Ligand-Controlled NiH-Catalyzed Regiodivergent Chain-Walking Hydroalkylation of Alkenes

Palladium-Catalyzed Inward Isomerization Hydroaminocarbonylation of Alkenes

In contrast to the kinetically favored outward isomerization-hydrocarbonylation of alkenes, the disfavored inward isomerization-hydrocarbonylation of alkenes remains an important challenge. Herein, we have developed a novel and effective palladium-catalyzed inward isomerization-hydroaminocarbonylation of unactivated alkenes and aniline hydrochlorides for the formation of synthetically valuable α-aryl carboxylic amides in high yields and high site-selectivities. The high efficiency of the reaction is attributed to a relay catalysis strategy, in which the Markovnikov-favored [PdH]-PtBu3 catalyst is responsible for inward isomerization, while the [PdH]-Ruphos catalyst is responsible for hydroaminocarbonylation of the resulting conjugated aryl alkenes. The reaction exhibits highly functional group tolerance and provides a new method for formal carbonylation of remote C(sp3)-H bond.

Enantioselective Ni-Catalyzed 1,2-Borylalkynylation of Unactivated Alkenes

Enantioselective three-component difunctionalization of alkenes with boron reagents represents an attractive strategy for assembling three-dimensional chiral organoboron compounds. However, regio- and enantiocontrol comprise the pivot challenges in these transformations, which predominantly require the use of activated conjugated alkenes. Herein, by utilizing various carbonyl directing groups, including amides, sulfinamides, ketones, and esters, we succeed in realizing a nickel-catalyzed 1,2-borylalkynylation of unactivated alkenes to enable the simultaneous incorporation of a boron entity and an sp-fragment across the double bond. The products contain boryl, alkynyl, and carbonyl functional groups with orthogonal synthetic reactivities, offering three handles for further derivatization to access valuable intermediates. The utility of this ligand-enabled asymmetric protocol has been highlighted through the late-stage decoration of drug-relevant molecules.

CoH-catalyzed asymmetric remote hydroalkylation of heterocyclic alkenes: a rapid approach to chiral five-membered S- and O-heterocycles

Saturated heterocycles, which incorporate S and O heteroatoms, serve as fundamental frameworks in a diverse array of natural products, bioactive compounds, and pharmaceuticals. Herein, we describe a unique cobalt-catalyzed approach integrated with a desymmetrization strategy, facilitating precise and enantioselective remote hydroalkylation of unactivated heterocyclic alkenes. This method delivers hydroalkylation products with high yields and excellent stereoselectivity, representing good efficiency in constructing alkyl chiral centers at remote C3-positions within five-membered S/O-heterocycles. Notably, the broad scope and good functional group tolerance of this asymmetric C(sp3)-C(sp3) coupling enhance its applicability.

Regiodivergent and Enantioselective Synthesis of Cyclic Sulfones via Ligand-Controlled Nickel-Catalyzed Hydroalkylation

Cyclic sulfones have demonstrated important applications in drug discovery. However, the catalytic and enantioselective synthesis of chiral cyclic sulfones remains challenging. Herein, we develop nickel-catalyzed regiodivergent and enantioselective hydroalkylation of sulfolenes to streamline the synthesis of chiral alkyl cyclic sulfones. The method has broad scope and high functional group tolerance. The regioselectivity can be controlled by ligands only. A neutral PYROX ligand favors C3-alkylation whereas an anionic BOX ligand favors C2-alkylation. This control is kinetic in origin as the C2-bound Ni intermediates are always thermodynamically more stable. Reactivity study of a wide range of relevant Ni intermediates reveal a NiI/NiIII catalytic cycle with a NiII-H species as the resting state. The regio- and enantio-determining step is the insertion of this NiII-H species into 2-sulfolene. This work provides an efficient catalytic method for the synthesis of an important class of organic compounds and enhances the mechanistic understanding of Ni-catalyzed stereoselective hydroalkylation.

Amide-Directed Rhodium-Catalyzed Chain-Walking Hydrothiolation of Internal Alkenes

We developed a rhodium-catalyzed chain-walking hydrothiolation process for internal alkenes, which offers a novel and efficient alternative for C(sp3)-H bond cleavage, while focusing on thiol incorporation. This method exclusively affords N,S-acetals at 36-90% yields. Regioconvergent hydrothiolation significantly improved the effectiveness of this transformation. Preliminary mechanistic investigations revealed that an amide-directing group is essential for regioselective synthesis, underlining its significance in this process.

Kinetically-Controlled Ni-Catalyzed Direct Carboxylation of Unactivated Secondary Alkyl Bromides without Chain Walking

Herein, we report the direct carboxylation of unactivated secondary alkyl bromides enabled by the merger of photoredox and nickel catalysis, a previously inaccessible endeavor in the carboxylation arena. Site-selectivity is dictated by a kinetically controlled insertion of CO2 at the initial C(sp3)-Br site by the rapid formation of Ni(I)-alkyl species, thus avoiding undesired β-hydride elimination and chain-walking processes. Preliminary mechanistic experiments reveal the subtleties of stereoelectronic effects for guiding the reactivity and site-selectivity.

Diphosphine Ligand-Enabled Nickel-Catalyzed Chelate-Assisted Inner-Selective Migratory Hydroarylation of Alkenes

The precise control of the regioselectivity in the transition metal-catalyzed migratory hydrofunctionalization of alkenes remains a big challenge. With a transient ketimine directing group, the nickel-catalyzed migratory β-selective hydroarylation and hydroalkenylation of alkenyl ketones has been realized with aryl boronic acids using alkyl halide as the mild hydride source for the first time. The key to this success is the use of a diphosphine ligand, which is capable of the generation of a Ni(II)-H species in the presence of alkyl bromide, and enabling the efficient migratory insertion of alkene into Ni(II)-H species and the sequent rapid chain walking process. The present approach diminishes organosilanes reductant, tolerates a wide array of complex functionalities with excellent regioselective control. Moreover, this catalytic system could also be applied to the migratory hydroarylation of alkenyl azahetereoarenes, thus providing a general approach for the preparation of 1,2-aryl heteroaryl motifs with wide potential applications in pharmaceutical discovery.

Regiodivergent sp3 C-H Functionalization via Ni-Catalyzed Chain-Walking Reactions

The catalytic translocation of a metal catalyst along a saturated hydrocarbon side chain constitutes a powerful strategy for enabling bond-forming reactions at remote, yet previously unfunctionalized, sp3 C-H sites. In recent years, Ni-catalyzed chain-walking reactions have offered counterintuitive strategies for forging sp3 architectures that would be difficult to accomplish otherwise. Although these strategies have evolved into mature tools for advanced organic synthesis, it was only recently that chemists showed the ability to control the motion at which the catalyst "walks" throughout the alkyl chain. Specialized ligand backbones, additives and a judicious choice of noninnocent functional groups on the side chain have allowed the design of "a la carte" protocols that enable regiodivergent bond-forming scenarios at different sp3 C-H sites with distinct topological surface areas. Given the inherent interest in increasing the fraction of sp3 hybridized carbons in medicinal chemistry, Ni-catalyzed regiodivergent chain-walking reactions might expedite the access to target leads in drug discovery campaigns.

Ligand-modulated nickel-catalyzed regioselective silylalkylation of alkenes

Organosilicon compounds have shown tremendous potential in drug discovery and their synthesis stimulates wide interest. Multicomponent cross-coupling of alkenes with silicon reagents is used to yield complex silicon-containing compounds from readily accessible feedstock chemicals but the reaction with simple alkenes remains challenging. Here, we report a regioselective silylalkylation of simple alkenes, which is enabled by using a stable Ni(II) salt and an inexpensive trans-1,2-diaminocyclohexane ligand as a catalyst. Remarkably, this reaction can tolerate a broad range of olefins bearing various functional groups, including alcohol, ester, amides and ethers, thus it allows for the efficient and selective assembly of a diverse range of bifunctional organosilicon building blocks from terminal alkenes, alkyl halides and the Suginome reagent. Moreover, an expedient synthetic route toward alpha-Lipoic acid has been developed by this methodology.

Iridium-Catalyzed Migratory Terminal C(sp3)-H Amidation of Heteroatom-Substituted Internal Alkenes via Olefin Chain Walking

Hydroamination facilitated by metal hydride catalysis is an appealing synthetic approach to access valuable nitrogen-containing compounds from readily available unsaturated hydrocarbons. While high regioselectivity can be achieved usually for substrates bearing polar chelation groups, the reaction involving simple alkenes frequently provides nonselective outcomes. Herein, we report an iridium-catalyzed highly regioselective terminal C(sp3)-H amidation of internal alkenes utilizing dioxazolones as an amino source via olefin chain walking. Most notably, this mechanistic motif of double bond migration to the terminal position operates not only with dialkyl-substituted simple alkenes including styrenes but also with heteroatom-substituted olefins such as enol ethers, vinyl silanes, and vinyl borons, thus representing the first example of the terminal methyl amidation of the latter type of alkenes through a nondissociative chain walking process.

Electrochemical NiH-Catalyzed C(sp3 )-C(sp3 ) Coupling of Alkyl Halides and Alkyl Alkenes

Herein, an electrochemically driven NiH-catalyzed reductive coupling of alkyl halides and alkyl alkenes for the construction of Csp3 -Csp3 bonds is firstly reported. Notably, alkyl halides serve dual function as coupling substrates and as hydrogen sources to generate NiH species under electrochemical conditions. The tunable nature of this reaction is realized by introducing an intramolecular coordinating group to the substrate, where the product can be easily adjusted to give the desired branched products. The method proceeds under mild conditions, exhibits a broad substrate scope, and affords moderate to excellent yields with over 70 examples, including late-stage modification of natural products and drug derivatives. Mechanistic insights offer evidence for an electrochemically driven coupling process. The sp3 -carbon-halogen bonds can be activated through single electron transfer (SET) by the nickel catalyst in its low valence state, generated by cathodic reduction, and the generation of NiH species from alkyl halides is pivotal to this transformation.

Iridium-Catalyzed Remote Site-Switchable Hydroarylation of Alkenes Controlled by Ligands

An iridium-catalyzed remote site-switchable hydroarylation of alkenes was reported, delivering the products functionalized at the subterminal methylene and terminal methyl positions on an alkyl chain controlled by two different ligands, respectively, in good yields and with good to excellent site-selectivities. The catalytic system showed good functional group tolerance and a broad substrate scope, including unactivated and activated alkenes. More importantly, the regioconvergent transformations of mixtures of isomeric alkenes were also successfully realized. The results of the mechanistic studies demonstrate that the reaction undergoes a chain-walking process to give an [Ar-Ir-H] complex of terminal alkene. The subsequent processes proceed through the modified Chalk-Harrod-type mechanism via the migratory insertion of terminal alkene into the Ir-C bond followed by C-H reductive elimination to afford the hydrofunctionalization products site-selectively.

Nickel-Catalyzed Remote Asymmetric Hydroalkylation of Alkenyl Ethers to Access Ethers of Chiral Dialkyl Carbinols

Site- and enantio-selective alkyl-alkyl bond formation is privileged in the retrosynthetic analysis due to the universality of sp³-hybridized carbon atoms in organic molecules. Herein, we report a nickel-catalyzed remote asymmetric hydroalkylation of alkenyl ethers via synchronous implementation of alkene isomerization and enantioselective C(sp³)-C(sp³) bond formation. Regression analysis of catalyst structure-activity relationships accelerates the rational ligand modification through modular regulation. This reaction has several advantages for synthesizing chiral dialkyl carbinols and their ether derivatives, including the broad substrate scope, good functional group tolerance, excellent regioselectivity (>20:1 regioisomeric ratio), and high enantioselectivity (up to 95% enantiomeric excess).

Mechanism and Origins of Diastereo- and Regioselectivities of Palladium-Catalyzed Remote Diborylative Cyclization of Dienes via Chain-Walking Strategy

Density functional theory calculations have been performed to investigate the palladium-catalyzed remote diborylative cyclization of dienes. The computations reveal that the reaction proceeds through a rarely explored Pd(II)/Pd(IV) catalytic cycle, and the formal σ-bond metathesis between the alkylpalladium intermediate and B₂ pin₂ occurs via the pathway of the B-B oxidative addition/C-B reductive elimination involving the high-valent Pd(IV) species. The diastereoselectivity is determined by the migratory insertion into the Pd-C bond, which is mainly due to the combination of the torsional strain effect, steric repulsion and C-H-O hydrogen-bonding interaction. The steric hindrance around the reacting carbon group in the C-B reductive elimination turns out to be a key factor to provide the driving force of the chain walking of the Pd center to the terminal primary carbon position, enabling the experimentally observed remote regioselectivity.

Nickel-Catalyzed 1,2-Arylboration of Unactivated Alkenes to Access Boryl-Functionalized Aliphatic Amines

We report herein a three-component 1,2-arylboration of alkenyl amines bearing a cleavable picolinamide directing group. With aryl halides as electrophiles and B₂Pin₂ as nucleophiles, a wide range of alkenes could be converted into valuable boryl-functionalized aliphatic amines. The reaction proceeds with high levels of chemo- and regiocontrol and exhibits high functional group tolerance. In addition, the pinacol boronic ester group could undergo various transformations, indicating that the protocol could potentially provide a platform for versatile regioselective difunctionalization of alkenyl amines.