Dimensional Reduction of Cs2 AgBiBr6 : A 2D Hybrid Double Perovskite with Strong Polarization Sensitivity

Fine Tuning Ag(I)-Sb(III) Hybrid Iodides for Light Detection

Lead-free hybrid double perovskite iodides (HDPIs) have piqued increasing research interest due to their environmental friendliness and high stability. However, such antimony-based HDPIs with strong photocurrent response are currently very limited. Here, we successfully design and construct five Ag(I)-Sb(III)-based HDPIs using two types of cyclic aliphatic amines as A-site templates. Interestingly, these Ag(I)-Sb(III) HDPIs exhibit relatively narrow band gaps, preferred orientation, and high stability after being processed into thin films on the indium tin oxide (ITO) substrate. Notably, under illuminations of a xenon lamp, all HDPIs exhibit considerable photocurrent responses, reaching a maximum difference of 17 μA·cm-2 for ASI 1, which is the highest among lead-free halogen-based organic-inorganic hybrid compounds to date. Combining the considerable photocurrents and the high stability, the optoelectronic applications of two-dimensional Ag(I)-Sb(III) HDPIs can be expected.

Dynamical control of nanoscale light-matter interactions in low-dimensional quantum materials

Tip-enhanced nano-spectroscopy and -imaging have significantly advanced our understanding of low-dimensional quantum materials and their interactions with light, providing a rich insight into the underlying physics at their natural length scale. Recently, various functionalities of the plasmonic tip expand the capabilities of the nanoscopy, enabling dynamic manipulation of light-matter interactions at the nanoscale. In this review, we focus on a new paradigm of the nanoscopy, shifting from the conventional role of imaging and spectroscopy to the dynamical control approach of the tip-induced light-matter interactions. We present three different approaches of tip-induced control of light-matter interactions, such as cavity-gap control, pressure control, and near-field polarization control. Specifically, we discuss the nanoscale modifications of radiative emissions for various emitters from weak to strong coupling regime, achieved by the precise engineering of the cavity-gap. Furthermore, we introduce recent works on light-matter interactions controlled by tip-pressure and near-field polarization, especially tunability of the bandgap, crystal structure, photoluminescence quantum yield, exciton density, and energy transfer in a wide range of quantum materials. We envision that this comprehensive review not only contributes to a deeper understanding of the physics of nanoscale light-matter interactions but also offers a valuable resource to nanophotonics, plasmonics, and materials science for future technological advancements.

Realization of High-Performance Self-Powered Polarized Photodetection with Large Temperature Window in a 2D Polar Perovskite

Polarization photodetection taking advantage of the anisotropy of 2D materials shines brilliantly in optoelectronic fields owing to differentiating optical information. However, the previously reported polarization detections are mostly dependent on external power sources, which is not conducive to device integration and energy conservation. Herein, a 2D polar perovskite (CBA)2 CsPb2 Br7 (CCPB, CBA = 4-chlorobenzyllamine) has been successfully synthesized, which shows anticipated bulk photovoltaic effect (BPVE) with an open-circuited photovoltage up to ≈0.2 V. Devices based on CCPB monomorph fulfill a fascinating self-powered polarized photodetection with a large polarization ratio of 2.7 at room temperature. Moreover, CCPB features a high phase-transition temperature (≈475 K) which prompts such self-powered polarized photodetection in a large temperature window of device operation, since BPVE generated by spontaneous polarization can only exist in the polar structure prior to the phase transition. Further computational investigation reveals the introduction of CBA+ with a large dipole moment contributes to quite large polarization (17.5 µC cm-2 ) and further super high phase transition temperature of CCPB. This study will promote the application of 2D perovskite materials for self-powered polarized photodetection in high-temperature conditions.

Circularly Polarized Light-Dependent Pyro-Phototronic Effect from 2D Chiral-Polar Double Perovskites

Chiral hybrid perovskites combine the advantages of chiral materials and halide perovskites, offering an ideal platform for the design of circularly polarized light (CPL) detectors. The pyro-phototronic effect, as a special mechanism of the photoexcited pyroelectric signal, can significantly improve the performance of photodetectors, whereas it remains a great challenge to achieve pyroelectricity-based CPL detection. In this work, the chiroptical phenomena and the pyro-phototronic effect are combined in chiral-polar perovskites to achieve unprecedented pyroelectric-based CPL detection. Two novel two-dimensional (2D) lead-free chiral-polar double perovskites, S/R-[(4-aminophenyl)ethylamine]2AgBiI8·0.5H2O, are successfully designed and synthesized by introducing chiral organic ligands into metal halide frameworks. Strikingly, the photoresponse is substantially boosted with the support of the pyro-phototronic effect, showing an increased pyro-phototronic current that is 40 times greater than the photovoltaic current. Furthermore, the pyroelectric-based detector possesses excellent CPL detection capacity to distinguish different polarization states of CPL photons, which achieve an impressive glph of up to 0.27 at zero bias. This study provides a brand new process for CPL detection by utilizing the pyro-phototronic effect in chiral-polar perovskites, which opens a new avenue for chiral materials in optoelectronic applications.

Bulk Photovoltaic Effect Along the Nonpolar Axis in Organic-Inorganic Hybrid Perovskites

The origin of the bulk photovoltaic effect (BPVE) was considered as a built-in electric field formed by the macroscopic polarization of materials. Alternatively, the "shift current mechanism" has been gradually accepted as the more appropriate description of the BPVE. This mechanism implies that the photocurrent generated by the BPVE is a topological current featuring an ultrafast response and dissipation-less nature, which is very attractive for photodetector applications. Meanwhile, the origin of the BPVE in organic-inorganic hybrid perovskites (OIHPs) has not been discussed and is still widely accepted as the classical mechanism without any experimental evidence. Herein, we observed the BPVE along the nonpolar axis in OIHPs, which is inconsistent with the classical explanation. Furthermore, based on the nonlinear optical tensor correlation, we substantiated that the BPVE in OIHPs is originated in the shift current mechanism.

Fabricating a type II heterojunction by growing lead-free perovskite Cs2AgBiBr6in situ on graphite-like g-C3N4 nanosheets for enhanced photocatalytic CO2 reduction

Perovskite-based photocatalysts have received significant attention for converting CO2 into fuels, such as CO, CH4 or long alkyl chains. However, the use of these catalysts is plagued by several limitations, such as poor stability, lead toxicity, and inadequate conversion efficiency due to the rapid recombination of carriers. Herein, a g-C3N4@Cs2AgBiBr6 (CABB) type II heterojunction photocatalyst has been prepared by growing lead-free CABB nanocrystals (10-14 nm) on the graphite-like carbon nitride (g-C3N4) nanosheet using the in situ crystallization method. The resulting nanocomposite, g-C3N4@CABB, demonstrated an efficient charge transfer pathway via a typical type II heterojunction. With formation rates of 10.30 μmol g-1 h-1 for CO and 0.88 μmol g-1 h-1 for CH4 under visible light irradiation, the nanocomposite exhibited enhanced photocatalytic efficiency in CO2 reduction compared to CABB and g-C3N4. The improved photocatalytic performance of the g-C3N4@CABB nanocomposite was attributed to the fabricated type II heterojunction, which boosted the interfacial charge transfer from g-C3N4 to CABB. This work will inspire the design of heterojunction-based photocatalysts and increase the fundamental understanding of perovskite-based catalysts in the CO2 photoreduction process.

Quantum tailoring for polarization-discriminating Bi2S3 nanowire photodetectors and their multiplexing optical communication and imaging applications

In this study, cost-efficient atmospheric pressure chemical vapor deposition has been successfully developed to produce well-aligned high-quality monocrystalline Bi2S3 nanowires. By virtue of surface strain-induced energy band reconstruction, the Bi2S3 photodetectors demonstrate a broadband photoresponse across 370.6 to 1310 nm. Upon a gate voltage of 30 V, the responsivity, external quantum efficiency, and detectivity reach 23 760 A W-1, 5.55 × 106%, and 3.68 × 1013 Jones, respectively. The outstanding photosensitivity is ascribed to the high-efficiency spacial separation of photocarriers, enabled by synergy of the axial built-in electric field and type-II band alignment, as well as the pronounced photogating effect. Moreover, a polarization-discriminating photoresponse has been unveiled. For the first time, the correlation between quantum confinement and dichroic ratio is systematically explored. The optoelectronic dichroism is established to be negatively correlated with the cross dimension (i.e., width and height) of the channel. Specifically, upon 405 nm illumination, the optimized dichroic ratio reaches 2.4, the highest value among the reported Bi2S3 photodetectors. In the end, proof-of-concept multiplexing optical communications and broadband lensless polarimetric imaging have been implemented by exploiting the Bi2S3 nanowire photodetectors as light-sensing functional units. This study develops a quantum tailoring strategy for tailoring the polarization properties of (quasi-)1D material photodetectors whilst depicting new horizons for the next-generation opto-electronics industry.

Precise Design of Molecular Ferroelectrics with High TC and Tunable Band Gap by Molecular Modification

Molecular ferroelectric materials are widely applied in piezoelectric converters, non-volatile memorizers, and photovoltaic devices due to their advantages of adjustable structure, lightweight, easy processing, and environmental friendliness. However, designing multifunctional molecular ferroelectrics with excellent properties has always been a great challenge. Herein, a multiaxial molecular ferroelectric is successfully designed by modifying the quasi-spherical cation dabco with CuBr₂ to obtain halogenated [Bretdabco]CuBr₄ (Bretdabco = N-bromoethyl-N'-diazabicyclo [2.2.2]octane), which crystallizes in polar point groups (C₆). Typical ferroelectric behaviors featured by the P-E hysteresis loop and switched ferroelectric domain are exhibited. Notably, the molecular ferroelectric shows a high T_C of 460 K, which is rare in the field and could greatly expand the application range of this material. In addition, the band gap is adjustable through the regulation of halogen. Both the UV absorption spectra and theoretical calculations indicate that the molecular ferroelectrics belong to a direct band gap (2.14 eV) semiconductor. This tunable and narrow band gap semiconductor molecular ferroelectric material with high T_C can be utilized more effectively in the study of optoelectronics and sensors, including piezoelectric energy harvesters. This research may provide a promising approach for the development of multiaxial molecular ferroelectrics with a tiny band gap and high T_C.

Anisotropic Heavy-Metal-Free Semiconductor Nanocrystals: Synthesis, Properties, and Applications

Heavy-metal (Cd, Hg, and Pb)-containing semiconductor nanocrystals (NCs) have been explored widely due to their unique optical and electrical properties. However, the toxicity risks of heavy metals can be a drawback of heavy-metal-containing NCs in some applications. Anisotropic heavy-metal-free semiconductor NCs are desirable replacements and can be realized following the establishment of anisotropic growth mechanisms. These anisotropic heavy-metal-free semiconductor NCs can possess lower toxicity risks, while still exhibiting unique optical and electrical properties originating from both the morphological and compositional anisotropy. As a result, they are promising light-emitting materials in use various applications. In this review, we provide an overview on the syntheses, properties, and applications of anisotropic heavy-metal-free semiconductor NCs. In the first section, we discuss hazards of heavy metals and introduce the typical heavy-metal-containing and heavy-metal-free NCs. In the next section, we discuss anisotropic growth mechanisms, including solution-liquid-solid (SLS), oriented attachment, ripening, templated-assisted growth, and others. We discuss mechanisms leading both to morphological anisotropy and to compositional anisotropy. Examples of morphological anisotropy include growth of nanorods (NRs)/nanowires (NWs), nanotubes, nanoplatelets (NPLs)/nanosheets, nanocubes, and branched structures. Examples of compositional anisotropy, including heterostructures and core/shell structures, are summarized. Third, we provide insights into the properties of anisotropic heavy-metal-free NCs including optical polarization, fast electron transfer, localized surface plasmon resonances (LSPR), and so on, which originate from the NCs' anisotropic morphologies and compositions. Finally, we summarize some applications of anisotropic heavy-metal-free NCs including catalysis, solar cells, photodetectors, lighting-emitting diodes (LEDs), and biological applications. Despite the huge progress on the syntheses and applications of anisotropic heavy-metal-free NCs, some issues still exist in the novel anisotropic heavy-metal-free NCs and the corresponding energy conversion applications. Therefore, we also discuss the challenges of this field and provide possible solutions to tackle these challenges in the future.

Challenges and developments for the blue perovskite nanocrystal light-emitting diodes

Perovskite nanomaterials have been highly thought as next-generation light emitters after recent development owing to their benefits of simple synthesis, low-cost, large-area, and wide color gamut. Encouragingly, the external quantum efficiencies (EQEs) of green, red, and near-infrared perovskite light-emitting diodes (PeLEDs) have exceeded more than 20%. However, the performance of the blue PeLEDs is still lower than other analogs, which severely limits the applications of PeLEDs in future full-color displays. Herein, we have reviewed the advances in blue perovskite NCs and their applications in blue PeLEDs. Promising blue perovskite emitters and strategies for fabricating highly efficient blue PeLEDs based on perovskite NCs are investigated and highlighted. Moreover, we point out the main challenges in blue perovskite NC LEDs including low electroluminescence efficiency (EL), spectral instability, the difficulty of charge injection, and device optimization. The perspectives for the further development of blue PeLEDs are also presented.

Near-infrared polarization-sensitive photodetection via interfacial symmetry engineering of an Si/MAPbI3 heterostructural single crystal

Methylammonium lead iodide (MAPbI₃) single crystals (SCs) have drawn particular attention in the optoelectronics field, due to their outstanding photoelectric performance. However, the structures of those MAPbI₃ SCs are isotropic, which limits the further application of the materials for polarization-sensitive photodetection. Here, we propose a strategy of symmetry modulation by heterogeneously integrating large-sized MAPbI₃ SCs with silicon (Si) wafers and we give the first demonstration of self-powered near-infrared (NIR) polarization-sensitive photodetection using MAPbI₃ SCs. Created via a delicate solution method, the MAPbI₃/Si heterostructures show a high crystalline quality and a solid interfacial connection. More importantly, the built-in electric field resulting from the band bending at the MAPbI₃/Si heterostructure interface generates polar symmetry, which enables directional transport of photogenerated carriers, making the MAPbI₃/Si heterostructures highly polarization-sensitive. Consequently, in the self-powered mode, NIR photodetectors of MAPbI₃/Si heterostructures exhibit large polarization ratios of 3.3 at 785 nm and 2.8 at 940 nm. Moreover, a high detectivity of 7.35 × 10¹² Jones of the present devices is also achieved. Our work gives the first demonstration of self-powered polarization-sensitive photodetection of MAPbI₃ SCs and provides a strategy to design polarization-sensitive materials beyond the conventional limitations induced by isotropic structures.

First-principles study on photoelectric properties of all-inorganic two-dimensional double perovskite Cs3AgBiBr7

Two-dimensional (2D) all-inorganic double perovskite materials have attracted great interest owing to their unique photoelectric characteristics, such as high quantum efficiency and relative stability. However, few studies have been conducted on the 2D all-inorganic double perovskite Cs₃AgBiBr₇, and its photoelectric properties are unclear. In this study, we present a detailed investigation of the band structure, optical absorption spectrum, carrier mobility and exciton binding energy of the double perovskite Cs₃AgBiBr₇ based on the first-principles. The results show that this system has an indirect band gap and low carrier mobility, high exciton binding energy (2041.38 meV) and significant light absorption in the UV region. We also find that the material may be a potential exciton insulation candidate owing to the exciton binding energy beyond the band gap. Our calculated results also show that low dimensional perovskite Cs₃AgBiBr₇ is more suitable for luminescence than a photovoltaic device. We hope our theoretical results will inspire and promote the experimental exploration of 2D all-inorganic double perovskite materials for photoelectric applications.

An Effective Strategy of Introducing Chirality to Achieve Multifunctionality in Rare-Earth Double Perovskite Ferroelectrics

The hybrid rare-earth double perovskite (HREDP) system provides great convenience for the construction of multifunctional materials. However, suffering from the high symmetry of their intrinsic structure, HREDPs face the challenges in the realization and optimization of ferroelectric and piezoelectric properties. For the first time, after a systematic investigation of the chirality transformation principle, it is found that the introduction of chirality is an efficient strategy for the targeted construction of multifunctionality, which simultaneously increases the possibility of obtaining multiaxial ferroelectricity and ferroelasticity, and effectively realizes a large piezoelectric response. Moreover, chirality induced ferroelasticity will also achieve excellent magnetic or optical response driven by pressure-sensitive. To verify the feasibility of the above ideas, by using rare-earth ions (Ce³⁺ ) and suitable chiral organic cations, a new HREDP, (R-N-methyl-3-hydroxylquinuclidinium)₂ RbCe(NO₃ )₆ (R1) is successfully designed, in which ferroelasticity, multiaxial ferroelectricity, satisfactory piezoelectric response, and the pressure-driven single-ion magnetics switch are simultaneously achieved for the first time. This work shows that the induction of chirality and the HREDP system provide an effective strategy and ideal platform for the expansion and optimization of the functions in perovskite ferroelectrics.

Self-Assembly of 2D Hybrid Double Perovskites on 3D Cs2 AgBiBr6 Crystals towards Ultrasensitive Detection of Weak Polarized Light

We report the self-assembly of 2D double perovskite (BLA)₂ CsAgBiBr₇ (BLA=benzylammonium) on 3D Cs₂ AgBiBr₆ crystals, providing the first demonstration of polarization-sensitive photodetection using lead-free double perovskite heterocrystals (HCs). The (BLA)₂ CsAgBiBr₇ /Cs₂ AgBiBr₆ HC successfully combines the anisotropy of 2D double perovskites with the well-defined interface provided by heterogeneous integration. Driven by the built-in electric field in junction, photodetectors of HCs exhibit unique polarization dependence of zero-bias photocurrent with a large anisotropy ratio up to 9, which is 6 times amplified as compared to the pristine 2D (BLA)₂ CsAgBiBr₇ . More importantly, the present devices can remain polarization-sensitive with incident light intensity down to the nW cm^-2 level. Our study on lead-free hybrid perovskite HCs marks a step toward establishing robust material foundations for fundamental scientific investigations and the development of optoelectronic devices.

Dehydration-activated structural phase transition in a two-dimensional hybrid double perovskite

As a feasible lead-free scheme, organic-inorganic hybrid double perovskites show many excellent properties, including ferroelectricity, ferroelasticity, self-powered circularly polarized light detection and so on. In this work, the solid-to-solid structural phase transition of a two-dimensional hybrid double perovskite (CHA)₄CuBiI₈ was successfully activated via the dehydration of (CHA)₄CuBiI₈·H₂O, which was proven by differential scanning calorimetry (DSC) and temperature-dependent dielectric measurements. Using variable-temperature single-crystal X-ray diffractometry, the cause behind the phase transition of (CHA)₄CuBiI₈ was determined to be the overall coordination of distortion and movement of the inorganic skeleton and thermal deformation of the cationic structure. In addition, the substance after dehydration shows good stability in multiple reversible switching during dielectric tests. The interesting dehydration-activated results of the material contribute towards a further expansion of the properties and potential application of hybrid double perovskites.

Realization of In-Plane Polarized Light Detection Based on Bulk Photovoltaic Effect in A Polar Van Der Waals Crystal

2D van der Waals materials are widely explored for in-plane polarized light detection owing to their distinctive in-plane anisotropic feature. However, most of these polarized light-sensitive devices root in their low symmetry of in-plane structure and work depending on external power sources, which greatly impedes the simplification of integrated devices and sustainable development. Bulk photovoltaic effect (BPVE), which separates photoexcited carriers via built-in electric field without an external power source and shows an angle-dependence on light polarization, is promising for self-powered polarized light detection to break through the restriction of in-plane anisotropy. Herein, a 2D lead-free van der Waals perovskite (Cl-PMA)₂ CsAgBiBr₇ (1, Cl-PMA = 4-Chlorobenzylamine) is successfully designed through the dimension reduction strategy. 1 exhibits BPVE with an open-circuited photovoltage up to ≈0.5 V. Driven by the BPVE, self-powered in-plane polarized light detection with a large polarization ratio of 1.3 is obtained for 1. As far as it is known, the first in-plane polarized light detection in hybrid perovskites based on BPVE is realized here. This work highlights the strategy of designing lead-free hybrid perovskite with BPVE and opens an avenue for exploiting in-plane highly sensitive polarized light detection in 2D van der Waals materials.

Perovskite-Type 2D Materials for High-Performance Photodetectors

Photodetectors are light sensors in widespread use in image sensing, optical communication, and consumer electronics. In current smart optoelectronic technology, conventional semiconductors have encountered a bottleneck caused by inflexibility and opacity. With the ever-increasing demands for versatile optoelectronic applications, perovskite-type 2D materials demonstrate great potential for advanced photodetectors inspired by molecularly thin 2D materials. Through the reduction of thickness to thin or molecularly thin levels, single-crystalline 2D perovskites can exhibit superior optoelectronic performance characteristics, such as tunable absorption property by chemical design, enhanced carrier separation by remarkable photosensing capability, and improved carrier extraction by versatile band engineering. More importantly, perovskite-type 2D materials exhibit great potential for large-scale monolithic integration to achieve all-in-one sensing-memory-computing optoelectronic devices. In this Perspective, recent progress in 2D perovskite-based photodetectors is presented in detail. The focus is on growth strategies for reducing thickness, thickness-dependent optical and electrical properties, device engineering, heterojunction fabrication, and device performance. Finally, the current challenges and future prospects in this field are presented.

Organic Spacer Cation Assisted Modulation of the Structure and Properties of Bismuth Halide Perovskites

ConspectusLead halide perovskites are under the spotlight of current research due to their potential for efficient and cost-effective next-generation optoelectronic devices. The unique photonic and electronic properties of these solution-processable materials brought them to the forefront of materials science. However, the toxicity and instability of lead-based perovskites are the major hurdles for their commercialization. These issues initiated an effort towards the development of environmentally friendly, lead-free perovskites. In this context, bismuth halide perovskites (BHPs) were ideal rivals for lead-based congeners due to their excellent chemical stability, lower toxicity, and structural versatility. Understanding the crystal structure and optoelectronic properties of BHPs is crucial for designing them for specific, tailor-made applications. This Account aims to review our recent research progress on the role of functional organic spacer cations in modulating the electronic confinements, optical properties, and photoconductivity of BHPs. We have employed a comprehensive experimental and theoretical investigation to probe the intriguing optical and electronic properties of these materials. Our findings on the structure-optoelectronic property correlations will be valuable guidelines for the rational selection of organic spacer cations in designing BHPs featuring low exciton binding energy, narrow optical bandgap, enhanced visible light absorption, and high photoconductivity. One of our key findings is that by increasing the electron affinity of the organic spacer ligands, photoconductivity and visible light absorption of BHPs could be significantly enhanced. We hope that the fundamental level understanding of the photophysical properties discussed in this Account will lead to new design rules for developing high-performance BHP materials.

Germanium Halides Serving as Ideal Precursors: Designing a More Effective and Less Toxic Route to High-Optoelectronic-Quality Metal Halide Perovskite Nanocrystals

The three-precursors approach has proven to be advantageous for obtaining high-quality metal halide perovskite nanocrystals (PNCs). However, the current halide precursors of choice are mainly limited to those highly toxic organohalides, being unfavorable for large-scale and sustainable use. Moreover, most of the resulting PNCs still suffer from low quality in terms of photoluminescence quantum yield (PLQY). Herein we present all-inorganic germanium salts, GeX₄ (X = Cl, Br, I), serving as robust and less hazardous alternatives that are capable of ensuring improved material properties for both Pb-based and Pb-free PNCs. Importantly, unlike most of the other inorganic halide sources, the GeX₄ compound does not deliver the Ge element into the final compositions, whereas the PLQY and phase stability of the resulting nanocrystals are significantly improved. Theoretical calculations suggest that Ge halide precursors provide favorable conditions in both dielectric environment and thermodynamics, which jointly contribute to the formation of size-confined defect-suppressed nanoparticles.

A Cd-based perovskite with optical-electrical multifunctional response

Two-dimensional (2D) organic-inorganic hybrid perovskites (OIHPs) have drawn tremendous attention on account of their structural tunability, simple synthesis mothed, superior properties. Among them, 2D cadmium-based perovskites, exhibiting reversible phase transition,...

The construction of a two-dimensional organic–inorganic hybrid double perovskite ferroelastic with a high Tc and narrow band gap

Two-dimensional (2D) hybrid double perovskites have attracted extensive research interest for their fascinating physical properties, such as ferroelectricity, X-ray detection, light response and so on. In addition, ferroelastics, as an important branch of ferroic materials, exhibits wide prospects in mechanical switches, shape memory and templating electronic nanostructures. Here, we designed a 2D phase-transition double perovskite ferroelastic through a structurally progressive strategy. This evolution is core to our construction process from 0D to 1D and AgBi-based 2D. In this way, we successfully synthesized 2D lead-free ferroelastic (DPA)₄AgBiBr₈ (DPA = 2,2-dimethylpropan-1-aminium) with a high Curie temperature (T_c), which shows a narrower band gap than 0D (DPA)₄Bi₂Br₁₀ and 1D (DPA)₅Pb₂Br₉. Moreover, the mechanism of structural phase transition and molecular motion are fully characterized by temperature dependent solid-state NMR and single crystal XRD. (DPA)₄AgBiBr₈ injects power into the discovery of new ferroelastics or the construction and dimensional adjustment in new hybrid double perovskites.

By using a lead-free AgBi-based scheme, we successfully synthesized a two-dimensional double perovskite ferroelastic (DPA)₄AgBiBr₈ with high T_c of 375 K and a narrow band gap of 2.44 eV, where DPA is 2,2-dimethylpropan-1-aminium.

Rational design of high-quality 2D/3D perovskite heterostructure crystals for record-performance polarization-sensitive photodetection

Polarization-sensitive photodetection is central to optics applications and has been successfully demonstrated in photodetectors of two-dimensional (2D) materials, such as layered hybrid perovskites; however, achieving high polarization sensitivity in such a photodetector remains extremely challenging. Here, for the first time, we demonstrate a high-performance polarization-sensitive photodetector using single-crystalline 2D/3D perovskite heterostructure, namely, (4-AMP)(MA)₂Pb₃Br₁₀/MAPbBr₃ (MA = methylammonium; 4-AMP = 4-(aminomethyl)piperidinium), which exhibits ultrahigh polarization sensitivity up to 17.6 under self-driven mode. To our knowledge, such a high polarization selectivity has surpassed all of the reported perovskite-based devices, and is comparable to, or even better than, the traditional inorganic heterostructure-based photodetectors. Further studies reveal that the built-in electric field formed at the junction can spatially separate the photogenerated electrons and holes, reducing their recombination rate and thus enhancing the performance for polarization-sensitive photodetection. This work provides a new source of polarization-sensitive materials and insights into designing novel optoelectronic devices.

Lead-Free Perovskite Single Crystals: A Brief Review

Lead-free perovskites have received remarkable attention because of their nontoxicity, low-cost fabrication, and spectacular properties including controlled bandgap, long diffusion length of charge carrier, large absorption coefficient, and high photoluminescence quantum yield. Compared with the widely investigated polycrystals, single crystals have advantages of lower trap densities, longer diffusion length of carrier, and extended absorption spectrum due to the lack of grain boundaries, which facilitates their potential in different fields including photodetectors, solar cells, X-ray detectors, light-emitting diodes, and so on. Therefore, numerous research focusing on the novel properties, preparation methods, and remarkable progress in applications of lead-free perovskite single crystals (LFPSCs) has been extensively studied. In this review, the current advancements of LFPSCs are briefly summarized, including the synthesis approaches, compositional and interfacial engineering, and stability of several representative systems of LFPSCs as well as the reported practical applications. Finally, the critical challenges which limit the performance of LFPSCs, and their inspiring prospects for further developments are also discussed.

Centimeter-Sized Single Crystal of a One-Dimensional Lead-Free Mixed-Cation Perovskite Ferroelectric for Highly Polarization Sensitive Photodetection

Linear dichroic anisotropic photonic materials are highly attractive due to their great potentials in many applications, which in combination with the ferroelectric properties could broaden their research and applications. However, to date, the linear dichroism conversion phenomenon has not been observed in one-dimensional (1D) large-size single-crystal materials: in particular, lead-free perovskite ferroelectric crystals. Here, we propose a new ferroelectric design strategy: namely, partial organic cation substitution for precisely designing 1D polarization-sensitive perovskite ferroelectrics. As an example, the 1D mixed-cation perovskite ferroelectric (n-propylammonium)(methylammonium)SbBr₅ was synthesized, which exhibits a fascinating ferroelectricity with a notable reversible polarization of 2.9 μC/cm² and a large ferroelectricity-driven polarization ratio of 6.9. Importantly, the single-crystalline photodetectors also exhibit superior optoelectronic anisotropic performances at the paraelectric phase, having a large photoelectric anisotropy ratio (∼35), an excellent polarization-sensitive dichroism ratio (∼1.31), highly sensitive detectivity up to ∼10⁹ Jones, and a fast response rate (∼45/68 μs). This finding provides a significant and effective pathway for the targeted design of new functional lead-free linear dichroic anisotropic photonic ferroelectrics.

High-Curie Temperature Multilayered Hybrid Double Perovskite Photoferroelectrics Induced by Aromatic Cation Alloying

Due to the breakthrough development of layered hybrid perovskites, the multilayered hybrid double perovskites have emerged as outstanding semiconducting materials owing to their environmental friendliness and superior stability. Despite recent booming advances, the realization of above-room temperature ferroelectricity in this fascinating family remains a huge challenge. Herein, when the molecular design strategy of aromatic cation alloying is applied, an above-room temperature "green" bilayered hybrid double perovskite photoferroelectric, (C₆H₅CH₂NH₃)₂CsAgBiBr₇ (BCAB), is successfully developed with a notable saturation polarization of 10.5 μC·cm^-2 and high-Curie temperature (T_c ∼ 483 K). Strikingly, such a T_c achieves a new record in multilayered hybrid perovskite ferroelectrics, which extends the ferroelectric working temperature to a high level. Further computational investigation reveals that the high-T_c originated from the high phase-transition energy barrier switched by the rotation of the aromatic cation in the confined environment of the inorganic layers. In addition, benefiting from the attractive polarization and remarkable photoelectric properties, a bulk photovoltaic effect (BPVE) with a prominent zero-bias photocurrent (2.5 μA·cm^-2) is achieved. As far as we know, such a high-T_c multilayered hybrid double perovskite ferroelectric is unprecedented, which sheds light on the rational design of an environmental photoferroelectric for high performance photoelectric devices.

Two-Dimensional Guanidine-Based Hybrid Perovskites with Strong Dichroism for Multiwavelength Polarization-Sensitive Detection

Two-dimensional (2D) organic-inorganic hybrid perovskites, benefiting from their natural anisotropy of quantum-well motifs and optical properties, have shown remarkable polarization-dependent responses superior to the 3D counterparts. Here, for the first time, multiwavelength polarization-sensitive detectors were fabricated by using single crystals of a guanidine-based 2D hybrid perovskite, (BA)₂ (GA)Pb₂ I₇ (where BA⁺ is n-butylammonium and GA⁺ is guanidium). Its unique 2D quantum-well structure results in strong crystallographic-dependence of optical absorption. Strikingly, our crystal-based photodetector exhibits a prominent photocurrent dichroic ratio (I_max /I_min ) of ∼2.2 at 520 nm, higher than the typical 2D inorganic materials (GeSe, ∼1.09, PdSe₂ , ∼1.8). In addition, notable dichroic ratios of 1.29 and 1.23 at 405 nm and 637 nm are also created for the multiwavelength polarized-light detection. The prominent detecting performances, including low dark current (1.6×10^-11  A), considerable on/off ratio (∼2×10³ ), high photodetectivity (∼3.3×10¹¹ Jones) and responsivity (∼12.01 mA W^-1 ), make (BA)₂ (GA)Pb₂ I₇ a promising candidate for polarized-light detection. This work sheds light on the rational engineering of new 2D hybrid perovskites for the high-performance optoelectronic device applications.

Highly In-Plane Polarization-Sensitive Photodetection in CsPbBr3 Single Crystal

The fully inorganic perovskite lead cesium bromide single crystal (CsPbBr₃ SC) is considered as an excellent candidate semiconductor for photodetectors because of its superior humidity resistance, thermal stability, and light stability compared with organic-inorganic hybrid perovskites as well as its photoelectric properties such as large light absorption coefficient and ultralong carrier migration distance. In this Letter, we utilize the inverse temperature solubility of CsPbBr₃ in ternary solvents to grow large-sized CsPbBr₃ SCs. By the use of the (101) plane, CsPbBr₃ SC-based photodetectors are fabricated, which exhibit excellent polarized light response characteristics. The photocurrent relies on the polarization angle in a sinusoidal fashion and shows strong anisotropic optoelectronic properties. The photodetection performance perpendicular to the y axis is significantly higher than that parallel to the y axis, and the dichroic ratio under 405 nm illumination at a bias voltage of 1 V reaches 2.65. The experimental results are consistent with the results of first-principles calculations.

Ultrasensitive polarized-light photodetectors based on 2D hybrid perovskite ferroelectric crystals with a low detection limit

Polarized-light photodetectors are the indispensable elements for practical optical and optoelectronic device applications. Two-dimensional (2D) hybrid perovskite ferroelectrics, in which the coupling of spontaneous polarization (P_s) and light favors the dissociation of photo-induced carriers, have taken a booming position within this portfolio. However, polarized-light photodetectors with a low detection-limit remain unexplored in this 2D ferroelectric family. In this work, the high-quality individual crystals of a 2D perovskite ferroelectric, BA₂CsPb₂Br₇ (1, where BA⁺ is n-butylammonium), were used to fabricate ultrasensitive polarized-light detectors. Its unique bilayered structural motif results in quite strong electric and optical anisotropy with a large absorption ratio of α_c/α_a ≈ 3.2 (λ = 405 nm). Besides, the presence of ferroelectric P_s also endows high built-in electric field along the polar c-axis that favors photoelectric activities. Under an extremely low detectable limit of 40 nW/cm², the detector of 1 exhibits a notable dichroism ratio (I_ph^c/I_ph^a ≈ 1.5), a large responsivity of ~39.5 mA/W and a specific detectivity of ~1.2 × 10¹² Jones. Moreover, crystal-based devices of 1 also exhibit a fast response speed (~300 μs) and excellent anti-fatigue merits. This work highlights great potentials of hybrid perovskite ferroelectrics toward polarized-light photodetection.

A high-temperature halide perovskite molecular ferroelastic with evident dielectric switching

Under the quasi-spherical strategy, a hybrid halide perovskite (TMTB)CdCl₃ is designed and synthesized and shows evident high-temperature ferroelastic phase transition and dielectric switching.