Three-Dimensional Macroscopic Assemblies of Low-Dimensional Carbon Nitrides for Enhanced Hydrogen Evolution

Interlayer Potassium Single-Atom-Coordinated g-C3N4 for Significantly Boosted Visible Light Photocatalytic H2 Production

In recent years, graphitic carbon nitride (g-C3N4) has attracted considerable attention because it includes earth-abundant carbon and nitrogen elements and exhibits good chemical and thermal stability owing to the strong covalent interaction in its conjugated layer structure. However, bulk g-C3N4 has some disadvantages of low specific surface area, poor light absorption, rapid recombination of photogenerated charge carriers, and insufficient active sites, which hinder its practical applications. In this study, we design and synthesize potassium single-atom (K SAs)-doped g-C3N4 porous nanosheets (CM-KX, where X represents the mass of KHP added) via supramolecular self-assembling and chemical cross-linking copolymerization strategies. The results show that the utilization of supramolecules as precursors can produce g-C3N4 nanosheets with reduced thickness, increased surface area, and abundant mesopores. In addition, the intercalation of K atoms within the g-C3N4 nitrogen pots through the formation of K-N bonds results in the reduction of the band gap and expansion of the visible-light absorption range. The optimized K-doped CM-K12 nanosheets achieve a specific surface area of 127 m2 g-1, which is 11.4 times larger than that of the pristine g-C3N4 nanosheets. Furthermore, the optimal CM-K12 sample exhibits the maximum H2 production rate of 127.78 μmol h-1 under visible light (λ ≥ 420 nm), which is nearly 23 times higher than that of bare g-C3N4. This significant improvement of photocatalytic activity is attributed to the synergistic effects of the mesoporous structure and K SAs doping, which effectively increase the specific surface area, improve the visible-light absorption capacity, and facilitate the separation and transfer of photogenerated electron-hole pairs. Besides, the optimal sample shows good chemical stability for 20 h in the recycling experiments. Density functional theory calculations confirm that the introduction of K SAs significantly boosts the adsorption energy for water and decreases the activation energy barrier for the reduction of water to hydrogen.

Supermolecule Polymer Derived Porous Carbon Nitride Microspheres with Controllable Energy Band Structure for Photocatalytic Hydrogen Evolution Reaction

Porous graphitic carbon nitride microsphere with large specific surface area and controllable energy band structure is synthesized via a simple method with the supermolecule polymer of melamine-cyanuric acid (MCA) as the intermediates. The energy band structure and morphology of carbon nitride are closely correlative to the calcination time. And the CN-20 catalyst fabricated by calcination for 20 h exhibit superior photocatalytic activity of hydrogen evolution reaction (HER) under visible-light (λ ≥ 420 nm) irradiation. The photocatalytic and photoelectrochemical test results indicate that Pt is the optimum cocatalyst candidate compared with Pd, Ru, and Ag. Meanwhile, the time-dependent process of the intermediate pyrolysis to carbon nitride and the internal mechanism of photogenerated charge transfer between semiconductors and cocatalyst is investigated and supplemented by theoretical calculations. This work provides a novel and energy band structure controllable manufacture strategy for porous carbon nitride semiconductor with satisfying visible-light photocatalytic reduction performance.

Functionalized hydrogen-bonded organic superstructures via molecular self-assembly for enhanced uranium extraction

Effective uranium extraction from water is essential for the development of nuclear power industry and the protection of human health and environment. Nevertheless, it still remains challenging to realize efficient and cost-effective uranium extraction. Herein, a fast and simple method for the direct fabrication of novel functionalized hydrogen-bonded organic superstructures via molecular self-assembly is reported. The as-constructed flower-like superstructures (MCP-5) can allow the exposure of adsorption sites and facilitate the transport of uranyl ions, while synergism between amino and phosphate groups can realize selective uranium extraction. Consequently, MCP-5 possesses excellent uranium adsorption ability with a high saturated adsorption capacity of 950.52 mg g-1, high utilization rate of adsorption sites and adsorption equilibrium time of simply 5 min in uranium-spiked aqueous solution. Furthermore, MCP-5 offers selective uranium adsorption over a broad range of metal ions. The facile synthesis and low-cost raw materials make it have promising potential for uranium capture. Simultaneously, this study opens a design avenue of functionalized hydrogen-bonded organic material for efficient uranium extraction.

Copper-Loaded Nanoheterojunction Enables Superb Orthotopic Osteosarcoma Therapy via Oxidative Stress and Cell Cuproptosis

Catalytic tumor therapy based on two-dimensional (2D) nanomaterials is a burgeoning and promising tumor therapeutic modality. However, the inefficient utilization and conversion of exogenous stimulation, single catalytic modality, and unsatisfactory therapeutic efficiency in the tumor microenvironment (TME) have seriously restricted their further application in tumor therapy. Herein, the heterogeneous carbon nitride-based nanoagent named T-HCN@CuMS was successfully developed, which dramatically improved the efficiency of the tumor therapeutic modality. Benefiting from the donor-acceptor (triazine-heptazine) structure within the heterogeneous carbon nitride nanosheets (HCN) and the construction of interplanar heterostructure with copper loaded metallic molybdenum bisulfide nanosheets (CuMS), T-HCN@CuMS presented a favorable photo-induced catalytic property to generate abundant reactive oxygen species (ROS) under near-infrared (NIR) light irradiation. Besides, the choice of CuMS simultaneously enabled this nanoagent to efficiently catalyze the Fenton-like reaction and trigger cell cuproptosis, a recently recognized regulated cell death mode characterized by imbalanced intracellular copper homeostasis and aggregation of lipoylated mitochondrial proteins. Moreover, upon surface modification with cRGDfk-PEG2k-DSPE, T-HCN@CuMS was prepared and endowed with improved dispersibility and αvβ3 integrins targeting ability. In general, through the rational design, T-HCN@CuMS was facilely prepared and had achieved satisfactory antitumor and antimetastasis outcomes both in vitro and in a high-metastatic orthotopic osteosarcoma model. This strategy could offer an idea to treat malignant diseases based on 2D nanomaterials.

In-Plane Palladium and Interplanar Copper Dual Single-Atom Catalyst in Bulk-Like Carbon Nitride for Cascade CO2 Photoreduction

Dual single-atom catalysts (DSACs) are promising for breaking the scaling relationships and ensuring synergistic effects compared with conventional single-atom catalysts (SACs). Nevertheless, precise synthesis and optimization of DSACs with specific locations and functions remain challenging. Herein, dual single-atoms are specifically incorporated into the layer-stacked bulk-like carbon nitride, featuring in-plane three-coordinated Pd and interplanar four-coordinated Cu (Pd1 -Cu1 /b-CN) atomic sites, from both experimental results and DFT simulations. Using femtosecond time-resolved transient absorption (fs-TA) spectroscopy, it is found that the in-plane Pd features a charge decay lifetime of 95.6 ps which is much longer than that of the interplanar Cu (3.07 ps). This finding indicates that the in-plane Pd can provide electrons for the reaction as the catalytically active site in both structurally and dynamically favorable manners. Such a well-defined bi-functional cascade system ensures a 3.47-fold increase in CO yield compared to that of bulk-like CN (b-CN), while also exceeding the effects of single Pd1 /b-CN and Cu1 /b-CN sites. Furthermore, DFT calculations reveal that the inherent transformation from s-p coupling to d-p hybridization between the Pd site and CO2 molecule occurs during the initial CO2 adsorption and hydrogenation processes and stimulates the preferred CO2 -to-CO reaction pathway.

Highly Efficient and Robust Full-Color Organic Afterglow through 2D Superlattices Embedment

Purely organic afterglow (POA) originating from the slow radiative decay of stabilized triplet excited states has shown amazing potential in many fields. However, achieving highly stable POA with high phosphorescent quantum yield (PhQY) and long lifetime is still a formidable challenge owing to the intrinsically active and sensitive nature of triplet excitons. Here, triplet excitons of phosphors are protected and stabilized by embedding in tricomponent trihapto self-assembled 2D hydrogen-bonded superlattices, which not only enables deep-blue POA with high PhQY (up to 65%), ultralong lifetime (over 1300 ms) and the highest figure-of-merit at room temperature, but also achieves excellent stability capable of resisting quenching effects of oxygen, solvent, pressure, light, and heat. In addition, the POA color is tuned from deep-blue to red via efficient Förster resonance energy transfer from the deep-blue POA emitters to the fluorophores. Moreover, with the high-performance, robust, and full-color POA materials, flexible anti-counterfeit displays and direct-current (DC)-driven lifetime-encrypted color Morse Code applications are facilely realized.

Template-based textural modifications of polymeric graphitic carbon nitrides towards waste water treatment

The composite materials based on graphitic carbon nitrides (g-C₃N₄) are remarkably better semiconductors, but the inherent photocatalytic performance in its generic synthesis form is not up to the mark. Eminence efforts have been made to improve its performance and photocatalytic efficiencies. Recently, extensive investigations have been performed to develop their texturally modified and highly porous structures to get around the big flaws of bulk g-C₃N₄. One significant disadvantage is the increase in the polycondensation while preparation at 550 °C results in g-C₃N₄ materials with restricted specific surface area (SSA) (<10 m²/g) and no textured pores. Textural modification has emerged as an efficient and progressive way to improve optical and electronic characteristics. The final texture and shape of CN are influenced by the precursor's interaction with the template. Researchers are interested in developing CN materials with high SSA and changeable textural properties (pore volume and pore size). Based on the literature review it is concluded that the soft templating approach is relatively simple, and straightforward to induce textural changes in the g-CN type materials. This review focused on improving the textural properties of bulk g-C₃N₄ via templating method, and the major advances in the modified g-C₃N₄ materials for the treatment of wastewater. The procedures and mechanisms of numerous approaches with varying morphologies are thoroughly explained.

Cobalt Single Atoms Anchored on Oxygen-Doped Tubular Carbon Nitride for Efficient Peroxymonosulfate Activation: Simultaneous Coordination Structure and Morphology Modulation

Simultaneous regulation of the coordination environment of single-atom catalysts (SACs) and engineering architectures with efficient exposed active sites are efficient strategies for boosting peroxymonosulfate (PMS) activation. We isolated cobalt atoms with dual nitrogen and oxygen coordination (Co-N₃ O₁ ) on oxygen-doped tubular carbon nitride (TCN) by pyrolyzing a hydrogen-bonded cyanuric acid melamine-cobalt acetate precursor. The theoretically constructed Co-N₃ O₁ moiety on TCN exhibited an impressive mass activity of 7.61×10⁵  min^-1  mol^-1 with high ¹ O₂ selectivity. Theoretical calculations revealed that the cobalt single atoms occupied a dual nitrogen and oxygen coordination environment, and that PMS adsorption was promoted and energy barriers reduced for the key *O intermediate that produced ¹ O₂ . The catalysts were attached to a widely used poly(vinylidene fluoride) microfiltration membrane to deliver an antibiotic wastewater treatment system with 97.5 % ciprofloxacin rejection over 10 hours, thereby revealing the suitability of the membrane for industrial applications.

Photocatalytic Water-Splitting by Organic Conjugated Polymers: Opportunities and Challenges

The future challenges associated with the shortage of fossil fuels and their current environmental impacts intrigued the researchers to look for alternative ways of generating green energy. Solar-driven water splitting into oxygen and hydrogen is one of those advanced strategies. Researchers have studied various semiconductor materials to achieve potential results. However, it encountered multiple challenges such as high cost, low photostability and efficiency, and required multistep modifications. The conjugated polymers (CPs) have emerged as promising alternatives for conventional inorganic semiconductors. The CPs offer low cost, sufficient light absorption efficiency, excellent photo and chemical stability, and molecular optoelectronic tunable characteristics. Furthermore, organic CPs also present higher flexibility to tune the basic framework of the backbone of the polymers, amendments in the sidechain to incorporate desired functionalities, and much-needed porosity to serve better for photocatalytic applications. This review article summarizes the recent advancements made in visible-light-driven water splitting covering the aspects of synthetic strategies and experimental parameters employed for water splitting reactions with special emphasis on conjugated polymers such as linear CPs, planarized CPs, graphitic carbon nitride (g-C₃ N₄ ), conjugated microporous polymers (CMPs), covalent organic frameworks (COFs), and conjugated polymer-based nanocomposites (CPNCs). The current challenges and future prospects have also been described briefly.

Tube wall delamination engineering induces photogenerated carrier separation to achieve photocatalytic performance improvement of tubular g-C3N4

Morphology adjustment is a feasible method to change the physicochemical properties of photocatalysts. The issue that excessively thick tube wall of tubular g-C₃N₄ is not conducive to the electron migration from inside to the surface thus inhibiting the separation of photogenerated carriers has always been ignored. Potassium ions were used to regulate the structure of the tubular supramolecular precursor by breaking hydrogen bonds, thereby promoting the synthesis of delaminated laminar tubular g-C₃N₄ (K-CN), which not only shortened the transfer distance of photogenerated electrons but also provided abundant reaction active sites. Experiments and DFT calculations were combined to reveal the details of the physicochemical properties of K-CN. The photocatalytic capacity of K-CN for tetracycline hydrochloride (TCH) degradation and H₂O₂ generation were 83% and 133 μM, respectively. This work not only synthesized a novel delaminated tubular g-C₃N₄ but also provided a strategy and inspiration for structure and performance optimization for tubular g-C₃N₄.

Greener One Step Synthesis of Novel In-situ Selenium-Doped Frameworks Photocatalyst by Melem and Perylene Dianhydride for Enhanced Solar Fuel Production from CO2

To minimize the ever-increasing global warming and environmental problems, the conversion of atmospheric CO₂ into value-added solar chemicals/fuels is one of the most challenging tasks. As a means to accomplish this, herein we have synthesized first time novel in situ selenium doped polyimide frameworks (Se-PIFs) photocatalyst via thermal co-polymerization approach between melem (M) and perylene 3, 4, 9, 10- tetracarboxylic dianhydride (PTDA) along with selenium (Se) as a dopant. The Se-PIFs photocatalyst shows outstanding photocatalytic stability and activity for high solar fuel production (HCOOH ~ formic acid) from CO₂ . The solar light active Se-PIFs photocatalyst was demonstrating the ~ 10 fold higher photo-conversion of CO₂ to formic acid with yields of 250. 6 μmol. The current work is providing a facile and scalable avenue as well as sheds light on creating a new route for in-situ judicious design highly efficient Se-PIFs photocatalyst. The outcome are a benchmark instance for the use of selenium doped polyimide frameworks as a highly practical and efficient solar light active photocatalyst for carrying out the selective production of formic acid from environmental CO₂ .

Magnetic 2D/2D oxygen doped g-C3N4/biochar composite to activate peroxymonosulfate for degradation of emerging organic pollutants

Herein, magnetic 2D/2D oxygen-doped graphite carbon nitride/ biochar (γ-Fe₂O₃/O-g-C₃N₄/BC) composite was rationally fabricated and used to activate peroxymonosulfate (PMS) for the degradation of emerging organic pollutants. O-g-C₃N₄ or coconut-derived biochar (BC) displayed low catalytic activity to PMS, while γ-Fe₂O₃/O-g-C₃N₄/BC composite showed superior catalytic activity, in which complete degradation of antibiotic sulfamethoxazole (SMX) was quickly achieved, with the mineralization ratio of 62.3%. The surface-bound reactive species (dominant) and sulfate radicals as well as hydroxyl radicals contributed to SMX degradation. Visible light could accelerate SMX degradation and enhance SMX mineralization, suggesting that γ-Fe₂O₃/O-g-C₃N₄/BC composite had good photocatalytic activity. The superior catalytic activity of γ-Fe₂O₃/O-g-C₃N₄/BC composite to activate PMS and visible light was attributed to the enhanced interfacial charge transfer and adsorption capacity. In addition to antibiotic SMX, other typical emerging organic pollutants, including atrazine, phenol, nitrobenzene and carbamazepine could also be degraded and mineralized in the system of visible light/O-g-C₃N₄/BC/PMS, indicating its wide applicability for degradation of various toxic organic pollutants in water and wastewater.

Facile preparation of a novel modified biochar-based supramolecular self-assembled g-C3N4 for enhanced visible light photocatalytic degradation of phenanthrene

The rational design of a novel and environmentally friendly photocatalytic composite for persistent pollutant removal, energy production and catalytic applications have attracted widespread interest. In this study, the new composite composed of KOH-modified biochar and g-C₃N₄ with different morphologies was successfully prepared with facile supramolecular self-assembly and thermal poly-condensation method. The characterization results of the as-prepared composites suggested that KOH-modified biochar had been well combined with g-C₃N₄ with different morphologies. These synthesized catalysts were used to degrade phenanthrene under visible light radiation. A-BC/g-C₃N₄-D performed best and removed 76.72% phenanthrene. Its first-order reaction rate constant was 0.355 h^-1, which was 3.7 times higher than that of g-C₃N₄. A-BC/g-C₃N₄-D still exhibited a high photocatalytic activity after four cycles. Radical quenching results showed that superoxide radical (·O₂^-), hydroxyl radical (·OH) and hole (h⁺) could be used as active species in the redox reaction with phenanthrene. Based on the exploration results of gas chromatography-mass spectrometer (GC-MS), a possible reaction pathway of phenanthrene degradation was also proposed. This study provides a novel strategy for fabricating various high-performance photocatalysts and the removal of persistent organic pollutants.

Recent Advances in Nanozymes for Bacteria-Infected Wound Therapy

Bacterial-infected wounds are a serious threat to public health. Bacterial invasion can easily delay the wound healing process and even cause more serious damage. Therefore, effective new methods or drugs are needed to treat wounds. Nanozyme is an artificial enzyme that mimics the activity of a natural enzyme, and a substitute for natural enzymes by mimicking the coordination environment of the catalytic site. Due to the numerous excellent properties of nanozymes, the generation of drug-resistant bacteria can be avoided while treating bacterial infection wounds by catalyzing the sterilization mechanism of generating reactive oxygen species (ROS). Notably, there are still some defects in the nanozyme antibacterial agents, and the design direction is to realize the multifunctionalization and intelligence of a single system. In this review, we first discuss the pathophysiology of bacteria infected wound healing, the formation of bacterial infection wounds, and the strategies for treating bacterially infected wounds. In addition, the antibacterial advantages and mechanism of nanozymes for bacteria-infected wounds are also described. Importantly, a series of nanomaterials based on nanozyme synthesis for the treatment of infected wounds are emphasized. Finally, the challenges and prospects of nanozymes for treating bacterial infection wounds are proposed for future research in this field.

The tremendous boost for photocatalytic properties of g-C3N4: regulation from polymerization kinetics to crystal structure engineering

Graphite carbon nitride (g-C3N4) has become research hotspot owing to its special electronic structure and excellent chemical stability. Although g-C3N4 has made great progress in the field of photocatalysis, its...

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

One-step synthesis of melamine-sponge functionalized carbon nitride for excellent water sterilization via photogenerated holes and photothermal conversion

In recent years, graphitic carbon nitride (g-C₃N₄) has been developed greatly in the domain of water treatment. We adopted one-step calcination to enhance the light absorption of g-C₃N₄ with melamine-sponge (MS). A novel form of photocatalysts (gCNMx, x  = 0.1, 0.2 and 0.3) were successfully prepared. The color of gCNMx changed with addition of MS. Experimental analysis demonstrated that C-doping and N vacancies increased the capacity of light absorption of gCNM0.2, and further increased efficiency of photothermal conversion and photogenerated holes. The sterilization efficiency of gCNM0.2 could rival a variety of metal photocatalysts. Moreover, the preparation of gCNM0.2 was cost-effective and environmental-friendly. Interestingly, the inactivation efficacy of gCNM0.2 for S. aureus depended heavily on the photogenerated holes, however, the decisive force toward S. typhimurium was photothermal conversion.

Macroscopic graphitic carbon nitride monolith for efficient hydrogen production by photocatalytic reforming of glucose under sunlight

Large particulate photocatalysts allow efficient recovery or installation into the substrate, while limiting possible light-catalyst interaction or mass/charge-transfer. In this study, we developed monodisperse organic single-crystal monoliths with controllable dimensions in the range of 10-100 μm. These were prepared on a 10-g scale by a solution-processed molecular cooperative assembly between melamine (M) and trithiocyanuric acid (TCA) and then transformed into the corresponding g-CN (MTCA-CN) by thermal polycondensation. Molecular precursors that are tightly bound in the crystal undergo polycondensation without losing their macroscopic properties depending on the dimensions of MTCA, thereby changing the microstructure, electronic structure, and photocatalytic activity. Such dimensional tunability enables the fulfillment of various catalytic requirements such as particle size, light absorption, charge separation, band edge potential, and mass transfer. As a proof-of-concept, it was shown that MTCA-CN is tailored to have a high rate of evolution of hydrogen (3.19 μmol/h) from glucose via photoreforming under AM1.5G by using MTCA-100 crystals, leading to the formation of g-CN with the more positive highest occupied molecular orbital (HOMO) level. This study highlights the possibility of developing photocatalysts for practical use and obtaining value-added products (VAPs) without losing the photocatalytic activity relevant for wastewater treatment.

Colorimetric determination of phenolic compounds using peroxidase mimics based on biomolecule-free hybrid nanoflowers consisting of graphitic carbon nitride and copper

Hybrid nanoflowers consisting of graphitic carbon nitride (GCN) and copper were successfully constructed without the involvement of any biomolecule, by simply mixing them at room temperature to induce proper self-assembly to achieve a flower-like morphology. The resulting biomolecule-free GCN-copper hybrid nanoflowers (GCN-Cu NFs) exhibited an apparent peroxidase-mimicking activity, possibly owing to the synergistic effect from the coordination of GCN and copper, as well as their large surface area, which increased the number of catalytic reaction sites. The peroxidase-mimicking GCN-Cu NFs were then employed in the colorimetric determination of selected phenolic compounds hydroquinone (HQ), methylhydroquinone (MHQ), and catechol (CC). For samples without phenolic compounds, GCN-Cu NFs catalyzed the oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂, producing an intense blue color signal. Conversely, in the presence of phenolic compounds, the oxidation of TMB was inhibited, resulting in a significant reduction of the color signal. Using this strategy, HQ, MHQ, and CC were selectively and sensitively determined in a linear range up to 100 μM with detection limits down to 0.82, 0.27, and 0.36 μM, respectively. The practical utility of this assay system was also validated by using it to detect phenolic compounds spiked in tap water, yielding a good recovery of 97.1-108.9% and coefficient of variation below 3.0%, demonstrating the excellent reliability and reproducibility of this strategy. Colorimetric determination of phenolic compounds using peroxidase mimics based on biomolecule-free hybrid nanoflowers consisting of graphitic carbon nitride and copper.

Urea-induced supramolecular self-assembly strategy to synthesize wrinkled porous carbon nitride nanosheets for highly-efficient visible-light photocatalytic degradation

Graphitic carbon nitride (g-C₃N₄) has attracted immense interest as a promising photocatalyst. To facilitate its versatile applications in many fields, new low-cost strategies to synthesize outstanding g-C₃N₄ need to be further developed. Although supramolecular preorganization has been considered as a promising candidate, the utilized supramolecules like melamine–cyanuric acid (MCA) are typically synthesized by expensive triazine derivatives. Herein, wrinkled porous g-C₃N₄ nanosheets were successfully fabricated by hydrothermal-annealing of supramolecular intermediate MCA synthesized by the cheap precursors dicyandiamide and urea. During the formation of MCA, urea could act as a facile agent to react with dicyandiamide to form melamine and cyanuric acid firstly and then assemble into MCA through hydrogen bonds. In addition, urea could serve as a porogen and decompose to generate bubbles for conducive formation of micro-size MCA self-templates and thus wrinkled porous g-C₃N₄ nanosheets could be obtained. The nanostructure and photocatalytic performance of g-C₃N₄ were optimized by modulating microstructures and physicochemical properties of MCA, which could be conveniently controlled by urea addition and hydrothermal duration. The obtained wrinkled porous g-C₃N₄ nanosheets exhibit highly-efficient visible-light photocatalytic degradation compared with traditional MCA-derived g-C₃N₄, which could remove 98.3% of the rhodamine B in 25 min. The superior photocatalytic activity is mainly attributed to the urea-induced larger specific surface area, better light harvesting ability, faster transfer and more advanced separation efficiency of the photogenerated electron–hole pairs. This research provides a new strategy for preparing high-performance porous g-C₃N₄ from the self-assembled supramolecule MCA synthesized by low-cost precursors.

Wrinkled porous g-C₃N₄ nanosheets were fabricated by supramolecular MCA self-templates. Due to the reactant and porogen agent urea, g-C₃N₄ could be modulated with efficient electron–hole pairs and thus superior photocatalytic degradation performance.

Visible light-activated self-powered photoelectrochemical aptasensor for ultrasensitive chloramphenicol detection based on DFT-proved Z-scheme Ag2CrO4/g-C3N4/graphene oxide

A visible light self-powered photoelectrochemical (PEC) aptasensor based on silver chromate particles, graphitic carbon nitride nanosheets and graphene oxide sheets (Ag₂CrO₄/g-C₃N₄/GO) for the ultrasensitive detection of chloramphenicol (CAP) was reported in this work. g-C₃N₄ was considered to be the fundamental photoelectric material because of its great oxidation ability of photogenerated hole as well as excellent biocompatibility and low toxicity. However, the narrow light absorption range and rapid carrier recombination rate limit the application of pure g-C₃N₄. Herein, Ag₂CrO₄ and GO as photosensitizer were introduced to improve the photoelectric properties of g-C₃N₄. The photocurrent of the developed ternary composite was about 3 times higher than that of pristine g-C₃N₄, which proves it can be used as a suitable photoelectric active material. Moreover, the mechanism of Z-scheme electron transfer path was proved by density functional theory (DFT) calculation. The fabricated PEC aptasensor exhibited high sensitivity toward CAP with a wide liner response of 0.5 pM to 50 nM and a detection limit of 0.29 pM. The specific recognition mechanism and excellent sensing performance indicated this aptasensor could serve as a useful tool for selective and ultrasensitive CAP detection in practical analysis.

The preparation of Al2O3/g-C3N4 composites in aluminum–water self-assembly system and its improved photocatalytic properties

The aluminum alloy is used as the aluminum source, together with melamine and cyanuric acid, in a water reaction system to obtain the precursor of Al2O3/g-C3N4 through self-assembly in one step, and then calcined to obtain the Al2O3/g-C3N4 composite photocatalytic material.

Sulfuric Acid Treated g-CN as a Precursor to Generate High-Efficient g-CN for Hydrogen Evolution from Water under Visible Light Irradiation

Modifying the physical, chemical structures of graphitic carbon nitride (g-CN) to improve its optoelectronic properties is the most efficient way to meet a high photoactivity for clean and sustainable energy production. Herein, a higher monomeric precursor for synthesizing improved micro-and electronic structure possessing g-CN was prepared by high-concentrated sulfuric acid (SA) treatment of bulk type g-CN (BCN). Several structural analyses show that after the SA treatment of BCN, the polymeric melon-based structure is torn down to cyameluric or cyanuric acid-based material. After re-polycondensation of this material as a precursor, the resulting g-CN has more condensed microstructure, carbon and oxygen contents than BCN, indicating that C, O co-doping by corrosive acid of SA. This g-CN shows a much better visible light absorption and diminished radiative charge recombination by the charge localization effect induced by heteroatoms. As a result, this condensed C, O co-doped g-CN shows the enhanced photocatalytic hydrogen evolution rate of 4.57 µmol/h from water under the visible light (>420 nm) by almost two times higher than that of BCN (2.37 µmol/h). This study highlights the enhanced photocatalytic water splitting performance as well as the provision of the higher monomeric precursor for improved g-CN.

Sulfate modified g-C3N4 with enhanced photocatalytic activity towards hydrogen evolution: the role of sulfate in photocatalysis

Sulfate modified graphitic carbon nitride (g-C₃N₄) was prepared by simple co-pyrolysis of dicyandiamide and ammonium sulfate, and shows seven times higher photocatalytic activity towards hydrogen production than pristine g-C₃N₄. The origin of its improved photocatalytic activity was comprehensively investigated, and it was found that there are two kinds of sulfate (strongly adsorbed sulfate and a weakly adsorbed one) in the modified sample, both of which play important but slightly different roles in the photocatalysis. Compared to the strongly adsorbed one, the weakly adsorbed sulfate is more beneficial for charge separation and thus promotes more electrons to participate in the photocatalytic reaction. By applying the above synthesis method, most sulfate in our best photocatalyst exists as weakly adsorbed species, which is confirmed by advanced characterization techniques as well as DFT calculations. The increased number of electrons and improved charge separation, which are induced by the weakly adsorbed sulfate, are key to boosting the photocatalytic activity of g-C₃N₄. Hence, this work provides comprehensive insights into the effect of sulfate on the photocatalytic activity of g-C₃N₄, which help in the design of more efficient photocatalysts by suitable surface modification.

Rosette-shaped graphitic carbon nitride acts as a peroxidase mimic in a wide pH range for fluorescence-based determination of glucose with glucose oxidase

Rosette-shaped graphitic carbon nitride (rosette-GCN) is described as a promising alternative to natural peroxidase for its application to fluorescence-based glucose assays. Rosette-GCN was synthesized via a rapid reaction between melamine and cyanuric acid for 10 min at 35 °C, followed by thermal calcination for 4 h. Importantly, rosette-GCN possesses a peroxidase-like activity, producing intense fluorescence from the oxidation of Amplex UltraRed in the presence of H₂O₂ over a broad pH-range of, including neutral pH; the peroxidase activity of rosette-GCN was ~ 10-fold higher than that of conventional bulk-GCN. This enhancement of peroxidase activity is presumed to occur because rosette-GCN has a significantly larger surface area and higher porosity while preserving its unique graphitic structure. Based on the high peroxidase activity of rosette-GCN along with the catalytic action of glucose oxidase (GOx), glucose was reliably determined down to 1.2 μM with a dynamic linear concentration range of 5.0 to 275.0 μM under neutral pH conditions. Practical utility of this strategy was also successfully demonstrated by determining the glucose levels in serum samples. This work highlights the advantages of GCNs synthesized via rapid methods but with unique structures for the preparation of enzyme-mimicking catalysts, thus extending their applications to the diagnostics field and other biotechnological fields. Graphical abstract.

Supramolecular Copolymerization Strategy for Realizing the Broadband White Light Luminescence Based on N-Deficient Porous Graphitic Carbon Nitride (g-C3N4)

The N-deficient porous g-C₃N₄ with broadband white light emission was constructed by supramolecular copolymerization design, which combined organic copolymers cyanuric acid and 2,4,6-triaminopyrimidine with melamine upon the mixture gas environment of (95%)N₂/(5%)H₂. Herein, we achieved great breakthrough in narrowing the band gap of g-C₃N₄ from 2.64 to 1.39 eV. Furthermore, in contrast to pristine g-C₃N₄, we demonstrated that the emission wavelengths of N-deficient porous g-C₃N₄ can be tuned from narrow blue to broadband white range, where the optimal white light coordinate position is (0.297, 0.345). The prepared N-deficient porous g-C₃N₄ overcomes the limitation of the narrow adjusting range of optical properties while using conventional g-C₃N₄ and makes it more promising for applications in solid-state displays.

How g-C3N4 Works and Is Different from TiO2 as an Environmental Photocatalyst: Mechanistic View

Graphitic carbon nitride (CN) as a popular visible light photocatalyst needs to be better understood for environmental applications. The behaviors of CN as an environmental photocatalyst were systematically studied in comparison with a well-known TiO₂ photocatalyst. The two photocatalysts exhibit different photocatalytic oxidation (PCO) behaviors and dependences on the experimental conditions (e.g., pH, Pt loading, and the kind of organic substrate and scavenger). The PCO of organic substrates was significantly enhanced by loading Pt on TiO₂ under UV light (λ > 320 nm), whereas Pt-CN exhibited a lower PCO activity than bare CN under visible light (λ > 420 nm). While the presence of Pt enhances the charge separation in both TiO₂/UV and CN/visible light systems (confirmed by transient IR absorption spectroscopic analysis), the opposite effects of Pt are ascribed to the different mechanisms of ^•OH generation in the two photocatalytic systems. The negative effect of Pt on CN is ascribed to the fact that Pt catalytically decomposes in situ-generated H₂O₂ (a main precursor of OH radical), which hinders ^•OH production. The production of OH radicals on CN is favored only at acidic pH but ¹O₂ generation is dominant in alkaline pH. The pH-dependent behaviors of reactive oxygen species generation on CN were confirmed by electron paramagnetic resonance spin trap measurements.

The effect of n–π* electronic transitions on the N2 photofixation ability of carbon self-doped honeycomb-like g-C3N4 prepared via microwave treatment

Light harvesting is an important part of the photocatalysis process.

Promoted spatial charge separation of plasmon Ag and co-catalyst Co x P decorated mesoporous g-C3N4 nanosheet assembly for unexpected solar-driven photocatalytic performance

Plasmon Ag and co-catalyst Co _x P decorated mesoporous graphite carbon nitride nanosheet assemblies have been synthesized via a template-calcination and ball milling strategy combined with photoreduction. The obtained composites are characterized by x-ray diffraction, Fourier transmission infrared spectroscopy, x-ray photoelectron spectroscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectroscopy. The results show that the sample assembly with mesoporous structure has specific surface area of 50.4 m² g^-1, pore size of 11.3 nm and pore volume of 0.21 cm³ g^-1. The Ag and Co _x P nanoparticles are decorated on the surface of graphite carbon nitride uniformly. Under solar light irradiation, the photocatalytic degradation rate of ceftazidime for the prepared sample assembly is up to ∼92%, and the photocatalytic reaction rate constant is about 10 times higher than that of bare graphite carbon nitride. Moreover, the sample assembly also exhibits a solar-driven photocatalytic hydrogen production rate of 96.66 μmol g^-1 h^-1. It can attributed to the surface plasmon resonance effect of Ag nanoparticles and Co _x P co-catalyst promoting the spatial charge separation and the mesoporous structure providing more surface active sites and favoring mass transfer. This special structure offers new insights for fabricating other high-performance photocatalysts with high spatial charge separation.

Single Atomic Cu-N2 Catalytic Sites for Highly Active and Selective Hydroxylation of Benzene to Phenol

Searching for an efficient single-atom catalyst for benzene hydroxylation to phenol is of critical importance, but it still remains a challenge. Herein, a single-atom catalyst with unique Cu-N₂ moieties (Cu₁-N₂/HCNS) was prepared and confirmed by HAADF-STEM and EXAFS. Turnover number (TON) over Cu₁-N₂/HCNS (6,935) is 3.4 times of Cu₁-N₃/HCNS (2,034) under the same reaction conditions, and both exhibit much higher phenol selectivity (close to 99%) and stability compared with Cu nanoparticles and nanoclusters. Experiments and DFT calculations reveal that atomically dispersed Cu species are active sites for benzene hydroxylation to phenol, and the Cu-N₂ is more active than Cu-N₃ owing to its much lower energy barrier concerning the activation of H₂O₂ led by its unique coordination state of local atomic structure. We envision that this work opens a new window for modulating coordination environments of single metallic atoms in catalysis design.

Co(O)x Particles in Polymeric N-Doped Carbon Nanotube Applied for Photocatalytic H2 or Electrocatalytic O2 Evolution

A new way for synthesizing porous composite with cobalt species and N-doped carbon nanotubes (NDCNTs) was reported here by using cobalt salts and melamine mixtures as precursor. The Co(O)x/NDCNTs exhibited good activity of electrocatalytic O2 production. Furthermore, after reduced by H2, the Co-NDCNTs showed strong absorption of visible light and high catalytic activity of H2 production, which is 598.5 μmol g-1 h-1 under the visible light (λ > 420 nm). The results suggested that supramolecular preorganization of melamine monomers may be a promising method of synthesizing two-dimensional N-doped carbon nanotube with Co particles in it. The morphologies should be beneficial for the charge transport and separation. This work can encourage further synthesize new efficient noble-metal-free photocatalysts or electrocatalysts.

Molecular Cooperative Assembly-Mediated Synthesis of Ultra-High-Performance Hard Carbon Anodes for Dual-Carbon Sodium Hybrid Capacitors

Although sodium hybrid capacitors (NHCs) have emerged as one of the most promising next-generation energy storage systems, further advancement is delayed primarily by the absence of high-performance battery-type anodes. Herein, we report a nature-inspired synthesis route to prepare hard carbon anodes with high capacity, rate capability, and cycle stability for dual-carbon NHCs. Shape- and size-controllable crystal aggregates of inexpensive triazine molecules are utilized as reactive templates that perform triple duties of structure-directing agent, porogen, and nitrogen source. This enables the fine control of microstructure/morphology/composition and thereby electrochemical reactions toward Na-ion. The resulting hard carbon optimized in terms of lateral size, interlayer spacing, and surface affinity of graphene-like layers achieves a specific capacity of ∼380 mAh/g after 100 cycles at a current density of 250 mA/g mainly via intercalation, the current record of hard carbons. Combined with a commercial microporous carbon fiber cathode, the full cell is able to deliver a volumetric energy density of 2.89 mWh/cm³ and a volumetric power density of 160 mW/cm³, outperforming NHCs based on inorganic Na-ion anode materials. More importantly, such performance could not only be retained for 10000 cycles (4.5 F/cm³ at 10 mA/cm³) with 0.000 028 6% loss per cycle at >97% Coulombic efficiency but also successfully transferred to flexible pouch cells without significant performance loss after 300 bending cycles or during wrapping at a 10R condition. Simple preparation of hard carbon anodes using organic crystal reactive templates, therefore, demonstrates great potential for the manufacture of high-performance flexible NHCs using only carbon electrode materials.