Ordered Mesoporous Carbons with Graphitic Tubular Frameworks by Dual Templating for Efficient Electrocatalysis and Energy Storage

Hierarchical porous carbon materials for lithium storage: preparation, modification, and applications

Secondary battery as an efficient energy conversion device has been highly attractive for alleviating the energy crisis and environmental pollution. Hierarchical porous carbon (HPC) materials with multiple sizes pore channels are considered as promising materials for energy conversion and storage applications, due to their high specific surface area and excellent electrical conductivity. Although many reviews have reported on carbon materials for different fields, systematic summaries about HPC materials for lithium storage are still rare. In this review, we first summarize the main preparation methods of HPC materials, including hard template method, soft template method, and template-free method. The modification methods including porosity and morphology tuning, heteroatom doping, and multiphase composites are introduced systematically. Then, the recent advances in HPC materials on lithium storage are summarized. Finally, we outline the challenges and future perspectives for the application of HPC materials in lithium storage.

Crucial Role of Metal Coordination Number in Optimizing Electrocatalyst Activity of Holey Large-Area 2D Ru Nanosheets

Low-dimensional metal nanostructures have attracted considerable research attention, owing to their potential as catalysts. A controlled reductive phase transition of monolayer RuO2 nanosheets could provide an effective way to produce holey large-area 2D Ru nanosheets with tailored defect structures and metal coordination number. The locally optimized holey Ru metal nanosheet, with a metal coordination number of ∼10.2, exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) with a reduced overpotential of 38 mV in a 1 M KOH electrolyte. The creation of a highly anisotropic holey nanosheet morphology with optimization of local structure was quite effective in developing efficient catalyst materials. The universal importance of controlling the coordination number was confirmed through a comparative study of Ru nanoparticles, which showed optimized HER activity with an identical metal coordination number. The coordination number plays a pivotal role in governing electrocatalytic activity, which could be ascribed to the formation of the most active structure for HER at most 2 defects near active sites (2,2'), resulting in the stabilization of a dihydrogen Ru-(H2) intermediate and the increased contribution of Volmer-Tafel mechanism.

Regulating Local Atomic Environment around Vacancies for Efficient Hydrogen Evolution

Defect engineering is essential for the development of efficient electrocatalysts at the atomic level. While most work has focused on various vacancies as effective catalytic modulators, little attention has been paid to the relation between the local atomic environment of vacancies and catalytic activities. To face this challenge, we report a facile synthetic approach to manipulate the local atomic environments of vacancies in MoS2 with tunable Mo-to-S ratios. Our studies indicate that the MoS2 with more Mo terminated vacancies exhibits better hydrogen evolution reaction (HER) performance than MoS2 with S terminated vacancies and defect-free MoS2. The improved performance originates from the adjustable orbital orientation and distribution, which is beneficial for regulating H adsorption and eventually boosting the intrinsic per-site activity. This work uncovers the underlying essence of the local atomic environment of vacancies on catalysis and provides a significant extension of defect engineering for the rational design of transition metal dichalcogenides (TMDs) catalysts and beyond.

Ultrafine Ru nanoparticles stabilized by V8C7/C for enhanced hydrogen evolution reaction at all pH

The development of cost-effective electrocatalysts with high efficiency and long durability for hydrogen evolution reaction (HER) remains a great challenge in the field of water splitting. Herein, we design an ultrafine and highly dispersed Ru nanoparticles stabilized on porous V8C7/C matrix via pyrolysis of the metal-organic frameworks V-BDC (BDC: 1,4-benzenedicarboxylate). The obtained Ru-V8C7/C composite exhibits excellent HER performance in all pH ranges. At the overpotential of 40 mV, its mass activity is about 1.9, 4.1 and 9.4 times higher than that of commercial Pt/C in acidic, neutral and alkaline media, respectively. Meanwhile, Ru-V8C7/C shows the remarkably high stability in all pH ranges which, in particular, can maintain the current density of 10 mA cm-2 for over 150 h in 1.0 mol L-1 phosphate buffer saline (PBS). This outstanding HER performance can be attributed to the high intrinsic activity of Ru species and their strong interface interactions to the V8C7/C substrate. The synergistic effect of abundant active sites on the surface and the formed Ru-C-V units at the interface promotes the adsorption of reaction intermediates and the release of active sites, contributing the fast HER kinetics. This work provides a reference for developing versatile and robust HER catalysts by surface and interface regulation for pH tolerance.

Zeolite-templated carbon-supported Ru-based catalysts for efficient alkaline hydrogen evolution reaction

Herein, a series of Ru/ZTCs samples were prepared using LaY zeolite-templated carbon as a support. Characterizations showed that the unique structure of the ZTCs and the chemical state of Ru facilitated superior HER performance compared to other carbon-supported samples. This work offers a new strategy for designing excellent electrocatalysts.

Tuning Mass Transport in Electrocatalysis Down to Sub-5 nm through Nanoscale Grade Separation

Nano and single-atom catalysis open new possibilities of producing green hydrogen (H₂ ) by water electrolysis. However, for the hydrogen evolution reaction (HER) which occurs at a characteristic reaction rate proportional to the potential, the fast generation of H₂ nanobubbles at atomic-scale interfaces often leads to the blockage of active sites. Herein, a nanoscale grade-separation strategy is proposed to tackle mass-transport problem by utilizing ordered three-dimensional (3d) interconnected sub-5 nm pores. The results reveal that 3d criss-crossing mesopores with grade separation allow efficient diffusion of H₂ bubbles along the interconnected channels. After the support of ultrafine ruthenium (Ru), the 3d mesopores are on a superior level to two-dimensional system at maximizing the catalyst performance and the obtained Ru catalyst outperforms most of the other HER catalysts. This work provides a potential route to fine-tuning few-nanometer mass transport during water electrolysis.

Emerging Heterogeneous Supports for Efficient Electrocatalysis

Electrocatalysis plays a fundamental role in many fields, such as metallurgy, medicine, chemical industry, and energy conversion. Anchoring active electrocatalysts with controllable loading and uniform dispersion onto suitable supports has become an attractive topic. This is because the supports can not only have the potential to improve catalytic activity and stability through the interaction between support and catalytic center, but also can reduce precious metal consumption by improving atomic utilization. Herein, recent theoretical and experimental progresses concerning the development of supports to anchor electrocatalytic materials are first reviewed. Next, their controllable syntheses, characterization techniques, metal-support electronic interactions, and structure-performance relationships are presented. Some representative carbon supports and non-carbonaceous supports, as well as recently reported star supports such as 2D supports, single atom catalysts, and self-supported catalysts are also summarized. In addition, the significant role of support in stabilizing and regulating catalytic active sites is particularly emphasized. Finally, challenges, opportunities, key problems, and further promising solutions for supported catalysts are proposed.

Ni-Doped Ordered Nanoporous Carbon Prepared from Chestnut Wood Tannins for the Removal and Photocatalytic Degradation of Methylene Blue

In this work, Ni-doped ordered nanoporous carbon was prepared by a simple and green one-pot solvent evaporation induced self-assembly process, where chestnut wood tannins were used as a precursor, Pluronic^® F-127 as a soft template, and Ni²⁺ as a crosslinking agent and catalytic component. The prepared carbon exhibited a 2D hexagonally ordered nanorod array mesoporous structure with an average pore diameter of ~5 nm. Nickel was found to be present on the surface of nanoporous carbon in the form of nickel oxide, nickel hydroxide, and metallic nickel. Nickel nanoparticles, with an average size of 13.1 nm, were well dispersed on the carbon surface. The synthesized carbon was then tested for the removal of methylene blue under different conditions. It was found that the amount of methylene blue removed increased with increasing pH and concentration of carbon but decreased with increasing concentration of methylene blue. Furthermore, photocatalytic tests carried out under visible light illumination showed that purple light had the greatest effect on the methylene blue adsorption/degradation, with the maximum percent degradation achieved at ~4 h illumination time, and that the percent degradation at lower concentrations of methylene blue was much higher than that at higher concentrations. The adsorption/degradation process exhibited pseudo second-order kinetics and strong initial adsorption, and the prepared carbon showed high magnetic properties and good recyclability.

Confined Co9S8 nanocrystals into N/S-Co-doped carbon nanofibers as a chainmail-like electrocatalyst for high-performance lithium-sulfur batteries with high sulfur loading

Accelerating phase transposition efficiency of lithium polysulfides (LiPSs) to L₂S and hampering the solution of LiPSs are the keys to stabilizing lithium-sulfur (Li-S) batteries. Hence, the sulfiphilic ultrafine Co₉S₈ nanoparticles embedded lithiophilic N, S co-doping carbon nanofibers (Co₉S₈/NSCNF) are prepared via the dual-template method, which are then used as sulfur host in Li-S batteries. Particularly, the double active sites (Co₉S₈ and N, S) in Co₉S₈/NSCNF are prone to form "Co-S", "Li-O" or "Li-N" bonds, and then simultaneously improving the chemisorption and interface transposition capability of LiPSs. In case of the S@ Co₉S₈/NSCNF composites with high sulfur loading of 89% are employed as cathode, the cell possesses optimized "sulfiphilicity" and "lithiophilicity", which achieves remarkable sulfur electrochemistry, including outstanding reversibility of 816.8mAhg^-1 over 500 cycles at 1.0C, excellent rate property of 742.2mAhg^-1at 5.0C, and long-term cycling with a low attenuation of 0.011% per cycle over 1800 cycles at 3.0C. Impressively, a remarkable areal capacity of 11.51mAhcm^-2 is retained under the sulfur loading of 15.3 mg cm^-2 for 50 cycles. This research will deepen the understanding of the complex LiPSs interface transposition procedure and provide new ideas for the design of new host materials.

Porous nanographene formation on γ-alumina nanoparticles via transition-metal-free methane activation

γ-Al₂O₃ nanoparticles promote pyrolytic carbon deposition of CH₄ at temperatures higher than 800 °C to give single-walled nanoporous graphene (NPG) materials without the need for transition metals as reaction centers. To accelerate the development of efficient reactions for NPG synthesis, we have investigated early-stage CH₄ activation for NPG formation on γ-Al₂O₃ nanoparticles via reaction kinetics and surface analysis. The formation of NPG was promoted at oxygen vacancies on (100) surfaces of γ-Al₂O₃ nanoparticles following surface activation by CH₄. The kinetic analysis was well corroborated by a computational study using density functional theory. Surface defects generated as a result of surface activation by CH₄ make it kinetically feasible to obtain single-layered NPG, demonstrating the importance of precise control of oxygen vacancies for carbon growth.

Oxygen vacancies on the (100) surface of γ-Al₂O₃ nanoparticles catalyse CH₄-CVD for single-layered nanoporous graphenes with no transition metal reaction centre. The rate-limiting step is the proton transfer (PT) in the activation of CH₄ on them.

Additive Manufacturing of Two-Dimensional Conductive Metal-Organic Framework with Multidimensional Hybrid Architectures for High-Performance Energy Storage

Two-dimensional conductive metal-organic frameworks (2D CMOFs) can be regarded as high-performance electrode substances owing to their rich hierarchical porous architecture and excellent electrical conductivity. However, the sluggish kinetics behavior of electrodes within the bulk structure restricts their advances in energy storage fields. Herein, a series of graphene-based mixed-dimensional composite aerogels are achieved by incorporating the 2D M-tetrahydroxy-1,4-quinone (M-THQ) (M = Cu, Cu/Co, or Cu/Ni) into CNTs@rGO aerogel electrodes using a 3D-printing direct ink writing (DIW) technique. Benefiting from the high capacity of M-THQ and abundant porosity of the 3D-printed microlattice electrodes, an excellent capacitive performance of the M-THQ@CNTs@rGO cathodes is achieved based on the fast electron/ion transport. Furthermore, the 3D-printed lithium-ion hybrid supercapacitor (LIHCs) device assembled with Cu/Co-THQ@CNTs@rGO cathode and C60@VNNWs@rGO anode delivers a remarkable electrochemical performance. More importantly, this work manifests the practicability of printing 2D CMOFs electrodes, which provides a substantial research basis for 3D printing energy storage.

A Review of Preparation Strategies for α-MoC1-x Catalysts

Transition metal carbides are attracting growing attention as robust and affordable alternative heterogeneous catalysts to platinum group metals, for a host of contemporary and established hydrogenation, dehydrogenation, and isomerisation reactions. In particular, the metastable α-MoC1-x phase has been shown to exhibit interesting catalytic properties for low temperature processes reliant on O-H and C-H bond activation. While demonstrating exciting catalytic properties, a significant challenge exists in the application of metastable carbides, namely the challenging procedure for their preparation. In this review we will briefly discuss the properties and catalytic applications of α-MoC1-x, followed by a more detailed discussion on available synthesis methods and important parameters that influence carbide properties. Techniques are contrasted with properties of phase, surface area, morphology and Mo:C being considered. Further, we briefly relate these observations to experimental and theoretical studies of α-MoC1-x in catalytic applications. Synthetic strategies discussed are, the original temperature programmed ammonolysis followed by carburisation, alternative oxycarbide or hydrogen bronze precursor phases, heat treatment of moybdate-amide compounds and other low temperature synthetic routes. The importance of carbon removal and catalyst passivation in relation to surface and bulk properties are also discussed. Novel techniques that by-pass the apparent bottle neck of ammonolysis are reported, however a clear understanding of intermediate phases is required to be able to fully apply these techniques. Pragmatically, the scaled application of these techniques requires the pre-pyrolysis wet chemistry to be simple and scalable. Further, there is a clear opportunity to correlate observed morphologies/phases and catalytic properties with findings from computational theoretical studies. Detailed characterisation throughout the synthetic process is essential and will undoubtedly provide fundamental insights that can be used for the controllable and scalable synthesis of metastable α-MoC1-x.