Activation of Ga Liquid Catalyst with Continuously Exposed Active Sites for Electrocatalytic C-N Coupling

Environmentally friendly electrocatalytic coupling of CO2 and N2 for urea synthesis is a promising strategy. However, it is still facing problems such as low yield as well as low stability. Here, a new carbon-coated liquid alloy catalyst, Ga79Cu11Mo10@C is designed for efficient electrochemical urea synthesis by activating Ga active sites. During the N2 and CO2 co-reduction process, the yield of urea reaches 28.25 mmol h-1 g-1, which is the highest yield reported so far under the same conditions, the Faraday efficiency (FE) is also as high as 60.6 % at -0.4 V vs. RHE. In addition, the catalyst shows excellent stability under 100 h of testing. Comprehensive analyses showed that sequential exposure of a high density of active sites promoted the adsorption and activation of N2 and CO2 for efficient coupling reactions. This coupling reaction occurs through a thermodynamic spontaneous reaction between *N=N* and CO to form a C-N bond. The deformability of the liquid state facilitates catalyst recovery and enhances stability and resistance to poisoning. Moreover, the introduction of Cu and Mo stimulates the Ga active sites, which successfully synthesises the *NCON* intermediate. The reaction energy barrier of the third proton-coupled electron transfer process rate-determining step (RDS) *NHCONH→*NHCONH2 was lowered, ensuring the efficient synthesis of urea.

Unraveling the Evolution of Dynamic Active Sites of LaNixFe1-xO3 Catalysts During OER

Perovskites have attracted tremendous attention as potential catalysts for the oxygen evolution reaction (OER). It is well-known that the introduction of Fe into rare earth perovskites such as LaNiO3 enhances the intrinsic OER activity. Despite numerous studies on structure-property relationships, the origin of the activity and the nature of the active species are still elusive and unclear. In this work, we study a series of LaNixFe1-xO3 perovskites using in situ electrochemical surface-enhanced Raman spectroscopy and electron energy loss spectroscopy to decipher the surface evolution and formation of active species during OER. While the origin of the activity arises from NiOOH species formed from the active Ni centers in LaNiO3, our work shows that Fe serves as the active center in LaNi0.5Fe0.5O3 and forms Fe-O-Ni and FeOOH species during OER. The OER activity of LaFeO3 originates from FeOOH species, which interact with the soluble Ni species in the electrolyte forming an active electrode-electrolyte interface with high-valent stable surface iron species (Fe4+) and thereby improving the performance. Our work provides deeper insights into the synergistic effects of Ni and Fe on the catalytic activity, which in turn provides new design principles for perovskite catalysts for the OER.

Positional Thiophene Isomerization: A Geometric Strategy for Precisely Regulating the Electronic State of Covalent Organic Frameworks to Boost Oxygen Reduction

With the oxygen conversion efficiency of metal-free carbon-based fuel cells dramatically improved, the building blocks of covalent organic frameworks (COFs) raised principal concerns on the catalytic active sites with indistinct electronic states. Herein, to address this issue, we demonstrate COFs for oxygen reduction reaction (ORR) by regulating the edge-hanging thiophene units, and the molecular geometries are further modulated via positional thiophene isomerization strategy, affording isomeric COF-α with 2-substitution and COF-β with 3-substitution on the frameworks. The electronic states and intermediate adsorption ability are well-regulated through geometric modification, resulting in controllable chemical activity and local density of π-electrons. Notably, the introduction of thiophene units with different substitution positions into a pristine pure carbon-based COF model COF-Ph achieves excellent activity with a half-wave potential of 0.76 V versus the reversible hydrogen electrode, which is higher than most of those metal-free or metal-based electrocatalysts. Utilizing the combination of theoretical prediction and in situ Raman spectra, we show that the isomeric thiophene skeleton (COF-α and COF-β) can induce the dangling unit activation, accurately identifying the pentacyclic-carbon (thiophene α-position) adjacent to sulfur atom as active sites. The results suggest that the isomeric dangling groups in COFs are suitable for the ORR with promising geometry construction.

Adsorption of O2 on the Preferred -O-Au Sites of Small Gold Oxide Clusters: Charge-dependent Interaction and Activation

Decades of research have illuminated the significant roles of gold/gold oxide clusters in small molecule catalytic oxidation. However, many fundamental questions, such as the actual sites to adsorb and activate O2 and the impact of charge, remain unanswered. Here, we have utilized an improved genetic algorithm program coupled with the DFT method to systematically search for the structures of Au1-5Ox-/+/0 (x = 1-4) and calculated binding interactions between Au1-5Ox-/+/0 (x = 1-2) and O2, aiming to determine the active sites and to elucidate the impact of different charge states in gold oxide systems. The results revealed that the reactivity of all three kinds of small gold oxide clusters toward O2 is strongly site-dependent, with clusters featuring an -O-Au site exhibiting a preference for adsorption. The charges on small gold oxide clusters significantly impact the interaction strength and the activation degree of adsorbed O2: in the case of anionic cluster, the interaction between O2 and the -O-Au sites leads to a chemical reaction involving electron transfer, thereby significantly activating O2; in neutral and cationic clusters, the adsorption of O2 on their -O-Au sites can be viewed as an electrostatic interaction. Pointedly, for cationic clusters, the highly concentrated positive charge on the Au atom of the -O-Au sites can strongly adsorb but hardly activate the adsorbed O2. These results have certain reference points for understanding the gold oxide interfaces and the improved catalytic oxidation performance of gold-based systems in the presence of atomic oxygen species.

Efficient Machine Learning Model Focusing on Active Sites for the Discovery of Bifunctional Oxygen Electrocatalysts in Binary Alloys

The distinctive characteristics of alloy catalysts, encompassing composition, structure, and modifiable adsorption sites, present significant potential for the development of highly efficient electrocatalysts for oxygen evolution/reduction reactions [oxygen evolution reactions (OERs)/oxygen reduction reactions (ORRs)]. Machine learning (ML) methods can quickly establish the relationship between material features and catalytic activity, thus accelerating the development of alloy electrocatalysts. However, the current abundance of features presents a crucial challenge in selecting the most pertinent ones. In this study, we explored seven intrinsic features directly derived from the material's structure, with a specific focus on the chemical environment of active sites and their nearest neighbors. An accurate and efficient ML model to predict potential bifunctional oxygen electrocatalysts based on the intrinsic features of AB-type alloy active sites and intermediate free energies in the OERs/ORRs was established. These features possess clear physical and chemical meanings, closely linked to the electronic and geometric structures of active sites and neighboring atoms, thereby providing indispensable insights for the discovery of high-performance electrocatalysts. The ML model achieved R2 scores of 0.827, 0.913, and 0.711 for the predicted values of the three intermediate (OH, O, OOH) free energies, with corresponding mean absolute errors of 0.175, 0.242, and 0.200 eV, respectively. These results indicate that the ML model exhibits high accuracy in predicting the intermediate free energies. Furthermore, the ML model exhibited a prediction efficiency 150,000 times faster than traditional density functional theory calculations. This work will offer valuable insights and a framework for facilitating the rapid design of potential catalysts by ML methods.

Precise Atomic Structure Regulation of Single-Atom Platinum Catalysts toward Highly Efficient Hydrogen Evolution Reaction

Noble metal single-atom-catalysts (SACs) have demonstrated significant potential to improve atom utilization efficiency and catalytic activity for hydrogen evolution reaction (HER). However, challenges still remain in rationally modulating active sites and catalytic activities of SACs, which often results in sluggish kinetics and poor stability, especially in neutral/alkaline media. Herein, precise construction of Pt single atoms anchored on edge of 2D layered Ni(OH)2 (Pt-Ni(OH)2-E) is achieved utilizing in situ electrodeposition. Compared to the single-atom Pt catalysts anchored on the basal plane of Ni(OH)2 (Pt-Ni(OH)2-BP), the Pt-Ni(OH)2-E possesses superior electron affinity and high intrinsic catalytic activity, which favors the strong adsorption and rapid dissociation toward water molecules. As a result, the Pt-Ni(OH)2-E catalyst requires low overpotentials of 21 and 34 mV at 10 mA cm-2 in alkaline and neutral conditions, respectively. Specifically, it shows the high mass activity of 23.6 A mg-1 for Pt at the overpotential of 100 mV, outperforming the reported catalysts and commercial Pt/C. This work provides new insights into the rational design of active sites for preparing high-performance SACs.

Synergy of Active Sites and Charge Transfer in Branched WO3/W18O49 Heterostructures for Enhanced NO2 Sensing

Achieving reliable detection of trace levels of NO2 gas is essential for environmental monitoring and protection of human health protection. Herein, a thin-film gas sensor based on branched WO3/W18O49 heterostructures was fabricated. The optimized WO3/W18O49 sensor exhibited outstanding NO2 sensing properties with an ultrahigh response value (1038) and low detection limit (10 ppb) at 50 °C. Such excellent sensing performance could be ascribed to the synergistic effect of accelerated charge transfer and increased active sites, which is confirmed by electrochemical impedance spectroscopy and temperature-programmed desorption characterization. The sensor exhibited an excellent detection ability to NO2 under different air quality conditions. This work provides an effective strategy for constructing WO3/W18O49 heterostructures for developing NO2 gas sensors with an excellent sensing performance.

Fundamentally Manipulating the Electronic Structure of Polar Bifunctional Catalysts for Lithium-Sulfur Batteries: Heterojunction Design versus Doping Engineering

Heterogeneous structures and doping strategies have been intensively used to manipulate the catalytic conversion of polysulfides to enhance reaction kinetics and suppress the shuttle effect in lithium-sulfur (Li-S) batteries. However, understanding how to select suitable strategies for engineering the electronic structure of polar catalysts is lacking. Here, a comparative investigation between heterogeneous structures and doping strategies is conducted to assess their impact on the modulation of the electronic structures and their effectiveness in catalyzing the conversion of polysulfides. These findings reveal that Co0.125 Zn0.875 Se, with metal-cation dopants, exhibits superior performance compared to CoSe2 /ZnSe heterogeneous structures. The incorporation of low Co2+ dopants induces the subtle lattice strain in Co0.125 Zn0.875 Se, resulting in the increased exposure of active sites. As a result, Co0.125 Zn0.875 Se demonstrates enhanced electron accumulation on surface Se sites, improved charge carrier mobility, and optimized both p-band and d-band centers. The Li-S cells employing Co0.125 Zn0.875 Se catalyst demonstrate significantly improved capacity (1261.3 mAh g-1 at 0.5 C) and cycle stability (0.048% capacity delay rate within 1000 cycles at 2 C). This study provides valuable guidance for the modulation of the electronic structure of typical polar catalysts, serving as a design directive to tailor the catalytic activity of advanced Li-S catalysts.

Recent Progress in Covalent Organic Frameworks for Cathode Materials

Covalent organic frameworks (COFs) are constructed from small organic molecules through reversible covalent bonds, and are therefore considered a special type of polymer. Small organic molecules are divided into nodes and connectors based on their roles in the COF's structure. The connector generally forms reversible covalent bonds with the node through two reactive end groups. The adjustment of the length of the connector facilitates the adjustment of pore size. Due to the diversity of organic small molecules and reversible covalent bonds, COFs have formed a large family since their synthesis in 2005. Among them, a type of COF containing redox active groups such as -C=O-, -C=N-, and -N=N- has received widespread attention in the field of energy storage. The ordered crystal structure of COFs ensures the ordered arrangement and consistent size of pores, which is conducive to the formation of unobstructed ion channels, giving these COFs a high-rate performance and a long cycle life. The voltage and specific capacity jointly determine the energy density of cathode materials. For the COFs' cathode materials, the voltage plateau of their active sites' VS metallic lithium is mostly between 2 and 3 V, which has great room for improvement. However, there is currently no feasible strategy for this. Therefore, previous studies mainly improved the theoretical specific capacity of the COFs' cathode materials by increasing the number of active sites. We have summarized the progress in the research on these types of COFs in recent years and found that the redox active functional groups of these COFs can be divided into six subcategories. According to the different active functional groups, these COFs are also divided into six subcategories. Here, we summarize the structure, synthesis unit, specific surface area, specific capacity, and voltage range of these cathode COFs.

Approaches to Improving the Selectivity of Nanozymes

Nanozymes mimic enzymes and that includes their selectivity. To achieve selectivity, significant inspiration for nanoparticle design can come from the geometric and molecular features that make enzymes selective catalysts. The two central features enzymes use are control over the arrangement of atoms in the active site and the placing of the active site down a nanoconfined substrate channel. The implementation of enzyme-inspired features has already been shown to both improve activity and selectivity of nanoparticles for a variety of catalytic and sensing applications. The tuning and control of active sites on metal nanoparticle surfaces ranges from simply changing the composition of the surface metal to sophisticated approaches such as the immobilization of single atoms on a metal substrate. Molecular frameworks provide a powerful platform for the implementation of isolated and discrete active sites while unique diffusional environments further improve selectivity. The implementation of nanoconfined substrate channels around these highly controlled active sites offers further ability to control selectivity through altering the solution environment and transport of reactants and products. Implementing these strategies together offers a unique opportunity to improve nanozyme selectivity in both sensing and catalysis.

Design Principles of Single-Atom Catalysts for Oxygen Evolution Reaction: From Targeted Structures to Active Sites

Hydrogen production from electrolytic water electrolysis is considered a viable method for hydrogen production with significant social value due to its clean and pollution-free nature, high hydrogen production efficiency, and purity, but the anode oxygen evolution reaction (OER) process is complex and kinetically slow. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites often exhibit high catalytic activity and are expected to be extensively applied. The catalytic performance of OER can be further improved by precise regulation of the structure through electronic effects, coordination environment, heteroatomic doping, and so on. In this review, the mechanisms of OER under different conditions are introduced, the latest research progress of SACs in the field of OER is systematically summarized, and then the effects of various structural regulation strategies on catalytic performance are discussed, and principles and ideas for the design of SACs for OER are proposed. In the end, the outstanding issues and current challenges in this field are summarized.

Tailored Succinic Acid-Derived Molecular Structures toward 25.41%-Efficiency and Stable Perovskite Solar Cells

Minimizing interfacial charged traps in perovskite films is crucial for reducing the non-radiative recombination and improving device performance. In this study, succinic acid (SA) derivatives varying active sites and spatial configurations are designed to modulate defects and crystallization in perovskite film. The SA derivative with two symmetric Br atoms, dibromosuccinic acid (DBSA), exhibits the optimal spatial arrangement for defect passivation. Experimental and theoretical results indicate that the carboxyl group and atomic Br in DBSA synergistically interact with the under-coordinated Pb2+ . Moreover, the strong electronegativity of Br efficiently stabilizes the formamidinium cation via electrostatic interaction. Consequently, film quality is significantly improved and non-radiative recombination is markedly depressed, resulting in a photoluminesence lifetime of exceeding 4 µs of and a carrier diffusion length of 3 µm. An exceptional efficiency of 25.41% (certified at 25.00%) along with a high fill factor of 84.39% and excellent long-term operational stability have been achieved finally.

Activating Mn Sites by Ni Replacement in α-MnO2

Transition metal oxides are characterized by an acute structure and composition dependent electrocatalytic activity toward the oxygen evolution (OER) and oxygen reduction (ORR) reactions. For instance, Mn containing oxides are among the most active ORR catalysts, while Ni based compounds tend to show high activity toward the OER in alkaline solutions. In this study, we show that incorporation of Ni into α-MnO2, by adding Ni precursor into the Mn-containing hydrothermal solution, can generate distinctive sites with different electronic configurations and contrasting electrocatalytic activity. The structure and composition of the Ni modified hollandite α-MnO2 phase were investigated by X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), transmission electron microscopy coupled to energy-dispersive X-ray spectroscopy (TEM-EDX), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photoelectron spectroscopy (XPS). Our analysis suggests that Mn replacement by Ni into the α-MnO2 lattice (site A) occurs up to approximately 5% of the total Mn content, while further increasing Ni content promotes the nucleation of separate Ni phases (site B). XAS and XRD show that the introduction of sites A and B have a negligible effect on the overall Mn oxidation state and bonding characteristics, while very subtle changes in the XPS spectra appear to suggest changes in the electronic configuration upon Ni incorporation into the α-MnO2 lattice. On the other hand, changes in the electronic structure promoted by site A have a significant impact in the pseudocapacitive responses obtained by cyclic voltammetry in KOH solution at pH 13, revealing the appearance of Mn 3d orbitals at the energy (potential) range relevant to the ORR. The evolution of Mn 3d upon Ni replacement significantly increases the catalytic activity of α-MnO2 toward the ORR. Interestingly, the formation of segregated Ni phases (site B) leads to a decrease in the ORR activity while increasing the OER rate.

Reversible Structural Evolution of Metal-Nitrogen-Doped Carbon Catalysts During CO2 Electroreduction: An Operando X-ray Absorption Spectroscopy Study

Electrochemical CO2 reduction (CO2 RR) is a rising technology, aiming to reduce the energy sector dependence on fossil fuels and to produce carbon-neutral raw materials. Metal-nitrogen-doped carbons (M-N-C) are emerging, cost-effective catalysts for this reaction; however, their long-term stability is a major issue. To overcome this, understanding their structural evolution is crucial, requiring systematic in-depth operando studies. Here a series of M-N-C catalysts (M = Fe, Sn, Cu, Co, Ni, Zn) is investigated using operando X-ray absorption spectroscopy. It is found that the Fe-N-C and Sn-N-C are prone to oxide clusters formation even before CO2 RR. In contrast, the respective metal cations are singly dispersed in the as-prepared Cu-N-C, Co-N-C, Ni-N-C, and (Zn)-N-C. During CO2 RR, metallic clusters/nanoparticles reversibly formed in all catalysts, except for the Ni-N-C. This phenomenon, previously observed only in Cu-N-C, thus is ubiquitous in M-N-C catalysts. The competition between M-O and M-N interactions is an important factor determining the mobility of metal species in M-N-C. Specifically, the strong interaction between the Ni centers and the N-functional groups of the carbon support results in higher stability of the Ni single-sites, leading to the excellent performance of Ni-N-C in the CO2 to CO conversion, in comparison to other transition metals.

Recent Progress in Hot Spot Regulated Strategies for Catalysts Applied in Li-CO2 Batteries

As a high energy density power system, lithium-carbon dioxide (Li-CO2 ) batteries play an important role in addressing the fossil fuel crisis issues and alleviating the greenhouse effect. However, the sluggish transformation kinetic of CO2 and the difficult decomposition of discharge products impede the achievement of large capacity, small overpotential, and long life span of the batteries, which require exploring efficient catalysts to resolve these problems. In this review, the main focus is on the hot spot regulation strategies of the catalysts, which include the modulation of the active sites, the designing of microstructure, and the construction of composition. The recent progress of promising catalysis with hot spot regulated strategies is systematically addressed. Critical challenges are also presented and perspectives to provide useful guidance for the rational design of highly efficient catalysts for practical advanced Li-CO2 batteries are proposed.

Rhodium and Carbon Sites with Strong d-p Orbital Interaction for Efficient Bifunctional Catalysis

Efficient and stable catalysts are highly desired for the electrochemical conversion of hydrogen, oxygen, and water molecules, processes which are crucial for renewable energy conversion and storage technologies. Herein, we report the development of hollow nitrogenated carbon sphere (HNC) dispersed rhodium (Rh) single atoms (Rh1HNC) as an efficient catalyst for bifunctional catalysis. The Rh1HNC was achieved by anchoring Rh single atoms in the HNC matrix with an Rh-N3C1 configuration, via a combination of in situ polymerization and carbonization approach. Benefiting from the strong metal atom-support interaction (SMASI), the Rh and C atoms can collaborate to achieve robust electrochemical performance toward both the hydrogen evolution and oxygen reduction reactions in acidic media. This work not only provides an active site with favorable SMASI for bifunctional catalysis but also brings a strategy for the design and synthesis of efficient and stable bifunctional catalysts for diverse applications.

Heterogeneity of Active Sites in the Polymer Chain Transfer Reactions at Olefin Polymerization over Multisite Supported Ziegler-Natta Catalysts

In this review, we summarize and discuss our experimental data published in a number of papers on the transfer reactions of polymer chains in the polymerization of ethylene, propylene, and hexene-1, and the copolymerization of ethylene with α-olefins over multisite supported titanium-magnesium catalysts (TMC). Three groups of transfer reactions are discussed in the review: (1) transfer reactions with AlEt3 cocatalyst, (2) transfer reactions with hydrogen, and (3) transfer reactions with participation of α-olefins in the case of ethylene copolymerization with α-olefins. We have found polymerization conditions where it is possible to observe heterogeneity of active sites of TMC for all three groups of the indicated reactions. It is shown that (1) the transfer reaction with AlEt3 proceeds with higher reactivity on the active sites that produce polymers with low molecular weight; (2) the transfer reaction with hydrogen, in the case of α-olefin polymerization and copolymerization of ethylene with α-olefins, proceeds with higher reactivity on the active sites which produce polymers with high molecular weight; (3) the transfer reaction with α-olefins proceed with higher reactivity on the active sites that produce high molecular weight polymers.

Identification of potential phytochemical inhibitors for the proven six chronic obstructive pulmonary disease biomarkers - A molecular dynamics study

COPD is a multifactorial lung disease causing breathing difficulties in individuals and is becoming a major health concern worldwide. The unclear pathogenic mechanism and high mortality rate urge the development of drugs against this disease. In this study, around six COPD biomarkers identified from the preceding research through integrated gene expression analysis were taken as COPD target proteins. A total of 3307 phytocompounds were included in the COPD phytocompound library from 59 therapeutic plant sources. Furthermore, a crucial three-step virtual screening process (Absorption, Distribution, Metabolism, and Excretion, respiratory nontoxicity, less harmful and nontoxic compound category) was implemented to filter the potential drug-like phytocompounds. As a result, 160 phytocompounds were filtered with desired Absorption, Distribution, Metabolism, Excretion and Toxicity properties. The filtered 160 phytocompounds were docked against six COPD target proteins and the best-docked complexes were identified through visual inspection based on six unique parameters in SeeSAR. Furthermore, the best docked complexes were subjected to molecular dynamics simulation studies to assess the stability and conformational changes of the complexes. The presence of few amino acid residues within the crucial active, allosteric and catalytic sites of the six target proteins were revealed from the binding interaction types and major residual fluctuations from molecular docking and dynamic simulation studies respectively. This is indicative of the potential inhibitory activity of phytocompounds against the COPD biomarkers. Here we report the identified phytocompounds as a promising lead molecule for the six COPD biomarkers through in silico analysis opening new avenues in COPD pathogenesis and treatments.Communicated by Ramaswamy H. Sarma.

Identifying Fe as OER Active Sites and Ultralow-Cost Bifunctional Electrocatalysts for Overall Water Splitting

Electrocatalysts based on Fe and other transition metals are regarded as most promising candidates for accelerating the oxygen evolution reaction (OER), whereas whether Fe is the catalytic active site for OER is still under debate. Here, unary Fe- and binary FeNi- based catalysts, FeOOH and FeNi(OH)x , are produced by self-reconstruction. The former is a dual-phased FeOOH, possessing abundant oxygen vacancies (VO ) and mixed-valence states, delivering the highest OER performance among all the unary iron oxides- and hydroxides- based powder catalysts reported to date, supporting Fe can be catalytically active for OER. As to binary catalyst, FeNi(OH)x is fabricated featuring 1) an equal molar content of Fe and Ni and 2) rich VO , both of which are found essential to enable abundant stabilized reactive centers (FeOOHNi) for high OER performance. Fe is found to be oxidized to 3.5+ during the *OOH process, thus, Fe is identified to be the active site in this new layered double hydroxide (LDH) structure with Fe:Ni = 1:1. Furthermore, the maximized catalytic centers enable FeNi(OH)x @NF (nickel foam) as low-cost bifunctional electrodes for overall water-splitting, delivering excellent performance comparable to commercial electrodes based on precious metals, which overcomes a major obstacle to the commercialization of bifunctional electrodes: prohibitive cost.

Characterization and Molecular Mechanism of Aminoglycoside-6-Adenyl Transferase Associated with Aminoglycoside Resistance from Elizabethkingia meningoseptica

Purpose

Elizabethkingia meningoseptica (EM) is a multi-drug-resistant bacterium of global concern for its role in nosocomial infection and is generally resistant to aminoglycoside antibiotics. In the whole genome of an EM strain (FMS-007), an aminoglycoside-6-adenyl transferase gene (ant(6)FMS-007) was predicted. This study aimed to characterize the biochemical function of ANT(6)FMS-007 and analyze the relationship between genotype and phenotype of ant(6) in clinical EM isolates, so as to provide evidence for clinical precision drug use. This study could establish a method for the verification of known or unknown functionally resistant genes.

Methods

A total of 42 EM clinical isolates were collected from clinical departments during 2015-2023. The phenotype of aminoglycoside antibiotics was analyzed by broth microdilution (BMD) and Kirby-Bauer (K-B) methods. The whole-length ant(6) from EM clinical isolates was analyzed by polymerase chain reaction (PCR) and sequencing. The biochemical function of predictive ANT(6)FMS-007 from the FMS-007 whole genome was identified by 3D plate experiment and mass spectrometry analysis. Candidate active sites were predicted by multi-species sequence alignment and molecular docking, and other important sites were identified in the comparison of ant(6) genotypes and phenotypes of EM clinical isolates. Drug susceptibility test was used to verify the function of these sites.

Results

The predictive ANT(6)FMS-007 protein could inactivate STR by modifying STR with ATP to form STR-AMP. Four active sites (Asp-38, Asp-42, Lys-95, and Lys-213) of ANT(6)FMS-007 were identified. Thirty-one EM clinical isolates (74%) carried the ant(6) gene. Eight EM clinical isolates containing the ant(6) gene had MIC values (<=32μg/mL) lower by at least 16-fold than FMS-007 (512μg/mL) for STR, and N59H and K204Q were the common mutations in the ant(6) gene.

Conclusion

This assay verified the biochemical function of the predictive gene ant(6)FMS-007 and could provide an alternative method to study resistant gene function in multi-drug-resistant bacteria. The inconsistency between genotype and phenotype of resistant genes indicated that the combination of resistance gene detection and functional analysis could better provide precision medicine for clinical use.

Insights into the Modification of Carbonous Felt as an Electrode for Vanadium Redox Flow Batteries

The vanadium redox flow battery (VRFB) has been regarded as one of the best potential stationary electrochemical storage systems for its design flexibility, long cycle life, high efficiency, and high safety; it is usually utilized to resolve the fluctuations and intermittent nature of renewable energy sources. As one of the critical components of VRFBs to provide the reaction sites for redox couples, an ideal electrode should possess excellent chemical and electrochemical stability, conductivity, and a low price, as well as good reaction kinetics, hydrophilicity, and electrochemical activity, in order to satisfy the requirements for high-performance VRFBs. However, the most commonly used electrode material, a carbonous felt electrode, such as graphite felt (GF) or carbon felt (CF), suffers from relatively inferior kinetic reversibility and poor catalytic activity toward the V²⁺/V³⁺ and VO²⁺/VO₂⁺ redox couples, limiting the operation of VRFBs at low current density. Therefore, modified carbon substrates have been extensively investigated to improve vanadium redox reactions. Here, we give a brief review of recent progress in the modification methods of carbonous felt electrodes, such as surface treatment, the deposition of low-cost metal oxides, the doping of nonmetal elements, and complexation with nanostructured carbon materials. Thus, we give new insights into the relationships between the structure and the electrochemical performance, and provide some perspectives for the future development of VRFBs. Through a comprehensive analysis, it is found that the increase in the surface area and active sites are two decisive factors that enhance the performance of carbonous felt electrodes. Based on the varied structural and electrochemical characterizations, the relationship between the surface nature and electrochemical activity, as well as the mechanism of the modified carbon felt electrodes, is also discussed.

Nanoscale Ni-NiO-ZnO Heterojunctions for Switchable Dehydrogenation and Hydrogenation through Modulation of Active Sites

Catalysts consisting of metal-metal hydroxide/oxide interfaces are highly in demand for advanced catalytic applications as their multicomponent active sites will enable different reactions to occur in close proximity through synergistic cooperation when a single component fails to promote it. To address this, herein we disclosed a simple, scalable, and affordable method for synthesizing catalysts consisting of nanoscale nickel-nickel oxide-zinc oxide (Ni-NiO-ZnO) heterojunctions by a combination of complexation and pyrolytic reduction. The modulation of active sites of catalysts was achieved by varying the reaction conditions of pyrolysis, controlling the growth, and inhibiting the interlayer interaction and Ostwald ripening through the efficient use of coordinated acetate and amide moieties of Zn-Ni materials (ZN-O), produced by the reaction between hydrazine hydrate and Zn-Ni-acetate complexes. We found that the coordinated organic moieties are crucial for forming heterojunctions and their superior catalytic activity. We analyzed two antagonistic reactions to evaluate the performance of the catalysts and found that while the heterostructure of Ni-NiO-ZnO and their cooperative synergy were crucial for managing the effectiveness and selectivity of the catalyst for dehydrogenation of aryl alkanes/alkenes, they failed to enhance the hydrogenation of nitro arenes. The hydrogenation reaction was influenced by the shape, surface properties, and interaction of the hydroxide and oxide of both zinc and nickel, particularly accessible Ni(0). The catalysts showed functional group tolerance, multiple reusabilities, broad substrate applicability, and good activity for both reactions.

Dynamic Reconstitution Between Copper Single Atoms and Clusters for Electrocatalytic Urea Synthesis

Electrocatalytic CN coupling between carbon dioxide and nitrate has emerged to meet the comprehensive demands of carbon footprint closing, valorization of waste, and sustainable manufacture of urea. However, the identification of catalytic active sites and the design of efficient electrocatalysts remain a challenge. Herein, the synthesis of urea catalyzed by copper single atoms decorated on a CeO₂ support (denoted as Cu₁ -CeO₂ ) is reported. The catalyst exhibits an average urea yield rate of 52.84 mmol h^-1 g_cat. ^-1 at -1.6 V versus reversible hydrogen electrode. Operando X-ray absorption spectra demonstrate the reconstitution of copper single atoms (Cu₁ ) to clusters (Cu₄ ) during electrolysis. These electrochemically reconstituted Cu₄ clusters are real active sites for electrocatalytic urea synthesis. Favorable CN coupling reactions and urea formation on Cu₄ are validated using operando synchrotron-radiation Fourier transform infrared spectroscopy and theoretical calculations. Dynamic and reversible transformations of clusters to single-atom configurations occur when the applied potential is switched to an open-circuit potential, endowing the catalyst with superior structural and electrochemical stabilities.

Heme-Dependent Supramolecular Nanocatalysts: A Review

Enzymes fold into three-dimensional structures to distribute amino acid residues for catalysis, which inspired the supramolecular approach to construct enzyme-mimicking catalysts. A key concern in the development of supramolecular strategies is the ability to confine and orient functional groups to form enzyme-like active sites in artificial materials. This review introduces the design principles and construction of supramolecular nanomaterials exhibiting catalytic functions of heme-dependent enzymes, a large class of metalloproteins, which rely on a heme cofactor and spatially configured residues to catalyze diverse reactions via a complex multistep mechanism. We focus on the structure-activity relationship of the supramolecular catalysts and their applications in materials synthesis/degradation, biosensing, and therapeutics. The heme-free catalysts that catalyze reactions achieved by hemeproteins are also briefly discussed. Towards the end of the review, we discuss the outlook on the challenges related to catalyst design and future prospective, including the development of structure-resolving techniques and design concepts, with the aim of creating enzyme-mimicking materials that possess catalytic power rivaling that of natural enzymes..

The Dynamic Nature of Graphene Active Sites in the H2O Gasification process: A ReaxFF and DFT Study

CONTEXT

A steam-rich environment is a more promising application scenario for future coal-fired processes, while active sites are the key factor that determines the reactivity of carbonaceous fuels. The steam gasification process of carbon surfaces with different numbers of active sites (0, 12, 24, 36) was simulated using reactive molecular dynamics in the present study. The temperature for the decomposition of H₂O and the gasification of carbon is determined using temperature-increasing simulation. The decomposition of H₂O was influenced by two driving forces, thermodynamics and active sites on the carbon surface, which dominated the different reaction stages, leading to the observed segmentation phenomenon of the H₂ production rate. The existence and number of initial active sites have a positive correlation with both two stages of the reaction, greatly reducing the activation energy. Residual OH groups play an important role in the gasification of carbon surfaces. The supply of OH groups through the cleavage of OH bonds in H₂O is the rate-limiting step in the carbon gasification reaction. The adsorption preference at carbon defect sites was calculated using density functional theory. Two stable configurations (ether & semiquinone groups) can be formed with O atoms adsorbed on the carbon surface according to the number of active sites. This study will provide further insights into the tuning of active sites for advanced carbonaceous fuels or materials.

METHODS

The large-scale atomic/molecule massively parallel simulator (LAMMPS) code combined with the reaction force-field method was used to carry out the ReaxFF molecular dynamics simulation, where the ReaxFF potentials were taken from Castro-Marcano, Weismiller and William. The initial configuration was built using Packmol, and the visualization of the calculation results was realized through Visual Molecular Dynamics (VMD). The timestep was set to 0.1 fs to detect the oxidation process with high precision. PWscf code in QUANTUM ESPRESSO (QE) package, was used to evaluate the relative stability of different possible intermediate configurations and the thermodynamic stability of gasification reactions. The projector augmented wave (PAW) and the generalized gradient approximation of Perdew-Burke-Ernzerhof (PBE-GGA) were adopted. Kinetic energy cutoffs of 50 Ry and 600 Ry, and a uniform mesh of 4 × 4 × 1 k-points were used.

Controllable Deposition of Bi onto Pd for Selective Hydrogenation of Acetylene

The rational regulation of catalyst active sites at atomic scale is a key approach to unveil the relationship between structure and catalytic performance. Herein, we reported a strategy for the controllable deposition of Bi on Pd nanocubes (Pd NCs) in the priority order from corners to edges and then to facets (Pd NCs@Bi). The spherical aberration-corrected scanning transmission electron microscopy (ac-STEM) results indicated that Bi₂O₃ with an amorphous structure covers the specific sites of Pd NCs. When only the corners and edges of the Pd NCs were covered, the supported Pd NCs@Bi catalyst exhibited an optimal trade-off between high conversion and selectivity in the hydrogenation of acetylene to ethylene under ethylene-rich conditions (99.7% C₂H₂ conversion and 94.3% C₂H₄ selectivity at 170 °C) with remarkable long-term stability. According to the H₂-TPR and C₂H₄-TPD measurements, the moderate hydrogen dissociation and the weak ethylene adsorption are responsible for this excellent catalytic performance. Following these results, the selectively Bi-deposited Pd nanoparticle catalysts showed incredible acetylene hydrogenation performance, which provides a feasible perspective to design and develop highly selective hydrogenation catalysts for industrial applications.

To Molecularly Block Hydrogen Evolution Sites of Molybdenum Disulfide toward Improved Catalytic Performance for Electrochemical Nitrogen Reduction

2H-molybdenum disulfide (2H-MoS₂ ) represents a classical catalyst for the electrochemical N₂ reduction reaction (NRR) in water that offers a promising technology toward sustainable production of NH₃ driven by renewable energy. While the catalytic efficiency is severely limited by a simultaneous and competing H₂ evolution reaction (HER). Herein, it is proposed that the S edge of 2H-MoS₂ , which is known as main sites to afford HER, is intentionally covered by cobalt phthalocyanine (CoPc) molecules through axial coordination. While the Mo sites with S vacancies at 2H-MoS₂ edge is recognized as highly NRR active, and can keep structurally intact in the CoPc based modification. The resultant composite thus exhibits high NRR performance with Faradic efficiency and NH₃ yields increase by fourfold and twofold, respectively, comparing to pristine 2H-MoS₂ . These findings provide a deep insight into the mechanism of 2H-MoS₂ based NRR catalysis and suggest an efficient molecular modification strategy to promote NRR in water.

In situ X-ray Absorption Spectroscopy of Metal/Nitrogen-doped Carbons in Oxygen Electrocatalysis

Metal/nitrogen-doped carbons (M-N-C) are promising candidates as oxygen electrocatalysts due to their low cost, tunable catalytic activity and selectivity, and well-dispersed morphologies. To improve the electrocatalytic performance of such systems, it is critical to gain a detailed understanding of their structure and properties through advanced characterization. In situ X-ray absorption spectroscopy (XAS) serves as a powerful tool to probe both the active sites and structural evolution of catalytic materials under reaction conditions. In this review, we firstly provide an overview of the fundamental concepts of XAS and then comprehensively review the setup and application of in situ XAS, introducing electrochemical XAS cells, experimental methods, as well as primary functions on catalytic applications. The active sites and the structural evolution of M-N-C catalysts caused by the interplay with electric fields, electrolytes and reactants/intermediates during the oxygen evolution reaction and the oxygen reduction reaction are subsequently discussed in detail. Finally, major challenges and future opportunities in this exciting field are highlighted.

Identification of Active Sites over Metal-Free Carbon Catalysts for Flue Gas Desulfurization

Carbon-based catalysts have been extensively used for flue gas desulfurization (FGD) and have exerted great importance in controlling SO₂ emissions over the past decades. However, many fundamental details about the nature of the active sites and desulfurization mechanism still remain unclear. Here, we reported the experimental and theoretical identifications of active sites in FGD on carbon catalysts. Temperature-programmed decomposition allowed us to modulate the number of oxygen functional groups on carbon catalysts and to establish its correlation with desulfurization activity. Selective passivation further demonstrated that the ketonic carbonyl (C═O) groups are the intrinsic active sites for FGD reaction. Combined with transient response experiments, quasi-in situ X-ray photoelectron spectroscopy, and density functional theory simulations, it was revealed that desulfurization reaction on carbon catalysts mainly proceeded via the Langmuir-Hinshelwood mechanism, during which the nucleophilic ketonic C═O groups served as active sites for chemically absorbing SO₂ and their adjacent sp²-hybridized carbon atoms dissociatively activated O₂. It also turned out that the formation of H₂SO₄ is the reaction barrier step. The output of this study should not only advance the understanding of desulfurization at the atomic scale but also provide a general guideline for the rational design of efficient carbon catalysts for FGD.

Cubic CuFe2O4 Spinel with Octahedral Fe Active Sites for Electrochemical Dechlorination of 1,2-Dichloroethane

CuFe₂O₄ spinel has been considered as a promising catalyst for the electrochemical reaction, while the nature of the crystal phase on its intrinsic activity and the kind of active site need to be further explored. Herein, the crystal phase-dependent catalytic behavior and the main active sites of CuFe₂O₄ spinel for electrochemical dechlorination of 1,2-dichloroethane are carefully studied based on the combination of experiments and theoretical calculations. Cubic and tetragonal CuFe₂O₄ are successfully prepared by a facile sol-gel method combined with high temperature calcination. Impressively, CuFe₂O₄ with the cubic phase shows a higher activity and ethylene selectivity compared to CuFe₂O₄ with the tetragonal phase, suggesting a significant facilitation of electrocatalytic performance by the cubic crystal structure. Moreover, the octahedral Fe atom on the surface of cubic CuFe₂O₄(311) is the active site responsible to produce ethylene with the energy barrier of 0.40 eV. This work demonstrates the significance of crystal phase engineering for the optimization of electrocatalytic performance and offers an efficient strategy for the development of advanced electrocatalysts.

Candied Haws-Like Fe-N-C Catalysts with Broadened Carbon Interlayer Spacing for Efficient Zinc-Air Battery

As efficient nonprecious metal catalysts for oxygen reduction reaction (ORR), Fe-N-C materials are one of the most promising alternatives to Pt-based catalysts for fuel cells and metal-air batteries. However, the intrinsically low density of key active sites like FeN₄ moieties hampers their commercial applications. Herein, we provide a smart strategy to construct a candied haws-like Fe-N-C catalyst (CH-FeNC) with broadened carbon interplanar spacing (>4 Å), starting with trehalose as a structure-built brick coupled with a zinc-zeolite imidazole framework (ZIF-8) and polyaniline (PANI) and then followed by copyrolysis carbonization of them. The obtained CH-FeNC exhibits half-wave potentials of 0.92 and 0.90 V (vs RHE) before and after 10,000 cycles in 0.1 M KOH, which are superior to the 0.90 and 0.85 V obtained by commercial Pt/C for ORR. The power density of a homemade zinc-air battery equipped with the catalyst is up to 131 mW cm^-2, greater than that of Pt/C (124 mW cm^-2). The extended X-ray absorption fine structure (EXAFS) results and density functional theory (DFT) theoretical calculations reveal that there exists enriched zigzag or armchair edge-hosted FeN₄ active sites, located at the abundant interface between carbon components in this composite. Furthermore, the unique broadened carbon interlayer spacing plays a key role in deciding the ORR rate in alkaline but not in acidic environments because there exists a fifth ligand of active Fe in the form of FeN₄ centers coupled with SO₄^2- and ClO₄^- from acids.

Simultaneously Constructing Active Sites and Regulating Mn-O Strength of Ru-Substituted Perovskite for Efficient Oxidation and Hydrolysis Oxidation of Chlorobenzene

Chlorinated volatile organic compounds (CVOCs) are a class of hazardous pollutants that severely threaten environmental safety and human health. Although the catalytic oxidation technique for CVOCs elimination is effective, enhancing the catalytic efficiency and simultaneously inhibiting the production of organic byproducts is still of great challenge. Herein, Ru-substituted LaMn(Ru)O_{3+ δ} perovskite with Ru-O-Mn structure and weakened Mn-O bond strength has been developed for catalytic oxidation of chlorobenzene (CB). The formed Ru-O-Mn structure serves as favorable sites for CB adsorption and activation, while the weakening of Mn-O bond strength facilitates the formation of active oxygen species and improves oxygen mobility and catalyst reducibility. Therefore, LaMn(Ru)O_{3+ δ} exhibits superior low-temperature activity with the temperature of 90% CB conversion decreasing by over 90 °C compared with pristine perovskite, and the deep oxidation of chlorinated byproducts produced in low temperature is also accelerated. Furthermore, the introduction of water vapor into reaction system triggers the process of hydrolysis oxidation that promotes CB destruction and inhibits the generation of chlorinated byproducts, due to the higher-activity *OOH species generated from the dissociated H₂ O reacting with adsorbed oxygen. This work can provide a unique, high-efficiency, and facile strategy for CVOCs degradation and environmental improvement.

Atomic-Scale Engineering of CuOx-Au Interfaces over AuCu Single-Nanoparticles

A face-centered tetragonal (fct) AuCu particle with a size of 7.1 nm and an Au/Cu molar ratio of 1/1 was coated by a silica shell of 6 nm thickness. Segregation of Cu atoms from the metal particle under an oxidative atmosphere precisely mediated the CuO_x-Au interfacial structure by simply varying the temperature. As raising the temperature from 473 to 773 K, more Cu atoms emigrated from the AuCu particle and were oxidized into CuO_x layers that grew up to 0.8 nm in thickness. Simultaneously, the size of the Au-rich particle lowered moderately while the crystalline structure transformed from the fct phase into the face-centered cubic (fcc) phase. The CuO_x-Au interface shifted from the CuO_x monolayer bound to Au single-atoms to Au@CuO_x core-shell geometry, while the catalytic activity for CO oxidation at 433 K decreased dramatically. Moreover, a sharp loss in activity was observed as the crystal-phase transition occurred. This change in catalytic performance was ascribed to the geometrical configuration at the interfacial sites: the synergetic effect between the fct-AuCu particle and CuO_x monolayer contributed to the much higher activity, whereas the fcc-AuCu/Au particle weakened its interaction with the thicker CuO_x layer and thus decreased the activity.

Emerging Heterogeneous Supports for Efficient Electrocatalysis

Electrocatalysis plays a fundamental role in many fields, such as metallurgy, medicine, chemical industry, and energy conversion. Anchoring active electrocatalysts with controllable loading and uniform dispersion onto suitable supports has become an attractive topic. This is because the supports can not only have the potential to improve catalytic activity and stability through the interaction between support and catalytic center, but also can reduce precious metal consumption by improving atomic utilization. Herein, recent theoretical and experimental progresses concerning the development of supports to anchor electrocatalytic materials are first reviewed. Next, their controllable syntheses, characterization techniques, metal-support electronic interactions, and structure-performance relationships are presented. Some representative carbon supports and non-carbonaceous supports, as well as recently reported star supports such as 2D supports, single atom catalysts, and self-supported catalysts are also summarized. In addition, the significant role of support in stabilizing and regulating catalytic active sites is particularly emphasized. Finally, challenges, opportunities, key problems, and further promising solutions for supported catalysts are proposed.

Heterostructured V-Doped Ni2 P/Ni12 P5 Electrocatalysts for Hydrogen Evolution in Anion Exchange Membrane Water Electrolyzers

Regulating the electronic structure and intrinsic activity of catalysts' active sites with optimal hydrogen intermediates adsorption is crucial to enhancing the hydrogen evolution reaction (HER) in alkaline media. Herein, a heterostructured V-doped Ni₂ P/Ni₁₂ P₅ (V-Ni₂ P/Ni₁₂ P₅ ) electrocatalyst is  fabricated through a hydrothermal treatment and controllable phosphidation process. In comparison with pure-phase V-Ni₂ P, in/ex situ characterizations and theoretical calculations reveal a redistribution of electrons and active sites in V-Ni₂ P/Ni₁₂ P₅ due to the V doping and heterointerfaces effect. The strong coupling between Ni₂ P and Ni₁₂ P₅ at the interface leads to an increased electron density at interfacial Ni sites while depleting at P sites, with V-doping further promoting the electron accumulation at Ni sites. This is accompanied by the change of active sites from the anionic P sites to the interfacial Ni-V bridge sites in V-Ni₂ P/Ni₁₂ P₅ . Benefiting from the interface electronic structure, increased number of active sites, and optimized H-adsorption energy, the V-Ni₂ P/Ni₁₂ P₅ exhibits an overpotential of 62 mV to deliver 10 mA cm^-2 and excellent long-term stability for HER. The V-Ni₂ P/Ni₁₂ P₅ catalyst is applied for anion exchange membrane water electrolysis to deliver superior performance with a current density of 500 mA cm^-2 at a cell voltage of 1.79 V and excellent durability.

Isolating Single and Few Atoms for Enhanced Catalysis

Atomically dispersed metal catalysts have triggered great interest in the field of catalysis owing to their unique features. Isolated single or few metal atoms can be anchored on substrates via chemical bonding or space confinement to maximize atom utilization efficiency. The key challenge lies in precisely regulating the geometric and electronic structure of the active metal centers, thus significantly influencing the catalytic properties. Although several reviews have been published on the preparation, characterization, and application of single-atom catalysts (SACs), the comprehensive understanding of SACs, dual-atom catalysts (DACs), and atomic clusters has never been systematically summarized. Here, recent advances in the engineering of local environments of state-of-the-art SACs, DACs, and atomic clusters for enhanced catalytic performance are highlighted. Firstly, various synthesis approaches for SACs, DACs, and atomic clusters are presented. Then, special attention is focused on the elucidation of local environments in terms of electronic state and coordination structure. Furthermore, a comprehensive summary of isolated single and few atoms for the applications of thermocatalysis, electrocatalysis, and photocatalysis is provided. Finally, the potential challenges and future opportunities in this emerging field are presented. This review will pave the way to regulate the microenvironment of the active site for boosting catalytic processes.

Synergistic Effect of Surface Acidity and PtOx Catalyst on the Sensitivity of Nanosized Metal-Oxide Semiconductors to Benzene

Benzene is a potentially carcinogenic volatile organic compound (VOC) and its vapor must be strictly monitored in air. Metal-oxide semiconductors (MOS) functionalized by catalytic noble metals are promising materials for sensing VOC, but basic understanding of the relationships of materials composition and sensors behavior should be improved. In this work, the sensitivity to benzene was comparatively studied for nanocrystalline n-type MOS (ZnO, In₂O₃, SnO₂, TiO₂, and WO₃) in pristine form and modified by catalytic PtO_x nanoparticles. Active sites of materials were analyzed by X-ray photoelectron spectroscopy (XPS) and temperature-programmed techniques using probe molecules. The sensing mechanism was studied by in situ diffuse-reflectance infrared (DRIFT) spectroscopy. Distinct trends were observed in the sensitivity to benzene for pristine MOS and nanocomposites MOS/PtO_x. The higher sensitivity of pristine SnO₂, TiO₂, and WO₃ was observed. This was attributed to higher total concentrations of oxidation sites and acid sites favoring target molecules' adsorption and redox conversion at the surface of MOS. The sensitivity of PtO_x-modified sensors increased with the surface acidity of MOS and were superior for WO₃/PtO_x. It was deduced that this was due to stabilization of reduced Pt sites which catalyze deep oxidation of benzene molecules to carbonyl species.

Atomically Dispersed Fe-N5 Sites Anchored on 3D N-Doped Porous Carbon for Efficient Selective Oxidation of Aromatic Alkanes at Room Temperature

On account of the increasing demand for aromatic ketones and the challenging task of mass production in the chemical industry, efficient and sustainable catalysts are urgently needed to catalyze the conversion of aromatic alkyl compounds into high value-added products via the activation of C-H bonds. Herein, Fe single-site atoms anchored on a N-doped three-dimensional (3D) porous carbon nanostructure (Fe-MEG-800) synthesized through the self-assembly hydrothermal method are reported. Detailed characterization analyses, such as aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM), are employed to prove the isolated single Fe atom dispersing on the carbon nanostructure, along with X-ray absorption spectroscopy (XAS) and Mössbauer spectroscopy analysis confirming the Fe-N₅ coordination structure. Furthermore, the 3D cross-linked structure not only provides an abundant open-framework structure for the mass transfer during the reaction but also facilitates the exposure of more active sites and promotes the reaction procedure. The as-prepared catalyst possesses high catalytic activity toward the C-H bond at room temperature. In the model reaction of oxidizing ethylbenzene (EB) to high-value acetophenone (AcPO), the conversion and the selectivity of the reaction are both over 99%. In addition, the catalyst also presents favorable stability with retaining high performance even after eight cycles. The possible adsorption sites of the reactant and oxidant are explored through density functional theory (DFT) calculations. Based on the analysis of experimental and theoretical results, a possible mechanism for the oxidation of EB to AcPO involving •OH, O₂^•-, and ¹O₂ is also proposed.

Electronic Metal-Support Interaction Directing the Design of Fe(III)-Based Catalysts for Efficient Advanced Oxidation Processes by Dual Reaction Paths

Persistent organic pollutants (POPs) have a huge impact on human health due to their high toxicity and non-degradability. It is still of great difficulty to develop highly efficient catalysts toward the degradation of POPs. Herein, it is reported that regulating electronic structure of quasi-single atomic ferric iron (Fe(III)) in the VO₂ support through the electronic metal-support interaction (EMSI) is a versatile strategy to enhance the catalytic activity. Activated Fe(III) can react with peroxydisulfate (PDS) to produce both radicals and high-valent iron (HVFe) simultaneously for the efficient and fast degradation of POPs. Density functional theory (DFT) calculations prove that the influence of EMSI promotes the electrons on Fe(III) 3d-bond center moving close to the Fermi level, facilitating the charge transfer from Fe(III) to the adsorbate. Through the control experiments, both the radical path by PDS and the HVFe path aroused by the EMSI are confirmed in the POP degradation process. Consequently, the Fe/VO₂ catalyst exhibits record-breaking catalytic activity with the k-value as high as 56.7, 43.3 µmol s^-1 g^-1 for p-chlorophenol and 2,4-dichlorophenol degradation, respectively.

Elucidation of Structure-Activity Relations in Proton Electroreduction at Pd Surfaces: Theoretical and Experimental Study

The structure-activity relationship is a cornerstone topic in catalysis, which lays the foundation for the design and functionalization of catalytic materials. Of particular interest is the catalysis of the hydrogen evolution reaction (HER) by palladium (Pd), which is envisioned to play a major role in realizing a hydrogen-based economy. Interestingly, experimentalists observed excess heat generation in such systems, which became known as the debated "cold fusion" phenomenon. Despite the considerable attention on this report, more fundamental knowledge, such as the impact of the formation of bulk Pd hydrides on the nature of active sites and the HER activity, remains largely unexplored. In this work, classical electrochemical experiments performed on model Pd(hkl) surfaces, "noise" electrochemical scanning tunneling microscopy (n-EC-STM), and density functional theory are combined to elucidate the nature of active sites for the HER. Results reveal an activity trend following Pd(111) > Pd(110) > Pd(100) and that the formation of subsurface hydride layers causes morphological changes and strain, which affect the HER activity and the nature of active sites. These findings provide significant insights into the role of subsurface hydride formation on the structure-activity relations toward the design of efficient Pd-based nanocatalysts for the HER.

Obstructed Surface States as the Descriptor for Predicting Catalytic Active Sites in Inorganic Crystalline Materials

The discovery of new catalysts that are efficient and sustainable is a major research endeavor for many industrial chemical processes. This requires an understanding and determination of the catalytic origins, which remains a challenge. Here, a novel method to identify the position of active sites based on searching for crystalline symmetry-protected obstructed atomic insulators (OAIs) that have metallic surface states is described. The obstructed Wannier charge centers (OWCCs) in OAIs are pinned by symmetries at some empty Wyckoff positions so that surfaces that accommodate these sites are guaranteed to have metallic obstructed surface states (OSSs). It is proposed and confirmed that the OSSs are the catalytic activity origins for crystalline materials. The theory on 2H-MoTe₂ , 1T'-MoTe₂ , and NiPS₃ bulk single crystals is verified, whose active sites are consistent with the calculations. Most importantly, several high-efficiency catalysts are successfully identified just by considering the number of OWCCs and the symmetry. Using the real-space-invariant theory applied to a database of 34 013 topologically trivial insulators, 1788 unique OAIs are identified, of which 465 are potential high-performance catalysts. The new methodology will facilitate and accelerate the discovery of new catalysts for a wide range of heterogeneous redox reactions.

Artificial Metalloproteins: At the Interface between Biology and Chemistry

Artificial metalloproteins (ArMs) have recently gained significant interest due to their potential to address issues in a broad scope of applications, including biocatalysis, biotechnology, protein assembly, and model chemistry. ArMs are assembled by the incorporation of a non-native metallocofactor into a protein scaffold. This can be achieved by a number of methods that apply tools of chemical biology, computational de novo design, and synthetic chemistry. In this Perspective, we highlight select systems in the hope of demonstrating the breadth of ArM design strategies and applications and emphasize how these systems address problems that are otherwise difficult to do so with strictly biochemical or synthetic approaches.

Self-Assembly Vertical Graphene-Based MoO3 Nanosheets for High Performance Supercapacitors

Supercapacitors have been extensively studied due to their advantages of fast-charging and discharging, high-power density, long-cycling life, low cost, etc. Exploring novel nanomaterial schemes for high-performance electrode materials is of great significance. Herein, a strategy to combine vertical graphene (VG) with MoO₃ nanosheets to form a composite VG/MoO₃ nanostructure is proposed. VGs as transition layers supply rich active sites for the growth of MoO₃ nanosheets with increasing specific surface areas. The VG transition layer further improves the electric contact and adhesion of the MoO₃ electrode, simultaneously stabilizing its volume and crystal structure during repeated redox reactions. Thus, the prepared VG/MoO₃ nanosheets have been demonstrated to exhibit excellent electrochemical properties, such as high reversible capacitance, better cycling performance, and high-rate capability.

Quinoline, with the active site of 8-hydroxyl, efficiently inhibits Micropterus salmoides rhabdovirus (MSRV) infection in vitro and in vivo

Micropterus salmoides rhabdovirus (MSRV) is an significant pathogen that causes high mortality and related economic losses in bass aquaculture. There is no effective or approved therapy to date. In this study, we evaluated the anti-MSRV effects of 22 quinoline derivatives in grass carp ovary (GCO) cells. Among these compounds, 8-hydroxyquinoline exhibited valid inhibition in decreasing MSRV nucleoprotein gene expression levels of 99.3% with a half-maximal inhibitory concentrations (IC₅₀ ) value of 4.66 μM at 48 h. Moreover, 8-hydroxyquinoline significantly enhanced a protective effect in GCO cells by reducing the cytopathic effect (CPE). By comparing the anti-MSRV activity of 22 quinoline derivatives, we found that 8-hydroxyquinoline possessed the efficient active site of 8-hydroxyl and inhibited MSRV infection in vitro. For in vivo studies, 8-hydroxyquinoline via intraperitoneal injection exhibited an antiviral effect in MSRV-infected largemouth bass by substantially enhancing the survival rate by 15.0%. Importantly, the viral loads in the infected largemouth bass notably reduced in the spleen on the third days post-infection. Overall, 8-hydroxyquinoline was considered to be an efficient agent against MSRV in aquaculture.

Nanoscale Double-Heterojunctional Electrocatalyst for Hydrogen Evolution

The active sites and charge/mass transfer properties in electrocatalysts play vital roles in kinetics and thermodynamics of electrocatalysis, and impose direct impacts on electrocatalytic performance, which cannot be achieved by a simplex structure. As a prototype, the authors propose a double-heterojunctional nanostructure of NiS₂ /Ni₃ C@C containing NiS₂ /Ni₃ C and Ni₃ C/C heterojunctions as a general model to optimize the above issues and boost electrocatalytic performance. During the thermal reorganization, the in situ reaction between NiS₂ nanoparticles and carbon induces the formation of Ni₃ C between them and constructs tightly contacted two kinds of interfaces among the three components. The TEM and XPS reveal the intimately contacted three components and the as-constructed interacted dual interfaces, further confirming the formation of a porous double-heterojunctional nanostructure. Theoretical calculations uncover that the electron density redistribution occurs at Ni₃ C/C interface by spontaneous electron transfer from defected carbon to Ni₃ C and lower ΔG_H* achieves at NiS₂ /Ni₃ C interface by the concentrated interfacial charge density, which favors the simultaneous realization of high catalytic activity and rapid charge/mass transfer. When applied for hydrogen evolution reaction (HER), the porous double-heterojunctional NiS₂ /Ni₃ C@C exhibits excellent HER activity and durability among all pH values. Profoundly, this special double-heterojunctional structure can provide a new model for high-performance electrocatalysts and beyond.

Promoted Electron Transfer and Surface Absorption by Single Nickel Atoms for Photocatalytic Cross-Coupling of Aromatic Alcohols and Aliphatic Amines under Visible Light

The preparation of imines has drawn increasing attention as they are fundamental intermediates in the production of pharmaceuticals, agricultures, and fine chemicals. Nevertheless, current approaches for imines synthesis mainly focus on thermally driven reactions which always involve the consumption of high price noble metal catalysts, expensive ligands, strong base, and harsh reaction conditions. Herein, we demonstrate single atom nickel anchored on polymeric carbon nitride (Ni-SA@PCN) in Ni-N₄ structure for visible light-promoted crossed coupling between aromatic alcohols and aliphatic amines. As expected, the Ni atoms dispersed carbon nitride demonstrates an obviously improved charge separation and transfer as reflected in UV-vis, fluorescence intensity and lifetime, photocurrent density, and electrochemical impedance characterizations. More impressively, the density functional theory (DFT) calculations also reveals that the presence of Ni atoms can dramatically accelerate the absorption of reactive substrates on the surface of PCN. The decreased absorption energy from -0.51 to -3.35 eV, associated with increased O═O bond length from 1.226 to 1.371 Å indicates a huge advantage of single Ni atom on oxygen activation. As a result, the obtained Ni-SA@PCN photocatalyst shows a prominent catalytic efficiency in imines formation with a reaction conversion of 73% and selectivity of >99%. Lastly, the photocatalytic reactions displays an excellent compatibility with various imines being achieved with high yield.

Simultaneous Phenol Removal and Resource Recovery from Phenolic Wastewater by Electrocatalytic Hydrogenation

Efficient pollutants removal and simultaneous resource recovery from wastewater are of great significance for sustainable development. In this study, an electrocatalytic hydrogenation (ECH) approach was developed to selectively and rapidly transform phenol to cyclohexanol, which possesses high economic value and low toxicity and can be easily recovered from the aqueous solution. A three-dimensional Ru/TiO₂ electrode with abundant active sites and massive microflow channels was prepared for efficient phenol transformation. A pseudo-first-order rate constant of 0.135 min^-1 was observed for ECH of phenol (1 mM), which was 34-fold higher than that of traditional electrochemical oxidation (EO). Both direct electron transfer and indirect reduction by atomic hydrogen (H*) played pivotal roles in the hydrogenation of phenol ring. The ECH technique also showed excellent performance in a wide pH range of 3-11 and with a high concentration of phenol (10 mM). Moreover, the functional groups (e.g., chloro- and methyl-) on phenol showed little influence on the superiority of the ECH system. This work provides a novel and practical solution for remediation of phenolic wastewater as well as recovery of valuable organic compounds.

Sacrificial W Facilitates Self-Reconstruction with Abundant Active Sites for Water Oxidation

Water oxidation is an important reaction for multiple renewable energy conversion and storage-related devices and technologies. High-performance and stable electrocatalysts for the oxygen evolution reaction (OER) are urgently required. Bimetallic (oxy)hydroxides have been widely used in alkaline OER as electrocatalysts, but their activity is still not satisfactory due to insufficient active sites. In this research, A unique and efficient approach of sacrificial W to prepare CoFe (oxy)hydroxides with abundant active species for OER is presented. Multiple ex situ and operando/in situ characterizations have validated the self-reconstruction of the as-prepared CoFeW sulfides to CoFe (oxy)hydroxides in alkaline OER with synchronous W etching. Experiments and theoretical calculations show that the sacrificial W in this process induces metal cation vacancies, which facilitates the in situ transformation of the intermediate metal hydroxide to CoFe-OOH with more high-valence Co(III), thus creating abundant active species for OER. The Co(III)-rich environment endows the in situ formed CoFe oxyhydroxide with high catalytic activity for OER on a simple flat glassy carbon electrode, outperforming those not treated by the sacrificial W procedure. This research demonstrates the influence of etching W on the electrocatalytic performance, and provides a low-cost means to improve the active sites of the in situ self-reconstructed bimetallic oxyhydroxides for OER.

Screening and Understanding Lattice Silicon-Controlled Catalytically Active Site Motifs from a Library of Transition Metal-Silicon Intermetallics

A joint theoretical and experimental study is reported to systematically explore over a library of transition metal-silicon intermetallics for understanding silicon-controlled active site motifs and discovering hydrogen-evolving electrocatalysts. On the one hand, every low-index surface termination of 115 transition metal (M)-silicon (Si) intermetallics is enumerated, followed by cataloging of stable adsorption sites and prediction of catalytic activities on the main exposed facets. It is theoretically found that silicon atoms in silicon-rich structures (especially MSi₂ and MSi) show a strong site-isolating effect, which can eliminate M-M-M hollow and M-M bridge sites with too strong hydrogen-binding ability and thereby provide great opportunities for the exposure of novel highly active sites (e.g., M-top and Si-related sites). On the other hand, solid-state redox reactions are developed to synthesize a set of 24 silicides containing 5 MSi, 13 MSi₂ , and 6 others, most of which are phase-pure samples. The experimental studies demonstrate that too rich silicon content in silicides (e.g., MSi₂ ) leads to adverse effects, such as the formation of amorphous SiO_x layers on the silicide surface, masking the presence of active sites during electrocatalysis. Finally, 5 MSi (M = Rh, Pd, Pt, Ru, Ir) as highly active hydrogen-evolving electrocatalysts are identified.

Activating Surface Lattice Oxygen of a Cu/Zn1-xCuxO Catalyst through Interface Interactions for CO Oxidation

Surface lattice oxygen in metal oxides is a common participant in many chemical reactions. Given this, the structural design of catalysts to activate lattice oxygen and moreover investigations into the effect of lattice oxygen on reaction pathways are hot topics. With this in mind, herein we prepare CuO-Zn_1-xCu_xO (ZCO) nanofibers akin to the Trojan horse legend and via an in situ reduction obtain activated Cu/Zn_1-xCu_xO (Cu/ZCO) nanofibers. X-ray absorption spectroscopy and X-ray photoelectron spectroscopy reveal that surface lattice oxygen of Cu/ZCO is effectively activated from inert O^2- to reactive O^2-x. This activation stems from the enhanced covalence of metal-oxygen bonds and the electron transfer between Cu and the support. Online mass spectrometry reveals that Cu/ZCO with activated lattice oxygen exhibits a higher Mars-van Krevelen reaction efficiency during the CO oxidation process. This study offers a new avenue to engineer interface interactions, given, as highlighted here, the importance of surface lattice oxygen in oxide supports during the catalytic process.