Modular Synthesis of Improbable Rotaxanes with All-Benzene Scaffolds

"Improbable" rotaxanes consisting of interlocked conjugated components represent non-trivial synthetic targets, not to mention those with all-benzene scaffolds. Herein, a modular synthetic strategy has been established using an isolable azo-linked pre-rotaxane as the core module, in which the azo group functions as a tracelessly removable template to direct mechanical bond formations. Through versatile connections of the pre-rotaxane and other customizable modules, [2]- and [3]rotaxanes derived from all-benzene scaffolds have been accomplished, demonstrating the utility and potential of the synthetic design for all-benzene interlocked supramolecules.

Photoresponsive Viscoelasticity of the Granular Materials of Azobenzene-Bearing Molecular Nanoparticles

The large sizes of granular particles lead to their slow diffusive dynamics and significant interparticle friction, bringing enormous difficulty to tune the mechanical properties and processability of the granular materials (GMs). Herein, 1 nm polyhedral oligomeric silsesquioxane (POSS) particles functionalized with azobenzene are designed as structural units, and the obtained GMs show unique photoswitchable viscoelasticity. The azobenzene group can undergo a reversible trans-cis conformation switch while the π-π stacking among the azobenzene fragments is only favored by the trans-conformation due to molecular geometrical requirements. The POSS units from neighboring assemblies close pack to form microdomains, and the POSS is under confinement by both the supramolecular bonding and the other POSS in the microdomains. The simultaneous breaking of the two types of confinement is difficult and, therefore, the free diffusion of POSS is hindered, leading to the elasticity of the GMs of trans-POSS. For cis-POSS, the interparticle supramolecular interaction is weak and the POSS unit can undergo free diffusion, contributing to their high flowability at room temperature. The photoswitching viscoelasticity of GMs is further used for self-healing and photoswitchable adhesion. This work paves new pathways for the regulation of material viscoelasticity and the design of GM-based smart materials.

Photochemically Induced Propulsion of a 4D Printed Liquid Crystal Elastomer Biomimetic Swimmer

Underwater organisms exhibit sophisticated propulsion mechanisms, enabling them to navigate fluid environments with exceptional dexterity. Recently, substantial efforts have focused on integrating these movements into soft robots using smart shape-changing materials, particularly by using light for their propulsion and control. Nonetheless, challenges persist, including slow response times and the need of powerful light beams to actuate the robot. This last can result in unintended sample heating and potentially necessitate tracking specific actuation spots on the swimmer. To tackle these challenges, new azobenzene-containing photopolymerizable inks are introduced, which can be processed by extrusion printing into liquid crystalline elastomer (LCE) elements of precise shape and morphology. These LCEs exhibit rapid and significant photomechanical response underwater, driven by moderate-intensity ultraviolet (UV) and green light, being the actuation mechanism predominantly photochemical. Inspired by nature, a biomimetic four-lapped ephyra-like LCE swimmer is printed. The periodically illumination of the entire swimmer with moderate-intensity UV and green light, induces synchronous lappet bending toward the light source and swimmer propulsion away from the light. The platform eliminates the need of localized laser beams and tracking systems to monitor the swimmer's motion through the fluid, making it a versatile tool for creating light-fueled robotic LCE free-swimmers.

Effects of Operating Mechanical Conditions and Polymer Networks of Nematic Elastomers on Photo-Induced Mechanical Performances

Photoresponsive liquid-crystalline elastomers (LCEs) are promising candidates for light-controlled soft actuators. Photoinduced stress/strain originates from the changes in mechanical properties after light irradiation. However, the correlation between the photoinduced mechanical performance and in-use conditions such as stress/strain states and polymer network properties (such as effective crosslink density and dangling chain density) remains unexplored for practical applications. Here, isometric photo-induced stress or isotonic strain is investigated at different operating strains or stresses, respectively, on LCEs with polymer network variations, produced by different amounts of solvent during polymerization. As the solvent volume increases, the moduli and photoinduced stresses decrease. However, the photo-induced strain, fracture strain, fracture stress, and viscosity increase. The optical response performance initially increases with the operating strain/stress, peaks at a higher actuation strain/stress, and then, decreases depending on the polymer network. The maximum work densities, which also depend on the operating stress, are in the range of ≈200-300 kJm-3. These findings, highlighting the significant variations in the mechanical performance with the operating stress/strain ranges and amount of solvent used in the synthesis, are critical for designing LCE-based mechanical devices.

Structure-property relationship in functionalized azobenzene photoswitches and their supramolecular behavior

Herein, we report the design, synthesis, and supramolecular behavior of 30 structurally diverse photoresponsive azobenzene molecular systems. To establish structure-property relationships, azobenzenes appended with N-picolinyl and/or N-benzyl groups tethered directly through carboxamides or via triazolylmethyl carboxamide linkages were explored. We have evaluated the photoswitching characteristics and thermal stability of the Z isomers through systematic studies. All the targets were also screened for their aggregation behavior and supramolecular aspects. Among all the derivatives, a few carboxamide-based systems formed microcrystals upon aggregation, showing light responsiveness. In contrast, the derivatives tethered via triazolylmethyl carboxamide linkage exhibited hydrogel formation with excellent water-absorbing capacity. All supramolecular aspects of the morphology of the microcrystal and hydrogel states and their stimuli-responsiveness have been studied using spectroscopy and various microscopic techniques.

Photomechaelectric Nanogenerators with Different Photoisomers and Dipole Units for Harvesting UV Light Energy

To date, transforming environmental energy into electricity through a non-mechanical way is challenging. Herein, a series of photomechaelectric (PME) polyurethanes containing azobenzene-based photoisomer units and ionic liquid-based dipole units are synthesized, and corresponding PME nanogenerators (PME-NGs) to harvest electricity are fabricated. The dependence of the output performance of PME-NGs on the structure of the polyurethane is evaluated. The results show that the UV light energy can directly transduce into alternating-current (AC) electricity by PME-NGs via a non-mechanical way. The optimal open-circuit voltage and short-circuit current of PME-NGs under UV illumination reach 17.4 V and 696 µA, respectively. After rectification, the AC electricity can be further transformed into direct-current (DC) electricity and stored in a capacitor to serve as a power system to actuate typical microelectronics. The output performance of PME-NGs is closely related to the hard segment content of the PME polyurethane and the radius of counter anions in the dipole units. Kelvin probe force microscopy is used to confirm the existence of the PME effect and the detailed mechanism about the generation of AC electricity in PME-NGs is proposed, referring to the back and forth drift of induced electrons on the two electrodes in contact with the PME polyurethanes.

A Photoswitchable Metallocycle Based on Azobenzene: Synthesis, Characterization, and Ultrafast Dynamics

The novel photoswitchable ligand 3,3'-Azobenz(metPA)2 (1) is used to prepare a [Cu2(1)2](BF4)2 metallocycle (2), whose photoisomerization was characterized using static and time-resolved spectroscopic methods. Optical studies demonstrate the highly quantitative and reproducible photoinduced cyclic E/Z switching without decay of the complex. Accordingly and best to our knowledge, [Cu2(1)2](BF4)2 constitutes the first reversibly photoswitchable (3d)-metallocycle based on azobenzene. The photoinduced multiexponential dynamics in the sub-picosecond to few picosecond time domain of 1 and 2 have been assessed. These ultrafast dynamics as well as the yield of the respective photostationary state (PSSZ = 65 %) resemble the behavior of archetypical azobenzene. Also, the innovative pump-probe laser technique of gas phase transient photodissociation (τ-PD) in a mass spectrometric ion trap was used to determine the intrinsic relaxation dynamics for the isolated complex. These results are consistent with the results from femtosecond UV/Vis transient absorption (fs-TA) in solution, emphasizing the azobenzene-like dynamics of 2. This unique combination of fs-TA and τ-PD enables valuable insights into the prevailing interplay of dynamics and solvation. Both analyses (in solution and gas phase) and quantum chemical calculations reveal a negligible effect of the metal coordination on the switching mechanism and electronic pathway, which suggests a non-cooperative isomerization process.

Azobenzene-Based Conjugated Polymers: Synthesis, Properties, and Biological Applications

Conjugated polymers (CPs) have been developed quickly as an emerging functional material with applications in optical and electronic devices, owing to their highly electron-delocalized backbones and versatile side groups for facile processibility, high mechanical strength, and environmental stability. CPs exhibit multistimuli responsive behavior and fluorescence quenching properties by incorporating azobenzene functionality into their molecular structures. Over the past few decades, significant progress has been made in developing functional azobenzene-based conjugated polymers (azo-CPs), utilizing diverse molecular design strategies and synthetic pathways. This article comprehensively reviews the rapidly evolving research field of azo-CPs, focusing on the structural characteristics and synthesis methods of general azo-CPs, as well as the applications of charged azo-CPs, specifically azobenzene-based conjugated polyelectrolytes (azo-CPEs). Based on their molecular structures, azo-CPs can be broadly categorized into three primary types: linear CPs with azobenzene incorporated into the side chain, linear CPs with azobenzene integrated into the main chain, and branched CPs containing azobenzene moieties. These systems are promising for biomedical applications in biosensing, bioimaging, targeted protein degradation, and cellular apoptosis.

Two-Color Spatially Resolved Tuning of Polymer-Coated Metasurfaces

For the realization of truly reconfigurable metasurface technologies, dynamic spatial tuning of the metasurface resonance is required. Here we report the use of organic photoswitches as a means for the light-induced spatial tuning of metasurface resonances. Coating of a dielectric metasurface, hosting high-quality-factor resonances, with a spiropyran (SPA)-containing polymer enabled dynamic resonance tuning up to 4 times the resonance full-width at half-maximum with arbitrary spatial precision. A major benefit of employing photoswitches is the broad toolbox of chromophores available and the unique optical properties of each. In particular, SPA and azobenzene (AZO) photoswitches can both be switched with UV light but exhibit opposite refractive index changes. When applied to the metasurface, SPA induced a red shift in the metasurface resonance with a figure of merit of 97 RIU-1, while AZO caused a blue shift in the resonance with an even greater sensitivity of 100 RIU-1. Critically, SPA and AZO can be individually recovered with red and blue light, respectively. To exploit this advantage, we coated a dielectric metasurface with spatially offset SPA- and AZO-containing polymers to demonstrate wavelength-dependent, spatially resolved control over the metasurface resonance tuning.

A Synthetic Approach for Oxadiazole-Decorated Azobenzene Photoswitches

This work reports the design and synthesis of novel oxadiazole-decorated azobenzenes, structural analysis of the resulting compounds and behavior under light irradiation. The synthetic strategy involved constructing amino functionalized heterocyclic key intermediates which were used either to yield electrophilic diazonium salts able to react with phenol moieties or as nucleophilic partners in Bayer-Mills reaction with nitroso-substituted derivatives. The amino-derived oxadiazole intermediates were investigated by absorption and emission spectroscopy providing blue and green emitted light. The target oxadiazole-decorated azobenzenes were structurally characterized, including solid-state structures, and subsequently used in irradiation experiments in order to take advantage of the azo group known to provide photoswitching abilities. We noticed quenching of the emissive properties in presence of the azo group; however, all compounds were very stable to repeated cycles of light irradiation. In addition, according to structural diversification we could obtain half-lives of the meta stable isomers within hours to hundreds of hours range. The experimental results were very well correlated with DFT calculations.

Cyclic Azobenzene-BODIPY Hybrids

Cyclic azobenzene-BODIPY hybrids were synthesized via cyclization by 1) acid-catalysed condensation of azobenzene-bridged dipyrroles with 3,5-di-tert-butylbenzaldehyde, 2) oxidation with DDQ, and 3) metalation with BF3  ⋅ Et2 O. The structures of many cyclic hybrids have been confirmed by single crystal X-ray analysis. The absorption spectra of the hybrids reveal the effective cyclic conjugation. The ultrafast measurements reveal that the photoexcited decays of these cyclic hybrids depend upon the ring size and connectivity.

Light-Responsive Actuator of Azobenzene-Containing Main-Chain Liquid Crystal Elastomers with Allyl Sulfide Dynamic Exchangeable Linkages

Herein, a light-responsive and light-induced bond-exchange-reaction (BER)-capable actuator of the monodomain liquid crystal elastomer (xMLCEazo), developed using main-chain mesogenic oligomers containing azobenzene and allyl sulfide linkages, is investigated. Large quantities of the azobenzene and allyl dithiol linkages are incorporated into the main-chain mesogenic oligomer prepared via thiol-acrylate Michael addition polymerization (TAMAP). The xMLCEazo film is generated via visible-light-induced BER of the drawn polydomain xLCEazo (xPLCEazo) film prepared via TAMAP of tetrathiol cross-linkers and diacrylate-terminated mesogenic oligomers. The xMLCEazo film exhibits large length actuation (38%) through the photothermal effect, along with excellent self-healing and reprogramming properties, under ultraviolet (UV) light irradiation. UV light induced BER of the xMLCEazo film is used to develop complex-shaped actuators with a bilayer film, containing the xMLCEazo and xPLCEazo films, which are bonded by the UV light induced BER without glue. The individual arm of the complex eight-arm flower is remotely actuated under UV light irradiation, and a circular band is rolled under blue laser light irradiation, demonstrating the local remote-controlled actuation and fuel-free motion of the motile soft robot using light irradiation, respectively. Thus, the xMLCEazo film can be expanded to other interesting applications requiring reprogrammable, self-healing, reprocessable, patternable, and remote-controlled light-triggered elastic, rubber-like actuators.

Guard Cell-Inspired Ion Channels: Harnessing the Photomechanical Effect via Supramolecular Assembly of Cross-Linked Azobenzene/Polymers

Stimuli-responsive ion nanochannels have attracted considerable attention in various fields because of their remote controllability of ionic transportation. For photoresponsive ion nanochannels, however, achieving precise regulation of ion conductivity is still challenging, primarily due to the difficulty of programmable structural changes in confined environments. Moreover, the relationship between noncontact photo-stimulation in nanoscale and light-induced ion conductivity has not been well understood. In this work, a versatile design for fabricating guard cell-inspired photoswitchable ion channels is presented by infiltrating azobenzene-cross-linked polymer (AAZO-PDAC) into nanoporous anodic aluminum oxide (AAO) membranes. The azobenzene-cross-linked polymer is formed by azobenzene chromophore (AAZO)-cross-linked poly(diallyldimethylammonium chloride) (PDAC) with electrostatic interactions. Under UV irradiation, the trans-AAZO isomerizes to the cis-AAZO, causing the volume compression of the polymer network, whereas, in darkness, the cis-AAZO reverts to the trans-AAZO, leading to the recovery of the structure. Consequently, the resultant nanopore sizes can be manipulated by the photomechanical effect of the AAZO-PDAC polymers. By adding ionic liquids, the ion conductivity of the light-driven ion nanochannels can be controlled with good repeatability and fast responses (within seconds) in multiple cycles. The ion channels have promising potential in the applications of biomimetic materials, sensors, and biomedical sciences.

Visualization of the Dynamics of Photoinduced Crawling Motion of 4-(Methylamino)Azobenzene Crystals via Diffracted X-ray Tracking

The photoinduced crawling motion of crystals is a continuous motion that azobenzene molecular crystals exhibit under light irradiation. Such motion enables object manipulation at the microscale with a simple setup of fixed LED light sources. Transportation of nano-/micromaterials using photoinduced crawling motion has recently been reported. However, the details of the motion mechanism have not been revealed so far. Herein, we report visualization of the dynamics of fine particles in 4-(methylamino)azobenzene (4-MAAB) crystals under light irradiation via diffracted X-ray tracking (DXT). Continuously repeated melting and recrystallization of 4-MAAB crystals under light irradiation results in the flow of liquid 4-MAAB. Zinc oxide (ZnO) particles were introduced inside the 4-MAAB crystals to detect diffracted X-rays. The ZnO particles rotate with the flow of liquid 4-MAAB. By using white X-rays with a wide energy width, the rotation of each zinc oxide nanoparticle was detected as the movement of a bright spot in the X-ray diffraction pattern. It was clearly shown that the ZnO particles rotated increasingly as the irradiation light intensity increased. Furthermore, we also found anisotropy in the rotational direction of ZnO particles that occurred during the crawling motion of 4-MAAB crystals. It has become clear that the flow perpendicular to the supporting film of 4-MAAB crystals is enhanced inside the crystal during the crawling motion. DXT provides a unique means to elucidate the mechanism of photoinduced crawling motion of crystals.

Light-Induced Nanoscale Deformation in Azobenzene Thin Film Triggers Rapid Intracellular Ca2+ Increase via Mechanosensitive Cation Channels

Epithelial cells are in continuous dynamic biochemical and physical interaction with their extracellular environment. Ultimately, this interplay guides fundamental physiological processes. In these interactions, cells generate fast local and global transients of Ca2+ ions, which act as key intracellular messengers. However, the mechanical triggers initiating these responses have remained unclear. Light-responsive materials offer intriguing possibilities to dynamically modify the physical niche of the cells. Here, a light-sensitive azobenzene-based glassy material that can be micropatterned with visible light to undergo spatiotemporally controlled deformations is used. Real-time monitoring of consequential rapid intracellular Ca2+ signals reveals that the mechanosensitive cation channel Piezo1 has a major role in generating the Ca2+ transients after nanoscale mechanical deformation of the cell culture substrate. Furthermore, the studies indicate that Piezo1 preferably responds to shear deformation at the cell-material interphase rather than to absolute topographical change of the substrate. Finally, the experimentally verified computational model suggests that Na+ entering alongside Ca2+ through the mechanosensitive cation channels modulates the duration of Ca2+ transients, influencing differently the directly stimulated cells and their neighbors. This highlights the complexity of mechanical signaling in multicellular systems. These results give mechanistic understanding on how cells respond to rapid nanoscale material dynamics and deformations.

Multi-responsive Electropolymer Surface Coatings Based on Azo Molecular Switches and Carbazoles: Light, pH, and Electrochemical Control of Z→E Isomerization in Thin Films

Light-responsive surfaces are attracting increasing interest, not least because their physicochemical properties can be selectively and temporally controlled by a non-invasive stimulus. Most existing immobilization strategies involve the chemical attachment of light-responsive moieties to the surface, although this approach often suffers from a low surface concentration of active species or a high inhomogeneity of applied coatings. Herein, electropolymerization of carbazoles as a facile and rapid approach for preparing light-responsive azo-based surface coatings is presented. The electrochemical oxidative polymerization of bis-carbazole containing azo-monomers yields stable films, in which the photochemical properties and specific pH sensitivity of azo molecular switches are retained. Moreover, the molecular design enables electrocatalytic control over Z→E azo double bond isomerization facilitated by the conductive polycarbazole backbone. Ultimately, the high degree of control over macromolecular properties yields conductive surface coatings responsive to a range of stimuli, showing great promise as a strategy for versatile application in organic electronics.

Water-Soluble Azobenzene-Based Solar Thermal Fuels with Improved Long-Term Energy Storage and Energy Density

Azobenzene (azo)-based solar thermal fuels (STFs) have been developed to harvest and store solar energy. However, due to the lipophilicity and low energy density of azo-based STFs, the derived devices demand a large amount of toxic organic solvents for continuous and scalable energy storage. Herein, we report an ionic strategy to prepare water-soluble azo-based STFs (WASTFs) with improved energy storage performance, which can be realized through a facile quaternization reaction using commercial reagents. A family of WASTFs were synthesized, and all of them showed good water solubility, long-term thermal half-life (>30 days), and high energy storage density (a highest energy density of ∼143.6 J g-1 corresponding to an energy storage enthalpy of ∼111.8 kJ mol-1). Compared to the electrically neutral azo-based STFs with similar chemical structures, ΔH and thermal half-life (τ1/2) of the WASTFs are 2.5 times higher and 7.3 times longer, respectively. Cation-π interactions between the quaternized moieties [N+(CHx)4] and benzene moieties of azo were confirmed, which could account for their improvement of the energy storage performance. Macroscale heat release with an average temperature difference of ∼2 °C was achieved for the WASTFs prepared in this work. Generally, a novel family of WASTFs are synthesized and show great applicable prospects in fabricating advanced solar energy storage devices.

Stretching-Induced 2D-to-3D Shape Transformation of an Elastic Composite for Sensitivity-Tailorable Soft Electronics

The shapes of rubbers and elastomers are challenging to alter, and current methods relying on permanent plasticity and dynamic cross-linking strategies are usually laborious and can inevitably compromise the network elasticity. Here, we report a photoresponsive elastic composite that can be programmed into 3D shapes by first UV light irradiation and then stretching. The composite comprises ethylene propylene rubber as the elastic substrate and photoliquefiable azobenzene small molecules as the responsive filler. Upon UV light irradiation, the liquefication of the filler induces the destruction of the crystalline aggregates near the irradiated surface, and after stretching and subsequent stress release, the irradiated part bends to the irradiated side based on a gradient network orientation mechanism. The position and amplitude of bending deformation can be controlled to realize a 2D-to-3D shape transformation. We further show that the resulting 3D-shaped elastomer can integrate with silver conductive paste to develop soft conductive lines with tailorable strain-sensitive conductivities. This study may open a new door for the development of shape-tailorable elastomers and soft electronics with designable strain-sensitive conductivities.

Azobenzene-Containing Liquid Crystalline Twisted Ribbons via Polymerization-Induced Hierarchical Self-Assembly

Polymerization-induced self-assembly incorporating liquid crystallization, as a polymerization-induced hierarchical self-assembly (PIHSA) method to produce polymeric particles with anisotropic morphologies facilely and efficiently, has drawn wide attention recently. However, the means of regulating the morphologies of liquid crystalline (LC) polymer assemblies still need to be explored. Herein, a route is presented to fabricate the twisted ribbons via PIHSA containing azobenzene based on poor reversible addition-fragmentation chain transfer (RAFT) control, called poorly controlled PIHSA. Cyano-4-(dodecylsulfanylthiocarbonyl)sulfanyl pentanoic acid-2-(2-pyridyldithio) ethyl ester is used as the RAFT agent with poor controllability, and the morphological evolution from ribbons to twisted ribbons can be observed in the corresponding PIHSA system. The formation mechanism of the twisted ribbons is studied systematically and the broad molecular weight distribution is considered to be the decisive factor. Moreover, the supramolecular chirality induced by symmetry breaking is also related to the twist of the ribbons. This study enriches the methods of controlling the morphologies of LC polymer particles and is helpful for further clarifying the mechanism of PIHSA.

Photo-Lipids: Light-Sensitive Nano-Switches to Control Membrane Properties

Biological membranes are described as a complex mixture of lipids and proteins organized according to thermodynamic principles. This chemical and spatial complexity can lead to specialized functional membrane domains enriched with specific lipids and proteins. The interaction between lipids and proteins restricts their lateral diffusion and range of motion, thus altering their function. One approach to investigating these membrane properties is to use chemically accessible probes. In particular, photo-lipids, which contain a light-sensitive azobenzene moiety that changes its configuration from trans- to cis- upon light irradiation, have recently gained popularity for modifying membrane properties. These azobenzene-derived lipids serve as nanotools for manipulating lipid membranes in vitro and in vivo. Here, we will discuss the use of these compounds in artificial and biological membranes as well as their application in drug delivery. We will focus mainly on changes in the membrane's physical properties as well as lipid membrane domains in phase-separated liquid-ordered/liquid-disordered bilayers driven by light, and how these changes in membrane physical properties alter transmembrane protein function.

The Synergistic Effects between Liquid Crystal and Crystalline Phase on Photo-Responsive Elastomers toward Quick Photo-Responsive Performance

Adopting only a small amount of azobenzene molecular to design liquid crystal photo-responsive materials capable of quick response and flexible adjustability is in high demand but is challenging. Herein, azobenzenemolecules into polyurethane elastomer containing crystalline structure for preparing azobenzene liquid-crystal elastomers (ALCEs) are demonstrated and this phenomenon of the synergistic effects between liquid crystal and crystalline phase is discovered. The key point of the work is that the synthetic ALCEs can utilize the reversible isomerism capability of azobenzene molecules under light irradiation, which can pry the motion of the macromolecular crystalline region in system to realize the large macroscopic deformation of the photo-responsive behavior. Obviously, the ALCEs sample containing azobenzene molecule and polyethylene glycol crystallization can quickly bend, illuminated by ultraviolet light and rapidly straighten under green light. Under the same ultraviolet irradiation, the bending speed, final bending angle, recovery rate and recovery ratio of ALCEs are larger than that of ALCEs without any crystalline structure. This ALCEs based on the synergistic effects between liquid crystal and crystalline phase can break through the current dilemma that the application of traditional azobenzene photo-responsive materials is limited by their concentration, greatly expanding the design thought and their scope of application.

Recent Progress in Azobenzene-Based Supramolecular Materials and Applications

Azobenzene-containing small molecules and polymers are functional photoswitchable molecules to form supramolecular nanomaterials for various applications. Recently, supramolecular nanomaterials have received enormous attention in material science because of their simple bottom-up synthesis approach, understandable mechanisms and structural features, and batch-to-batch reproducibility. Azobenzene is a light-responsive functional moiety in the molecular design of small molecules and polymers and is used to switch the photophysical properties of supramolecular nanomaterials. Herein, we review the latest literature on supramolecular nano- and micro-materials formed from azobenzene-containing small molecules and polymers through the combinatorial effect of weak molecular interactions. Different classes including complex coacervates, host-guest systems, co-assembled, and self-assembled supramolecular materials, where azobenzene is an essential moiety in small molecules, and photophysical properties are discussed. Afterward, azobenzene-containing polymers-based supramolecular photoresponsive materials formed through the host-guest approach, polymerization-induced self-assembly, and post-polymerization assembly techniques are highlighted. In addition to this, the applications of photoswitchable supramolecular materials in pH sensing, and CO2 capture are presented. In the end, the conclusion and future perspective of azobenzene-based supramolecular materials for molecular assembly design, and applications are given.

Photomobile Polymer-Piezoelectric Composite for Enhanced Actuation and Energy Generation

In this study, we present an innovative approach to increase the quantum yield and wavelength sensitivity of photomobile polymer (PMP) films based on azobenzene by doping the polymer matrix with noble metal nanoparticles. These doped PMP films showed faster and more significant bending under both UV as well as visible and near-infrared light regardless of whether it was coherent, incoherent, polarized, or unpolarized irradiation, expanding the potential of PMP-based actuators. To illustrate their practical implications, we created a proof-of-concept model of power generation by coupling it to flexible piezoelectric materials under simulated sunlight. This model has been tested under real operating conditions, thus demonstrating the possibility of generating electricity with variable light exposure. Additionally, our synthetic protocol is solvent-free, which is another benefit of environmental relevance. Our research lays the groundwork for the development of sunlight-sensitive devices, such as photomechanical actuators and advanced photovoltaic modules, which may break ground in the thriving field of smart materials. We are confident that the presented findings will contribute to the ongoing discourse in the field and inspire additional advances in renewable energy applications.

Real-Time Imaging of Plasmonic Concentric Circular Gratings Fabricated by Lens-Axicon Laser Interference Lithography

Concentric circular gratings are diffractive optical elements useful for polarization-independent applications in photonics and plasmonics. They are usually fabricated using a low-throughput and expensive electron beam lithography technique. In this paper, concentric circular gratings with selectable pitch values were successfully manufactured on thin films of azobenzene molecular glass using a novel laser interference lithography technique utilizing Bessel beams generated by a combined lens-axicon configuration. This innovative approach offers enhanced scalability and a simplified manufacturing process on larger surface areas compared to the previously reported techniques. Furthermore, the plasmonic characteristics of these concentric circular gratings were investigated using conventional spectrometric techniques after transferring the nanostructured patterns from azobenzene to transparent gold/epoxy thin films. In addition, the real-time imaging of surface plasmon resonance colors transmitted from the concentric circular gratings was obtained using a 45-megapixel digital camera. The results demonstrated a strong correlation between the real-time photographic technique and the spectroscopy measurements, validating the efficacy and accuracy of this approach for the colorimetric studying of surface plasmon resonance responses in thin film photonics.

Bridging the Binding Sites 2.0: Photoswitchable Dualsteric Ligands for the Cannabinoid 2 Receptor

The cannabinoid receptor 2 (CB2R) has high, unexploited therapeutic potential in several central nervous system disorders due to its involvement in neuroinflammatory processes and pathologies like neurodegeneration. Dualsteric/bitopic ligands are currently developed to achieve receptor subtype selectivity and biased signaling. To obtain a molecular tool compound with photoswitchable potential dualsteric properties, we applied two different approaches to link a positive allosteric modulator with an orthosteric agonist via a photochromic unit. We characterized the photophysical properties of all compounds and determined efficacy in internalization, calcium mobilization, and BRET studies. We report the first potentially dualsteric photoswitchable ligand for studying molecular mechanisms of CB2R-associated pathologies. Compound 17-para is a submicromolar "cis-on" agonist with >10-fold higher potency compared to its trans photoisomer and allows high spatiotemporal control of CB2R activation.

Site Selectivity of Peptoids as Azobenzene Scaffold for Molecular Solar Thermal Energy Storage

Storing solar energy is a key challenge in modern science. MOlecular Solar Thermal (MOST) systems, in particular those based on azobenzene switches, have received great interest in the last decades. The energy storage properties of azobenzene (t1/2 <4 days; ΔH~270 kJ/kg) must be improved for future applications. Herein, we introduce peptoids as programmable supramolecular scaffolds to improve the energy storage properties of azobenzene-based MOST systems. We demonstrate with 3-unit peptoids bearing a single azobenzene chromophore that dynamics of the MOST systems can be tuned depending on the anchoring position of the photochromic unit on the macromolecular backbone. We measured a remarkable increase of the half-life of the metastable form up to 14 days at 20 °C for a specific anchoring site, significantly higher than the isolated azobenzene moiety, thus opening new perspectives for MOST development. We also highlight that liquid chromatography coupled to mass spectrometry does not only enable to monitor the different stereoisomers during the photoisomerization process as traditionally done, but also allows to determine the thermal back-isomerization kinetics.

Chiroptical switching in the azobenzene-based self-locked [1]rotaxane by solvent and photoirradiation

Because of its dynamic reversible nature and simple regulation properties, rotaxane systems provided a good route for the construction of responsive supramolecular chiral materials. Here, we covalently encapsulate the photo-responsive guest molecule azobenzene (Azo) in a chiral macrocycle β-cyclodextrin (β-CD) to prepare self-locked chiral [1]rotaxane [Azo-CD]. On this basis, the self-adaptive conformation of [Azo-CD] was manipulated by solvent and photoirradiation; meanwhile, dual orthogonal regulation of the [1]rotaxane chiroptical switching could also be realized.

Synthesis of an Ortho-Functionalized Tetrafluorinated Azobenzene Phosphoramidite for Incorporation into a Tetrafluorinated Azobenzene-Containing siRNA for Photocontrolled Gene Silencing

This article presents the detailed synthesis and characterization protocols for an ortho-functionalized tetrafluorinated azobenzene containing siRNA, which has photoswitchable properties. To design this tetrafluorinated azobenzene scaffold, several synthetic steps are performed to generate a symmetrical tetrafluorinated azobenzene diol. This diol is treated with dimethoxytrityl chloride (DMT-Cl) to protect one of the alcohols. Next, the DMT-protected tetrafluorinated monoalcohol is phosphitylated to afford the DMT-phosphoramidite building block used for solid-phase synthesis. This paper also contains the detailed biophysical characterization, biological testing, and photo-switching protocols of an ortho-functionalized fluorinated azobenzene containing siRNA (F-siRNA), which has photoswitchable properties that can be controlled with visible light. First, the F-siRNA was characterized by annealing the sense and antisense strands together and then measuring the circular dichroism (CD) profile and melting temperature (Tm ) of the duplexes. Second, biological testing of the F-siRNA is performed in cell culture to determine their gene silencing efficacy. Finally, their gene-silencing activities are measured after exposure to green light to inactivate the F-siRNA, followed by blue light, which reactivates the F-siRNA. The F-siRNA can be kept inactive for up to 72 hr and reactivated at any time within this 72-hr window. © 2023 Wiley Periodicals LLC.

Boosting Ion Conductivities: Light-Modulated Azobenzene-Based Ionic Liquids in Vertical Nanochannels

Exploring stimuli-responsive ion-conductive materials is a challenging task, but it has gained increasing attention because of their enormous potential applications in actuators, sensors, and smart electronics. Here, we demonstrate a distinctive photoresponsive ion-conductive device that utilizes azobenzene-based ionic liquids ([AzoCnMIM][Br], where n = 2, 6, and 10), confined in nanochannels of anodic aluminum oxide (AAO) templates for photoisomerization. The structure of [AzoCnMIM][Br] comprises photoresponsive and hydrophobic azobenzene moieties, hydrophilic imidazolium cations, and negatively charged bromide ions. Therefore, [AzoCnMIM][Br] can form micelles and exhibit photoresponsive ion conductivities. The nanochannels of AAO templates exhibit a confinement effect on the formation of azobenzene-based ionic liquid micelles due to the pore size, thereby preventing the formation of larger micelles that could lead to a decrease in conductivity. Consequently, the ion conductivities of the azobenzene-based ionic liquids are higher in the nanochannels of the AAO templates. The effects of the length of carbon chains on the azobezene-based ionic liquids and the pore size of the AAO templates have also been investigated. Additionally, through irradiation with UV/vis light, [AzoCnMIM][Br] can undergo reversible isomerization, thereby reversibly changing the sizes of the micelles and subsequently altering the ion conductivities.

Solar Efficiency of Azo-Photoswitches for Energy Conversion: A Comprehensive Assessment

Photoswitches can absorb solar photons and store them as chemical energy by photoisomerization, which is regarded as a promising strategy for photochemical solar energy storage. Although many efforts have been devoted to photoswitch discovery, the solar efficiency, a critical fundamental parameter assessing the solar energy conversion ability, has attracted little attention and remains to be studied comprehensively. Here we provide a systematic evaluation of the solar efficiency of typical azo-switches including azobenzenes and azopyrazoles, and gain a comprehensive understanding on its decisive factors. All the efficiencies are found below 1.0 %, far from the proposed limits for molecular solar thermal energy storage systems. Azopyrazoles exhibit remarkably higher solar efficiencies (0.59-0.94 %) than azobenzenes (0.11-0.43 %), benefiting from largely improved quantum yield and photoisomerization yield. Light filters can be used to improve the isomerization yield but inevitably narrow the usable range of solar spectrum, and these two contradictory effects ultimately reduce solar efficiencies. We envision this conflict could be resolved through developing azo-switches that afford high isomerization yields by absorbing wide-spectrum solar energy. We hope this work could promote more efforts to improve the solar efficiency of photoswitches, which is highly relevant to the prospect for future applications.

Water-Content-Dependent Switching of the Bending Behavior of Photoresponsive Hydrogels Composed of Hydrophilic Acrylamide-Based Main Chains and Hydrophobic Azobenzene

Photoresponsiveness is a promising characteristic of stimulus-responsive materials. Photoresponsiveness can be achieved by incorporating photoresponsive molecules into polymeric materials. In addition, multiple-stimuli-responsive materials have attracted scientists' interest. Among the numerous multiple-stimuli-responsive materials, moisture- and photoresponsive materials are the focus of this report. These stimuli-responsive materials responded to the stimuli synergistically or orthogonally. Unlike most stimulus-responsive materials utilizing moisture and light as stimuli, the materials studied herein switch their photoresponsiveness in the presence of moisture. Appropriate copolymers consisting of hydrophilic acrylamide-based monomers for the main chain and hydrophobic azobenzene moieties switched their bending behaviors at 6-9 wt% water contents. At water contents lower than 6 wt%, the polymeric materials bent away from the light source, while they bent toward the light source at water contents higher than 10 wt%. At a low water content, the bending behaviors can be described on the molecular scale. At a high water content, the bending behavior requires consideration of the phase scale, not only the molecular scale. By controlling the balance between hydrophilicity and hydrophobicity, the switching behavior was achieved. This switching behavior may inspire additional strategies for the application of polymeric material as actuators.

Smart Wearable Patches Using Light-Controlled Activation and Delivery of Photoswitchable Antimicrobial Peptides

A novel strategy to treat Staphylococcus aureus (S. aureus) skin infections is presented, where UV light is used to facilitate concomitant light-controlled activation and delivery of an antimicrobial therapeutic agent. Specifically, a new photoswitchable gramicidin S analogue was immobilized onto a polymeric wearable patch via a photocleavable linker that undergoes photolysis at the same wavelength of light required for activation of the peptide. Unlike toxic gramicidin S, the liberated active photoswitchable peptide exhibits antimicrobial activity against S. aureus while being ostensibly non-haemolytic to red blood cells. Moreover, irradiation with visible light switches off the antimicrobial properties of the peptide within seconds, presenting an ideal strategy to regulate antibiotic activity for localized bacterial infections with the potential to mitigate resistance.

On the Effects of Different trans and cis Populations in Azobenzene Liquid Crystal Elastomers: A Monte Carlo Investigation

We investigate main-chain liquid crystal elastomers (LCEs) formed by photoresponsive azobenzene units with different populations of trans and cis conformers (from fully trans to fully cis). We study their macroscopic properties as well as their molecular organization using extensive Monte Carlo simulations of a simple coarse-grained model where the trans and cis conformers are represented by soft-core biaxial Gay-Berne particles with size and interaction energy parameters obtained by fitting a bare bone azobenzene moiety represented at atomistic level. We find that increasing the fraction of cis conformers, as could be obtained by near-UV irradiation, shifts the nematic-isotropic transition to a lower temperature, consistently with experiment, while generating internal stress in a clamped sample. An analysis of pair distributions shows that the immediate surroundings of a bent cis molecule are slightly less dense and more orientationally disordered in comparison with that of a trans conformer. Comparing nematic and smectic LCEs, actuation in the smectic phase proved less effective, disrupting the smectic layers to some extent but preserving orientational order of the azobenzene moieties.

Photochromic Azobenzene Inverse Opal Film toward Dynamic Anti-Fake Pattern

Azobenzene mesogens have garnered considerable research attention in the realm of photo-responsive materials due to their reversible trans-cis isomerization. In this paper, we demonstrate an azobenzene inverse opal film synthesized via photo-polymerization from a SiO2 opal template. The proposed design exhibits intriguing optical properties, including dynamic fluorescent features, distinct fluorescent enhancement, and an anti-fake micropattern with a switchable structure color. This work holds significant importance for advancing the development of novel optical devices.

Triggering RNA Interference by Photoreduction under Red Light Irradiation

RNA interference (RNAi) using small interfering RNAs (siRNAs) is a powerful tool to target any protein of interest and is becoming more suitable for in vivo applications due to recent developments in RNA delivery systems. To exploit RNAi for cancer treatment, it is desirable to increase its selectivity, e.g., by a prodrug approach to activate the siRNAs upon external triggering, e.g., by using light. Red light is especially well suited for in vivo applications due to its low toxicity and higher tissue penetration. Known molecular (not nanoparticle-based) red-light-activatable siRNA prodrugs rely on singlet oxygen (¹O₂)-mediated chemistry. ¹O₂ is highly cytotoxic. Additionally, one of the side products in the activation of the known siRNA prodrugs is anthraquinone, which is also toxic. We herein report on an improved redlight-activatable siRNA prodrug, which does not require ¹O₂ for its activation. In fact, the 5' terminus of the antisense strand is protected with an electron-rich azobenzene promoiety. It is reduced and cleaved upon red light exposure in the presence of Sn(IV)(pyropheophorbide a)dichloride acting as a catalyst and ascorbate as a bulk reducing agent. We confirmed the prodrug activation upon red light irradiation both in cell-free settings and in human ovarian cancer A2780 cells.

Fully Room Temperature Reprogrammable, Recyclable, and Photomobile Soft Actuators from Physically Cross-Linked Main-Chain Azobenzene Liquid Crystalline Polymers

Fully room temperature three-dimensional (3D) shape-reprogrammable, recyclable, and photomobile azobenzene (azo) polymer actuators hold much promise in many photoactuating applications, but their development is challenging. Herein, we report on the efficient synthesis of a series of main-chain azo liquid crystalline polymers (LCPs) with such performances via Michael addition polymerization. They have both ester groups and two kinds of hydrogen bond-forming groups (i.e., amide and secondary amino groups) and different flexible spacer length in the backbones. Such poly(ester-amide-secondary amine)s (PEAsAs) show low glass transition temperatures (T_g ≤ 18.4 °C), highly ordered smectic liquid crystalline phases, and reversible photoresponsivity. Their uniaxially oriented fibers fabricated via the melt spinning method exhibit good mechanical strength and photoinduced reversible bending/unbending and large stress at room temperature, which are largely influenced by the flexible spacer length of the polymers. Importantly, all these fibers can be easily reprogrammed under strain at 25 °C into stable fiber springs capable of showing a totally different photomobile mode (i.e., unwinding/winding), mainly owing to the presence of low T_g and both dynamic hydrogen bonding and stable crystalline domains (induced by the uniaxial drawing during the fiber formation). They can also be recycled from a solution at 25 °C. This work not only presents the first azo LCPs with 3D shape reprogrammability, recyclability, and photomobility at room temperature, but also provides some important knowledge of their structure-property relationship, which is useful for designing more advanced photodeformable azo polymers.

Polarity Does Not Matter: Molecular Weight Reverses the Photoisomerization-Induced Phase Separation of an Azobenzene-Bearing Polymer

We find the non-canonical photoisomerization-induced phase separation of an azobenzene-bearing polymer. The polymer composed of acrylate-based azobenzene (AzoAA) and N,N-dimethylacrylamide (DMA), namely poly(AzoAA-r-DMA), phase separates under visible light-induced cis-to-trans isomerization at high molecular weight, whereas the phase separation is realized under ultraviolet light-induced trans-to-cis isomerization at low molecular weight. Conventionally, the origin of photoisomerization-induced phase separation is believed to arise from the difference in polarity between the apolar trans and polar cis states; thereby the direction of phase changes, either to separate or dissolute, is uniquely determined by the polarity changes during the isomerization of azobenzene. Contrary to this common perception, the poly(AzoAA-r-DMA) in this study phase separates through both trans and cis isomerization, depending on the molecular weight. The non-canonical phase separation of poly(AzoAA-r-DMA) reported herein suggest that molecular weight plays a significant role in determining the phase behavior of azobenzene-bearing polymers. This study provides a platform for the development of spatial temporally controlled delivery vehicles and microreactors. This article is protected by copyright. All rights reserved.

Recent Progress in Photoresponsive Biomaterials

Photoresponsive biomaterials have garnered increasing attention recently due to their ability to dynamically regulate biological interactions and cellular behaviors in response to light. This review provides an overview of recent advances in the design, synthesis, and applications of photoresponsive biomaterials, including photochromic molecules, photocleavable linkers, and photoreactive polymers. We highlight the various approaches used to control the photoresponsive behavior of these materials, including modulation of light intensity, wavelength, and duration. Additionally, we discuss the applications of photoresponsive biomaterials in various fields, including drug delivery, tissue engineering, biosensing, and optical storage. A selection of significant cutting-edge articles collected in recent years has been discussed based on the structural pattern and light-responsive performance, focusing mainly on the photoactivity of azobenzene, hydrazone, diarylethenes, and spiropyrans, and the design of smart materials as the most targeted and desirable application. Overall, this review highlights the potential of photoresponsive biomaterials to enable spatiotemporal control of biological processes and opens up exciting opportunities for developing advanced biomaterials with enhanced functionality.

Optically Controlled Construction of Three-Dimensional Protein Arrays

Protein crystallization is an important tool for structural biology and nanostructure preparation. Here, we report on kinetic pathway-dependent protein crystals that are controlled by light. Photo-responsive crystallites are obtained by complexing the model proteins with cationic azobenzene dyes. The crystalline state is readily switched to a dispersed phase under ultra-violet light and restored by subsequent visible light illumination. The switching can be reversibly repeated for multiple cycles without noticeable structure deterioration. Importantly, the photo treatment not only significantly increases the crystallinity, but creates crystallites at conditions where no ordered lattices are observed upon directly mixing the components. Further control over the azobenzene isomerization kinetics produces protein single crystals of up to ~50 μm. This approach offers an intriguing method to fabricate metamaterials and study optically controlled crystallization.

The interplay between different stimuli in a 4D printed photo-, thermal-, and water-responsive liquid crystal elastomer actuator

Multi-stimuli responsivity in 3D-printed objects is receiving much attention. However, the simultaneous interplay between different environmental stimuli is largely unexplored. In this work, we demonstrate direct ink writing of an oligomeric ink containing an azobenzene photo-switch with an accessible hydrogen bond allowing triple responsivity to light, heat, and water. The resulting printed liquid crystal elastomer performs multiple actuations, the response depending on the environmental conditions. Films printed on a static substrate forming bilayers can rapidly change shape, bending almost 80 degrees if irradiated in air or undergoing a shrinkage of about 50% of its length when heated. The bilayer film assumes dramatically different shapes in water depending on combined environmental temperature and lighting conditions.

In-situ Monitoring of Photo-controllable Wrinkle Erasure in Azobenzene-based Supramolecular Systems

In this contribution, dynamic photoinduced wrinkle erasure enabled by photomechanical changes in supramolecular polymer-azo complexes were characterized via confocal microscopy. Different photoactive molecules, disperse yellow 7 (DY7) and 4,4'-dihydroxyazobenzene (DHAB), were compared to 4-hydroxy-4'-dimethylaminoazobenzene (OH-azo-DMA). The characteristic erasure times of wrinkles were quickly assessed by using an image processing algorithm. The results confirm that the photoinduced movement on the topmost layer can be successfully transferred to the substrate. Furthermore, the chosen supramolecular strategy allows decoupling the effect of molecular weight of the polymer and photochemistry of the chromophore, allowing quantitative comparison of wrinkling erasure efficiency of different materials and providing a facile way to optimize the system for specific applications.

A Recyclable and Scalable High-Capacity Organic Battery

Redox organic electrode materials (OEMs) have attracted extensive attention for batteries due to the possibility to be designed with high performance. However, the practical application of OEMs requires rigor criteria such as low cost, recyclability, scalability and high performance etc. and hence seems still far away. Here, we demonstrate an OEM for high performance aqueous organic batteries. Quantification of the charge storage confirmed the storage of protons with fast reaction kinetics, thereby enabling the high performance at high mass loading. As a result, the laminated pouch cells delivered Ampere-hour-scale capacity with excellent cycling performance. Benefited from the small molecular nature and the stable both charged and discharged states, the electrodes can be recycled at any states of charge with high yields (more than 90%). This work provides a substantial step in the practical applications of OEMs for the future sustainable batteries.

Synthesis and activity-detection of photoswitchable ligands with fipronil to insect

BACKGROUND

Ionotropic γ-aminobutyric acid (GABA) receptor (GABAR) in an insect is the major inhibitory receptor and is one of the most important targets for insecticides. Due to the high spatiotemporal resolution of GABAR, the photopharmacological ligands acting on it in vertebrates but not insect have been developed.

RESULTS

In this study, two types of photochromic ligands (PCLs) including DTFIPs (DTFIP1 and DTFIP2) and ABFIPs (p-, m-, and o-ABFIP) were synthesized by incorporating photoswitch azobenzene or dithienylethene into fipronil (FIP), which is the antagonist of insect GABAR. Their photomodulation was measured by mosquito larval behavior, and their potential action mechanism was explored by the two-electrode voltage clamp (TEVC) technique in vitro. DTFIP1 and m-ABFIP exhibited the most significant difference of insecticidal activity by about 90- and 5-fold to mosquito larvae between non-irradiated and irradiated formation, respectively, and allowed for optical control of mosquito swimming activity. TEVC assay results indicated that m-ABFIP and DTFIP1 enable optical control over the homomeric LsRDL-type GABAR, which is achieved by regulating the chloride channel of resistance to dieldrin (RDL)-type GABAR by photoisomerization.

CONCLUSION

Our results suggested that PCLs synthesized from fipronil provide an alternative and precise tool for studying insect ionotropic GABARs and GABA-dependent behavior. © 2022 Society of Chemical Industry.

Near-Infrared Emissive Hypervalent Compounds with Germanium(IV)-Fused Azobenzene π-Conjugated Systems

A novel molecular design for showing near-infrared (NIR) emission is still required for satisfying growing demands for NIR-light technology. In this research, hypervalent compounds with germanium (Ge)-fused azobenzene (GAz) scaffolds were discovered that can exhibit NIR emission (λ_PL =690∼721 nm, Φ_PL =0.03∼0.04) despite compact π-conjugated systems. The unique optical properties are derived from the trigonal bipyramidal geometry of the hypervalent compounds constructed by combination of Ge and azobenzene-based tridentate ligands. Experimental and theoretical calculation results disclosed that the germanium-nitrogen (Ge-N) coordination at the equatorial position strongly reduces the energy level of the LUMO (lowest unoccupied molecular orbital), and the three-center four-electron (3 c-4 e) bond in the apical position effectively rises the energy level of the HOMO (highest occupied molecular orbital). It is emphasized that large narrowing of the HOMO-LUMO energy gap is achieved just by forming the hypervalent bond. In addition, the narrow-energy-gap property can be enhanced by extension of π-conjugation. The obtained π-conjugated polymer shows efficient NIR emission both in solution (λ_PL =770 nm and Φ_PL =0.10) and film (λ_PL =807 nm and Φ_PL =0.04). These results suggest that collaboration of a hypervalent bond and a π-conjugated system is a novel and effective strategy for tuning electronic properties even in the NIR region.

Sensor to Electronics Applications of Graphene Oxide through AZO Grafting

Graphene is a two-dimensional (2D) material with a single atomic crystal structure of carbon that has the potential to create next-generation devices for photonic, optoelectronic, thermoelectric, sensing, wearable electronics, etc., owing to its excellent electron mobility, large surface-to-volume ratio, adjustable optics, and high mechanical strength. In contrast, owing to their light-induced conformations, fast response, photochemical stability, and surface-relief structures, azobenzene (AZO) polymers have been used as temperature sensors and photo-switchable molecules and are recognized as excellent candidates for a new generation of light-controllable molecular electronics. They can withstand trans-cis isomerization by conducting light irradiation or heating but have poor photon lifetime and energy density and are prone to agglomeration even at mild doping levels, reducing their optical sensitivity. Graphene derivatives, including graphene oxide (GO) and reduced graphene oxide (RGO), are an excellent platform that, combined with AZO-based polymers, could generate a new type of hybrid structure with interesting properties of ordered molecules. AZO derivatives may modify the energy density, optical responsiveness, and photon storage capacity, potentially preventing aggregation and strengthening the AZO complexes. They are potential candidates for sensors, photocatalysts, photodetectors, photocurrent switching, and other optical applications. This review aimed to provide an overview of the recent progress in graphene-related 2D materials (Gr2MS) and AZO polymer AZO-GO/RGO hybrid structures and their synthesis and applications. The review concludes with remarks based on the findings of this study.

Role of Sterically Bulky Azobenzenes in the Molecular Assembly of Pyrene Derivatives: Rectangular Sheet-like Structures and Their Emission Characteristics

The development of pyrene-based fluorescent assembled systems with desirable emission characteristics by reducing conventional concentration quenching and/or aggregation-induced quenching (ACQ) is highly desirable. In this investigation, we designed a new azobenzene-functionalized pyrene derivative (AzPy) in which sterically bulky azobenzene is linked to pyrene. Absorption and fluorescence spectroscopic results before and after molecular assembly indicate that even in a dilute N,N-dimethylformamide (DMF) solution (~10 μM), AzPy molecules experienced significant concentration quenching, whereas the emission intensities of AzPy DMF-H₂O turbid suspensions containing self-assembled aggregates were slightly enhanced and showed similar values regardless of the concentration. The shape and size of sheet-like structures, from incomplete flakes less than one micrometer in size to well-completed rectangular microstructures, could be adjusted by changing the concentration. Importantly, such sheet-like structures exhibit concentration dependence of their emission wavelength from blue to yellow-orange. Comparison with the precursor (PyOH) demonstrates that the introduction of a sterically twisted azobenzene moiety plays an important role in converting the spatial molecular arrangements from H- to J-type aggregation mode. Thus, AzPy chromophores grow into anisotropic microstructures through inclined J-type aggregation and high crystallinity, which are responsible for their unexpected emission characteristics. Our findings provide useful insight into the rational design of fluorescent assembled systems.

Solvent-Controlled Photoswitching of Azobenzene: An Excited State Shuttle

The light-controlled excited state trans-cis isomerization process is a key to the development of conversion of light energy to mechanical motion at the molecular level. Considerable efforts have been made in tuning the isomerization process with electron donor and acceptor substituents by altering the excited state reaction coordinate. Here, we report a two novel push-pull series of para-diethylamino (DEA) and diphenylamino (DPA) substituted (E)-4'-((4-(diethylamino)phenyl)diazenyl)-N,N-diphenyl-[1,1'-biphenyl]-4-amine (1) and (E)-4'-((4-(diphenylamino)phenyl)diazenyl)-N,N-diphenyl-[1,1'-biphenyl]-4-amine (2). Compounds 1 and 2 undergo both photochemical and photophysical excited state deactivation pathways which can be controlled by varying the solvent polarity. These structural motifs of 1 and 2 would undergo torsional motions upon excitation to exhibit either trans→cis photoisomerization or to form a twisted intramolecular charge transfer state and both the process originates from the same excited state and competes with each other. Thus, alternations in the surrounding environment such as solvent polarity, solution viscosity, and protonation were employed to understand the preferential excited state deactivation pathway and thereby these systems could be employed as a new class of azobenzene-based luminescent photochromic molecules. For instance, in nonpolar solvent, toluene photoisomerization is preferred over TICT, but polar solvent, ethanol preferentially stabilizes the TICT state by virtue of N-C rotation which renders the energy barrier unfavourable for photoisomerization. The photostationary state of 1 in toluene is predominantly the Z isomer, whereas in ethanol E isomer is nearly two-fold higher than the Z isomer. These feature sets up a new approach towards the construction of multinary molecular switches and subsequent development in diverse fields.

The Versatile Photo-Thermal Behaviour of a 2-Hydroxyazobenzene

Photochromic compounds are employed in implementing neuron surrogates. They will boost the development of neuromorphic engineering in wetware. In this work, the photochromic behaviours of (E)-3,4,6-trichloro-2-(p-diazenil)-phenol (t-DZH) and its conjugated phenoxide base (t-DZ) have been investigated experimentally in three different media: (1) pure acetonitrile, (2) in water and acetonitrile mixed in a 1/1 volume ratio, and (3) in an aqueous micellar solution of 3-(N,N-Dimethylmyristylammonio)propanesulfonate (SB3-14). The analysis of the spectral and kinetic features of t-DZH and t-DZ has been supported by quantum-mechanical DFT calculations, the maximum entropy method, and the determination of their colourability (C). The versatility of t-DZH and t-DZ makes them promising molecular probes of micro-environments and potential ingredients of photochemical oscillators required for implementing pacemaker neurons capable of communicating through optical signals in wetware.

Optical Manipulation of Gb3 Enriched Lipid Domains: Impact of Isomerization on Gb3 -Shiga Toxin B Interaction

The plasma membrane is a complex assembly of proteins and lipids that can self-assemble in submicroscopic domains commonly termed "lipid rafts", which are implicated in membrane signaling and trafficking. Recently, photo-sensitive lipids were introduced to study membrane domain organization, and photo-isomerization was shown to trigger the mixing and de-mixing of liquid-ordered (l_o ) domains in artificial phase-separated membranes. Here, we synthesized globotriaosylceramide (Gb₃ ) glycosphingolipids that harbor an azobenzene moiety at different positions of the fatty acid to investigate light-induced membrane domain reorganization, and that serve as specific receptors for the protein Shiga toxin (STx). Using phase-separated supported lipid bilayers on mica surfaces doped with four different photo-Gb₃ molecules, we found by fluorescence microscopy and atomic force microscopy that liquid disordered (l_d ) domains were formed within l_o domains upon trans-cis photo-isomerization. The fraction and size of these l_d domains were largest for Gb₃ molecules with the azobenzene group at the end of the fatty acid. We further investigated the impact of domain reorganization on the interaction of the B-subunits of STx with the photo-Gb₃ . Fluorescence and atomic force micrographs clearly demonstrated that STxB binds to the l_o phase if Gb₃ is in the trans-configuration, whereas two STxB populations are formed if the photo-Gb₃ is switched to the cis-configuration highlighting the idea of manipulating lipid-protein interactions with a light stimulus.

Controlling the LCST-Phase Transition in Azobenzene-Functionalized Poly (N-Isopropylacrlyamide) Hydrogels by Light

Poly(N-isopropylacrylamide) PNIPAAm hydrogels were modified with a new azobenzene-containing co-monomer. In this work, light responsiveness as an additional functionality, is conceptualized to induce two phase transitions in the same material, which can be controlled by light. For a hydrogel with merely 2.5 mol% of this co-monomer, the lower critical solution transition temperature (LCST) was lowered by 12 °C (to 20 °C) compared to PNIPAAm (LCST at 32 °C), as analyzed by differential scanning calorimetry (DSC). The untreated unimodal endotherm split into a bimodal peak upon irradiation with UV-light, giving a second onset due to the switched (Z) isomer-rich regions, LCST*_H2.5%-(Z) = 26 °C. On irradiation with 450 nm, leading to the reverse (Z) to (E) isomerization, the endotherm was also reversible. Thus, a photo-switchable hydrogel whose LCST and structure are tunable with the hydrophobicity-hydrophilicity of the (E) and (Z) isomeric state of azobenzene was obtained. The influence of the increase in the mol% of azoacrylate on the LCST was evaluated via DSC, in combination with NMR studies, UV-vis spectroscopy and control experiments with linear polymers. The large light-driven modulation of the LCST adds bistability in thermoresponsive hydrogels, which may open diverse applications in the field of soft robotics actuators.