Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Ion incorporation into cobalt(II)-organic framework for green and efficient synthesis of oxazolidinones via carbon dioxide fixation

Developing a green and efficient method for CO2 transformation is crucial for advancing carbon neutrality and effective resource utilization. Among the transformations, carboxylative cyclization of CO2 to produce oxazolidinones is an atom-economical reaction with valuable pharmaceutical applications. However, most catalytic systems often require high temperatures, organic solvents or show low efficiency. Herein, we report a novel anionic framework, {[NH2(CH3)2]2[Co3(L)3(µ3-O)]·0.37DMA }n (1), which can be synthesized on a gram scale and displays excellent stability. As a catalyst, compound 1 enables the carboxylative cyclization of propargylic amines with CO2 at 70 °C for 12 h under ambient pressure, and can be reused up to 10 times while maintaining structural stability. Given the relatively high temperature and extended reaction time required in the 1-catalytic system, Ag+ and Cu2+ ions are incorporated into the framework of compound 1 through cation exchange. The Ag+-incorporated composite 1-Ag(0.05) exhibits high catalytic efficiency under ambient temperature and CO2 pressure within 6 h without using solvent, and can be reused for at least five successive cycles. Control experiments and DFT calculations reveal that the synergistic interaction between Ag+, Co-framework and DBU is the key factor promoting the reaction. To our knowledge, this study provides the first comprehensive investigation into the impact of ion incorporation on the catalytic performance of a Co-based framework in the carboxylative cyclization of propargylic amines with CO2.

Multifunctional Cd(II) Metal-Organic Framework with Abundant Lewis Acidic and Basic Sites: Selective Gas Adsorption and Separation, CO2 Catalytic Fixation, and Fluorescence Recognition of Uric Acid

The development of new porous materials for the selective adsorption and fixation of CO2, as well as the selective capture of C2H2, is essential for environmental protection and energy security. Herein, a versatile coordination polymer, {[Cd(btbpa)(H2O)]·3H2O·4NMP·DMA}n (Cd-btbpa, H2btbpa = 4,4'-bis(1H-1,2,4-triazole-1-yl)-[1,1'-biphenyl]-3,3'-dicarboxylic acid), has been prepared, which not only exhibits good chemical and thermal stability but also possesses adaptive nanochannels. Gas uptake studies disclosed the selective adsorption properties of MOF Cd-btbpa for CO2 and C2H2 over other gases (N2, CH4, C2H4, and C2H6), contributing to a record-high IAST selectivity of ca. 3905 (50/50 of CO2/CH4, v/v). The adsorption selectivity values for C2H2/C2H4 and CO2/N2 at 298 K are 2.14 and 41.79, respectively. Breakthrough experiments were carried out to confirm its practical application value for CO2/CH4, CO2/N2, and C2H2/C2H4 separation. In addition, it can drive heterogeneous cycloaddition of CO2 with various epoxides under mild conditions (75 °C, 1 atm) and boost the yield of produced cyclic carbonates almost to 100% for the epoxides such as 1,2-epoxybutane and epichlorohydrin. Besides, Cd-btbpa shows excellent recognition ability for uric acid (UA) with high KSV (3.9378 × 104 M-1) and sensitivity (LOD: 0.14 μM).

Doping and defect engineering in carbon-based electrocatalysts for enhanced electrochemical CO2 reduction: From 0D to 3D materials

The increasing atmospheric CO2 levels and the urgent need for sustainable energy solutions have driven research into electrochemical CO2 reduction. Carbon-based materials have received significant attention for their potential as electrocatalysts, yet their inert nature often limits their performance. Defect engineering and heteroatom doping have emerged as transformative approaches to overcome these limitations, enhancing both catalytic activity and Faradaic efficiency. This review systematically examines the role of these strategies across diverse carbon materials, including graphene, carbon nanotubes, carbon dots, and boron-doped diamond. Special attention is given to the incorporation of heteroatoms, such as nitrogen and boron, and the modulation of defect structures to optimize CO2 reduction pathways. By exploring the interplay between dopant type, defect density, and material dimensionality, we provide a comprehensive understanding of how tailored carbon-based electrocatalysts can drive advancements in sustainable electrochemical CO2 conversion. This work underscores the potential of defect-engineered and doped carbon materials to revolutionize the field of electrocatalysis, paving the way for innovative solutions to environmental and energy challenges.

Integrating Multifunctionalities into a 3D Covalent Organic Framework for Efficient CO2 Photoreduction

Fabrication of highly efficient photocatalysts for CO2 conversion is still challenging. Herein, integrating nitrogen-rich organic cages and the photoactive porphyrin moieties together, a 3D covalent organic framework (COF), Cage-PorCOF, is successfully synthesized. After incorporating metal ions (Co2+ and Ni2+) into the cage-based COF, Cage-PorCOF(Co) and Cage-PorCOF(Ni) are subsequently constructed for the CO2 photoreduction. Catalytic experiments show impressive performance in CO2 photoreduction with CO generation rates of up to 48 748 and 28 446 µmol g-1 h-1 in the first initiating hour for Cage-PorCOF(Co) and Cage-PorCOF(Ni), respectively, which is attributed to the synergistic effects from CO2-affinity of the porous frameworks and incorporated metal atoms, the light-absorption and charge separation ability of metalloporphyrin groups as well as the fully exposed single-atomic catalytic sites confirmed by both experimental and theoretical analyses. This study demonstrates that by the integration of multiple functionalities into 3D porous solids, highly effective photocatalysts for CO2 conversion can be achieved.

Polyoxometalate-Based AgI-MOF for Promoting Catalytic Conversion of CO2 and Propargylic Alcohols under Mild Conditions

The conversion of carbon dioxide to high-value chemicals is greatly significant to green chemistry. The cyclization reaction of CO2 with propargyl alcohol to form α-alkylidene cyclic carbonates has attracted attention due to atomic economy. Silver (AgI) has emerged as one of the most effective activators for alkynes, attributed to its distinctive electronic configuration affording a specific affinity with alkynes. Herein, two novel AgI-based metal-organic frameworks containing Keggin PMo12O403- (abbreviated as {PMo12}), namely, {Ag3(btap)3[PMo12O40]}·H2O (Ag-1) and {Ag(Hbtap)2[PMo12O40]} (Ag-2, btap is 3,5-bis(1',2',4'-triazol-1'-yl)pyridine), were successfully synthesized. Ag-1 exhibits both exceptional thermal and solvent stability, along with high catalytic activity in CO2 cyclization with various substituted propargylic alcohols into α-alkyl cyclic carbonates at room temperature and atmospheric pressure. The highly dispersed AgI and {PMo12} sites are beneficial for the superior performance of Ag-1, by activating the C≡C bond and adsorbing carbon dioxide, respectively. Based on the catalytic results, structural analysis, and classical chemical bond theory, it is speculated that the three-coordinated silver in Ag-1 has higher Lewis acidity compared with Ag-2, making it easier to activate the substrate. Notably, the Ag-1 catalyst exhibits outstanding stability with negligible activity loss over at least five successive cycles.

Tuning the Pore Microenvironment of Metal-Organic Frameworks for Boosting CO2 Fixation

The pore microenvironment plays an important role in catalytic systems, as it can regulate substrate transport, reactant molecule enrichment, and the strength of active centers, thereby affecting catalytic performance. However, the effect of pore sizes/functionality/Lewis acid strength on catalytic performance has still not been adequately and systematically investigated and summarized. Herein, a series of isostructural fcu-type metal-organic frameworks (MOFs) are used through a novel strategy to study the effect of subtle changes in pore microenvironment on the catalysis of carbon dioxide (CO2) cycloaddition at ambient temperature and pressure. The results of systematic experiments indicate that the enlargement of the pore size of MOFs, the access of pore wall functional groups, and the increase of Lewis acid strength of metal nodes can significantly improve the performance of the CO2 cycloaddition reaction. The reaction mechanism catalyzed by fcu-type MOFs is investigated in detail, based on the experimental inferences and periodic calculations of density functional theory. This study provides a reference for designing of high-performance catalysts for CO2 fixation.

Direct Electroreduction of Low-Concentration CO2: Progress and Perspective

The conversion of CO2 into carbon-based fuels and chemicals via the electrocatalytic CO2 reduction reaction (CO2RR) offers an attractive route to reducing the CO2 emission for carbon neutrality. Currently, high-purity CO2 gas has been widely used as the feedstock for most of the CO2RR studies, while CO2 sources with a typically low concentration impose the extra cost for CO2 capture and purification steps. The direct utilization of low-concentration CO2 for the CO2RR is a promising approach to substantially address this problem. In this Perspective, we first highlight the prominent advantages of direct electroreduction of low-concentration CO2. Then we focus on the summary of several important design strategies for CO2RR in diluted CO2 and gas impurities-containing CO2 atmosphere. Finally, we propose personal outlooks on future challenges and some opportunities for this fascinating research field.

Tailoring Catalysts for CO2 Hydrogenation: Synthesis and Characterization of NH2-MIL-125 Frameworks

Copper nanoparticles have been integrated onto the framework of modified NH2-MIL-125(Ti), a metal-organic framework (MOF), and evaluated as catalysts for converting CO2 into valuable products. The modified MOF was achieved through a post-synthetic modification process involving the partial replacement of titanium with zirconium or cerium within the MOF's structure. The objective behind this alteration is to create a synergistic effect between the MOF, serving as a support matrix, and the embedded copper nanoparticles, thereby enhancing the performance of the catalyst. The obtained catalysts were characterized and evaluated in the hydrogenation of CO2 to methanol under different experimental conditions, reaching CO2 conversions of up to 5%, with a selectivity towards methanol that reached values of up to 60%. According to the obtained results, the catalyst composed of Ti, Zr and Cu stood out for having the highest CO2 conversion and selectivity towards methanol, in addition to practically inhibiting the production of methane. These results demonstrate that the interaction of the framework with the Cu nanoparticles, and thus its catalytic properties, can be changed by modifying the properties of the MOF.

Enhancement of Two Types of CO2 Conversion by Regulating Functional Thiophene Groups within Zn-MOF

Sustainable conversion of epoxides and propargylic amines using CO2 could produce valuable chemical products. Efficient conversion generally requires harsh conditions such as noble-metal catalysts, cocatalysts, and toxic solvents, thereby underscoring the crucial need for environmentally friendly non-noble-metal metal-organic framework (MOF) catalysts. In this study, we designed a novel zinc-based metal-organic framework (MOF) with a 5-fold interpenetrating diamond framework, specifically {[Zn(DMTDC)(bpy)]·H2O}n (Zn-MOF-2), where H2DMTDC represents 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid and bpy denotes 4,4'-bipyridine. Zn-MOF-2 serves as a bifunctional heterogeneous catalyst to promote the cyclization reaction of epoxides and propargylamine with CO2 under mild conditions. The isolated yields of the resulting cyclic carbonates and oxazolidinones were 92% and 93%, respectively. Notably, the catalyst maintained good catalytic activity after five catalytic cycles in both types of CO2 conversion. Control experiments confirmed the effective catalytic activity of the Zn2+ Lewis acid sites in Zn-MOF-2. The isostructural CPO-5 assembled from 4,4'-biphenyldicarboxylic acid has also been demonstrated to catalyze the cycloaddition of epoxides and CO2 but with an inferior performance in catalyzing the carboxyl cyclization of propargylic amines. This result shows that the thiophene ring in the ligand plays a pronounced role in the catalytic performance. The research will enhance the development of effective MOF catalysts for the conversion of CO2.

Modulated Multicomponent Reaction Pathway by Pore-Confinement Effect in MOFs for Highly Efficient Catalysis of Low-Concentration CO2

The conversion of flue gas CO2 into high-value chemicals via multicomponent reactions (MCRs) offers the advantages of atom economy, bond-formation efficiency and product complexity. However, because of the competition between reaction sequences and pathways among substrates, the efficient synthesize the desired product is a great challenge. Herein, a porous noble-metal-free framework (Cu-TCA) was synthesized, which can highly effectively catalyze the multicomponent conversion of CO2 by modulating reaction pathways. The pores with the size of 6.5 Å×6.5 Å in Cu-TCA selectively permit the entry of propargylamine and CO2 at simulated flue gas concentrations, At the same time, the larger-sized phosphine oxide is hindered outside the pores. Control experiments and NMR spectroscopy revealed that CO2 and propargylamine in the pores preferentially reacted to form oxazolidinones, which further reacted with phosphine oxide outside the pores to produce phosphorylated 2-oxazolidinones. Therefore, the reaction pathways and sequence of the substrates were controlled by the confinement effect of the pores in Cu-TCA. Density functional theory (DFT) calculations supported the coordination of Cu-TCA with the alkyne, significantly reducing the reaction barrier and promoting catalytic reaction. This study developed a new strategy for regulating the reaction pathways to promote MCRs via the confinement effect of MOF.

Cobalt-Cluster-Based Metal-Organic-Framework-Catalyzed Carboxylative Cyclization of Propargylic Amines with CO2 from Flue Gas

The fixation of carbon dioxide (CO2) directly from flue gas into valuable chemicals like 2-oxazolidinones is of great significance for economic and environmental benefits, which is typically catalyzed by noble-metal catalysts and under harsh conditions. Herein, a novel 2-fold interpenetrated framework {[Co3(μ2-O)(TCA)2(HDPTA)2]·2H2O·2DMF}n [Co(II)-based metal-organic framework (Co-MOF)] containing [Co3] clusters and highly dense amino groups (-NH2) dispersed in the channel was prepared, exhibiting high solvent/pH stability and CO2 adsorption capacity (24.9 cm3·g-1). Catalytic experiments demonstrated that Co-MOF could catalyze the carboxylative cyclization of propargylic amines to generate 2-oxazolidinones with yields of up to 98% under mild conditions with CO2 directly from flue gas. In addition, Co-MOF retained its structure and catalytic activity after five-cycle catalytic experiments, showing the promising practical application. Density functional theory (DFT) calculation suggested that the [Co3] centers in the MOF activated the C≡C of propargylic amines with much more binding energy than Co(NO3)2, partly accounting for the high catalytic activity of Co-MOF. This work demonstrates the first Co-based MOF material that is highly efficient for carboxylative cyclization of propargylic amines with flue gas as the CO2 source, inspiring further rational design of porous catalysts for efficient CO2 utilization.

Scale-up of Microdroplet Reactors for Efficient CO2 Resource Utilization

Two-phase reactions involving microdroplets have gained significant attention in recent years due to their unique ability to catalyze and accelerate reactions that typically do not occur under standard conditions by leveraging chemical and physical effects at the micrometer-scale interface. In this work we have innovatively developed a scaled-up microdroplet reactor for the efficient resource utilization of CO2. The reaction liquid is sprayed in the form of mist (d32 < 20 μm), facilitating complete contact and reaction with gaseous CO2. We explored the effects of spray properties and reactor parameters on the continuous production of organic carbonates from CO2. Remarkably, the microdroplet reactor enhanced the reaction efficiency by at least 10-fold compared to conventional high-pressure reactor setups. Additionally, we used computational fluid dynamics (CFD) simulations to optimize the process conditions and continuous production parameters, systematically studying the effects of scaling up the device. Here, we present insights into the utilization of microdroplet reactors for CO2 conversion in scaled-up applications, supported by robust data.

A Multifunctional Tb(III)-Based Metal-Organic Framework for Chemical Conversion of CO2, Fluorescence Sensing of Trace Water and Metamitron

The utilization of metal-organic frameworks (MOFs) as fluorescent sensors for the detection of environmental and chemical reagent pollutants as well as heterogeneous catalysis for CO2 conversion represents a crucial avenue of research with significant implications for the protection of human health. In this work, a Tb(III)-based three-dimensional metal-organic framework, [Tb(L)·4DMF]n (Tb-MOF) (H3L = 5'-(4-carboxy-3-hydroxyphenyl)-3,3″-dihydroxy-[1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid), has been structurally conformed by single-crystal X-ray crystallography. It possesses a 1D rhombus channel along the [010] direction, featuring a pore size of 6.02 × 9.13 Å. Tb-MOF was proved to be a multifunctional material for a fluorescent sensor and CO2 cycloaddition heterogeneous catalyst material. Fluorescence sensing studies revealed that Tb-MOF demonstrates high sensitivity, selectivity, and favorable regeneration properties, making it an effective chemosensor for detecting the metamitron (MMT) pesticide and trace water in organic solvents. The mechanism of fluorescence quenching by MMT and water was elucidated by a combination of XRD, UV-vis absorption spectra, IR spectra, theoretical calculations, and fluorescence lifetimes. The material was also utilized for the sensing of MMT and water in paper strips. Additionally, the open Tb3+ site as Lewis acidic centers makes Tb-MOF achieve efficiently catalytic conversion for CO2 and epoxides to cyclic carbonates. Moreover, a possible catalytic mechanism for the conversion of carbon dioxide to cyclic carbonates was proposed by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments. It also exhibited recyclability for up to five cycles without noticing an appreciable loss in sensing or catalytic efficiency.

CO-Free Aminocarbonylation of Terminal Alkynes Catalyzed by Synergistic Effect From Metal-Organic Frameworks

Incorporation of CO into substrates to construct high-value carbonyl compounds is an intensive industrial carbonylation procedure, however, high toxicity and wide explosion limits (12.5-74.0 vol% in air) of CO limit its application in industrial production. The development of a CO-free catalytic system for carbonylation is one of ideal methods, but full of challenge. Herein, this study reports the CO-free aminocarbonylation conversion of terminal alkynes synergistically catalyzed by a unique Co(ІІ)/Ag(І) metal-organic framework (MOF), in which the combination of isocyanides and O2 is employed as safe and green source of aminocarbonyl. This reaction has broad substrate applicability in terminal alkyne and isocyanides components with 100% atom economy. The bimetal MOF catalyst can be recycled at least five times without substantial loss of catalytic activities. Mechanistic investigations demonstrate that the synergistic effect between Ag(I) and Co(II) sites can efficiently activate terminal alkyne and isocyanides, respectively. Free radical capture experiments, FT-IR analysis and theoretical explorations further reveal that terminal alkynes and isocyanides can be catalytically transformed into an anionic intermediate through heterolysis pathways. This work provides secure and practical access to carbonylation as well as a new approach to aminocarbonylation of terminal alkynes.

Design Principles of Catalytic Materials for CO2 Hydrogenation to Methanol

Heterogeneous catalysts are essential for thermocatalytic CO2 hydrogenation to methanol, a key route for sustainable production of this vital platform chemical and energy carrier. The primary catalyst families studied include copper-based, indium oxide-based, and mixed zinc-zirconium oxides-based materials. Despite significant progress in their design, research is often compartmentalized, lacking a holistic overview needed to surpass current performance limits. This perspective introduces generalized design principles for catalytic materials in CO2-to-methanol conversion, illustrating how complex architectures with improved functionality can be assembled from simple components (e.g., active phases, supports, and promoters). After reviewing basic concepts in CO2-based methanol synthesis, engineering principles are explored, building in complexity from single to binary and ternary systems. As active nanostructures are complex and strongly depend on their reaction environment, recent progress in operando characterization techniques and machine learning approaches is examined. Finally, common design rules centered around symbiotic interfaces integrating acid-base and redox functions and their role in performance optimization are identified, pinpointing important future directions in catalyst design for CO2 hydrogenation to methanol.

Phosphoester bond hydrolysis by a discrete zirconium-oxo cluster: mechanistic insights into the central role of the binuclear ZrIV-ZrIV active site

Effective degradation of non-natural phosphate triesters (PTs) widely used in pesticides and warfare agents is of paramount relevance for human and environmental safety, particularly under acidic conditions where they are highly stable. Here, we present a detailed reactivity and mechanistic study pioneering discrete {Zr6O8} clusters, which are commonly employed as building blocks for Zr-MOFs and as non-classical soluble coordination compounds for the degradation of PTs using the pesticide ethyl paraoxon as a model. Combined computational studies, mechanistic experiments, and EXAFS analysis show that the reactivity of these clusters arises from their ZrIV-ZrIV bimetallic sites, which hydrolyze ethyl paraoxon under acidic conditions through an intramolecular pathway. Remarkably, the energetics of the reaction is dependent on the protonation state of the active sites, and a weakly acidic medium favors the reaction. Moreover, catalyst stability allowed for its recovery and reuse. Such a mechanism is in close analogy to enzymatic reactions and different from that previously reported for Zr-MOFs. These findings outline the potential of MIV-MIV active sites for PT degradation under challenging aqueous acidic conditions and contribute to the development of bioinspired catalysts and materials.

Bimetallic MnZn-MOF-74 with enhanced percentage of MnIII: Efficiently catalytic activity for direct oxidative carboxylation of olefins to cyclic carbonates under mild and solvent-free condition

Multi-functional MOF catalyst with oxidative- and acid- centers showed potential in olefins oxidative carboxylation to cyclic carbonates directly. In this work, a series of bimetallic MnZn-MOF-74 with different molar ratios of Mn and Zn were synthesized successfully through a one-pot facile method. Thoroughly characterization indicated that the existence of Zn regulated the valance state distribution of Mn in the obtained MnZn-MOF-74. Mn99.3Zn0.7-MOF-74 with the highest ratio of MnIII (61.3 %) performed the most efficient activity for olefin direct tandem oxidative carboxylation reaction using aqueous tert-butyl hydroperoxide oxidant under solvent-free condition of 90 °C, 1.0 MPa CO2 and 4 h. Mn99.3Zn0.7-MOF-74 also showed satisfactory versatility and recyclability. Based on the experiments, a feasible mechanism was presented. Thanks to the high ratio of active MnIII as main oxidative center, the coordination unsaturated bimetal Mn and Zn as Lewis-acid sites, O2- of metal - O as Lewis-base sites and combined effect with Bu4NBr cocatalyst, Mn99.3Zn0.7-MOF-74 presented efficient performance for the direct synthesis of cyclic carbonates from olefins. The metal Zn in MOF can regulate the valance state distribution of Mn and result in efficient catalytic property, presenting a potential avenue for direct oxidative carboxylation reaction of olefins to cyclic carbonates synthesis.

Cu(II)-Organic Framework for Carboxylative Cyclization of Propargylic Amines with CO2

Effective CO2 transformations hold essential significance for carbon neutrality and sustainable energy development. Carboxylative cyclization of propargylic amines with CO2 serves as an atom-economic reaction to afford oxazolidinones, showing broad applications in organic synthesis and pharmaceutical fields. However, most catalysts involved noble metals, exhibited low efficiency, or required large amounts of base. Hence, it is imperative to explore alternative noble-metal-free catalysts in order to achieve efficient conversion while minimizing the use of additives. Herein, a novel nanopore-based Cu(II)-organic framework (1) based on a new imidazole carboxylic ligand was successfully constructed and exhibited excellent stability. Catalytic investigations revealed that the combination of 1 with 1,4-diaza[2.2.2]bicyclooctane (DABCO) efficiently catalyzed the carboxylative cyclization of propargylic amines with CO2, achieving turnover numbers of 142 based on the catalyst and 7.1 based on DABCO. 1 as a heterogeneous catalyst maintained high catalytic performance even after being reused at least 5 cycles, with its structure remaining stable. The strong activation of Cu(II) cluster nodes of catalyst 1 toward -NH- groups within organic substrates, as demonstrated by mechanism experiments, along with excellent CO2 adsorption performance and the presence of regular 1D channels, synergistically facilitates the reaction rate. This research presents the first instance of a Cu(II)-organic framework achieving this cyclization reaction, offering wide prospects for novel catalyst design and CO2 utilization.

Integrated "all-in-one" strategy to construct highly efficient Pd catalyst for CO2 transformation

The synthesis of high-value chemicals featuring C-C and/or C-heteroatom bonds via CO2 is critically important, yet efficiently converting thermodynamically stable and kinetically inert linear CO2 and propargylic amine to the heterocyclic compound 2-oxazolidinone with an integrated catalytic system continues to pose a considerable challenge. Herein, we have designed an "all-in-one" (AIO) palladium (Pd) catalyst (Cat1), distinguished by its co-coordination with acetylglucose (AcGlu) and bis(benzimidazolium) units at the Pd center, which promotes the cyclization of CO2 and propargylic amine achieving a highest turnover frequency (TOF) of up to 3456 h-1. Moreover, Cat1 demonstrates excellent stability across various temperatures, with its catalytic activity remaining unchanged even after 10 cycles. The catalyst Cat1 simultaneously activates propargylic amine and CO2, facilitating the formation of N-heterocyclic carbene (NHC)-CO2 adducts and AcGlu-CO2 philes from CO2 in simulated flue gas, a key factor in reaching unprecedented TOF values. The catalytic mechanism was elucidated through quasi-in-situ NMR and 13C-isotope labeling experiments. Notably, this is the first instance of an AIO Pd catalyst that enables the simultaneous capture, activation, and catalytic conversion of in-situ activated CO2 along with propargylic amine. The design strategy of this AIO catalyst introduces a novel approach to overcoming the challenges in the efficient conversion of inert CO2.

Metal Variance in Multivariate Metal-Organic Frameworks for Boosting Catalytic Conversion of CO2

Developing efficient, low-cost, MOF catalysts for CO2 conversion at low CO2 concentrations under mild conditions is particularly interesting but remains highly challenging. Herein, we prepared an isostructural series of two-dimensional (2D) multivariate metal-organic frameworks (MTV-MOFs) containing copper- and/or silver-based cyclic trinuclear complexes (Cu-CTC and Ag-CTC). These MTV-MOFs can be used as efficient and reusable heterogeneous catalysts for the cyclization of propargylamine with CO2. The catalytic performance of these MTV-MOFs can be engineered by fine-tuning the Ag/Cu ratio in the framework. Interestingly, the induction of 10% Ag remarkably improved the catalytic efficiency with a turnover frequency (TOF) of 243 h-1, which is 20-fold higher than that of 100% Cu-based MOF (i.e., TOF = 10.8 h-1). More impressively, such a bimetallic MOF still exhibited high catalytic activity even for simulated flue gas with 10% CO2 concentration. Furthermore, the reaction mechanism has been examined through the employment of NMR monitoring experiments and DFT calculations.

Metal Hydrogen-Bonded Organic Frameworks as Open Lewis Acid Catalysts for Two Types of CO2 Transformations

Efficient and multiple CO2 utilization into high-value-added chemicals holds significant importance in carbon neutrality and industry production. However, most catalysis systems generally exhibit only one type of CO2 transformation with the efficiency to be improved. The restricted abundance of active catalytic sites or an inefficient utilization rate of these sites results in the constraint. Consequently, we designed and constructed two metal hydrogen-bonded organic frameworks (M-HOFs) {[M3(L3-)2(H2O)10]·2H2O}n (M = Co (1), Ni (2); L = 1-(4-carboxyphenyl)-1H-pyrazole-3,5-dicarboxylic acid) in this research. 1 and 2 are well-characterized, and both show excellent stability. The networks connected by multiple hydrogen bonds enhance the structural flexibility and create accessible Lewis acidic sites, promoting interactions between the substrates and catalytic centers. This enhancement facilitates efficient catalysis for two types of CO2 transformations, encompassing both cycloaddition reactions with epoxides and aziridines to afford cyclic carbonates and oxazolidinones. The catalytic activities (TON/TOF) are superior compared with those of most other catalysts. These heterogeneous catalysts still exhibited high performance after being reused several times. Mechanistic studies indicated intense interactions between the metal sites and substrates, demonstrating the reason for efficient catalysis. This marks the first instance on M-HOFs efficiently catalyzing two types of CO2 conversions, finding important significance for catalyst design and CO2 utilization.

Two-Dimensional Cu(II)-MOF with Lewis Acid-Base Bifunctional Sites for Chemical Fixation of CO2 and Bioactive 1,4-DHP Synthesis via Hantzsch Condensation

Five- and six-membered heterocycles containing nitrogen or oxygen have been considered as privileged scaffolds in organic chemistry and the chemical industry because of their usage in high-value commodities. Herein, we report a two-dimensional (2D) Cu(II)-based MOF catalyst, IITKGP-40, via the strategic employment of ample Lewis acid-base bifunctional sites (open metal nodes and free pyrazine moieties) along the pore wall. IITKGP-40 could convert toxic CO2 to cyclic carbonates in an atom-economical manner under solvent-free conditions and aromatic aldehyde to bioactive 1,4-DHPs via Hantzsch condensation. Exceptional catalytic performance (99%) and turnover number under mild reaction conditions for CO2 fixation using sterically hindered styrene oxide, and good-to-excellent yields for a wide range of aromatic aldehydes toward 1,4-dihydropyridines (1,4-DHPs) make IITKGP-40 promising as a multipurpose heterogeneous catalyst. Moreover, to demonstrate the practical utility of the catalyst, two biologically important drug molecules, diludine and nitrendipine analogue, have also been synthesized. IITKGP-40 is recyclable for at least three consecutive runs without significant loss of activity, making it promising for real-time applications.

Single-Atom Titanium on Mesoporous Nitrogen, Oxygen-Doped Carbon for Efficient Photo-thermal Catalytic CO2 Cycloaddition by a Radical Mechanism

Developing efficient and earth-abundant catalysts for CO2 fixation to high value-added chemicals is meaningful but challenging. Styrene carbonate has great market value, but the cycloaddition of CO2 to styrene oxide is difficult due to the high steric hindrance and weak electron-withdrawing ability of the phenyl group. To utilize clean energy (such as optical energy) directly and effectively for CO2 value-added process, we introduce earth-abundant Ti single-atom into the mesoporous nitrogen, oxygen-doped carbon nanosheets (Ti-CNO) by a two-step method. The Ti-CNO exhibits excellent photothermal catalytic activities and stability for cycloaddition of CO2 and styrene oxide to styrene carbonate. Under light irradiation and ambient pressure, an optimal Ti-CNO produces styrene carbonate with a yield of 98.3 %, much higher than CN (27.1 %). In addition, it shows remarkable stability during 10 consecutive cycles. Its enhanced catalytic performance stems from the enhanced photothermal effect and improved Lewis acidic/basic sites exposed by the abundant mesopores. The experiments and theoretical simulations demonstrate the styrene oxide⋅+ and CO2⋅- radicals generated at the Lewis acidic (Tiδ+) and basic sites of Ti-CNO under light irradiation, respectively. This work furnishes a strategy for synthesizing advanced single-atom catalysts for photo-thermal synergistic CO2 fixation to high value products via a cycloaddition pathway.

Promoted hydrogenation of CO2 to methanol over single-atom Cu sites with Na+-decorated microenvironment

Although single-atom Cu sites exhibit high efficiency in CO2 hydrogenation to methanol, they are prone to forming Cu nanoparticles due to reduction and aggregation under reaction conditions, especially at high temperatures. Herein, single-atom Cu sites stabilized by adjacent Na+ ions have been successfully constructed within a metal-organic framework (MOF)-based catalyst, namely MOF-808-NaCu. It is found that the electrostatic interaction between the Na+ and Hδ- species plays a pivotal role in upholding the atomic dispersion of Cu in MOF-808-NaCu during CO2 hydrogenation, even at temperatures of up to 275°C. This exceptional stabilization effect endows the catalyst with excellent activity (306 g·kgcat-1·h-1), high selectivity to methanol (93%) and long-term stability at elevated reaction temperatures, far surpassing the counterpart in the absence of Na+ (denoted as MOF-808-Cu). This work develops an effective strategy for the fabrication of stable single-atom sites for advanced catalysis by creating an alkali-decorated microenvironment in close proximity.

CO2-Based Stable Porous Metal-Organic Frameworks for CO2 Utilization

The transformation of carbon dioxide (CO2) into functional materials has garnered considerable worldwide interest. Metal-organic frameworks (MOFs), as a distinctive class of materials, have made great contributions to CO2 capture and conversion. However, facile conversion of CO2 to stable porous MOFs for CO2 utilization remains unexplored. Herein, we present a facile methodology of using CO2 to synthesize stable zirconium-based MOFs. Two zirconium-based MOFs CO2-Zr-DEP and CO2-Zr-DEDP with face-centered cubic topology were obtained via a sequential desilylation-carboxylation-coordination reaction. The MOFs exhibit excellent crystallinity, as verified through powder X-ray diffraction and high-resolution transmission electron microscopy analyses. They also have notable porosity with high surface area (SBET up to 3688 m2 g-1) and good CO2 adsorption capacity (up to 12.5 wt %). The resulting MOFs have abundant alkyne functional moieties, confirmed through 13C cross-polarization/magic angle spinning nuclear magnetic resonance and Fourier transform infrared spectra. Leveraging the catalytic prowess of Ag(I) in diverse CO2-involved reactions, we incorporated Ag(I) into zirconium-based MOFs, capitalizing on their interactions with carbon-carbon π-bonds of alkynes, thereby forming a heterogeneous catalyst. This catalyst demonstrates outstanding efficiency in catalyzing the conversion of CO2 and propargylic alcohols into cyclic carbonates, achieving >99% yield at room temperature and atmospheric pressure conditions. Thus, this work provides a dual CO2 utilization strategy, encompassing the synthesis of CO2-based MOFs (20-24 wt % from CO2) and their subsequent application in CO2 capture and conversion processes. This approach significantly enhances overall CO2 utilization.

Synergistic effects of core-shell poly(ionic liquids)@ZIF-8 nanocomposites for enhancing additive-free CO2 conversion

The present study, for the first time, reports the fabrication of core-shell poly(ionic liquids)@ZIF-8 nanocomposites through a facile in-situ polymerization strategy. These composites exhibited exceptional structural characteristics including high specific surface areas and the integration of high-density Lewis acid/base and nucleophilic active sites. The structure-activity relationship, reusability, and versatility of the poly(ionic liquids)@ZIF-8 composites were investigated for the cycloaddition reaction between CO2 and epoxide. By optimizing the composites structures and their catalytic performance, PIL-Br@ZIF-8(2:1) was identified as an exciting catalyst that exhibits high activity and selectivity in the synthesis of various cyclic carbonates under mild or even atmospheric pressure or simulated flue gas conditions. Moreover, the catalyst demonstrated excellent structural stability while maintaining its catalytic activity throughout multiple usage cycles. By combining DFT calculations, we investigated the transition states and intermediate geometries of the cycloaddition reaction in different coordination microenvironments, thereby proposing a synergistic catalytic mechanism involving multiple active sites.

Conjugated Microporous Polymers for Catalytic CO2 Conversion

Rising carbon dioxide (CO2) levels in the atmosphere are recognized as a threat to atmospheric stability and life. Although this greenhouse gas is being produced on a large scale, there are solutions to reduction and indeed utilization of the gas. Many of these solutions involve costly or unstable technologies, such as air-sensitive metal-organic frameworks (MOFs) for CO2 capture or "non-green" systems such as amine scrubbing. Conjugated microporous polymers (CMPs) represent a simpler, cheaper, and greener solution to CO2 capture and utilization. They are often easy to synthesize at scale (a one pot reaction in many cases), chemically and thermally stable (especially in comparison with their MOF and covalent organic framework (COF) counterparts, owing to their amorphous nature), and, as a result, cheap to manufacture. Furthermore, their large surface areas, tunable porous frameworks and chemical structures mean they are reported as highly efficient CO2 capture motifs. In addition, they provide a dual pathway to utilize captured CO2 via chemical conversion or electrochemical reduction into industrially valuable products. Recent studies show that all these attractive properties can be realized in metal-free CMPs, presenting a truly green option. The promising results in these two fields of CMP applications are reviewed and explored here.

Regulation Strategy of Nanostructured Engineering on Indium-Based Materials for Electrocatalytic Conversion of CO2

Electrochemical carbon dioxide reduction (CO2 RR), as an emerging technology, can combine with sustainable energies to convert CO2 into high value-added products, providing an effective pathway to realize carbon neutrality. However, the high activation energy of CO2 , low mass transfer, and competitive hydrogen evolution reaction (HER) leads to the unsatisfied catalytic activity. Recently, Indium (In)-based materials have attracted significant attention in CO2 RR and a series of regulation strategies of nanostructured engineering are exploited to rationally design various advanced In-based electrocatalysts, which forces the necessary of a comprehensive and fundamental summary, but there is still a scarcity. Herein, this review provides a systematic discussion of the nanostructure engineering of In-based materials for the efficient electrocatalytic conversion of CO2 to fuels. These efficient regulation strategies including morphology, size, composition, defects, surface modification, interfacial structure, alloying, and single-atom structure, are summarized for exploring the internal relationship between the CO2 RR performance and the physicochemical properties of In-based catalysts. The correlation of electronic structure and adsorption behavior of reaction intermediates are highlighted to gain in-depth understanding of catalytic reaction kinetics for CO2 RR. Moreover, the challenges and opportunities of In-based materials are proposed, which is expected to inspire the development of other effective catalysts for CO2 RR.

Two isostructural Zn/Co-MOFs with penetrating structures: multifunctional properties of both luminescence sensing and conversion of CO2 into cyclic carbonates

Two new metal-organic frameworks (MOFs), namely, {[Zn(HL)(bpea)]·DMF}n (Zn-MOF-1) and {[Co(HL)(bpea)]·DMF}n (Co-MOF-2) (H3L = 3-(3,5-dicarboxybenzyloxy)benzoic acid, bpea = 1,2-di(pyridyl)ethane), were obtained by the reaction of H3L and N-containing ligand bpea with Zn(NO3)2·6H2O and Co(NO3)2·6H2O, respectively. The isomorphic Zn-MOF-1 and Co-MOF-2 featured a 3D penetrating framework with different stabilities, luminescence, and catalytic properties. Luminescence measurement indicated that Zn-MOF-1 could be used to detect Al3+ through a turn-on effect with a detection limit of 0.42 μM. The sensing mechanism experiments showed that the enhanced luminescence of Zn-MOF-1 toward Al3+ may be due to the weak interaction between Al3+ and Zn-MOF-1 and the absorbance-caused enhancement (ACE) mechanism. Meanwhile, both Zn-MOF-1 and Co-MOF-2 showed interesting CO2 adsorption properties and could catalyze the cycloaddition of CO2 to epoxides resulting in 96 and 92% ideal products within 12 hours, respectively. They can be cycled up to 5 times without significant loss of catalytic efficiency.

Natural Products Derived Porous Carbons for CO2 Capture

As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2 ) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products-derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high-quality value-added functional porous carbon-based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products-derived porous carbons for CO2 capture.

Highly Efficient Electroreduction of CO2 to Ethanol via Asymmetric C-C Coupling by a Metal-Organic Framework with Heterodimetal Dual Sites

The electroreduction of CO2 into value-added liquid fuels holds great promise for addressing global environmental and energy challenges. However, achieving highly selective yielding of multi-carbon oxygenates through the electrochemical CO2 reduction reaction (eCO2RR) is a formidable task, primarily due to the sluggish asymmetric C-C coupling reaction. In this study, a novel metal-organic framework (CuSn-HAB) with unprecedented heterometallic Sn···Cu dual sites (namely, a pair of SnN2O2 and CuN4 sites bridged by μ-N atoms) was designed to overcome this limitation. CuSn-HAB demonstrated an impressive Faradic efficiency (FE) of 56(2)% for eCO2RR to alcohols, achieving a current density of 68 mA cm-2 at a low potential of -0.57 V (vs RHE). Notably, no significant degradation was observed over a continuous 35 h operation at the specified current density. Mechanistic investigations revealed that, in comparison to the copper site, the SnN2O2 site exhibits a higher affinity for oxygen atoms. This enhanced affinity plays a pivotal role in facilitating the generation of the key intermediate *OCH2. Consequently, compared to homometallic Cu···Cu dual sites (generally yielding ethylene product), the heterometallic dual sites were proved to be more thermodynamically favorable for the asymmetric C-C coupling between *CO and *OCH2, leading to the formation of the key intermediate *CO-*OCH2, which is favorable for yielding ethanol product.

Stable Pyrene-Based Metal-Organic Framework for Cyclization of Propargylic Amines with CO2 and Detection of Antibiotics in Water

A pyrene-based metal-organic framework, Cd2(PTTB)(H2O)2 (WYU-11), was synthesized from the tetracarboxylic pyrene ligand H4PTTB (H4PTTB = 1,3,6,8-tetrakis(3-carboxyphenyl)pyrene) and Cd(NO3)2·4H2O. Powder X-ray diffraction analysis discloses that the framework is stable in acid, base, and various organic solvent environments. WYU-11 shows excellent catalytic performance on the cyclization reaction of propargylic amines with CO2 into 2-oxazolidinones under mild conditions (60 °C, atmospheric CO2). 1H NMR studies unveiled that WYU-11 and 1,1,3,3-tetramethylguanidine (TMG) can synergistically activate the propargylic amine substrate and promote the reaction. Importantly, WYU-11 represents a rare example of noble metal-free heterogeneous catalyst that can catalyze the cyclization of CO2 with propargylic amines. In addition, by virtue of the excellent water stability and luminescence properties, WYU-11 shows excellent detection performance for sulfathiazole (STZ) and ornidazole (ODZ) in water. Investigation reveals that the coexistence of photoinduced electron transfer and internal filtering effect could reasonably explain the luminescence quenching of WYU-11 by the antibiotics.