Solid-State Red Laser with a Single Longitudinal Mode from Carbon Dots

Crystallization-induced emission from F-doped carbon dots

Herein, F-doped CDs with bright red SSF were synthesized by a solvothermal method using trifluoroethanol as the solvent and m-hydroxybenzaldehyde as the carbon source. Strong F-F interactions are vital for inducing crystallization, and solid luminescence is achieved by blocking the nonradiative energy dissipation pathways of crystalline organizations.

Hydrophobic Mn-Doped Solid-State Red-Emitting Carbon Nanodots with AIE Effect and Their Hydrogel Composites for Color-Changing Anticounterfeiting

The aggregation-caused quenching has always limited the high concentration and solid-state applications of carbon nanodots. While the aggregation-induced emission effect, dominated by intramolecular motion, may be an effective means to solve this problem. Here, hydrophobic solid-state red-light carbon nanodots (M-CDs) with 95% yield are synthesized by a one-step hydrothermal method using 2,2'-dithiodibenzoic acid as the carbon source and manganese acetate as the dopant source. The disulfide bond of 2,2'-dithiodibenzoic acid serves as the symmetry center of molecular rotation and Mn catalyzes the synthesis of M-CDs, which promotes the formation of the central graphitic carbon structure. The M-CDs/agar hydrogel composites can achieve fluorescence transition behavior because of the special fluorescence transition properties of M-CDs. When this composite hydrogel is placed in water, water molecules contact with M-CDs through the network structure of the hydrogels, making the aggregated hydrogels of M-CDs fluorescence orange-red under 365 nm excitation. While in dimethyl sulfoxide, water molecules in the hydrogels network are replaced and the M-CDs fluoresce blue when dispersed, providing a potential application in information encryption. In addition, high-performance monochromatic light-emitting diode (LED) devices are prepared by compounding M-CDs with epoxy resin and coating them on 365 nm LED chips.

Facile synthesis of S, N-co-doped carbon dots for bio-imaging, Fe3+ detection and DFT calculation

Turning waste into wealth, herein, two highly fluorescent N and S co-doped carbon dots (N, S-CDs-A and N, S-CDs-B) were synthesized by the hydrothermal reaction of contaminant reactive red 2 (RR2) and L-cysteine or L-methionine, respectively. The detailed morphology and structure of N, S-CDs were characterized by XRD, Raman spectrum, FTIR spectra, TEM, HRTEM, AFM and XPS. The maximum fluorescent of N, S-CDs-A and N, S-CDs-B are 565 and 615 nm under different excitation wavelengths with moderate fluorescence intensity of 14.0 % and 6.3 %, respectively. The microstructure models of N, S-CDs-A and N, S-CDs-B, which were induced by FT-IR, XPS and element analysis, had been applied in DFT calculation. The result indicated that the doping of S and N is beneficial to obtain the red-shift of fluorescent spectra. Both N, S-CDs-A and N, S-CDs-B showed highly sensitive and selective to Fe3+. N, S-CDs-A can also detect Al3+ ion with high sensitivity and selectivity. Finally, N, S-CDs-B was successfully applied in cell imaging.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

Recastable assemblies of carbon dots into mechanically robust macroscopic materials

Assembly of nanoparticles into macroscopic materials with mechanical robustness, green processability, and recastable ability is an important and challenging task in materials science and nanotechnology. As an emerging nanoparticle with superior properties, macroscopic materials assembled from carbon dots will inherit their properties and further offer collective properties; however, macroscopic materials assembled from carbon dots solely remain unexplored. Here we report macroscopic films assembled from carbon dots modified by ureido pyrimidinone. These films show tunable fluorescence inherited from carbon dots. More importantly, these films exhibit collective properties including self-healing, re-castability, and superior mechanical properties, with Young's modulus over 490 MPa and breaking strength over 30 MPa. The macroscopic films maintain original mechanical properties after several cycles of recasting. Through scratch healing and welding experiments, these films show good self-healing properties under mild conditions. Moreover, the molecular dynamics simulation reveals that the interplay of interparticle and intraparticle hydrogen bonding controls mechanical properties of macroscopic films. Notably, these films are processed into diverse shapes by an eco-friendly hydrosetting method. The methodology and results in this work shed light on the exploration of functional macroscopic materials assembled from nanoparticles and will accelerate innovative developments of nanomaterials in practical applications.

Carbon Dots-Types, Obtaining and Application in Biotechnology and Food Technology

Materials with a "nano" structure are increasingly used in medicine and biotechnology as drug delivery systems, bioimaging agents or biosensors in the monitoring of toxic substances, heavy metals and environmental variations. Furthermore, in the food industry, they have found applications as detectors of food adulteration, microbial contamination and even in packaging for monitoring product freshness. Carbon dots (CDs) as materials with broad as well as unprecedented possibilities could revolutionize the economy, if only their synthesis was based on low-cost natural sources. So far, a number of studies point to the positive possibilities of obtaining CDs from natural sources. This review describes the types of carbon dots and the most important methods of obtaining them. It also focuses on presenting the potential application of carbon dots in biotechnology and food technology.

Centralized Excited States and Fast Radiation Transitions Reduce Laser Threshold in Carbon Dots

As a new type of solution-processed nano-laser material, carbon dots (CDs) have shown considerable potential in optical communication, laser displays, micro/nano processing, and biomedicine. Reducing the laser threshold of the gain material is of considerable significance for further development of CDs' applications in the field of micro/nano lasers. A series of blue-emissive CDs (B-CDs) are synthesized by changing the molar ratios of the precursors (citric acid (CA): L-Cysteine (L-Cys)). B-CDs have a structure of carbon nanoparticles with their surface being modified with 5-oxo-3,5-dihydro-2Hthiazolo [3,2-a]pyridine-7-carboxylic acid (TPCA). The laser can only be generated when the molar ratio of the precursors is between 1:1 and 2:1. With an increase in this ratio, the laser threshold decreases from 341.6 to 165.5 mJ cm^-2 . The decrease in the laser threshold is attributed to the increase in the radiation transition rate and centralized sp³ -related excited state levels, which are favorable for light amplification and population inversion. These results will be instructional for the reasonably design of CDs-based laser materials and prompt their potential use in practical photonics.

Heating-free synthesis of red emissive carbon dots through separated processes of polymerization and carbonization

Polymerization and carbonization are believed as two basic processes for the bottom-up synthesis of carbon dots (CDs). Since these two processes usually occur simultaneously due to the high reaction temperature and fast reaction rate, it is still a challenge to separate and control these two processes. In the present work, we reported a new room temperature method, which achieved the separated and controlled polymerization and carbonization processes. The polymerization process is realized by dissolving o-phenylenediamine (OPD) in ethanol at room temperature, and finally obtained polymer dots (PDs) without any lattice with a sphere size of 29.6 nm. The carbonization process begins in a manual way by adding concentrated sulfuric acid. After carbonization, CDs (noted as CPDs in this work) with a size of 3.6 nm and a clear lattice can be obtained. Importantly, the separated polymerization and carbonization make us possible to adjust the composition or interactions of intermediate products during the synthesis process. As a prototype, we added acetic acid (AA) additives into OPD precursors during the polymerization stage. Due to the crosslink enhanced emission (CEE) effect via hydrogen bonds which are produced by the amide groups from AA reaction products with H in the -NH₃⁺ or aromatic ring, the resulted CPDs show improved PLQY from an initial 6.87% (without AA) to 16.47%. The current work realized the separated and controllable polymerization and carbonization processes, opening up the door for tuning the composition and interactions of intermediate products before carbonization.

Solid-state Fluorescence from Carbon Dots Widely Tunable from Blue to Deep Red through Surface Ligand Modulation

Carbon dots (CDs) find widespread attention due to their remarkable fluorescent and electronic properties. However, aggregation-caused quenching currently limits the application of CDs in colored displays. The construction of CDs with color-tunable solid-state fluorescence (SSF) is rarely reported, since the preparation of SSF CDs is technically challenging. Herein, through surface ligand modulation, SSF CDs with an emission-color span of almost 300 nm (from blue to deep red) were obtained. In-depth structure-property studies reveal that intra- and inter-molecular hydrogen-bonding inside SSF CDs provokes the emission properties in the aggregated state. Photodynamic characterizations demonstrate emission wavelengths can be switched smoothly by deliberately altering conjugation ability between substituent ligands and CDs core. Three-dimensional printing patterning is used to create a range of emissive objects, demonstrating the commercial potential for use in optical lamps.

Boron-enriched rice-like homologous carbon nanoclusters with a 51.5% photoluminescent quantum yield for highly sensitive determination of endogenous hydroxyl radicals in living cells

Exploring the ultrahigh quantum efficiency of a carbon-based probe via a green and simple technique, and utilisation of its sensing ability for highly bioactive molecule detection is still highly challenging. Herein, we prepared a novel boron-enriched rice-like homologous carbon nanoclusters (BRCNs) with an ultrahigh quantum efficiency of ∼51.5% by introduction of a conjugated structure attached to the CN bond and an electron-withdrawing boron active centre. Unexpectedly, the BRCNs obtained showed a stable dispersion of rice-like carbon nanograins, composed of small carbon dot assembled nanoclusters with an average diameter size of ∼30 nm, and containing boron units of ∼24.68 at%. What's exciting is that the BRCNs obtained exhibited an "on-off-on" three-state emission with the addition of an hydroxyl radical (OH˙) and its antioxidants. Thus, two distinctive fluorescent responses for OH˙ and antioxidants based on the BRCN probe had been developed, and the mechanism has been determined using TEM, XPS, FT-IR, FL, UV-vis spectrophotometry, UPS and fluorescent lifetimes. The OH˙, generated from the Fenton's reagent, preferentially attack the electron-deficient vacancy p orbit of the boron atom in the surface of the BRCNs, which results in the boron atom being easily substituted/attacked by OH˙, and leading to spontaneous aggregation induced quenching (AIQ) due to the existence of a strong intermolecular hydrogen bond between denatured BRCNs. Furthermore, the proposed method was also successfully applied to monitor endogenous OH˙ generation in HeLa cells by confocal imaging, which could be used for elucidating OH˙-induced oxidative damage to biological tissues and proteins.

A sensitive ratiometric fluorescent sensor based on carbon dots and CdTe quantum dots for visual detection of biogenic amines in food samples

A novel dual-emission ratiometric fluorescent sensor for biogenic amines (BAs) was prepared by simple mixing blue fluorescent carbon dots (CDs) and yellow fluorescent CdTe quantum dots (CdTe QDs). Based on different sensitive properties of pH, CdTe QDs and CDs were used as the response signal and internal reference signal, respectively. The developed ratiometric fluorescent sensor achieved quantitative analysis of eight kinds of BAs with rapid response (30 s) and low limits of detection (1.259-5.428 μM). Furthermore, color-tunable fluorescent test strips were constructed by easily assembling CDs and CdTe QDs onto filter paper. The obtained smart label showed a distinguishable fluorescent color variation from blue to green during the corruption of shrimp samples. The smart label with advantages of convenience and rapidness provided a method for visually monitoring the freshness of food samples.

Ultra-Broadband Random Laser and White-Light Emissive Carbon Dots/Crystal In-Situ Hybrids

The continuous white-light emission of carbon dots (CDs) can be applied to producing multicolor laser emissions by one single medium. Meanwhile, the solid-state emission greatly contributes to its practical application. In this work, a strategy to realize the in-situ hybridization of silane-functionalized CDs (SiCDs) and 1,3,5-benzenetricarboxylic acid trimethyl ester (Et3BTC) by a one-pot solvothermal method is reported. Significantly, the SiCDs/Et3BTC hybrid crystals exhibit ultra-broadband random laser emission over the near ultraviolet-visible region under 265 nm nanosecond pulsed laser excitation. The wavelength region of laser emission is achieved from 315 to 600 nm within an emission band of CDs-based materials. It is worth noting that the wavelength range of the laser is wider than the previously reported works. It is proposed that the continuous white-light emission of SiCDs caused by multiple fluorescence centers mainly gives rise to the broadband random laser emission. Moreover, the crystals are conducive to forming resonance and realizing solid-state laser emission. This in-situ method is expected to enable a more convenient, cheaper, and greener approach to prepare luminescent hybrids for application in multicolor laser displays, multi-level laser anti-counterfeiting, supercontinuum light sources, and so on.

Toward Strong Near-Infrared Absorption/Emission from Carbon Dots in Aqueous Media through Solvothermal Fusion of Large Conjugated Perylene Derivatives with Post-Surface Engineering

Carbon dots (CDs) have attracted significant interest as one of the most emerging photoluminescence (PL) nanomaterials. However, the realization of CDs with dominant near-infrared (NIR) absorption/emission peaks in aqueous solution remains a great challenge. Herein, CDs with both main NIR absorption bands at 720 nm and NIR emission bands at 745 nm in an aqueous solution are fabricated for the first time by fusing large conjugated perylene derivatives under solvothermal treatment. With post-surface engineering, the polyethyleneimine modified CDs (PEI-CDs) exhibit enhanced PL quantum yields (PLQY) up to 8.3% and 18.8% in bovine serum albumin aqueous and DMF solutions, which is the highest PLQY of CDs in NIR region under NIR excitation. Density functional theory calculations support the strategy of fusing large conjugated perylene derivatives to achieve NIR emissions from CDs. Compared to the commercial NIR dye Indocyanine green, PEI-CDs exhibit excellent photostability and much lower cost. Furthermore, the obtained PEI-CDs illustrate the advantages of remarkable two-photon NIR angiography and in vivo NIR fluorescence bioimaging. This work demonstrates a promising strategy of fusing large conjugated molecules for preparing CDs with strong NIR absorption/emission to promote their bioimaging applications.

Photoluminescence mechanisms of red-emissive carbon dots derived from non-conjugated molecules

Red-emissive carbon dots (R-CDs) have been widely studied because of their potential application in tissue imaging and optoelectronic devices. At present, most R-CDs are synthesized by using aromatic precursors, but the synthesis of R-CDs from non-aromatic precursors is challenging, and the emission mechanism remains unclear. Herein, different R-CDs were rationally synthesized using citric acid (CA), a prototype non-aromatic precursor, with the assistance of ammonia. Their structural evolution and optical mechanism were investigated. The addition of NH₃·H₂O played a key role in the synthesis of CA-based R-CDs, which shifted the emission wavelength of CA-based CDs from 423 to 667 nm. Mass spectrometry (MS) analysis indicated that the amino groups served as N dopants and promoted the formation of localized conjugated domains through an intermolecular amide ring, thereby inducing a significant emission redshift. The red-emissive mechanism of CDs was further confirmed by control experiments using other CA-like molecules (e.g., aconitic acid, tartaric acid, aspartic acid, malic acid, and maleic acid) as precursors. MS, nuclear magnetic resonance characterization, and computational modeling revealed that the main carbon chain length of CA-like precursors tailored the cyclization mode, leading to hexatomic, pentatomic, unstable three/four-membered ring systems or cyclization failure. Among these systems, the hexatomic ring led to the largest emission redshift (244 nm, known for CA-based CDs). This work determined the origin of red emission in CA-based CDs, which would guide research on the controlled synthesis of R-CDs from other non-aromatic precursors.

Electron-phonon coupling-assisted universal red luminescence of o-phenylenediamine-based carbon dots

Due to the complex core-shell structure and variety of surface functional groups, the photoluminescence (PL) mechanism of carbon dots (CDs) remain unclear. o-Phenylenediamine (oPD), as one of the most common precursors for preparing red emissive CDs, has been extensively studied. Interestingly, most of the red emission CDs based on oPD have similar PL emission characteristics. Herein, we prepared six different oPD-based CDs and found that they had almost the same PL emission and absorption spectra after purification. Structural and spectral characterization indicated that they had similar carbon core structures but different surface polymer shells. Furthermore, single-molecule PL spectroscopy confirmed that the multi-modal emission of those CDs originated from the transitions of different vibrational energy levels of the same PL center in the carbon core. In addition, the phenomenon of "spectral splitting" of single-particle CDs was observed at low temperature, which confirmed these oPD-based CDs were unique materials with properties of both organic molecules and quantum dots. Finally, theoretical calculations revealed their potential polymerization mode and carbon core structure. Moreover, we proposed the PL mechanism of red-emitting CDs based on oPD precursors; that is, the carbon core regulates the PL emission, and the polymer shell regulates the PL intensity. Our work resolves the controversy on the PL mechanism of oPD-based red CDs. These findings provide a general guide for the mechanism exploration and structural analysis of other types of CDs.

Polymer Carbon Nanodots: A Novel Electrochemiluminophore for Dual Mode Detection of Ferric Ions

The development of simple and effective dual-mode analytical methods plays crucial regulatory roles in the discrimination of relevant target species, because of their built-in cross reference correction and high accuracy. In this work, a novel polymer carbon nanodots (PCNDs) prepared from a facile one-pot hydrothermal procedure using readily available l-tryptophan and l-phenylalanine as precursors, showed excellent aqueous solubility and blue fluorescence property with a high quantum yield of 29%. Moreover, the PCNDs was demonstrated to be a robust luminophore with electrochemiluminescence (ECL) efficiency of 43% was achieved by using K₂S₂O₈ as a coreactant. The spooling ECL spectroscopy was employed to take insight into excited states responsible for the potential-dependent ECL emissions. Most importantly, when introduced into construction of the fluorescence and ECL dual mode sensing platform, for the first time, the PCNDs displayed prominent performance for the detection of ferric ions (Fe³⁺). The ferric ions could be quantified ranging from micromolar to millimolar with a detection limit of 0.22 and 5.3 μM, respectively. Such a dual-functional sensing platform also exhibits excellent selectivity, reproducibility and stability. Results from this work indicate that PCNDs showing great promise as a bright luminophore for the fabrication of low-cost, high-performance dual-signal readout platforms for ferric ions determination.

Rational Synthesis of Solid-State Ultraviolet B Emitting Carbon Dots via Acetic Acid-Promoted Fractions of sp3 Bonding Strategy

Carbon dots (CDs) have received tremendous attention for their excellent photoluminescence (PL) properties. However, it remains a great challenge to obtain CDs with ultraviolet (UV, 200-400 nm) emission in solid state, which requires strict control of the CDs structure and overcoming the aggregation-caused quenching (ACQ). Herein, a new sp³ compartmentalization strategy is developed to meet these requirements, by employing acetic acid to promote fractions of sp³ bonding during the synthesis of CDs. It markedly decreases the size of sp² conjugating units in the CDs, and shifts PL emission to the ultraviolet B (UVB) region (λ_max  = 308 nm). Moreover, sp² domains are well spatially compartmentalized by sp³ domains and the ACQ effect is minimized, enabling the high quantum yield in solid state (20.2%, λ_ex  = 265 nm) with a narrow bandwidth of 24 nm and environmental robustness. The solid-state UVB emissive CDs are highly desired for application in photonic devices. Hence, a demo of UVB light-emitting diodes is fabricated for plant lighting, leading to a 29% increase of ascorbic acid content in the basil. Overall, a rational and efficient way to construct solid UVB-CDs phosphors for wide applications is provided.