A signal-on photoelectrochemical aptasensor based on ferrocene labeled triple helix DNA molecular switch for detection of antibiotic amoxicillin

A sensitive signal-on photoelectrochemical aptasensor for antibiotic determination was constructed based on the energy level matching between ferrocene and CuInS2. P-type CuInS2 microflower was complexed with reduced graphene oxide (CuInS2/rGO) to get photocathode current with good photoelectric conversion efficiency and stability. Then, hairpin DNA (HP) was covalently bonded to the electrode surface. A triple helix DNA (THMS) was used as a molecular switch. After the specific recognition between target and THMS in homogeneous solution, ferrocene labeled probe (Fc-T2) was released. Finally, Fc-T2 was captured by the HP, which leaded the obvious increase of photocurrent for the energy level matching between ferrocene and CuInS2. The increase of the photocurrent signal was proportional to the concentration of target amoxicillin (AMOX), the linear range was 100 fM-100 nM with detection limit of 19.57 fM. Meanwhile, the method has been successfully applied for milk and lake water samples analysis with satisfactory results.

Highly sensitive and selective photoelectrochemical detection of bis(2-ethylhexyl)phthalate on broad-spectrum responsive and interfacial electronic interaction induced p-n BiOI/ZnO nanoarrays heterojunction

Bis(2-ethylhexyl)phthalate (DEHP), an endocrine disruptor, shows carcinogenic, teratogenic, mutagenic and estrogenic effects. It is easy to release from plastic materials and migrate to soil environment, causing serious pollution and posing a great threat to human health. In our work, a photoelectrochemical (PEC) sensing platform for DEHP detection was constructed using BiOI/ZnO nanoarrays (NRs) as the transducer species and the DEHP aptamers as the biological recognition elements. ZnO NRs with three-dimensional and large diameter area were prepared by hydrothermal method to increase the light absorption capacity. Coupling BiOI in a narrow band gap with ZnO NRs strengthened visible-light absorption, while promoting charge carrier separation and transportation. This was attributed to the generation of an internal electric field between BiOI and ZnO NRs, exhibiting obvious photocurrent response. The as-developed PEC sensing platform demonstrated great sensing performance for detection of DEHP. Furthermore, the photocurrent varied and the logarithm of DEHP concentration showed a linear relationship from 1.0 × 10-11 to 5.0 × 10-7 mol/L, and the limit of detection was estimated to be 3.8 × 10-12 mol/L. In the meantime, while evaluating its usage in real soil samples, satisfying outcomes were realized. Thus, the as-proposed PEC sensing platform provided a potential device to monitor DEHP in the environment.

MOF-derived sandwich-structured dual Z-Scheme Co9S8@ZnIn2S4/CdSe hollow nanocages heterojunction: Target-induced ultrasensitive photoelectrochemical sensing of chlorpyrifos

Exploring efficient photoactive material presents an intriguing opportunity to enhance the analytical performance of photoelectrochemical (PEC) sensor in the environmental analysis. In this work, a sandwich-structured multi-interface Co9S8@ZnIn2S4/CdSe QDs dual Z-Scheme heterojunction, derived from metal-organic framework (MOF), was synthesized as a sensing platform for chlorpyrifos detection, by integrating with enzyme-induced in situ insoluble precipitates strategy. The meticulously designed Co9S8@ZnIn2S4/CdSe QDs exhibited enhanced charge separation efficiency and was proved to be a highly effective sensing platform for the immobilization of biomolecules, attributing to the intrinsic dual Z-Scheme heterojunction and the distinctive hollow structure. The proposed PEC sensing platform combined with enzyme-induced in situ precipitate signal amplification strategy achieved superior performance for sensing of chlorpyrifos (CPF), showing in wide linear range (1.0 pg mL-1-100 ng mL-1), with a limit of detection (0.6 pg mL-1), excellent selectivity, and stability. This work offers valuable insights for the design of novel advanced photoactive materials aimed at detecting environmental pollutants with low level concentration.

Polycarboxyl ionic liquid functionalized Yb-MOFs nanoballs based dual-wavelength responsive photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA

Developing an accurate and precise approach for the simultaneous detection of ochratoxin A (OTA) and aflatoxin B1 (AFB1) is significant for food safety surveillance. Herein, a photoelectrochemical sensing platform was constructed based on polycarboxylic ionic liquid functionalized metal-organic framework integrated with gold nanoparticles (Yb-MOFs@AuNPs). Sulfhydryl functionalized hairpin DNA (hDNA) was immobilized on a Yb-MOFs@AuNPs modified glassy carbon electrode (GCE) surface through Au-S bond. After blocking residual active binding sites with BSA, gold nanoparticles-labeled AFB1 aptamer (AuNPs-Apt 1) and gold nanorods-labeled OTA aptamer (AuNRs-Apt 2) were introduced to construct a photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA. Due to the surface plasmon resonance effect and the nanometer size effect of gold nanomaterials, the photoelectrochemical aptasensor can output photocurrent responses as being excited with different wavelengths at 520 nm and 808 nm, respectively. When the AFB1 and OTA concentration in the range of 0.001-50.0 ng mL-1, a good linear relationship between the photocurrent difference (ΔI) before and after recognizing targets and the logarithm of AFB1 or OTA concentration was obtained. The detection limits for AFB1 and OTA were 0.40 pg mL-1 and 0.19 pg mL-1, respectively. AFB1 and OTA in corn samples were detected simultaneously by the photoelectrochemical aptasensor.

Dual amplification for PEC ultrasensitive aptasensing of biomarker HER-2 based on Z-scheme UiO-66/CdIn2S4 heterojunction and flower-like PtPdCu nanozyme

As an important prognostic indicator in breast cancer, human epithelial growth factor receptor-2 (HER-2) is of importance for assessing prognosis of breast cancer patients, whose accurate and facile analysis are imperative in clinical diagnosis and treatment. Herein, photoactive Z-scheme UiO-66/CdIn2S4 heterojunction was constructed by a hydrothermal method, whose optical property and photoactivity were critically investigated by a range of techniques, combined by elucidating the interfacial charge transfer mechanism. Meanwhile, PtPdCu nanoflowers (NFs) were fabricated by a simple aqueous wet-chemical method, whose peroxidase (POD)-mimicking catalytic activity was scrutinized by representative tetramethylbenzidine (TMB) oxidation in H2O2 system. Taken together, the UiO-66/CdIn2S4 based photoelectrochemical (PEC) aptasensor was established for quantitative analysis of HER-2, where the detection signals were further magnified through catalytic precipitation reaction towards 4-chloro-1-naphthol (4-CN) oxidation (assisted by the PtPdCu NFs nanozyme). The PEC aptasensor presented a broader linear range within 0.1 pg mL-1-0.1 μg mL-1 and a lower limit of detection of 0.07 pg mL-1. This work developed a new PEC aptasensor for ultrasensitive determination of HER-2, holding substantial promise for clinical diagnostics.

Synergistic effect of photoelectrochemical aptasensor based on staggered gap ZnO/BiFeO3 heterojunction coupled with cDNA-CdS sensitizer enabling ultrasensitive assay of kanamycin

Using staggered-gap ZnO/BiFeO3 heterojunction as photoactive materials and cDNA-CdS as the sensitizer for sensitive Kanamycin (KAN) detection, we have created a unique signal-off biosensing platform. The ZnO/BiFeO3 heterojunction provides active sites for aptamer loading and enhances photocurrent responsiveness. Rapid interfacial charge transfer and the separation efficiency of photo-generated carriers are enhanced by sensitization of the ternary heterojunction ZnO/BiFeO3/CdS. Signal-amplified quenching occurs when sensitizers are replaced with sterically hindered KAN. Because of the aptamer's greater affinity for KAN, the replacement of CdS causes a decrease in photocurrent response. Additionally, the weakly conductive aptamer-KAN complex causes steric hindrance, which exacerbates the photoelectrochemical signal-damping effect even more. The photoelectrochemical aptasensor exhibits excellent selectivity and stability, detecting KAN within the range of 0.00005825-0.233 μg/mL with a detection limit of 0.0466 ng/mL (S/N = 3). This work demonstrates the potential of perovskite oxides and their heterostructures for advanced photoelectrochemical biosensing applications.

Target-regulated photoactivities of CdS/Ni-MOF heterojunction with [Ru(bpy)2dppz]2+ intercalator: a bisphenol A photoelectrochemical aptasensor

Bisphenol A (BPA), an important endocrine disrupting compound, has infiltrated human daily lives through electronic devices, food containers, and children's toys. Developing of novel BPA assay methods with high sensitivity holds tremendous importance in valuing the pollution state. Here, we constructed an ultrasensitive photoelectrochemical (PEC) aptasensor for BPA determination by regulating photoactivities of CdS/Ni-based metal-organic framework (CdS/Ni-MOF) with [Ru(bpy)2dppz]2+ sensitizer. CdS/Ni-MOF spheres exhibited excellent photocatalytic performance, serving as a potential sensing platform for the construction of target recognition process. [Ru(bpy)2dppz]2+ were embedded into DNA double-stranded structure, functioning as sensitizer for modulating the signal response of the developed PEC aptasensor. The proposed PEC sensor exhibited outstanding analytical performances, including a wide linear range (0.1 to 1000.0 nM), low detection limit (0.026 nM, at 3σ/m), excellent selectivity, and high stability. This work provides a perspective for the design of ideal photosensitive materials and signal amplification strategies and extends their application in environment analysis.

Photoelectrochemical aptasensing with methylene blue filled Ni-MOFs nanocomposite by spatial confinement for microcystin-LR detection

Microcystin LR (MC-LR) is a hazardous cyanotoxin produced by cyanobacteria during freshwater eutrophication, which can cause liver cancer. Here, a photoelectrochemical (PEC) aptasensor based on methylene blue (MB)-loaded Ni-MOF composite (Ni-MOF/MB) with spatial confinement was constructed for the sensitive detection of MC-LR. Ni-MOF with two-dimensional sheet structure was prepared via a liquid-liquid interface synthesis method with environmental-friendly solvent and milder reaction conditions. Benefiting from the uniform pore size, Ni-MOF acted as reaction platform to anchor the photosensitive molecule MB. The electron donor, ascorbic acid (AA), was produced by alkaline phosphatase (ALP) loaded on DNA strand catalyzing ascorbic acid phosphate. The generated AA was absorbed by Ni-MOF/MB, thereby effectively improving the utilization of AA and avoiding the external environment interferences to enlarge the photocurrent of MB. For analysis, ALP-labeled aptamer can specifically recognize MC-LR by forming a complex to strip from aptasensor, thus leading to a  decreased photocurrent. The developed PEC aptasensor offered a linear range of 10 fM-100 pM with a detection limit of 6 fM. It was successfully employed for detecting MC-LR in farm water and fish meat, and the results were validated by ultrahigh-performance liquid chromatography-mass spectrometry. This method presents a new idea of MOF-limited domain for PEC aptasensing.

Photoelectrochemical aptasensing of lincomycin based on a AgI-carboxylated multiwalled carbon nanotubes-BiOI Z-scheme heterojunction

Lincomycin (LIN) is a common antibiotic that is widely used in animal husbandry and other fields, and the residual problem caused by its abuse has attracted widespread attention. Herein, a novel AgI-carboxylated multiwalled carbon nanotubes (cMWCNT)-BiOI Z-scheme heterojunction material was synthesized via a one-pot hydrothermal method, modified on a fluorine-doped tin oxide (FTO) electrode surface, and used for detecting LIN. The photocurrent on the AgI-cMWCNT-BiOI/FTO photoelectrode is 4.6 times that on the control AgI-BiOI/FTO photoelectrode. An amino-functionalized LIN aptamer was fixed on the AgI-cMWCNT-BiOI/FTO photoelectrode by the cross-linking reaction between chitosan and glutaraldehyde, and then Ru(NH3)63+ was electrostatically attached to the LIN aptamer to increase the photocurrent response to the LIN binding. When LIN binds competitively with Ru(NH3)63+ to the aptamer, the photocurrent signal can be quantitatively decreased. Under optimized conditions, the anodic photocurrent at 0 V vs KCl-saturated calomel electrode in 0.1 M phosphate buffer (pH 7.0) containing 0.100 M ascorbic acid was linear with the common logarithm of LIN concentration from 10.0 pM to 500 nM, with a limit of detection of 2.8 pM (S/N = 3). Satisfactory recovery results were obtained in the analysis of cow milk samples.

Triazine-based covalent-organic framework embedded with cuprous oxide as the bioplatform for photoelectrochemical aptasensing Escherichia coli

A superior photoelectrochemical (PEC) aptasensor was manufactured for the detection of Escherichia coli (E. coli) based on a hybrid of triazine-based covalent-organic framework (COF) and cuprous oxide (Cu2O). The COF synthesized using 1,3,5-tris(4-aminophenyl)-benzene (TAPB) and 1,3,5-triformylphloroglucinol (Tp) as building blocks acted as a scaffold for encapsulated Cu2O nanoparticles (denoted as Cu2O@TAPB-Tp-COF), which then was employed as the bioplatform for anchoring E. coli-targeted aptamer. Cu2O@Cu@TAPB-Tp-COF demonstrated enhanced separation of the photogenerated carriers and photoabsorption ability and boosted photoelectric conversion efficiency. The developed Cu2O@TAPB-Tp-COF-based PEC aptasensor exhibited a lower detection limit of 2.5 CFU mL-1 toward E. coli within a wider range of 10 CFU mL-1 to 1 × 104 CFU mL-1 than most of reported aptasensors for determining foodborne bacteria, together with high selectivity, good stability, and superior ability and reproducibility. The recoveries of E. coli spiked into milk and bread samples ranged within 95.3-103.6% and 96.6-102.8%, accompanying with low RSDs of 1.37-4.48% and 1.74-3.66%, respectively. The present study shows a promising alternative for the sensitive detection of foodborne bacteria from complex foodstuffs and pathogenic bacteria-polluted environment.

Label-free "signal-off" PEC aptasensor for determination of kanamycin based on 3D nanoflower-like FeIn2S4/CdS Z-scheme heterostructures

Highly photoactive 3D nanoflower-like FeIn2S4/CdS heterostructures were synthesized by hydrothermal treatment and low-temperature cation exchange. The FeIn2S4/CdS displayed 14.5 times signal amplification in contrast to FeIn2S4 alone. It was applied as a photoactive substrate to construct a label-free photoelectrochemical (PEC) aptasensor for ultrasensitive determination of kanamycin (KAN). Under the optimal conditions, the constructed PEC aptasensor displayed a wide linear range (5.0 × 10-4 ~ 5.0 × 101 ng mL-1) and a low detection limit (S/N = 3) of 40.01 fg mL-1. This study provides some constructive insights for preparation of advanced photoactive materials and exhibits great potential for quantitative determination of antibiotics in foods and environmental samples.

A highly sensitive and selective photoelectrochemical aptasensor for atrazine based on Au NPs/3DOM TiO2 photonic crystal electrode

A photoelectrochemical (PEC) sensing platform with high sensitivity and selectivity has been fabricated based on Au nanoparticles (Au NPs) modified three dimensionally ordered macroporous (3DOM) TiO₂ nanostructure frame for trace detection of an endocrine disrupting pesticide, atrazine (ATZ). The resultant photoanode (Au NPs/3DOM TiO₂) shows enhanced PEC performance under visible light due to multi signal amplification of the unique structure of 3DOM TiO₂ and surface plasmon resonance (SPR) of Au NPs. ATZ aptamers are used as recognition elements and immobilized on Au NPs/3DOM TiO₂ by Au-S bond in large packing density and dominant spatial orientation. The specific recognition and high binding affinity between aptamer and ATZ provides the PEC aptasensor with excellent sensitivity. The detection limit is 0.167 ng/L. Besides, this PEC aptasensor exhibits outstanding anti-interference ability in 100-fold concentration of other endocrine disrupting compounds and has been applied successfully to analyze ATZ in real water samples. A simple but efficient PEC aptasensing platform has therefore been successfully developed with high sensitivity, selectivity and repeatability for pollutant monitoring and potential risk evaluation in the environment with great application prospect.

Integration of CuS/ZnIn2S4 flower-like heterojunctions and (MnCo)Fe2O4 nanozyme for signal amplification and their application to ultrasensitive PEC aptasensing of cancer biomarker

Vascular endothelial growth factor 165 (VEGF₁₆₅) is a crucial regulator of angiogenesis and works as a major protein biomarker of cancer metastasis. Therefore, its quantitative detection is pivotal in clinic. In this work, CuS/ZnIn₂S₄ flower-like heterojunctions had strong and stable photocurrents, which behaved as photoactive material to construct a photoelectrochemical (PEC) aptasensor for detecting VEGF₁₆₅, combined by home-prepared (MnCo)Fe₂O₄ nanozyme-mediated signal amplification. The interfacial photo-induced electron transfer mechanism was chiefly discussed by UV-vis diffuse reflectance spectroscopy in details. Specifically, the (MnCo)Fe₂O₄ modified VEGF₁₆₅ aptamer was released from the PEC aptasensing platform for its highly specific affinity to target VEGF₁₆₅, which terminated the color precipitation reaction, ultimately recovering the PEC signals. The developed sensor displayed a wider linear range from 1 × 10^-2 to 1 × 10⁴ pg mL^-1 with a smaller limit of detection (LOD) of 0.1 fg mL^-1. This study provides some valuable insights for building other ultrasensitive aptasensors for clinical assays of cancer biomarkers in practice.

Photoelectrochemical aptasensing of oxytetracycline based on a BiVO4-carboxylated graphene-WO3 Z-scheme heterojunction

A new BiVO₄-carboxylated graphene (cG)-WO₃ Z-scheme heterojunction was constructed on a fluorine-doped tin oxide (FTO) substrate electrode by ultrasonic mixing and cast-coating for determination of oxytetracycline (OTC). Since cG can absorb visible light and well match with the energy levels of WO₃ and BiVO₄ to promote the charge separation and transfer, the photocurrent on the BiVO₄-cG-WO₃/FTO photoelectrode is 4.4 times that on the control BiVO₄-WO₃/FTO photoelectrode. An amino-functionalized OTC aptamer was fixed on the BiVO₄-cG-WO₃/FTO photoelectrode by the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide mediated amide reaction, and then hexaammonium ruthenium(III) (Ru(NH₃)₆³⁺) was attached to the OTC aptamer to increase the photocurrent response to the OTC binding. Under the optimized conditions, the photocurrent on the BiVO₄-cG-WO₃/FTO photoelectrode at 0 V vs SCE was linear with the common logarithm of OTC concentration from 0.01 nM to 500 nM, with a limit of detection of 3.1 pM (S/N = 3). Satisfactory recovery results were obtained in the analysis of real water samples.

Confinement of defect-rich bimetallic In(2)O(3)/CeO(2) nanocrystals in mesoporous nitrogen-doped carbon as a sensitive platform for photoelectrochemical aptasensing of Escherichia coli

The sensitive determination of food-borne pathogens from food products is essential to ensure food safety and to protect people's health. Herein, a novel photoelectrochemical (PEC) aptasensor was manufactured based on defect-rich bimetallic cerium/indium oxide nanocrystals confined in mesoporous nitrogen-doped carbon (denoted as In₂O₃/CeO₂@mNC) for sensitively detecting Escherichia coli (E. coli) from real samples. A new cerium-based polymer-metal-organic framework [polyMOF(Ce)] was synthesized using polyether polymer containing 1,4-benzenedicarboxylic acid unit (L8) as ligand, trimesic acid as co-ligand, and cerium ions as coordination centers. After adsorbing trace indium ions (In³⁺), the gained polyMOF(Ce)/In³⁺ complex was calcined at high temperature under nitrogen atmosphere, resulting in the production of a series of defect-rich In₂O₃/CeO₂@mNC hybrids. Benefitting from the advantages of high specific surface area, large pore size, and multiple functionality of polyMOF(Ce), In₂O₃/CeO₂@mNC hybrids showed enhanced visible light absorption ability, separation performance of the photo-generated electrons and holes, promoted electron transfer, as well as the strong bioaffinity toward E. coli-targeted aptamer. Accordingly, the constructed PEC aptasensor illustrated an ultralow detection limit of 1.12 CFU mL^-1, remarkably lower than most of the reported E. coli biosensors, along with high stability and selectivity, excellent reproducibility, and expected regeneration ability. The present work provides insight into the construction of a general PEC biosensing strategy based on MOF-based derivatives for the sensitive analysis of food-borne pathogens.

Dual II-scheme nanosheet-like Bi2S3/Bi2O3/Ag2S heterostructures for ultrasensitive PEC aptasensing of aflatoxin B1 coupled with catalytic signal amplification by dendritic nanorod-like Au@Pd@Pt nanozyme

As one of the most toxic chemical substances, aflatoxin B1 (AFB1) has a strong carcinogenic effect even at a trace level in human and animal, which severely threatens human health and even causes cancers. Therefore, ultrasensitive detection of AFB1 is of significant importance. For such analysis, dual II-scheme sheet-like Bi₂S₃/Bi₂O₃/Ag₂S heterostructures were prepared by the in-situ growth method, which exhibited high separation efficiency for the electron-hole (e^--h⁺) pairs, prominent stability, and high photoactivity. Moreover, the dendritic nanorod-like Au@Pd@Pt (Au@Pd@Pt DNRs) nanozyme was homely synthesized, whose peroxidase-like activity was scrupulously investigated by catalytical oxidation of diaminobenzidine (DAB) in the presence of H₂O₂. Integration by the aptasensing strategy, a photoelectrochemical (PEC) "signal-on" aptasensor was prepared, which exhibited a broader linear range of 0.5 pg mL^-1-100 ng mL^-1 with a lower limit of detection (LOD = 0.09 pg mL^-1, S/N = 3). This work provides a feasible strategy to develop advanced PEC biosensors for actual analysis of environmental pollutants.

Tailoring enzymatic loading capacity on CdS nanorods@ZnIn2S4 nanosheets 1D/2D heterojunctions: Toward ultrasensitive photoelectrochemical bioassay of tobramycin

Despite advances in the development of photoelectrochemical (PEC) sensor, modulating the PEC response of assembled heterostructure interface is still a great challenge. Here, an ultrasensitive PEC aptasensor for tobramycin (TOB) assay was conducted based on one-dimensional/two-dimensional CdS nanorods@ZnIn₂S₄ nanosheets (1D/2D CdS NRs@ZnIn₂S₄ NSs) heterojunctions by tailoring enzymatic loading capacity. Firstly, alkaline phosphatase modified TOB aptamer (ALP-Apt) was linked via specific base complementary pairing, and insoluble precipitations were then produced through the ALP-triggered catalytic reaction with the aid of Ag⁺, which prevented the charge transfer and resulted in the decrement of photocurrent. In the presence of TOB, partial ALP-Apt detached from the electrode surface due to the strong affinity between TOB and its aptamer, leading to a reduction in the amount of ALP and insoluble precipitate, in turn the PEC response partially recovered. The photocurrents exhibited a wider linear range towards the TOB concentration of 1.0-5.0 × 10⁴ pg mL^-1, with a low detection limit of 0.96 pg mL^-1. The constructed PEC aptasensor gained satisfactory results for TOB assay in milk samples as well, which also offered significant promise for other pollutants in environmental analysis.

Bifunctional photoelectrochemical aptasensor based on heterostructured Ag(3)PO(4)/Ag/TiO(2) nanorod array for determination of two tumor markers

Constructing of heterostructures can significantly improve the photoelectrical (PEC) response signal by promoting the migration and suppressing the recombination of photogenerated carries. A bifunctional PEC sensing platform was designed for simultaneous high-performance detection of mucin-1 (MUC1) and carcinoembryonic antigen (CEA), which was based on generated Z-scheme heterostructured Ag₃PO₄/Ag/TiO₂ nanorod arrays (NAs) and enzyme-mediated catalytic precipitation by alkaline phosphatase (ALP) and Au/hollow Co₃O₄ polyhedron. The proposed aptasensor displayed linear ranges of 1.0-100 ng mL^-1 and 0.1-50 ng mL^-1 for MUC1 and CEA with limit of detections of 0.430 and 0.058 ng mL^-1, respectively. This strategy offers potential applications for early diagnosis, monitoring progression, and even evaluating the prognosis of breast cancer in practice.

Design an efficient photoelectrochemical aptasensor for PCB72 based on CdTe@CdS core@shell quantum dots-decorated TiO2 nanotubes

In this work, an efficient and novel photoelectrochemical (PEC) aptasensor for 2,3',5,5'-tetrachlorobiphenyl (PCB72) was constructed based on CdTe@CdS core@shell quantum dots (CdTe@CdS QDs)-decorated TiO₂ nanotubes (TiO₂ NTs). CdTe@CdS QDs were prepared by the combination of CdTe and CdS with a proper lattice mismatch. Due to their large band offsets, core@shell QDs can reduce undesirable carrier recombination, significantly improving their charge separation efficiency. Then the synthesized CdTe@CdS QDs were modified on TiO₂ NTs (CdTe@CdS QDs/TiO₂ NTs) through electrostatic adsorption method. The as-prepared composites exhibit a wide visible light absorption range, good PEC activity and high photoelectric conversion efficiency. Also, the PEC aptasensor prepared via the immobilization of anti-PCB72 aptamer on the composites exhibits outstanding analytical performance with high sensitivity and specificity for PCB72 under visible-light irradiation, achieving a detection limit as low as 0.03 ng/L. It was also applied to detect PCB72 in four different real environmental samples with satisfactory results.

Self-powered photoelectrochemical aptasensor based on AgInS2@Co/Ni-UiO-66@CDs photoelectrode for estradiosl detection

A self-powered photoelectrochemical (PEC) aptasensor was constructed to sensitively detect 17β-estradiol (E₂). Firstly, a reasonable AgInS₂@Co/Ni-UiO-66@Carbon Nanodots (CDs) photoelectrode with excellent photoelectrochemical performance was built by a simple two-step preparation method. The Co and Ni doping markedly improved the activity of UiO-66; the matched energy level of AgInS₂ and Co/Ni-UiO-66 promoted the separation of electron-hole pairs, and the coupling of CDs further enhanced the conductivity and light utilization. Therefore, a steady anode-photocurrent signal output was obtained in 0.0 V bias voltage, providing a reliable photoelectric translating platform for assembling a self-powered PEC aptasensor. The E₂-aptamer was adopted as a recognition unit to enhance the selectivity and sensitivity of the proposed aptasensor. The specific recognition reaction between E₂ and aptamer administering to a raised photocurrent signal and the concentration of E₂ was quantified by counting the fluctuation of the anode-photocurrent signal. The linear response range of the PEC aptasensor was 1.0 × 10^-5-10 nmol/L, and the detection limit (S/N = 3) was lower than 3.0 fmol/L under optimal conditions. The fabricated aptasensor exhibited admirable selectivity, high sensitivity, rapid response, and wide linear range, demonstrating an extensive application prospect for environmental endocrine disruptor detection.

Photoelectrochemical aptasensor for sensitive detection of tetracycline in soil based on CdTe-BiOBr heterojunction: Improved photoactivity enabled by Z-scheme electron transfer pathway

Exploring effective methods for tetracycline (TC) detection in soil has great significance because of its emerging environmental problem and increasing threat to soil quality and general public health worldwide. In this work, a sensitive photoelectrochemical (PEC) aptasensor toward TC detection was designed and constructed based on an efficient photosensitive material of Z-scheme CdTe-BiOBr heterojunction. Due to the sensitization of CdTe quantum dots (QDs) on the BiOBr nanoflowers, the photocurrent intensity of the CdTe-BiOBr heterojunction was enhanced about 5.0-fold and 8.0-fold than that of pure BiOBr and CdTe under visible-light irradiation, which was attributed to the low electron-hole combination efficiency, high visible light utilization efficiency, and high carrier density of the heterojunction. On the merits of the excellent PEC activity of the CdTe-BiOBr and the specificity of the aptamer, the proposed PEC aptasensor has the advantages of satisfying linear range (from 10 to 1500 pM), low detection limit (9.25 pM), good selectivity, and reproducibility. In addition, acceptable accuracy was obtained for TC detection in real soil sample, giving acceptable accuracy in comparison with the referenced high-performance liquid chromatography-diode array detector method, revealing a promising avenue for accurate and ultrasensitive estimation of other kinds of contaminants in the broad field of analysis.

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel "signal-off" PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0-250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.

A flexible photoelectrochemical aptasensor using heterojunction architecture of α-Fe2O3/d-C3N4 for ultrasensitive detection of penbritin

The performance of photoelectrochemical (PEC) analysis system relies closely on the properties of the photoelectric electrodes. It is of great significance to integrate photoactive materials with flexible substrates to construct ultra-sensitive PEC sensors for practical application. This work reports a novel photoelectrode developed by immobilizing α-Fe₂O₃ nanoparticles (NPs)/defect-rich carbon nitride (d-C₃N₄), an excellent Z-scheme heterojunction photoelectric material, onto three-dimensional (3D) flexible carbon fiber textile. Specifically, 3D hierarchical structure of flexible carbon fiber textile provides larger specific surface area and higher mechanical strength than traditional electrodes, resulting in more reaction sites and faster reaction kinetics to achieve signal amplification. Simultaneously, α-Fe₂O₃/d-C₃N₄ Z-scheme heterojunction exhibits enhanced light absorption capability and high redox ability, thus dramatically improving the PEC performance. This photoelectrode was used to construct a flexible PEC aptasensor for ultrasensitive detection of penbritin, demonstrating excellent performance in terms of wide linear range (0.5 pM-50 nM), low detection limit (0.0125 pM) and high stability. The design principle is applicable to the manufacture of other photoelectric sensing systems, which provides an avenue for the development of portable environmental analysis and field diagnostics equipment.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

Signal-off photoelectrochemical aptasensor for kanamycin: Strand displacement reaction combines p-n competition

A"signal-off" photoelectrochemical aptasensor based on p-n type semiconductor competitive quenching effect and strand displacement reaction was constructed for the determination of kanamycin. Au NPs@MgIn₂S₄-graphene composite was used as n-type photoactive semiconductor material. In the presence of the kanamycin, strand displacement reaction was triggered and the p-type CuInS₂ quantum dots labeled aptamer was introduced on the Au NPs@MgIn₂S₄-graphene surface. The CuInS₂ quantum dots can competitive consume the electron donors (AA) and light energy of the PEC system, thus quenched the anodic photocurrent of Au NPs@MgIn₂S₄-graphene. The photocurrent decreased with the increase of kanamycin concentration. The linear range of kanamycin was 1.0 pM-10 μM, and the detection limit was 1.7 pM. In addition, the method can be used for the determination of kanamycin in milk and honey.

Simultaneous detection of enrofloxacin and ciprofloxacin in milk using a bias potentials controlling-based photoelectrochemical aptasensor

It is important to develop highly-active photoelectrochemical (PEC) materials and use novel sensing strategy for constructing high-PEC-performance sensors with multiplex detection abilities, owing to the simultaneous presence of multiple antibiotic residues in food. Herein, a bias-potential-based PEC aptasensor was prepared for the trace detection of dual antibiotic analytes, enrofloxacin (ENR) and ciprofloxacin (CIP), which often coexist in milk samples. Here, two materials were developed with excellent PEC performance: three-dimensional nitrogen-doped graphene-loaded copper indium disulfide (CuInS₂/3DNG) and Bi³⁺-doped black anatase titania nanoparticles decorated with reduced graphene oxide (Bi³⁺/B-TiO₂/rGO). By applying different bias potentials to the two materials near one ITO electrode, the cathodic current generated by CuInS₂/3DNH and the anodic current generated by Bi³⁺/B-TiO₂/rGO could be clearly distinguished without interfering with each other. Then, ENR and CIP aptamers were respectively modified onto the surface of CuInS₂/3DNH and Bi³⁺/B-TiO₂/rGO to construct a PEC aptasensor for the sensitive detection of ENR and CIP. Under optimal conditions, the proposed aptasensor exhibited wide linear ranges of ENR (0.01-10000 ng/mL) and CIP (0.01-1000 ng/mL), and relatively low detection limits of 3.3 pg/mL to ENR and CIP (S/N = 3). The aptasensor was successfully applied to the detection of ENR and CIP in milk samples.

Ultrasensitive zero-background photoelectrochemical biosensor for analysis of organophosphorus pesticide based on in situ formation of DNA-templated Ag2S photoactive materials

Herein, a novel signal-on photoelectrochemical (PEC) biosensor with nearly zero background noise (ZBN) was first fabricated to determine the presence of organophosphorus pesticide based on in situ formation of DNA-templated Ag₂S photoactive materials, accompanied by hybridization chain reaction (HCR) signal amplification. The capture probe (S1) on the gold nanoparticle-modified electrode can hybridize with the aptamer molecule to generate a simple PEC biosensor. In the presence of a target molecule, the aptamer molecule is released on the double-stranded DNA (dsDNA)-modified PEC biosensor. Meanwhile, the capture probe remains on the electrode and can open the DNA hairpins (H1, H2) which are rich in cytosine, to trigger the HCR reaction. The rich "C" strands are uncovered after formation of a long dsDNA polymer strand, which can assemble multiple silver ions (Ag⁺) by means of by C-Ag⁺-C chelation. Then, a large number of Ag₂S can be generated by challenging with S^2- solution, producing a satisfactory photocurrent signal. The photoactive material is formed in situ, which eliminates the laborious operation. Moreover, the signal can be highly amplified with nearly zero background noise and HCR signal amplification. Under optimal conditions, the ZBN aptasensor exhibited high sensitivity and selectivity, with a low detection limit of 2 pg mL^-1 for malathion. Importantly, the sensing platform can also be applied to determine the presence of malathion in real samples. In this assay, a novel signal-on photoelectrochemical biosensor with nearly zero background noise was first fabricated to determine the presence of organophosphorus pesticide based on in situ formation of DNA-templated Ag₂S photoactive materials, accompanied by hybridization chain reaction signal amplification.

Photoelectrochemical detection for 3,3',4,4'-tetrachlorobiphenyl in fish based on synergistic effects by Schottky junction and sensitization

In this study, a novel signal amplification strategy on photoelectrochemical (PEC) aptasensor was designed for high-sensitivity and -selectivity detection of 3,3',4,4'-tetrachlorobiphenyl (PCB77) on the basis of Schottky junction and sensitization. First, the Schottky barrier not only provided an electron-transfer irreversible passage from CuO to Au Nanoparticles (NPs) but also generated excellent local surface plasmon resonance between CuO and Au NPs, thus improving the efficiency of charge separation and light absorption. Second, to further improve the response of the PEC aptasensor under the action of the sensitization, the complementary-DNA-functionalized CdS quantum dots were introduced onto the surface of CuO/Au NPs via hybridization of the target aptamer. The PEC aptasensor exhibited a low detection limit of 17.3 pg L^-1, and a wide linear response was shown at a range of 0.2-220 ng L^-1 depending on the variation of photocurrent before and after incubation.

A signal-on photoelectrochemical aptasensor for chloramphenicol assay based on 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays

Severe challenges are still remained for development of highly sensitive, selective and stable photoelectrochemical (PEC) sensing technology, albeit with its broad application for chloramphenicol (CAP) detection. Herein, a novel "signal-on" PEC aptasensor was fabricated based on a 3D self-supporting Z-scheme AgI/Ag/BiOI heterojunction arrays subtly integrated with in-situ formed biocatalytic precipitation (BCP) for highly sensitive and selective determination of CAP. Impressively, the HRP modified CAP aptamer (HRP-CAP aptamer) was released from the electrode by its strong affinity to the introduced CAP, and gradually terminated the BCP reaction, in turn recovering the photocurrent. By virtues of the 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays and BCP signal amplification strategy, the resultant PEC sensor exhibited a wide linear range of 2-250 nM with a limit of detection (LOD) as low as 0.226 nM (S/N = 3). This work opens a new avenue for design of PEC aptasensing strategy and exhibits the marvelous potential in bioanalysis of environmental samples.

Design of ultrathin nanosheet subunits ZnIn2S4 hollow nanocages with enhanced photoelectric conversion for ultrasensitive photoelectrochemical sensing

Herein, a high-efficiency photoactive material, hollow ZnIn₂S₄ nanocages (ZIS-HNCs) composed of ultrathin nanosheets were creatively synthesized via a metal-organic framework (MOF) derived solvothermal method. It had been specified the underlying mechanism of the ZIS-HNCs evolution under the MOF templated surface. Subsequently, the obtained ZIS-HNCs combined with annealing TiO₂ modified electrode (ZIS-HNCs@TiO₂), and the ZIS-HNCs@TiO₂ exhibited intense transient photocurrent. The enhanced photocurrent signal benefited from the multiple light capture effect of ZIS-HNCs, ultrathin nanosheet subunits of ZIS-HNCs, and typical type Ⅱ heterojunction, which could effectively retard the photoexcited electron-hole pairs recombination, and accelerated charge separation and transfer. Taking antibiotic lincomycin (Lin) as a model, a signal-off photoelectrochemical (PEC) aptasensor based on the ZIS-HNCs@TiO₂ was established and manifested a high sensitive detection for Lin with a linear response range from 0.0001 to 0.1 nM as well as an ultralow detection limit of 0.084 pM. Additionally, the proposed PEC aptasensor showed acceptable stability and remarkable selectivity. Therefore, this study provides a promising strategy to design nanomaterials with superior photoelectric activity for PEC sensing applications.

Visible light-activated self-powered photoelectrochemical aptasensor for ultrasensitive chloramphenicol detection based on DFT-proved Z-scheme Ag2CrO4/g-C3N4/graphene oxide

A visible light self-powered photoelectrochemical (PEC) aptasensor based on silver chromate particles, graphitic carbon nitride nanosheets and graphene oxide sheets (Ag₂CrO₄/g-C₃N₄/GO) for the ultrasensitive detection of chloramphenicol (CAP) was reported in this work. g-C₃N₄ was considered to be the fundamental photoelectric material because of its great oxidation ability of photogenerated hole as well as excellent biocompatibility and low toxicity. However, the narrow light absorption range and rapid carrier recombination rate limit the application of pure g-C₃N₄. Herein, Ag₂CrO₄ and GO as photosensitizer were introduced to improve the photoelectric properties of g-C₃N₄. The photocurrent of the developed ternary composite was about 3 times higher than that of pristine g-C₃N₄, which proves it can be used as a suitable photoelectric active material. Moreover, the mechanism of Z-scheme electron transfer path was proved by density functional theory (DFT) calculation. The fabricated PEC aptasensor exhibited high sensitivity toward CAP with a wide liner response of 0.5 pM to 50 nM and a detection limit of 0.29 pM. The specific recognition mechanism and excellent sensing performance indicated this aptasensor could serve as a useful tool for selective and ultrasensitive CAP detection in practical analysis.

A sensitive and stable visible-light-driven photoelectrochemical aptasensor for determination of oxytetracycline in tomato samples

Sensitive detection of oxytetracycline (OTC) has attracted increasing attention worldwide due to the relationship between food safety and human health problems. In this work, a visible-light-driven photoelectrochemical (PEC) OTC aptasensor was constructed using Bi₄VO₈Cl/nitrogen-doped graphene quantum dots (Bi₄VO₈Cl/N-GQDs) nanohybrids as photoactive material and OTC aptamer as identification element. Owing to the well matched heterojunction of Bi₄VO₈Cl and nitrogen-doped graphene quantum dots (N-GQDs), the photogenerated electron-hole pairs could be separated effectively, so that the photocurrent intensity of as-prepared Bi₄VO₈Cl/N-GQDs nanohybrids was about 7 times higher than pure Bi₄VO₈Cl and had higher stability. The constructed "signal-off" PEC aptasensor realized OTC detection in tomato samples with excellent sensitivity, specificity and repeatability. The photocurrent decreased with the increase of OTC concentration in a range from 0.1 nM to 150 nM, and the detection limit was 0.03 nM (S/N = 3). The national standard method was used to compare with our method and the results were consistent.

Ultrasensitive photoelectrochemical aptasensor for diclofenac sodium based on surface-modified TiO2-FeVO4 composite

Herein, a photoelectrochemical (PEC) aptasensing platform was designed by integrating surface oxygen vacancy (OV) defects, Ti³⁺ self-doping, the heterojunction, and resonance energy transfer (RET) effect into one platform for the detection of diclofenac sodium (DCF). Briefly, OV defects were introduced on TiO₂ nanospheres with simultaneous Ti³⁺ self-doping, followed by a well-separated deposition of FeVO₄ nanoparticles on TiO₂ to obtain a Ti³⁺-O-TiO₂/FeVO₄ heterojunction. The surface modification of OVs, Ti³⁺ doping, and deposition of FeVO₄ were confirmed by SEM, XPS, EPR, DRS, and PEC measurements. The surface OVs and doping of Ti³⁺ species created a new donor (defect) energy level under the conduction band of TiO₂, which minimized the bandgap and thereby improved the visible light absorption of TiO₂. Moreover, the capture of photo-excited electrons by surface OVs could hinder the electron-hole recombination. Due to the intimate surface contact and perfect energy matching between TiO₂ and FeVO₄, the formation of heterojunction decreased the bandgap and facilitated the electron-hole separation of TiO₂. All these above events contributed to the enhancement of the PEC signals, which were then quenched by the RET effect between Ti³⁺-O-TiO₂/FeVO₄ and Au nanoparticle (AuNP)-labeled cDNA that had been attached to its complementary DCF aptamer on Ti³⁺-O-TiO₂/FeVO₄|ITO. The addition of target-DCF detached AuNP-labeled cDNA from the electrode to recover the photocurrent, resulting in a "signal-on" PEC aptasensor that exhibited a 0.1-500-nM linear range and a detection limit of 0.069 nM for DCF, attributed to the excellent amplification of the proposed aptasensing platform.

Visible light-driven photoelectrochemical ampicillin aptasensor based on an artificial Z-scheme constructed from Ru(bpy)32+-sensitized BiOI microspheres

Dye sensitization is an alternative strategy to improve photoelectric activity of semiconductors and, particularly, to enhance the activity towards visible light domain. Herein, an artificial Z-scheme bipyridine ruthenium (Ru(bpy)32+) sensitizing narrow-gap bismuth oxy-iodide (BiOI) microspheres was constructed by a simple electrostatic interaction strategy for the first time. The electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) analysis showed that this design of such Z-scheme structure was helpful to enhance the interfacial charge transfer and improve the photoelectric conversion efficiency. In addition, due to the sensitization of Ru(bpy)32+, the band gap was narrowed from 1.8 eV of BiOI microspheres to 1.3 eV of BiOI/Ru(bpy)32+ microspheres, leading to improve the utilization of visible light. So that, the photocurrent of the resulted BiOI/Ru(bpy)32+ was 13.0 times that of pure BiOI microspheres. In view of the outstanding photoelectrochemical (PEC) performance of BiOI/Ru(bpy)32+ and the high specificity of the aptamer, the PEC aptasensor for ampicillin (AMP) merits the excellent detection performance including a broad linear ranging from 1 × 10-7 nM to 100 nM as well as a low detection limit of 3.3 × 10-8 nM (S/N = 3). This work not only provides a novel way to construct and design highly efficient photoactive materials for PEC detection, but also broadens the application of Z-scheme in the field of sensing.

Ternary Z-scheme heterojunction of Bi SPR-promoted BiVO4/g-C3N4 with effectively boosted photoelectrochemical activity for constructing oxytetracycline aptasensor

Developing photoactive materials with wide spectral response is critical to improve the sensitivity of PEC biosensors. Herein, a sensitive photoelectrochemical (PEC) aptasensor was fabricated based on Bi surface plasmon resonance (SPR)-promoted BiVO₄/g-C₃N₄ (Bi/BiVO₄/g-C₃N₄) as photoactive material for the detection of oxytetracycline (OTC). Ternary Z-scheme Bi/BiVO₄/g-C₃N₄ heterojunction exhibited widest spectral response and best PEC activity compared to g-C₃N₄, BiVO₄, Bi/BiVO₄, and BiVO₄/g-C₃N₄. The wide spectral response and high PEC activity could be attributed to three reasons: Firstly, the SPR effect of Bi could greatly increase light harvesting; Secondly, Bi served as an electron conduction bridge between BiVO₄ and g-C₃N₄ to form Z-scheme structure, significantly accelerating the separation of photogenerated carriers; Thirdly, the synergism of Z-scheme heterojunction and the SPR effect of Bi efficiently boosted the photoelectric response. Based on the above sensitization strategies, the proposed PEC aptasensor for OTC determination showed a wide linear range of 0.01-1000 nM and a low detection limit (S/N = 3) of 3.3 × 10^-3 nM. Moreover, the high stability, satisfactory repeatability and favorable practicability of the fabricated PEC aptasensor revealed the potential applications for accurate monitoring of antibiotics in environmental media.

Co3O4 nanoparticles/graphitic carbon nitride heterojunction for photoelectrochemical aptasensor of oxytetracycline

As a broad-spectrum tetracycline antibiotic, the overuse of oxytetracycline (OTC) causes antibiotics residues in the environment and seriously threats to human health owing to effective antibacterial properties. Thus, it is particularly important to design a photoelectrochemical (PEC) aptasensor to detect OTC with excellent performance. Herein, we developed a selective and stable PEC aptasensor of OTC on the basis of Co₃O₄ nanoparticles (Co₃O₄ NPs)/graphitic carbon nitride (g-CN) heterojunction, used as PEC active materials. The Co₃O₄ NPs were successfully grown on the g-CN via grinding and calcining mixture of Co₃O₄ precursors and bulk g-CN. The Co₃O₄/g-CN heterojunction with improved light utilization and promoted electrons/holes separation capability can exhibit higher PEC signal than that of g-CN. In order to implement the purpose of specific recognition, OTC-aptamer was introduced into modified electrode to construct highly selective PEC aptasensor for OTC determination, which can possess wide linear range (0.01-500 nM) with low detection limit (3.5 pM, S/N = 3). This PEC aptasensor platform with excellent selectivity and high stability can provide a practical application in the field of water monitoring.

A photoelectrochemical aptasensor for the sensitive detection of streptomycin based on a TiO2/BiOI/BiOBr heterostructure

In photoelectrochemical sensor (PEC sensor), sensitivity and selectivity are two essential factors which are determined by photosensitive of materials and identification of elements. Herein, a novel PEC aptamer sensor for streptomycin-specific detection was developed, with which the visible-light-active TiO₂/BiOI/BiOBr heterostructure and aptamers were employed as photoactive material and bio-identification elements, separately. The combination of an appropriate amount of TiO₂ with BiOI/BiOBr enhanced the photocurrent response, and thus is beneficial to the construction of PEC sensors. In addition, the one-pot synthesis of TiO₂/BiOI/BiOBr has the advantage of being environmentally-friendly. Under optimized conditions, the photocurrent response of aptamer/TiO₂/BiOI/BiOBr/ITO is linear with SRT concentration from 0.05 to 150 nM, and the detection limit (S/N = 3) is as low as 0.04 nM. This novel PEC sensing strategy provided an ultra-sensitive sensor with high selectivity and stability for SRT detection.

Quantification of zearalenone in mildewing cereal crops using an innovative photoelectrochemical aptamer sensing strategy based on ZnO-NGQDs composites

Zearalenone (ZEN) is highly toxic to humans, and therefore, development of sensitive and effective methods for ZEN quantification in cereal crops is particularly important. Here, an innovative photoelectrochemical (PEC) aptasensor based on simply in-situ conjugated composites of zinc oxide-nitrogen doped graphene quantum dots (ZnO-NGQDs) was constructed. On addition of NGQDs, the composites displayed higher PEC signal with 8.8-fold enhancement than pure ZnO nanoparticles. A sensitive and selective PEC aptasensor was fabricated by combining the composites with ZEN aptamer, which yielded an excellent analytical performance for ZEN detection, with a wide linear range of 1.0 × 10^-13-1.0 × 10^-7 g mL^-1 and a low detection limit of 3.3 × 10^-14 g mL^-1. Good recoveries were obtained using the PEC aptasensor, which were consistent with those obtained using the national standard method (HPLC-MS). Finally, ZEN in mildewing cereal crops was monitored with the PEC aptasensor, exhibiting good potential for application in cereal crops for early diagnosis.

A photoelectrochemical aptasensor based on p-n heterojunction CdS-Cu2O nanorod arrays with enhanced photocurrent for the detection of prostate-specific antigen

A sensitive photoelectrochemical (PEC) aptasensor was constructed for prostate-specific antigen (PSA) detection using an enhanced photocurrent response strategy. The p-n heterostructure CdS-Cu₂O nanorod arrays were prepared on Ti mesh (CdS-Cu₂O NAs/TM) by a simple hydrothermal method and successive ionic-layer adsorption reactions. Compared with the original CdS/TM, the synergistic effect of p-n type CdS-Cu₂O NAs/TM and the internal electric field realizes the effective separation of photoinduced electron-hole pairs and improves the PEC performance. In order to construct the aptasensor, an amino-modified aptamer was immobilized on CdS-Cu₂O NAs/TM to serve as a recognition unit for PSA. After the introduction of PSA, PSA was specifically captured by the aptamer on the PEC aptasensor, which can be oxidized by photogenerated holes to prevent electron-hole recombination and increase photocurrent. Under optimal conditions, the constructed PEC aptasensor has a linear range of 0.1-100 ng·mL^-1 and a detection limit as low as 0.026 ng·mL^-1. The results of aptasensor detection of human serum indicate that it has broad application prospects in biosensors and photoelectrochemical analysis.

Ultrathin PtNi nanozyme based self-powered photoelectrochemical aptasensor for ultrasensitive chloramphenicol detection

Nanozymes have gained increasing attention in the field of biosensing. Rationally designed nanozymes with excellent catalytic activity are accessible to substitute natural enzymes. Herein, a novel self-powered photoelectrochemical (PEC) aptasensor was constructed for ultrasensitive detection of chloramphenicol (CAP) based on ultrathin PtNi nanowires (NWs) as nanozyme and benzene-ring doped g-C₃N₄ (BR-CN) as the photoactive material. The prepared 1-nm-thick PtNi nanozyme acted as a peroxidase, possessing higher catalytic activity than natural horseradish peroxidase (HRP) and other Pt-based mimic enzymes. Through the biotin-streptavidin specific interaction, streptavidin modified PtNi nanozyme was introduced into the dual-stranded DNA (dsDNA) formed by complementary DNA and biotinylated CAP aptamer. The PtNi nanozyme catalyzed 4-chloro-1-naphthol (4-CN) oxidation to generate insoluble precipitation on the electrode surface, resulting in an obvious photocurrent reduction. In the presence of CAP, the CAP aptamer was released from the electrode due to strong affinity with CAP, causing the decrease of catalytic precipitation and consequently the generation of a high photocurrent signal. On the basis of PtNi nanozyme signal amplification, the developed self-powered PEC aptasensor showed a wide linear range of 0.1 pM-100 nM with an ultralow detection limit of 26 fM for the determination of CAP. This work provides a feasible strategy for the design of high-activity nanozyme and self-powered PEC biosensor to achieve the ultrasensitive detection of target analyte.

Dual-mode visible light-induced aptasensing platforms for bleomycin detection based on CdS-In2S3 heterojunction

CdS-In₂S₃ heterojunction with enhanced photoelectrochemical (PEC) performance was synthesized to construct dual-mode visible light-induced biosensors for highly sensitive and selective detection of bleomycin (BLM). Due to improved absorption in the visible region and suppressed recombination of electron-hole pairs in the heterojunction, CdS-In₂S₃ composite exhibited enhanced photocurrent response under visible light illumination. Using CdS-In₂S₃ as photoactive materials and BLM-binding aptamer as recognition element, a PEC aptasensor displaying a declined photocurrent response to BLM was facilely constructed, which was linear to BLM concentration in the range of 5.0-250 nM. On the other hand, the CdS-In₂S₃ photoanode was employed to construct a photofuel cell (PFC). In such a PFC, the oxidation of water on CdS-In₂S₃ photoanode under visible light illumination and the reduction of oxygen on Pt cathode led to the generation of electricity. When BLM-binding aptamer was immobilized on CdS-In₂S₃ photoanode, the output power of the PFC was inversely proportional to the logarithm of BLM concentration from 10 to 250 nM, offering a visible light-induced self-powered sensing platform for BLM detection. Both of the proposed sensors showed high selectivity, good reproducibility and high stability. They were successfully applied to the determination of BLM in human serum samples.

Enhanced photoelectric conversion efficiency: A novel h-BN based self-powered photoelectrochemical aptasensor for ultrasensitive detection of diazinon

This work presents a novel hexagonal boron nitride (h-BN) based self-powered photoelectrochemical (PEC) aptasensor for ultrasensitive detection of diazinon (DZN) with excellent photoelectric conversion efficiency. It was the first time that h-BN based materials were applied to PEC aptasensor, in which the construction of Z-scheme heterojunction of h-BN and graphitic carbon nitride (CN) via doping sulfur into h-BN was innovatively proposed. Meanwhile, Au nanoparticles (AuNPs) were utilized for the surface plasmon resonance (SPR) effect and the formation of new recombination centers. The charge transfer mechanism was expounded and verified by the electron spin resonance (ESR) spin-trap technique. The proposed PEC aptasensor for determination of DZN exhibited a wide linear range from 0.01 to 10000 nM and a low detection limit of 6.8 pM with superb selectivity and remarkable stability. Moreover, the constructed PEC aptasensor performed well with excellent recoveries in three different real samples. This work illustrated that PEC aptasensor is a promising alternative to conventional analytical technologies for the detection of DZN and other organophosphorus (OP) pesticides. The designing ideas of the proposed h-BN based material can provide a foothold for the innovative construction of photoactive materials for PEC bioanalysis.

C60@C3N4 nanocomposites as quencher for signal-off photoelectrochemical aptasensor with Au nanoparticle decorated perylene tetracarboxylic acid as platform

Herein, a novel signal-off photoelectrochemical (PEC) aptasensor was proposed for sensitive detection of thrombin on the basis of C₆₀@C₃N₄ nanocomposites as quencher and Au nanoparticles (depAu) decorated perylene tetracarboxylic acid (PTCA) as sensing platform. Owing to the excellent membrane-forming of PTCA and superior conductivity of depAu, the PTCA between two depAu layers can simply and effectively produce an extremely high initial photocurrent to afford a precondition for sensitive biodetection. Thereafter, the assembly of C₆₀@C₃N₄ nanocomposites on electrode via typical sandwich reaction enabled the generation of a significantly decreased photocurrent. Here, the C₃N₄ with high surface area not only provided massive binding sites for C₆₀ immobilization, but also partly competed with PTCA in light absorption for producing a significantly smaller photocurrent in the presence of electron donor ascorbic acid (AA). Additionally, both the C₃N₄ and C₆₀ have the poor conductivity, which could inhibit the electron transfer to achieve a further decreased photocurrent, effectively improving the sensitivity of proposed biosensor. As a result, the PEC biosensor in a "signal-off" mode showed an extremely low detection limit down to 1.5 fM, providing a sensitive and universal strategy for protein detection.

Immobilization-free photoelectrochemical aptasensor for environmental pollutants: Design, fabrication and mechanism

Atrazine (ATZ) is one of the most widely used and highly toxic triazine herbicides in the world. Photoelectrochemical (PEC) method is an attractive and sensitive alternate for ATZ. However, for conventional PEC sensors, recognition elements usually need to immobilize on electrode surface, where a complex procedure is unavoidable and the reproducibility of sensors fabrication is usually poor. Therefore, we herein proposed a new and feasible strategy for developing a signal-on immobilization-free PEC aptasensor to ATZ. Aptamer for ATZ is combined with graphene to obtain APT-GN complex, serving as the recognition element in solution. TiO₂ nanotubes (NTs) electrode deposited with Au nanoparticles (NPs) is used as the substrate electrode. After further self-assembled with 1-Mercaptooctane (MCT), the photo-generated carriers transfer between the resultant electrode and the electrolyte will be blocked, leading to a signal-off of the photocurrent. But when sensing ATZ, aptamers on APT-GN will be grasped by ATZ, leaving free graphene to assemble onto MCT/Au NPs/TiO₂ NTs, which will largely "turn on" the photocurrent response of the substrate electrode due to the efficient carrier transport efficiency of graphene. Meanwhile, simultaneous addition of deoxyribonuclease I (DNase I) can bring about further cycling amplification of the signal enhancement. The as-designed PEC aptasensor exhibits a linear range from 50.0 fM to 0.3 nM with detection limit of 12.0 fM for ATZ. Since the reaction of recognition elements and targets ATZ occurs in homogeneous solution rather than on the photoelectrode surface, this PEC aptasensor exhibits advantages of high stability, anti-interference ability, reproducibility, and wide pH and ion strength feasibility range. A promising immobilization-free aptasensing platform has thus been provided not only for ATZ but also for other kinds of environmental pollutants.

Oxygen vacancy enhanced photoelectrochemical performance of Bi2MoO6/B, N co-doped graphene for fabricating lincomycin aptasensor

Oxygen defect-engineered is an important strategy to improve the photoelectric activity of materials. Herein, a facile one-pot solvothermal method was utilized to synthesize visible light-responsive photoactive Bi₂MoO₆ nanoparticles anchored boron and nitrogen co-doped graphene (BNG) nanosheets nanocomposites with oxygen vacancy. The incorporation of BNG nanosheets increased the oxygen vacancies amounts on Bi₂MoO₆ remarkably, and the presences of oxygen vacancies can be beneficial to broaden the absorption range. The absorption edge of Bi₂MoO₆/BNG was widened from 500 nm to 550 nm compared to Bi₂MoO₆, and the charge transfer was accelerated to improve the photoactive of Bi₂MoO₆/BNG. Under visible light illumination, the photoelectrochemical (PEC) response of the as-prepared Bi₂MoO₆/BNG was 11.6-fold, 6.7-fold, 3.1-fold and 2.4-fold higher than that of pristine Bi₂MoO₆, Bi₂MoO₆/graphene, Bi₂MoO₆/nitrogen doped graphene and Bi₂MoO₆/boron doped graphene. Using Bi₂MoO₆/BNG nanocomposites with the superior PEC performance as photoactive materials in combination with specifically recognized lincomycin (LIN) aptamer, a highly efficient PEC aptasensor was successfully constructed for sensitive analysis of LIN. Under optimal conditions, the proposed PEC aptasensor exhibited excellent analytical performance for LIN with a wide linear response of 1 × 10^-11 to 1 × 10^-6 mol L^-1 along with a low detection limit of 3.7 × 10^-12 mol L^-1 (defined as S/N = 3). The as-prepared Bi₂MoO₆/BNG nanocomposites exhibit excellent visible light response and PEC performance, indicating its potential applications in PEC biosensor.

Quenched sandwich-type photoelectrochemical aptasensor for protein detection based on exciton energy transfer

This work proposes a quenched photoelectrochemical sensing method for highly selective and sensitive detection of protein via Energy Transfer (ET) effect between the AuNPs and CdS:Mn quantum dots. This detection was performed on a sandwich-type aptamer sensing interface. Chitosan modified CdS:Mn/TiO₂/ITO electrode was used to immobilize capture DNA (S1) via -CONH- bond. In the presence of target protein, AuNPs labeled DNA (AuNPs-S2) was further bonded to the protein to fabricate sandwich sensing platform, which forced the AuNPs away from the electrode surface. In this state, the photocurrent was greatly depressed, mainly due to two factors: (a) the ET effect produced by interparticle distance between CdS:Mn and AuNPs; (b) the steric hindrance of AuNPs-S2 partly obstructs the diffusion of the electron donor. The photocurrent decreased with the increasing concentration of the target protein. Using thrombin as a target, this sensitized method showed a detectable range of 0.1 pM to 8 nM and a detection limit of 30 fM. It possessed high selectivity and good stability for detection of thrombin. This method is extremely flexible and can be extended to varieties of protein targets.

Design and construction of Z-scheme Bi2S3/nitrogen-doped graphene quantum dots: Boosted photoelectric conversion efficiency for high-performance photoelectrochemical aptasensing of sulfadimethoxine

Rational design and fabrication of Z-scheme visible-light-driven photoactive materials have drawn much attention owing to their great potential in handling environment and energy crisis. In this work, Z-scheme Bi₂S₃/nitrogen-doped graphene quantum dots (NGQDs) with superior photoelectric conversion efficiency were designed and fabricated, which demonstrated enhanced photoactivity compared with Bi₂S₃ owing to the improved separation efficiency of photogenerated electron and hole pairs. The emphasis was put on designing Z-scheme Bi₂S₃/NGQDs, and then the mechanism of Z-scheme charge transfer mode was verified by the electron spin resonance (ESR) technique. On this basis, the proposed sensor exhibited a wide linear range of 0.1-120 nM and a detection limit of 0.03 nM (S/N = 3) for SDM, with high sensitivity (0.075 μA nM ^-1), good selectivity and stability. Moreover, the proposed PEC aptasensor using Bi₂S₃/NGQDs as the photoelectrode achieved sensitive and selective determination of sulfadimethoxine in milk samples. This work could provide some ideas for designing other Z-scheme photoactive species and insights into the charge transfer mechanism of Z-scheme. Furthermore, the promising applicability of PEC aptasensor using photoactive species could be extended to other accurate monitoring for contaminants.

2D-porphrinic covalent organic framework-based aptasensor with enhanced photoelectrochemical response for the detection of C-reactive protein

In this study, a novel photoelectrochemical (PEC) aptasensor based on two-dimensional (2D) porphyrinic covalent organic frameworks (p-COFs) for the label-free detection of C-reactive protein (CRP) is presented. The obtained p-COFs possess high conductivity and an improved stability due to strong and rigid covalent linkages. The introduction of p-COFs hinder the recombination of electrons and holes, decreasing their band gap (E_g), thereby which improved the photocurrent conversion efficiency. Compared with pure porphyrin, p-COFs exhibited enhanced photocurrent intensity. An amplified photocurrent conversion efficiency and enhanced photocurrent results from H₂O₂, which act as active molecules and electron donors. As an unprecedented application of COFs in PEC bioanalysis, the detection of CRP with a PEC aptasensor is presented. The assembly of a CRP aptamer on the surface of Ag nanoparticles hinders the electron transfer, resulting in the decrease of the photocurrent response. This PEC aptasensor exhibits good analytical performances such as a rapid response, high stability, wide linear range and excellent selectivity, making COFs promising candidates for PEC bioanalysis.

Perovskite-type BiFeO3/ultrathin graphite-like carbon nitride nanosheets p-n heterojunction: Boosted visible-light-driven photoelectrochemical activity for fabricating ampicillin aptasensor

Developing effective sensing method for trace analysis of ampicillin (AMP) is urgent and significant due to its residue possess serious threats to human health. Herein, a p-n heterojunction, on the basis of p-type BiFeO₃ nanoparticles coupled n-typed ultrathin graphite-like carbon nitride (utg-C₃N₄) nanosheets, has been designed and synthesized via a simple electrostatic interaction strategy. Such p-n heterojunction has two advantages: one is capable to narrow the band gap of photoactive materials from 2.20 eV of BiFeO₃ down to 2.04 eV of BiFeO₃/utg-C₃N₄, leading to improve the efficiency of visible light utilization; and the other is to facilitate the charge separation rate, resulting in the boosted photoelectrochemical (PEC) performance of BiFeO₃/utg-C₃N₄. Under visible light illumination, the photocurrent of the resulted BiFeO₃/utg-C₃N₄ was 7.0-fold enhanced than that of pure BiFeO₃ nanoparticles, and indeed 2.3-fold enhanced comparing to BiFeO₃/bulk-C₃N₄. Based on excellent PEC properties of BiFeO₃/utg-C₃N₄, an on-off-on PEC aptasensor was successfully fabricated for ampicillin (AMP) determination with highly selectivity and sensitivity. The fabricated PEC aptasensor exhibited excellent PEC performance with a broad linear in the range from 1 × 10^-12 mol L^-1 to 1 × 10^-6 mol L^-1 as well as a low detection limit of 3.3 × 10^-13 mol L^-1 (S/N = 3), and also good feasibility in real sample. The excellent analytical performance indicated that PEC aptasensor on the basis of the visible light driven BiFeO₃/utg-C₃N₄ heterojunction can provide a promising biosensor platform for sensitive detection AMP in food and environment analysis.

ZnO flower-rod/g-C3N4-gold nanoparticle-based photoelectrochemical aptasensor for detection of carcinoembryonic antigen

A highly sensitive and selective photoelectrochemical (PEC) aptasensor was constructed for carcinoembryonic antigen (CEA) detection based on ZnO flower-rods (ZnO FRs) modified with g-C₃N₄-Au nanoparticle (AuNP) nanohybrids. The nanohybrids of g-C₃N₄-AuNPs can improve the visible light absorbance of ZnO FRs and enhance the PEC property. We designed a sandwichlike structure formed with DNA hybridization of NH₂-probe1, CEA aptamer, and CuS-NH₂-probe2 to detect CEA. The p-type semiconductor CuS nanocrystals (NCs) at the terminational part of sandwichlike structure work as electron traps to capture photogenerated electrons and consequently lead to a magnified photocurrent change. The results indicate that the photocurrent is increased when CEA antigen (Ag) is introduced. Since the sandwichlike structure is destroyed, CuS NCs are restricted to capture photogenerated electron. The PEC aptasensor for CEA determination is ranged from 0.01 ng·mL^-1 to 2.5 ng·mL^-1 with a detection of 1.9 pg·mL^-1. The proposed aptasensor exhibits satisfactory PEC performances with rapid detection, great sensitivity and specificity. Specially, this PEC aptasensor shows a reliable result for the determination of CEA in invalid human serum compared with the ELISA method. The designed aptasensor may provide a new idea for a versatile PEC platform to determine various molecules. Graphical abstract ᅟ.