Enhanced ammonia oxidation by a photoelectrocatalysis‑chlorine system: The role of ClO• and free chlorine

The decomposition of ammonia-N to environmental-friendly N2 remains a fundamental problem for water treatment. We proposed a way to selectively and efficiently oxidize ammonia to N2 through an integrated photoeletrocatalysis‑chlorine reactions (PECCl) system based on a bifunctional TiO2 nanotube photoanode. The ·OH and HClO can be simultaneously generated on the TiO2 nanotube photoanode in this system, which can in situ form ClO· for efficient ammonia removal. Compared with electrochemical‑chlorine (EC-Cl), photocatalysis‑chlorine (PC-Cl) and photoelectrocatalysis (PEC) systems, the PEC-Cl system exhibited much higher electrocatalytic activity due to the synergetic effect of photoelectrocatalyst and electrocatalyst in bifunctional TiO2 nanotube electrode. The removal efficiency of ammonia-N and total-N reached 100.0 % and 93.3 % at 0.3 V (vs Ag/AgCl) in the PEC-Cl system. Moreover, the system was efficient under various pH conditions. The reactions between ClO-/ClO· and the N-containing intermediates contributed to the high performance of the system, which expanded the reactions from the electrode surface to the electrolyte. Furthermore, radical scavenging and free chlorine determination experiments confirmed that ClO· and free chlorine were the main active species that enabled the ammonia oxidation. This study presents new understanding on the role of active species for ammonia removal in wastewater.

Micro/nano topological modification of TiO2 nanotubes activates Thy-1 signaling to control osteogenic differentiation of stem cells

Micro/nano topological modification is critical for improving the in vivo behaviors of bone implants, regulating multiple cellular functions. Titania (TiO2) nanotubes show the capacity of promoting osteoblast-related cell differentiation and induce effective osseointegration, serving as a model material for studying the effects of micro/nano-topological modifications on cells. However, the intracellular signaling pathways by which TiO2 nanotubes regulate the osteogenic differentiation of stem cells are not fully defined. Thy-1 (CD90), a cell surface glycoprotein anchored by glycosylphosphatidylinositol, has been considered a key molecule in osteoblast differentiation in recent years. Nevertheless, whether the micro/nano topology of the implant surface leads to changes in Thy-1 is unknown, as well as whether these changes promote osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). Here, TiO2 nanotubes of various diameters were prepared by adjusting the anodizing voltage. qPCR and immunoblot were carried out to assess the mechanism by which TiO2 nanotubes regulate Thy-1. The results revealed Ti plates harboring TiO2 nanotubes ∼100-nm diameter (TNT-100) markedly upregulated Thy-1. Subsequently, upregulated Thy-1 promoted the activation of Fyn/RhoA/MLC Ⅱ/F-actin axis, which enhanced the nuclear translocation of YAP. After Thy-1 knockdown by siRNA, the Fyn/RhoA/MLC Ⅱ/F-actin axis was significantly inhibited and TiO2 nanotubes showed decreased effects on osteogenic differentiation. Therefore, Thy-1 upregulation might be a major mechanism by which micro/nano-topological modification of TiO2 nanotubes promotes osteogenic differentiation in BMSCs. This study provides novel insights into the molecular mechanism of TiO2 nanotubes, which may help design improved bone implants for clinical application.

Enhanced perfluorooctane acid mineralization by electrochemical oxidation using Ti3+ self-doping TiO2 nanotube arrays anode

Perfluorooctanoic acid (PFOA) is of increasing concern due to its worldwide application and extremely environmental persistence. Herein, we demonstrated the electrochemical degradation of PFOA with high efficiency using the Ti³⁺ self-doping TiO₂ nanotube arrays (Ti³⁺/TiO₂-NTA) anode. The fabricated Ti³⁺/TiO₂-NTA anode exhibited vertically aligned uniform nanotubes structure, and was demonstrated good performance on the electrochemical degradation of PFOA in water. The degradation rate, total organic carbon (TOC) removal rate and defluorination rate of PFOA reached 98.1 %, 93.3 % and 74.8 %, respectively, after electrolysis for 90 min at low current density of 2 mA cm^-2. The energy consumption (7.6 Wh L^-1) of this electrochemical oxidation system using Ti³⁺/TiO₂-NTA anode for PFOA degradation was about 1 order of magnitude lower than using traditional PbO₂ anodes. Cathodic polarization could effectively prolong the electrocatalytic activity of the anode by regenerating Ti³⁺ sites. PFOA molecular was underwent a rapidly mineralization to CO₂ and F^-, with only low concentration of short-chain perflfluorocarboxylic acids (PFCAs) intermediates identified. A possible electrochemical degradation mechanism of PFOA was proposed, in which the initial direct electron transfer (DET) on the anode to yield PFOA free radicals (C₇F₁₅COO•) and hydroxyl radicals (•OH) oxidation were greatly enhanced. This presented study provides a novel approach for the purification of the recalcitrant PFOA from wastewaters.

Coupled porosity and heterojunction engineering: MOF-derived porous Co3O4 embedded on TiO2 nanotube arrays for water remediation

Strive to develop the interaction and efficient co-catalysts is one of the vital projects in realizing hybrid photocatalytic systems for water remediation. In this work, p-type porous Co₃O₄ was embedded onto n-type vertical TiO₂ nanotube via an in-situ thermal etching method. ZIF-67 was employed as the structural template for Co₃O₄, which then augmented the light harvesting ability of the resultant photocatalyst. Such improvement was prompted by the light reflecting and directing attributes of porous Co₃O₄. Therefore, a remarkable MB removal rate was attained under sunlight irradiation, with superoxide radical being identified as the major reactive species. Photoelectric properties evaluation also verified that the p-n heterojunction developed herein exhibits outstanding charges separation ability with low impedance, particularly under light irradiation. This work highlights the idea on coupling both porous and p-n heterojunction engineering in augmenting photoactivity of catalyst, while offering insights in such structure-mediating approach.

Scalable fabrication of tunable titanium nanotubes via sonoelectrochemical process for biomedical applications

Titanium does not react well with the human tissues and due to its bio-inert nature the surface modification has yet to be well-studied. In this study, the sonoelectrochemical process has been carried out to generate TiO₂ nanotube arrays on implantable Ti 6-4. All the prepared nanotubes fill with the vancomycin by immersion and electrophoresis method. Drug-releasing properties, antibacterial behavior, protein adsorption and cell attachment of drug-modified nanotubes are examined by UV-vis, flow cytometry, modified disc diffusion, BSA adsorption, and FESEM, respectively. The most uniform morphology, appropriate drug release, cell viability behavior and antibacterial properties can be achieved by samples anodized in the range of 60-75 V. Also improves the adsorption of BSA protein in bone healing and promotes osteoblast activity and osseointegration. Drug loading efficiency increases up to 60% via electrophoresis comparing the immersion method for anodized sample in 75 V. While electrophoresis does not affect the amount of vancomycin adsorption for lower voltages. Besides, the present study indicates that an anodized sample without drug loading has no antibacterial activity. Moreover, 28-days drug releasing from nanotubes is investigated by mathematical formula according to Fickian's law to find an effective dose of loaded drug.

TiO2 nanotubes/reduced GO nanoparticles for sensitive detection of breast cancer cells and photothermal performance

In this study, we developed a simple and cost effective aptasensor based on TiO₂ nanotubes-reduced graphene oxide (TiO₂ nanotube-rGO) linked to MUC1 aptamers for ultrasensitive electrochemical detection of breast cancer cell (MCF-7). Moreover, the photothermal performance of nanohybrid TiO₂-rGO was investigated for cancer treatment. In this regard, after synthesize of TiO₂ nanotubes via anodization process, TiO₂ nanotubes-rGO hybrid was synthesized by UV assisted reduction of GO and subsequent TiO₂ nanotubes attachment to rGO sheets. The resultant hybrid could provide an excellent large surface area leading to improvement of suitable sites for MUC1 aptamer immobilization. Our results revealed that TiO₂-rGO aptasensor exhibited superior analytical performance for MCF-7 cell detection with the detection limit of 40 cells.ml^-1 within the detection range of 10³-10⁷ cells. ml^-1. In addition, the designed aptasensor was effectively applied to detect MUC1 marker in a real sample. Moreover, the TiO₂ nanotube-rGO hybrid nanoparticles revealed great photothermal performance exposed to NIR laser. It could be concluded that nanohybrid TiO₂-rGO would be a useful and beneficial platform for detection and treatment of breast cancer.

Ti plate with TiO2 nanotube arrays as a novel cathode for nitrate reduction

The purpose of this research is to investigate the possibility of using a Ti plate with TiO₂ nanotube arrays as a novel cathode for nitrate reduction. TiO₂ nanotube arrays were grown on a Ti plate by anodization in a glycerol based electrolyte and annealed to change their crystallographic structure. Morphological and crystallographic structures of Ti plates with a TiO₂ nanotubular layer were analysed before and after anodization or annealing by using energy-dispersive spectroscopy, Brunauer-Emmett-Teller analysis and X-ray diffraction. Cyclic voltammetry and electrochemical impedance spectroscopy were also performed to test the electrochemical reactivity towards nitrate reduction. A lab-scale electrochemical reactor with a RuO₂/Ti anode and a Ti plate with a TiO₂ nanotubular layer as a cathode was operated to treat synthetic wastewater containing up to 600 mg L^-1 of NO₃-N. The Ti plate with a TiO₂ nanotubular layer was compared with other cathodes such as Ti, Cu, Ni, and Stainless Steel. The Ti plate with an anatase TiO₂ nanotubular layer with a layer thicknesses greater than 45 μm was able to show the most efficient nitrate reduction.

Ni-doped and Ni/Cr co-doped TiO2 nanotubes for enhancement of photocatalytic degradation of methylene blue

Ni-doped and Ni/Cr co-doped TiO₂ nanotubes were successfully synthesized using a novel hydrothermal method. The surface and bulk properties of as-synthesized nanopowders were characterized using various microstructural and optical techniques. The photocatalytic ability of these nanopowders was investigated systematically for the decomposition of methylene blue dye (MB) under visible light illumination. The morphological results revealed the structural transformation of TiO₂ nanotubes to nanosheets, and further to a mixture of nanosheet/nanotube on doping with Ni and co-doping of Ni/Cr, respectively. Moreover, the Ni doping causes an optical absorption edge shifts towards lower wavelengths, while doping by Ni/Cr results to an optical absorption edge shifts towards higher wavelength in comparison to TiO₂-nanotubes. Also, Ni-doping and Ni/Cr co-doping strongly affects the Raman vibrational modes owing to the changes in interplanar distance, crystallite size, dislocation density, and crystal microstrains. Among the undoped, doped and co-doped TiO₂ nanoparticles, the 6Ni/4Cr co-doped TiO₂ exhibited a higher efficiency of 95.6% and excellent stability towards the photocatalytic degradation of MB. It is attributed to the availability of many carriers for the efficient photo-oxidation within the UV-Vis optical absorption range. Also, the photocatalytic reaction kinetics and degradation mechanism of MB were discussed.

Immobilization-free photoelectrochemical aptasensor for environmental pollutants: Design, fabrication and mechanism

Atrazine (ATZ) is one of the most widely used and highly toxic triazine herbicides in the world. Photoelectrochemical (PEC) method is an attractive and sensitive alternate for ATZ. However, for conventional PEC sensors, recognition elements usually need to immobilize on electrode surface, where a complex procedure is unavoidable and the reproducibility of sensors fabrication is usually poor. Therefore, we herein proposed a new and feasible strategy for developing a signal-on immobilization-free PEC aptasensor to ATZ. Aptamer for ATZ is combined with graphene to obtain APT-GN complex, serving as the recognition element in solution. TiO₂ nanotubes (NTs) electrode deposited with Au nanoparticles (NPs) is used as the substrate electrode. After further self-assembled with 1-Mercaptooctane (MCT), the photo-generated carriers transfer between the resultant electrode and the electrolyte will be blocked, leading to a signal-off of the photocurrent. But when sensing ATZ, aptamers on APT-GN will be grasped by ATZ, leaving free graphene to assemble onto MCT/Au NPs/TiO₂ NTs, which will largely "turn on" the photocurrent response of the substrate electrode due to the efficient carrier transport efficiency of graphene. Meanwhile, simultaneous addition of deoxyribonuclease I (DNase I) can bring about further cycling amplification of the signal enhancement. The as-designed PEC aptasensor exhibits a linear range from 50.0 fM to 0.3 nM with detection limit of 12.0 fM for ATZ. Since the reaction of recognition elements and targets ATZ occurs in homogeneous solution rather than on the photoelectrode surface, this PEC aptasensor exhibits advantages of high stability, anti-interference ability, reproducibility, and wide pH and ion strength feasibility range. A promising immobilization-free aptasensing platform has thus been provided not only for ATZ but also for other kinds of environmental pollutants.

SnO2/TiO2 nanotube heterojunction: The first investigation of NO degradation by visible light-driven photocatalysis

Titania (TiO₂) as a commercial photocatalyst has been continually struggling due to the limitation of ultraviolet light response and the high recombination rate of photoinduced carriers. The development of heterojunction nanostructures provides great promise to achieve the activation by visible light and suppress the photoinduced electron-hole pairs recombination. Herein, we synthesized a SnO₂ and TiO₂ nanotube heterojunction (SnO₂/TNT) via a one-step hydrothermal strategy and systematically investigated NO photocatalytic degradation over the SnO₂/TNTs heterojunction under visible light at the parts per billion level. Various physicochemical characterization techniques were conducted to verify the physical and chemical properties of the materials. For example, the morphology and lattice spacings of the materials were examined by high-resolution TEM (HR-TEM) images and selected area electron diffraction (SAED) pattern, X-ray photoelectron spectroscopy (XPS) was employed to study the oxidation states and propose the band alignment diagram of the SnO₂/TNTs heterojunction, and photoluminescence spectroscopy was employed for understanding of carrier's trapping, migration and transfer. The photocatalytic results show that the SnO₂/TNTs heterojunction exhibits the superior photocatalytic performance, and the photocatalytic degradation efficiency of NO can reach 60% under visible light with effective inhibition of NO₂ production. The excellent photocatalytic ability is due to the low recombination rate of the photoinduced electron-hole pairs. Furthermore, a trapping experiment was combined with electron spin resonance (ESR) and utilized to identify the involvement of reactive radicals in the photocatalysis process suggesting that and OH mediated pathways play a predominant role in NO removal.

Poly(lactic-co-glycolic acid)(PLGA)/TiO2 nanotube bioactive composite as a novel scaffold for bone tissue engineering: In vitro and in vivo studies

The aim of this study was to synthesize and characterize novel three-dimensional porous scaffolds made of poly (lactic-co-glycolic acid)/TiO₂ nanotube (TNT) composite microspheres for bone tissue engineering applications. The incorporation of TNT greatly increases mechanical properties of PLGA/TNT microsphere-sintered scaffold. The experimental results exhibit that the PLGA/0.5 wt% TNT scaffold sintered at 100 °C for 3 h showed the best mechanical properties and a proper pore structure for tissue engineering. Biodegradation test ascertained that the weight of both PLGA and PLGA/PLGA/0.5 wt% TiO₂ nanotube composites slightly reduced during the first 4 weeks following immersion in SBF solution. Moreover, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and alkaline phosphatase activity (ALP activity) results represent increased cell viability for PLGA/0.5%TNT composite scaffold in comparison to the control group. In vivo studies show the amount of bone formation for PLGA/TNT was approximately twice of pure PLGA. Vivid histologic images of the newly generated bone on the implants further supported our test results. Eventually, a mathematical model showed that both PLGA and PLGA/TNT scaffolds' mechanical properties follow an exponential trend with time as their degradation occurs. By a three-dimensional finite element model, a more monotonous distribution of stress was present in the scaffold due to the presence of TNT with a reduction in maximum stress on bone.

Fabrication, characterization and photoelectrochemical activity of tungsten-copper co-sensitized TiO2 nanotube composite photoanodes

Tungsten-copper co-sensitized TiO₂ nanotube films on titanium substrate, used as photoanodes in photoelectrochemical (PEC) water splitting to produce hydrogen, have been synthesized via anodization and chemical bath deposition (CBD) methods. Field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) were used to study the morphology and elemental composition of the synthetic samples. UV-Vis diffuse reflection spectroscopy (UV-Vis DRS) was sued to investigate the optical features of the samples. The impact of copper and tungsten ratio on the photocatalytic behavior of co-sensitized TiO₂ nanotube photoelectrodes in PEC water splitting has been investigated. High photocatalytic activity has been exhibited by the co-sensitized TiO₂ nanotube samples due to the synergistic effects of the copper and tungsten. Sample T4 had the highest photoelectrochemical activity compared with other samples. In addition, this sample exhibited outstanding photochemical stability even after four runs in the photocatalytic test. A simple method for the synthesis of high performance co-sensitized TiO₂ nanotube photocatalysts for application in solar energy conversion has thus been proposed in this work. The advantages of these new photoanodes for practical applications are low cost, ease of synthesis, high activity in visible light and excellent stability.

OH radical generation in a photocatalytic reactor using TiO2 nanotube plates

In order to use TiO2 nanotubes grown on a Ti plate as a photocatalyst, self-organized oxide nanotube layers were grown by anodization in a glycerol based electrolyte. The ultimate conditions for the synthesis of the TiO2 nanotube array on the Ti plate were investigated by comparing the morphology, length, and inner diameter of the nanotubes. They were significantly affected by the applied anodic voltage, anodization time, and composition of the electrolyte such as the water and fluoride ion concentration. The crystallographic structures of TiO2 nanotubes before and after annealing were compared. The photocatalytic reactor used in this study consisted of two parallel and closely spaced TiO2 nanotube plates. The plates were squares while a UV lamp was inserted perpendicularly to them. OH radical generation in the photocatalytic reactor was monitored by using a probe compound, parachlorobenzoate (pCBA). The steady state OH radical concentration was compared depending on the length of nanotubes and crystallographic structure. The longer the nanotubes, the higher the steady state OH radical concentration.

A novel drug delivery of 5-fluorouracil device based on TiO2/ZnS nanotubes

The structural and electronic properties of titanium oxide nanotubes (TiO2) have attracted considerable attention for the development of therapeutic devices and imaging probes for nanomedicine. However, the fluorescence response of TiO2 has typically been within ultraviolet spectrum. In this study, the surface modification of TiO2 nanotubes with ZnS quantum dots was found to produce a red shift in the ultra violet emission band. The TiO2 nanotubes used in this work were obtained by sol-gel template synthesis. The ZnS quantum dots were deposited onto TiO2 nanotube surface by a micelle-template inducing reaction. The structure and morphology of the resulting hybrid TiO2/ZnS nanotubes were investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. According to the results of fluorescence spectroscopy, pure TiO2 nanotubes exhibited a high emission at 380nm (3.26eV), whereas TiO2/ZnS exhibited an emission at 410nm (3.02eV). The TiO2/ZnS nanotubes demonstrated good bio-imaging ability on sycamore cultured plant cells. The biocompatibility against mammalian cells (Chinese Hamster Ovarian Cells-CHO) suggesting that TiO2/ZnS may also have suitable optical properties for use as biological markers in diagnostic medicine. The drug release characteristic of TiO2/ZnS nanotubes was explored using 5-fluorouracil (5-FU), an anticancer drug used in photodynamic therapy. The results show that the TiO2/ZnS nanotubes are a promising candidate for anticancer drug delivery systems.

Enhanced photocatalytic performance of N-nitrosodimethylamine on TiO2 nanotube based on the role of singlet oxygen

N-nitrosodimethylamine (NDMA) photocatalytic degradation performance and mechanism were investigated on the TiO2 nanotube prepared from anatase TiO2 nanopowder in terms of the production of reactive oxygen species including hydroxyl radical, singlet oxygen and superoxide radical. Significantly higher NDMA degradation efficiency was obtained on anatase TiO2 nanotube rather than anatase TiO2 nanopowder. The tubular morphology may be responsible for almost 100% NDMA removal on TiO2 nanotube, presumably due to its confinement effect leading to NDMA molecules within the nanotube being attacked by reactive oxygen species such as hydroxyl radical and singlet oxygen, and initiating reaction inside the nanotube. In particular, the ability of the nanotubular structure of TiO2 nanotube to promote a singlet oxygen oxidation pathway contributes much to the enhanced NDMA degradation efficiency and favors the formation of dimethylamine and NO3(-). Such function originating from nanotube morphology could bring new insights for the photocatalytic degradation of organic pollutants.

Titanium dioxide nanotube films: Preparation, characterization and electrochemical biosensitivity towards alkaline phosphatase

Titania nanotubes (TNTs) were prepared by anodization on different substrates (titanium, Ti6Al4V and Ti6Al7Nb alloys) in ethylene glycol and glycerol. The influence of the applied potential and processing time on the nanotube diameter and length is analyzed. The as-formed nanotube layers are amorphous but they become crystalline when subjected to subsequent thermal treatment in air at 550°C; TNT layers grown on titanium and Ti6Al4V alloy substrates consist of anatase and rutile, while those grown on Ti6Al7Nb alloy consist only of anatase. The nanotube layers grown on Ti6Al7Nb alloy are less homogeneous, with supplementary islands of smaller diameter nanotubes, spread across the surface. Better adhesion and proliferation of osteoblasts was found for the nanotubes grown on all three substrates by comparison to an unprocessed titanium plate. The sensitivity towards bovine alkaline phosphatase was investigated mainly by electrochemical impedance spectroscopy in relation to the crystallinity, the diameter and the nature of the anodization electrolyte of the TNT/Ti samples. The measuring capacity of the annealed nanotubes of 50nm diameter grown in glycerol was demonstrated and the corresponding calibration curve was built for the concentration range of 0.005-0.1mg/mL.

Fabrication of thin film TiO2 nanotube arrays on Co-28Cr-6Mo alloy by anodization

Titanium oxide (TiO2) nanotube arrays were prepared by anodization of Ti/Au/Ti trilayer thin film DC sputtered onto forged and cast Co-28Cr-6Mo alloy substrate at 400 °C. Two different types of deposited film structures (Ti/Au/Ti trilayer and Ti monolayer), and two deposition temperatures (room temperature and 400 °C) were compared in this work. The concentrations of ammonium fluoride (NH4F) and H2O in glycerol electrolyte were varied to study their effect on the formation of TiO2 nanotube arrays on a forged and cast Co-28Cr-6Mo alloy. The results show that Ti/Au/Ti trilayer thin film and elevated temperature sputtered films are favorable for the formation of well-ordered nanotube arrays. The optimized electrolyte concentration for the growth of TiO2 nanotube arrays on forged and cast Co-28Cr-6Mo alloy was obtained. This work contains meaningful results for the application of a TiO2 nanotube coating to a CoCr alloy implant for potential next-generation orthopedic implant surface coatings with improved osseointegrative capabilities.