Iridium nanoparticles supported on polyaniline nanotubes for peroxidase mimicking towards total antioxidant capacity assay of fruits and vegetables

In this study, a straightforward approach is presented for the first time to anchor Ir nanoparticles on the surface of uniform polyaniline (PANi) nanotubes (NTs), which can be used as an efficient peroxidase (POD)-like catalyst. The morphology and chemical structure of the PANi-Ir nanocomposite are characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffractometer (XRD), Raman and X-ray photoelectron spectroscopy (XPS) measurements. Owing to the strong interaction between Ir nanoparticles and PANi, a remarkable catalytic enhancement is achieved compared to the bare Ir black catalyst and individual PANi NTs, dominating withan electron transfer mechanism. Furthermore, an efficient colorimetric sensor for ascorbic acid (AA) is developed with a low detection limit of 1.0 μM (S/N = 3), and a total antioxidant capacity (TAC) sensing platform is also constructed for the rigorous detection and analysis of fruits and vegetables.

X-ray production cross sections for Ir and Bi M-subshells induced by electron impact

M-subshell X-ray production cross sections were indirectly measured for Ir and Bi targets irradiated with monoenergetic electron beams. The projectile energy range ran from 2.2 to 28 keV, impinging on Ir and Bi pure bulk targets in a scanning electron microscope. The resulting X-ray emission spectra were acquired with an energy dispersive spectrometer, and processed afterwards by means of a robust parameter optimization procedure developed previously. X-ray production cross sections were finally obtained through an approach involving an analytical prediction for the emission spectra, which relies on the ionization depth distribution function. The values obtained by this approach were compared with empirical and theoretical predictions, appealing to different relaxation data taken from the literature.

A Semi-Automated, High-Throughput Approach for the Synthesis and Identification of Highly Photo-Cytotoxic Iridium Complexes

The discovery of new compounds with pharmacological properties is usually a lengthy, laborious and expensive process. Thus, there is increasing interest in developing workflows that allow for the rapid synthesis and evaluation of libraries of compounds with the aim of identifying leads for further drug development. Herein, we apply combinatorial synthesis to build a library of 90 iridium(III) complexes (81 of which are new) over two synthesise-and-test cycles, with the aim of identifying potential agents for photodynamic therapy. We demonstrate the power of this approach by identifying highly active complexes that are well-tolerated in the dark but display very low nM phototoxicity against cancer cells. To build a detailed structure-activity relationship for this class of compounds we have used density functional theory (DFT) calculations to determine some key electronic parameters and study correlations with the experimental data. Finally, we present an optimised semi-automated synthesise-and-test protocol to obtain multiplex data within 72 hours.

Molecular Dihydrogen Activation by (C5Me5)M/N (M=Rh, Ir) Transition Metal Frustrated Lewis Pairs: Reversible Proton Migration to, and Proton Abstraction from, the C5Me5 Ligand

The masked transition-metal frustrated Lewis pairs [Cp*M(κ3N,N',N''-L)][SbF6] (Cp*=η5-C5Me5; M=Ir, 1, Rh, 2; HL=pyridinyl-amidine ligand) reversibly activate H2 under mild conditions rendering the hydrido derivatives [Cp*MH(κ2N,N'-HL)][SbF6] observed as a mixture of the E and Z isomers at the amidine C=N bond (M=Ir, 3Z, 3E; M=Rh, 4Z, 4E). DFT calculations indicate that the formation of the E isomers follows a Grotthuss type mechanism in the presence of water. A mixture of Rh(I) isomers of formula [(Cp*H)Rh(κ2N,N'-HL)][SbF6] (5 a-d) is obtained by reductive elimination of Cp*H from 4. The formation of 5 a-d was elucidated by means of DFT calculations. Finally, when 2 reacts with D2, the Cp* and Cp*H ligands of the resulting rhodium complexes 4 and 5, respectively, are deuterated as a result of a reversible hydrogen abstraction from the Cp* ligand and D2 activation at rhodium.

Unlocking the Asymmetric Hydrogenation of Tetrasubstituted Acyclic Enones

Asymmetric hydrogenation (AH) of tetrasubstituted olefins generating two stereocenters is still an open topic. There are only a few reports on the AH of tetrasubstituted olefins with conjugated functional groups, while this process can create useful intermediates for the subsequent elaboration of relevant end products. Most of the tetrasubstituted olefins successfully submitted to AH belong to a small number of functional classes; remarkably, the AH of tetrasubstituted acyclic enones still represents an unsolved challenge. Herein, we disclose a class of air-stable Ir-P,N catalysts, prepared in three steps from commercially available amino alcohols, that can hydrogenate, in minutes, a wide range of electronically and sterically diverse acyclic tetrasubstituted enones (including exocyclic ones) with high yields and high enantioselectivities. The factors responsible for the excellent selectivities were elucidated by combining deuterogenation experiments and theoretical calculations. The calculations indicated that the reduction follows an IrI /IrIII mechanism, in which enantioselectivity is controlled in the first migratory insertion of the hydride to the most electrophilic olefinic Cβ and the formation of the hydrogenated product via reductive elimination takes place prior to the coordination of dihydrogen and the subsequent oxidative addition. The potential of the new catalytic systems is demonstrated by the derivatization of hydrogenation products.

Phototoxicity of cyclometallated Ir(III) complexes bearing a thio-bis-benzimidazole ligand, and its monodentate analogue, as potential PDT photosensitisers in cancer cell killing

Two novel cyclometallated iridium(III) complexes have been prepared with one bidentate or two monodentate imidazole-based ligands, 1 and 2, respectively. The complexes showed intense emission with long lifetimes of the excited state. Femtosecond transient absorption experiments established the nature of the lowest excited state as 3IL state. Singlet oxygen generation with good yields (40% for 1 and 82% for 2) was established by detecting 1O2 directly, through its emission at 1270 nm. Photostability studies were also performed to assess the viability of the complexes as photosensitizers (PS) for photodynamic therapy (PDT). Complex 1 was selected as a good candidate to investigate light-activated killing of cells, whilst complex 2 was found to be toxic in the dark and unstable under light. Complex 1 demonstrated high phototoxicity indexes (PI) in the visible region, PI > 250 after irradiation at 405 nm and PI > 150 at 455 nm, in EJ bladder cancer cells.

Thermal-driven Orderly Assembly of Ir-atomic Chains on α-MnO2 with Enhanced Performance for Acidic Oxygen Evolution

The development of acid-stable oxygen evolution reaction electrocatalysts is essential for high-performance acidic water electrolysis. Herein, we report the results of one-dimensional (1D) nanorods (NRs) IrCeMnO@Ir containing ~20 wt . % Iridium (Ir) as an efficient anode electrocatalyst, synthesized via a one-step cation exchange strategy. Owing to the presence of 1D channels of the nanorod architecture and the unique electronic structure, the IrCeMnO@Ir exhibited 69 folds more mass activity than that of commercial IrO2 as well as over 400 h stability with only a 20 mV increase in overpotential. DFT calculations and control experiments demonstrated that CeO2 serves as an electron buffer to accelerate the kinetics of the rate-determined step for the significantly enhanced activity and suppress the over-oxidation of Ir species as well as their dissolution for impressively promoted stability under practical conditions. Our work opens up a feasible strategy to boost OER activity and stability simultaneously.

Controlled cluster expansion at a Zintl cluster surface

Reaction of the tris-hypersilyl nonagermanide Zintl cluster salt, K[Ge9 (Hyp)3 ] (Hyp=Si(SiMe3 )3 ) with [Rh(η2 ,η2 -L)Cl]2 (L=1,5-cyclooctadiene, COD; norbornadiene, NBD) afforded eleven- and twelve-vertex homo-multimetallic clusters by cluster core expansion. Using a stepwise procedure, starting from the Zintl cluster [Rh(COD){Ge9 (Hyp)3 }] and [Ir(COD)Cl]2 , this methodology was expanded for the synthesis of eleven-vertex hetero-multimetallic clusters. A mechanism for the formation of these first examples of closo eleven-vertex Zintl clusters is proposed, informed by density functional theory calculations.

Photostable and high-brightness aggregation-induced emission of iridium luminogen achieving reliable and sensitive continuous luminescent quantification of molecular oxygen

Online continuous luminescent oxygen quantification requires both high-brightness luminescence and superior photobleaching resistance of luminogens to afford the requisite level of sensitivity and operational stability, which remains a challenge. Herein, a fluorine-free design strategy of incremental rotors for preparing iridium luminogens with excellent photobleaching resistance and high-brightness aggregation-induced emission (AIE) is presented. The incremental rotors gradually improve the rotational activity of substituents, efficaciously activating the AIE with synchronously improved aggregation-state luminescence efficiency, which is theoretically confirmed by the variations of dipole moments and experimentally verified by the luminescent lifetimes. Moreover, the introduction of triphenylamine significantly improves the photobleaching resistance of iridium luminogens. Subsequently, by optimizing the loading capacity of the iridium luminogen, the improvement of high-brightness AIE on the oxygen sensitivity of ethocel films is successfully observed. Thickness attenuation of ethocel films dramatically shortens the quenching/recovery response to 4.7 s. Importantly, owing to the exceptional photobleaching resistance of the iridium luminogen, distinguished photo-fatigue resistance with operational stability is exhibited by the ethocel film with no luminescence attenuation during 8000 s continuous oxygen quantification.

Directly Knitted Hierarchical Porous Organometallic Polymer-Based Self-Supported Single-Site Catalyst for CO2 Hydrogenation in Water

In recent times, heterogenization of homogeneous molecular catalysts onto various porous solid support structures has attracted significant research focus as a method for combining the advantages of both homogeneous as well as heterogeneous catalysis. The design of highly efficient, structurally robust and reusable heterogenized single-site catalysts for the CO2 hydrogenation reaction is a critical challenge that needs to be accomplished to implement a sustainable and practical CO2 -looped renewable energy cycle. This study demonstrated a heterogenized catalyst [Ir-HCP-(B/TPM)] containing a molecular Ir-abnormal N-heterocyclic carbene (Ir-aNHC) catalyst self-supported by hierarchical porous hyper-crosslinked polymer (HCP), in catalytic hydrogenation of CO2 to inorganic formate (HCO2 - ) salt that is a prospective candidate for direct formate fuel cells (DFFC). By employing this unique and first approach of utilizing a directly knitted HCP-based organometallic single-site catalyst for CO2 -to-HCO2 - in aqueous medium, extremely high activity with a single-run turnover number (TON) up to 50816 was achieved which is the highest so far considering all the heterogeneous catalysts for this reaction in water. Additionally, the catalyst featured excellent reusability furnishing a cumulative TON of 285400 in 10 cycles with just 1.6 % loss in activity per cycle. Overall, the new catalyst displayed attributes that are important for developing tangible catalysts for practical applications.

An Aqueous Redox Flow Battery Using CO2 as an Active Material with a Homogeneous Ir Catalyst

For the application of CO2 as an energy storage material, a H2 storage system has been proposed based on the interconversion of CO2 and formic acid (or formate). However, energy losses are inevitable in the conversion of electrical energy to H2 as chemical energy (≈70 % electrical efficiency) and H2 to electrical energy (≈40 % electrical efficiency). To overcome these significant energy losses, we developed a system based on the interconversion of CO2 and formate for the direct storage and generation of electricity. In this paper, we report an aqueous redox flow battery system using homogeneous Ir catalysts with CO2 -formate redox pair. The system exhibited a maximum discharge capacity of 10.5 mAh (1.5 Ah L-1 ), capacity decay of 0.2 % per cycle, and total turnover number of 2550 after 50 cycles. During charging-discharging, in situ fluorescence X-ray absorption fine structure spectroscopy based on an online setup indicated that the active species was in a high valence state of IrIV .

Electrocatalytic Water Oxidation Activity-Stability Maps for Perovskite Oxides Containing 3d, 4d and 5d Transition Metals

Improving catalytic activity without loss of catalytic stability is one of the core goals in search of low-iridium-content oxygen evolution electrocatalysts under acidic conditions. Here, we synthesize a family of 66 SrBO3 perovskite oxides (B=Ti, Ru, Ir) with different Ti : Ru : Ir atomic ratios and construct catalytic activity-stability maps over composition variation. The maps classify the multicomponent perovskites into chemical groups with distinct catalytic activity and stability for acidic oxygen evolution reaction, and highlights a chemical region where high catalytic activity and stability are achieved simultaneously at a relatively low iridium level. By quantifying the extent of hybridization of mixed transition metal 3d-4d-5d and oxygen 2p orbitals for multicomponent perovskites, we demonstrate this complex interplay between 3d-4d-5d metals and oxygen atoms in governing the trends in both activity and stability as well as in determining the catalytic mechanism involving lattice oxygen or not.

Iridium(III)-Catalyzed Intermolecular C(sp3 )-H Amidation for the Synthesis of Chiral 1,2-Diamines

Chiral 1,2-diamines are privileged scaffolds among bioactive natural products, active pharmaceutical ingredients, ligands for transition-metal-based asymmetric catalysis and organocatalysts. Despite this interest, the construction of chiral 1,2-diamine motifs still remains a challenge. To address this, an iridium(III)-catalyzed intermolecular C(sp3 )-H amidation reaction was developed. This method relies on the design of a new, cheap and cleavable exo-protecting/directing group derived from camphorsulfonic acid, which is directly installed from easily accessible precursors, and furnishes scalemic free 1,2-diamines upon cleavage of both nitrogen substituents. It was found applicable to both α-secondary and α-tertiary-1,2-diamines, for which a two-step protocol involving intermolecular olefin hydroamination and C(sp3 )-H amidation was developed. Kinetic and computational studies provided insights into the observed reactivity difference between pairs of diastereoisomeric substrates.

An Asymmetric Hydrogenation/N-Alkylation Sequence for a Step-Economical Route to Indolizidines and Quinolizidines

The direct catalytic asymmetric hydrogenation of pyridines for the synthesis of piperidines remains a challenge. Herein, we report a one-pot asymmetric hydrogenation of pyridines with subsequent N-alkylation using a traceless Brønsted acid activation strategy. Catalyzed by an iridium-BINAP complex, the substrates undergo ketone reduction, cyclization and pyridine hydrogenation in sequence to form indolizidines and quinolizidines. The absolute configuration of the stereocenter of the alcohol is retained and influences the formation of the second stereocenter. Experimental and theoretical mechanistic studies reveal that the chloride anion and certain noncovalent interactions govern the stereoselectivity of the cascade reaction throughout the catalytic process.

Iridium-Catalyzed Remote Site-Switchable Hydroarylation of Alkenes Controlled by Ligands

An iridium-catalyzed remote site-switchable hydroarylation of alkenes was reported, delivering the products functionalized at the subterminal methylene and terminal methyl positions on an alkyl chain controlled by two different ligands, respectively, in good yields and with good to excellent site-selectivities. The catalytic system showed good functional group tolerance and a broad substrate scope, including unactivated and activated alkenes. More importantly, the regioconvergent transformations of mixtures of isomeric alkenes were also successfully realized. The results of the mechanistic studies demonstrate that the reaction undergoes a chain-walking process to give an [Ar-Ir-H] complex of terminal alkene. The subsequent processes proceed through the modified Chalk-Harrod-type mechanism via the migratory insertion of terminal alkene into the Ir-C bond followed by C-H reductive elimination to afford the hydrofunctionalization products site-selectively.

Morphological and Coordination Modulations in Iridium Electrocatalyst for Robust and Stable Acidic OER Catalysis

Proton exchange membrane water splitting (PEMWS) technology has high-level current density, high operating pressure, small electrolyzer-size, integrity, flexibility, and has good adaptability to the volatility of wind power and photovoltaics, but the development of both active and high stability of the anode electrocatalyst in acidic environment is still a huge challenge, which seriously hinders the promotion and application of PEMWS. In recent years, researchers have made tremendous attempts in the development of high-quality active anode electrocatalyst, and we summarize some of the research progress made by our group in the design and synthesis of PEMWS anode electrocatalysts with different nanostructures, and makes full use of electrocatalytic activity points to increase the inherent activity of Iridium (Ir) sites, and provides optimization strategies for the long-term non-decay of catalysts under high anode potential in acidic environments. At this stage, these research advances are expected to facilitate the research and technological progress of PEMWS, and providing some research ideas and references for future research on efficient and inexpensive PEMWS anode electrocatalysts.

Exosome camouflaged coordination-assembled Iridium(III) photosensitizers for apoptosis-autophagy-ferroptosis induced combination therapy against melanoma

Melanoma represents the most fatal form of skin cancer due to its resistance mechanisms and high capacity for the development of metastases. Among other medicinal techniques, photodynamic therapy is receiving increasing attention. Despite promising results, the application of photodynamic therapy is inherently limited due to interference from melanin, poor tissue penetration of photosensitizers, low loading into drug delivery systems, and a lack of tumor selectivity. To overcome these limitations, herein, the coordination-driven assembly of Ir(III) complex photosensitizers with Fe(III) ions into nanopolymers for combined photodynamic therapy and chemodynamic therapy is reported. While remaining stable under physiological conditions, the nanopolymers dissociated in the tumor microenvironment. Upon exposure to light, the Ir(III) complexes produced singlet oxygen and superoxide anion radicals, inducing cell death by apoptosis and autophagy. The Fe(III) ions were reduced to Fe(II) upon depletion of glutathione and reduction of the GPX4 levels, triggering cell death by ferroptosis. To provide tumor selectivity, the nanopolymers were further camouflaged with exosomes. The generated nanoparticles were found to eradicate a melanoma tumor as well as inhibit the formation of metastases inside a mouse model.

Ligand-Free Ultrasmall Recyclable Iridium(0) Nanoparticles for Regioselective Aromatic Hydrogenation of Phosphine Oxide Scaffolds: An Easy Access to New Phosphine Ligands

Herein, we developed the recyclable ligand-free iridium (Ir)-hydride based Ir0 nanoparticles (NPs) for the first regioselective partial hydrogenation of PV -substituted naphthalenes. Both the isolated and in situ generated NPs are catalytically active. A control nuclear magnetic resonance (NMR) study revealed the presence of metal-surface-bound hydrides, most likely formed from Ir0 species. A control NMR study confirmed that hexafluoroisopropanol as a solvent was accountable for substrate activation via hydrogen bonding. High-resolution transmission electron microscopy of the catalyst supports the formation of ultrasmall NPs, and X-ray photoelectron spectroscopy confirmed the dominance of Ir0 in the NPs. The catalytic activity of NPs is broad as showcased by highly regioselective aromatic ring reduction in various phosphine oxides or phosphonates. The study also showcased a novel pathway toward preparing bis(diphenylphosphino)-5,5',6,6',7,7',8,8'-octahydro-1,1'-binaphthyl (H8 -BINAP) and its derivatives without losing enantioselectivity during catalytic events.

Dual-emissive Iridium(III) Complexes as Phosphorescent Probes with Orthogonal Responses to Analyte Binding and Oxygen Quenching

Phosphorescent probes often show sensitive response toward analytes at a specific wavelength. However, oxygen quenching usually occurs at the same wavelength and thus hinders the accurate detection of analytes. In this study, we have developed dual-emissive iridium(III) complexes that exhibit phosphorescence responses to copper(II) ions at a wavelength distinct from that where oxygen quenching occurs. The complexes displayed colorimetric phosphorescence response in aqueous solutions under different copper(II) and oxygen conditions. In cellular imaging, variation in oxygen concentration over a large range from 5 % to 80 % can modulate the intensity and lifetime of green phosphorescence without affecting the response of red phosphorescence toward intracellular copper(II) ions.

Enantioselective Synthesis of N-N Biaryl Atropisomers through Iridium(I)-Catalyzed C-H Alkylation with Acrylates

Enantioselective synthesis of N-N biaryl atropisomers is an emerging area but remains underexplored. The development of efficient synthesis of N-N biaryl atropisomers is in great demand. Herein, the construction of N-N biaryl atropisomers through iridium-catalyzed asymmetric C-H alkylation is reported for the first time. In the presence of readily available Ir precursor and Xyl-BINAP, a variety of axially chiral molecules based on indole-pyrrole skeleton were obtained in good yields (up to 98 %) with excellent enantioselectivity (up to 99 % ee). In addition, N-N bispyrrole atropisomers could also be synthesized in excellent yields and enantioselectivity. This method features perfect atom economy, wide substrate scope, and multifunctionalized products allowing diverse transformations.

In situ Generated Iridium Nanoparticles as Hydride Donors in Photoredox-Catalyzed Hydrogen Isotope Exchange Reactions with Deuterium and Tritium Gas

We have studied the photoredox-catalyzed hydrogen isotope exchange (HIE) reaction with deuterium or tritium gas as isotope sources and in situ formed transition metal nanoparticles as hydrogen atom transfer pre-catalysts. By this means we have found synergistic reactivities applying two different HIE mechanisms, namely photoredox-catalyzed and CH-functionalization HIE leading to the synthesis of highly deuterated complex molecules. Finally, we adopted these findings successfully to tritium chemistry.

Atomic-Scale Identification of Nitrogen Dopants in Graphene on Ir(111) and Ru(0001)

Nitrogen (N) doped graphene materials have been synthesized using the sole precursor adenine on the Ir(111) and Ru(0001) surfaces. X-ray photoelectron spectroscopy and scanning tunneling microscopy (STM) have been used to characterize the obtained N-doped graphene materials. Several graphitic and pyridinic N dopants have been identified on the atomic scale by combining STM measurements and STM simulations based on density functional theory calculations.&#xD.

High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Creation of AIEgens with high brightness is compactly related to acquiring optimum AIE capabilities and still faces challenges. This study proposes an ingenious structurally regulative approach for preparing ultrabright AIEgens, taking iridium complexes as the model. The incremental rotational activity of substituents obtained by fine adjustment of the stereoscopic configuration efficaciously activates the AIE of iridium complexes and synchronously imparts high-brightness luminescence. Subsequently, benefitting from the ultrabright AIE, high-resolution visualization of latent fingerprints (LFPs) is achieved on diverse substrates by transient immersion in a solution of the AIE-active iridium complex (Ir3) for 60 s. The LFPs stained by Ir3 are integral and distinct enough to possess level 1-3 detail features, which allow precisely realizing personal identification. The LFP photograph emerges inconspicuous attenuation of contrast when aged under ambient light for 10 days and then being continuously irradiated with high-power ultraviolet light for 1 h, reflecting extraordinary aging resistance. Notably, the ultrabright AIE of Ir3 with room-temperature phosphorescence feature successfully achieves enhanced visualization of local fingerprint details with ultrahigh contrast. This LFP visualization protocol based on the ultrabright AIEgens is practical and provides a reliable solution for forensic investigations in actual scenarios.

One-Pot Synthesis of Chiral 1-Aryl-2-Aminoethanols via Ir-Catalyzed Asymmetric Hydrogenation

A straightforward synthesis approach to chiral 1-aryl-2-aminoethanols via the one-pot asymmetric hydrogenation catalyzed by Ir catalyst was developed. This tandem process involves the in situ generation of α-amino ketones via the nucleophilic substitution of α-bromoketones with amines and the Ir-catalyzed asymmetric hydrogenation of ketone intermediates to provide diverse enantiomerically enriched β-amino alcohols. The excellent yields and enantioselectivities (up to 96% yield and up to >99% ee) with a wide substrate scope in this one-pot strategy were obtained.

Mitochondria as a target of third row transition metal-based anticancer complexes

In pursuit of better treatment options for malignant tumors, metal-based complexes continue to show promise as attractive chemotherapeutics due to tunability, novel mechanisms, and potency exemplified by platinum agents. The metabolic character of tumors renders the mitochondria and other metabolism pathways fruitful targets for medicinal inorganic chemistry. Cumulative understanding of the role of mitochondria in tumorigenesis has ignited research in mitochondrial targeting metal-based complexes to overcome resistance and inhibit tumor growth with high potency and selectivity. Here, we discuss recent progress made in third row transition metal-based mitochondrial targeting agents with the goal of stimulating an active field of research toward new clinical anticancer agents and the elucidation of novel mechanisms of action.

Iridium-Catalyzed ortho-Selective Borylation of Aromatic Amides Enabled by 5-Trifluoromethylated Bipyridine Ligands

Iridium-catalyzed borylations of aromatic C-H bonds are highly attractive transformations because of the diversification possibilities offered by the resulting boronates. These transformations are best carried out using bidentate bipyridine or phenanthroline ligands, and tend to be governed by steric factors, therefore resulting in the competitive functionalization of meta and/or para positions. We have now discovered that a subtle change in the bipyridine ligand, namely, the introduction of a CF₃ substituent at position 5, enables a complete change of regioselectivity in the borylation of aromatic amides, allowing the synthesis of a wide variety of ortho-borylated derivatives. Importantly, thorough computational studies suggest that the exquisite regio- and chemoselectivity stems from unusual outer-sphere interactions between the amide group of the substrate and the CF₃ -substituted aryl ring of the bipyridine ligand.

Secondary Phosphine Sulfide-Enabled Iridium-Catalyzed Asymmetric Allylic Substitution

An iridium-catalyzed asymmetric synthesis of branched allylic phosphine compounds under mild conditions is reported. Products bearing various functional groups can be synthesized with excellent stereoselectivity (up to 99.9 % ee) and regioselectivity. The employment of phosphine sulfides with relatively low deactivation capacity against metal catalysts is crucial for the success of this reaction.

Supported Iridium-based Oxygen Evolution Reaction Electrocatalysts - Recent Developments

The commercialization of acidic proton exchange membrane water electrolyzers (PEMWE) is heavily hindered by the price and scarcity of oxygen evolution reaction (OER) catalyst, i. e. iridium and its oxides. One of the solutions to enhance the utilization of this precious metal is to use a support to distribute well dispersed Ir nanoparticles. In addition, adequately chosen support can also impact the activity and stability of the catalyst. However, not many materials can sustain the oxidative and acidic conditions of OER in PEMWE. Hereby, we critically and extensively review the different materials proposed as possible supports for OER in acidic media and the effect they have on iridium performances.

Fluorescent half-sandwich iridium picolinamidate complexes for in-cell visualization

In this work, we report on the development of fluorescent half-sandwich iridium complexes using a fluorophore attachment strategy. These constructs consist of pentamethylcyclopentadienyl (Cp*) iridium units ligated by picolinamidate donors conjugated to green-emitting boron-dipyrromethene (bodipy) dyes. Reaction studies in H₂O/THF mixtures showed that the fluorescent Ir complexes were active as catalysts for transfer hydrogenation, with activities similar to that of their non-fluorescent counterparts. The iridium complexes were taken up by NIH-3T3 mouse fibroblast cells, with 50% inhibition concentrations ranging from ~20-70 μM after exposure for 3 h. Visualization of the bodipy-functionalized Ir complexes in cells using fluorescence microscopy revealed that they were localized in the mitochondria and lysosome but not the nucleus. These results indicate that our fluorescent iridium complexes could be useful for future biological studies requiring intracellular catalyst tracking.

A Biodegradable Iridium(III) Coordination Polymer for Enhanced Two-Photon Photodynamic Therapy Using an Apoptosis-Ferroptosis Hybrid Pathway

The clinical application of photodynamic therapy is hindered by the high glutathione concentration, poor cancer-targeting properties, poor drug loading into delivery systems, and an inefficient activation of the cell death machinery in cancer cells. To overcome these limitations, herein, the formulation of a promising Ir^III complex into a biodegradable coordination polymer (IrS NPs) is presented. The nanoparticles were found to remain stable under physiological conditions but deplete glutathione and disintegrate into the monomeric metal complexes in the tumor microenvironment, causing an enhanced therapeutic effect. The nanoparticles were found to selectively accumulate in the mitochondria where these trigger cell death by hybrid apoptosis and ferroptosis pathways through the photoinduced production of singlet oxygen and superoxide anion radicals. This study presents the first example of a coordination polymer that can efficiently cause cancer cell death by apoptosis and ferroptosis upon irradiation, providing an innovative approach for cancer therapy.

A New Strategy to Fight Metallodrug Resistance: Mitochondria-Relevant Treatment through Mitophagy to Inhibit Metabolic Adaptations of Cancer Cells

Metabolic adaptations can help cancer cells to escape from chemotherapeutics, mainly involving autophagy and ATP production. Herein, we report a new rhein-based cyclometalated Ir^III complex, Ir-Rhein, that can accurately target mitochondria and effectively inhibit metabolic adaptations. The complex Ir-Rhein induces severe mitochondrial damage and initiates mitophagy to reduce the number of mitochondria and subsequently inhibit both mitochondrial and glycolytic bioenergetics, which eventually leads to ATP starvation death. Moreover, Ir-Rhein can overcome cisplatin resistance. Co-incubation experiment, 3D tumor spheroids experiment and transcriptome analysis reveal that Ir-Rhein shows promising antiproliferation performance for cisplatin-resistant cancer cells with the regulation of platinum resistance-related transporters. To our knowledge, this is a new strategy to overcome metallodrug resistance with a mitochondria-relevant treatment.

Atom Swapping on Aromatic Rings: Conversion from Phosphinine Pincer Metal Complexes to Metallabenzenes Triggered by O2 Oxidation

Herein, we report a novel method for the synthesis of metallabenzenes by swapping the phosphorus atom in an aromatic phosphinine ring with transition metal fragments. The oxidation of a phosphine-phosphinine-phosphine pincer iridium complex by O₂ triggered the replacement of the phosphorus atom of the phosphinine ring by an iridium fragment to afford iridabenzene. Dianionic rhodabenzene was also synthesized from a phosphinine rhodium complex by oxidation of the phosphorus atom, followed by subsequent reduction using metallic potassium. The aromaticity of the newly synthesized irida- and rhoda-benzenes was evaluated both experimentally and theoretically.

Iridium-Catalyzed Asymmetric Allylic Substitution of Methyl Azaarenes

Herein, an Ir-catalyzed asymmetric allylic substitution reaction of methyl azaarenes is described. Azaarenes such as (benzo)thiazole, oxazole, benzoimidazole, pyridine, and (iso)quinoline are all tolerated. The corresponding chiral azaarene derivatives are obtained in good yields with high enantioselectivity (up to 96 % yield and 99 % ee). The utilization of the Knochel reagent TMPZnBr⋅LiBr warrants the in situ formation of benzylic nucleophiles without additional activating reagents. ¹ H NMR studies suggested a two-fold function of the Knochel reagent in this reaction. The synthetic utility of this method has been showcased by a concise enantioselective synthesis of an allosteric protein kinase modulator.

Regio- and Enantioselective γ-Allylic Alkylation of In Situ-Generated Free Dienolates via Scandium/Iridium Dual Catalysis

An unprecedented asymmetric γ-allylic alkylation of free dienolates via Sc/Ir dual catalysis is reported, which affords a range of synthetically versatile γ-allylic crotonaldehydes in high efficiency with excellent chemo-, regio-, and enantioselectivities. The dienolates bearing no essential auxiliary groups were generated in situ by scandium triflate-mediated Meinwald rearrangement of vinyloxiranes atom-economically. With the assistance of computational density functional theory calculations, a Sc/Ir bimetallic catalytic cycle was proposed to illustrate the reaction mechanism.

Iridium-Catalyzed Enantioselective C(sp3 )-H Borylation of Aminocyclopropanes

Transition-metal-catalyzed regio- and stereo-controllable C-H functionalization remains a formidable challenge in asymmetric catalysis. Herein, we disclose the first example of iridium-catalyzed C(sp³ )-H borylation of aminocyclopropanes by using simple imides as weakly coordinating directing groups under mild reaction conditions. The reaction proceeded via a six-membered iridacycle, affording a vast range of chiral aminocyclopropyl boronates. The current method features a broad spectrum of functional groups (36 examples) and high enantioselectivities (up to 99 %). We also demonstrated the synthetic utility by a preparative scale C-H borylation, C-B bond transformations, and conversion of the directing group.

Iridium and IrOx nanoparticles: an overview and review of syntheses and applications

Precious metals are key in various fields of research and precious metal nanomaterials are directly relevant for optics, catalysis, pollution management, sensing, medicine, and many other applications. Iridium based nanomaterials are less studied than metals like gold, silver or platinum. A specific feature of iridium nanomaterials is the relatively small size nanoparticles and clusters easily obtained, e.g. by colloidal syntheses. Progress over the years overcomes the related challenging characterization and it is expected that the knowledge on iridium chemistry and nanomaterials will be growing. Although Ir nanoparticles have been preferred systems for the development of kinetic-based models of nanomaterial formation, there is surprisingly little knowledge on the actual formation mechanism(s) of iridium nanoparticles. Following the impulse from the high expectations on Ir nanoparticles as catalysts for the oxygen evolution reaction in electrolyzers, new areas of applications of iridium materials have been reported while more established applications are being revisited. This review covers different synthetic strategies of iridium nanoparticles and provides an in breadth overview of applications reported. Comprehensive Tables and more detailed topic-oriented overviews are proposed in Supplementary Material, covering synthesis protocols, the historical role or iridium nanoparticles in the development of nanoscience and applications in catalysis.

Phosphorogenic Iridium(III) bis-Tetrazine Complexes for Bioorthogonal Peptide Stapling, Bioimaging, Photocytotoxic Applications, and the Construction of Nanosized Hydrogels

The dual functionality of 1,2,4,5-tetrazine as a bioorthogonal reactive unit and a luminescence quencher has shaped tetrazine-based probes as attractive candidates for luminogenic labeling of biomolecules in living systems. In this work, three cyclometalated iridium(III) complexes featuring two tetrazine units were synthesized and characterized. Upon photoexcitation, the complexes were non-emissive but displayed up to 3900-fold emission enhancement upon the inverse electron-demand Diels-Alder (IEDDA) [4+2] cycloaddition with (1R,8S,9s)-bicyclo[6.1.0]non-4-yne (BCN) substrates. The rapid reaction kinetics (k₂ up to 1.47×10⁴  M^-1  s^-1 ) of the complexes toward BCN substrates allowed effective peptide labeling. The complexes were also applied as live cell bioimaging reagents and photocytotoxic agents. One of the complexes was utilized in the preparation of luminescent nanosized hydrogels that exhibited interesting cargo delivery properties.

MXene-Supported, Atomic-Layered Iridium Catalysts Created by Nanoparticle Re-Dispersion for Efficient Alkaline Hydrogen Evolution

Tailoring the structure of metal components and interaction with their anchored substrates is essential for improving the catalytic performance of supported metal catalysts; the ideal catalytic configuration, especially down to the range of atomic layers, clusters, and even single atoms, remains a subject under intensive study. Here, an Ir-on-MXene (Mo₂ TiC₂ T_x ) catalyst with controlled morphology changing from nanoparticles down to flattened atomic layers, and finally ultrathin layers and single atoms dispersed on MXene nanosheets at elevated temperature, is presented. The intermediate structure, consisting of mostly Ir atomic layers, shows the highest activity toward the hydrogen evolution reaction (HER) under industry-compatible alkaline conditions. In addition, the better HER activity of Ir atomic layers than that of single atoms suggests that the former serves as the main active sites. Detailed mechanism analysis reveals that the nanoparticle re-dispersion process and Ir atomic layers with a moderate interaction to the substrate associate with unconventional electron transfer from MXene to Ir, leading to suitable H* adsorption. The results indicate that the structural design is important for the development of highly efficient catalysts.

Enantioselective Iridium-Catalyzed Reductive Coupling of Dienes with Oxetanones and N-Acyl-Azetidinones Mediated by 2-Propanol

Cyclometallated iridium-PhanePhos complexes generated in situ from [Ir(cod)Cl]₂ and (R)-PhanePhos catalyze 2-propanol-mediated reductive couplings of 2-substituted dienes with oxetanone and N-acyl-azetidinones to form branched homoallylic oxetanols and azetidinols with excellent control of regio- and enantioselectivity without C-C cleavage of the strained ring via enantiotopic π-facial selection of transient allyliridium nucleophiles. This work represents the first systematic study of enantioselective additions to symmetric ketones.

Kinetic, ESI-CID-MS and Computational Studies of π-Allyliridium C,O-Benzoate-Catalyzed Allylic Amination: Understanding the Effect of Cesium Ion

The mechanism of π-allyliridium C,O-benzoate-catalyzed allylic amination was studied by (a) reaction progress kinetic analysis (RPKA), (b) tandem ESI-MS analysis, and (c) computational studies involving density functional theory (DFT) calculations. Reaction progress kinetic analysis (RPKA) reveals a zero-order dependence on allyl acetate, first-order dependence on catalyst and fractional-order dependence on amine. These data corroborate rapid ionization of the allylic acetate followed by turnover limiting C-N bond formation. To illuminate the origins of the 0.4 kinetic order dependence on amine, ESI-MS analyses of quaternary ammonium-labelled piperazine with multistage collision induced dissociation (CID) were conducted that corroborate intervention of cesium-bridged amine dimers that dissociate to form monomeric cesium amide nucleophiles. Computational data align with RPKA and ESI-CID-MS analyses and suggest early transition states mitigate the impact of steric factors, thus enabling formation of highly substituted C-N bonds with complete levels of branched regioselectivity. Specifically, trans-effects of the iridium complex facilitate nucleophilic attack at the more substituted allyl terminus trans to phosphorus with enantioselectivity governed by steric repulsions between the chiral bisphosphine ligand and the π-allyl of a dominant diastereomer of the stereogenic-at-metal complex. Beyond defining aspects of the mechanism of π-allyliridium C,O-benzoate-catalyzed allylic amination, these data reveal that a key feature of cesium carbonate not only lies in its enhanced basicity, but also its capacity for Lewis-acid enhanced Brønsted acidification of amines.

Iridium-Catalyzed Enantioselective and Chemodivergent Allenylic Alkylation of Vinyl Azides for the Synthesis of α-Allenylic Amides and Ketones

The first enantioselective synthesis of α-allenylic amides and ketones through allenylic alkylation of vinyl azides is reported. In these chemodivergent reactions, cooperatively catalyzed by a Ir^I /(phosphoramidite,olefin) complex and Sc(OTf)₃ , vinyl azides act as the surrogate for both amide enolates and ketone enolates. The desiccant (molecular sieves) plays a crucial role in controlling the chemodivergency of this enantioconvergent and regioselective reaction: Under otherwise identical reaction conditions, the presence of the desiccant led to α-allenylic amides, while its absence resulted in α-allenylic ketones. Utilizing racemic allenylic alcohols as the alkylating agent, the overall process represents a dynamic kinetic asymmetric transformation (DyKAT), where both the products are formed with the same absolute configuration. To the best of our knowledge, this is the first example of the use of vinyl azide as the ketone enolate surrogate in an enantioselective transformation.

Ordered PtFeIr Intermetallic Nanowires Prepared through a Silica-Protection Strategy for the Oxygen Reduction Reaction

Developing efficient and stable Pt-based oxygen reduction reaction (ORR) catalysts is a way to promote the large-scale application of fuel cells. Pt-based alloy nanowires are promising ORR catalysts, but their application is hampered by activity loss caused by structural destruction during long-term cycling. Herein, the preparation of ordered PtFeIr intermetallic nanowire catalysts with an average diameter of 2.6 nm and face-centered tetragonal structure (fct-PtFeIr/C) is reported. A silica-protected strategy prevents the deformation of PtFeIr nanowires during the phase transition at high temperature. The as-prepared fct-PtFeIr/C exhibited superior mass activity for ORR (2.03 A mg_Pt ^-1 ) than disordered PtFeIr nanowires with face-centered cubic structure (1.11 A mg_Pt ^-1 ) and commercial Pt/C (0.21 A mg_Pt ^-1 ). Importantly, the structure and electrochemical performance of fct-PtFeIr/C were maintained after stability tests, showing the advantages of the ordered structure.

Rhodium and Iridium Complexes of Anionic Thione and Selone Ligands Derived from Anionic N-Heterocyclic Carbenes

The lithium salts of anionic N‐heterocyclic thiones and selones [{(WCA‐IDipp)E}Li(toluene)] (1: E=S; 2: E=Se; WCA=B(C₆F₅)₃, IDipp=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene), which contain a weakly coordinating anionic (WCA) borate moiety in the imidazole backbone were reacted with Me₃SiCl, to furnish the silylated adducts (WCA‐IDipp)ESiMe₃ (3: E=S; 4: E=Se). The reaction of the latter with [(η⁵‐C₅Me₅)MCl₂]₂ (M=Rh, Ir) afforded the rhodium(III) and iridium(III) half‐sandwich complexes [{(WCA‐IDipp)E}MCl(η⁵‐C₅Me₅)] (5–8). The direct reaction of the lithium salts 1 and 2 with a half or a full equivalent of [M(COD)Cl]₂ (M=Rh, Ir) afforded the monometallic complexes [{(WCA‐IDipp)E}M(COD)] (9–12) or the bimetallic complexes [μ₂‐{(WCA‐IDipp)E}M₂(COD)₂(μ₂‐Cl)] (13–16), respectively. The bonding situation in these complexes has been investigated by means of density functional theory (DFT) calculations, revealing thiolate or selenolate ligand character with negligible metal‐chalcogen π‐interaction.

On the Energy Performance of Iridium Satellite IoT Technology

Most Internet of Things (IoT) communication technologies rely on terrestrial network infrastructure. When such infrastructure is not available or does not provide sufficient coverage, satellite communication offers an alternative IoT connectivity solution. Satellite-enabled IoT devices are typically powered by a limited energy source. However, as of this writing, and to our best knowledge, the energy performance of satellite IoT technology has not been investigated. In this paper, we model and evaluate the energy performance of Iridium satellite technology for IoT devices. Our work is based on real hardware measurements. We provide average current consumption, device lifetime, and energy cost of data delivery results as a function of different parameters. Results show, among others, that an Iridium-enabled IoT device, running on a 2400 mAh battery and sending a 100-byte message every 100 min, may achieve a lifetime of 0.95 years. However, Iridium device energy performance decreases significantly with message rate.

Theoretical insight on electronic structure and photophysical properties of a series of cyclometalated iridium(III) complexes bearing the substituted phenylpyrazole with different electron-donating or electron-accepting groups

By using the density functional theory (DFT) and time-dependent density functional theory (TDDFT), the electronic structure and photophysical properties of a series of cyclometalated iridium(III) complexes bearing the substituted phenylpyrazole have been theoretically investigated. All studied iridium(III) complexes have the distorted octahedral geometry with cis-C,C, cis-O,O, and trans-N,N chelate disposition. The lowest lying singlet → singlet absorptions of all studied iridium(III) complexes are respectively located at 405 nm, 387 nm, 382 nm, 370 nm, and 387 nm. The calculated emission wavelengths for all studied iridium(III) complexes are 654 nm, 513 nm, 506 nm, 505 nm and 499 nm, respectively. The calculated emission wavelength for complex 4 at the CAM-B3LYP level is in good agreement with the experimental value. From the theoretical results, it can be seen that the electron-donating substituent groups have the important effect on the electronic structure and photophysical properties of all studied iridium(III) complexes. We hope that this study can provide valuable guidance for the design of new phosphorescent organic light-emitting diodes (OLEDs) materials.

Molecular Alignment of Homoleptic Iridium Phosphors in Organic Light-Emitting Diodes

The orientation of facial (fac) tris-cyclometalated iridium complexes in doped films prepared by vacuum deposition is investigated by altering the physical shape and electronic asymmetry in the molecular structure. Angle-dependent photoluminescence spectroscopy and Fourier-plane imaging microscopy show that the orientation of roughly spherical fac-tris(2-phenylpyridyl)iridium (Ir(ppy)₃ ) is isotropic, whereas complexes that are oblate spheroids, fac-tris(mesityl-2-phenyl-1H-imidazole)iridium (Ir(mi)₃ ) and fac-tris((3,5-dimethyl-[1,1'-biphenyl]-4-yl)-2-phenyl-1H-imidazole)iridium (Ir(mip)₃ ), have a net horizontal alignment of their transition dipole moments. Optical anisotropy factors of 0.26 and 0.15, respectively, are obtained from the latter complexes when doped into tris(4-(9H-carbazol-9-yl)phenyl)amine host thin films. The horizontal alignment is attributed to the favorable van der Waals interaction between the oblate Ir complexes and host material. Trifluoromethyl groups substituted on one polar face of the Ir(ppy)₃ and Ir(mi)₃ complexes introduce chemical asymmetries in the molecules at the expense of their oblate shapes. The anisotropy factors of films doped with these substituted derivatives are lower relative to the parent complexes, indicating that the fluorinated patches reinforce horizontal alignment during deposition. High efficiencies obtained from organic light emitting diodes prepared using the Ir dopants is attributed, in part, to improved outcoupling of electroluminescence brought about by molecular alignment.

Iridium-Catalyzed Hydroarylation via C-H Bond Activation

Hydroarylation reactions via C-H activation, which compensate for shortcomings of classical methods based on the Friedel-Crafts reaction, is one of the most attractive methods to synthesize substituted arenes. This Personal Account reviews our recent studies on iridium-catalyzed intermolecular hydroarylation of vinyl ethers, alkynes, bicycloalkenes, and 1,3-dienes, and intramolecular hydroarylation of m-allyloxyphenyl ketones, where asymmetric addition reactions are included. A cationic iridium catalyst, which is generated from chloroiridium [IrCl] and NaBAr^F ₄ [Ar^F =3,5-(CF₃ )₂ C₆ H₃ ], or a hydroxoiridium [Ir(OH)] complex is effective in catalyzing the hydroarylation depending on the substrates. 1,5-Cyclooctadiene (cod), chiral dienes, and conventional bisphosphines function as ligands controlling the high reactivity and selectivity of the catalysts in the hydroarylation. H/D exchange reaction of alkenes by use of a key intermediate of the hydroarylation reaction is also described.

From Hydrogenation to Transfer Hydrogenation to Hydrogen Auto-Transfer in Enantioselective Metal-Catalyzed Carbonyl Reductive Coupling: Past, Present, and Future

Atom-efficient processes that occur via addition, redistribution or removal of hydrogen underlie many large volume industrial processes and pervade all segments of chemical industry. Although carbonyl addition is one of the oldest and most broadly utilized methods for C-C bond formation, the delivery of non-stabilized carbanions to carbonyl compounds has relied on premetalated reagents or metallic/organometallic reductants, which pose issues of safety and challenges vis-à-vis large volume implementation. Catalytic carbonyl reductive couplings promoted via hydrogenation, transfer hydrogenation and hydrogen auto-transfer allow abundant unsaturated hydrocarbons to serve as substitutes to organometallic reagents, enabling C-C bond formation in the absence of stoichiometric metals. This perspective (a) highlights past milestones in catalytic hydrogenation, hydrogen transfer and hydrogen auto-transfer, (b) summarizes current methods for catalytic enantioselective carbonyl reductive couplings, and (c) describes future opportunities based on the patterns of reactivity that animate transformations of this type.

Bioactive half-sandwich Rh and Ir bipyridyl complexes containing artemisinin

Reaction of dihydroartemisinin (DHA) with 4-methyl-4'-carboxy-2,2'-bipyridine yielded the new ester derivative L1. Six novel organometallic half-sandwich chlorido Rh(III) and Ir(III) complexes (1-6) containing pentamethylcyclopentadienyl, (Cp*), tetramethylphenylcyclopentadienyl (Cp^xph), or tetramethylbiphenylcyclopentadienyl (Cp^xbiph), and N,N-chelated bipyridyl group of L1, have been synthesized and characterized. The complexes were screened for inhibitory activity against the Plasmodium falciparum 3D7 (sensitive), Dd2 (multi-drug resistant) and NF54 late stage gametocytes (LSGNF54), the parasite strain Trichomonas vaginalis G3, as well as A2780 (human ovarian carcinoma), A549 (human alveolar adenocarcinoma), HCT116 (human colorectal carcinoma), MCF7 (human breast cancer) and PC3 (human prostate cancer) cancer cell lines. They show nanomolar antiplasmodial activity, outperforming chloroquine and artemisinin. Their activities were also comparable to dihydroartemisinin. As anticancer agents, several of the complexes showed high inhibitory effects, with Ir(III) complex 3, containing the tetramethylbiphenylcyclopentadienyl ligand, having similar IC₅₀ values (concentration for 50% of maximum inhibition of cell growth) as the clinical drug cisplatin (1.06-9.23 μM versus 0.24-7.2 μM, respectively). Overall, the iridium complexes (1-3) are more potent compared to the rhodium derivatives (4-6), and complex 3 emerges as the most promising candidate for future studies.

Skin and respiratory exposure to platinum group metals at two South African precious metals refineries

OBJECTIVE

Platinum Group Metals (PGMs) are mined and refined together and have the potential to elicit adverse respiratory and skin health effects. The aim of this study was to investigate the simultaneous skin and respiratory exposure of precious metals refinery workers to all six soluble PGMs.

METHODS

The simultaneous skin and respiratory exposure to soluble PGMs of forty workers at two precious metals refineries were measured over two consecutive work shifts using Ghostwipes™ and Methods for the Determination of Hazardous Substances method 46/2. Skin exposure was measured on the palm, wrist, neck, and forehead of workers.

RESULTS

The highest geometric mean (GM) skin exposure (average of palm, wrist, neck and forehead) was found for soluble Pt (0.008 µg/cm²) [95% confidence interval (CI) 0.005-0.013], followed, in order, by Rh, Ir, Pd, Ru, and Os. Significantly higher concentrations of soluble PGMs were found on the palm and wrist compared to the neck and forehead (p < 0.0001). The highest GM respiratory exposure was found for soluble Pd (0.342 µg/m³ [95% CI 0.163-0.718]) followed, in order, by Pt, Rh, Ru, Ir, and Os. Skin exposure to all soluble PGMs was positively correlated with respiratory exposure (r = 0.466-0.702).

CONCLUSION

This is the first study to report skin exposure to all six soluble PGMs. Precious metals refinery workers were exposed to quantifiable concentrations of soluble PGMs via both the skin and inhalation. Exposure via both routes occurred together and control measures should be aimed at reducing both skin and respiratory exposure.