Halogen Bonding Helicates Encompassing Iodonium Cations

Fluoro and Trifluoromethyl Benzoyl Hypoiodite Complexes with Substituted Pyridines

Based on the prior observation of the trifluoroacetate hypoiodite, CF3C(O)OI, demonstrating the largest σ-hole of a neutral halogen bond donor, a series of mono- and bis-carbonyl hypoiodites utilising trifluoromethyl or fluorine substituents at various positions of a parent benzoyl skeleton have been synthesised. The carbonyl hypoiodite complexes were prepared via cation exchange of the silver(I) cations with iodine(I) from the respective silver(I) carboxylates and dicarboxylates as the synthetic precursors. A range of pyridinic Lewis bases of varying nucleophilicities were used to stabilise the carbonyl hypoiodites to further probe their properties. The silver(I) intermediates with these Lewis bases were also isolated for silver(I) pentafluorobenzoate, providing additional insight into the cation exchange reaction. All complexes were characterised both in solution (1H, 1H-15N HMBC, 19F) and in the solid state (SCXRD), permitting insights into the formation of the elusive pyridine-iodine(I) cation.

Ortho-Substituent Effects on Halogen Bond Geometry for N-Haloimide⋯2-Substituted Pyridine Complexes

The nature of (imide)N-X⋯N(pyridine) halogen-bonded complexes formed by six N-haloimides and sixteen 2-substituted pyridines are studied using X-ray crystallography (68 crystal structures), Density Functional Theory (DFT) (86 complexation energies), and NMR spectroscopy (90 association constants). Strong halogen bond (XB) donors such as N-iodosuccinimide form only 1:1 haloimide:pyridine crystalline complexes, but even stronger N-iodosaccharin forms 1:1 haloimide:pyridine and three other distinct complexes. In 1:1 haloimide:pyridine crystalline complexes, the haloimide's N─X bond exhibits an unusual bond bending feature that is larger for stronger N-haloimides. DFT complexation energies (ΔEXB ) for iodoimide-pyridine complexes range from -44 to -99 kJ mol-1 , while for N-bromoimide-pyridine, they are between -31 and -77 kJ mol-1 . The ΔEXB of I⋯N XBs in 1:1 iodosaccharin:pyridine complexes are the largest of their kind, but they are substantially smaller than those in [bis(saccharinato)iodine(I)]pyridinium salts (-576 kJ mol-1 ), formed by N-iodosaccharin and pyridines. The NMR association constants and ΔEXB energies of 1:1 haloimide:pyridine complexes do not correlate as these complexes in solution are heavily influenced by secondary interactions, which DFT studies do not account for. Association constants follow the σ-hole strengths of N-haloimides, which agree with DFT and crystallography data. The haloimide:2-(N,N-dimethylamino)pyridine complex undergoes a halogenation reaction resulting in 5-iodo-2-dimethylaminopyridine.

Halogen Bonds of Halogen(I) Ions─Where Are We and Where to Go?

Halenium ions, X+, are particularly strong halogen-bond donors that interact with two Lewis bases simultaneously to form linear [D···X···D]+-type halonium complexes. Their three-center, four-electron halogen bond is both fundamentally interesting and technologically valuable as it tames the reactivity of halogen(I) ions, opening up new horizons in a variety of fields including synthetic organic and supramolecular chemistry. Understanding this bonding situation enables the development of improved halogen(I) transfer reactions and of advanced functional materials. Following a decade of investigations of basic principles, the range of applications is now rapidly widening. In this Perspective, we assess the status of the field and identify its key advances and the main bottlenecks. Clearing common misunderstandings that may hinder future progress, we aim to inspire and direct future research efforts.

The Impact of ortho-substituents on Bonding in Silver(I) and Halogen(I) Complexes of 2-Mono- and 2,6-Disubstituted Pyridines: An In-Depth Experimental and Theoretical Study

The coordination nature of 2-mono- and 2,6-disubstituted pyridines with electron-withdrawing halogen and electron-donating methyl groups for [N-X-N]+ (X=I, Br) complexations have been studied using 15 N NMR, X-ray crystallography, and Density Functional Theory (DFT) calculations. The 15 N NMR chemical shifts reveal iodine(I) and bromine(I) prefer to form complexes with 2-substituted pyridines and only 2,6-dimethylpyridine. The crystalline halogen(I) complexes of 2-substituted pyridines were characterized by using X-ray diffraction analysis, but 2,6-dihalopyridines were unable to form stable crystalline halogen(I) complexes due to the lower nucleophilicity of the pyridinic nitrogen. In contrast, the halogen(I) complexes of 2,6-dimethylpyridine, which has a more basic nitrogen, are characterized by X-crystallography, which complements the 15 N NMR studies. DFT calculations reveal that the bond energies for iodine(I) complexes vary between -291 and -351 kJ mol-1 and for bromine between -370 and -427 kJ mol-1 . The bond energies of halogen(I) complexes of 2-halopyridines with more nucleophilic nitrogen are 66-76 kJ mol-1 larger than those of analogous 2,6-dihalopyridines with less nucleophilic nitrogen. The experimental and DFT results show that the electronic influence of ortho-halogen substituents on pyridinic nitrogen leads to a completely different preference for the coordination bonding of halogen(I) ions, providing new insights into bonding in halogen(I) chemistry.

Halogen Bonding and/or Covalent Bond: Analogy of 3c-4e N···I···X (X = Cl, Br, I, and N) Interactions in Neutral, Cationic, and Anionic Complexes

X-ray structural measurements and computational analysis demonstrated the similarity of the geometries and electronic structures of the X-I···N (X = Cl, Br, I, and N) bonding in strong halogen-bonded (HaB) complexes and in the anionic or cationic halonium ions. In particular, I···N bond lengths in the solid-state associations formed by strong HaB donors (e.g., I2, IBr, ICl, and N-iodosuccinimide) and acceptors (e.g., quinuclidine or pyridines) were in the same range of 2.3 ± 0.1 Å as those in the halonium ions [e.g., the bis(quinuclidine)iodonium cation or the 1,1'-iodanylbis(pyrrolidine-2,5-dione) anion]. In all cases, bond lengths were much closer to those of the N-I covalent bond than to the van der Waals separations of these atoms. The strong N···I bonding in the HaB complexes led to a substantial charge transfer, lengthening and weakening of the I···X bonds, and polarization of the HaB donors. As a result, the central iodine atoms in the strong HaB complexes bear partial positive charges akin to those in the halonium ions. The energies and Mayer bond orders for both N···I and I···X bonds in such associations are also comparable to those in the halonium ions. The similarity of the bonding in such complexes and in halonium ions was further supported by the analysis of electron densities and energies at bond critical (3, -1) points in the framework of the quantum theory of atoms in molecules and by the density overlap region indicator. Overall, all these data point out the analogy of the symmetric N···I···N bonding in the halonium ions and the asymmetric X···I···N bonding in the strong HaB complexes, as well as the weakly covalent character of these 3c-4e interactions.

Supramolecular axial chirality in [N-I-N]+-type halogen bonded dimers

Axial chiral molecules are extensively used as skeletons in ligands for asymmetric catalysis and as building blocks of chiroptical materials. Designing axial chirality at the supramolecular level potentially endows a material with dynamic tunability and adaptivity. In this work, for the first time, we have reported a series of halogen-bonded dimeric complexes with axial chirality that were formed by noncovalent bonds. The [N-I-N]+-type halogen bond is highly directional and freely rotatable with good linearity and ultra-high bond energy; this bond was introduced to couple quinoline moieties with chiral substitutes. The resultant dimers were stable in solutions with thermo-resistance. Prominent steric effects from the 2' chiral pendant allowed the chirality to be transferred to aryl skeletons with induced preferred axial chirality and optical activities. Halogen-bonded complexation presented visible emissions to afford luminescent axial chiral materials, whereby circularly polarized fluorescence and phosphorescence were achieved. The [N-I-N]+-type halogen bond performed as a powerful tool to construct functional axial chiral compounds, enriching the toolbox for asymmetric synthesis and optics.

Linear bis-Coordinate Silver(I) and Iodine(I) Complexes with R3 R2 R1 N Tertiary Amines

Homoleptic [L-I-L]+ iodine(I) complexes (where L is a R3 R2 R1 N tertiary amine) were synthesized via the [L-Ag-L]+ → [L-I-L]+ cation exchange reaction. In solution, the amines form [R3 R2 R1 N-Ag-NR1 R2 R3 ]+ silver(I) complexes, which crystallize out from solution as the meso-[L-Ag-L]+ complexes, as characterized by X-ray crystallography. The subsequent [L-I-L]+ iodine(I) analogues were extremely reactive and could not be isolated in the solid state. Density functional theory (DFT) calculations were performed to study the Ag+ -N and I+ -N interaction energies in silver(I) and iodine(I) complexes, with the former ranging from -80 to -100 kJ mol-1 and latter from -260 to -279 kJ mol-1 . The X-ray crystal structures revealed Ag+ ⋅⋅⋅Cπ and Ag+ ⋅⋅⋅H-C short contacts between the silver(I) cation and flexible N-alkyl/N-aryl groups, which are the first of their kind in such precursor complexes.

N-X⋅⋅⋅O-N Halogen Bonds in Complexes of N-Haloimides and Pyridine-N-oxides: A Large Data Set Study

N-X⋅⋅⋅- O-N+ halogen-bonded systems formed by 27 pyridine N-oxides (PyNOs) as halogen-bond (XB) acceptors and two N-halosuccinimides, two N-halophthalimides, and two N-halosaccharins as XB donors are studied in silico, in solution, and in the solid state. This large set of data (132 DFT optimized structures, 75 crystal structures, and 168 1 H NMR titrations) provides a unique view to structural and bonding properties. In the computational part, a simple electrostatic model (SiElMo) for predicting XB energies using only the properties of halogen donors and oxygen acceptors is developed. The SiElMo energies are in perfect accord with energies calculated from XB complexes optimized with two high-level DFT approaches. Data from in silico bond energies and single-crystal X-ray structures correlate; however, data from solution do not. The polydentate bonding characteristic of the PyNOs' oxygen atom in solution, as revealed by solid-state structures, is attributed to the lack of correlation between DFT/solid-state and solution data. XB strength is only slightly affected by the PyNO oxygen properties [(atomic charge (Q), ionization energy (Is,min ) and local negative minima (Vs,min )], as the σ-hole (Vs,max ) of the donor halogen is the key determinant leading to the sequence N-halosaccharin>N-halosuccinimide>N-halophthalimide on the XB strength.

Iodine(I) and Silver(I) Complexes Incorporating 3-Substituted Pyridines

Building upon the first report of a 3-acetaminopyridine-based iodine(I) complex (1b) and its unexpected reactivity toward ^tBuOMe, several new 3-substituted iodine(I) complexes (2b-5b) have been synthesized. The iodine(I) complexes were synthesized from their analogous silver(I) complexes (2a-5a) via a silver(I) to iodine(I) cation exchange reaction, incorporating functionally related substituents as 3-acetaminopyridine in 1b; 3-acetylpyridine (3-Acpy; 2), 3-aminopyridine (3-NH₂py; 3), and 3-dimethylaminopyridine (3-NMe₂py; 4), as well as the strongly electron-withdrawing 3-cyanopyridine (3-CNpy; 5), to probe the possible limitations of iodine(I) complex formation. The individual properties of these rare examples of iodine(I) complexes incorporating 3-substituted pyridines are also compared to each other and contrasted to their 4-substituted counterparts which are more prevalent in the literature. While the reactivity of 1b toward etheric solvents could not be reproduced in any of the functionally related analogues synthesized herein, the reactivity of 1b was further expanded to a second etheric solvent. Reaction of bis(3-acetaminopyridine)iodine(I) (1b) and ⁱPr₂O gave [3-acetamido-1-(3-iodo-2-methylpentan-2-yl)pyridin-1-ium]PF₆ (1d), which demonstrated potentially useful C-C and C-I bond formation under ambient conditions.

Cyclic Homo- and Heterohalogen Di-λ3-diarylhalonium Structures

In the context of the ever-growing interest in the cyclic diaryliodonium salts, this work presents synthetic design principles for a new family of structures with two hypervalent halogens in the ring. The smallest bis-phenylene derivative, [(C₆H₄)₂I₂]²⁺, was prepared through oxidative dimerization of a precursor bearing the ortho-disposed iodine and trifluoroborate groups. We also report, for the first time, the formation of cycles containing two different halogen atoms. These present two phenylenes linked by hetero-(I/Br) or -(I/Cl) halogen pairs. This approach was also extended to the cyclic bis-naphthylene derivative [(C₁₀H₆)₂I₂]²⁺. The structures of these bis-halogen(III) rings were further assessed through X-ray analysis. The simplest cyclic phenylene bis-iodine(III) derivative features the interplanar angle of ∼120°, while a smaller angle of ∼103° was found for the analogous naphthylene-based salt. All dications form dimeric pairs through a combination of π-π and C-H/π interactions. As the largest member of the family, a bis-I(III)-macrocycle was also assembled using the quasi-planar xanthene backbone. Its geometry enables the two iodine(III) centers to be bridged intramolecularly by two bidentate triflate anions. In a preliminary manner, the interaction of the phenylene- and naphthalene-based bis-iodine(III) dications with a new family of rigid bidentate bis-pyridine ligands was studied in solution and the solid state, with an X-ray structure showing the chelating donor bonding to just one of the two iodine centers.

Structure and Bonding of Halonium Compounds

The geometrical parameters and the bonding in [D···X···D]⁺ halonium compounds, where D is a Lewis base with N as the donor atom and X is Cl, Br, or I, have been investigated through a combined structural and computational study. Cambridge Structural Database (CSD) searches have revealed linear and symmetrical [D···X···D]⁺ frameworks with neutral donors. By means of density functional theory (DFT), molecular electrostatic potential (MEP), and energy decomposition analyses (EDA) calculations, we have studied the effect of various halogen atoms (X) on the [D···X···D]⁺ framework, the effect of different nitrogen-donor groups (D) attached to an iodonium cation (X = I), and the influence of the electron density alteration on the [D···I···D]⁺ halonium bond by variation of the R substituents at the N-donor upon the symmetry, strength, and nature of the interaction. The physical origin of the interaction arises from a subtle interplay between electrostatic and orbital contributions (σ-hole bond). Interaction energies as high as 45 kcal/mol suggest that halonium bonds can be exploited for the development of novel halonium transfer agents, in asymmetric halofunctionalization or as building blocks in supramolecular chemistry.

Solid-state NMR Spectroscopy of Iodine(I) Complexes

Solid-state NMR has been applied to a series of Barluenga-type iodine(I) [L-I-L]PF₆ (L=pyridine, 4-ethylpyridine, 4-dimethylaminopyridine, isoquinoline) complexes as their hexafluorophosphate salts, as well as their respective non-liquid ligands (L), their precursor silver(I) complexes, and the respective N-methylated pyridinium and quinolinium hexafluorophoshate salts. These results are compared and contrasted to the corresponding solution studies and single-crystal X-ray structures. As the first study of its kind on the solid-state NMR behavior of halogen(I) complexes, practical considerations are also discussed to encourage wider utilization of this technique in the future.

Three-Component Perfluoroalkylvinylation of Alkenes Enabled by Dual DBU/Fe Catalysis

Herein, a simple and efficient strategy that involves dual 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)/iron-catalyzed alkene perfluoroalkylvinylation by using perfluoroalkyl iodides and 2-aminonaphthalene-1,4-diones as coupling partners is demonstrated. In terms of the developed catalytic system, various styrenes and aliphatic alkenes are well-tolerated, leading to the accurate preparation of perfluoroalkyl-containing 2-aminonaphthalene-1,4-diones in excellent regioselectivity. Moreover, the protocol can be readily applied in late-stage modifications of natural products and pharmaceuticals. The title reactions are featured by easily accessible and inexpensive catalysts and substrates, broad substrate applicability, and mild reaction conditions. Mechanistic investigations reveal a tandem C-I cleavable alkylation and C-C vinylation enabled by cooperative DBU/iron catalysis.

[N···I···N]+ Type Halogen-Bonding-Driven Supramolecular Helical Polymers with Modulated Chirality

The [N···I···N]⁺ type halogen bond has been utilized to synthesize supramolecular architectures, while the applications in constructing helical motifs and modulating supramolecular chirality have been unexplored so far. In this work, the [N···I···N]⁺ halogen bond was introduced to drive the formation of supramolecular helical polymers via a Ag(I) coordination intermediate, showing tunable supramolecular chirality. Pyridine segments were conjugated to the asymmetric ferrocene skeleton, which show "open" and "closed" geometry depending on the sp² N positions. Coordination with Ag(I) generated one-dimensional (1D) double helices and 2D helicates featured the [Ag(O)···I···Ag(O)]⁺ bond, which further stacked into 3D porous frameworks with chiral channels and adjustable pore sizes. Ionic exchange afforded 1D supramolecular helical polymers in solution phases driven by the [N···I···N]⁺ type halogen bonds, which was evidenced by the experimental results and density functional theory calculation. Fc2 exclusively demonstrated tunable supramolecular chirality in the formation of coordinated and halogen bonded polymers. In addition, solvent change would further inverse the helicity of halogen bonded supramolecular helical polymers depending on the rotation of the ferrocenyl core whose "closed" and "open" states were accompanied by the breakage of intramolecular hydrogen bonds. This work introduces a [N···I···N]⁺ type ionic halogen bond to prepare supramolecular helical polymers, providing multiple protocols in regulating helicity by ion exchange and solvent environments.

Carbonyl hypoiodites from pivalic and trimesic acid and their silver(I) intermediates

The first tris(O-I-N) carbonyl hypoiodites have been synthesised based on trimesic acid and pyridine or 4-methylpyridine, with their structures definitively confirmed by single crystal X-ray diffraction (SCXRD). The more soluble carbonyl hypoiodites based on pivalic acid have also been studied via NMR, SCXRD, and computational analyses, enabling the study of the direct silver(I) precursor and intermediates of the resulting carbonyl hypoiodites generated using a range of substituted pyridines.

Iodine(i) complexes incorporating sterically bulky 2-substituted pyridines

The silver(i) and iodine(i) complexes of the 2-substituted pyridines 2-(diphenylmethyl)pyridine (1) and 2-(1,1-diphenylethyl)pyridine (2), along with their potential protonated side products, were synthesised to investigate the steric limitations of iodine(i) complex formation. The complexes were characterised by ¹H and ¹H–¹⁵N HMBC NMR, X-ray crystallography, and DFT calculations. The solid-state structures for the silver(i) and iodine(i) complexes were extensively compared to the literature and analysed by DFT to examine the influence of the sterically bulky pyridines and their anions.

The silver(i) and iodine(i) complexes of two sterically bulky 2-substituted pyridines, along with their potential protonated side products, were synthesised to investigate the steric limitations of iodine(i) ion formation.

Do 2-coordinate iodine(I) and silver(I) complexes form Nucleophilic Iodonium Interactions (NIIs) in solution?

The interaction of a [bis(pyridine)iodine(I)]+ cation with a [bis(pyridine)silver(I)]+ cation, in which an iodonium ion acts as nucleophile by transferring electron density to the silver(I) cation, is reinvestigated herein. No...

Intramolecular chalcogen bonding to tune molecular conformation of helical building block for supramolecular helix

We propose to employ intramolecular chalcogen bonding to make the helical building block take its otherwise unfavorable cis-conformation. 2,5-Thiophenediamide motif was taken to bridge two β-turn structures to lead to...

Dimeric iodine(i) and silver(i) cages from tripodal N-donor ligands via the [N–Ag–N]+ to [N–I–N]+ cation exchange reaction

Complexation of tripodal ligands with silver(I) salts generated M3L2 cage complexes that encapsulated anions within their cavities. Subsequent [N–Ag–N]+ to [N–I–N]+ cation exchange with I2 resulted in the corresponding halogen-bonded iodine(I) cages.

Iodine(I) and Silver(I) Complexes of Benzoimidazole and Pyridylcarbazole Derivatives

The synthesis of iodine(I) complexes with either benzoimidazole or carbazole-derived sp² N-containing Lewis bases is described, as well as their corresponding silver(I) complexes. The addition of elemental iodine to the linear two-coordinate Ag(I) complexes produces iodine(I) complexes with a three-center four-electron (3c-4e) [N-I-N]⁺ bond. The ¹ H and ¹ H-¹⁵ N HMBC NMR studies unambiguously confirm the formation of the complexes in all cases via the [N-Ag-N]⁺ →[N-I-N]⁺ cation exchange, with the ¹⁵ N NMR chemical shift change between 94 to 111 ppm when compared to the free ligand. The single crystal X-ray crystallographic studies on eight I⁺ complexes revealed highly symmetrical [N-I-N]⁺ bonds with I-N bond distances of 2.21-2.26 Å and N-I-N angles of 177-180°, whilst some of the corresponding Ag⁺ complexes showed a clear deviation from linearity with N-Ag-N angles of ca. 150° and Ag-N bond distances of 2.09-2.18 Å.

Macrocyclic complexes based on [N⋯I⋯N]+ halogen bonds

New 1-2 nm macrocyclic iodine(I) complexes prepared VIA a simple ligand exchange reaction manifest rigid 0.5-1 nm cavities that bind the hexafluorophosphate anion in the gas phase. The size of the cavities and the electrostatic interactions with the iodine(I) cations influence the anion binding properties of these macrocyclic complexes.

Dihypoiodites stabilised by 4-ethylpyridine through O-I-N halogen bonds

Four bis(O-I-N) compounds have been synthesised from various dihypoiodites and 4-ethylpyridine. The compounds were characterised in both the solution and solid states by NMR spectroscopy (¹H, ¹⁵N), X-ray diffraction, and computational calculations.

X⋅⋅⋅X Halogen Bond-Induced Supramolecular Helices

The halogen bond is the attractive interaction between the electrophilic region of a halogen atom and the nucleophilic region of another molecular entity, emerging as a favorable manner to manipulate supramolecular chirality in self-assemblies. Engineering halogen bonded helical structures remains a challenge due to its sensitivity to solvent polarity and competitive forces like hydrogen bonds. Herein, we report a X⋅⋅⋅X (X=Cl, Br, I) type weak halogen bond that induces the formation and evolution of supramolecular helical structures both in solid and solution state. The π-conjugated phenylalanine derivatives with F, Cl, Br and I substitution self-assembled into 2₁ helical packing driven by hydrogen bond and halogen bond, respectively. The specific molecular geometries of π-conjugated amino acids gave rise to multiple noncovalent forces to stabilize the X⋅⋅⋅X halogen bond with small bond energies ranging from -0.69 to -1.49 kcal mol^-1 . Halogen bond induced an opposite helicity compared to the fluorinated species, accompanied by the inversed circularly polarized luminescence.

Are bis(pyridine)iodine(I) complexes applicable for asymmetric halogenation?

Enantiopure halogenated molecules are of tremendous importance as synthetic intermediates in the construction of pharmaceuticals, fragrances, flavours, natural products, pesticides, and functional materials. Enantioselective halofunctionalizations remain poorly understood and generally applicable procedures are lacking. The applicability of chiral trans-chelating bis(pyridine)iodine(i) complexes in the development of substrate independent, catalytic enantioselective halofunctionalization has been explored herein. Six novel chiral bidentate pyridine donor ligands have been designed, routes for their synthesis developed and their [N–I–N]⁺-type halogen bond complexes studied by ¹⁵N NMR and DFT. The chiral complexes encompassing a halogen bond stabilized iodenium ion are shown to be capable of efficient iodenium transfer to alkenes; however, without enantioselectivity. The lack of stereoselectivity is shown to originate from the availability of multiple ligand conformations of comparable energies and an insufficient steric influence by the chiral ligand. Substrate preorganization by the chiral catalyst appears a necessity for enantioselective halofunctionalization.

The enantioselectivity of the iodine(i) transfer process from chiral bis(pyridine)iodine(i) complexes to alkenes is explored.

Revisiting the covalent nature of halogen bonding: a polarized three-center four-electron bond

As an important intermolecular interaction, halogen bonding has been studied extensively, but its nature still suffers from controversy without one uniform essence. Electrostatics, charge transfer, polarization and dispersion are emphasized, but the covalent nature is usually overlooked except for the strong halogen bonding species I₃⁻, which is widely accepted as a result of a three-center four-electron (3c-4e) interaction. In our study, the potential energy surface of I₃⁻ has been evaluated to explore the dissociation from I₃⁻ to I₂⋯I⁻. We found that different from an equivalent 3c-4e bond in I₃⁻, I₂⋯I⁻ can be rationalized by a polarized one. In addition, when the orbitals are polarized, it is exactly what traditional charge transfer or the popular σ-hole picture describes. I₃⁻ can be described by the Lewis theory model with the middle I⁺ cation serving as the Lewis acid and two terminal I⁻ anions acting as Lewis base. Therefore, we further extended this model to a series of I-containing species with chemical composition of L–I⁺–L, F⁻–I⁺–L and H₃P–I⁺–L (L = OH⁻, F⁻, Cl⁻, Br⁻, I⁻, PH₃, NH₃, H₂S, HI, H₂O, HBr and HCl) to explore the nature of halogen bonding. When the forces of two bases around I⁺ are the same, it corresponds to an equivalent 3c-4e bond, such as I₃⁻. Otherwise, it is a polarized multicenter bond, such as I₂⋯I⁻. This work gives a new insight into the nature of halogen bonding compounds: besides the well-known I₃⁻, the nature of the other species is also a multicenter bond, existing as equivalent and polarized 3c-4e bonds, respectively.

The halogen bond could be described with a polarized 3c-4e bond.

The Influence of Secondary Interactions on the [N-I-N]+ Halogen Bond

[Bis(pyridine)iodine(I)]⁺ complexes offer controlled access to halonium ions under mild conditions. The reactivity of such stabilized halonium ions is primarily determined by their three-center, four-electron [N-I-N]⁺ halogen bond. We studied the importance of chelation, strain, steric hindrance and electrostatic interaction for the structure and reactivity of halogen bonded halonium ions by acquiring their ¹⁵ N NMR coordination shifts and measuring their iodenium release rates, and interpreted the data with the support of DFT computations. A bidentate ligand stabilizes the [N-I-N]⁺ halogen bond, decreasing the halenium transfer rate. Strain weakens the bond and accordingly increases the release rate. Remote modifications in the backbone do not influence the stability as long as the effect is entirely steric. Incorporating an electron-rich moiety close by the [N-I-N]⁺ motif increases the iodenium release rate. The analysis of the iodine(I) transfer mechanism highlights the impact of secondary interactions, and may provide a handle on the induction of stereoselectivity in electrophilic halogenations.

Iodonium complexes of the tertiary amines quinuclidine and 1-ethylpiperidine

Iodonium complexes incorporating tertiary amines have been synthesised to study and explore why such species comprised of alkyl amines are relatively rare. The complexes were characterised in solution (1H and 15N NMR spectroscopy) and the solid state (SCXRD), and analysed computationally.

Comment on "The Nature of Chalcogen-Bonding-Type Tellurium-Nitrogen Interactions": Fixing the Description of Finite-Temperature Effects Restores the Agreement Between Experiment and Theory

Mitzel and co-workers recently presented an intriguing molecule displaying a tellurium-nitrogen interaction. Structural data obtained in the solid and in gas phase indicated a large increase of the Te-N equilibrium distance re from 2.64 to 2.92 Å, respectively. Although some DFT calculations appear to support the large re in gas phase, we argue that the lions share of the increase is due to an incomplete description of finite-temperature effects in the back-corrected experimental data. This hypothesis is based on high-level coupled-cluster (CC) and periodic DFT calculations, which consistently point towards a much smaller re in the isolated molecule. Further support comes through MD simulations with a tuned GFN2-xTB Hamiltonian: Calibrated against a CC reference, these show a six-times larger influence of temperature than with the originally used GFN1-xTB. Taking this into account, the back-corrected re in gas phase becomes 2.67±0.08 Å, in good agreement with high-level CC theory and most DFT methods.

Arylethynyl Helices Supported by π-Stacking and Halogen Bonding

Co-crystallization of a pyridyl-containing arylethynyl (AE) moiety with 1,4-diiodotetrafluorobenzene leads to unique, figure-eight shaped helical motifs within the crystal lattice. A slight twist in the AE backbone allows each AE unit to simultaneously interact with haloarene units that are stacked on top of one another. Left-handed (M) and right-handed (P) helices are interspersed in a regular pattern throughout the crystal. The major driving forces for assembly are 1) halogen bonding between the pyridyl nitrogen atoms and the iodine substituents of the haloarene, with N⋅⋅⋅I distances between 2.81 and 2.84 Å, and 2) π-π stacking of the haloarenes, with distances of approximately 3.57 Å between centroids. Halogen bonding and π-π stacking not only work in concert, but also seem to mutually enhance one another. Calculations suggest that the presence of π-π stacking modestly intensifies the halogen bonding interaction by <0.2 kcal/mol; likewise, halogen bonding to the haloarene enhances the π-π stacking interaction by 0.59 kcal/mol.

Short X···N Halogen Bonds With Hexamethylenetetraamine as the Acceptor

Hexamethylenetetramine (HMTA) and N-haloimides form two types of short (imide)X···N and X–X···N (X = Br, I) halogen bonds. Nucleophilic substitution or ligand-exchange reaction on the peripheral X of X–X···N with the chloride of N-chlorosuccinimide lead to Cl–X···N halogen-bonded complexes. The 1:1 complexation of HMTA and ICl manifests the shortest I···N halogen bond [2.272(5) Å] yet reported for an HMTA acceptor. Two halogen-bonded organic frameworks are prepared using 1:4 molar ratio of HMTA and N-bromosuccinimide, each with a distinct channel shape, one possessing oval and the other square grid. The variations in channel shapes are due to tridentate and tetradentate (imide)Br···N coordination modes of HMTA. Density Functional Theory (DFT) studies are performed to gain insights into (imide)X···N interaction strengths (ΔEint). The calculated ΔEint values for (imide)Br···N (−11.2 to −12.5 kcal/mol) are smaller than the values for (imide)I···N (−8.4 to −29.0 kcal/mol). The DFT additivity analysis of (imide)Br···N motifs demonstrates Br···N interaction strength gradually decreasing from 1:1 to 1:3 HMTA:N-bromosuccinimide complexes. Exceptionally similar charge density values ρ(r) for N–I covalent bond and I···N non-covalent bond of a (saccharin)N–I···N motif signify the covalent character for I···N halogen bonding.

Quantification of Noncovalent Interactions in Azide-Pnictogen, -Chalcogen, and -Halogen Contacts

The noncovalent interactions between azides and oxygen‐containing moieties are investigated through a computational study based on experimental findings. The targeted synthesis of organic compounds with close intramolecular azide–oxygen contacts yielded six new representatives, for which X‐ray structures were determined. Two of those compounds were investigated with respect to their potential conformations in the gas phase and a possible significantly shorter azide–oxygen contact. Furthermore, a set of 44 high‐quality, gas‐phase computational model systems with intermolecular azide–pnictogen (N, P, As, Sb), –chalcogen (O, S, Se, Te), and –halogen (F, Cl, Br, I) contacts are compiled and investigated through semiempirical quantum mechanical methods, density functional approximations, and wave function theory. A local energy decomposition (LED) analysis is applied to study the nature of the noncovalent interaction. The special role of electrostatic and London dispersion interactions is discussed in detail. London dispersion is identified as a dominant factor of the azide–donor interaction with mean London dispersion energy‐interaction energy ratios of 1.3. Electrostatic contributions enhance the azide–donor coordination motif. The association energies range from −1.00 to −5.5 kcal mol⁻¹.

Short X···N Halogen Bonds With Hexamethylenetetraamine as the Acceptor

Hexamethylenetetramine (HMTA) and N-haloimides form two types of short (imide)X···N and X-X···N (X = Br, I) halogen bonds. Nucleophilic substitution or ligand-exchange reaction on the peripheral X of X-X···N with the chloride of N-chlorosuccinimide lead to Cl-X···N halogen-bonded complexes. The 1:1 complexation of HMTA and ICl manifests the shortest I···N halogen bond [2.272(5) Å] yet reported for an HMTA acceptor. Two halogen-bonded organic frameworks are prepared using 1:4 molar ratio of HMTA and N-bromosuccinimide, each with a distinct channel shape, one possessing oval and the other square grid. The variations in channel shapes are due to tridentate and tetradentate (imide)Br···N coordination modes of HMTA. Density Functional Theory (DFT) studies are performed to gain insights into (imide)X···N interaction strengths (ΔE_int). The calculated ΔE_int values for (imide)Br···N (-11.2 to -12.5 kcal/mol) are smaller than the values for (imide)I···N (-8.4 to -29.0 kcal/mol). The DFT additivity analysis of (imide)Br···N motifs demonstrates Br···N interaction strength gradually decreasing from 1:1 to 1:3 HMTA:N-bromosuccinimide complexes. Exceptionally similar charge density values ρ(r) for N-I covalent bond and I···N non-covalent bond of a (saccharin)N-I···N motif signify the covalent character for I···N halogen bonding.

Halogen Bond of Halonium Ions: Benchmarking DFT Methods for the Description of NMR Chemical Shifts

Because of their anisotropic electron distribution and electron deficiency, halonium ions are unusually strong halogen-bond donors that form strong and directional three-center, four-electron halogen bonds. These halogen bonds have received considerable attention owing to their applicability in supramolecular and synthetic chemistry and have been intensely studied using spectroscopic and crystallographic techniques over the past decade. Their computational treatment faces different challenges to those of conventional weak and neutral halogen bonds. Literature studies have used a variety of wave functions and DFT functionals for prediction of their geometries and NMR chemical shifts, however, without any systematic evaluation of the accuracy of these methods being available. In order to provide guidance for future studies, we present the assessment of the accuracy of 12 common DFT functionals along with the Hartree-Fock (HF) and the second-order Møller-Plesset perturbation theory (MP2) methods, selected from an initial set of 36 prescreened functionals, for the prediction of 1H, 13C, and 15N NMR chemical shifts of [N-X-N]+ halogen-bond complexes, where X = F, Cl, Br, and I. Using a benchmark set of 14 complexes, providing 170 high-quality experimental chemical shifts, we show that the choice of the DFT functional is more important than that of the basis set. The M06 functional in combination with the aug-cc-pVTZ basis set is demonstrated to provide the overall most accurate NMR chemical shifts, whereas LC-ωPBE, ωB97X-D, LC-TPSS, CAM-B3LYP, and B3LYP to show acceptable performance. Our results are expected to provide a guideline to facilitate future developments and applications of the [N-X-N]+ halogen bond.

O-I-O halogen bond of halonium ions

The reactivity of halonium ions is conveniently modulated by three-center, four-electron halogen bonds. Such stabilized halonium complexes are valuable reagents for oxidations and halofunctionalization reactions. We report the first example of the stabilization of a halenium ion in a three-center, four-electron halogen bond with two oxygen ligands. The influence of electron density and solvent on the stability of the complexes is assessed. O-I-O halogen bond complexes are applicable as synthetic reagents and as supramolecular synthons.

Two Orthogonal Halogen-Bonding Interactions Directed 2D Crystalline Supramolecular J-Dimer Lamellae

Dye assemblies exhibit fascinating properties and performances, both of which depend critically on the mutual packing arrangement of dyes and on the supramolecular architecture. Herein, we engineered, for the first time, an intriguing chlorosome-mimetic 2D crystalline J-dimer lamellar structure based on halogenated dyes in aqueous media by employing two distinct orthogonal halogen-bonding (XB) interactions. As the only building motif, antiparallel J-dimer was formed and stabilized by single π-stacking and dual halogen⋅⋅⋅π interactions. With two substituted halogen atoms acting as XB donors and the other two acting as acceptors, the constituent J-dimer units were linked by quadruple highly-directional halogen⋅⋅⋅halogen interactions in a staggered manner, resulting in unique 2D lamellar dye assemblies. This work champions and advances halogen-bonding as a remarkably potent tool for engineering dye aggregates with a controlled molecular packing arrangement and supramolecular architecture.

Catalytic Activity of trans-Bis(pyridine)gold Complexes

Gold catalysis has become one of the fastest growing fields in chemistry, providing new organic transformations and offering excellent chemoselectivities under mild reaction conditions. Methodological developments have been driven by wide applicability in the synthesis of complex structures, whereas the mechanistic understanding of Au(III)-mediated processes remains scanty and have become the Achilles’ heel of methodology development. Herein, the systematic investigation of the reactivity of bis(pyridine)-ligated Au(III) complexes is presented, based on NMR spectroscopic, X-ray crystallographic, and DFT data. The electron density of pyridines modulates the catalytic activity of Au(III) complexes in propargyl ester cyclopropanation of styrene. To avoid strain induced by a ligand with a nonoptimal nitrogen–nitrogen distance, bidentate bis(pyridine)–Au(III) complexes convert into dimers. For the first time, bis(pyridine)Au(I) complexes are shown to be catalytically active, with their reactivity being modulated by strain.

Asymmetric [N–I–N]+ halonium complexes

The first examples of unrestrained asymmetric silver(i) and halonium complexes have been prepared and characterised.

Halogen bonds of halonium ions

Halonium ions are particularly strong halogen bond donors, and are accordingly valuable tools for a variety of fields, such as supramolecular and synthetic organic chemistry.

Optically active Ag(i): o-OPE helicates using a single homochiral sulfoxide as chiral inducer

In this work we describe the ability of a simple enantiopure sulfoxide group to promote folding of oligo ortho-phenylene ethynylenes (o-OPEs) with one helical sense. A family of foldamers with up to seven triple bonds was synthesized and fully characterized. Moreover, changes in structure and chiroptical properties caused by Ag(i) coordination have been studied by NMR, UV, VCD and ECD measurements. Quantum mechanical DFT calculations support experimental results.

Fluorinated azobenzenes as supramolecular halogen-bonding building blocks

ortho-Fluoroazobenzenes are a remarkable example of bistable photoswitches, addressable by visible light. Symmetrical, highly fluorinated azobenzenes bearing an iodine substituent in para-position were shown to be suitable supramolecular building blocks both in solution and in the solid state in combination with neutral halogen bonding acceptors, such as lutidines. Therefore, we investigate the photochemistry of a series of azobenzene photoswitches. Upon introduction of iodoethynyl groups, the halogen bonding donor properties are significantly strengthened in solution. However, the bathochromic shift of the π→π* band leads to a partial overlap with the n→π* band, making it slightly more difficult to address. The introduction of iodine substituents is furthermore accompanied with a diminishing thermal half-life. A series of three azobenzenes with different halogen bonding donor properties are discussed in relation to their changing photophysical properties, rationalized by DFT calculations.

Effects of Halogen, Chalcogen, Pnicogen, and Tetrel Bonds on IR and NMR Spectra

Complexes were formed pairing FX, FHY, FH2Z, and FH3T (X = Cl, Br, I; Y = S, Se, Te; Z = P, As, Sb; T = Si, Ge, Sn) with NH3 in order to form an A⋯N noncovalent bond, where A refers to the central atom. Geometries, energetics, atomic charges, and spectroscopic characteristics of these complexes were evaluated via DFT calculations. In all cases, the A-F bond, which is located opposite the base and is responsible for the σ-hole on the A atom, elongates and its stretching frequency undergoes a shift to the red. This shift varies from 42 to 175 cm-1 and is largest for the halogen bonds, followed by chalcogen, tetrel, and then pnicogen. The shift also decreases as the central A atom is enlarged. The NMR chemical shielding of the A atom is increased while that of the F and electron donor N atom are lowered. Unlike the IR frequency shifts, it is the third-row A atoms that undergo the largest change in NMR shielding. The change in shielding of A is highly variable, ranging from negligible for FSnH3 all the way up to 1675 ppm for FBr, while those of the F atom lie in the 55-422 ppm range. Although smaller in magnitude, the changes in the N shielding are still easily detectable, between 7 and 27 ppm.