient and cost-effective photoanodes is urgently required for clean fuel generation. Herein, CdSe(en)_0.5 (en = ethylenediamine) hybrid photoanodes were synthesized by a solvothermal approach. It was revealed that a second in situ hydrothermal treatment successfully converts cadmium foil-based inorganic-organic CdSe(en)_0.5 (en = ethylenediamine) hybrid nanosheets to an oriented cadmium hydroxide crowned CdSe nanowire-decorated porous nanosheet (Cd(OH)₂/CdSe NW/NS) heterostructure by dissolution and regrowth mechanisms. The alteration in second hydrothermal reaction conditions could modify the morphology and optical properties of the Cd(OH)₂/CdSe NW/NS heterostructure photoanodes. The possible growth mechanism of the Cd(OH)₂/CdSe NW/NS porous structure is studied at various second hydrothermal times using the control experiments of the synthesis. The optimized 3D porous Cd(OH)₂/CdSe NW/NS photoanodes exhibited an outstanding photocurrent density of 6.1 mA cm^-2 at 0 V vs. Ag/AgCl, which is approximately 7.6 times higher than that of the inorganic-organic CdSe(en)_0.5 hybrid under light irradiation (>420 nm cut off filter). A mechanism is proposed to explain the enhanced charge separation at the Cd(OH)₂/CdSe NW/NS photoanode/electrolyte interface, which is supported by PL and photoelectrochemical analyses. These findings open an avenue of phase and morphology transmutation for efficient formation of other hierarchical structures of metal selenides and sulfides. Additionally, the Al₂O₃ co-catalyst can act as effective hole trapping sites and improves the stability of the photoelectrode through the timely consumption of photogenerated charges, particularly holes.

Tunable surface modification of a hematite photoanode by a Co(salen)-based cocatalyst for boosting photoelectrochemical performance

A water splitting photoanode composed of hematite (α-Fe₂O₃) nanorods modified with Co(salen) was proven to exhibit special photoelectrochemical oxygen evolution activity.

Current progress in developing metal oxide nanoarrays-based photoanodes for photoelectrochemical water splitting

Solar energy driven photoelectrochemical (PEC) water splitting is a clean and powerful approach for renewable hydrogen production. The design and construction of metal oxide based nanoarray photoanodes is one of the promising strategies to make the continuous breakthroughs in solar to hydrogen conversion efficiency of PEC cells owing to their owned several advantages including enhanced reactive surface at the electrode/electrolyte interface, improved light absorption capability, increased charge separation efficiency and direct electron transport pathways. In this Review, we first introduce the structure, work principle and their relevant efficiency calculations of a PEC cell. We then give a summary of the state-of the-art research in the preparation strategies and growth mechanism for the metal oxide based nanoarrays, and some details about the performances of metal oxide based nanoarray photoanodes for PEC water splitting. Finally, we discuss key aspects which should be addressed in continued work on realizing high-efficiency metal oxide based nanoarray photoanodes for PEC solar water splitting systems.

A Self-Assembled Organic/Metal Junction for Water Photo-Oxidation

We report the in situ self-assembly of TTF, TTF^•+, and BF₄^- or PF₆^- into p-type semiconductors on the surface of Pt microparticles dispersed in water/acetonitrile mixtures. The visible light photoactivation of these self-assemblies leads to water oxidation forming O₂ and H⁺, with an efficiency of 100% with respect to the initial concentration of TTF^•+. TTF^•+ is then completely reduced to TTF upon photoreduction with water. The Pt microparticles act as floating microelectrodes whose Fermi level is imposed by the different redox species in solution; here predominantly TTF, TTF^•+, and HTTF⁺, which furthermore showed no signs of decomposition in solution.

Progress on ternary oxide-based photoanodes for use in photoelectrochemical cells for solar water splitting

Solar water splitting using photoelectrochemical cells (PECs) has emerged as one of the most promising routes to produce hydrogen as a clean and renewable fuel source. Among various semiconductors that have been considered as photoelectrodes for use in PECs, oxide-based photoanodes are particularly attractive because of their stability in aqueous media in addition to inexpensive and facile processing compared to other types of semiconductors. However, they typically suffer from poor charge carrier separation and transport. In the past few years, there has been tremendous progress in developing ternary oxide-based photoelectrodes, specifically, photoanodes. The use of ternary oxides provides more opportunities to tune the composition and electronic structure of the photoelectrode compared to binary oxides, thus providing more freedom to tune the photoelectrochemical properties. In this article, we outline the important characteristics to analyze when evaluating photoanodes and review the major recent progress made on the development of ternary oxide-based photoanodes. For each system, we highlight the favorable and unfavorable features and summarize the strategies utilized to address the challenges associated with each material. Finally, by combining our analyses of all the photoanodes surveyed in this review, we provide possible future research directions for each compound and an outlook for constructing more efficient oxide-based PECs. Overall, this review will provide a critical overview of current ternary oxide-based photoanodes and will serve as a platform for the design of future oxide-based PECs.

Atomically dispersed nickel-nitrogen-sulfur species anchored on porous carbon nanosheets for efficient water oxidation

Developing low-cost electrocatalysts to replace precious Ir-based materials is key for oxygen evolution reaction (OER). Here, we report atomically dispersed nickel coordinated with nitrogen and sulfur species in porous carbon nanosheets as an electrocatalyst exhibiting excellent activity and durability for OER with a low overpotential of 1.51 V at 10 mA cm^-2 and a small Tafel slope of 45 mV dec^-1 in alkaline media. Such electrocatalyst represents the best among all reported transition metal- and/or heteroatom-doped carbon electrocatalysts and is even superior to benchmark Ir/C. Theoretical and experimental results demonstrate that the well-dispersed molecular S|NiN_x species act as active sites for catalyzing OER. The atomic structure of S|NiN_x centers in the carbon matrix is clearly disclosed by aberration-corrected scanning transmission electron microscopy and synchrotron radiation X-ray absorption spectroscopy together with computational simulations. An integrated photoanode of nanocarbon on a Fe₂O₃ nanosheet array enables highly active solar-driven oxygen production.

Cobalt-doped hematite thin films for electrocatalytic water oxidation in highly acidic media

Low-concentration cobalt doping improves the intrinsic activity and charge transport of hematite thin-film electrocatalyst for high-performance acidic water oxidation.

The facile synthesis and enhanced photocatalytic activity of a graphitic carbon nitride isotype heterojunction with ordered mesopores

In order to improve the photocatalytic activity of graphitic carbon nitride, we prepared a g-C₃N₄ isotype heterojunction with ordered mesopores through simple one-step calcination.

Boosting electrocatalytic N2 reduction by MnO2 with oxygen vacancies

MnO₂ with oxygen vacancies nanoarray on Ti mesh (MnO_x/TM) is active for N₂-to-NH₃ conversion, achieving a large NH₃ yield of 1.63 × 10⁻¹⁰ mol cm⁻² s⁻¹ and a high Faradaic efficiency of 11.40% in 0.1 M Na₂SO₄.

Aqueous Dual-Ion Battery Based on a Hematite Anode with Exposed {1 0 4} Facets

The aqueous rechargeable lithium battery (ARLB) is one of the most promising devices for large-scale grid applications. Currently, a key issue for ARLBs is to develop promising anode materials with favorable electrochemical performances. Here, for the first time, we demonstrate an aqueous battery that utilizes the reversible redox reaction with hydroxide ions (OH^- ) in the hematite (Fe₂ O₃ ) anode and a commercial Li ion intercalation compound in neutral solution as the cathode. The fabricated aqueous battery displays a reversible capacity of 92 mAh g^-1 . The morphology of the used Fe₂ O₃ anode with exposed {1 0 4} facets for this aqueous battery is unique and attractive. Importantly, with the dual-pH neutral-alkaline hybrid electrolyte, many excellent anode materials that previously could only work in alkaline electrolytes can now be successfully combined with commercial cathodes in neutral solutions, which may significantly enrich the range of anode materials for ARLBs. In addition, the reported battery configuration can be extended to other aqueous batteries beyond Li-ion ones with lower cost.