Confined Carbon Mediating Dehydroaromatization of Methane over Mo/ZSM-5

Green synthesis of solketal from glycerol using metal-modified ZSM-5 zeolite catalysts: process optimization

This study investigates the production of solketal (2,2-dimethyl-1,3-dioxolane-4-methanol) from glycerol via ketalization reaction using M-ZSM-5 catalysts (M = Fe, Co, Ni, Cu, and Zn). The wet impregnation method ensured precise metal loading and versatility in catalyst preparation. We present a novel approach by employing a suite of characterization techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), Thermogravimetric analysis (TGA), and Field-emission scanning electron microscopy (FE-SEM), to elucidate the catalyst's structure, bonding, surface area, thermal stability, and morphology, ultimately linking these properties to their performance. Solketal synthesis was optimized in a reactor, with parameters like temperature, glycerol:acetone molar ratio, catalyst amount, reaction time, and stirring speed. Optimal conditions were identified as 60 °C, 1:4, 0.2 g, 60 min, and 1200 rpm, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis confirmed successful solketal formation. Among M-ZSM-5 catalysts tested, Cu-ZSM-5 emerged the most efficient, achieving an impressive 99% glycerol conversion and 96% solketal selectivity. Notably, Cu-ZSM-5 catalyst displayed exceptional reusability, regaining its initial activity through calcination, thus minimizing waste generation. This research unveils Cu-ZSM-5 as a highly efficient catalyst and promotes sustainability by utilizing a renewable glycerol feedstock to produce valuable solketal with applications in fuel additives, solvents, and pharmaceuticals. This work paves the way for developing environmentally friendly processes for waste valorization and producing valuable bio-based chemicals.

Time-, space- and energy-resolved in situ characterization of catalysts by X-ray absorption spectroscopy

A setup for dispersive X-ray absorption spectroscopy (XAS) with spatial, temporal and energy resolution is presented. Through investigation of a Mo/HZSM-5 catalyst during the dehydroaromatization of methane we observed a reduction gradient along the packed bed. Our new method represents an unprecedented addition to the analytical toolbox for in situ characterizations.

Structure Sensitivity of CO2 Hydrogenation on Ni Revisited

Despite the large number of studies on the catalytic hydrogenation of CO2 to CO and hydrocarbons by metal nanoparticles, the nature of the active sites and the reaction mechanism have remained unresolved. This hampers the development of effective catalysts relevant to energy storage. By investigating the structure sensitivity of CO2 hydrogenation on a set of silica-supported Ni nanoparticle catalysts (2-12 nm), we found that the active sites responsible for the conversion of CO2 to CO are different from those for the subsequent hydrogenation of CO to CH4. While the former reaction step is weakly dependent on the nanoparticle size, the latter is strongly structure sensitive with particles below 5 nm losing their methanation activity. Operando X-ray diffraction and X-ray absorption spectroscopy results showed that significant oxidation or restructuring, which could be responsible for the observed differences in CO2 hydrogenation rates, was absent. Instead, the decreased methanation activity and the related higher CO selectivity on small nanoparticles was linked to a lower availability of step edges that are active for CO dissociation. Operando infrared spectroscopy coupled with (isotopic) transient experiments revealed the dynamics of surface species on the Ni surface during CO2 hydrogenation and demonstrated that direct dissociation of CO2 to CO is followed by the conversion of strongly bonded carbonyls to CH4. These findings provide essential insights into the much debated structure sensitivity of CO2 hydrogenation reactions and are key for the knowledge-driven design of highly active and selective catalysts.

Methyl radical chemistry in non-oxidative methane activation over metal single sites

Molybdenum supported on zeolites has been extensively studied as a catalyst for methane dehydroaromatization. Despite significant progress, the actual intermediates and particularly the first C-C bond formation have not yet been elucidated. Herein we report evolution of methyl radicals during non-oxidative methane activation over molybdenum single sites, which leads selectively to value-added chemicals. Operando X-ray absorption spectroscopy and online synchrotron vacuum ultraviolet photoionization mass spectroscopy in combination with electron microscopy and density functional theory calculations reveal the essential role of molybdenum single sites in the generation of methyl radicals and that the formation rate of methyl radicals is linearly correlated with the number of molybdenum single sites. Methyl radicals transform to ethane in the gas phase, which readily dehydrogenates to ethylene in the absence of zeolites. This is essentially similar to the reaction pathway over the previously reported SiO2 lattice-confined single site iron catalyst. However, the availability of a zeolite, either in a physical mixture or as a support, directs the subsequent reaction pathway towards aromatization within the zeolite confined pores, resulting in benzene as the dominant hydrocarbon product. The findings reveal that methyl radical chemistry could be a general feature for metal single site catalysis regardless of the support (either zeolites MCM-22 and ZSM-5 or SiO2) whereas the reaction over aggregated molybdenum carbide nanoparticles likely facilitates carbon deposition through surface C-C coupling. These findings allow furthering the fundamental insights into non-oxidative methane conversion to value-added chemicals.

Methane dehydroaromatization catalyzed by Mo/ZSM-5: location-steered activity and mechanism

This work examined the location-steered catalytic behavior of Mo/ZSM-5 catalyst for one-step methane dehydroaromatization to benzene reaction. The results indicated that α-site is the preferred location for the formation of ethylene, the main intermediate for aromatics production via the propagation pathway, while δ-site is favorable for the hydrocarbon pool aggregation reaction pathway.

Understanding W/H-ZSM-5 catalysts for the dehydroaromatization of methane

Tungsten is the most interesting and promising metal to replace molybdenum in methane dehydroaromatization (MDA) catalysis.

Metal Sites in Zeolites: Synthesis, Characterization, and Catalysis

Zeolites with ordered microporous systems, distinct framework topologies, good spatial nanoconfinement effects, and superior (hydro)thermal stability are an ideal scaffold for planting diverse active metal species, including single sites, clusters, and nanoparticles in the framework and framework-associated sites and extra-framework positions, thus affording the metal-in-zeolite catalysts outstanding activity, unique shape selectivity, and enhanced stability and recyclability in the processes of Brønsted acid-, Lewis acid-, and extra-framework metal-catalyzed reactions. Especially, thanks to the advances in zeolite synthesis and characterization techniques in recent years, zeolite-confined extra-framework metal catalysts (denoted as metal@zeolite composites) have experienced rapid development in heterogeneous catalysis, owing to the combination of the merits of both active metal sites and zeolite intrinsic properties. In this review, we will present the recent developments of synthesis strategies for incorporating and tailoring of active metal sites in zeolites and advanced characterization techniques for identification of the location, distribution, and coordination environment of metal species in zeolites. Furthermore, the catalytic applications of metal-in-zeolite catalysts are demonstrated, with an emphasis on the metal@zeolite composites in hydrogenation, dehydrogenation, and oxidation reactions. Finally, we point out the current challenges and future perspectives on precise synthesis, atomic level identification, and practical application of the metal-in-zeolite catalyst system.

First-Generation Organic Reaction Intermediates in Zeolite Chemistry and Catalysis

Zeolite chemistry and catalysis are expected to play a decisive role in the next decade(s) to build a more decentralized renewable feedstock-dependent sustainable society owing to the increased scrutiny over carbon emissions. Therefore, the lack of fundamental and mechanistic understanding of these processes is a critical "technical bottleneck" that must be eliminated to maximize economic value and minimize waste. We have identified, considering this objective, that the chemistry related to the first-generation reaction intermediates (i.e., carbocations, radicals, carbenes, ketenes, and carbanions) in zeolite chemistry and catalysis is highly underdeveloped or undervalued compared to other catalysis streams (e.g., homogeneous catalysis). This limitation can often be attributed to the technological restrictions to detect such "short-lived and highly reactive" intermediates at the interface (gas-solid/solid-liquid); however, the recent rise of sophisticated spectroscopic/analytical techniques (including under in situ/operando conditions) and modern data analysis methods collectively compete to unravel the impact of these organic intermediates. This comprehensive review summarizes the state-of-the-art first-generation organic reaction intermediates in zeolite chemistry and catalysis and evaluates their existing challenges and future prospects, to contribute significantly to the "circular carbon economy" initiatives.

MoO3-modified SAPO-34 for photocatalytic nonoxidative coupling of methane

The synergistic effect of the acidity of SAPO-34 and metal-centered sites of MoO3 enhanced the activation of the C–H bond. Regulating the formation of catalytic sites and the acidity of catalysts are critical to improving the activity and stability.

Understanding the Preparation and Reactivity of Mo/ZSM-5 Methane Dehydroaromatization Catalysts

Methane dehydroaromatization is a promising reaction for the direct conversion of methane to liquid hydrocarbons. The active sites and the mechanism of this reaction remain controversial. This work is focused on the operando X‐ray absorption near edge structure spectroscopy analysis of conventional Mo/ZSM‐5 catalysts during their whole lifetime. Complemented by other characterization techniques, we derived spectroscopic descriptors of molybdenum precursor decomposition and its exchange with zeolite Brønsted acid sites. We found that the reduction of Mo‐species proceeds in two steps and the active sites are of similar nature, regardless of the Mo content. Furthermore, the ZSM‐5 unit cell contracts at the beginning of the reaction, which coincides with benzene formation and it is likely related to the formation of hydrocarbon pool intermediates. Finally, although reductive regeneration of used catalysts via methanation is less effective as compared to combustion of coke, it does not affect the structure of the catalysts.

Unraveling Hydrocarbon Pool Boosted Propane Aromatization on Gallium/ZSM-5 Zeolite by Solid-State Nuclear Magnetic Resonance Spectroscopy

Propane aromatization on metal-modified zeolites provides a promising route to produce valuable chemicals such as benzene, toluene and xylene via non-petroleum feedstocks. The mechanistic understanding of propane conversion to aromatics is still challenging due to the complexity of the aromatization process. Herein, by using solid-state NMR spectroscopy and GC-MS, it is shown that cyclopentenyl cations are formed as active intermediates during propane aromatization on Ga/ZSM-5 zeolite. Autocatalysis of propane to aromatics is identified in the induction period. The cyclopentenyl cations serve as key hydrocarbon pool species to co-catalyze propane conversion and promote aromatics formation, revealing a dominant hydrocarbon pool process in propane aromatization.

Activation and conversion of alkanes in the confined space of zeolite-type materials

Microporous zeolite-type materials, with crystalline porous structures formed by well-defined channels and cages of molecular dimensions, have been widely employed as heterogeneous catalysts since the early 1960s, due to their wide variety of framework topologies, compositional flexibility and hydrothermal stability. The possible selection of the microporous structure and of the elements located in framework and extraframework positions enables the design of highly selective catalysts with well-defined active sites of acidic, basic or redox character, opening the path to their application in a wide range of catalytic processes. This versatility and high catalytic efficiency is the key factor enabling their use in the activation and conversion of different alkanes, ranging from methane to long chain n-paraffins. Alkanes are highly stable molecules, but their abundance and low cost have been two main driving forces for the development of processes directed to their upgrading over the last 50 years. However, the availability of advanced characterization tools combined with molecular modelling has enabled a more fundamental approach to the activation and conversion of alkanes, with most of the recent research being focused on the functionalization of methane and light alkanes, where their selective transformation at reasonable conversions remains, even nowadays, an important challenge. In this review, we will cover the use of microporous zeolite-type materials as components of mono- and bifunctional catalysts in the catalytic activation and conversion of C₁⁺ alkanes under non-oxidative or oxidative conditions. In each case, the alkane activation will be approached from a fundamental perspective, with the aim of understanding, at the molecular level, the role of the active sites involved in the activation and transformation of the different molecules and the contribution of shape-selective or confinement effects imposed by the microporous structure.

Dual Active Sites on Molybdenum/ZSM-5 Catalyst for Methane Dehydroaromatization: Insights from Solid-State NMR Spectroscopy

Methane dehydroaromatization (MDA) on Mo/ZSM-5 zeolite catalyst is promising for direct transformation of natural gas. Understanding the nature of active sites on Mo/ZSM-5 is a challenge for applications. Herein, using 1 H{95 Mo} double-resonance solid-state NMR spectroscopy, we identify proximate dual active sites on Mo/ZSM-5 catalyst by direct observation of internuclear spatial interaction between Brønsted acid site and Mo species in zeolite channels. The acidic proton-Mo spatial interaction is correlated with methane conversion and aromatics formation in the MDA process, an important factor in determining the catalyst activity and lifetime. The evolution of olefins and aromatics in Mo/ZSM-5 channels is monitored by detecting their host-guest interactions with both active Mo sites and Brønsted acid sites via 1 H{95 Mo} double-resonance and two-dimensional 1 H-1 H correlation NMR spectroscopy, revealing the intermediate role of olefins in hydrocarbon pool process during the MDA reaction.

Selective methanethiol-to-olefins conversion over HSSZ-13 zeolite

A methanethiol-to-olefins (MtTO) equivalent of methanol-to-olefins (MTO) chemistry is demonstrated. CH₃SH can be converted to ethylene and propylene in a similar manner as CH₃OH over SSZ-13 zeolite involving a hydrocarbon pool mechansim. Methylated aromatic intermediates were identified by ¹³C NMR analysis. Comparison of MtTO and MTO chemistry provides clues about the mechanism of C-C bond formation and catalyst deactivation.

Transformation of Dilute Ethylene at High Temperature on Micro- and Nano-Sized H-ZSM-5 Zeolites

Ethylene dehydroaromatisation (EDA) was investigated at 700 °C under 1 bar of ethylene (5 mol% in N2) over a micro-(M) and a nano-sized (N) H-ZSM-5. On the M zeolite an induction period followed by deactivation was observed, which could be related to the presence of long diffusion path lengths in this sample, leading to mass transfer resistance. During the induction step, the aromatics yield increases, despite a significant loss of the acid site concentration as a result of coking. This induction period corresponds to the formation of an active hydrocarbon pool (HCP) composed of units of 2 to 5 aromatic rings with a molecular weight ranging from 130 to 220 g mol−1 (light coke). A kinetic study revealed that the developing HCP species is two times more active than Brønsted acid sites in the fresh zeolite. Diffusion limitations yet impact the product desorption by promoting coke growth and, therefore the deactivation of the HCP and hence of the catalyst. From MA-LDI/LDI-TOF MS (Matrix Assisted Laser Desorption Ionization—Time of Flight Mass Spectroscopy) characterisation was deduced that even after complete catalyst deactivation, the as-deposited coke continues growing at the external surface of the zeolite by condensation reactions, thus leading to heavy coke composed of more than 100 carbon atoms and a molar mass exceeding 1300 g mol−1. Unlike the micro-sized zeolite, the nano-scaled zeolite features a short diffusion path length and promotes fast formation of the active HCP. As a result, higher activity and selectivity into benzene were observed, whilst catalyst deactivation was significantly mitigated.

Status and prospects of the decentralised valorisation of natural gas into energy and energy carriers

We critically review the recent advances in process, reactor, and catalyst design that enable process miniaturisation for decentralised natural gas upgrading into electricity, liquefied natural gas, fuels and chemicals.

Elucidating the nature of Mo species on ZSM-5 and its role in the methane aromatization reaction

The valorization of methane is one of the most important goals during the transition period to the general use of renewable energies.

Reactivity, Selectivity, and Stability of Zeolite-Based Catalysts for Methane Dehydroaromatization

Non-oxidative dehydroaromatization is arguably the most promising process for the direct upgrading of cheap and abundant methane to liquid hydrocarbons. This reaction has not been commercialized yet because of the suboptimal activity and swift deactivation of benchmark Mo-zeolite catalysts. This progress report represents an elaboration on the recent developments in understanding of zeolite-based catalytic materials for high-temperature non-oxidative dehydroaromatization of methane. It is specifically focused on recent studies, relevant to the materials chemistry and elucidating i) the structure of active species in working catalysts; ii) the complex molecular pathways underlying the mechanism of selective conversion of methane to benzene; iii) structure, evolution and role of coke species; and iv) process intensification strategies to improve the deactivation resistance and overall performance of the catalysts. Finally, unsolved challenges in this field of research are outlined and an outlook is provided on promising directions toward improving the activity, stability, and selectivity of methane dehydroaromatization catalysts.

Applications of Zeolites to C1 Chemistry: Recent Advances, Challenges, and Opportunities

C1 chemistry, which is the catalytic transformation of C1 molecules including CO, CO₂ , CH₄ , CH₃ OH, and HCOOH, plays an important role in providing energy and chemical supplies while meeting environmental requirements. Zeolites are highly efficient solid catalysts used in the chemical industry. The design and development of zeolite-based mono-, bi-, and multifunctional catalysts has led to a booming application of zeolite-based catalysts to C1 chemistry. Combining the advantages of zeolites and metallic catalytic species has promoted the catalytic production of various hydrocarbons (e.g., methane, light olefins, aromatics, and liquid fuels) and oxygenates (e.g., methanol, dimethyl ether, formic acid, and higher alcohols) from C1 molecules. The key zeolite descriptors that influence catalytic performance, such as framework topologies, nanoconfinement effects, Brønsted acidities, secondary-pore systems, particle sizes, extraframework cations and atoms, hydrophobicity and hydrophilicity, and proximity between acid and metallic sites are discussed to provide a deep understanding of the significance of zeolites to C1 chemistry. An outlook regarding challenges and opportunities for the conversion of C1 resources using zeolite-based catalysts to meet emerging energy and environmental demands is also presented.

Understanding the Deactivation Phenomena of Small-Pore Mo/H-SSZ-13 during Methane Dehydroaromatisation

Small pore zeolites have shown great potential in a number of catalytic reactions. While Mo-containing medium pore zeolites have been widely studied for methane dehydroaromatisation (MDA), the use of small pore supports has drawn limited attention due to the fast deactivation of the catalyst. This work investigates the structure of the small pore Mo/H-SSZ-13 during catalyst preparation and reaction by operando X-ray absorption spectroscopy (XAS), in situ synchrotron powder diffraction (SPD), and electron microscopy; then, the results are compared with the medium pore Mo/H-ZSM-5. While SPD suggests that during catalyst preparation, part of the MoO_x anchors inside the pores, Mo dispersion and subsequent ion exchange was less effective in the small pore catalyst, resulting in the formation of mesopores and Al₂(M_OO₄)₃ particles. Unlike Mo/H-ZSM-5, part of the Mo species in Mo/H-SSZ-13 undergoes full reduction to Mo⁰ during MDA, whereas characterisation of the spent catalyst indicates that differences also exist in the nature of the formed carbon deposits. Hence, the different Mo speciation and the low performance on small pore zeolites can be attributed to mesopores formation during calcination and the ineffective ion exchange into well dispersed Mo-oxo sites. The results open the scope for the optimisation of synthetic routes to explore the potential of small pore topologies.

Revival of Zeolite-Templated Nanocarbon Materials: Recent Advances in Energy Storage and Conversion

Nanocarbon materials represent one of the hottest topics in physics, chemistry, and materials science. Preparation of nanocarbon materials by zeolite templates has been developing for more than 20 years. In recent years, novel structures and properties of zeolite-templated nanocarbons have been evolving and new applications are emerging in the realm of energy storage and conversion. Here, recent progress of zeolite-templated nanocarbons in advanced synthetic techniques, emerging properties, and novel applications is summarized: i) thanks to the diversity of zeolites, the structures of the corresponding nanocarbons are multitudinous; ii) by various synthetic techniques, novel properties of zeolite-templated nanocarbons can be achieved, such as hierarchical porosity, heteroatom doping, and nanoparticle loading capacity; iii) the applications of zeolite-templated nanocarbons are also evolving from traditional gas/vapor adsorption to advanced energy storage techniques including Li-ion batteries, Li-S batteries, fuel cells, metal-O2 batteries, etc. Finally, a perspective is provided to forecast the future development of zeolite-templated nanocarbon materials.

Catalytic conversion of ethane to valuable products through non-oxidative dehydrogenation and dehydroaromatization

Chemical utilization of ethane to produce valuable chemicals has become especially attractive since the expanded utilization of shale gas in the United States and associated petroleum gas in the Middle East. Catalytic conversion to ethylene and aromatic hydrocarbons through non-oxidative dehydrogenation and dehydroaromatization of ethane (EDH and EDA) are potentially beneficial technologies because of their high selectivity to products. The former represents an attractive alternative to conventional thermal cracking of ethane. The latter can produce valuable aromatic hydrocarbons from a cheap feedstock. Nevertheless, further progress in catalytic science and technology is indispensable to implement these processes beneficially. This review summarizes progress that has been achieved with non-oxidative EDH and EDA in terms of the nature of active sites and reaction mechanisms. Briefly, platinum-, chromium- and gallium-based catalysts have been introduced mainly for EDH, including effects of carbon dioxide co-feeding. Efforts to use EDA have emphasized zinc-modified MFI zeolite catalysts. Finally, some avenues for development of catalytic science and technology for ethane conversion are summarized.

High-Impact Promotional Effect of Mo Impregnation on Aluminum-Rich and Alkali-Treated Hierarchical Zeolite Catalysts on Methanol Aromatization

A systematic change of HZSM-5 (HZ5) as a catalyst of the methanol to aromatics (MTA) reaction was undertaken by employing a fixed-bed tubular-type reactor under ambient pressure, applying a weight hourly space velocity (WHSV) of 2 h^-1 at 375 °C, as the first report on the application of low-Si/Al-ratio alkaline-[Mo,Na]-HZSM-5 in the MTA process. To characterize the surface and textural properties of the catalysts, powder X-ray diffraction (PXRD), nitrogen adsorption/desorption, temperature-programmed desorption of ammonia (NH₃-TPD), pyridine-infrared spectroscopy (Py-IR), thermogravimetric analysis (TGA), and energy-dispersive X-ray (EDX) methods were employed. Gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) measurements demonstrated a selectivity of up to 86 wt % (65.7 wt % for benzene, toluene, and xylene (BTX)) over 2[Mo]HZ5. NH₃-TPD and Py-IR results indicated a sensible decrease of strong acid sites on the impregnated samples, while the surface analyses revealed the highest Lewis acid sites (LAS) together with the largest mesopore surface area for 2[Mo]alk-HZ5, supporting the migration of Mo species to the bulk of the catalysts. Mo impregnation had a minor effect on the observed coke formation in the promoted catalyst.

Highly selective and stable Zn–Fe/ZSM-5 catalyst for aromatization of propane

Light alkane aromatization for aromatic compound production, used in petrochemical industries is an attractive area of research. The effect of second metal co-impregnation was investigated in stabilizing zinc on ZSM-5 in aromatization of propane. HZSM-5 was modified with zinc and iron metal by co wet-impregnation and characterized using XRF, XRD, BET, N2-adsorption, FTIR, FTIR-Pyridine, SEM, TEM, H2-TPR and XPS. The effect of different loadings of Iron on Zn/ZSM-5 was investigated on acidity, aromatic yield, product distribution and aromatization performance. Performance test was conducted in a fixed bed reactor at 540 °C, one atmosphere. GHSV of 1200 mL/g-h. Co-impregnation of Zn with Fe improved the catalytic activity and aromatic yield for 10 h time on stream as compared to parent HZSM-5 and Zn/ZSM-5 of very low aromatic yield and propane conversion. Impregnation of Zn as the dehydrogenating metal on HZSM-5 steadily increased aromatic yield from 5% on HZSM-5 to 25% and was steadily dropped to 20% after 10 h TOS. The co-impregnation of iron of 1–3 wt% loading as the second metal for zinc stability with 2 wt% Zn on ZSM-5 improved propane conversion and aromatic yield to 55% for the 10 h TOS. This further enhanced aromatic product distribution and minimized light gases.

Enhancing low-temperature methane conversion on Zn/ZSM-5 in the presence of methanol by regulating the methanol-to-aromatics reaction pathway

The co-reaction method provides an efficient strategy for methane conversion under mild conditions, which is of urgent importance for direct valorization of natural gas to liquid hydrocarbons.