ATP-Induced Emergent Circularly Polarized Luminescence and Encryption

Helically Chiral Mixed-Valence Systems Comprising N-Heterotriangulenes: Stabilization of the Cationic Species by π-Expansion

We report the efficient stabilization of nitrogen-centered radical cations in a dimeric N-heterotriangulene bridged by a rigid π-conjugated [5]helicene backbone (NTH). The rigid scaffold exhibits helical chirality, allowing the enantiomers to be separated and their chiroptical properties studied, including circular dichroism (CD) and circularly polarized luminescence (CPL). Successive oxidation towards the radical cation NTH⋅+ and dication NTH2+ reveals strong electronic communication between the two nitrogen-centers, as demonstrated by X-ray crystallography, electrochemistry, UV/Vis/nIR spectroscopy and electron paramagnetic resonance (EPR) spectroscopy. CD measurements of the enantiomerically pure cations reveal strong Cotton effects in the nIR region extending up to 2000 nm. Density functional theory confirms the observed enhanced electronic communication, classifying NTH⋅+ as a Robin-Day Class III mixed-valence charge-transfer (MV-CT) system. NTH2+ exhibits a quinoidal structure with partial diradical character and open-shell singlet ground state, as shown by variable temperature EPR measurements. Time-resolved transient absorption spectroscopy shows the photo-induced generation of NTH⋅+ in the presence of a suitable electron acceptor.

A Binaphthyl Macrocycle Exhibiting Circularly Polarized Luminescence: On-off Switch Triggered by Molecular Recognition

A series of D4-symmetric (S)-1,1'-binaphthyl cyclic tetramers were synthesized. The signs and intensities of circularly polarized luminescence (CPL) of the tetramers depend on the substituents, which were caused by differences of the binaphthyl dihedral angles in the excited state. The chiral dye with hydroxy groups did not exhibit CPL. However, this dye exhibited turned-on CPL upon addition of amino acids such as l-phenylalanine in an enantioselective and positive allosteric manner, and the glum value reached +7.3 × 10-3. The CPL was repeatedly switched on and off by changing temperature. The turn-on CPL was caused by the guest molecules expanding the binaphthyl dihedral angles with multiple hydrogen bonds. (+)-Andersen sulfinate also induced enantioselective turn-on CPL.

Microbe-assisted fabrication of circularly polarized luminescent bacterial cellulosic hybrids

The fabrications of circularly polarized luminescent (CPL) material are mainly based on the chemical and physical strategies. Controlled biosynthesis of CPL-active materials is beset with difficulties due to the lack of bioactive luminescent precursors and bio-reactors. Enlighted by microbe-assisted asymmetric biosynthesis, herein, we show the in situ bacterial fermentation of Komagataeibacter sucrofermentants to fabricate a series of bacterial cellulosic biofilms with CPL of green, orange, red, and near-infrared colors. This process can trigger CPL emission for CPL-silent glycosylated luminophores and amplify the glum of weak CPL-active luminophores up to a 10-2 scale. To confirm glycosidic bonds formation during the bacterial copolymerization process, we develop an assay utilizing the cellulase-catalyzed biodegradation of BC hybrids. More importantly, we achieve the information encryption and Fe3+ dual-channel detection based on hybrid bacterial cellulosic biofilms. Therefore, this study not only provides another vision for CPL materials preparation but also broadens the application of bacterial cellulosic hybrids.

Near-infrared circularly polarized luminescence enabled by chiral inorganic nanomaterials

Near-infrared circularly polarized luminescence (NIR-CPL) has attracted widespread attention owing to its fascinating characteristic-circular polarization in specific illumination regions-offering advances in applications such as information security and cancer detection. For the generation of NIR-CPL, chiral inorganic nanomaterials have emerged as the desirable candidates due to their extraordinary chiroptical properties. In this mini-review, we first highlight the recent advances in NIR-CPL produced from chiral inorganic nanomaterials. Thereafter, we present the applications of NIR-CPL in information security and cancer detection. Finally, we prospect the challenges in this field and provide new perspectives and insights for the development of novel NIR-CPL materials and new applications.

Upconversion/Downshifting Circularly Polarized Luminescence over 1200 nm in a Single Nanoparticle for Optical Anticounterfeiting and Information Encryption

Multimodal upconversion and downshifting circularly polarized luminescent materials hold significant potential for optical anticounterfeiting applications due to their exceptional chiroptical properties. However, constructing these materials within a single emitter remains challenging. In this study, a conceptual model of multimodal upconversion/downshifting circularly polarized luminescence (CPL) is realized within a single nanoparticle. A new type of nanoparticles with multilayer core-shell architecture is fabricated, capable of delivering upconversion/downshifting luminescence, when excited by a 980 nm laser. Utilizing a co-assembly strategy, multimodal upconversion/downshifting CPL emission, covering a broad emission range from ultraviolet (UV) to the second near-infrared (NIR-II) region, can be realized at the supramolecular level. These chiroptical properties closely follow the chirality of host matrix and are strongly dependent on the distribution mode of nanoparticles within the matrix films. The multimodal upconversion/downshifting CPL behavior enabled cutting-edge encryption applications including optical anticounterfeiting and information encryption. This work introduces a novel approach to designing multimodal upconversion/downshifting CPL materials and opens new avenues for the development of chiroptical functional materials.

Tunable Circularly Polarized Luminescence Enabled by Photo-induced Phase Transition in a Blue-phase Liquid Crystal with a Wide Room-temperature Window

Chiral luminescent liquid crystal (LC) materials with switchable circularly polarized luminescence (CPL) signals have received extensive attention, in which the use of light stimulation to achieve different CPL states is of great significance. However, there are very few reports on the generation and regulation of CPL signals enabled by blue phase LC (BPLC). Herein, achieving CPL signal inversion based on the phase transition induced by light/temperature stimulation in a BPLC system with a wide room-temperature window is reported. A binaphthalene azo-based chiral photoswitch (S)-switch 3 with high helical twisted power (HTP) and large HTP variation is synthesized, and a BP system with a wide room temperature range is further fabricated by doping (S)-switch 3 and a fluorescence molecule into a bulk LC. By regulating the doping amount of (S)-switch 3, a phase transition from BP to cholesteric (Ch) phase at room temperature is observed upon 365 nm UV light irradiation or during cooling process, and the polarization inversion of CPL signal is correspondingly found due to the different CPL generation mechanisms of BPLC and CLC. This study provides a new strategy for the flexible regulation of CPL signals in a BPLC system.

Circularly Polarized Luminescence in Composite Films: A Combination of Perovskites and Chiral Nematic Liquid Crystals

Chiral inorganic nanomaterial-based circularly polarized luminescence (CPL) materials have shown substantial promise in multiple research areas. However, the luminescence dissymmetry factor (glum), a key parameter for CPL, is far from satisfactory, especially for inorganic molecules with high luminescent quantum efficiency and diverse shapes and sizes. Obtaining large glum values is an urgent and crucial task in the field of CPL research. Among different approaches, the combination of inorganic nanomaterials and chiral nematic liquid crystals (N*-LCs) offers distinct advantages in achieving high glum values due to their distinctive optical characteristics and remarkable versatility. This concise review systematically investigates the recent advancements in CPL-active materials consisting of perovskites and N*-LCs. It elaborates on their preparation techniques, optical characteristics, and potential applications. Additionally, a brief outlook on their future development is offered. It is expected that this combination will assume an increasingly significant role in the CPL research field and attract more researchers to explore this area.

A Dynamic H-Bonding Network Enables Stimuli-Responsive Color-Tunable Chiral Afterglow Polymer for 4D Encryption

The development of stimuli-responsive and color-tunable chiral organic afterglow materials has attracted great attention but remains a daunting challenge. Here, a simple yet effective strategy through the construction of a dynamic H-bonding network is proposed to explore the multi-color stimuli-responsive chiral afterglow by doping a self-designed chiral phosphorescent chromophore into a polyvinyl alcohol matrix. A stimuli-responsive deep blue chiral afterglow system with a lifetime of up to 3.35 s, quantum yield of 25.0%, and luminescent dissymmetry factor of up to 0.05 is achieved through reversible formation and breakdown of the H-bonding network upon thermal-heating and water-fumigating. Moreover, multi-color stimuli-responsive chiral afterglow can be obtained by chiral and afterglow energy transfer, allowing the establishment of afterglow information displays and high-level 4D encryption. This work not only offers a facile platform to develop advanced stimuli-responsive materials but also opens a new avenue for developing next-generation optical information technology with enhanced functionality and responsiveness.

From Simple Probe to Smart Composites: Water-Soluble Pincer Complex With Multi-Stimuli-Responsive Luminescent Behaviors

Water-soluble smart materials with multi-stimuli-responsiveness and ultra-long room-temperature phosphorescence (RTP) have garnered broad attention. Herein, a water-soluble terpyridine zinc complex (MeO-Tpy-Zn-OAc), featuring a simple donor-π-acceptor (D-π-A) structure is presented, which responds to a variety of stimuli, including changes in solvents, pH, temperature, and the addition of amino acids. Notably, MeO-Tpy-Zn-OAc functions as a fluorescence probe, capable of visually and selectively discriminating aspartate or histidine among other common amino acids in water. Additionally, when incorporated into polyvinyl alcohol (PVA) to form the composite MeO-Tpy-Zn-OAc@PVA, the material exhibits reversible writing, photochromism, and a prolonged RTP with a 14 s afterglow. These unique properties enable the composite to be utilized in potential applications such as secure data encryption and inkless printing.

Hierarchical assembly of Ag40 nanowheel ranging from building blocks to diverse superstructure regulation

Achieving precise and controllable hierarchical self-assembly of functional nanoclusters within crystal lattices to create distinct architectures is of immense significance, yet it creates considerable challenges. Here we successfully synthesized a silver nanowheel Ag40, along with its optically pure enantiomers S-/R-Ag40. Each species possesses an internal nanospace and exhibits host-guest interactions. These structures are constructed from primary building blocks (Ag9). By manipulating the surface anions and guest molecules, the nanowheels function as secondary building blocks, spontaneously organizing into complex double- and triple-helical crystalline superstructures or one-dimensional chains {Ag41}n through conformational matching and diverse noncovalent interactions. Moreover, we demonstrate that the water-mediated complex specifically assembled with uridine monophosphate nucleotides, resulting in chiral assemblies of Ag40 that exhibit chiroptical activity for specific recognition. Our findings provide insights into the efficient construction of assemblies with hollow frameworks and propose strategies for superstructure engineering by manipulating surface motifs.

Manipulating Chiroptical Activities in 0D Chiral Hybrid Manganese Bromides by Solvent Molecular Engineering

0D hybrid metal halides (0D HMHs) with fully isolated inorganic units provide an ideal platform for studying the correlations between chiroptical activities and crystal structures at atomic levels. Here, through the incorporation of different solvent molecules, a series of 0D chiral manganese bromides (RR/SS-C20H28N2)3MnBr8·2X (X = C2H5OH, CH3OH, or H2O) are synthesized to elucidate their chiroptical properties. They show negligible circular dichroism signals of Mn absorptions due to C2v-symmetric [MnBr4]2- tetrahedra. However, they display distinct circularly polarized luminescence (CPL) signals with continuously increased luminescence asymmetry factors (glum) from 10-4 (X = C2H5OH) to 10-3 (X = H2O). The increased glum value is structurally revealed to originate from the enhancement of [MnBr4]2- tetrahedral bond-angle distortions, due to the presence of different solvent molecules. Furthermore, (RR/SS-C20H28N2)MnBr4·H2O enantiomers with larger bond-angle distortions of [MnBr4]2- tetrahedra are synthesized based on hydrobromic acid-induced structural transformation of (RR/SS-C20H28N2)3MnBr8·2H2O enantiomers. Therefore, such (RR/SS-C20H28N2)MnBr4·H2O enantiomers exhibit enhanced CPL signals with |glum| up to 1.23 × 10-2. This work provides unique insight into enhancing chiroptical activities in 0D HMH systems.

Recent Progress in Circularly Polarized Luminescent Materials Based on Cyclodextrins

Circularly polarized luminescence (CPL) materials have been widely used in the fields of bioimaging, optoelectronic devices, and optical communications. The supramolecular interaction, involving harnessing non-covalent interactions between host and guest molecules to control their arrangements and assemblies, represents an advanced approach for facilitating the development of CPL materials and finely constructing and tuning the desired CPL properties. Cyclodextrins (CDs) are cyclic natural polysaccharides, which have also been ubiquitous in various fields such as molecular recognition, drug encapsulation, and catalyst separation. By adjusting the interactions between CDs and guest molecules precisely, composite materials with CPL properties can be facilely generated. This review aims to outline the design strategies and performance of CD-based CPL materials comprehensively and provides a detailed illustration of the interactions between host and guest molecules.

Efficient Ultraviolet Circularly Polarized Luminescence in Zero-Dimensional Hybrid Cerium Bromides

Ultraviolet circularly polarized luminescence (UV-CPL) with high photon energy shows great potential in polarized light sources and stereoselective photopolymerization. However, developing luminescent materials with high UV-CPL performance remains challenging. Here, we report a pair of rare earth Ce3+-based zero-dimensional (0D) chiral hybrid metal halides (HMHs), R/S-(C14H24N2)2CeBr7, which exhibits characteristic UV emissions derived from the Ce 5d-4f transition. The compounds show simultaneously high photoluminescent quantum yields of (32-39)% and large luminescent dissymmetry factor (|glum|) values of (1.3-1.5)×10-2. Thus, the figures of merits of R/S-(C14H24N2)2CeBr7 are calculated to be (4.5-5.8)×10-3, which are superior to the reported UV-CPL emissive materials. Additionally, nearly 91 % of their PL intensities at 300 K can be well preserved at 380 K (LED operating temperature) without phase transition or decomposition, demonstrating the excellent structural and optical thermal stabilities of R/S-(C14H24N2)2CeBr7. Based on these enantiomers, the fabricated UV-emitting CP-LEDs exhibit high polarization degrees of ±1.0 %. Notably, the UV-CPL generated from the devices can significantly trigger the enantioselective photopolymerization of diacetylene with remarkable stereoselectivity, and consequently yield polymerized products with the anisotropy factors of circular dichroism (gCD) up to ±3.9×10-2, outperforming other UV-CPL materials and demonstrating their great potential as UV-polarized light sources.

Near-Infrared Circularly Polarized Luminescent Physical Unclonable Functions

Distinguished from traditional physical unclonable functions (PUFs), optical PUFs derive their encoded information from the optical properties of materials, offering distinct advantages, including solution processability, material versatility, and tunable luminescence performance. However, existing research on optical PUFs has predominantly centered on visible photoluminescence, while advanced optical PUFs based on higher-level covert light remain unexplored. In this study, we present optical PUFs based on the utilization of the covert light of near-infrared circularly polarized luminescence (NIR-CPL). This interesting property is achieved by incorporating Yb-doped metal halide perovskite nanocrystals (Yb-PeNCs) possessing NIR emission property into chiral imprinted photonic (CIP) films. By employing a solvent immersion method, we successfully integrated Yb-PeNCs into these CIP films, thereby creating an optically unclonable surface. The resulting NIR-CPL emission adds a layer of advanced security to the optical PUF systems. These findings underscore the potential of solution-processable chiral films to play a pivotal role in advancing the next generation of PUFs.

Pathway-Dependent Self-Assembly for Control over Helical Nanostructures and Topochemical Photopolymerization

Pathway-dependent self-assembly, in which a single building block forms two or more types of self-assembled nanostructures, is an important topic due to its mimic to the complexity in biology and manipulation of diverse supramolecular materials. Here, we report a pathway-dependent self-assembly using chiral glutamide derivatives (L or D-PAG), which form chiral nanotwist and nanotube through a cooperative slow cooling and an isodesmic fast cooling process, respectively. Furthermore, pathway-dependent self-assembly can be harnessed to control over the supramolecular co-assembly of PAG with a luminophore β-DCS or a photopolymerizable PCDA. Fast cooling leads to the co-assembled PAG/β-DCS nanotube exhibiting green circularly polarized luminescence (CPL), while slow cooling to nanofiber with blue CPL. Additionally, fast cooling process promotes the photopolymerization of PCDA into a red chiral polymer, whereas slow cooling inhibits the polymerization. This work not only demonstrates the pathway-dependent control over structural characteristics but also highlights the diverse functions emerged from the different assemblies.

Chiral Deep Eutectic Solvents Enable Full-Color and White Circularly Polarized Luminescence from Achiral Luminophores

Herein, chiral deep eutectic solvents (DES) are prepared by lauric acid as hydrogen bond donors (HBD) and chiral menthol as hydrogen bond acceptors (HBA). When achiral fluorescent molecules are dopedin the menthol-based chiral DES, they emit circularly polarized luminescence (CPL) with handedness controlled by the molecular chirality (l or d) of menthol. Remarkably, the strategy is universal and a series of achiral fluorescent molecules can be endowed with CPL activity, showing a full-color and white CPL upon appropriate mixing, which paves the way to prepare white CPL materials. Interestingly, CPL appears only in a certain temperature range in the DES. Variable-temperature spectra and other characterization methods reveal that the H-bond network in the chiral DES plays an important role in inducing CPL. This work unveils how the interior structure as well as the hydrogen-bond network of a chiral DES can transfer its chirality to achiral luminophores for the first time and realizes a full-color and white CPL in a DES.

Recyclable soft photonic crystal film with overall improved circularly polarized luminescence

Existing circularly polarized luminescence materials can hardly satisfy the requirements of both large luminescence dissymmetry factor and high luminescent quantum yield, which hinders their practical applications. Here, we present a soft photonic crystal film embedded with chiral nanopores that possesses excellent circularly polarized luminescence performance with a high luminescence dissymmetry factor as well as a large luminescent quantum yield when loaded with various luminescent dyes. Benefitting from the retention of chiral nanopores imprinted from a chiral liquid crystal arrangement, the chiral soft photonic crystal film can not only endow dyes with chiral properties, but also effectively avoid severe aggregation of guest dye molecules. More importantly, the soft photonic crystal film can be recycled many times by loading and eluting guest dye molecules while retaining good stability as well as circularly polarized luminescence performance, enabling various applications, including smart windows, multi-color circularly polarized luminescence and anticounterfeiting.

Polymer-Enabled Assembly of Au Nanoclusters with Luminescence Enhancement and Macroscopic Chirality

The construction of macroscopic chiral luminescent aggregates with well-defined structures not only contributes to the development of functional materials but also has significant implications for analyzing chiral transfer and amplification in biological systems and self-assembly systems. Meanwhile, achieving water-soluble chiral metal nanoclusters (NCs) with high photoluminescence (PL) intensity through a convenient method remains a challenge. Herein, we reported the enhanced luminescence of gold nanoclusters stabilized by D-/L-penicillamine (D-/L-AuNCs) induced by poly(allylamine hydrochloride) (PAH) through supramolecular self-assembly strategies. FT-IR spectra and zeta potential measurements revealed that supramolecular assembly was driven by the synergistic effect of hydrogen bonds and electrostatic interactions, which effectively limited the intramolecular vibration and rotation of the ligand and reduced nonradiative relaxation, thus improving the luminescence properties of nanoclusters. Interestingly, during the slow solvent evaporation process, chiral entanglement of assemblies was enhanced, forming macroscopic wheat-shaped superstructures. This study enriches the understanding of the self-assembly mechanism of nanoclusters and provides a pathway for constructing NC-based chiroptical materials.

Chiroptical Amplification of Induced Circularly Polarized Luminescence in Nucleotide-Templated Supramolecular Polymer

Efficient circularly polarized luminescence (CPL) from purely organic molecules holds great promise for applications in displays, sensing, and bioimaging. However, achieving high dissymmetry values (glum ) from organic chromophores remains a significant challenge. Herein, we present a bioinspired approach using adenosine triphosphate (ATP)-triggered supramolecular polymerization of a naphthalene diimide-derived monomer (ANSG) to induce CPL with a remarkable glum value of 1.1×10-2 . The ANSG molecules undergo a templated, chiral self-assembly through a cooperative growth mechanism in the presence of ATP, resulting in scrolled nanotubes with aggregation-induced enhanced emission (AIEE) and induced CPL. Furthermore, we demonstrate the concept of chiroptical amplification of induced CPL by efficiently amplifying asymmetry using a mixture of chiral ATP and achiral pyrophosphate. This innovative approach opens numerous opportunities in the emerging field of circularly polarized luminescence.

A transient vesicular glue for amplification and temporal regulation of biocatalytic reaction networks

Regulation of enzyme activity and biocatalytic cascades on compartmentalized cellular components is key to the adaptation of cellular processes such as signal transduction and metabolism in response to varying external conditions. Synthetic molecular glues have enabled enzyme inhibition and regulation of protein-protein interactions. So far, all the molecular glue systems based on covalent interactions operated under steady-state conditions. To emulate dynamic biological processes under dissipative conditions, we introduce herein a transient supramolecular glue with a controllable lifetime. The transient system uses multivalent supramolecular interactions between guanidinium group-bearing surfactants and adenosine triphosphate (ATP), resulting in bilayer vesicle structures. Unlike the conventional chemical agents for dissipative assemblies, ATP here plays the dual role of providing a structural component for the assembly as well as presenting active functional groups to "glue" enzymes on the surface. While gluing of the enzymes on the vesicles achieves augmented catalysis, oscillation of ATP concentration allows temporal control of the catalytic activities similar to the dissipative cellular nanoreactors. We further demonstrate temporal upregulation and control of complex biocatalytic reaction networks on the vesicles. Altogether, the temporal activation of biocatalytic cascades on the dissipative vesicular glue presents an adaptable and dynamic system emulating heterogeneous cellular processes, opening up avenues for effective protocell construction and therapeutic interventions.

Chiral Adaptive Induction of an Achiral Cucurbit[8]uril-Based Supramolecular Organic Framework by Dipeptides in Water

Chiral induction by natural biomolecules can reveal the indispensable role of chiral structures in life and can be used to develop the chirality-sensing biomolecular recognition. Here, we present the synthesis and characterization of an achiral supramolecular organic framework (SOF-1) constructed from cucurbit[8]uril (CB[8]) and hexaphenylbenzene (HPB) derivative (1) in water. Due to the propeller-like rotational chiral conformation of HPB units and the specific recognition properties of CB[8], SOF-1 demonstrates chiral adaptive induction in water when interacting with the N-terminal Trp-/Phe-containing dipeptides including L-TrpX and L-PheX (X is an amino acid residue), respectively, exhibiting contrasting circular dichroism (CD) and circularly polarized luminescence (CPL) spectra. Consequently, SOF-1 has been developed as a supramolecular host and chiroptical sensor capable of recognizing and distinguishing the sequence-opposite Trp-/Phe-containing dipeptide pairs including L-TrpX/L-XTrp and L-PheX/L-XPhe based on the sequence-selective CD responses.

Thermal Annealing Triggered Chirality Inversion through Solvent Migration

Solvent strategy is a powerful tool to manipulate chirality and self-assembly over hierarchical levels, yet the solvent dynamics during thermal annealing in controlling chirality and chiroptical features remain a mystery. Here, we show how solvent migration affects molecular folding and chirality through thermal annealing. Pyrene segments were conjugated to a 2,6-diamide pyridine skeleton, where intramolecular hydrogen bonds anchor the chiral geometry. The orientation of pyrene blades adopted π···π and CH···π stacking, respectively, in organic solvents (dimethyl sulfoxide, DMSO) and aqueous media, leading to the chiroptical inversion. Thermal annealing treatment of the DMSO/H₂O mixture homogenized distribution of solvents that further altered the molecular folding from CH···π to π···π modality. Solvent migration from aggregates to bulky phases was evidenced by the nuclear magnetic resonance and molecular dynamic simulations, leading to the rearrangement of molecular packing with luminescent changes. It realized a consecutive chiroptical inversion using solvent strategy and thermal annealing.

The Role of Surface Groups in Dictating the Chiral-Solvent-Induced Assembly of Carbon Dots into Structures Exhibiting Circularly Polarized Luminescence

Here, the use of achiral nanoparticles and solvent-induced chirality transfer is combined for the making of large structures exhibiting chiroptical properties in the form of circularly polarized luminescence (CPL). The nanoparticles that the authors use are carbon dots (C-Dots) that are known for their bright luminescence and the ability to tune their surface moieties by using different precursors in their synthesis. Here, the result of adding the chiral solvent limonene into an aqueous solution of various C-Dots is explored, differentiated by their surface group. It is shown that only nitrogen-containing C-Dots with amine functional groups see the emergence of a CPL signal and the formation of a large fibrillar assembled structure. The various forces happening in the interface between the C-Dots and the limonene phase and the role of the amine groups in both the chirality transfer interactions and the interactions between C-Dots in the assembly process are discussed, whereas these two processes intertwine with each other. The ability to form fluorescent chiral structures exhibiting CPL from achiral nanoparticles and the understanding of the various interactions in this process are both important to the rationale design of any supramolecular chiral assemblies.

Circularly polarized luminescence in molecular recognition systems: Recent achievements

Circularly polarized luminescence (CPL) dyes are recognized to be new generation materials and have been actively developed. Molecular recognition systems provide nice approaches to novel CPL materials, such as stimuli-responsive switches and chemical sensing materials. CPL may be induced simply by mixing chiral or achiral, luminescent or nonluminescent host and guest; there are several combinations. Molecular recognition can potentially save time and effort to construct well-ordered chiral structures with noncovalent attractive interactions as compared with the multi-step synthesis of covalently bonded dyes. It is a challenging subject to engage molecular recognition events with CPL, and it is important and interesting to see how it is achieved. In fact, simple molecular recognition systems can even enable the fine adjustment of CPL performance and detailed conformational/configurational analysis of the excited state. Here we overview the recent achievements of simple host-guest complexes capable of exhibiting CPL, summarizing concisely the host/guest structures, CPL intensities, and characteristics.

Dimerized Nitrogen-Annulated Perylene Synthesized from 1,6-Diazecine as Chiral Emitter

In this work, nitrogen-annulated perylene (NP) was dimerized into one framework connected by two nitrogen atoms, generating the target molecule of DNP-DA. Owing to the substructure of 1,6-diazecine ten-membered ring, DNP-DA illustrates helical chirality with moderate dissymmetry factor, elevated molecular levels, expanded conjugation and supramolecular interactions with acceptors etc. Notably, DNP-DA represents a limited example of nitrogen-perylene based CPL emitter with g_lum around 6×10^-3 . Intrigued by the facile fabrication via a simple amination-cross coupling sequence and other above advancing features, this work demonstrates the potential generality of utilizing 1,6-diazecine as a chiral unit to build CPL-active materials.

Remarkable White Circularly Polarized Electroluminescence Based on Chiral Co-assembled Helix Nanofiber Emitters

White circularly polarized organic light-emitting diodes (CP-WOLEDs) are of great significance in potential lighting sources and full-color 3D displays. However, High-performance white CP-EL sources are almost unexplored. We have constructed full-color CP-EL devices based on chiral co-assemblies by using three achiral conjugated pyrene-based dyes (BP, w-WP and c-WP) doped with chiral binaphthyl-based enantiomers (S-/R-M) as the EMLs through an intermolecular chirality induction mechanism. (S-/R-M)_0.2 -(c-WP)_0.8 films exhibit regular helix nanofibers under annealing treatment and emit strong white CPL. Significantly, remarkable CP-WOLEDs based on (S-/R-M)_0.2 -(c-WP)_0.8 were achieved with |g_EL | values as high as 6.2×10^-2 and an excellent CRI of 98 at the CIE coordinates of (0.33, 0.33). These are the highest g_EL and CRI values of reported CP-WOLEDs to date. This is the first achievement of CP-WOLEDs based on chiral co-assembled helix nanofiber emitters, and provides a valuable strategy with which to develop white CP-EL for future practical applications.

Circularly Polarized Luminescent Eu4()4 Cage for Enantiomeric Excess and Concentration Simultaneous Determination of Chiral Diamines

Undoubtably, it is challenging to simultaneously determine the identity, enantiomeric excess (ee), and total concentration of an enantiomer by just one optical measurement. Herein, we design a chiral tetrahedron Eu₄(L^R)₄ with circularly polarized luminescence (CPL), which presents highly selective/stereoselective, rapid, and "turn-on" CPL response to chiral diamines, rather than the monoamino compounds, such as monoamines or amino alcohols. By recording the left- and right-CPL intensities of the Eu³⁺ ion at 591 nm, the enantiomeric composition and concentration of chiral diamines can be simultaneously determined by monitoring the g_lum value and total emission intensity (I_L + I_R), respectively. Spectroscopy analyses demonstrate that the variations of g_lum depend on the inversion and maintenance of configuration around the Eu³⁺ ion (Δ ↔ Λ), while the "turn-on" response arises from the raising of the T₁ state of the ligand. The molecule/electron structural variations are proposed from the synergetic supramolecular interactions of NH₂ groups with pendant diols and trifluoroacetyl groups.

Dynamic Timing Control of Molecular Photoluminescent Systems

Dynamic control of molecular photoluminescence offers chemical solutions to designing functional emissive materials. Although stimuli-switchable molecular luminescent systems are well established, how to encode these dynamic emissive systems with a "timing" feature, that is, time-dependent luminescent properties, remains challenging. This Concept aims to summarize the design principles of dynamic timing molecular photoluminescent systems by discussing the state-of-the-art of this topic and the shaping of fabrication strategies at both the molecular and supramolecular levels. An outlook and perspectives are given to outline the future opportunities and challenges in the rational design and potential applications of these smart emissive systems.

Bis-Pyridine-Based Organogel with AIE Effect and Sensing Performance towards Hg2

A novel gelator (1) based on a bis-pyridine derivative was designed and synthesized, which could form stable gels in methanol, ethanol, acetonitrile, ethyl acetate, DMF/H₂O (4/1, v/v) and DMSO/H₂O (4/1, v/v). The self-assembly process of gelator 1 was studied by field emission scanning electron microscopy (FESEM), UV–vis absorption spectroscopy, fluorescence emission spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction and a water contact angle experiment. Gelator 1 exhibited obvious AIE behavior. On the base of its AIE, the gel of 1 could detect Hg²⁺, which resulted in fluorescence quenching and a gel–sol transition. ¹H NMR titration experiments with Hg²⁺ revealed that the metal coordination interaction induced the fluorescence quenching and the breakdown of the noncovalent interaction in the gel system. This research provides a new molecular mode for designing a functional self-assembly gel system.