Tuning Photoinduced Electron Transfer in POM-Bodipy Hybrids by Controlling the Environment: Experiment and Theory

Multi-Emission Carbon Dots Combining Turn-On Sensing and Fluorescence Quenching Exhibit Ultrahigh Selectivity for Mercury in Real Water Samples

Mercury is a ubiquitous heavy-metal pollutant and poses serious ecological and human-health risks. There is an ever-growing demand for rapid, sensitive, and selective detection of mercury in natural waters, particularly for regions lacking infrastructure specialized for mercury analysis. Here, we show that a sensor based on multi-emission carbon dots (M-CDs) exhibits ultrahigh sensing selectivity toward Hg(II) in complex environmental matrices, tested in the presence of a range of environmentally relevant metal/metalloid ions as well as natural and artificial ligands, using various real water samples. By incorporating structural features of calcein and folic acid that enable tunable emissions, the M-CDs couple an emission enhancement at 432 nm and a simultaneous reduction at 521 nm, with the intensity ratio linearly related to the Hg(II) concentration up to 1200 μg/L, independent of matrix compositions. The M-CDs have a detection limit of 5.6 μg/L, a response time of 1 min, and a spike recovery of 94 ± 3.7%. The intensified emission is attributed to proton transfer and aggregation-induced emission enhancement, whereas the quenching is due to proton and electron transfer. These findings also have important implications for mercury identification in other complex matrices for routine, screening-level food safety and health management practices.

Electrocatalytic Reduction of Dinitrogen to Ammonia with Water as Proton and Electron Donor Catalyzed by a Combination of a Tri-ironoxotungstate and an Alkali Metal Cation

The electrification of ammonia synthesis is a key target for its decentralization and lowering impact on atmospheric CO2 concentrations. The lithium metal electrochemical reduction of nitrogen to ammonia using alcohols as proton/electron donors is an important advance, but requires rather negative potentials, and anhydrous conditions. Organometallic electrocatalysts using redox mediators have also been reported. Water as a proton and electron donor has not been demonstrated in these reactions. Here a N2 to NH3 electrocatalytic reduction using an inorganic molecular catalyst, a tri-iron substituted polyoxotungstate, {SiFe3W9}, is presented. The catalyst requires the presence of Li+ or Na+ cations as promoters through their binding to {SiFe3W9}. Experimental NMR, CV and UV-vis measurements, and MD simulations and DFT calculations show that the alkali metal cation enables the decrease of the redox potential of {SiFe3W9} allowing the activation of N2. Controlled potential electrolysis with highly purified 14N2 and 15N2 ruled out formation of NH3 from contaminants. Importantly, using Na+ cations and polyethylene glycol as solvent, the anodic oxidation of water can be used as a proton and electron donor for the formation of NH3. In an undivided cell electrolyzer under 1 bar N2, rates of NH3 formation of 1.15 nmol sec-1 cm-2, faradaic efficiencies of ∼25%, 5.1 equiv of NH3 per equivalent of {SiFe3W9} in 10 h, and a TOF of 64 s-1 were obtained. The future development of suitable high surface area cathodes and well solubilized N2 and the use of H2O as the reducing agent are important keys to the future deployment of an electrocatalytic ammonia synthesis.

Multi-Electron Visible Light Photoaccumulation on a Dipyridylamine Copper(II)-Polyoxometalate Conjugate Applied to Photocatalytic Generation of CF3 Radicals

This article describes the synthesis and characterization of an organic-inorganic hybrid polyoxometalate functionalized by a short link with a tripodal N-based ligand and its copper complex. Upon visible light irradiation, the latter is able to store up to three reducing equivalents. The locus of the reduction is discussed based on physicochemical measurements and DFT calculations. In the presence of Togni's reagent, this complex allows for the photocatalytic generation of CF₃ radicals, opening the road to valuable synthetic applications.

Hybrid Molecular Magnets with Lanthanide- and Countercation-Mediated Interfacial Electron Transfer between Phthalocyanine and Polyoxovanadate

A series of {V₁₂}-nuclearity polyoxovanadate cages covalently functionalized with one or sandwiched by two phthalocyaninato (Pc) lanthanide (Ln) moieties via V-O-Ln bonds were prepared and fully characterized for paramagnetic Ln = Sm^III-Er^III and diamagnetic Ln = Lu^III, including Y^III. The LnPc-functionalized {V₁₂O₃₂} cages with fully oxidized vanadium centers in the ground state were isolated as (nBu₄N)₃[HV₁₂O₃₂Cl(LnPc)] and (nBu₄N)₂[HV₁₂O₃₂Cl(LnPc)₂] compounds. As corroborated by a combined experimental (EPR, DC and AC SQUID, laser photolysis transient absorption spectroscopy, and electrochemistry) and computational (DFT, MD, and model Hamiltonian approach) methods, the compounds feature intra- and intermolecular electron transfer that is responsible for a partial reduction at V(3d) centers from V^V to V^IV in the solid state and at high sample concentrations. The effects are generally Ln dependent and are clearly demonstrated for the (nBu₄N)₃[HV₁₂O₃₂Cl(LnPc)] representative with Ln = Lu^III or Dy^III. Intramolecular charge transfer takes place for Ln = Lu^III and occurs from a Pc ligand via the Ln center to the {V₁₂O₃₂} core of the same molecule, whereas for Ln = Dy^III, only intermolecular charge transfer is allowed, which is realized from Pc in one molecule to the {V₁₂O₃₂} core of another molecule usually via the nBu₄N⁺ countercation. For all Ln but Dy^III, two of these phenomena may be present in different proportions. Besides, it is demonstrated that (nBu₄N)₃[HV₁₂O₃₂Cl(DyPc)] is a field-induced single molecule magnet with a maximal relaxation time of the order 10^-3 s. The obtained results open up the way to further exploration and fine-tuning of these three modular molecular nanocomposites regarding tailoring and control of their Ln-dependent charge-separated states (induced by intramolecular transfer) and relaxation dynamics as well as of electron hopping between molecules. This should enable us to realize ultra-sensitive polyoxometalate powered quasi-superconductors, sensors, and data storage/processing materials for quantum technologies and neuromorphic computing.

All-Visible (>500 nm)-Light-Induced Diarylethene Photochromism Based on Multiplicity Conversion via Intramolecular Energy Transfer

Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-¹[PBI]* → ³[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.

Guided Synthesis of a Mo/Zn Dual Single-Atom Nanozyme with Synergistic Effect and Peroxidase-like Activity

We present a facile route towards a dual single-atom nanozyme composed of Zn and Mo, which utilizes the non-covalent nano-assembly of polyoxometalates, supramolecular coordination complexes as the metal-atom precursor, and a macroscopic amphiphilic aerogel as the supporting substrate. The dual single-atoms of Zn and Mo have a high content (1.5 and 7.3 wt%, respectively) and exhibit a synergistic effect and a peroxidase-like activity. The Zn/Mo site was identified as the main active center by X-ray absorption fine structure spectroscopy and density functional theory calculation. The detection of versatile analytes, including intracellular H₂ O₂ , glucose in serum, cholesterol, and ascorbic acid in commercial beverages was achieved. The nanozyme has an outstanding stability and maintained its performance after one year's storage. This study develops a new peroxidase-like nanozyme and provides a robust synthetic strategy for single-atom catalysts by utilizing an aerogel as a facile substrate that is capable of stabilizing various metal atoms.

Tuning the Physicochemical Properties of BODIPY for Bioimaging via meso-Amino Acylation

A series of BODIPY probes with a wide emission range were prepared via aminoacylation at the meso-position. Functional moieties were also introduced to induce bathochromic shifts in emission, improve water solubility, increase Stokes shifts, and construct bioorthogonal turn-on probes. The developed analogues were successfully used in live-cell imaging, suggesting that the described strategy can be used to prepare probes with improved bioimaging potential.

A photosensitizer-polyoxometalate dyad that enables the decoupling of light and dark reactions for delayed on-demand solar hydrogen production

Decoupling the production of solar hydrogen from the diurnal cycle is a key challenge in solar energy conversion, the success of which could lead to sustainable energy schemes capable of delivering H₂ independent of the time of day. Here, we report a fully integrated photochemical molecular dyad composed of a ruthenium-complex photosensitizer covalently linked to a Dawson polyoxometalate that acts as an electron-storage site and hydrogen-evolving catalyst. Visible-light irradiation of the system in solution leads to charge separation and electron storage on the polyoxometalate, effectively resulting in a liquid fuel. In contrast to related, earlier dyads, this system enables the harvesting, storage and delayed release of solar energy. On-demand hydrogen release is possible by adding a proton donor to the dyad solution. The system is a minimal molecular model for artificial photosynthesis and enables the spatial and temporal separation of light absorption, fuel storage and hydrogen release.

Supramolecular assemblies of organo-functionalised hybrid polyoxometalates: from functional building blocks to hierarchical nanomaterials

This review provides a comprehensive overview of recent advances in the supramolecular organisation and hierarchical self-assembly of organo-functionalised hybrid polyoxometalates (hereafter referred to as hybrid POMs), and their emerging role as multi-functional building blocks in the construction of new nanomaterials. Polyoxometalates have long been studied as a fascinating outgrowth of traditional metal-oxide chemistry, where the unusual position they occupy between individual metal oxoanions and solid-state bulk oxides imbues them with a range of attractive properties (e.g. solubility, high structural modularity and tuneable properties/reactivity). Specifically, the capacity for POMs to be covalently coupled to an effectively limitless range of organic moieties has opened exciting new avenues in their rational design, while the combination of distinct organic and inorganic components facilitates the formation of complex molecular architectures and the emergence of new, unique functionalities. Here, we present a detailed discussion of the design opportunities afforded by hybrid POMs, where fine control over their size, topology and their covalent and non-covalent interactions with a range of other species and/or substrates makes them ideal building blocks in the assembly of a broad range of supramolecular hybrid nanomaterials. We review both direct self-assembly approaches (encompassing both solution and solid-state approaches) and the non-covalent interactions of hybrid POMs with a range of suitable substrates (including cavitands, carbon nanotubes and biological systems), while giving key consideration to the underlying driving forces in each case. Ultimately, this review aims to demonstrate the enormous potential that the rational assembly of hybrid POM clusters shows for the development of next-generation nanomaterials with applications in areas as diverse as catalysis, energy-storage and molecular biology, while providing our perspective on where the next major developments in the field may emerge.

Tailoring the Solid-State Fluorescence of BODIPY by Supramolecular Assembly with Polyoxometalates

A cationic boron dipyrromethene (BODIPY) derivative (1⁺) has been successfully combined with two polyoxometalates (POMs), the Lindqvist-type [W₆O₁₉]^2- and the β-[Mo₈O₂₆]^4- units, into three new supramolecular fluorescent materials (1)₂[W₆O₁₉]·2CH₃CN, (1)₂[W₆O₁₉], and (1)₄[Mo₈O₂₆]·DMF·H₂O. The resulting hybrid compounds have been fully characterized by a combination of single-crystal X-ray diffraction, IR and UV-vis spectroscopies, and photoluminescence analyses. This self-assembly approach prevents any π-π stacking interactions not only between the BODIPY units, responsible for aggregation-caused quenching (ACQ) effects, but also between the BODIPY and the POMs, avoiding intermolecular charge-transfer effects. Noticeably, the POM units do not only act as bulky spacers, but their negative charge density drives the molecular arrangement of the 1⁺ luminophore, strongly modifying its fluorescence in the solid state. As a consequence, the 1⁺ cations are organized into dimers in (1)₂[W₆O₁₉]·2CH₃CN and (1)₂[W₆O₁₉], which are weakly emissive at room temperature, and in a more compact layered assembly in (1)₄[Mo₈O₂₆]·DMF·H₂O, which exhibits a red-shifted and intense emission upon similar photoexcitation.

Acid-triggering of light-induced charge-separation in hybrid organic/inorganic molecular photoactive dyads for harnessing solar energy

H⁺ modulated charge-transfer in photoexcited covalently linked W and Mo Keggin-bodipy conjugates is demonstrated using transient absorption spectroscopy and photoluminescence. Adding acid switches on (W) or accelerates (Mo) charge separation.