Biomimetic Parallel Vein-like Two-Dimensional Supramolecular Layers Containing Embedded One-Dimensional Conduits Driven by Cation-π Interaction and Hydrogen Bonding to Promote Photocatalytic Hydrogen Evolution

Two-dimensional supramolecular assemblies (2DSAs) with well-defined nanostructures have emerged as promising candidates for diverse applications, particularly in photocatalysis. However, it still remains a significant challenge to simultaneously achieve effective electron transport and multiple active sites in 2DSA, even though this is crucial for enhancing photocatalytic performance. This reason can be attributed to the lack of a suitable structural paradigm that enables both effective intermolecular orbital overlap and increased substrate contact. Inspired by the parallel venation of monocotyledons that can facilitate substrate transfer, we overcome the limitation, in this study, by integrating parallel-arranged one-dimensional (1D) conduits with edge-on packing motifs to construct biomimetic, parallel vein-like two-dimensional supramolecular layers (PV-2DSLs) through the hierarchical self-assembly of cationically modified, rigid multiarmed monomers. The resulting PV-2DSLs exhibit a long-range aromatic cation-π stacking that can facilitate electron transport. Importantly, the unique structural feature of these PV-2DSLs is the orderly and parallel embedding of 1D conduits within the 2D plane, which is significantly different from the conventional channels formed by the vertical stacking of 2D porous materials. These conduits promote multielectron transfer pathways, leading to enhanced charge separation and carrier transport when coupled with long-range aromatic cation-π stacking. As a consequence, these PV-2DSLs exhibit long excited state lifetime, leading to significantly improved hydrogen production rates up to 3.5 mmol g-1 h-1, which is approximately 17.5 times higher than that of the counterpart without 1D conduits (0.2 mmol g-1 h-1).

Efficient Methane Purification Using a Robust and Recoverable Hydrogen-Bonded Organic Framework

Efficient separation and purification of methane is a key step in promoting its wide application as an environmentally friendly energy carrier and an important chemical raw material. Development of single solid adsorbents simultaneously combining robust structure, high separation capacity, and easy performance recovery is highly desired but quite a challenge for realizing methane depuration. In the present study, we report an ultramicroporous hydrogen-bonded organic framework compound constructed from a tetracyano bithiophene-functionalized ligand. Similar to the acting principle of enzymes, multisite supramolecular interactions endow the material with not only extraordinary chemical stability in wide pH range including 12 M HCl and 20 M NaOH solutions but also highly selective recognition of acetylene and carbon dioxide over methane. The packing densities and adsorption selectivities toward acetylene and carbon dioxide are the highest reported for the hydrogen-bonded organic framework materials. Dynamic breakthrough experiments demonstrate its highly efficient methane purification ability from binary and even ternary mixed gases, with not only methane productivities up to 2.34 mol kg-1 but also moderate regeneration energy. Furthermore, the title compound can be easily regenerated in almost quantitative yield via simple rato-evaporation of its dichloromethane solution once its activity is attenuated or lost.

Hierarchical chirality conversion switched by biaxial halogen bonding

Precise control over chirality across hierarchical levels of peptides enriches the toolbox of peptide-based chiroptical materials. In this work, we report a controlled conversion from folded molecular chirality to supramolecular chirality, which can be effectively switched by biaxial halogen bonds. Amino acid segments were conjugated to the bipyridine core as a β-turn to facilitate the formation of parallel β-sheet arrays, which enables intramolecular chirality transfer to the appended pyrenes. This allows for efficient excimer emission and boosted circularly polarized luminescence with a dissymmetry factor of up to 10-2. The folding structures are self-assembled into nanohelices where supramolecular chirality is dominated by emerged heterochirality in response to the solvent medium. The introduction of hypervalent iodine(iii) species binds to the peptide via strong biaxial I⋯N halogen bonds that transform well-ordered helices into amorphous nanoparticles. The biaxial halogen bonding complexation rearranges the assembly with extremely high efficacy, suppressing the supramolecular chirality and recovering the folded molecular chirality, when the chiroptical activities are rationally manipulated. This work unveils the dynamic conversion of artificially folded peptides, which will inspire the design of protocols for peptide- or protein-based chiroptical materials.

Solid-State Photoconversion of a Discrete Mixed Iodine(I) System to a 1D Polymer

The first example of a mixed halogen(I) complex (2), containing three distinct iodine(I) moieties ([N-I-N]+, O-I-N, and [O-I-O]-) within the same structure, was synthesized with 4-styrylpyridine (4-stypy) and 3,4,5,6-tetrafluorophthalate as the stabilizing Lewis bases. This complex was observed to be in equilibrium with its respective bis(OIN) complex (1a), with isolated samples of 2 also being found to convert to 1a in solution. Upon UV irradiation of 2, a single-crystal-to-single-crystal [2 + 2] cycloaddition reaction was observed, converting the discrete salt 2 to the 1D polymer 5. Complex 5 retained all the iodine(I) moieties from prior to photoconversion and represents the first example of nondestructive photoconversion of a halogen(I) complex. To facilitate comparisons to 2 and 5, several additional closely related iodine(I) complexes were synthesized, with the iodine(I) complexes characterized by NMR (1H, 1H-15N HMBC) and SCXRD, as well as by Raman and IR spectroscopy for 2, 5, and their close structural analogue 1a.

Charge-transfer Adducts vs Iodine(I) Complexes: Dual Role of Halogen Bonding in Reactions of Diiodine with N-donor Bases

The interaction of diiodine with quinuclidine (QN) and 4-dimethylaminopyridine (DMAP) in solutions with 1 : 1 molar ratio of reactants at room temperature produced (in essentially quantitative yields) pure charge-transfer QN⋅I2 adducts and iodine(I) salt [DMAP-I-DMAP]I3, respectively. In comparison, the quantitative formation of pure iodine (I) salt [QN-I-QN]I5 was observed for the room-temperature reactions of QN with a 50 % excess of I2, and the charge-transfer adducts of I2 with DMAP (and other pyridines) were formed when reactions were carried out at low temperatures. Computational analysis related the switch from the formation of charge-transfer adducts to iodine(I) complexes in these systems to the strength of the halogen bonding of diiodine to the N-donor bases. It shows that while the halogen-bonded adducts represent critical intermediates in the formation of iodine(I) complexes, exceedingly strong halogen bonding between diiodine and the base prevents any subsequent transformations. In other words, while halogen bonding usually facilitates electron and halogen transfer, the halogen-bonded complexes may serve as "black holes" hindering any follow-up processes if this intermolecular interaction is too strong.

Porous Halogen-Bonded Frameworks Assembled through Hetero-polytopic Ion Pair Templation

Halogen-bonding (XB) interactions have been extensively studied in the preparation of crystalline frameworks, yet porous 3D framework materials built on XBs remain elusive. The donor-acceptor interactions are strengthened by use of anionic XB acceptors; however, the requisite charge-balancing cations typically disrupt the framework and occupy potential void space. In this work, we prepare a tetratopic XB donor bearing a crown ether moiety for sodium cation sequestration. We show that when this ionpair receptor is crystallised with NaCl it gives a 3D framework that is porous to solvent and vapour, and undergoes single-crystal-to-single-crystal reactions.

Selective Self-Assembly of Supramolecular Helices and Macrocycles Directed by Halogen Bonding

In this study, several hydrogen-bonded arylamide foldamers (compounds 1-5) with the same degree of polymerization were designed and synthesized. The polyfluoroiodobenzene or iodoethynyl polyfluoroiodobenzene segment was modified as a halogen donor at the end of the monomer, and pyridine or pyridine oxynitride served as the corresponding halogen acceptor segment. The crystal structure of compound 1 indicates that the supramolecular double helices were constructed by stacking a P helix and an M helix in an antiparallel manner in the direction of intermolecular I⋅⋅⋅-O-N+ halogen bonding. The zig-zag-shaped linear structures of compounds 2 and 3 were generated under the induction of intermolecular I⋅⋅⋅N and I⋅⋅⋅-O-N+ halogen bonds. [1+1] near-planar bimolecular supramolecular macrocycles in compounds 4 and 5 were formed by multiple groups of effective intramolecular three-center hydrogen bonding and strong I⋅⋅⋅N and I⋅⋅⋅-O-N+ halogen bonds. Hirshfeld surface analysis and theoretical modelling of the halogen bonding energy were performed. The noncovalent interactions on the surface of the monomers and the halogen bonding energy were investigated in detail.

Tuning of a Hydrogen-Bonded Organic Framework by Liquid-Assisted Mechanosynthesis between Trans-Aconitic Acid and Isonicotinamide

Cocrystallization of trans-aconitic acid (TACA) and isonicotinamide (INA) using liquid assisted mechanochemical grinding results in a unique supramolecular hydrogen-bonded organic framework (HOF) system encapsulating various organic solvents (liquid guest) with the formation of channel inclusion compounds. Dimension and shape of the framework is dependent on the solvent used during liquid assisted grinding (LAG). Although crystal structure of the cocrystal (TACA) ⋅ (INA)2 ⋅ (H2O)@(INA)0.5 has been determined by Single Crystal X-ray diffraction (SCXRD), crystal structures of 3 cocrystal HOFs were determined by microcrystal electron diffraction (MicroED) and synchrotron X-ray diffraction due to lack of suitable single crystal. PXRD analysis confirms isostructurality of various host-guest systems; whereas guest incorporation as well as stability of the HOFs were further confirmed using thermogravimetric analysis. This study demonstrates that the framework of HOFs can be tuned by varying solvent molecules used during LAG.

Triphenylphosphine Oxide: A Versatile Covalent Functionality for Carbon Nanotubes

Broadening the scope of functionalities that can be covalently bound to single-walled carbon nanotubes (SWCNTs) is crucial for enhancing the versatility of this promising nanomaterial class in applied settings. Here we report the covalent linkage of triphenylphosphine oxide [Ph3P(O)] to SWCNTs, a hitherto overlooked surface functionality. We detail the synthesis and structural characterization of a new family of phosphine oxide-functionalized diaryliodonium salts that can facilitate direct Ph3P(O) transfer and afford novel SWCNTs with tunable Ph3P(O) content (SWCNT-P). The molecularly-distributed and robust nature of the covalent Ph3P(O) attachment in SWCNT-P was supported by a combination of characterization methods including Raman, infrared, UV/Vis-NIR and X-ray photoelectron spectroscopies coupled with thermogravimetric analysis. Electron microscopy further revealed the effectiveness of the Ph3P(O) moiety for de-bundling SWCNTs to yield SWCNT-P with superior dispersibility and processability. Finally, electrochemical studies established that SWCNT-P is sensitive to the presence of Li+, Na+ and K+ wherein the Gutmann-Beckett Lewis acidity parameters of the ions were quantitatively transduced by Ph3P(O) to electrochemical responses. This work hence presents a synthetic, structural, spectroscopic and electrochemical foundation for a new phosphorus-enriched responsive nanomaterial platform featuring the Ph3P(O) functionality.

Halogen Bond Unlocks Ultra-High Birefringence

Anisotropy is crucial for birefringence (Δn) in optical materials, but optimizing it remains a formidable challenge (Δn >0.3). Supramolecular frameworks incorporating π-conjugated components are promising for achieving enhanced birefringence because of their structural diversity and inherent anisotropy. Herein, we first synthesized (C6H6NO2)+Cl- (NAC) and then constructed a halogen-bonded supramolecular framework I+(C6H4NO2)- (INA) by halogen aliovalent substitution of Cl- with I+. The organic moieties are protonated and deprotonated nicotinic acid (NA), respectively. The antiparallel arrangement of birefringent-active units in NAC and INA leads to significant differences in the bonding characteristics between the interlayer and intralayer domains. Moreover, the [O⋅⋅⋅I+⋅⋅⋅N] halogen bond in 1D [I+(C6H4NO2)-] chain exhibits stronger interactions and stricter directionality, resulting in a more pronounced in-plane anisotropy between the intrachain and interchain directions. Consequently, INA exhibits exceptional birefringent performance, with a value of 0.778 at 550 nm, twice that of NAC (0.363 at 550 nm). This value significantly exceeds those of commercial birefringent crystals, such as CaCO3 (0.172 at 546 nm), and is the highest reported value among ultraviolet birefringent crystals. This work presents a novel design strategy that employs halogen bonds as connection sites and modes for birefringent-active units, opening new avenues for developing high-performance birefringent crystals.

Halogen-Bonded Organic Frameworks (XOFs) Based on N⋅⋅⋅Br+⋅⋅⋅N Bonds: Robust Organic Networks Constructed by Fragile Bonds

Organic frameworks face a trade-off between the framework stability and the bond dynamics, which necessitates the development of innovative linkages that can generate stable frameworks without hindering efficient synthesis. Although iodine(I)-based halogen-bonded organic frameworks (XOFs) have been developed, constructing XOFs based on bromine(I) is desirable yet challenging due to the high sensitivity of bromine(I) species. In this work, we present the inaugural construction of stable bromine(I)-bridged two-dimensional (2D) halogen-bonded organic frameworks, XOF(Br)-TPy-BF4/OTf, based on sensitive [N⋅⋅⋅Br⋅⋅⋅N]+ halogen bonds. The formation of XOF(Br)-TPy-BF4/OTf was monitored by 1H NMR, XPS, IR, SEM, TEM, HR-TEM, SEAD. Their framework structures were established by the results from PXRD, theoretical simulations and SAXS. More importantly, XOF(Br) displayed excellent chemical and thermal stabilities. They exhibited stable two-dimensional framework structures in various organic solvents and aqueous media, even over a wide pH range (pH 3-12), while the corresponding model compounds BrPy2BF4/OTf decomposed quickly even in the presence of minimal water. Furthermore, the influence of the counterions were investigated by replacing BF4 with OTf, which improved the stability of XOF(Br). This characteristic enabled XOF(Br) to serve as an efficient oxidizing reagent in aqueous environments, in contrast with the sensitivity of BrPy2BF4/OTf, which performed well only in organic media. This study not only deepens our fundamental understanding of organic frameworks but also opens new avenues for the development and application of multifunctional XOFs.

The Geometry and Nature of C─I···O─N Interactions in Perfluoroiodobenzene-Pyridine N-oxide Halogen-Bonded Complexes

The N─Oxide oxygen in the 111 C─I···⁻O─N+ halogen bond (XB) complexes, formed by five perfluoroiodobenzene XB donors and 32 pyridine N-oxides (PyNO) XB acceptors, exhibits three XB modes: bidentate, tridentate, and monodentate. Their C─I···O XB angles range from 148° to 180°, reflecting the iodine σ-hole's structure-guiding influence. The I···⁻O─N+ angles range from 87° to 152°. On the contrary, the I···⁻O─N+ angles have a narrower range from 107° to 125° in stronger monodentate N─I···⁻O─N+ XBs of N-iodoimides and PyNOs. The C─I···⁻O─N+ systems exhibit a larger variation in I···⁻O─N+ angles due to weaker XB donor perfluoroiodoaromatics forming weak I···O XBs, which allows wider access to electron-rich N-O group regions. Density Functional Theory analysis shows that I···O interactions are attractive even when the I···⁻O─N+ angle is ≈80°. Correlation analysis of structural parameters showed that weak I···O XBs in perfluoroiodobenzene-PyNO complexes affect the C─I bond via n(O)→σ*(C─I) donation less than the N─I bond via n(O)→σ*(N─I) donation in very strong I···O XBs of N-iodoimide-PyNO complexes. This implies that PyNOs' oxygen self-tunes its XB acceptor property, dependent on the XB donor σ-hole strength affecting the bonding denticity, geometry, and interaction energies.

From Inorganic to Organic Iodine: Stabilization of I+ Enabling High-Energy Lithium-Iodine Battery

Organic materials have been considered a class of promising cathodes for metal-ion batteries because of their sustainability in preparation and source. However, organic batteries with high energy density and application potential require high discharge voltage, multielectron transfer, and long cycling performance. Here, we report an exceptional lithium-iodine (Li//I2) battery, in which the organic iodine (BPD-HI) cathode formed by the Lewis acid-base coordination between hydroiodic acid (HI) and 4,4'-bipyridine (BPD) allows 2e- transfer via the I-/I0 and I0/I+ redox couples. The I+ stabilized by BPD exhibits a high discharge voltage plateau at ∼3.4 V. Remarkably, from inorganic to organic iodine, it realizes a 2-fold increase in the achieved capacity, up to ∼400 mA h gI-1 (Theor. 422 mA h gI-1 and 245.6 mA h g-1 based on the mass of BPD-HI), and an over 2-fold energy density, reaching 1160 W h kgI-1 (Theor. 1324 W h kgI-1). More importantly, a capacity retention rate of 85% over 850 cycles is attained for the Li//BPD-HI battery at a current density of 2 A gI-1. This facile strategy enables positively charged I+ to be electrochemically active in a rechargeable lithium battery. The new redox chemistry discovered provides new insights for developing organic batteries with high energy density.

Hybrid 2D Supramolecular Organic Frameworks (SOFs) Assembled by the Cooperative Action of Hydrogen and Halogen Bonding and π⋯π Stacking Interactions

The cis- and trans-isomers of 6-(3-(3,4-dichlorophenyl)-1,2,4-oxadiazol-5-yl)cyclohex-3-ene-1-carboxylic acid (cis-A and trans-A) were obtained by the reaction of 3,4-dichloro-N'-hydroxybenzimidamide and cis-1,2,3,6-tetrahydrophthalic anhydride. Cocrystals of cis-A with appropriate solvents (cis-A‧½(1,2-DCE), cis-A‧½(1,2-DBE), and cis-A‧½C6H14) were grown from 1,2-dichloroethane (1,2-DCE), 1,2-dibromoethane (1,2-DBE), and a n-hexane/CHCl3 mixture and then characterized by X-ray crystallography. In their structures, cis-A is self-assembled to give a hybrid 2D supramolecular organic framework (SOF) formed by the cooperative action of O-H⋯O hydrogen bonding, Cl⋯O halogen bonding, and π⋯π stacking. The self-assembled cis-A divides the space between the 2D SOF layers into infinite hollow tunnels incorporating solvent molecules. The energy contribution of each noncovalent interaction to the occurrence of the 2D SOF was verified by several theoretical approaches, including MEP and combined QTAIM and NCIplot analyses. The consideration of the theoretical data proved that hydrogen bonding (approx. -15.2 kcal/mol) is the most important interaction, followed by π⋯π stacking (approx. -11.1 kcal/mol); meanwhile, the contribution of halogen bonding (approx. -3.6 kcal/mol) is the smallest among these interactions. The structure of the isomeric compound trans-A does not exhibit a 2D SOF architecture. It is assembled by the combined action of hydrogen bonding and π⋯π stacking, without the involvement of halogen bonds. A comparison of the cis-A structures with that of trans-A indicated that halogen bonding, although it has the lowest energy in cis-A-based cocrystals, plays a significant role in the crystal design of the hybrid 2D SOF. The majority of the reported porous halogen-bonded organic frameworks were assembled via iodine and bromine-based contacts, while chlorine-based systems-which, in our case, are structure-directing-were unknown before this study.

Dioxygen-halogen bonding exemplified by crystalline peroxosolvates of N,N'-bis(haloacetyl) bispidines

The halogen bonding in molecular crystals and supramolecular assemblies has been widely investigated. Special attention is given to the molecular structures capable of simultaneously exhibiting different types of non-covalent interactions, including conventional hydrogen bonds and halogen bonds. This paper systematically analyzes crystalline peroxosolvates of bispidine-based bis-amide derivatives, containing haloacetic acid residues, namely previously reported 1,1'-(1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-iodooethanone) peroxosolvate C13H20I2N2O2·H2O2 (1) and four new crystalline compounds, 1,1'-(1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-bromoethanone) peroxosolvate C13H20Br2N2O2·H2O2 (2), 1,1'-(9-hydroperoxy-9-hydroxy-1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-iodoethanone) peroxosolvate C13H20I2N2O5·0.5H2O2 (3), 1,1'-(9-hydroperoxy-9-hydroxy-1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-bromoethanone) peroxosolvate C13H20Br2N2O5·H2O2 (4), and 1,1'-(9-hydroperoxy-9-hydroxy-1,5-dimethyl-3,7-diazabicyclo[3.3.1]nonane-3,7-diyl)bis(2-chloroethanone) peroxosolvate C13H20Cl2N2O5·H2O2 (5). Compounds 2-5 were synthesized for the first time and their crystal structures were determined by single-crystal X-ray diffractometry (SCXRD). To the best of our knowledge, 3-5 are unprecedented crystalline hydrogen peroxide adducts of organic hydroperoxides (R-OOH). Short intermolecular contacts between halogen and hydroperoxo oxygen atoms were found in 1-3. The halogen bonding of C-I(Br) fragments with dioxygen species in compounds 1-3 as well as in the previously reported cocrystal of diacetone diperoxide with triodotrinitrobenzene (6) was identified through reduced density gradient analysis, Hirshfeld surface analysis, and Bader analysis of crystalline electron density. The interactions were quantified using the electron density topological properties acquired from the periodic DFT calculations and evaluated to lie in the range of 9-19 kJ mol-1. A distinctive spectral feature was revealed for this type of interaction, involving a red shift of the characteristic O-O stretching vibration by about 6 cm-1, which appeared in IR spectra as a narrow low-intensity band in the region 837-872 cm-1.

Ortho-Substituent Effects on Halogen Bond Geometry for N-Haloimide⋯2-Substituted Pyridine Complexes

The nature of (imide)N-X⋯N(pyridine) halogen-bonded complexes formed by six N-haloimides and sixteen 2-substituted pyridines are studied using X-ray crystallography (68 crystal structures), Density Functional Theory (DFT) (86 complexation energies), and NMR spectroscopy (90 association constants). Strong halogen bond (XB) donors such as N-iodosuccinimide form only 1:1 haloimide:pyridine crystalline complexes, but even stronger N-iodosaccharin forms 1:1 haloimide:pyridine and three other distinct complexes. In 1:1 haloimide:pyridine crystalline complexes, the haloimide's N─X bond exhibits an unusual bond bending feature that is larger for stronger N-haloimides. DFT complexation energies (ΔEXB ) for iodoimide-pyridine complexes range from -44 to -99 kJ mol-1 , while for N-bromoimide-pyridine, they are between -31 and -77 kJ mol-1 . The ΔEXB of I⋯N XBs in 1:1 iodosaccharin:pyridine complexes are the largest of their kind, but they are substantially smaller than those in [bis(saccharinato)iodine(I)]pyridinium salts (-576 kJ mol-1 ), formed by N-iodosaccharin and pyridines. The NMR association constants and ΔEXB energies of 1:1 haloimide:pyridine complexes do not correlate as these complexes in solution are heavily influenced by secondary interactions, which DFT studies do not account for. Association constants follow the σ-hole strengths of N-haloimides, which agree with DFT and crystallography data. The haloimide:2-(N,N-dimethylamino)pyridine complex undergoes a halogenation reaction resulting in 5-iodo-2-dimethylaminopyridine.

Integrating Levels of Hierarchical Organization in Porous Organic Molecular Materials

Porous organic molecular materials (POMMs) are an emergent class of molecular-based materials characterized by the formation of extended porous frameworks, mainly held by non-covalent interactions. POMMs represent a variety of chemical families, such as hydrogen-bonded organic frameworks, porous organic salts, porous organic cages, C - H⋅⋅⋅π microporous crystals, supramolecular organic frameworks, π-organic frameworks, halogen-bonded organic framework, and intrinsically porous molecular materials. In some porous materials such as zeolites and metal organic frameworks, the integration of multiscale has been adopted to build materials with multifunctionality and optimized properties. Therefore, considering the significant role of hierarchy in porous materials and the growing importance of POMMs in the realm of synthetic porous materials, we consider it appropriate to dedicate for the first time a critical review covering both topics. Herein, we will provide a summary of literature examples showcasing hierarchical POMMs, with a focus on their main synthetic approaches, applications, and the advantages brought forth by introducing hierarchy.

Halogen Bonds of Halogen(I) Ions─Where Are We and Where to Go?

Halenium ions, X+, are particularly strong halogen-bond donors that interact with two Lewis bases simultaneously to form linear [D···X···D]+-type halonium complexes. Their three-center, four-electron halogen bond is both fundamentally interesting and technologically valuable as it tames the reactivity of halogen(I) ions, opening up new horizons in a variety of fields including synthetic organic and supramolecular chemistry. Understanding this bonding situation enables the development of improved halogen(I) transfer reactions and of advanced functional materials. Following a decade of investigations of basic principles, the range of applications is now rapidly widening. In this Perspective, we assess the status of the field and identify its key advances and the main bottlenecks. Clearing common misunderstandings that may hinder future progress, we aim to inspire and direct future research efforts.

The Impact of ortho-substituents on Bonding in Silver(I) and Halogen(I) Complexes of 2-Mono- and 2,6-Disubstituted Pyridines: An In-Depth Experimental and Theoretical Study

The coordination nature of 2-mono- and 2,6-disubstituted pyridines with electron-withdrawing halogen and electron-donating methyl groups for [N-X-N]+ (X=I, Br) complexations have been studied using 15 N NMR, X-ray crystallography, and Density Functional Theory (DFT) calculations. The 15 N NMR chemical shifts reveal iodine(I) and bromine(I) prefer to form complexes with 2-substituted pyridines and only 2,6-dimethylpyridine. The crystalline halogen(I) complexes of 2-substituted pyridines were characterized by using X-ray diffraction analysis, but 2,6-dihalopyridines were unable to form stable crystalline halogen(I) complexes due to the lower nucleophilicity of the pyridinic nitrogen. In contrast, the halogen(I) complexes of 2,6-dimethylpyridine, which has a more basic nitrogen, are characterized by X-crystallography, which complements the 15 N NMR studies. DFT calculations reveal that the bond energies for iodine(I) complexes vary between -291 and -351 kJ mol-1 and for bromine between -370 and -427 kJ mol-1 . The bond energies of halogen(I) complexes of 2-halopyridines with more nucleophilic nitrogen are 66-76 kJ mol-1 larger than those of analogous 2,6-dihalopyridines with less nucleophilic nitrogen. The experimental and DFT results show that the electronic influence of ortho-halogen substituents on pyridinic nitrogen leads to a completely different preference for the coordination bonding of halogen(I) ions, providing new insights into bonding in halogen(I) chemistry.

Halogen Bonding and/or Covalent Bond: Analogy of 3c-4e N···I···X (X = Cl, Br, I, and N) Interactions in Neutral, Cationic, and Anionic Complexes

X-ray structural measurements and computational analysis demonstrated the similarity of the geometries and electronic structures of the X-I···N (X = Cl, Br, I, and N) bonding in strong halogen-bonded (HaB) complexes and in the anionic or cationic halonium ions. In particular, I···N bond lengths in the solid-state associations formed by strong HaB donors (e.g., I2, IBr, ICl, and N-iodosuccinimide) and acceptors (e.g., quinuclidine or pyridines) were in the same range of 2.3 ± 0.1 Å as those in the halonium ions [e.g., the bis(quinuclidine)iodonium cation or the 1,1'-iodanylbis(pyrrolidine-2,5-dione) anion]. In all cases, bond lengths were much closer to those of the N-I covalent bond than to the van der Waals separations of these atoms. The strong N···I bonding in the HaB complexes led to a substantial charge transfer, lengthening and weakening of the I···X bonds, and polarization of the HaB donors. As a result, the central iodine atoms in the strong HaB complexes bear partial positive charges akin to those in the halonium ions. The energies and Mayer bond orders for both N···I and I···X bonds in such associations are also comparable to those in the halonium ions. The similarity of the bonding in such complexes and in halonium ions was further supported by the analysis of electron densities and energies at bond critical (3, -1) points in the framework of the quantum theory of atoms in molecules and by the density overlap region indicator. Overall, all these data point out the analogy of the symmetric N···I···N bonding in the halonium ions and the asymmetric X···I···N bonding in the strong HaB complexes, as well as the weakly covalent character of these 3c-4e interactions.

A Halogen-Bonded Organic Framework (XOF) Emissive Cocrystal for Acid Vapor and Explosive Sensing, and Iodine Capture

There is a strong and urgent need for efficient materials that can capture radioactive iodine atoms from nuclear waste. This work presents a novel strategy to develop porous materials for iodine capture by employing halogen bonding, mechanochemistry and crystal engineering. 3D halogen-bonded organic frameworks (XOFs) with guest-accessible permanent pores are exciting targets in crystal engineering for developing functional materials, and this work reports the first example of such a structure. The new-found XOF, namely TIEPE-DABCO, exhibits enhanced emission in the solid state and turn-off emission sensing of acid vapors and explosives like picric acid in nanomolar quantity. TIEPE-DABCO captures iodine from the gas phase (3.23 g g-1 at 75 °C and 1.40 g g-1 at rt), organic solvents (2.1 g g-1 ), and aqueous solutions (1.8 g g-1 in the pH range of 3-8); the latter with fast kinetics. The captured iodine can be retained for more than 7 days without any leaching, but readily released using methanol, when required. TIEPE-DABCO can be recycled for iodine capture several times without any loss of storage capacity. The results presented in this work demonstrate the potential of mechanochemical cocrystal engineering with halogen bonding as an approach to develop porous materials for iodine capture and sensing.

A biocompatible pure organic porous nanocage for enhanced photodynamic therapy

Porphyrin-based photosensitizers have been widely utilized in photodynamic therapy (PDT), but they suffer from deteriorating fluorescence and reactive oxygen species (ROS) due to their close π-π stacking. Herein, a biocompatible pure organic porphyrin nanocage (Py-Cage) with enhanced both type I and type II ROS generation is reported for PDT. The porphyrin skeleton within the Py-Cage is spatially separated by four biphenyls to avoid the close π-π stacking within the nanocage. The Py-Cage showed a large cavity and high porosity with a Brunauer-Emmett-Teller surface area of over 300 m2 g-1, facilitating a close contact between the Py-Cage and oxygen, as well as the fast release of ROS to the surrounding microenvironment. The Py-Cage shows superb ROS generation performance over its precursors and commercial ones such as Chlorin E6 and Rose Bengal. Intriguingly, the cationic π-conjugated Py-Cage also shows promising type I ROS (superoxide and hydroxyl radicals) generation that is more promising for hypoxic tumor treatment. Both in vitro cell and in vivo animal experiments further confirm the excellent antitumor activity of the Py-Cage. As compared to conventional metal coordination approaches to improve PDT efficacy of porphyrin derivatives, the pure organic porous Py-Cage demonstrates excellent biocompatibility, which is further verified in both mice and rats. This work of an organic porous nanocage shall provide a new paradigm for the design of novel, biocompatible and effective photosensitizers for PDT.

Supramolecular axial chirality in [N-I-N]+-type halogen bonded dimers

Axial chiral molecules are extensively used as skeletons in ligands for asymmetric catalysis and as building blocks of chiroptical materials. Designing axial chirality at the supramolecular level potentially endows a material with dynamic tunability and adaptivity. In this work, for the first time, we have reported a series of halogen-bonded dimeric complexes with axial chirality that were formed by noncovalent bonds. The [N-I-N]+-type halogen bond is highly directional and freely rotatable with good linearity and ultra-high bond energy; this bond was introduced to couple quinoline moieties with chiral substitutes. The resultant dimers were stable in solutions with thermo-resistance. Prominent steric effects from the 2' chiral pendant allowed the chirality to be transferred to aryl skeletons with induced preferred axial chirality and optical activities. Halogen-bonded complexation presented visible emissions to afford luminescent axial chiral materials, whereby circularly polarized fluorescence and phosphorescence were achieved. The [N-I-N]+-type halogen bond performed as a powerful tool to construct functional axial chiral compounds, enriching the toolbox for asymmetric synthesis and optics.

Two and three-dimensional halogen-bonded frameworks: self-assembly influenced by crystallization solvents

In this paper, two types of solid phase 2D and 3D XBOFs were selectively constructed from identical building blocks of tetraphenylmethane tetrapyridine derivative and 1,4-diiodotetrafluorobenzene by changing the crystallization solvent. This 3D XBOF is a novel hybrid supramolecular organic framework with the synergistic control of hydrogen and halogen bonds.

Linear bis-Coordinate Silver(I) and Iodine(I) Complexes with R3 R2 R1 N Tertiary Amines

Homoleptic [L-I-L]+ iodine(I) complexes (where L is a R3 R2 R1 N tertiary amine) were synthesized via the [L-Ag-L]+ → [L-I-L]+ cation exchange reaction. In solution, the amines form [R3 R2 R1 N-Ag-NR1 R2 R3 ]+ silver(I) complexes, which crystallize out from solution as the meso-[L-Ag-L]+ complexes, as characterized by X-ray crystallography. The subsequent [L-I-L]+ iodine(I) analogues were extremely reactive and could not be isolated in the solid state. Density functional theory (DFT) calculations were performed to study the Ag+ -N and I+ -N interaction energies in silver(I) and iodine(I) complexes, with the former ranging from -80 to -100 kJ mol-1 and latter from -260 to -279 kJ mol-1 . The X-ray crystal structures revealed Ag+ ⋅⋅⋅Cπ and Ag+ ⋅⋅⋅H-C short contacts between the silver(I) cation and flexible N-alkyl/N-aryl groups, which are the first of their kind in such precursor complexes.

N-X⋅⋅⋅O-N Halogen Bonds in Complexes of N-Haloimides and Pyridine-N-oxides: A Large Data Set Study

N-X⋅⋅⋅- O-N+ halogen-bonded systems formed by 27 pyridine N-oxides (PyNOs) as halogen-bond (XB) acceptors and two N-halosuccinimides, two N-halophthalimides, and two N-halosaccharins as XB donors are studied in silico, in solution, and in the solid state. This large set of data (132 DFT optimized structures, 75 crystal structures, and 168 1 H NMR titrations) provides a unique view to structural and bonding properties. In the computational part, a simple electrostatic model (SiElMo) for predicting XB energies using only the properties of halogen donors and oxygen acceptors is developed. The SiElMo energies are in perfect accord with energies calculated from XB complexes optimized with two high-level DFT approaches. Data from in silico bond energies and single-crystal X-ray structures correlate; however, data from solution do not. The polydentate bonding characteristic of the PyNOs' oxygen atom in solution, as revealed by solid-state structures, is attributed to the lack of correlation between DFT/solid-state and solution data. XB strength is only slightly affected by the PyNO oxygen properties [(atomic charge (Q), ionization energy (Is,min ) and local negative minima (Vs,min )], as the σ-hole (Vs,max ) of the donor halogen is the key determinant leading to the sequence N-halosaccharin>N-halosuccinimide>N-halophthalimide on the XB strength.

Iodine(I) and Silver(I) Complexes Incorporating 3-Substituted Pyridines

Building upon the first report of a 3-acetaminopyridine-based iodine(I) complex (1b) and its unexpected reactivity toward ^tBuOMe, several new 3-substituted iodine(I) complexes (2b-5b) have been synthesized. The iodine(I) complexes were synthesized from their analogous silver(I) complexes (2a-5a) via a silver(I) to iodine(I) cation exchange reaction, incorporating functionally related substituents as 3-acetaminopyridine in 1b; 3-acetylpyridine (3-Acpy; 2), 3-aminopyridine (3-NH₂py; 3), and 3-dimethylaminopyridine (3-NMe₂py; 4), as well as the strongly electron-withdrawing 3-cyanopyridine (3-CNpy; 5), to probe the possible limitations of iodine(I) complex formation. The individual properties of these rare examples of iodine(I) complexes incorporating 3-substituted pyridines are also compared to each other and contrasted to their 4-substituted counterparts which are more prevalent in the literature. While the reactivity of 1b toward etheric solvents could not be reproduced in any of the functionally related analogues synthesized herein, the reactivity of 1b was further expanded to a second etheric solvent. Reaction of bis(3-acetaminopyridine)iodine(I) (1b) and ⁱPr₂O gave [3-acetamido-1-(3-iodo-2-methylpentan-2-yl)pyridin-1-ium]PF₆ (1d), which demonstrated potentially useful C-C and C-I bond formation under ambient conditions.

Supramolecular Soft Material Enabled by Metal Coordination and Hydrogen Bonding: Stretchability, Self-Healing, Impact Resistance, 3D Printing, and Motion Monitoring

Metal coordination can significantly improve the macroscopic performance of many materials by enhancing their dynamic features. In this study, two supramolecular interactions, Fe³⁺ -carboxylic acid coordination, and structural water-induced hydrogen bonding, into an artificial polymer were introduced. Various attractive features, including flexibility and stretchability, are achieved because of the bulk state and dynamic hydrogen bonds of poly(thioctic acid-water) (poly[TA-H]). These unique features are considerably enhanced after the incorporation of Fe³⁺ cations into poly[TA-H] because metal coordination increased the mobility of the poly[TA-H] chains. Thus, the poly(thioctic acid-water-metal) (poly[TA-HM]) copolymer exhibited better flexibility and stretchability. Moreover, notable underwater/low-temperature self-healing capacity is obtained via the synergistic effect of the metal and hydrogen bonding. Most of the impact energy is quickly absorbed by poly[TA-H] or poly[TA-HM] and effectively and rapidly dissipated via reversible debonding/bonding via the interactions between the metal and hydrogen. Macroscopic plastic deformation or structural failure is not observed during high-speed (50-70 m s^-1 ) impact experiments or high-altitude (90 m) falling tests. Furthermore, poly[TA-HM] displayed good thermal molding properties, which enabled its processing via 3D fused deposition modeling printing. Poly[TA-HM] also showed considerable effectiveness for monitoring complicated, dynamic, and irregular biological activities owing to its highly pressure-sensitive nature.

Beyond Microporosity in Porous Organic Molecular Materials (POMMs)

Porous organic molecular materials (POMMs) are a novel class of porous materials that cover a wide range of organic-based molecular building blocks connected through weak supramolecular interactions, such as hydrogen bonds, π-π stacking, van der Waals and electrostatic interactions. Despite of their diverse chemical and structural nature, common features to POMMs include solution processability, crystallinity and microporosity. Herein, we focus, for the first time, on the advance of the field of POMMs beyond the archetypical microporosity. In particular, we highlight relevant examples of meso- and macroporous POMMs, as well as hierchachical ones (micro-/meso-, micro-/macro- and meso-/macroporous). We also remark some of their unique properties, and how they can be key in many applications.

Solid-state NMR Spectroscopy of Iodine(I) Complexes

Solid-state NMR has been applied to a series of Barluenga-type iodine(I) [L-I-L]PF₆ (L=pyridine, 4-ethylpyridine, 4-dimethylaminopyridine, isoquinoline) complexes as their hexafluorophosphate salts, as well as their respective non-liquid ligands (L), their precursor silver(I) complexes, and the respective N-methylated pyridinium and quinolinium hexafluorophoshate salts. These results are compared and contrasted to the corresponding solution studies and single-crystal X-ray structures. As the first study of its kind on the solid-state NMR behavior of halogen(I) complexes, practical considerations are also discussed to encourage wider utilization of this technique in the future.

Visible-Light-Switchable Tellurium-Based Chalcogen Bonding: Photocontrolled Anion Binding and Anion Abstraction Catalysis

Exploring new noncovalent bonding motifs with reversibly tunable binding affinity is of fundamental importance in manipulating the properties and functions of supramolecular self-assembly systems and materials. Herein, for the first time, we demonstrate a unique visible-light-switchable telluro-triazole/triazolium-based chalcogen bonding (ChB) system in which the Te moieties are connected by azobenzene cores. The binding strengths between these azo-derived ChB receptors and the halide anions (Cl^- , Br^- ) could be reversibly regulated upon irradiation by visible light of different wavelengths. The cis-bidentate ChB receptors exhibit enhanced halide anion binding ability compared to the trans-monodentate receptors. In particular, the telluro-triazolium-based ChB receptor can achieve both high and significantly photoswitchable binding affinities for halide anions, which enable it to serve as an efficient photocontrolled organocatalyst for ChB-assisted halide abstraction in a Friedel-Crafts alkylation benchmark reaction.

[N···I···N]+ Type Halogen-Bonding-Driven Supramolecular Helical Polymers with Modulated Chirality

The [N···I···N]⁺ type halogen bond has been utilized to synthesize supramolecular architectures, while the applications in constructing helical motifs and modulating supramolecular chirality have been unexplored so far. In this work, the [N···I···N]⁺ halogen bond was introduced to drive the formation of supramolecular helical polymers via a Ag(I) coordination intermediate, showing tunable supramolecular chirality. Pyridine segments were conjugated to the asymmetric ferrocene skeleton, which show "open" and "closed" geometry depending on the sp² N positions. Coordination with Ag(I) generated one-dimensional (1D) double helices and 2D helicates featured the [Ag(O)···I···Ag(O)]⁺ bond, which further stacked into 3D porous frameworks with chiral channels and adjustable pore sizes. Ionic exchange afforded 1D supramolecular helical polymers in solution phases driven by the [N···I···N]⁺ type halogen bonds, which was evidenced by the experimental results and density functional theory calculation. Fc2 exclusively demonstrated tunable supramolecular chirality in the formation of coordinated and halogen bonded polymers. In addition, solvent change would further inverse the helicity of halogen bonded supramolecular helical polymers depending on the rotation of the ferrocenyl core whose "closed" and "open" states were accompanied by the breakage of intramolecular hydrogen bonds. This work introduces a [N···I···N]⁺ type ionic halogen bond to prepare supramolecular helical polymers, providing multiple protocols in regulating helicity by ion exchange and solvent environments.

Hierarchical Assembly of a Micro- and Macroporous Hydrogen-Bonded Organic Framework with Tailored Single-Crystal Size

Porous organic molecular materials represent an emergent field of research in Chemistry and Materials Science due to their unique combination of properties. To enhance their performance and expand the number of applications, the incorporation of hierarchical porosity is required, as exclusive microporosity entails several limitations. However, the integration of macropores in porous organic molecular materials is still an outstanding challenge. Herein, we report the first example of a hydrogen-bonded organic framework (MM-TPY) with hierarchical skeletal morphology, containing stable micro- and macroporosity. The crystal size, from micro to centimetre scale, can be controlled in a single step without using additives or templates. The mechanism of assembly during the crystal formation is compatible with a skeletal crystal growth. As proof of concept, we employed the hierarchical porosity as a platform for the dual, sequential and selective co-recognition of molecular species and microparticles.

Construction of Halogen-Bonded Organic Frameworks (XOFs) as Novel Efficient Iodinating Agents

The structural diversity and the various applications of organic frameworks have attracted much attention in recent years. Recently, halogen-bonded organic frameworks (XOFs) became a novel member of these materials, thereby facilitating the exploration of the interesting structures as well as functions. Here we present two types of [N···I⁺···N] connected XOFs (XOF-TPy and XOF-TPEB) with two tridentate ligands as building blocks. XOF-TPy and XOF-TPEB were characterized by ¹H NMR, UV-vis, X-ray photoelectron spectroscopy (XPS), IR, SEM, and HR-TEM. Two-dimensional (2D) structural models were established based on powder X-ray diffraction (PXRD) data and theoretical simulations. Further experiment showed that these XOFs were excellent iodinating agents for the substituted arylboronic acids with either the electron-donating or electron-withdrawing groups upon heating without any catalyst. This research not only brings further understanding to the XOFs but also extends the applications of XOFs.

Tunable Fluorescence in Two-Component Hydrogen-Bonded Organic Frameworks Based on Energy Transfer

A dumbbell-shaped compound (TPAD) with four 2,4-diaminotriazine moieties as H-bond units and a benzene ring as a bridge group was found to form hydrogen-bonded organic frameworks (HOFs) with strong cyan fluorescence. An energy acceptor, 6,6',6″,6‴-(((benzo[c][1,2,5]thiadiazole-4,7-diylbis-(4,1-phenylene))bis(azanetriyl))tetrakis(benzene-4,1-diyl))tetrakis(1,3,5-triazine-2,4-diamine) (BTAD), with the same molecular skeleton as TPAD and a longer emission wavelength could homogeneously distribute within the framework of TPAD through occupying the locations of TPAD. As a result, two-component HOFs (TC-HOFs) were formed. The nonradiative energy transfer from TPAD as the donor to BTAD as the acceptor happens within frameworks owing to the efficient spectral overlap between the emission of TPAD and the absorption of BTAD. Moreover, the emission wavelengths and colors of TC-HOFs could be easily and continuously modulated by the content of the acceptor. The fluorescence color changed from cyan to orange when the content of BTAD gradually increased. This finding affirms that TC-HOFs with continuously adjustable composition can be constructed from two molecules with the same molecular skeleton, and highly efficient nonradiative energy transfer may happen in porous TC-HOFs. To the best of our knowledge, these TC-HOFs are the first example of TC-HOFs involved in energy transfer.

Supramolecular networks by imine halogen bonding

Halogen bonding of neutral donors using imine groups of porous organic cage compounds as acceptors leads to the formation of halogen-bonded frameworks. We report the use of two different imine cages, in combination with three electron-poor halogen bond donors. Four resulting solid-state structures elucidated by single-crystal X-ray analysis are presented and analysed for the first time by plane-wave DFT calculations and QTAIM-analyses of the entire unit cells, demonstrating the formation of halogen bonds within the networks. The supramolecular frameworks can be obtained either from solution or mechanochemically by liquid-assisted grinding.

Halogen hydrogen-bonded organic framework (XHOF) constructed by singlet open-shell diradical for efficient photoreduction of U(VI)

Synthesis of framework materials possessing specific spatial structures or containing functional ligands has attracted tremendous attention. Herein, a halogen hydrogen-bonded organic framework (XHOF) is fabricated by using Cl- ions as central connection nodes to connect organic ligands, 7,7,8,8-tetraaminoquinodimethane (TAQ), by forming a Cl-···H3 hydrogen bond structure. Unlike metallic node-linked MOFs, covalent bond-linked COFs, and intermolecular hydrogen bond-linked HOFs, XHOFs represent a different kind of crystalline framework. The electron-withdrawing effect of Cl- combined with the electron-rich property of the organic ligand TAQ strengthens the hydrogen bonds and endows XHOF-TAQ with high stability. Due to the production of excited electrons by TAQ under light irradiation, XHOF-TAQ can efficiently catalyze the reduction of soluble U(VI) to insoluble U(IV) with a capacity of 1708 mg-U g-1-material. This study fabricates a material for uranium immobilization for the sustainability of the environment and opens up a new direction for synthesizing crystalline framework materials.

Iodine(i) complexes incorporating sterically bulky 2-substituted pyridines

The silver(i) and iodine(i) complexes of the 2-substituted pyridines 2-(diphenylmethyl)pyridine (1) and 2-(1,1-diphenylethyl)pyridine (2), along with their potential protonated side products, were synthesised to investigate the steric limitations of iodine(i) complex formation. The complexes were characterised by ¹H and ¹H–¹⁵N HMBC NMR, X-ray crystallography, and DFT calculations. The solid-state structures for the silver(i) and iodine(i) complexes were extensively compared to the literature and analysed by DFT to examine the influence of the sterically bulky pyridines and their anions.

The silver(i) and iodine(i) complexes of two sterically bulky 2-substituted pyridines, along with their potential protonated side products, were synthesised to investigate the steric limitations of iodine(i) ion formation.

Do 2-coordinate iodine(I) and silver(I) complexes form Nucleophilic Iodonium Interactions (NIIs) in solution?

The interaction of a [bis(pyridine)iodine(I)]+ cation with a [bis(pyridine)silver(I)]+ cation, in which an iodonium ion acts as nucleophile by transferring electron density to the silver(I) cation, is reinvestigated herein. No...

Towards hydrogen and halogen bonded frameworks based on 3,5-bis(triazolyl)pyridinium motifs

Construction of supramolecular assemblies using hydrogen and halogen bonding between anions and the 3,5-bis(triazolyl)pyridinium motif was investigated.

Macrocyclic complexes based on [N⋯I⋯N]+ halogen bonds

New 1-2 nm macrocyclic iodine(I) complexes prepared VIA a simple ligand exchange reaction manifest rigid 0.5-1 nm cavities that bind the hexafluorophosphate anion in the gas phase. The size of the cavities and the electrostatic interactions with the iodine(I) cations influence the anion binding properties of these macrocyclic complexes.

Halogen bonding regulated functional nanomaterials

Non-covalent interactions have gained increasing attention for use as a driving force to fabricate various supramolecular architectures, exhibiting great potential in crystal and materials engineering and supramolecular chemistry. As one of the most powerful non-covalent bonds, the halogen bond has recently received increasing attention in functional nanomaterial design. The present review describes the latest studies based on halogen bonding induced self-assembly and its applications. Due to the high directionality and controllable interaction strength, halogen bonding can provide a facile platform for the design and synthesis of a myriad of nanomaterials. In addition, both the fundamental aspects and the real engineering applications are discussed, which encompass molecular recognition and sensing, organocatalysis, and controllable multifunctional materials and surfaces.

Dihypoiodites stabilised by 4-ethylpyridine through O-I-N halogen bonds

Four bis(O-I-N) compounds have been synthesised from various dihypoiodites and 4-ethylpyridine. The compounds were characterised in both the solution and solid states by NMR spectroscopy (¹H, ¹⁵N), X-ray diffraction, and computational calculations.

Are bis(pyridine)iodine(I) complexes applicable for asymmetric halogenation?

Enantiopure halogenated molecules are of tremendous importance as synthetic intermediates in the construction of pharmaceuticals, fragrances, flavours, natural products, pesticides, and functional materials. Enantioselective halofunctionalizations remain poorly understood and generally applicable procedures are lacking. The applicability of chiral trans-chelating bis(pyridine)iodine(i) complexes in the development of substrate independent, catalytic enantioselective halofunctionalization has been explored herein. Six novel chiral bidentate pyridine donor ligands have been designed, routes for their synthesis developed and their [N–I–N]⁺-type halogen bond complexes studied by ¹⁵N NMR and DFT. The chiral complexes encompassing a halogen bond stabilized iodenium ion are shown to be capable of efficient iodenium transfer to alkenes; however, without enantioselectivity. The lack of stereoselectivity is shown to originate from the availability of multiple ligand conformations of comparable energies and an insufficient steric influence by the chiral ligand. Substrate preorganization by the chiral catalyst appears a necessity for enantioselective halofunctionalization.

The enantioselectivity of the iodine(i) transfer process from chiral bis(pyridine)iodine(i) complexes to alkenes is explored.

The Influence of Secondary Interactions on the [N-I-N]+ Halogen Bond

[Bis(pyridine)iodine(I)]⁺ complexes offer controlled access to halonium ions under mild conditions. The reactivity of such stabilized halonium ions is primarily determined by their three-center, four-electron [N-I-N]⁺ halogen bond. We studied the importance of chelation, strain, steric hindrance and electrostatic interaction for the structure and reactivity of halogen bonded halonium ions by acquiring their ¹⁵ N NMR coordination shifts and measuring their iodenium release rates, and interpreted the data with the support of DFT computations. A bidentate ligand stabilizes the [N-I-N]⁺ halogen bond, decreasing the halenium transfer rate. Strain weakens the bond and accordingly increases the release rate. Remote modifications in the backbone do not influence the stability as long as the effect is entirely steric. Incorporating an electron-rich moiety close by the [N-I-N]⁺ motif increases the iodenium release rate. The analysis of the iodine(I) transfer mechanism highlights the impact of secondary interactions, and may provide a handle on the induction of stereoselectivity in electrophilic halogenations.